After commit 37f802f864 (Remove
__need_IOV_MAX and __need_FOPEN_MAX), UIO_MAXIOV is no longer supplied
(indirectly) through <bits/stdio_lim.h>, so sysdeps/posix/sysconf.c no
longer sees the definition.
This patch adds a MIPS-specific bits/floatn.h header. This header is
identical to the ldbl-128 version except for the comment at the top;
the purpose is to ensure that a 32-bit MIPS build installs a header
that is the same as in a 64-bit MIPS build and so properly shows
_Float128 support to be available for 64-bit compilations, on the
general principle of an installation for one multilib providing
headers also suitable for other multilibs.
Tested with build-many-glibcs.py.
* sysdeps/mips/ieee754/bits/floatn.h: New file.
Similar to bug 21987 for SPARC, MIPS64 wrongly installs the ldbl-128
version of bits/long-double.h, meaning incorrect results when using
headers installed from a 64-bit installation for a 32-bit build. (I
haven't actually seen this cause build failures before its interaction
with bits/floatn.h did so - installed headers wrongly expecting
_Float128 to be available in a 32-bit configuration.)
This patch fixes the bug by moving the MIPS header to
sysdeps/mips/ieee754, which comes before sysdeps/ieee754/ldbl-128 in
the sysdeps directory ordering. (bits/floatn.h will need a similar
fix - duplicating the ldbl-128 version for MIPS will suffice - for
headers from a 32-bit installation to be correct for 64-bit builds.)
Tested with build-many-glibcs.py (compilers build for
mips64-linux-gnu, where there was previously a libstdc++ build failure
as at
<https://sourceware.org/ml/libc-testresults/2017-q4/msg00130.html>).
[BZ #22322]
* sysdeps/mips/bits/long-double.h: Move to ....
* sysdeps/mips/ieee754/bits/long-double.h: ... here.
This patch fixes a deadlock in the fastbin consistency check.
If we fail the fast check due to concurrent modifications to
the next chunk or system_mem, we should not lock if we already
have the arena lock. Simplify the check to make it obviously
correct.
* malloc/malloc.c (_int_free): Fix deadlock bug in consistency check.
This patch adds support for *f128 function aliases on platforms where
long double has the binary128 format (and thus GCC 7 provides the
_Float128 type with the same ABI as long double but as a distinct type
in terms of C type compatibility). This is the same API as provided
in glibc 2.26 for powerpc64le / x86_64 / x86 / ia64 where _Float128
has a different format from long double, with the bulk of the API
coming from TS 18661-3. All the functions alias the corresponding
long double functions, and __* function names are not provided since
those are only needed once for each floating-point format, not more
than once for different types with the same format (so for example,
-ffinite-math-only maps foof128 to __fool_finite, while type-generic
macros end up calling e.g. __issignalingl for _Float128 arguments on
such platforms).
The preparation for this feature was done in previous patches, so this
one just needs to add the relevant makefile and header definitions,
and update macro definitions of libm_alias_ldouble_other_r, to turn on
the feature, and update documentation and ABI baselines.
Tested (a) for x86_64, (b) for aarch64, (c) with build-many-glibcs.py
with both GCC 6 and GCC 7.
* sysdeps/ieee754/ldbl-128/Makeconfig: New file.
* sysdeps/ieee754/ldbl-128/bits/floatn.h: Likewise.
* sysdeps/ieee754/ldbl-128/float128-abi.h: Likewise.
* sysdeps/generic/libm-alias-ldouble.h: Include <bits/floatn.h>.
[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128]
(libm_alias_ldouble_other_r): Also create _Float128 alias.
* sysdeps/ieee754/ldbl-opt/libm-alias-ldouble.h: Include
<bits/floatn.h>.
[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128]
(libm_alias_ldouble_other_r): Also create _Float128 alias.
* manual/math.texi (Mathematics): Document additional architecture
support for _Float128.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
This patch rewrites aarch64 elf_machine_load_address to use special _DYNAMIC
symbol instead of _dl_start.
The static address of _DYNAMIC symbol is stored in the first GOT entry.
Here is the change which makes this solution work (part of binutils 2.24):
https://sourceware.org/ml/binutils/2013-06/msg00248.html
i386, x86_64 targets use the same method to do this as well.
The original implementation relies on a trick that R_AARCH64_ABS32 relocation
being resolved at link time and the static address fits in the 32bits.
However, in LP64, normally, the address is defined to be 64 bit.
Here is the C version one which should be portable in all cases.
* sysdeps/aarch64/dl-machine.h (elf_machine_load_address): Use
_DYNAMIC symbol to calculate load address.
A performance regression was introduced by commit
84d74e427a "powerpc: Cleanup fenv_private.h".
In the powerpc implementation of SET_RESTORE_ROUND, there is the
following code in the "SET" function (slightly simplified):
--
old.fenv = fegetenv_register ();
new.l = (old.l & _FPU_MASK_TRAPS_RN) | r; (1)
if (new.l != old.l) (2)
{
if ((old.l & _FPU_ALL_TRAPS) != 0)
(void) __fe_mask_env ();
fesetenv_register (new.fenv); (3)
--
Line (1) sets the value of "new" to the current value of FPSCR,
but masks off summary bits, exceptions, non-IEEE mode, and
rounding mode, then ORs in the new rounding mode.
Line (2) compares this new value to the current value in order to
avoid setting a new value in the FPSCR (line (3)) unless something
significant has changed (exception enables or rounding mode).
The summary bits are not germane to the comparison, but are cleared
in "new" and preserved in "old", resulting in false negative
comparisons, and unnecessarily setting the FPSCR in those cases
with associated negative performance impacts.
The solution is to treat the summaries identically for "new" and "old":
- save them in SET
- leave them alone otherwise
- restore the saved values in RESTORE
Also minor changes:
- expand _FPU_MASK_RN to 64bit hex, to match other MASKs
- treat bit 52 (left-to-right) as reserved (since it is)
* sysdeps/powerpc/fpu/fenv_private.h (_FPU_MASK_TRAPS_RN):
(_FPU_MASK_FRAC_INEX_RET_CC): Fix masks to more properly handle
summary bits.
(_FPU_MASK_RN): Expand _FPU_MASK_RN to 64bit hex.
(_FPU_MASK_NOT_RN_NI): Treat bit 52 (left-to-right) as reserved.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
[BZ #16777]
* localedata/locales/pl_PL (LC_MONETARY): Use U+202F as mon_thousands_sep
and improve readability by using more ASCII.
* localedata/locales/pl_PL (LC_NUMERIC): Use U+202F as thousands_sep
and improve readability by using more ASCII.
When using compilers before GCC 7, include/float.h provides fallback
definitions of FLT128_* constants. These definitions use 'Q' constant
suffixes, which works for configurations with _Float128 ABI-distinct
from long double, but not where it has the same ABI as long double.
This patch changes the definitions to use the __f128 macro from
<bits/floatn.h>, so allowing them to work in the non-distinct
_Float128 case (where they are used in building glibc tests, not for
building glibc itself) as well.
Tested (a) with build-many-glibcs.py with GCC 6 (installed stripped
shared libraries unchanged by the patch); (b) with
build-many-glibcs.py with GCC 6 together with the main patch to enable
float128 aliases; (c) for x86_64 with both GCC 6 and GCC 7.
* include/float.h [!__GNUC_PREREQ (7, 0) && __HAVE_FLOAT128 &&
__GLIBC_USE (IEC_60559_TYPES_EXT)] (FLT128_MAX): Define using
__f128.
[!__GNUC_PREREQ (7, 0) && __HAVE_FLOAT128 && __GLIBC_USE
(IEC_60559_TYPES_EXT)] (FLT128_EPSILON): Likewise.
[!__GNUC_PREREQ (7, 0) && __HAVE_FLOAT128 && __GLIBC_USE
(IEC_60559_TYPES_EXT)] (FLT128_MIN): Likewise.
[!__GNUC_PREREQ (7, 0) && __HAVE_FLOAT128 && __GLIBC_USE
(IEC_60559_TYPES_EXT)] (FLT128_TRUE_MIN): Likewise.
The current malloc initialization is quite convoluted. Instead of
sometimes calling malloc_consolidate from ptmalloc_init, call
malloc_init_state early so that the main_arena is always initialized.
The special initialization can now be removed from malloc_consolidate.
This also fixes BZ #22159.
Check all calls to malloc_consolidate and remove calls that are
redundant initialization after ptmalloc_init, like in int_mallinfo
and __libc_mallopt (but keep the latter as consolidation is required for
set_max_fast). Update comments to improve clarity.
Remove impossible initialization check from _int_malloc, fix assert
in do_check_malloc_state to ensure arena->top != 0. Fix the obvious bugs
in do_check_free_chunk and do_check_remalloced_chunk to enable single
threaded malloc debugging (do_check_malloc_state is not thread safe!).
[BZ #22159]
* malloc/arena.c (ptmalloc_init): Call malloc_init_state.
* malloc/malloc.c (do_check_free_chunk): Fix build bug.
(do_check_remalloced_chunk): Fix build bug.
(do_check_malloc_state): Add assert that checks arena->top.
(malloc_consolidate): Remove initialization.
(int_mallinfo): Remove call to malloc_consolidate.
(__libc_mallopt): Clarify why malloc_consolidate is needed.
Currently free typically uses 2 atomic operations per call. The have_fastchunks
flag indicates whether there are recently freed blocks in the fastbins. This
is purely an optimization to avoid calling malloc_consolidate too often and
avoiding the overhead of walking all fast bins even if all are empty during a
sequence of allocations. However using catomic_or to update the flag is
completely unnecessary since it can be changed into a simple boolean and
accessed using relaxed atomics. There is no change in multi-threaded behaviour
given the flag is already approximate (it may be set when there are no blocks in
any fast bins, or it may be clear when there are free blocks that could be
consolidated).
Performance of malloc/free improves by 27% on a simple benchmark on AArch64
(both single and multithreaded). The number of load/store exclusive instructions
is reduced by 33%. Bench-malloc-thread speeds up by ~3% in all cases.
* malloc/malloc.c (FASTCHUNKS_BIT): Remove.
(have_fastchunks): Remove.
(clear_fastchunks): Remove.
(set_fastchunks): Remove.
(malloc_state): Add have_fastchunks.
(malloc_init_state): Use have_fastchunks.
(do_check_malloc_state): Remove incorrect invariant checks.
(_int_malloc): Use have_fastchunks.
(_int_free): Likewise.
(malloc_consolidate): Likewise.
The functions tcache_get and tcache_put show up in profiles as they
are a critical part of the tcache code. Inline them to give tcache
a 16% performance gain. Since this improves multi-threaded cases
as well, it helps offset any potential performance loss due to adding
single-threaded fast paths.
* malloc/malloc.c (tcache_put): Inline.
(tcache_get): Inline.
The Valencian (meridional Catalan) locale is basically a copy of the
Catalan locale. The point of having a separate locale is only for PO
translations. This locale is already provided by several distributions
and is already supported by various projects like LibreOffice, Mozilla,
Gnome, KDE.
Aurelien Jarno <aurelien@aurel32.net>
[BZ #2522]
* localedata/locales/ca_ES@valencia: New file.
* localedata/SUPPORTED: Add ca_ES@valencia/UTF-8.
When using gcc < 6.x, signbit does not use the type-generic
__builtin_signbit builtin, instead it uses __MATH_TG.
However, when library support for float128 is available, __MATH_TG uses
__builtin_types_compatible_p, which is not available in C++ mode.
On the other hand, libstdc++ undefines (in cmath) many macros from
math.h, including signbit, so that it can provide its own functions.
However, during its configure tests, libstdc++ just tests for the
availability of the macros (it does not undefine them, nor does it
provide its own functions).
Finally, libstdc++ configure tests include math.h and get the definition
of signbit that uses __MATH_TG (and __builtin_types_compatible_p).
Since libstdc++ does not undefine the macros during its configure
tests, they fail.
This patch lets signbit use the builtin in C++ mode when gcc < 6.x is
used. This allows the configure test in libstdc++ to work.
Tested for x86_64.
[BZ #22296]
* math/math.h: Let signbit use the builtin in C++ mode with gcc
< 6.x
Cc: Gabriel F. T. Gomes <gftg@linux.vnet.ibm.com>
Cc: Joseph Myers <joseph@codesourcery.com>
This patch adds two extra configuration for arm-linux-gnueabihf to
cover for multiarch support:
1. arm-linux-gnueabihf-v7a: enables multiarch support by using
-march=armv7a.
2. Same as 1. but with --disable-multiarch.
Check with build-many-glibcs.py for both options.
* scripts/build-many-glibcs.py (Context.add_all_configs):
Add arm-linux-gnueabihf multiarch extra_glibcs.
This patch moves the generic definition from x86_64 init-arch
to a common header ifunc-init.h. No functional changes is expected.
Checked on a x86_64-linux-gnu build.
* sysdeps/generic/ifunc-init.h: New file.
* sysdeps/x86/init-arch.h: Use generic ifunc-init.h.
CLDR uses this pattern as well.
[BZ #22019]
* localedata/locales/el_GR: Set n_cs_precedes to 0.
* localedata/locales/el_CY: copy "el_GR" because it is identical.
* stdlib/tst-strfmon_l.c: adapt test case.
With support for _Float128 functions on platforms where that type has
the same ABI as long double, as well as on platforms where it is
ABI-distinct, those functions will need to be exported from glibc's
shared libraries at appropriate symbol versions in each case.
This patch avoids duplication of lists of symbols to export by moving
the symbols other than __* to math/Versions and stdlib/Versions.
There, they are conditional on <float128-abi.h> defining
FLOAT128_VERSION and a default version of that header is added that
does not define that macro. Enabling the float128 function aliases
will then include adding a sysdeps/ieee754/ldbl-128/float128-abi.h
that defines FLOAT128_VERSION to GLIBC_2.27. Symbols __* remain in
sysdeps/ieee754/float128/Versions; those symbols should be present
only once per floating-point format, not once per type.
Note that if any platforms currently lacking support for a type with
binary128 format get glibc support for such a type in future (whether
only as _Float128, or also as a new long double format), and new libm
functions (present for all types) have been added by then, additional
macros will be needed to allow such functions to get a version of the
form "GLIBC_2.28 if the platform had _Float128 support by then, or the
later version at which that platform had _Float128 support added".
This is not however a preexisting condition, but would have applied
equally to the existing support for _Float128 as an ABI-distinct
type. New all-type libm functions should just be added to the
appropriate symbol version (currently GLIBC_2.27) for all types, with
such special-case handling for _Float128 versions (and _Float64x as
well in future) waiting until someone actually wants to add support
for _Float128 to an existing platform after a release in which that
platform and a post-2.26 libm function had support but that platform
lacked _Float128 support.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch. Also tested in conjunction
with the remaining changes to enable float128 aliases.
* sysdeps/generic/float128-abi.h: New file.
* sysdeps/ieee754/float128/Versions (FLOAT128_VERSION): Move
non-__prefixed symbols to ....
* math/Versions: ... here. Include <float128-abi.h>.
* stdlib/Versions ... and here. Include <float128-abi.h>
Since glibc 2.24, __malloc_initialize_hook is a compat symbol. As a
result, the link editor does not export a definition of
__malloc_initialize_hook from the main program, so that it no longer
interposes the variable definition in libc.so. Specifying the symbol
version restores the exported symbol.
This patch adds support for running libm tests for float128 in the
case where the float128 functions are aliases of long double
functions. In this case, the sysdeps Makeconfig file
(i.e. sysdeps/ieee754/ldbl-128/Makeconfig) will need to define
"float128-alias-fcts = yes" to enable the tests.
Tested for x86_64. Also tested with build-many-glibcs.py; installed
stripped shared libraries are unchanged by the patch. Also tested
together with changes to enable the float128 aliases.
* math/Makefile (test-types): Add
$(type-float128-$(float128-alias-fcts)).
* math/test-float128.h (TYPE_STR): Define conditional on
[FLT128_MANT_DIG == LDBL_MANT_DIG].
(ULP_IDX): Likewise.
(ULP_I_IDX): Likewise.
This patch adds support for building strtof128, wcstof128, strtof128_l
and wcstof128_l as aliases, in the case of __HAVE_FLOAT128 &&
!__HAVE_DISTINCT_FLOAT128.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch. Also tested together with
changes to enable float128 aliases.
* stdlib/strtold.c: Include <bits/floatn.h>
[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128] (strtof128): Define
and later undefine as macro. Define as weak alias if
[!USE_WIDE_CHAR].
[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128] (wcstof128): Define
and later undefine as macro. Define as weak alias if
[USE_WIDE_CHAR].
* sysdeps/ieee754/ldbl-128/strtold_l.c [__HAVE_FLOAT128 &&
!__HAVE_DISTINCT_FLOAT128] (strtof128_l): Define and later
undefine as macro. Define as weak alias if [!USE_WIDE_CHAR].
[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128] (wcstof128_l):
Define and later undefine as macro. Define as weak alias if
[USE_WIDE_CHAR].
* sysdeps/ieee754/ldbl-64-128/strtold_l.c: Include
<bits/floatn.h>.
[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128] (strtof128_l):
Define and later undefine as macro. Define as weak alias if
[!USE_WIDE_CHAR].
[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128] (wcstof128_l):
Define and later undefine as macro. Define as weak alias if
[USE_WIDE_CHAR].
Recorded verbose messages no longer need to pass \n in their
message string since the record_verbose function adds \n to
the messages (like error and warnings do also). The avoids
seeing a double \n for verbose messages.
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
realloc_check has
unsigned char *magic_p;
...
__libc_lock_lock (main_arena.mutex);
const mchunkptr oldp = mem2chunk_check (oldmem, &magic_p);
__libc_lock_unlock (main_arena.mutex);
if (!oldp)
malloc_printerr ("realloc(): invalid pointer");
...
if (newmem == NULL)
*magic_p ^= 0xFF;
with
static void malloc_printerr(const char *str) __attribute__ ((noreturn));
GCC 7 -O3 warns
hooks.c: In function ‘realloc_check’:
hooks.c:352:14: error: ‘magic_p’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
*magic_p ^= 0xFF;
due to the GCC bug:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82090
This patch silences GCC 7 by using DIAG_IGNORE_NEEDS_COMMENT.
[BZ #22052]
* malloc/hooks.c (realloc_check): Use DIAG_IGNORE_NEEDS_COMMENT
to silence -O3 -Wall warning with GCC 7.
The function, main, is added to profiling output of static executable
which must link against gcrt1.o.
* Makeconfig (+link-static-before-libc): Use the first of
$(CRT-$(@F)) and $(csu-objpfx)$(static-start-installed-name).
* gmon/Makefile (tests): Add tst-gmon-static.
(tests-static): Likewise.
(CFLAGS-tst-gmon-static.c): New.
(CRT-tst-gmon-static): Likewise.
(DEFAULT-LDFLAGS-tst-gmon-static): Likewise.
(tst-gmon-static-ENV): Likewise.
(tests-special): Likewise.
($(objpfx)tst-gmon-static.out): Likewise.
(clean-tst-gmon-static-data): Likewise.
($(objpfx)tst-gmon-static-gprof.out): Likewise.
* gmon/tst-gmon-static-gprof.sh: New file.
* gmon/tst-gmon-static.c: Likewise.
In "Is it OK to write ASCII strings directly into locale source files?"
https://sourceware.org/ml/libc-alpha/2017-07/msg00807.html there is
universal consensus that we do not have to keep writing <Uxxxx> symbolic
characters in locale files.
Ulrich Drepper's historical comment was that symbolic characters were
used for the eventuality of converting the source files to any encoding
system. Fast forward to today and UTF-8 is the standard. So the
requirement of <Uxxxx> is hard to justify.
Zack Weinberg's excellent scripts are coming along we can use these to
find instances of human errors in the scripts:
https://sourceware.org/ml/libc-alpha/2017-07/msg00860.htmlhttps://sourceware.org/ml/libc-alpha/2017-08/msg00136.html
It still won't be easy to distinguish from i for í, but that's still the
case for <Uxxxx> characters which humans can't read either.
Since we all agreed that we should be able to use non-symbolic (<Uxxxx>)
characters in locale files, the following change removes the verbose
warning that is raised if you use non-symbolic characters in the locale
file.
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
The builtin POSIX locale has "" as the international currency symbol,
but a non-builtin locale may not have such a blank int_curr_symbol.
Therefore to support non-builtin locales with similar "" int_curr_symbol
we adjust the LC_MONETARY parser to allow the normal 4-character
int_curr_symbol *and* the empty "" no symbol. Anything else remains
invalid.
Tested by building all the locales. Tested also with a custom C.UTF-8
locale with "" for int_curr_symbol.
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
The error and warning handling in localedef, locale, and iconv
is a bit of a mess.
We use ugly constructs like this:
WITH_CUR_LOCALE (error (1, errno, gettext ("\
cannot read character map directory `%s'"), directory));
to issue errors, and read error_message_count directly from the
error API to detect errors. The problem with that is that the
code also uses error to print warnings, and informative messages.
All of this leads to problems where just having warnings will
produce an exit status as-if errors had been seen.
To fix this situation I have adopted the following high-level
changes:
* All errors are counted distinctly.
* All warnings are counted distinctly.
* All informative messages are not counted.
* Increasing verbosity cannot generate *more* errors, and
it previously did for errors conditional on verbose,
this is now fixed.
* Increasing verbosity *can* generate *more* warnings.
* Making the output quiet cannot generate *fewer* errors,
and it previously did for errors conditional on be_quiet,
this is now fixed.
* Each of error, warning, and informative message has it's
own function to call defined in record-status.h, and they
are: record_error, record_warning, and record_verbose.
* The record_error function always records an error, but
conditional on be_quiet may not print it.
* The record_warning function always records a warning,
but conditional on be_quiet may not print it.
* The record_verbose function only prints the verbose
message if verbose is true and be_quiet is false.
This has allowed the following fix:
* Previously any warnings were being treated as errors
because they incremented error_message_count, but now
we properly return an exit status of 1 if there are
warnings but output was generated.
All of this allows localedef to correctly decide if errors,
or warnings were present, and produce the correct exit code.
The locale and iconv programs now also use record-status.h
and we have removed the WITH_CUR_LOCALE hack, and instead
have internal push_locale/pop_locale functions centralized
in the record routines.
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
The commit does the following things:
* Move non-transliteration Unicode generated data to i18n_ctype.
* Copy the i18n_ctype data into i18n and add transliteration.
In the future, any locale which needs Unicode LC_CTYPE data can
also just use `copy i18n_ctype` and get the base character classes
and maps without transliteration.
Tested by compiling all the locales and my prototype C.UTF-8 which
uses it.
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
This patch adds support for building strfromf128 as an alias of
strfroml, in the case of __HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch. Also tested together with
changes to enable float128 aliases.
* stdlib/strfroml.c: Include <bits/floatn.h>.
[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128] (strfromf128):
Define before include of <stdlib.h> and undefine afterwards, then
define as weak alias.
This patch makes ldbl-64-128/s_nextafterl.c restore the default
weak_alias definition and use libm_alias_ldouble_other (having
undefined and redefined weak_alias for the include of
ldbl-128/s_nextafterl.c, so the libm_alias_ldouble use in the latter
file is ineffective).
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch. Also tested together with
changes to enable float128 aliases.
* sysdeps/ieee754/ldbl-64-128/s_nextafterl.c (weak_alias):
Undefine and restore default definition. Use
libm_alias_ldouble_other.
Normally, TLS relocations against local symbols are optimised by the linker
to be absolute. However, gold does not do this, and so it is possible to
end up with, for example, R_SPARC_TLS_DTPMOD64 referring to a local symbol.
Since sym_map is left as null in elf_machine_rela for the special local
symbol case, the relocation handling thinks it has nothing to do, and so
the module gets left as 0. Havoc then ensues when the variable in question
is accessed.
Before this fix, the main_local_gold program would receive a SIGBUS on
sparc64, and SIGSEGV on powerpc32. With this fix applied, that test now
passes like the rest of them.
* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_rela):
Assign sym_map to be map for local symbols, as TLS relocations
use sym_map to determine whether the symbol is defined and to
extract the TLS information.
* sysdeps/sparc/sparc32/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/sparc/sparc64/dl-machine.h (elf_machine_rela): Likewise.
Fix the ifdef clause that was being used in the opposite way, setting
a wrong value of the carry bit.
This is also correcting 2 memory accesses that were mistakenly referring
to r0 while they were supposed to mean the immediate value 0.
[BZ #22142]
* stdio-common/tst-printf.c (fp_test): Add tests for DBL_MAX and
-DBL_MAX.
(do_test): Likewise.
* stdio-common/tst-printf.sh: Likewise.
* sysdeps/powerpc/powerpc64/power7/add_n.S: Invert the initial
ifdef clause in order to set the carry bit right. Replace r0 by
0 without changing the behavior.
This patch makes SPARC fabsl implementation use libm_alias_ldouble, to
prepare them for also defining _Float128 function aliases.
Tested with build-many-glibcs.py that installed stripped shared
libraries (sparc64-linux-gnu and sparcv9-linux-gnu) are unchanged by
the patch.
* sysdeps/sparc/sparc32/fpu/s_fabsl.c: Include
<libm-alias-ldouble.h>.
(fabsl): Define using libm_alias_ldouble.
* sysdeps/sparc/sparc64/fpu/s_fabsl.c: Include
<libm-alias-ldouble.h>.
(fabsl): Define using libm_alias_ldouble.
Testing with changes to enable _Float128 function aliases shows that
the libm_alias_ldouble_other usage in ldbl-opt/w_lgamma_compatl.c does
not in fact work. Furthermore, it is unnecessary; the relevant
aliases get created through w_lgammal_compat2.c. This patch removes
the problem code.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by the patch. Also tested in conjunction with
patches to enable _Float128 function aliases.
* sysdeps/ieee754/ldbl-opt/w_lgamma_compatl.c [BUILD_LGAMMA]:
Remove conditional code.
Testing with changes to enable _Float128 function aliases shows that
the libm_alias_ldouble_other usage in ldbl-opt/s_clog10l.c does not in
fact work, because __clog10l is defined with long_double_symbol rather
than as a normal C alias. This patch fixes this by renaming the
__clog10l__internal alias (not strictly necessary, but avoids a hack
with "__clog10l_interna" / "__clog10l__interna" as first argument to
libm_alias_ldouble_other) and using the renamed alias when calling
libm_alias_ldouble_other.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanges by the patch. Also tested in conjunction with
patches to enable _Float128 function aliases.
* sysdeps/ieee754/ldbl-opt/s_clog10l.c (__clog10l__internal):
Rename to __clog10_internal_l.
(__clog10_internal_l): Define aliases using
libm_alias_ldouble_other instead of using libm_alias_ldouble_other
with __clog10.
