Check if the socket support 64-bit network packages timestamps
(SO_TIMESTAMP and SO_TIMESTAMPNS). This will be used on recvmsg
and recvmmsg tests to check if the timestamp should be generated.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
There was no direct or indirect make dependency on testobj3.so so the
test could fail with
/B/elf/loadfail: failed to load shared object: testobj3.so: cannot open
shared object file: No such file or directory
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The glibc 2.34 release really should have added a GLIBC_2.34
symbol to the dynamic loader. With it, we could move functions such
as dlopen or pthread_key_create that work on process-global state
into the dynamic loader (once we have fixed a longstanding issue
with static linking). Without the GLIBC_2.34 symbol, yet another
new symbol version would be needed because old glibc will fail to
load binaries due to the missing symbol version in ld.so that newly
linked programs will require.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
This avoid the cross-compiling breakage when the test should not run
($(run-built-tests) equal to no).
Checked on x86_64-linux-gnu and i686-linux-gnu as well with a cross
compile to aarch64-linux-gnu and powerpc64-linux-gnu.
Currently there is no proper way to set the controlling terminal through
posix_spawn in race free manner [1]. This forces shell implementations
to keep using fork+exec when launching background process groups,
even when using posix_spawn yields better performance.
This patch adds a new GNU extension so the creating process can
configure the created process terminal group. This is done with a new
flag, POSIX_SPAWN_TCSETPGROUP, along with two new attribute functions:
posix_spawnattr_tcsetpgrp_np, and posix_spawnattr_tcgetpgrp_np.
The function sets a new attribute, spawn-tcgroupfd, that references to
the controlling terminal.
The controlling terminal is set after the spawn-pgroup attribute, and
uses the spawn-tcgroupfd along with current creating process group
(so it is composable with POSIX_SPAWN_SETPGROUP).
To create a process and set the controlling terminal, one can use the
following sequence:
posix_spawnattr_t attr;
posix_spawnattr_init (&attr);
posix_spawnattr_setflags (&attr, POSIX_SPAWN_TCSETPGROUP);
posix_spawnattr_tcsetpgrp_np (&attr, tcfd);
If the idea is also to create a new process groups:
posix_spawnattr_t attr;
posix_spawnattr_init (&attr);
posix_spawnattr_setflags (&attr, POSIX_SPAWN_TCSETPGROUP
| POSIX_SPAWN_SETPGROUP);
posix_spawnattr_tcsetpgrp_np (&attr, tcfd);
posix_spawnattr_setpgroup (&attr, 0);
The controlling terminal file descriptor is ignored if the new flag is
not set.
This interface is slight different than the one provided by QNX [2],
which only provides the POSIX_SPAWN_TCSETPGROUP flag. The QNX
documentation does not specify how the controlling terminal is obtained
nor how it iteracts with POSIX_SPAWN_SETPGROUP. Since a glibc
implementation is library based, it is more straightforward and avoid
requires additional file descriptor operations to request the caller
to setup the controlling terminal file descriptor (and it also allows
a bit less error handling by posix_spawn).
Checked on x86_64-linux-gnu and i686-linux-gnu.
[1] https://github.com/ksh93/ksh/issues/79
[2] https://www.qnx.com/developers/docs/7.0.0/index.html#com.qnx.doc.neutrino.lib_ref/topic/p/posix_spawn.html
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
When fnmatch processes a bracket expression, and eventually finds it to be
unterminated, it should rescan it, treating the starting bracket as a
normal character. That didn't happen when a matching character was found
while scanning the bracket expression.
Set errno and failure for paths that are too long only if no other error
occurred earlier.
Related: BZ #28770
Reviewed-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Build tst-p_alignmod3.so with 256 byte page size and verify that it is
rejected with a proper error message.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Add tst-p_alignmod2-edit to edit the copy of tst-p_alignmod-base.so to
set p_align of the first PT_LOAD segment to 1 and verify that the shared
library can be loaded normally.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Add tst-p_alignmod1-edit to edit the copy of tst-p_alignmod-base.so to
reduce p_align of the first PT_LOAD segment by half and verify that the
shared library is mapped with the maximum p_align of all PT_LOAD segments.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
DT_RUNPATH is only used to find the immediate dependencies of the
executable or shared object containing the DT_RUNPATH entry:
1. Define link-test-modules-rpath-link if $(build-hardcoded-path-in-tests)
is yes.
2. Use $(link-test-modules-rpath-link) in build-module-helper so that
test modules can dlopen modules with DT_RUNPATH.
3. Add a test to show why link-test-modules-rpath-link is needed.
This partially fixes BZ #28455.
No valid path returned by getcwd would fit into 1 byte, so reject the
size early and return NULL with errno set to ERANGE. This change is
prompted by CVE-2021-3999, which describes a single byte buffer
underflow and overflow when all of the following conditions are met:
- The buffer size (i.e. the second argument of getcwd) is 1 byte
- The current working directory is too long
- '/' is also mounted on the current working directory
Sequence of events:
- In sysdeps/unix/sysv/linux/getcwd.c, the syscall returns ENAMETOOLONG
because the linux kernel checks for name length before it checks
buffer size
- The code falls back to the generic getcwd in sysdeps/posix
- In the generic func, the buf[0] is set to '\0' on line 250
- this while loop on line 262 is bypassed:
while (!(thisdev == rootdev && thisino == rootino))
since the rootfs (/) is bind mounted onto the directory and the flow
goes on to line 449, where it puts a '/' in the byte before the
buffer.
- Finally on line 458, it moves 2 bytes (the underflowed byte and the
'\0') to the buf[0] and buf[1], resulting in a 1 byte buffer overflow.
- buf is returned on line 469 and errno is not set.
This resolves BZ #28769.
Reviewed-by: Andreas Schwab <schwab@linux-m68k.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Qualys Security Advisory <qsa@qualys.com>
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Check if whether valgrind is available in the test environment.
If not, skip the test. Run smoke tests with valgrind to verify dynamic loader.
First, check if algrind works with the system ld.so in the test
environment. Then run the actual test inside the test environment,
using the just build ld.so and new libraries.
Co-authored-by: Mark Wielaard <mark@klomp.org>
If any RPC fails, the reply port will already be deallocated.
__pthread_thread_terminate thus has to defer taking its name until the very last
__thread_terminate_release which doesn't reply a message. But then we
have to read from the pthread structure.
This introduces __pthread_dealloc_finish() which does the recording of
the thread termination, so the slot can be reused really only just before
the __thread_terminate_release call. Only the real thread can set it, so
let's decouple this from the pthread_state by just removing the
PTHREAD_TERMINATED state and add a terminated field.
Linker may set p_align of a PT_LOAD segment larger than p_align of the
first PT_LOAD segment to satisfy a section alignment:
Elf file type is DYN (Shared object file)
Entry point 0x0
There are 10 program headers, starting at offset 64
Program Headers:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
LOAD 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000834 0x0000000000000834 R E 0x1000
LOAD 0x0000000000000e00 0x0000000000001e00 0x0000000000001e00
0x0000000000000230 0x0000000000000230 RW 0x1000
LOAD 0x0000000000400000 0x0000000000400000 0x0000000000400000
0x0000000000000004 0x0000000000000008 RW 0x400000
...
Section to Segment mapping:
Segment Sections...
00 .note.gnu.property .note.gnu.build-id .gnu.hash .dynsym .dynstr .gnu.version .gnu.version_r .rela.dyn .rela.plt .init .plt .plt.got .text .fini .rodata .eh_frame_hdr .eh_frame
01 .init_array .fini_array .data.rel.ro .dynamic .got .got.plt
02 .data .bss
We should align the first PT_LOAD segment to the maximum p_align of all
PT_LOAD segments, similar to the kernel commit:
commit ce81bb256a224259ab686742a6284930cbe4f1fa
Author: Chris Kennelly <ckennelly@google.com>
Date: Thu Oct 15 20:12:32 2020 -0700
fs/binfmt_elf: use PT_LOAD p_align values for suitable start address
This fixes BZ #28676.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
realpath returns an allocated string when the result exceeds PATH_MAX,
which is unexpected when its second argument is not NULL. This results
in the second argument (resolved) being uninitialized and also results
in a memory leak since the caller expects resolved to be the same as the
returned value.
Return NULL and set errno to ENAMETOOLONG if the result exceeds
PATH_MAX. This fixes [BZ #28770], which is CVE-2021-3998.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Add new helpers support_create_and_chdir_toolong_temp_directory and
support_chdir_toolong_temp_directory to create and descend into
directory trees longer than PATH_MAX.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The commit:
"Add LLL_MUTEX_READ_LOCK [BZ #28537]"
SHA1: d672a98a1a
introduced LLL_MUTEX_READ_LOCK, to skip CAS in spinlock loop
if atomic load fails. But, "continue" inside of do-while loop
does not skip the evaluation of escape expression, thus CAS
is not skipped.
Replace do-while with while and skip LLL_MUTEX_TRYLOCK if
LLL_MUTEX_READ_LOCK fails.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
And compile it with the early CFLAGS. _dl_setup_hash is called
very early for the ld.so link map, so it should be compiled
differently.
Reviewed-by: Stefan Liebler <stli@linux.ibm.com>
Tested-by: Stefan Liebler <stli@linux.ibm.com>
We were getting
../scripts/evaluate-test.sh posix/annexc $? true false > /usr/src/glibc-upstream/build/posix/annexc.test-result
In file included from ../include/pthread.h:1,
from <stdin>:1:
../sysdeps/htl/include/pthread.h:7:62: error: missing binary operator before token "("
7 | # if defined __USE_EXTERN_INLINES && defined _LIBC && !IS_IN (libsupport)
| ^
In some cases (e.g QEMU, non-Intel/AMD CPU) the cache information can
not be retrieved and the corresponding values are set to 0.
Commit 2d651eb926 ("x86: Move x86 processor cache info to
cpu_features") changed the behaviour in such case by defining the
__x86_shared_cache_size and __x86_data_cache_size variables to 0 instead
of using the default values. This cause an issue with the i686 SSE2
optimized bzero/routine which assumes that the cache size is at least
128 bytes, and otherwise tries to zero/set the whole address space minus
128 bytes.
Fix that by restoring the original code to only update
__x86_shared_cache_size and __x86_data_cache_size variables if the
corresponding cache sizes are not zero.
Fixes bug 28784
Fixes commit 2d651eb926
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
It is similar to epoll_wait, with the difference the timeout has
nanosecond resoluting by using struct timespec instead of int.
Although Linux interface only provides 64 bit time_t support, old
32 bit interface is also provided (so keep in sync with current
practice and to no force opt-in on 64 bit time_t).
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
When --disable-default-pie is used, all glibc programs and the testsuite
should be built as position dependent executables (non-PIE), regardless
if the build compiler supports PIE or static PIE.
When --disable-default-pie is used, don't build static PIE by default.
This fixes BZ #28780.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The usage of internal static symbol for statically linked binaries
does not work correctly for objects built with -D_TIME_BITS=64,
since the internal definition does not provide the expected aliases.
This patch makes it to use the default stat functions instead (which
uses the default 64 time_t alias and types).
Checked on i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The sunrpc function svcunix_create suffers from a stack-based buffer
overflow with overlong pathname arguments.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Processing an overlong pathname in the sunrpc clnt_create function
results in a stack-based buffer overflow.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
l_contiguous was not initialized at all for the main map and
always 0. This commit adds code to check if the LOAD segments
are adjacent to each other, and sets l_contiguous accordingly.
This helps _dl_find_object because it is more efficient if the
main mapping is contiguous.
Note that not all (PIE or non-PIE) binaries are contiguous in this
way because BFD ld creates executables with LOAD holes:
ELF LOAD segments creating holes in the process image on GNU/Linux
https://sourceware.org/pipermail/binutils/2022-January/119082.htmlhttps://sourceware.org/bugzilla/show_bug.cgi?id=28743
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
