As noted in
<https://sourceware.org/ml/libc-alpha/2013-10/msg00516.html>, the
soft-fp macro FP_CLEAR_EXCEPTIONS should not be necessary, as soft-fp
code should never set an exception and later clear it.
In fact, all four uses in glibc (for SPARC) are indeed unnecessary:
they appear in files that convert 32-bit or 64-bit integers to IEEE
binary128, an operation that can never raise any exceptions. If this
was intended to enable the compiler to optimize away any FP_FROM_INT
code testing for exceptional cases, we now have a better way of doing
this: defining FP_NO_EXCEPTIONS before including soft-fp.h causes all
code handling exceptions to be stubbed out, and the rounding mode to
be hardwired for round-to-zero, to allow such optimizations for source
files where (a) the operation in question, for the particular types in
question, can never raise exceptions, but (b) some instances of the
operation for other types can, so the macros used in the file do
contain references to rounding or exceptions, albeit dead in that
particular file.
The uses in the Linux kernel are also unnecessary (clearing exceptions
at a point where they are already cleared).
This patch duly removes FP_CLEAR_EXCEPTIONS, making the SPARC code in
question use FP_NO_EXCEPTIONS and stop using exception-related macros.
* soft-fp/soft-fp.h (FP_CLEAR_EXCEPTIONS): Remove macro.
* sysdeps/sparc/sparc32/soft-fp/q_itoq.c: Define FP_NO_EXCEPTIONS.
(_Q_itoq): Do not use FP_DECL_EX, FP_CLEAR_EXCEPTIONS or
FP_HANDLE_EXCEPTIONS.
* sysdeps/sparc/sparc32/soft-fp/q_lltoq.c: Define FP_NO_EXCEPTIONS.
(_Q_lltoq): Do not use FP_DECL_EX, FP_CLEAR_EXCEPTIONS or
FP_HANDLE_EXCEPTIONS.
* sysdeps/sparc/sparc32/soft-fp/q_ulltoq.c: Define FP_NO_EXCEPTIONS.
(_Q_ulltoq): Do not use FP_DECL_EX, FP_CLEAR_EXCEPTIONS or
FP_HANDLE_EXCEPTIONS.
* sysdeps/sparc/sparc32/soft-fp/q_utoq.c: Define FP_NO_EXCEPTIONS.
(_Q_utoq): Do not use FP_DECL_EX, FP_CLEAR_EXCEPTIONS or
FP_HANDLE_EXCEPTIONS.
Bug 14132 is removal of the old INTDEF/INTUSE system of *_internal
aliases as obsoleted by the hidden_proto / hidden_def system. Various
cases were cleaned up in 2012, but some remain. This patch removes
the use of this mechanism for __adjtimex.
Tested for x86_64 that stripped installed shared libraries are
unchanged by the patch.
[BZ #14132]
* sysdeps/unix/sysv/linux/include/sys/timex.h: New file.
* sysdeps/unix/sysv/linux/adjtime.c [!ADJTIMEX] (ADJTIMEX): Do not
use INTUSE.
[!ADJTIMEX] (INTUSE(__adjtimex)): Remove declaration.
* sysdeps/unix/sysv/linux/alpha/adjtime.c (__adjtimex_internal):
Remove alias.
(__adjtimex): Define using libc_hidden_ver.
* sysdeps/unix/sysv/linux/ntp_gettime.c (INTUSE(__adjtimex)):
Remove declaration.
(ntp_gettime): Call __adjtimex directly.
* sysdeps/unix/sysv/linux/ntp_gettimex.c (INTUSE(__adjtimex)):
Remove declaration.
(ntp_gettimex): Call __adjtimex directly.
* sysdeps/unix/sysv/linux/syscalls.list (adjtimex): Remove
__adjtimex_internal alias.
This patch enables syscalls.list entries to specify both compat and
non-compat symbol versions for the same syscall definition, making use
of this for setrlimit / chown / lchown where the inability to specify
such aliases showed up in the course of work on bug 14138.
The change to make-syscalls.sh is minimal: adding a SHARED conditional
on the compat_symbol calls. It remains the case that if a compat
symbol version is specified, the syscall is only built for the shared
library at all if an explicit symbol version is given for a non-compat
symbol (so it's necessary to specify "lchown@@GLIBC_2.0
chown@GLIBC_2.0" rather than just "lchown chown@GLIBC_2.0"). It also
remains the case, as already commented in make-syscalls.sh, that no
SHLIB_COMPAT conditionals are generated, so there would be problems if
the same syscalls.list file, with compat symbols, were used for both
configurations that should have those symbols and configurations for
which they should be conditioned out with SHLIB_COMPAT.
Tested for x86.
* sysdeps/unix/make-syscalls.sh (emit_weak_aliases): Condition
compat_symbol calls on [SHARED].
* sysdeps/unix/sysv/linux/powerpc/lchown.S: Remove file.
* sysdeps/unix/sysv/linux/i386/syscalls.list (oldsetrlimit):
Remove.
(setrlimit): Add setrlimit@GLIBC_2.0 alias.
* sysdeps/unix/sysv/linux/m68k/m680x0/syscalls.list
(oldsetrlimit): Remove.
(setrlimit): Add setrlimit@GLIBC_2.0 alias.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list
(lchown): New syscall entry.
(oldsetrlimit): Remove.
(setrlimit): Add setrlimit@GLIBC_2.0 alias.
* sysdeps/unix/sysv/linux/s390/s390-32/syscalls.list
(oldsetrlimit): Remove.
(setrlimit): Add setrlimit@GLIBC_2.0 alias.
Continuing the move of syscall definitions to syscalls.list, where the
removal of support for old kernel versions has made this possible,
this patch moves various definitions of chown, lchown and fchown.
In most cases the need for special syscalls.list entries (rather than
existing generic ones) is because these architectures use chown32,
lchown32 and fchown32 as syscall names. Some architectures also have
symbol versioning compatibility for older versions of chown having
been equivalent to lchown.
In the case of powerpc, chown.c (providing the chown@@GLIBC_2.1
default version) is replaced by a syscalls.list entry (for powerpc32;
powerpc64 has no need for this because of its more recent minimum
symbol version, so can just use the entry in
sysdeps/unix/syscalls.list), but lchown.S is left as-is because it
provides the compat version of chown as an actual alias for __lchown,
which is not yet supported by syscalls.list. This file can be removed
once such aliases are supported in syscalls.list.
[BZ #14138]
* sysdeps/unix/sysv/linux/arm/fchown.c: Remove file.
* sysdeps/unix/sysv/linux/arm/lchown.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/fchown.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/lchown.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/chown.c: Likewise.
* sysdeps/unix/sysv/linux/arm/syscalls.list (lchown): Add syscall.
(fchown): Likewise.
* sysdeps/unix/sysv/linux/m68k/syscalls.list (lchown): Likewise.
(fchown): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list (chown):
Likewise.
Customize memcmp.c for tile, using similar tricks from memcpy:
- replace MERGE macro with dblalign.
- replace memcmp_bytes function with revbytes.
- use __glibc_likely.
- use post-increment addressing.
The schedule is still not perfect: the compiler is not hoisting
code above the comparison branch, which could save a bundle or two.
memcmp speeds up by 30-40% on shorter aligned tests in benchtest,
with some tests with unaligned lengths taking a small performance hit.
strnlen() is based on the existing tile strlen() with length
checking added. It speeds up by up to 5x, but on average across
the benchtest corpus by around 35%. No regressions are seen.
strstr() does 8-byte aligned loads and compares using a 2-byte
filter on the first two bytes of the needle and then testing
the remaining bytes in needle using memcmp(). It speeds up
about 5x in the best case (for "found" needles), about 2x looking
at benchtest as a whole, with some slowdowns as much as 45%.
on a few cases (including the "fail" case for 128KB search).
strcasestr() is based on strstr() but uses a SIMD tolower
routine to convert 8-bytes to lower case in 5 instructions.
It also uses a 2-byte filter and then strncasecmp() for the
remaining bytes. strncasecmp() is not optimized for SIMD, so
there is futher room for improvement. However, it is still up
to 16x faster for "found" needles, averaging 2x faster on the
whole corpus of benchtests. It does slow down by up to 35%
on a few cases, similarly to strstr().
Continuing the move of syscall definitions to syscalls.list, where
previous cleanups have made this possible, this patch moves the
definition of execve. (In this case, it was the removal of bounded
pointers support, rather than old kernel support, which made the move
possible.)
Tested for x86_64.
[BZ #14138]
* sysdeps/unix/sysv/linux/execve.c: Remove file.
* sysdeps/unix/sysv/linux/syscalls.list (execve): Add syscall.
Continuing the move of syscall definitions to syscalls.list, where the
removal of support for old kernel versions has made this possible,
this patch moves definitions of various *at functions in
sysdeps/unix/sysv/linux/.
These particular moves are straightforward: there are no #includes of
these source files, no special architecture-specific versions, no
special symbol version handling and no aliases. Each source file can
be replaced by a single line in sysdeps/unix/sysv/linux/syscalls.list.
Tested for x86_64.
[BZ #14138]
* sysdeps/unix/sysv/linux/syscalls.list (fchownat): New syscall.
(linkat): Likewise.
(mkdirat): Likewise.
(readlinkat): Likewise.
(renameat): Likewise.
(symlinkat): Likewise.
(unlinkat): Likewise.
* sysdeps/unix/sysv/linux/fchownat.c: Remove file.
* sysdeps/unix/sysv/linux/linkat.c: Likewise.
* sysdeps/unix/sysv/linux/mkdirat.c: Likewise.
* sysdeps/unix/sysv/linux/readlinkat.c: Likewise.
* sysdeps/unix/sysv/linux/renameat.c: Likewise.
* sysdeps/unix/sysv/linux/symlinkat.c: Likewise.
* sysdeps/unix/sysv/linux/unlinkat.c: Likewise.
Building this test on ARM fails because the prototypes for the long
double variants of the math functions are unavailable.
Add an additional include guard to math.h that enables long double math
function declarations if _LIBC_TEST is defined and define _LIBC_TEST in
stdlib/tst-strtod-round.c.
ChangeLog:
2014-09-30 Will Newton <will.newton@linaro.org>
* math/math.h: Define long double math functions if
_LIBC_TEST is defined.
* stdlib/tst-strtod-round.c: Define _LIBC_TEST.
Allow building tests in a cross configuration without a test wrapper
defined. This is helpful for doing simple build testing of tests.
ChangeLog:
2014-09-30 Will Newton <will.newton@linaro.org>
* localedata/Makefile: Move assignment to tests-special
into an ifdef testing run-built-tests.
* timezone/Makefile: Likewise.
tst-ld-sse-use.sh is a bash script, not a POSIX shell script, and so
needs to be run with $(BASH) not $(SHELL) to avoid errors of the form:
../sysdeps/x86/tst-ld-sse-use.sh: 41: ../sysdeps/x86/tst-ld-sse-use.sh: declare: not found
(when /bin/sh is dash). This patch makes that change.
Tested for x86_64.
* sysdeps/x86/Makefile ($(objpfx)tst-ld-sse-use.out): Run script
with $(BASH) not $(SHELL).
During auditing or profiling modes the dynamic loader
builds a cache of the relocated PLT entries in order
to reuse them when called again through the same PLT
entry. This way the PLT entry is never completed and
the call into the resolver always results in profiling
or auditing code running.
The problem is that the PLT relocation cache size
is not computed correctly. The size of the cache
should be "Size of a relocation result structure"
x "Number of PLT-related relocations". Instead the
code erroneously computes "Size of a relocation
result" x "Number of bytes worth of PLT-related
relocations". I can only assume this was a mistake
in the understanding of the value of DT_PLTRELSZ
which is the number of bytes of PLT-related relocs.
We do have a DT_RELACOUNT entry, which is a count
for dynamic relative relocs, but we have no
DT_PLTRELCOUNT and thus we need to compute it.
This patch corrects the computation of the size of the
relocation table used by the glibc profiling code.
For more details see:
https://sourceware.org/ml/libc-alpha/2014-09/msg00513.html
[BZ #17411]
* elf/dl-reloc.c (_dl_relocate_object): Allocate correct amount for
l_reloc_result.
When a shlib-versions file has a DEFAULT line, it's not necessary to
specify the same default minimum symbol version on the lines for
individual libraries. If those lines otherwise duplicate the default
SONAME for the library in question, they can be removed completely.
This patch makes such cleanups: version entries for ld.so are removed
(leaving just the definition of the architecture-specific dynamic
linker name) and entries for libpthread are removed completely (since
the default is libpthread.so.0).
Tested for x86_64 that the installed shared libraries are unchanged by
this patch.
There are various architectures (hppa, ia64, mips, sh, sparc64) that
define minimum symbol versions (or in the case of mips, omission of
symbol versions) only for particular libraries without a DEFAULT line.
None of these are equivalent to something simpler with a DEFAULT line
because all have some other libraries, not explicitly mentioned, with
symbol versions that would be omitted were such a line used. In the
mips case I'm pretty sure it was a mistake not to omit the 2.1 symbols
for libthread_db; for the others I don't know if it was a mistake or
deliberate that some symbols in various libraries have 2.0 or 2.1
versions despite other libraries having a 2.2 minimum.
This concludes the shlib-versions cleanups I'm aware of.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions: Do not
specify symbol version for ld.so. Do not include entry for
libpthread.
* sysdeps/unix/sysv/linux/s390/s390-64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/shlib-versions: Likewise.
This patch eliminates the mixture of SONAME information in
shlib-versions files and SONAME information used to generate
gnu/lib-names.h in makefiles, with the information in the makefiles
being removed so all this information comes from the shlib-versions
files.
So that gnu/lib-names.h supports multiple ABIs, it is changed to be
generated on the same basis as gnu/stubs.h: when there are multiple
ABIs, gnu/lib-names.h is a wrapper header (the same header installed
whatever ABI is being built) and separate headers such as
gnu/lib-names-64.h contain the substantive contents (only one such
header being installed by any glibc build).
The rules for building gnu/lib-names.h were moved from Makeconfig to
Makerules because they need to come after sysdeps makefiles are
included (now that "ifndef abi-variants" is a toplevel conditional on
the rules rather than $(abi-variants) being evaluated later inside the
commands for a rule).
Tested for x86_64 and x86 that the installed shared libraries are
unchanged by this patch, and examined the installed gnu/lib-names*.h
headers by hand. Also tested the case of a single ABI (where there is
just a single header installed, again like stubs.h) by hacking
abi-variants to empty for x86_64.
[BZ #14171]
* Makeconfig [$(build-shared) = yes]
($(common-objpfx)soversions.mk): Don't handle SONAMEs specified in
makefiles.
[$(build-shared) = yes && $(soversions.mk-done) = t]
($(common-objpfx)gnu/lib-names.h): Remove rule.
[$(build-shared) = yes && $(soversions.mk-done) = t]
($(common-objpfx)gnu/lib-names.stmp): Likewise. Split and moved
to Makerules.
[$(build-shared) = yes && $(soversions.mk-done) = t]
(before-compile): Don't append $(common-objpfx)gnu/lib-names.h
here.
[$(build-shared) = yes && $(soversions.mk-done) = t]
(common-generated): Don't append gnu/lib-names.h and
gnu/lib-names.stmp here.
* Makerules [$(build-shared) = yes && $(soversions.mk-done) = t]
(lib-names-h-abi): New variable.
[$(build-shared) = yes && $(soversions.mk-done) = t]
(lib-names-stmp-abi): Likewise.
[$(build-shared) = yes && $(soversions.mk-done) = t &&
abi-variants] (before-compile): Append
$(common-objpfx)$(lib-names-h-abi).
[$(build-shared) = yes && $(soversions.mk-done) = t &&
abi-variants] (common-generated): Append gnu/lib-names.h.
[$(build-shared) = yes && $(soversions.mk-done) = t &&
abi-variants] (install-others-nosubdir): Depend on
$(inst_includedir)/$(lib-names-h-abi).
[$(build-shared) = yes && $(soversions.mk-done) = t &&
abi-variants] ($(common-objpfx)gnu/lib-names.h): New rule.
[$(build-shared) = yes && $(soversions.mk-done) = t]
($(common-objpfx)$(lib-names-h-abi)): New rule.
[$(build-shared) = yes && $(soversions.mk-done) = t]
($(common-objpfx)$(lib-names-stmp-abi)): Likewise.
[$(build-shared) = yes && $(soversions.mk-done) = t]
(common-generated): Append $(lib-names-h-abi) and
$(lib-names-stmp-abi).
* scripts/lib-names.awk: Do not handle multi being set.
* sysdeps/unix/sysv/linux/aarch64/Makefile (abi-lp64-ld-soname):
Remove variable.
(abi-lp64_be-ld-soname): Likewise.
* sysdeps/unix/sysv/linux/arm/Makefile (abi-soft-ld-soname):
Likewise.
(abi-hard-ld-soname): Likewise.
* sysdeps/unix/sysv/linux/i386/shlib-versions: New file.
* sysdeps/unix/sysv/linux/mips/Makefile (abi-o32_soft-ld-soname):
Remove variable.
(abi-o32_hard-ld-soname): Likewise.
(abi-o32_soft_2008-ld-soname): Likewise.
(abi-o32_hard_2008-ld-soname): Likewise.
(abi-n32_soft-ld-soname): Likewise.
(abi-n32_hard-ld-soname): Likewise.
(abi-n32_soft_2008-ld-soname): Likewise.
(abi-n32_hard_2008-ld-soname): Likewise.
(abi-n64_soft-ld-soname): Likewise.
(abi-n64_hard-ld-soname): Likewise.
(abi-n64_soft_2008-ld-soname): Likewise.
(abi-n64_hard_2008-ld-soname): Likewise.
* sysdeps/unix/sysv/linux/powerpc/Makefile (abi-64-v1-ld-soname):
Likewise.
(abi-64-v2-ld-soname): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions: Add
ld.so entries.
* sysdeps/unix/sysv/linux/s390/Makefile (abi-64-ld-soname): Remove
variable.
* sysdeps/unix/sysv/linux/s390/s390-64/shlib-versions: Add ld.so
entry.
* sysdeps/unix/sysv/linux/x86/Makefile (abi-32-ld-soname): Remove
variable.
(abi-64-ld-soname): Likewise.
(abi-x32-ld-soname): Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/shlib-versions: Add ld.so
entry.
* sysdeps/unix/sysv/linux/x86_64/x32/shlib-versions: Likewise.
Bug 14138 is followup cleanup after removal of support for old Linux
kernel versions: moving syscalls to syscalls.list where the only
reason for using C definitions was kernel version conditionals that
are no longer present.
This patch deals with the case of setrlimit
(sysdeps/unix/sysv/linux/i386/setrlimit.c, included by various other
architectures). Where needed (where there is also a compat symbol for
setrlimit@GLIBC_2.0), new syscalls.list entries are added. Where not
needed (where there is no such compat symbol and the minimum symbol
version for libc is 2.2 or later), no such entries are added as that
in sysdeps/unix/syscalls.list will suffice. Thus arm and sh need no
such entries, while m68k and powerpc need entries only in a
subdirectory syscalls.list file rather than for all configurations
that previously used setrlimit.c.
(setrlimit@@GLIBC_2.2 and setrlimit@GLIBC_2.0 are now semantically
identical - the new symbol version was about a change of types from
signed to unsigned and the former compatibility code for dealing with
large unsigned arguments on old kernels is no longer needed or
present, having been removed with support for pre-2.4 kernels.
However, making the two versions into aliases doesn't work at present:
the case of having both default and non-default symbol versions on the
same syscalls.list line results in a compat_symbol call in code built
for static libc, which doesn't compile. I don't suppose it would be
hard to generate SHARED conditionals from make-syscalls.sh to fix
this, but in any case this patch doesn't make things any worse, as the
functions weren't aliases before the patch either.)
Tested for x86, and ran ABI tests for ARM as an example of an
architecture where the setrlimit.c file was just removed without
adding syscalls.list entries.
[BZ #14138]
* sysdeps/unix/sysv/linux/arm/setrlimit.c: Remove file.
* sysdeps/unix/sysv/linux/i386/setrlimit.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/setrlimit.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/setrlimit.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/setrlimit.c: Likewise.
* sysdeps/unix/sysv/linux/sh/setrlimit.c: Likewise.
* sysdeps/unix/sysv/linux/i386/syscalls.list (setrlimit): Add
syscall entry for GLIBC_2.2 symbol version.
* sysdeps/unix/sysv/linux/m68k/m680x0/syscalls.list (setrlimit):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list
(setrlimit): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/syscalls.list (setrlimit):
Likewise.
sysdep.h was defining _SYS_AUXV_H in order to avoid an include guard check
in hwcap.h. Unfortunately it didn't undefine it so it could leak out into
code and caused a build failure with -Wimplicit-function-declaration
building tst-auxv on ARM.
ChangeLog:
2014-09-23 Will Newton <will.newton@linaro.org>
* sysdeps/unix/sysv/linux/arm/bits/hwcap.h: Check for
_LINUX_ARM_SYSDEP_H include guard too.
* sysdeps/unix/sysv/linux/arm/sysdep.h (_SYS_AUXV_H): Remove
define.
This test verifies the sanity of ftime and exposes bugs such as BZ
2014-09-17 Arjun Shankar <arjun.is@lostca.se>
* time/tst-ftime.c: New test.
* time/Makefile (tests): Add tst-ftime.
This patch fixes formatting of comments in soft-fp (in particular, the
normal style in glibc does not have a leading '*' on each line, and
comments should start with capital letters and end with ". */").
Tested for powerpc-nofpu that the disassembly of installed shared
libraries is unchanged by this patch.
* soft-fp/extended.h: Fix comment formatting.
* soft-fp/op-1.h: Likewise.
* soft-fp/op-2.h: Likewise.
* soft-fp/op-4.h: Likewise.
* soft-fp/op-8.h: Likewise.
* soft-fp/op-common.h: Likewise.
* soft-fp/soft-fp.h: Likewise.
This patch corrects some soft-fp formatting that failed to follow the
GNU Coding Standards.
Tested for powerpc-nofpu that the disassembly of installed shared
libraries is unchanged by this patch.
* soft-fp/op-common.h (_FP_TO_INT): Correct formatting.
This patch removes the --enable-oldest-abi configure option, which has
long been bitrotten (as reported in bug 6652). The principle of
removing this option was agreed in the thread starting at
<https://sourceware.org/ml/libc-alpha/2013-07/msg00174.html>.
Tested for x86_64 and x86 that the installed shared libraries other
than libc.so are unchanged by this patch and that libc.so disassembly
and symbol versions are unchanged (debug info changes because of
changed line numbers in csu/version.c).
[BZ #6652]
* Makeconfig (soversions-default-setname): Remove variable.
($(common-objpfx)soversions.i): Don't pass default_setname to
soversions.awk.
* Makerules ($(common-objpfx)abi-versions.h): Don't pass
oldest_abi to abi-versions.awk.
* config.h.in (GLIBC_OLDEST_ABI): Remove macro undefine.
* config.make.in (oldest-abi): Remove variable.
* configure.ac (--enable-oldest-abi): Remove configure option.
* configure: Regenerated.
* csu/version.c (banner) [GLIBC_OLDEST_ABI]: Remove conditional
text.
* scripts/abi-versions.awk: Do not handle oldest_abi variable.
* scripts/soversions.awk: Do not handle default_setname variable.
* sysdeps/mach/hurd/configure.ac: Do not handle oldest_abi
variable.
* sysdeps/mach/hurd/configure: Regenerated.
* sysdeps/unix/sysv/linux/configure.ac: Do not handle oldest_abi
variable.
* sysdeps/unix/sysv/linux/configure: Regenerated.
Replace it with including an auto-generated linker-runtime.h.
Build-tested on x86_64 and found that there was no change in the
generated code.
* elf/Makefile (CFLAGS-interp.c): Remove.
($(elf-objpfx)runtime-linker.h): Generate header with linker
path string.
* elf/interp.c: Include generated runtime-linker.h
Barring libc.so and libdl.so, none of the libraries have any entry
points, so it is pointless to add a .interp section for them. The
libdl.so entry point (in dlfcn/eval.c) is also defunct, so remove that
file as well.
Build tested for x86_64, ppc64 and s390x. I have not moved
CFLAGS-interp.c to CPPFLAGS-interp.c isnce I'll be removing it
completely in a follow-up patch.
Siddhesh
* Makerules (lib%.so): Don't include $(+interp) in
prerequisites.
* elf/Makefile (CFLAGS-interp.c): Don't define NOT_IN_libc.
* dlfcn/eval.c: Remove file.
The fix for BZ #17266 (884ddc5081)
removed changes that had gone into cdefs.h to make
__extern_always_inline usable with clang++. This patch adds back
support for clang to detect if GNU inlining semantics are available,
this time without breaking the gcc use case. The check put here is
based on the earlier patch and assertion[1] that checking if
__GNUC_STDC_INLINE__ or __GNUC_GNU_INLINE__ is defined is sufficient
to determine that clang++ suports GNU inlining semantics.
Tested with a simple program that builds with __extern_always_inline
with the patch and fails compilation without it.
#include <stdio.h>
#include <sys/cdefs.h>
extern void foo_alias (void) __asm ("foo");
__extern_always_inline void
foo (void)
{
puts ("hi oh world!");
return foo_alias ();
}
void
foo_alias (void)
{
puts ("hell oh world");
}
int
main ()
{
foo ();
}
[1] https://sourceware.org/ml/libc-alpha/2012-12/msg00306.html
[BZ #17266]
* misc/sys/cdefs.h: Define __extern_always_inline for clang
4.2 and newer.
The check for only __GNUC_STDC_INLINE__ and __GNUC_GNU_INLINE__ may
not be sufficient since those flags were added during initial support
for C99 inlining semantics. There is also a problem with always
defining __extern_inline and __extern_always_inline, since it enables
inline wrapper functions even when GNU inlining semantics are not
guaranteed. This, along with the possibility of such wrappers using
redirection (btowc for example) could result in compiler generating an
infinitely recusrive call to the function.
In fact it was such a recursion that led to this code being written
the way it was; see:
https://bugzilla.redhat.com/show_bug.cgi?id=186410
The initial change was to fix bugs 14530 and 13741, but they can be
resolved by checking if __fortify_function and/or
__extern_always_inline are defined, as it has been done in this patch.
In addition, I have audited uses of __extern_always_inline to make
sure that none of the uses result in compilation errors.
There is however a regression in this patch for llvm, since it reverts
the llvm expectation that __GNUC_STDC_INLINE__ or __GNUC_GNU_INLINE__
definition imply proper extern inline semantics.
2014-09-16 Siddhesh Poyarekar <siddhesh@redhat.com>
Jakub Jelinek <jakub@redhat.com>
[BZ #17266]
* libio/stdio.h: Check definition of __fortify_function
instead of __extern_always_inline to include bits/stdio2.h.
* math/bits/math-finite.h [__USE_XOPEN || __USE_ISOC99]: Also
check if __extern_always_inline is defined.
[__USE_MISC || __USE_XOPEN]: Likewise.
[__USE_ISOC99] Likewise.
* misc/sys/cdefs.h (__fortify_function): Define only if
__extern_always_inline is defined.
[!__cplusplus || __GNUC_PREREQ (4,3)]: Revert to defining
__extern_always_inline and __extern_inline only for g++-4.3
and newer or a compatible gcc.
There is no _POSIX_REGEX_VERSION, so don't check for it.
_REGEX_VERSION has been removed as well[1], so only keep the -1 return
for backward compatibility. I found this when trying to make the
getconf environment variables typo-proof.
* sysdeps/posix/sysconf.c (__sysconf): Return -1 for
_SC_REGEX_VERSION.
[1] http://pubs.opengroup.org/onlinepubs/009695399/functions/sysconf.html
getconf only recognizes IPV6 and RAW_SOCKETS, when the standard
requires it to recognize the actual configuration variable name[1]. I
have not removed the earlier names for compatibility.
* posix/getconf.c (vars): Add _POSIX_IPV6 and
_POSIX_RAW_SOCKETS.
[1] http://pubs.opengroup.org/onlinepubs/007904875/functions/sysconf.html
