This patch enables the option to influence hwcaps used by PowerPC.
The environment variable, GLIBC_TUNABLES=glibc.cpu.hwcaps=-xxx,yyy,-zzz....,
can be used to enable CPU/ARCH feature yyy, disable CPU/ARCH feature xxx
and zzz, where the feature name is case-sensitive and has to match the ones
mentioned in the file{sysdeps/powerpc/dl-procinfo.c}.
Note that the hwcap tunables only used in the IFUNC selection.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Bump autoconf requirement to 2.71 to allow regenerating configure on
more recent distributions. autoconf 2.71 has been in Fedora since F36
and is the current version in Debian stable (bookworm). It appears to
be current in Gentoo as well.
All sysdeps configure and preconfigure scripts have also been
regenerated; all changes are trivial transformations that do not affect
functionality.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
All fixes are in comments, so the binaries should be identical
before/after this commit, but I can't verify this.
Reviewed-by: Rajalakshmi Srinivasaraghavan <rajis@linux.ibm.com>
The default, power4, and power7 implementation just adds word aligned
access when inputs have the same aligment. The unaligned case
is still done by byte operations.
This is already covered by the generic implementation, which also add
the unaligned input optimization.
Checked on powerpc-linux-gnu built without multi-arch for powerpc,
power4, and power7.
Reviewed-by: Rajalakshmi Srinivasaraghavan <rajis@linux.ibm.com>
Although static linker can optimize it to local call, it follows the
internal scheme to provide hidden proto and definitions.
Reviewed-by: Carlos Eduardo Seo <carlos.seo@linaro.org>
Although static linker can optimize it to local call, it follows the
internal scheme to provide hidden proto and definitions.
Reviewed-by: Carlos Eduardo Seo <carlos.seo@linaro.org>
It also cleanups the multiple inclusion by leaving the ifunc
implementation to undef the weak_alias and libc_hidden_def.
Co-authored-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
New algorithm read the first aligned address and mask off the
unwanted bytes (this strategy is similar to arch-specific
implementations used on powerpc, sparc, and sh).
The loop now read word-aligned address and check using the has_eq
macro.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc-linux-gnu,
and powerpc64-linux-gnu by removing the arch-specific assembly
implementation and disabling multi-arch (it covers both LE and BE
for 64 and 32 bits).
Co-authored-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
New algorithm read the first aligned address and mask off the unwanted
bytes (this strategy is similar to arch-specific implementations used
on powerpc, sparc, and sh).
The loop now read word-aligned address and check using the has_zero_eq
function.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64-linux-gnu,
and powerpc-linux-gnu by removing the arch-specific assembly
implementation and disabling multi-arch (it covers both LE and BE
for 64 and 32 bits).
Co-authored-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
It moves OP_T_THRES out of memcopy.h to its own header and adjust
each architecture that redefines it.
Checked with a build and check with run-built-tests=no for all major
Linux ABIs.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
GCC 13 has added more _FloatN and _FloatNx versions of existing
<math.h> and <complex.h> built-in functions, for use in libstdc++-v3.
This breaks the glibc build because of how those functions are defined
as aliases to functions with the same ABI but different types. Add
appropriate -fno-builtin-* options for compiling relevant files, as
already done for the case of long double functions aliasing double
ones and based on the list of files used there.
I fixed some mistakes in that list of double files that I noticed
while implementing this fix, but there may well be more such
(harmless) cases, in this list or the new one (files that don't
actually exist or don't define the named functions as aliases so don't
need the options). I did try to exclude cases where glibc doesn't
define certain functions for _FloatN or _FloatNx types at all from the
new uses of -fno-builtin-* options. As with the options for double
files (see the commit message for commit
49348beafe, "Fix build with GCC 10 when
long double = double."), it's deliberate that the options are used
even if GCC currently doesn't have a built-in version of a given
functions, so providing some level of future-proofing against more
such built-in functions being added in future.
Tested with build-many-glibcs.py for aarch64-linux-gnu
powerpc-linux-gnu powerpc64le-linux-gnu x86_64-linux-gnu (compilers
and glibcs builds) with GCC mainline.
This allows us to define a generic no-op version of PTR_MANGLE and
PTR_DEMANGLE. In the future, we can use PTR_MANGLE and PTR_DEMANGLE
unconditionally in C sources, avoiding an unintended loss of hardening
due to missing include files or unlucky header inclusion ordering.
In i386 and x86_64, we can avoid a <tls.h> dependency in the C
code by using the computed constant from <tcb-offsets.h>. <sysdep.h>
no longer includes these definitions, so there is no cyclic dependency
anymore when computing the <tcb-offsets.h> constants.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Add a proper bounds check to __libc_ifunc_impl_list. This makes MAX_IFUNC
redundant and fixes several targets that will write outside the array.
To avoid unnecessary large diffs, pass the maximum in the argument 'i' to
IFUNC_IMPL_ADD - 'max' can be used in new ifunc definitions and existing
ones can be updated if desired.
Passes buildmanyglibc.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Both float, double, and _Float128 are assumed to be supported
(float and double already only uses builtins). Only long double
is parametrized due GCC bug 29253 which prevents its usage on
powerpc.
It allows to remove i686, ia64, x86_64, powerpc, and sparc arch
specific implementation.
On ia64 it also fixes the sNAN handling:
math/test-float64x-fabs
math/test-ldouble-fabs
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc-linux-gnu,
powerpc64-linux-gnu, sparc64-linux-gnu, and ia64-linux-gnu.
PI_STATIC_AND_HIDDEN indicates whether accesses to internal linkage
variables and hidden visibility variables in a shared object (ld.so)
need dynamic relocations (usually R_*_RELATIVE). PI (position
independent) in the macro name is a misnomer: a code sequence using GOT
is typically position-independent as well, but using dynamic relocations
does not meet the requirement.
Not defining PI_STATIC_AND_HIDDEN is legacy and we expect that all new
ports will define PI_STATIC_AND_HIDDEN. Current ports defining
PI_STATIC_AND_HIDDEN are more than the opposite. Change the configure
default.
No functional change.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Prelinked binaries and libraries still work, the dynamic tags
DT_GNU_PRELINKED, DT_GNU_LIBLIST, DT_GNU_CONFLICT just ignored
(meaning the process is reallocated as default).
The loader environment variable TRACE_PRELINKING is also removed,
since it used solely on prelink.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Trapping SIGSEGV within the process is error-prone, adds security
issues, and modern analysis design tends to happen out of the
process (either by attaching a debugger or by post-mortem analysis).
The libSegfault also has some design problems, it uses non
async-signal-safe function (backtrace) on signal handler.
There are multiple alternatives if users do want to use similar
functionality, such as sigsegv gnulib module or libsegfault.
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
The generic implementation is shows only slight worse performance:
POWER10 reciprocal-throughput latency
master 8.28478 13.7253
new hypot 7.21945 13.1933
POWER9 reciprocal-throughput latency
master 13.4024 14.0967
new hypot 14.8479 15.8061
POWER8 reciprocal-throughput latency
master 15.5767 16.8885
new hypot 16.5371 18.4057
One way to improve might to make gcc generate xsmaxdp/xsmindp for
fmax/fmin (it onl does for -ffast-math, clang does for default
options).
Checked on powerpc64-linux-gnu (power8) and powerpc64le-linux-gnu
(power9).
No bug.
This commit adds support for __memcmpeq() as a new ABI for all
targets. In this commit __memcmpeq() is implemented only as an alias
to the corresponding targets memcmp() implementation. __memcmpeq() is
added as a new symbol starting with GLIBC_2.35 and defined in string.h
with comments explaining its behavior. Basic tests that it is callable
and works where added in string/tester.c
As discussed in the proposal "Add new ABI '__memcmpeq()' to libc"
__memcmpeq() is essentially a reserved namespace for bcmp(). The means
is shares the same specifications as memcmp() except the return value
for non-equal byte sequences is any non-zero value. This is less
strict than memcmp()'s return value specification and can be better
optimized when a boolean return is all that is needed.
__memcmpeq() is meant to only be called by compilers if they can prove
that the return value of a memcmp() call is only used for its boolean
value.
All tests in string/tester.c passed. As well build succeeds on
x86_64-linux-gnu target.
The powerpc optimization to provide a fast stacktrace requires some
ad-hoc code to handle Linux signal frames and the change is fragile
once the kernel decides to slight change its execution sequence [1].
The generic implementation work as-is and it should be future proof
since the kernel provides the expected CFI directives in vDSO shared
page.
Checked on powerpc-linux-gnu, powerpc64le-linux-gnu, and
powerpc64-linux-gnu.
[1] https://sourceware.org/pipermail/libc-alpha/2021-January/122027.html
The 4af6982e4c fix does not fully handle RTLD_BOOTSTRAP usage on
rtld.c due two issues:
1. RTLD_BOOTSTRAP is also used on dl-machine.h on various
architectures and it changes the semantics of various machine
relocation functions.
2. The elf_get_dynamic_info() change was done sideways, previously
to 490e6c62aa get-dynamic-info.h was included by the first
dynamic-link.h include *without* RTLD_BOOTSTRAP being defined.
It means that the code within elf_get_dynamic_info() that uses
RTLD_BOOTSTRAP is in fact unused.
To fix 1. this patch now includes dynamic-link.h only once with
RTLD_BOOTSTRAP defined. The ELF_DYNAMIC_RELOCATE call will now have
the relocation fnctions with the expected semantics for the loader.
And to fix 2. part of 4af6982e4c is reverted (the check argument
elf_get_dynamic_info() is not required) and the RTLD_BOOTSTRAP
pieces are removed.
To reorganize the includes the static TLS definition is moved to
its own header to avoid a circular dependency (it is defined on
dynamic-link.h and dl-machine.h requires it at same time other
dynamic-link.h definition requires dl-machine.h defitions).
Also ELF_MACHINE_NO_REL, ELF_MACHINE_NO_RELA, and ELF_MACHINE_PLT_REL
are moved to its own header. Only ancient ABIs need special values
(arm, i386, and mips), so a generic one is used as default.
The powerpc Elf64_FuncDesc is also moved to its own header, since
csu code required its definition (which would require either include
elf/ folder or add a full path with elf/).
Checked on x86_64, i686, aarch64, armhf, powerpc64, powerpc32,
and powerpc64le.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
dynamic-link.h is included more than once in some elf/ files (rtld.c,
dl-conflict.c, dl-reloc.c, dl-reloc-static-pie.c) and uses GCC nested
functions. This harms readability and the nested functions usage
is the biggest obstacle prevents Clang build (Clang doesn't support GCC
nested functions).
The key idea for unnesting is to add extra parameters (struct link_map
*and struct r_scope_elm *[]) to RESOLVE_MAP,
ELF_MACHINE_BEFORE_RTLD_RELOC, ELF_DYNAMIC_RELOCATE, elf_machine_rel[a],
elf_machine_lazy_rel, and elf_machine_runtime_setup. (This is inspired
by Stan Shebs' ppc64/x86-64 implementation in the
google/grte/v5-2.27/master which uses mixed extra parameters and static
variables.)
Future simplification:
* If mips elf_machine_runtime_setup no longer needs RESOLVE_GOTSYM,
elf_machine_runtime_setup can drop the `scope` parameter.
* If TLSDESC no longer need to be in elf_machine_lazy_rel,
elf_machine_lazy_rel can drop the `scope` parameter.
Tested on aarch64, i386, x86-64, powerpc64le, powerpc64, powerpc32,
sparc64, sparcv9, s390x, s390, hppa, ia64, armhf, alpha, and mips64.
In addition, tested build-many-glibcs.py with {arc,csky,microblaze,nios2}-linux-gnu
and riscv64-linux-gnu-rv64imafdc-lp64d.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date. Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.
Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions. These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.
The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively. These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:
https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dchttps://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
They provide TLS_GD/TLS_LD/TLS_IE/TLS_IE macros for TLS testing. Now
that we have migrated to __thread and tls_model attributes, these macros
are unused and the tls-macros.h files can retire.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
This will be used to consolidate the libgcc_s access for backtrace
and pthread_cancel.
Unlike the existing backtrace implementations, it provides some
hardening based on pointer mangling.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It turns out the startup code in csu/elf-init.c has a perfect pair of
ROP gadgets (see Marco-Gisbert and Ripoll-Ripoll, "return-to-csu: A
New Method to Bypass 64-bit Linux ASLR"). These functions are not
needed in dynamically-linked binaries because DT_INIT/DT_INIT_ARRAY
are already processed by the dynamic linker. However, the dynamic
linker skipped the main program for some reason. For maximum
backwards compatibility, this is not changed, and instead, the main
map is consulted from __libc_start_main if the init function argument
is a NULL pointer.
For statically linked binaries, the old approach based on linker
symbols is still used because there is nothing else available.
A new symbol version __libc_start_main@@GLIBC_2.34 is introduced because
new binaries running on an old libc would not run their ELF
constructors, leading to difficult-to-debug issues.
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
Linux kernel v5.9 added support for system calls using the scv
instruction for POWER9 and later. The new codepath provides better
performance (see below) if compared to using sc. For the
foreseeable future, both sc and scv mechanisms will co-exist, so this
patch enables glibc to do a runtime check and use scv when it is
available.
Before issuing the system call to the kernel, we check hwcap2 in the TCB
for PPC_FEATURE2_SCV to see if scv is supported by the kernel. If not,
we fallback to sc and keep the old behavior.
The kernel implements a different error return convention for scv, so
when returning from a system call we need to handle the return value
differently depending on the instruction we used to enter the kernel.
For syscalls implemented in ASM, entry and exit are implemented by
different macros (PSEUDO and PSEUDO_RET, resp.), which may be used in
sequence (e.g. for templated syscalls) or with other instructions in
between (e.g. clone). To avoid accessing the TCB a second time on
PSEUDO_RET to check which instruction we used, the value read from
hwcap2 is cached on a non-volatile register.
This is not needed when using INTERNAL_SYSCALL macro, since entry and
exit are bundled into the same inline asm directive.
The dynamic loader may issue syscalls before the TCB has been setup
so it always uses sc with no extra checks. For the static case, there
is no compile-time way to determine if we are inside startup code,
so we also check the value of the thread pointer before effectively
accessing the TCB. For such situations in which the availability of
scv cannot be determined, sc is always used.
Support for scv in syscalls implemented in their own ASM file (clone and
vfork) will be added later. For now simply use sc as before.
Average performance over 1M calls for each syscall "type":
- stat: C wrapper calling INTERNAL_SYSCALL
- getpid: templated ASM syscall
- syscall: call to gettid using syscall function
Standard:
stat : 1.573445 us / ~3619 cycles
getpid : 0.164986 us / ~379 cycles
syscall : 0.162743 us / ~374 cycles
With scv:
stat : 1.537049 us / ~3535 cycles <~ -84 cycles / -2.32%
getpid : 0.109923 us / ~253 cycles <~ -126 cycles / -33.25%
syscall : 0.116410 us / ~268 cycles <~ -106 cycles / -28.34%
Tested on powerpc, powerpc64, powerpc64le (with and without scv)
Tested-by: Lucas A. M. Magalhães <lamm@linux.ibm.com>
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
dl_powerpc_cpu_features also needs to be protected by __GLRO to check
for the _rtld_global_ro realocation before accessing it.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
__GLRO loaded the word after the requested variable on big-endian
PowerPC, where LOWORD is 4. This can cause the memset implement
go wrong because the masking with the cache line size produces
wrong results, particularly if the loaded value happens to be 1.
The __GLRO macro is not used in any place where loading the lower
32-bit word of a 64-bit value is desired, so the +4 offset is always
wrong.
Fixes commit 18363b4f01
("powerpc: Move cache line size to rtld_global_ro") and bug 26332.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
1. Add the directories to hold POWER10 files.
2. Add support to select POWER10 libraries based on AT_PLATFORM.
3. Let submachine=power10 be set automatically.
When unwinding through a signal frame the backtrace function on PowerPC
didn't check array bounds when storing the frame address. Fixes commit
d400dcac5e ("PowerPC: fix backtrace to handle signal trampolines").
GCC 10.0 enabled -fno-common by default and this started to point that
__cache_line_size had been implemented in 2 different places: loader and
libc.
In order to avoid this duplication, the libc variable has been removed
and the loader variable is moved to rtld_global_ro.
File sysdeps/unix/sysv/linux/powerpc/dl-auxv.h has been added in order
to reuse code for both static and dynamic linking scenarios.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This patch moves the vDSO setup from libc to loader code, just after
the vDSO link_map setup. For static case the initialization
is moved to _dl_non_dynamic_init instead.
Instead of using the mangled pointer, the vDSO data is set as
attribute_relro (on _rtld_global_ro for shared or _dl_vdso_* for
static). It is read-only even with partial relro.
It fixes BZ#24967 now that the vDSO pointer is setup earlier than
malloc interposition is called.
Also, vDSO calls should not be a problem for static dlopen as
indicated by BZ#20802. The vDSO pointer would be zero-initialized
and the syscall will be issued instead.
Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu,
arm-linux-gnueabihf, powerpc64le-linux-gnu, powerpc64-linux-gnu,
powerpc-linux-gnu, s390x-linux-gnu, sparc64-linux-gnu, and
sparcv9-linux-gnu. I also run some tests on mips.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
This patch adds a new macro, libm_alias_finite, to define all _finite
symbol. It sets all _finite symbol as compat symbol based on its first
version (obtained from the definition at built generated first-versions.h).
The <fn>f128_finite symbols were introduced in GLIBC 2.26 and so need
special treatment in code that is shared between long double and float128.
It is done by adding a list, similar to internal symbol redifinition,
on sysdeps/ieee754/float128/float128_private.h.
Alpha also needs some tricky changes to ensure we still emit 2 compat
symbols for sqrt(f).
Passes buildmanyglibc.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
This patch adds the missing bits for powerpc and fixes both
tst-ifunc-fault-lazy and tst-ifunc-fault-bindnow failures on
powerpc-linux-gnu.
Checked on powerpc-linux-gnu and powerpc-linux-gnu-power4.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Linux vDSO initialization code the internal function pointers require a
lot of duplicated boilerplate over different architectures. This patch
aims to simplify not only the code but the required definition to enable
a vDSO symbol.
The changes are:
1. Consolidate all init-first.c on only one implementation and enable
the symbol based on HAVE_*_VSYSCALL existence.
2. Set the HAVE_*_VSYSCALL to the architecture expected names string.
3. Add a new internal implementation, get_vdso_mangle_symbol, which
returns a mangled function pointer.
Currently the clock_gettime, clock_getres, gettimeofday, getcpu, and time
are handled in an arch-independent way, powerpc still uses some
arch-specific vDSO symbol handled in a specific init-first implementation.
Checked on aarch64-linux-gnu, arm-linux-gnueabihf, i386-linux-gnu,
mips64-linux-gnu, powerpc64le-linux-gnu, s390x-linux-gnu,
sparc64-linux-gnu, and x86_64-linux-gnu.
* sysdeps/powerpc/powerpc32/backtrace.c (is_sigtramp_address,
is_sigtramp_address_rt): Use HAVE_SIGTRAMP_{RT}32 instead of SHARED.
* sysdeps/powerpc/powerpc64/backtrace.c (is_sigtramp_address):
Likewise.
* sysdeps/unix/sysv/linux/aarch64/init-first.c: Remove file.
* sysdeps/unix/sysv/linux/aarch64/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/arm/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/arm/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/mips/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/mips/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/i386/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/riscv/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/riscv/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/s390/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/s390/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/sparc/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/x86/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/aarch64/sysdep.h
(HAVE_CLOCK_GETRES_VSYSCALL, HAVE_CLOCK_GETTIME_VSYSCALL,
HAVE_GETTIMEOFDAY_VSYSCALL): Define value based on kernel exported
name.
* sysdeps/unix/sysv/linux/arm/sysdep.h (HAVE_CLOCK_GETTIME_VSYSCALL,
HAVE_GETTIMEOFDAY_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/i386/sysdep.h (HAVE_CLOCK_GETTIME_VSYSCALL,
HAVE_GETTIMEOFDAY_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/mips/sysdep.h (HAVE_CLOCK_GETTIME_VSYSCALL,
HAVE_GETTIMEOFDAY_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/powerpc/sysdep.h
(HAVE_CLOCK_GETRES_VSYSCALL, HAVE_CLOCK_GETTIME_VSYSCALL,
HAVE_GETCPU_VSYSCALL, HAVE_TIME_VSYSCALL, HAVE_GET_TBFREQ,
HAVE_SIGTRAMP_RT64, HAVE_SIGTRAMP_32, HAVE_SIGTRAMP_RT32i,
HAVE_GETTIMEOFDAY_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/riscv/sysdep.h (HAVE_CLOCK_GETRES_VSYSCALL,
HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL,
HAVE_GETCPU_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/s390/sysdep.h (HAVE_CLOCK_GETRES_VSYSCALL,
HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL,
HAVE_GETCPU_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/sparc/sysdep.h (HAVE_CLOCK_GETTIME_VSYSCALL,
HAVE_GETTIMEOFDAY_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/x86_64/sysdep.h
(HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL,
HAVE_GETCPU_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/dl-vdso.h (VDSO_NAME, VDSO_HASH): Define to
invalid names if architecture does not define them.
(get_vdso_mangle_symbol): New symbol.
* sysdeps/unix/sysv/linux/init-first.c: New file.
* sysdeps/unix/sysv/linux/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/init-first.c (gettimeofday,
clock_gettime, clock_getres, getcpu, time): Remove declaration.
(__libc_vdso_platform_setup_arch): Likewise and use
get_vdso_mangle_symbol to setup vDSO symbols.
(sigtramp_rt64, sigtramp32, sigtramp_rt32, get_tbfreq): Add
attribute_hidden.
* sysdeps/unix/sysv/linux/powerpc/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/sysdep-vdso.h (VDSO_SYMBOL): Remove
definition.
