The clone3 flag resets all signal handlers of the child not set to
SIG_IGN to SIG_DFL. It allows to skip most of the sigaction calls
to setup child signal handling, where previously a posix_spawn
had to issue 2 times NSIG sigaction calls (one to obtain the current
disposition and another to set either SIG_DFL or SIG_IGN).
With POSIX_SPAWN_SETSIGDEF the child will setup the signal for the case
where the disposition is SIG_IGN.
The code must handle the fallback where clone3 is not available. This is
done by splitting __clone_internal_fallback from __clone_internal.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
All internal callers of __clone3 should provide an already aligned
stack. Removing the stack alignment in __clone3 is a net gain: it
simplifies the internal function contract (mask/unmask signals) along
with the arch-specific code.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Different than kernel, clone3 returns EINVAL for NULL struct
clone_args or function pointer. This is similar to clone
interface that return EINVAL for NULL function argument.
It also clean up the Linux clone3.h interface, since it not
currently exported.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
There is no need to issue another sigaction if the disposition is
already SIG_DFL.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Occurs when `src` has no null-term.
Two cases:
1) Zero-length check is doing:
```
test %rdx, %rdx
jl L(zero_len)
```
which doesn't actually check zero (was at some point `decq` and the
flag never got updated).
The fix is just make the flag `jle` i.e:
```
test %rdx, %rdx
jle L(zero_len)
```
2) Length check in page-cross case checking if we should continue is
doing:
```
cmpq %r8, %rdx
jb L(page_cross_small)
```
which means we will continue searching for null-term if length ends at
the end of a page and there was no null-term in `src`.
The fix is to make the flag:
```
cmpq %r8, %rdx
jbe L(page_cross_small)
```
All AMD architectures cache details will be computed based on
__cpuid__ `0x8000_001D` and the reference to __cpuid__ `0x8000_0006` will be
zeroed out for future architectures.
Reviewed-by: Premachandra Mallappa <premachandra.mallappa@amd.com>
Use shrn for narrowing the mask which simplifies code and speeds up small
strings. Unroll the first search loop to improve performance on large
strings.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Optimize strnlen using the shrn instruction and improve the main loop.
Small strings are around 10% faster, large strings are 40% faster on
modern CPUs.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Simplify calculation of the mask using shrn. Unroll the main loop.
Small strings are 20% faster on modern CPUs.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Use shrn for the mask, merge tst+bne into cbnz, and tweak code alignment.
Performance improves slightly as a result.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
The patch suppress the same warnings from 87c266d758,
that shows issues for microblaze, mips soft-fp, nios2, and or1k.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Fix the following issues with built-in function use in
sysdeps/ieee754/ldbl-128 and sysdeps/ieee754/float128:
* fabsl used __builtin_fabsf128 unconditionally, breaking the build
with GCC 6 for several architectures; it should use __builtin_fabsl
with an appropriate redirection in float128_private.h. (I'm not
particularly concerned with building glibc with GCC 6; rather, I
want to be able to run the tgmath.h tests with GCC 6, which is a
significantly different case for tgmath.h compared to GCC 7 and
later because of the lack of _FloatN / _FloatNx support in the
compiler, and at present running the tests with a compiler means
building glibc with that compiler.)
* Some (conditional) uses of built-in functions had been added to
ldbl-128 without appropriate float128_private.h remapping (there was
remapping for the macros controlling whether the built-in functions
are used, just not for the functions themselves).
* s_llrintl.c called __builtin_round not __builtin_llrintl, which is
obviously wrong.
Tested with build-many-glibcs.py for aarch64-linux-gnu, GCC 6 (where
it fixes the glibc build) and GCC 12, and with the glibc testsuite for
x86_64.
The minimum non_temporal_threshold is 0x4040. non_temporal_threshold may
be set to less than the minimum value when the shared cache size isn't
available (e.g., in an emulator) or by the tunable. Add checks for
minimum and maximum of non_temporal_threshold.
This fixes BZ #29953.
If the value changes between sem_wait's read and the gsync_wait call,
the kernel will return KERN_INVALID_ARGUMENT, which we have to interpret
as the value having already changed.
This fixes applications (e.g. libgo) seeing sem_wait erroneously return
KERN_INVALID_ARGUMENT.
The kernel actually verifies it, and a garbage value in the register
causes improper system call failures.
Fixes commit c1c0dea388 ("Linux: Remove epoll_create,
inotify_init from syscalls.list") and commit d1d23b1342
("Lninux: consolidate epoll_create implementation").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This patch increases the value of SIGSTKSZ and MINSIGSTKSZ
for powerpc64 similar to the kernel commit
2f82ec19757f58549467db568c56e7dfff8af283 to allow
further expansion of the signal stack frame size.
This patch updates the kernel version in the tests tst-mman-consts.py,
tst-mount-consts.py and tst-pidfd-consts.py to 6.1. (There are no new
constants covered by these tests in 6.1 that need any other header
changes.)
Tested with build-many-glibcs.py.
vfprintf is entangled with vfwprintf (of course), __printf_fp,
__printf_fphex, __vstrfmon_l_internal, and the strfrom family of
functions. The latter use the internal snprintf functionality,
so vsnprintf is converted as well.
The simples conversion is __printf_fphex, followed by
__vstrfmon_l_internal and __printf_fp, and finally
__vfprintf_internal and __vfwprintf_internal. __vsnprintf_internal
and strfrom* are mostly consuming the new interfaces, so they
are comparatively simple.
__printf_fp is a public symbol, so the FILE *-based interface
had to preserved.
The __printf_fp rewrite does not change the actual binary-to-decimal
conversion algorithm, and digits are still not emitted directly to
the target buffer. However, the staging buffer now uses bytes
instead of wide characters, and one buffer copy is eliminated.
The changes are at least performance-neutral in my testing.
Floating point printing and snprintf improved measurably, so that
this Lua script
for i=1,5000000 do
print(i, i * math.pi)
end
runs about 5% faster for me. To preserve fprintf performance for
a simple "%d" format, this commit has some logic changes under
LABEL (unsigned_number) to avoid additional function calls. There
are certainly some very easy performance improvements here: binary,
octal and hexadecimal formatting can easily avoid the temporary work
buffer (the number of digits can be computed ahead-of-time using one
of the __builtin_clz* built-ins). Decimal formatting can use a
specialized version of _itoa_word for base 10.
The existing (inconsistent) width handling between strfmon and printf
is preserved here. __print_fp_buffer_1 would have to use
__translated_number_width to achieve ISO conformance for printf.
Test expectations in libio/tst-vtables-common.c are adjusted because
the internal staging buffer merges all virtual function calls into
one.
In general, stack buffer usage is greatly reduced, particularly for
unbuffered input streams. __printf_fp can still use a large buffer
in binary128 mode for %g, though.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Their presence causes stub warnings to be created on architectures
which do not implement them.
Fixes commit d1d23b1342 ("Lninux: consolidate
epoll_create implementation") and commit 842128f160
("Linux: consolidate inotify_init implementation").
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
8b8c768e3c ("Force use of -ffreestanding when checking for gnumach
headers") was passing -ffreestanding to CFLAGS only, but headers checks are
performed with the preprocessor, so we rather need to pass it to CPPFLAGS.
Without this ./configure assumes that we are in a fully hosted
environment, which might not be the case. After this patch, we can rely on
the freestanding header files provided by GCC such as stdint.h.
Message-Id: <Y5+0V9osFc/zXMq0@mars>
In the case of INCORRECT usage of `memcmp(a, b, N)` where `a` and `b`
are concurrently modified as `memcmp` runs, there can be a SIGSEGV
in `L(ret_nonzero_vec_end_0)` because the sequential logic
assumes that `(rdx - 32 + rax)` is a positive 32-bit integer.
To be clear, this change does not mean the usage of `memcmp` is
supported. The program behaviour is undefined (UB) in the
presence of data races, and `memcmp` is incorrect when the values
of `a` and/or `b` are modified concurrently (data race). This UB
may manifest itself as a SIGSEGV. That being said, if we can
allow the idiomatic use cases, like those in yottadb with
opportunistic concurrency control (OCC), to execute without a
SIGSEGV, at no cost to regular use cases, then we can aim to
minimize harm to those existing users.
The fix replaces a 32-bit `addl %edx, %eax` with the 64-bit variant
`addq %rdx, %rax`. The 1-extra byte of code size from using the
64-bit instruction doesn't contribute to overall code size as the
next target is aligned and has multiple bytes of `nop` padding
before it. As well all the logic between the add and `ret` still
fits in the same fetch block, so the cost of this change is
basically zero.
The relevant sequential logic can be seen in the following
pseudo-code:
```
/*
* rsi = a
* rdi = b
* rdx = len - 32
*/
/* cmp a[0:15] and b[0:15]. Since length is known to be [17, 32]
in this case, this check is also assumed to cover a[0:(31 - len)]
and b[0:(31 - len)]. */
movups (%rsi), %xmm0
movups (%rdi), %xmm1
PCMPEQ %xmm0, %xmm1
pmovmskb %xmm1, %eax
subl %ecx, %eax
jnz L(END_NEQ)
/* cmp a[len-16:len-1] and b[len-16:len-1]. */
movups 16(%rsi, %rdx), %xmm0
movups 16(%rdi, %rdx), %xmm1
PCMPEQ %xmm0, %xmm1
pmovmskb %xmm1, %eax
subl %ecx, %eax
jnz L(END_NEQ2)
ret
L(END2):
/* Position first mismatch. */
bsfl %eax, %eax
/* The sequential version is able to assume this value is a
positive 32-bit value because the first check included bytes in
range a[0:(31 - len)] and b[0:(31 - len)] so `eax` must be
greater than `31 - len` so the minimum value of `edx` + `eax` is
`(len - 32) + (32 - len) >= 0`. In the concurrent case, however,
`a` or `b` could have been changed so a mismatch in `eax` less or
equal than `(31 - len)` is possible (the new low bound is `(16 -
len)`. This can result in a negative 32-bit signed integer, which
when zero extended to 64-bits is a random large value this out
out of bounds. */
addl %edx, %eax
/* Crash here because 32-bit negative number in `eax` zero
extends to out of bounds 64-bit offset. */
movzbl 16(%rdi, %rax), %ecx
movzbl 16(%rsi, %rax), %eax
```
This fix is quite simple, just make the `addl %edx, %eax` 64 bit (i.e
`addq %rdx, %rax`). This prevents the 32-bit zero extension
and since `eax` is still a low bound of `16 - len` the `rdx + rax`
is bound by `(len - 32) - (16 - len) >= -16`. Since we have a
fixed offset of `16` in the memory access this must be in bounds.
A recent GCC change resulted in localplt test failures on sparc64
because of references to _Qp_fgt. This is analogous to all the other
floating-point symbols allowed in localplt.data, so it seems
appropriate to allow this one as well.
Tested with build-many-glibcs.py for sparc64-linux-gnu (GCC mainline),
where it fixes the test failure.
The generic (sysdeps/unix/sysv/linux/generic/bits/typesizes.h) and
default (bits/typesizes.h) differs in two fields:
bits/typesizes.h Linux generic
__NLINK_T_TYPE __UWORD_TYPE __U32_TYPE
__BLKSIZE_T_TYPE __SLONGWORD_TYPE __S32_TYPE
Sinceit leads to different C++ mangling names, the default typesize.h
is copied for the requires archtiectures and the generic is make the
default Linux one.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
It is currently used for csky, arc, nios2, and or1k. Newer 64 bit
architecture, like riscv32 and loongarch, reimplement it to override
F_GETLK64/F_SETLK64/F_SETLKW64.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The includes chain is added on each architecture sysdep.h and
the __NR__llseek hack is moved to lseek.c and lseek64.c.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This is similar to other LFS consolidation, where the non-LFS is only
built if __OFF_T_MATCHES_OFF64_T is not defined and the LFS version
is aliased to non-LFS name if __OFF_T_MATCHES_OFF64_T is defined.
For non-LFS variant, use sendfile syscall if defined, otherwise use
sendfile64 plus the offset overflow check (as generic implementation).
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use unlink syscall if defined, otherwise use unlinkat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use symlink syscall if defined, otherwise use symlinkat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use rmdir syscall if defined, otherwise use unlinkat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use readlink syscall if defined, otherwise readlinkat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use mkdir syscall if defined, otherwise use mkdirat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use link syscall if defined, otherwise use linkat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use lchown syscall if defined, otherwise use fchownat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use inotify_init syscall if defined, otherwise use inotify_init1.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use epoll_create syscall if defined, otherwise use epoll_create1.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use dup2 syscall if defined, otherwise use dup3.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use chown syscall if defined, otherwise use fchownat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use chmod syscall if defined, otherwise use fchmodat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use the generic implementation as the default, since the syscall
is supported by all architectures.
Also cleanup some headers and remove the INTERNAL_SYSCALL_ERROR_P
usage (the INTERNAL_SYSCALL_CALL macro already returns an negative
value if an error occurs).
The linux syscall ABI returns long, so the generic syscall code for
linux should use long for the return value.
This fixes the truncation of the return value of the syscall function
when that does not fit into an int.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The assembler is not issued directly, but rather always through CC
wrapper. The binutils version check if done with LD instead.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Previously, getrandom would, each time it's called, traverse the file
system to find /dev/urandom, fetch some random data from it, then throw
away that port. This is quite slow, while calls to getrandom are
genrally expected to be fast.
Additionally, this means that getrandom can not work when /dev/urandom
is unavailable, such as inside a chroot that lacks one. User programs
expect calls to getrandom to work inside a chroot if they first call
getrandom outside of the chroot.
In particular, this is known to break the OpenSSH server, and in that
case the issue is exacerbated by the API of arc4random, which prevents
it from properly reporting errors, forcing glibc to abort on failure.
This causes sshd to just die once it tries to generate a random number.
Caching the random server port, in a manner similar to how socket
server ports are cached, both improves the performance and works around
the chroot issue.
Tested on i686-gnu with the following program:
pthread_barrier_t barrier;
void *worker(void*) {
pthread_barrier_wait(&barrier);
uint32_t sum = 0;
for (int i = 0; i < 10000; i++) {
sum += arc4random();
}
return (void *)(uintptr_t) sum;
}
int main() {
pthread_t threads[THREAD_COUNT];
pthread_barrier_init(&barrier, NULL, THREAD_COUNT);
for (int i = 0; i < THREAD_COUNT; i++) {
pthread_create(&threads[i], NULL, worker, NULL);
}
for (int i = 0; i < THREAD_COUNT; i++) {
void *retval;
pthread_join(threads[i], &retval);
printf("Thread %i: %lu\n", i, (unsigned long)(uintptr_t) retval);
}
In my totally unscientific benchmark, with this patch, this completes
in about 7 seconds, whereas previously it took about 50 seconds. This
program was also used to test that getrandom () doesn't explode if the
random server dies, but instead reopens the /dev/urandom anew. I have
also verified that with this patch, OpenSSH can once again accept
connections properly.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20221202135558.23781-1-bugaevc@gmail.com>
This patch cleans up the power4 strncmp optimization for powerpc64 which
is unlikely to be used anywhere.
Tested on ppc64le with and without --disable-multi-arch flag.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
On x32, the size_t parameter may be passed in the lower 32 bits of a
64-bit register with the non-zero upper 32 bits. The string/memory
functions written in assembly can only use the lower 32 bits of a
64-bit register as length or must clear the upper 32 bits before using
the full 64-bit register for length.
This pach fixes strncpy for x32. Tested on x86-64 and x32. On x86-64,
libc.so is the same with and without the fix.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
On x32, the size_t parameter may be passed in the lower 32 bits of a
64-bit register with the non-zero upper 32 bits. The string/memory
functions written in assembly can only use the lower 32 bits of a
64-bit register as length or must clear the upper 32 bits before using
the full 64-bit register for length.
This pach fixes strncat for x32. Tested on x86-64 and x32. On x86-64,
libc.so is the same with and without the fix.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Add inline assembler for the scalbn functions. Passes GLIBC regression.
GCC 13, LoongArch support ___builtin_scalbn{,f} with -fno-math-errno,
but only "libm" can use -fno-math-errno in GLIBC, and scalbn is in libc
instead of libm because __printf_fp calls it.
GCC 13 compiles these built-ins instead of generic
implementation for function logb.
Link: https://gcc.gnu.org/r13-3922
Co-Authored-By: Xi Ruoyao <xry111@xry111.site>
This patch is using the corresponding GCC builtin for logbf, logb,
logbl and logbf128 if the USE_FUNCTION_BUILTIN macros are defined to one
in math-use-builtins-function.h.
Co-Authored-By: Xi Ruoyao <xry111@xry111.site>
GCC 13 compiles these built-ins instead of generic
implementation for function llrint.
Link: https://gcc.gnu.org/r13-3920
Co-Authored-By: Xi Ruoyao <xry111@xry111.site>
This patch is using the corresponding GCC builtin for llrintf, llrint,
llrintl and llrintf128 if the USE_FUNCTION_BUILTIN macros are defined to one
in math-use-builtins-function.h.
Co-Authored-By: Xi Ruoyao <xry111@xry111.site>
GCC 13 compiles these built-ins instead of generic
implementation for function lrint.
Link: https://gcc.gnu.org/r13-3920
Co-Authored-By: Xi Ruoyao <xry111@xry111.site>
This patch is using the corresponding GCC builtin for lrintf, lrint,
lrintl and lrintf128 if the USE_FUNCTION_BUILTIN macros are defined to one
in math-use-builtins-function.h.
Co-Authored-By: Xi Ruoyao <xry111@xry111.site>
lld does not implement all the linker optimization to avoid the GOT
relocation as done by binutils (bfd/elf32-i386.c:elf_i386_convert_load_reloc).
The current 'movl main@GOT(%ebx), %eax' will then create a GOT
relocation when building with lld, which make static-pie status to
not being able to start the provided main function.
The change uses a __wrap_main local symbol, which in turn calls main
(similar as used by aarch64 and s390x).
Checked on i686-linux-gnu with binutils and lld.
Reviewed-by: Fangrui Song <maskray@google.com>
This patch fixes two problems with audit:
1. The DL_OFFSET_RV_VPCS offset was mixed up with DL_OFFSET_RG_VPCS,
resulting in x2 register value nulling in RG structure.
2. We need to preserve the x8 register before function call, but
don't have to save it's new value and restore it before return.
Anyway the final restore was using OFFSET_RV instead of OFFSET_RG value
which is wrong (althoug doesn't affect anything).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Currently glibc uses in_time_t_range to detects time_t overflow,
and if it occurs fallbacks to 64 bit syscall version.
The function name is confusing because internally time_t might be
either 32 bits or 64 bits (depending on __TIMESIZE).
This patch refactors the in_time_t_range by replacing it with
in_int32_t_range for the case to check if the 64 bit time_t syscall
should be used.
The in_time_t range is used to detect overflow of the
syscall return value.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
