Since elf.h is a public header file copied to other projects,
try to make it free from spelling typos.
This change fixes the following spelling typos in comments of elf.h:
Auxialiary -> Auxiliary
tenatively -> tentatively
compatability -> compatibility
_dl_map_object_deps always sorts the initially loaded object first
during dependency sorting. This means it is relocated last in
dl_open_worker. This results in crashes in IFUNC resolvers without
lazy bindings if libraries are preloaded that refer to IFUNCs in
libc.so.6: the resolvers are called when libc.so.6 has not been
relocated yet, so references to _rtld_global_ro etc. crash.
The fix is to check against the libc.so.6 link map recorded by the
__libc_early_init framework, and let it participate in the dependency
sort.
This fixes bug 20972.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
To handle GNU property notes on aarch64 some segments need to
be mmaped again, so the fd of the loaded ELF module is needed.
When the fd is not available (kernel loaded modules), then -1
is passed.
The fd is passed to both _dl_process_pt_gnu_property and
_dl_process_pt_note for consistency. Target specific note
processing functions are updated accordingly.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Program headers are processed in two pass: after the first pass
load segments are mmapped so in the second pass target specific
note processing logic can access the notes.
The second pass is moved later so various link_map fields are
set up that may be useful for note processing such as l_phdr.
The second pass should be before the fd is closed so that is
available.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Subdirectories z13, z14, z15 can be selected, mostly based on the
level of support for vector instructions.
Co-Authored-By: Stefan Liebler <stli@linux.ibm.com>
The misattributed dependencies can cause failures in parallel testing
if the dependencies have not been built yet.
Fixes commit a332bd1518
("elf: Add elf/tst-dlopenfail-2 [BZ #25396]").
This recognizes the DL_CACHE_HWCAP_EXTENSION flag in cache entries,
and picks the supported cache entry with the highest priority.
The elf/tst-glibc-hwcaps-prepend-cache test documents a non-desired
aspect of the current cache implementation: If the cache selects a DSO
that does not exist on disk, _dl_map_object falls back to open_path,
which may or may not find an alternative implementation. This is an
existing limitation that also applies to the legacy hwcaps processing
for ld.so.cache.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Libraries from these subdirectories are added to the cache
with a special hwcap bit DL_CACHE_HWCAP_EXTENSION, so that
they are ignored by older dynamic loaders.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This simplifies the string table construction in elf/cache.c
because there is no more need to keep track of offsets explicitly;
the string table implementation does this internally.
This change slightly reduces the size of the cache on disk. The
file format does not change as a result. The strings are
null-terminated, without explicit length, so tail merging is
transparent to readers.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This will be used in ldconfig to reduce the ld.so.cache size slightly.
Tail merging is an optimization where a pointer points into another
string if the first string is a suffix of the second string.
The hash function FNV-1a was chosen because it is simple and achieves
good dispersion even for short strings (so that the hash table bucket
count can be a power of two). It is clearly superior to the hsearch
hash and the ELF hash in this regard.
The hash table uses chaining for collision resolution.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
A previously unused new-format header field is used to record
the address of an extension directory.
This change adds a demo extension which records the version of
ldconfig which builds a file.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Use a reserved byte in the new format cache header to indicate whether
the file is in little endian or big endian format. Eventually, this
information could be used to provide a unified cache for qemu-user
and similiar scenarios.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This hacks non-power-set processing into _dl_important_hwcaps.
Once the legacy hwcaps handling goes away, the subdirectory
handling needs to be reworked, but it is premature to do this
while both approaches are still supported.
ld.so supports two new arguments, --glibc-hwcaps-prepend and
--glibc-hwcaps-mask. Each accepts a colon-separated list of
glibc-hwcaps subdirectory names. The prepend option adds additional
subdirectories that are searched first, in the specified order. The
mask option restricts the automatically selected subdirectories to
those listed in the option argument. For example, on systems where
/usr/lib64 is on the library search path,
--glibc-hwcaps-prepend=valgrind:debug causes the dynamic loader to
search the directories /usr/lib64/glibc-hwcaps/valgrind and
/usr/lib64/glibc-hwcaps/debug just before /usr/lib64 is searched.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
On GNU/Hurd we not only need $(common-objpfx) in LD_LIBRARY_PATH when loading
dynamic objects, but also $(common-objpfx)/mach and $(common-objpfx)/hurd. This
adds an ld-library-path variable to be used as LD_LIBRARY_PATH basis in
Makefiles, and a sysdep-ld-library-path variable for sysdeps to add some
more paths, here mach/ and hurd/.
Now __thread_gscope_wait (the function behind THREAD_GSCOPE_WAIT,
formerly __wait_lookup_done) can be implemented directly in ld.so,
eliminating the unprotected GL (dl_wait_lookup_done) function
pointer.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
We need NO_RTLD_HIDDEN because of the need for PLT calls in ld.so.
See Roland's comment in
https://sourceware.org/bugzilla/show_bug.cgi?id=15605
"in the Hurd it's crucial that calls like __mmap be the libc ones
instead of the rtld-local ones after the bootstrap phase, when the
dynamic linker is being used for dlopen and the like."
We used to just avoid all hidden use in the rtld ; this commit switches to
keeping only those that should use PLT calls, i.e. essentially those defined in
sysdeps/mach/hurd/dl-sysdep.c:
__assert_fail
__assert_perror_fail
__*stat64
_exit
This fixes a few startup issues, notably the call to __tunable_get_val that is
made before PLTs are set up.
struct file_entry_new starts with the fields of struct file_entry,
so the code can be shared if the size computation is made dynamic.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The elf/elf.h header is shared, verbatim, by the elfutils project.
However, elfutils can be used on systems with libcs other than glibc,
making the presence of __BEGIN_DECLS, __END_DECLS and <features.h> in
the file something that downstream distros may have to add patches for.
Furthermore, this file doesn't declare anything with language linkage,
so `extern "C" {}` blocks aren't necessary; it also doesn't have any
conditional definitions based on feature test macros, making inclusion
of features.h unnecessary.
The SXID_* tunable properties only influence processes that are
AT_SECURE, so make that a bit more explicit in the documentation and
comment.
Revisiting the code after a few years I managed to confuse myself, so
I imagine there could be others who may have incorrectly assumed like
I did that the SXID_ERASE tunables are not inherited by children of
non-AT_SECURE processes.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
They have been renamed from env_path_list and rtld_search_dirs to
avoid linknamespace issues.
This change will allow future use these variables in diagnostics.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This requires defining a macro for the full path, matching the
-Wl,--dynamic-link= arguments used for linking glibc programs,
and ldd script.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This prints out version information for the dynamic loader and
exits immediately, without further command line processing
(which seems to match what some GNU tools do).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
--help processing is deferred to the point where the executable has
been loaded, so that it is possible to eventually include information
from the main executable in the help output.
As suggested in the GNU command-line interface guidelines, the help
message is printed to standard output, and the exit status is
successful.
Handle usage errors closer to the GNU command-line interface
guidelines.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Also add a comment to elf/Makefile, explaining why we cannot use
config.status for autoconf template processing.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Introduce struct dl_main_state and move it to <dl-main.h>. Rename
enum mode to enum rtld_mode and add the rtld_mode_ prefix to the enum
constants.
This avoids the need for putting state that is only needed during
startup into the ld.so data segment.
In some cases, it is difficult to determine the kind of malloc
based on the execution context, so a function to determine that
is helpful.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The generic version is parallel to _dl_writev. It cannot use
_dl_writev directly because the errno value needs to be obtained
under a lock.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This functionality does not seem to be useful since static dlopen
is mostly used for iconv/character set conversion and NSS support.
gconv modules are loaded with full paths anyway, so that the
HWCAP subdirectory logic does not apply.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Some tunable values and their minimum/maximum values must be determinted
at run-time. Add TUNABLE_SET_WITH_BOUNDS and TUNABLE_SET_WITH_BOUNDS_FULL
to update tunable value together with minimum and maximum values.
__tunable_set_val is updated to set tunable value as well as min/max
values.
It replaces the internal usage of __{f,l}xstat{at}{64} with the
__{f,l}stat{at}{64}. It should not change the generate code since
sys/stat.h explicit defines redirections to internal calls back to
xstat* symbols.
Checked with a build for all affected ABIs. I also check on
x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Constants double checked against binutils and the ELF for the Arm 64-bit
Architecture (AArch64) Release 2020Q2 document.
Only BTI PLT is used in glibc, there's no PAC PLT with glibc, and people
are expected to use BIND_NOW.
The _sys_errlist and _sys_siglist symbols are deprecated since 2.32.
This patch adds a TEST_COMPAT check around the tests. This fixes test
failures on new architectures (such as RV32) that don't have this
symbol defined.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Make the computation in elf/dl-tls.c more transparent, and add
an explicit test for the historic value.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The kernel ABI is not finalized, and there are now various proposals
to change the size of struct rseq, which would make the glibc ABI
dependent on the version of the kernels used for building glibc.
This is of course not acceptable.
This reverts commit 48699da1c4 ("elf:
Support at least 32-byte alignment in static dlopen"), commit
8f4632deb3 ("Linux: rseq registration
tests"), commit 6e29cb3f61 ("Linux: Use
rseq in sched_getcpu if available"), and commit
0c76fc3c2b ("Linux: Perform rseq
registration at C startup and thread creation"), resolving the conflicts
introduced by the ARC port and the TLS static surplus changes.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
On some targets static TLS surplus area can be used opportunistically
for dynamically loaded modules such that the TLS access then becomes
faster (TLSDESC and powerpc TLS optimization). However we don't want
all surplus TLS to be used for this optimization because dynamically
loaded modules with initial-exec model TLS can only use surplus TLS.
The new contract for surplus static TLS use is:
- libc.so can have up to 192 bytes of IE TLS,
- other system libraries together can have up to 144 bytes of IE TLS.
- Some "optional" static TLS is available for opportunistic use.
The optional TLS is now tunable: rtld.optional_static_tls, so users
can directly affect the allocated static TLS size. (Note that module
unloading with dlclose does not reclaim static TLS. After the optional
TLS runs out, TLS access is no longer optimized to use static TLS.)
The default setting of rtld.optional_static_tls is 512 so the surplus
TLS is 3*192 + 4*144 + 512 = 1664 by default, the same as before.
Fixes BZ #25051.
Tested on aarch64-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The new static TLS surplus size computation is
surplus_tls = 192 * (nns-1) + 144 * nns + 512
where nns is controlled via the rtld.nns tunable. This commit
accounts audit modules too so nns = rtld.nns + audit modules.
rtld.nns should only include the namespaces required by the
application, namespaces for audit modules are accounted on top
of that so audit modules don't use up the static TLS that is
reserved for the application. This allows loading many audit
modules without tuning rtld.nns or using up static TLS, and it
fixes
FAIL: elf/tst-auditmany
Note that DL_NNS is currently a hard upper limit for nns, and
if rtld.nns + audit modules go over the limit that's a fatal
error. By default rtld.nns is 4 which allows 12 audit modules.
Counting the audit modules is based on existing audit string
parsing code, we cannot use GLRO(dl_naudit) before the modules
are actually loaded.
TLS_STATIC_SURPLUS is 1664 bytes currently which is not enough to
support DL_NNS (== 16) number of dynamic link namespaces, if we
assume 192 bytes of TLS are reserved for libc use and 144 bytes
are reserved for other system libraries that use IE TLS.
A new tunable is introduced to control the number of supported
namespaces and to adjust the surplus static TLS size as follows:
surplus_tls = 192 * (rtld.nns-1) + 144 * rtld.nns + 512
The default is rtld.nns == 4 and then the surplus TLS size is the
same as before, so the behaviour is unchanged by default. If an
application creates more namespaces than the rtld.nns setting
allows, then it is not guaranteed to work, but the limit is not
checked. So existing usage will continue to work, but in the
future if an application creates more than 4 dynamic link
namespaces then the tunable will need to be set.
In this patch DL_NNS is a fixed value and provides a maximum to
the rtld.nns setting.
Static linking used fixed 2048 bytes surplus TLS, this is changed
so the same contract is used as for dynamic linking. With static
linking DL_NNS == 1 so rtld.nns tunable is forced to 1, so by
default the surplus TLS is reduced to 144 + 512 = 656 bytes. This
change is not expected to cause problems.
Tested on aarch64-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Add generic code to handle PT_GNU_PROPERTY notes. Invalid
content is ignored, _dl_process_pt_gnu_property is always called
after PT_LOAD segments are mapped and it has no failure modes.
Currently only one NT_GNU_PROPERTY_TYPE_0 note is handled, which
contains target specific properties: the _dl_process_gnu_property
hook is called for each property.
The old _dl_process_pt_note and _rtld_process_pt_note differ in how
the program header is read. The old _dl_process_pt_note is called
before PT_LOAD segments are mapped and _rtld_process_pt_note is called
after PT_LOAD segments are mapped. The old _rtld_process_pt_note is
removed and _dl_process_pt_note is always called after PT_LOAD
segments are mapped and now it has no failure modes.
The program headers are scanned backwards so that PT_NOTE can be
skipped if PT_GNU_PROPERTY exists.
Co-Authored-By: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The auditing interface identifies namespaces by their first loaded
module. Once the namespace is empty, it is no longer possible to signal
LA_ACT_CONSISTENT for it because the first loaded module is already gone
at that point.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The variable is placed in libc.so, and it can be true only in
an outer libc, not libcs loaded via dlmopen or static dlopen.
Since thread creation from inner namespaces does not work,
pthread_create can update __libc_single_threaded directly.
Using __libc_early_init and its initial flag, implementation of this
variable is very straightforward. A future version may reset the flag
during fork (but not in an inner namespace), or after joining all
threads except one.
Reviewed-by: DJ Delorie <dj@redhat.com>
Register rseq TLS for each thread (including main), and unregister for
each thread (excluding main). "rseq" stands for Restartable Sequences.
See the rseq(2) man page proposed here:
https://lkml.org/lkml/2018/9/19/647
Those are based on glibc master branch commit 3ee1e0ec5c.
The rseq system call was merged into Linux 4.18.
The TLS_STATIC_SURPLUS define is increased to leave additional room for
dlopen'd initial-exec TLS, which keeps elf/tst-auditmany working.
The increase (76 bytes) is larger than 32 bytes because it has not been
increased in quite a while. The cost in terms of additional TLS storage
is quite significant, but it will also obscure some initial-exec-related
dlopen failures.
Now that ldconfig defaults to the new format (only), check for it
first. Also apply the corruption check added in commit 2954daf00b
("Add more checks for valid ld.so.cache file (bug 18093)") to the
new-format-only case.
Suggested-by: Josh Triplett <josh@joshtriplett.org>
The existing macros are fragile and expect local variables with a
certain name. Fix this by defining them as functions with default
implementation in a new header dl-runtime.h which arches can override
if need be.
This came up during ARC port review, hence the need for argument pltgot
in reloc_index() which is not needed by existing ports.
This patch potentially only affects hppa/x86 ports,
build tested for both those configs and a few more.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
There are:
#define TUNABLE_SET_VAL_IF_VALID_RANGE(__cur, __val, __type) \
({ \
__type min = (__cur)->type.min; \
__type max = (__cur)->type.max; \
\
if ((__type) (__val) >= min && (__type) (val) <= max) \
^^^ Should be __val
{ \
(__cur)->val.numval = val; \
^^^ Should be __val
(__cur)->initialized = true; \
} \
})
Luckily since all TUNABLE_SET_VAL_IF_VALID_RANGE usages are
TUNABLE_SET_VAL_IF_VALID_RANGE (cur, val, int64_t);
this didn't cause any issues.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Historically, this mechanism was used to process "nosegneg"
subdirectories, and it is still used to include the "tls"
subdirectories. With nosegneg support gone from ld.so, this is part
no longer useful.
The entire mechanism is not well-designed because it causes the
meaning of hwcap bits in ld.so.cache to depend on the kernel version
that was used to generate the cache, which makes it difficult to use
this mechanism for anything else in the future.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This was only ever used for the "nosegneg" flag. This approach for
passing hardware capability information creates a subtle dependency
between the kernel and userspace, and ld.so.cache contents. It seems
inappropriate for toady, where people expect to be able to run
system images which very different kernel versions.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This change makes it easier to set a breakpoint on these calls.
This also addresses the issue that including <ldsodefs.h> without
<unistd.h> does not result usable _dl_*printf macros because of the
use of the STD*_FILENO macros there.
(The private symbol for _dl_fatal_printf will go away again
once the exception handling implementation is unified between
libc and ld.so.)
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
These property values are specified by the AArch64 ELF ABI and
binutils can create binaries marked with them.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This was originally added to support binutils older than version
2.22:
<https://sourceware.org/ml/libc-alpha/2010-12/msg00051.html>
Since 2.22 is older than the minimum required binutils version
for building glibc, we no longer need this. (The changes do
not impact the statically linked startup code.)
If we try to run constructors before relocation, this is always
a dynamic linker bug. An assert is easier to notice than a call
via an invalid function pointer (which may not even produce a valid
call stack).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
1. Include <dl-procruntime.c> to get architecture specific initializer in
rtld_global.
2. Change _dl_x86_feature_1[2] to _dl_x86_feature_1.
3. Add _dl_x86_feature_control after _dl_x86_feature_1, which is a
struct of 2 bitfields for IBT and SHSTK control
This fixes [BZ #25887].
The second call does not do anything because the data structures have
already been resized by the call that comes before the demarcation
point. Fixes commit a509eb117f
("Avoid late dlopen failure due to scope, TLS slotinfo updates
[BZ #25112]").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Improve the commentary to aid future developers who will stumble
upon this novel, yet not always perfect, mechanism to support
alternative formats for long double.
Likewise, rename __LONG_DOUBLE_USES_FLOAT128 to
__LDOUBLE_REDIRECTS_TO_FLOAT128_ABI now that development work
has settled down. The command used was
git grep -l __LONG_DOUBLE_USES_FLOAT128 ':!./ChangeLog*' | \
xargs sed -i 's/__LONG_DOUBLE_USES_FLOAT128/__LDOUBLE_REDIRECTS_TO_FLOAT128_ABI/g'
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
The rseq initialization should happen only for the libc in the base
namespace (in the dynamic case) or the statically linked libc. The
__libc_multiple_libcs flag does not quite cover this case at present,
so this commit introduces a flag argument to __libc_early_init,
indicating whether the libc being libc is the primary one (of the main
program).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This function is defined in libc.so, and the dynamic loader calls
right after relocation has been finished, before any ELF constructors
or the preinit function is invoked. It is also used in the static
build for initializing parts of the static libc.
To locate __libc_early_init, a direct symbol lookup function is used,
_dl_lookup_direct. It does not search the entire symbol scope and
consults merely a single link map. This function could also be used
to implement lookups in the vDSO (as an optimization).
A per-namespace variable (libc_map) is added for locating libc.so,
to avoid repeated traversals of the search scope. It is similar to
GL(dl_initfirst). An alternative would have been to thread a context
argument from _dl_open down to _dl_map_object_from_fd (where libc.so
is identified). This could have avoided the global variable, but
the change would be larger as a result. It would not have been
possible to use this to replace GL(dl_initfirst) because that global
variable is used to pass the function pointer past the stack switch
from dl_main to the main program. Replacing that requires adding
a new argument to _dl_init, which in turn needs changes to the
architecture-specific libc.so startup code written in assembler.
__libc_early_init should not be used to replace _dl_var_init (as
it exists today on some architectures). Instead, _dl_lookup_direct
should be used to look up a new variable symbol in libc.so, and
that should then be initialized from the dynamic loader, immediately
after the object has been loaded in _dl_map_object_from_fd (before
relocation is run). This way, more IFUNC resolvers which depend on
these variables will work.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
MIPS needs to ignore certain existing symbols during symbol lookup.
The old scheme uses the ELF_MACHINE_SYM_NO_MATCH macro, with an
inline function, within its own header, with a sysdeps override for
MIPS. This allows re-use of the function from another file (without
having to include <dl-machine.h> or providing the default definition
for ELF_MACHINE_SYM_NO_MATCH).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
GNU ld and gold's -Map include a line like:
path/to/build/libc_pic.a(check_fds.os)
lld -Map does not have the archive member list, but we can still derive the
members from the following output
VMA LMA Size Align Out In Symbol
...
1a1c0 1a1c0 e2 16 path/to/build/libc_pic.a(check_fds.os):(.text)
binutils ld has supported --audit, --depaudit for a long time,
only support in glibc has been missing.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
All list elements are colon-separated strings, and there is a hard
upper limit for the number of audit modules, so it is possible to
pre-allocate a fixed-size array of strings to which the LD_AUDIT
environment variable and --audit arguments are added.
Also eliminate the global variables for the audit list because
the list is only needed briefly during startup.
There is a slight behavior change: All duplicate LD_AUDIT environment
variables are now processed, not just the last one as before. However,
such environment vectors are invalid anyway.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The ldbl redirects for ieee128 have some jagged edges when
inspecting and manipulating symbols directly.
e.g asprintf is unconditionally redirected to __asprintfieee128
thus any tests relying on GCC's redirect behavior will encounter
problems if they inspect the symbol names too closely.
I've mitigated tests which expose the limitations of the
ldbl -> f128 redirects by giving them knowledge about the
redirected symbol names.
Hopefully there isn't much user code which depends on this
implementation specific behavior.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
With this patch, -v turns on a "from" trace for each directory
searched, that tells you WHY that directory is being searched -
is it a builtin, from the command line, or from some config file?
Writable, executable segments defeat security hardening. The
existing check for DT_TEXTREL does not catch this.
hppa and SPARC currently keep the PLT in an RWX load segment.
The present code leaves the function pointers unprotected, but moves
some of the static functions into .data.rel.ro instead. This causes
the linker to produce an allocatable, executable, writable section
and eventually an RWX load segment. Not only do we really do not
want that, it also breaks valgrind because valgrind does not load
debuginfo from the mmap interceptor if all it sees are RX and RWX
mappings.
Fixes commit 3a0ecccb59 ("ld.so: Do not
export free/calloc/malloc/realloc functions [BZ #25486]").
On !ELF_INITFINI architectures, _init is no longer called by the
dynamic linker. We can use an ELF constructor instead because the
constructor order does not matter. (The other constructors are used
to set up libio vtable bypasses and do not depend on this
initialization routine.)
This supersedes the init_array sysdeps directory. It allows us to
check for ELF_INITFINI in both C and assembler code, and skip DT_INIT
and DT_FINI processing completely on newer architectures.
A new header file is needed because <dl-machine.h> is incompatible
with assembler code. <sysdep.h> is compatible with assembler code,
but it cannot be included in all assembler files because on some
architectures, it redefines register names, and some assembler files
conflict with that.
<elf-initfini.h> is replicated for legacy architectures which need
DT_INIT/DT_FINI support. New architectures follow the generic default
and disable it.
Exporting functions and relying on symbol interposition from libc.so
makes the choice of implementation dependent on DT_NEEDED order, which
is not what some compiler drivers expect.
This commit replaces one magic mechanism (symbol interposition) with
another one (preprocessor-/compiler-based redirection). This makes
the hand-over from the minimal malloc to the full malloc more
explicit.
Removing the ABI symbols is backwards-compatible because libc.so is
always in scope, and the dynamic loader will find the malloc-related
symbols there since commit f0b2132b35
("ld.so: Support moving versioned symbols between sonames
[BZ #24741]").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The definitions are moved into a new file, elf/dl-sym-post.h, so that
this code can be used by the dynamic loader as well.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This generalizes a mechanism used for stack-protector support, so
that it can be applied to other symbols if required.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
As the sort was removed, there's no need to keep a separate map of
links. Instead, when relocating objects iterate over l_initfini
directly.
This allows us to remove the loop copying l_initfini elements into
map. We still need a loop to identify the first and last elements that
need relocation.
Tested by running the testsuite on x86_64.
l_initfini is already sorted by dependency in _dl_map_object_deps(),
so avoid sorting again in dl_open_worker().
Tested by running the testsuite on x86_64.
There are two fixes that are needed to be able to dlopen filter
objects. First _dl_map_object_deps cannot assume that map will be at
the beginning of l_searchlist.r_list[], as filtees are inserted before
map. Secondly dl_open_worker needs to ensure that filtees get
relocated.
In _dl_map_object_deps:
* avoiding removing relocation dependencies of map by setting
l_reserved to 0 and otherwise processing the rest of the search
list.
* ensure that map remains at the beginning of l_initfini - the list
of things that need initialisation (and destruction). Do this by
splitting the copy up. This may not be required, but matches the
initialization order without dlopen.
Modify dl_open_worker to relocate the objects in new->l_inifini.
new->l_initfini is constructed in _dl_map_object_deps, and lists the
objects that need initialization and destruction. Originally the list
of objects in new->l_next are relocated. All of these objects should
also be included in new->l_initfini (both lists are populated with
dependencies in _dl_map_object_deps). We can't use new->l_prev to pick
up filtees, as during a recursive dlopen from an interposed malloc
call, l->prev can contain objects that are not ready for relocation.
Add tests to verify that symbols resolve to the filtee implementation
when auxiliary and filter objects are used, both as a normal link and
when dlopen'd.
Tested by running the testsuite on x86_64.
As noted in
<https://sourceware.org/ml/libc-alpha/2019-06/msg00824.html>,
elf/tst-rtld-preload fails when cross-testing because it attempts to
run the test wrapper with itself. Unfortunately, that thread never
resulted in a complete and correct patch for that test.
This patch addresses the issues with that test more thoroughly. The
test is changed not to use the wrapper twice, including updating the
message it prints about the command it runs to be more complete and
accurate after the change; the Makefile is changed not to pass the
redundant '$(test-wrapper)' argument.
Tested for Arm that this fixes the failure seen for that test in
cross-testing.
The tests elf/tst-ifunc-fault-bindnow and elf/tst-ifunc-fault-lazy
fail in cross-testing because they run the dynamic linker directly
without using the test wrapper. This patch fixes them to use the test
wrapper instead.
Tested that this fixes the failure of those two tests for powerpc
soft-float.
GCC 10.0 enabled -fno-common by default and this started to point that
__cache_line_size had been implemented in 2 different places: loader and
libc.
In order to avoid this duplication, the libc variable has been removed
and the loader variable is moved to rtld_global_ro.
File sysdeps/unix/sysv/linux/powerpc/dl-auxv.h has been added in order
to reuse code for both static and dynamic linking scenarios.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Without CET, a jump into a newly loaded object through an overwritten
link map often does not crash, it just executes some random code.
CET detects this in some cases because the function pointer does not
point to the start of a function in the replacement shared object,
so there is no ENDBR instruction.
The new test uses a small shared object and the existing dangling
link map to trigger the bug.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
We should clear GL(dl_initfirst) when freeing its link_map memory.
Tested on Fedora 31/x86-64 with CET.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
This new test was introduced with recent commit
591236f1a3.
If run on 32bit, it fails while renaming tst-ldconfig-ld-mod.so as there is no
/usr/lib64 directory. This patch is constructing the file name with help of
support_libdir_prefix.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Test ldconfig after /etc/ld.so.conf update and verify a running process
observes changes to /etc/ld.so.cache.
The test uses the test-in-container framework.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
This patch moves the vDSO setup from libc to loader code, just after
the vDSO link_map setup. For static case the initialization
is moved to _dl_non_dynamic_init instead.
Instead of using the mangled pointer, the vDSO data is set as
attribute_relro (on _rtld_global_ro for shared or _dl_vdso_* for
static). It is read-only even with partial relro.
It fixes BZ#24967 now that the vDSO pointer is setup earlier than
malloc interposition is called.
Also, vDSO calls should not be a problem for static dlopen as
indicated by BZ#20802. The vDSO pointer would be zero-initialized
and the syscall will be issued instead.
Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu,
arm-linux-gnueabihf, powerpc64le-linux-gnu, powerpc64-linux-gnu,
powerpc-linux-gnu, s390x-linux-gnu, sparc64-linux-gnu, and
sparcv9-linux-gnu. I also run some tests on mips.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The code is similar to the one at elf/dl-reloc.c, where it checks for
the l_relro_size from the link_map (obtained from PT_GNU_RELRO header
from program headers) and calls_dl_protected_relro.
For testing I will use the ones proposed by Florian's patch
'elf: Add tests for working RELRO protection' [1].
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
aarch64-linux-gnu, s390x-linux-gnu, and sparc64-linux-gnu. I also
check with --enable-static pie on x86_64-linux-gnu, i686-linux-gnu,
and aarch64-linux-gnu which seems the only architectures where
static PIE is actually working (as per 9d7a3741c9, on
arm-linux-gnueabihf, powerpc64{le}-linux-gnu, and s390x-linux-gnu
I am seeing runtime issues not related to my patch).
[1] https://sourceware.org/ml/libc-alpha/2019-10/msg00059.html
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
I've updated copyright dates in glibc for 2020. This is the patch for
the changes not generated by scripts/update-copyrights and subsequent
build / regeneration of generated files. As well as the usual annual
updates, mainly dates in --version output (minus libc.texinfo which
previously had to be handled manually but is now successfully updated
by update-copyrights), there is a fix to
sysdeps/unix/sysv/linux/powerpc/bits/termios-c_lflag.h where a typo in
the copyright notice meant it failed to be updated automatically.
Please remember to include 2020 in the dates for any new files added
in future (which means updating any existing uncommitted patches you
have that add new files to use the new copyright dates in them).
Previously, ld.so was invoked only with the elf subdirectory on the
library search path. Since the soname link for libc.so only exists in
the top-level build directory, this leaked the system libc into the
test.
Blocking signals causes issues with certain anti-malware solutions
which rely on an unblocked SIGSYS signal for system calls they
intercept.
This reverts commit a2e8aa0d9e
("Block signals during the initial part of dlopen") and adds
comments related to async signal safety to active_nodelete and
its caller.
Note that this does not make lazy binding async-signal-safe with regards
to dlopen. It merely avoids introducing new async-signal-safety hazards
as part of the NODELETE changes.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Commit a2e8aa0d9e ("Block signals during
the initial part of dlopen") was deemed necessary because of
read-modify-write operations like the one in add_dependency in
elf/dl-lookup.c. In the old code, we check for any kind of NODELETE
status and bail out:
/* Redo the NODELETE check, as when dl_load_lock wasn't held
yet this could have changed. */
if (map->l_nodelete != link_map_nodelete_inactive)
goto out;
And then set pending status (during relocation):
if (flags & DL_LOOKUP_FOR_RELOCATE)
map->l_nodelete = link_map_nodelete_pending;
else
map->l_nodelete = link_map_nodelete_active;
If a signal arrives during relocation and the signal handler, through
lazy binding, adds a global scope dependency on the same map, it will
set map->l_nodelete to link_map_nodelete_active. This will be
overwritten with link_map_nodelete_pending by the dlopen relocation
code.
To avoid such problems in relation to the l_nodelete member, this
commit introduces two flags for active NODELETE status (irrevocable)
and pending NODELETE status (revocable until activate_nodelete is
invoked). As a result, NODELETE processing in dlopen does not
introduce further reasons why lazy binding from signal handlers
is unsafe during dlopen, and a subsequent commit can remove signal
blocking from dlopen.
This does not address pre-existing issues (unrelated to the NODELETE
changes) which make lazy binding in a signal handler during dlopen
unsafe, such as the use of malloc in both cases.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The assumption behind the assert in activate_nodelete was wrong:
Inconsistency detected by ld.so: dl-open.c: 459: activate_nodelete:
Assertion `!imap->l_init_called || imap->l_type != lt_loaded' failed! (edit)
It can happen that an already-loaded object that is in the local
scope is promoted to NODELETE status, via binding to a unique
symbol.
Similarly, it is possible that such NODELETE promotion occurs to
an already-loaded object from the global scope. This is why the
loop in activate_nodelete has to cover all objects in the namespace
of the new object.
In do_lookup_unique, it could happen that the NODELETE status of
an already-loaded object was overwritten with a pending NODELETE
status. As a result, if dlopen fails, this could cause a loss of
the NODELETE status of the affected object, eventually resulting
in an incorrect unload.
Fixes commit f63b73814f ("Remove all
loaded objects if dlopen fails, ignoring NODELETE [BZ #20839]").
Since commit a3cc4f48e9 ("Remove
--as-needed configure test."), --as-needed support is no longer
optional.
The macros are not much shorter and do not provide documentary
value, either, so this commit removes them.
This commit adds missing skip_ifunc checks to aarch64, arm, i386,
sparc, and x86_64. A new test case ensures that IRELATIVE IFUNC
resolvers do not run in various diagnostic modes of the dynamic
loader.
Reviewed-By: Szabolcs Nagy <szabolcs.nagy@arm.com>
This reverts the non-test change from commit d0093c5cef
("Call _dl_open_check after relocation [BZ #24259]"), given that
the underlying bug has been fixed properly in commit 61b74477fa7f63
("Remove all loaded objects if dlopen fails, ignoring NODELETE
[BZ #20839]").
Tested on x86-64-linux-gnu, with and without --enable-cet.
Change-Id: I995a6cfb89f25d2b0cf5e606428c2a93eb48fc33
Lazy binding in a signal handler that interrupts a dlopen sees
intermediate dynamic linker state. This has likely been always
unsafe, but with the new pending NODELETE state, this is clearly
incorrect. Other threads are excluded via the loader lock, but the
current thread is not. Blocking signals until right before ELF
constructors run is the safe thing to do.
Change-Id: Iad079080ebe7442c13313ba11dc2797953faef35
This introduces a “pending NODELETE” state in the link map, which is
flipped to the persistent NODELETE state late in dlopen, via
activate_nodelete. During initial relocation, symbol binding
records pending NODELETE state only. dlclose ignores pending NODELETE
state. Taken together, this results that a partially completed dlopen
is rolled back completely because new NODELETE mappings are unloaded.
Tested on x86_64-linux-gnu and i386-linux-gnu.
Change-Id: Ib2a3d86af6f92d75baca65431d74783ee0dbc292
This change splits the scope and TLS slotinfo updates in dlopen into
two parts: one to resize the data structures, and one to actually apply
the update. The call to add_to_global_resize in dl_open_worker is moved
before the demarcation point at which no further memory allocations are
allowed.
_dl_add_to_slotinfo is adjusted to make the list update optional. There
is some optimization possibility here because we could grow the slotinfo
list of arrays in a single call, one the largest TLS modid is known.
This commit does not fix the fatal meory allocation failure in
_dl_update_slotinfo. Ideally, this error during dlopen should be
recoverable.
The update order of scopes and TLS data structures is retained, although
it appears to be more correct to fully initialize TLS first, and then
expose symbols in the newly loaded objects via the scope update.
Tested on x86_64-linux-gnu.
Change-Id: I240c58387dabda3ca1bcab48b02115175fa83d6c
The call to add_to_global in dl_open_worker happens after running ELF
constructors for new objects. At this point, proper recovery from
malloc failure would be quite complicated: We would have to run the
ELF destructors and close all opened objects, something that we
currently do not do.
Instead, this change splits add_to_global into two phases,
add_to_global_resize (which can raise an exception, called before ELF
constructors run), and add_to_global_update (which cannot, called
after ELF constructors). A complication arises due to recursive
dlopen: After the inner dlopen consumes some space, the pre-allocation
in the outer dlopen may no longer be sufficient. A new member in the
namespace structure, _ns_global_scope_pending_adds keeps track of the
maximum number of objects that need to be added to the global scope.
This enables the inner add_to_global_resize call to take into account
the needs of an outer dlopen.
Most code in the dynamic linker assumes that the number of global
scope entries fits into an unsigned int (matching the r_nlist member
of struct r_scop_elem). Therefore, change the type of
_ns_global_scope_alloc to unsigned int (from size_t), and add overflow
checks.
Change-Id: Ie08e2f318510d5a6a4bcb1c315f46791b5b77524
If a lazy binding failure happens during the execution of an ELF
constructor or destructor, the dynamic loader catches the error
and reports it using the dlerror mechanism. This is undesirable
because there could be other constructors and destructors that
need processing (which are skipped), and the process is in an
inconsistent state at this point. Therefore, we have to issue
a fatal dynamic loader error error and terminate the process.
Note that the _dl_catch_exception in _dl_open is just an inner catch,
to roll back some state locally. If called from dlopen, there is
still an outer catch, which is why calling _dl_init via call_dl_init
and a no-exception is required and cannot be avoiding by moving the
_dl_init call directly into _dl_open.
_dl_fini does not need changes because it does not install an error
handler, so errors are already fatal there.
Change-Id: I6b1addfe2e30f50a1781595f046f44173db9491a
Obtaining the link map is potentially very slow because it requires
iterating over all loaded objects in the current implementation. If
the caller supplied an explicit handle (i.e., not one of the RTLD_*
constants), the dlsym implementation does not need the identity of the
caller (except in the special case of auditing), so this change
avoids computing it in that case.
Even in the minimal case (dlsym called from a main program linked with
-dl), this shows a small speedup, perhaps around five percent. The
performance improvement can be arbitrarily large in principle (if
_dl_find_dso_for_object has to iterate over many link maps).
Change-Id: Ide5d9e2cc7ac25a0ffae8fb4c26def0c898efa29
In GCC 10, the default at -O2 is now -ftree-loop-distribute-patterns.
This optimization causes GCC to "helpfully" convert the hand-written
loop in _dl_start into a call to memset, which is not available that
early in program startup. Similar problems in other places in GLIBC
have been addressed by explicitly building with
-fno-tree-loop-distribute-patterns, but this one may have been
overlooked previously because it only affects targets where
HAVE_BUILTIN_MEMSET is not defined.
This patch fixes a bug observed on nios2-linux-gnu target that caused
all programs to segv on startup.
This will allow changes in dependency processing during non-lazy
binding, for more precise processing of NODELETE objects: During
initial relocation in dlopen, the fate of NODELETE objects is still
unclear, so objects which are depended upon by NODELETE objects
cannot immediately be marked as NODELETE.
Change-Id: Ic7b94a3f7c4719a00ca8e6018088567824da0658
In some cases, it is necessary to introduce noexcept regions
where raised dynamic loader exceptions (e.g., from lazy binding)
are fatal, despite being nested in a code region with an active
exception handler. This change enhances _dl_catch_exception with
to provide such a capability. The existing function is reused,
so that it is not necessary to introduce yet another function with
a similar purpose.
Change-Id: Iec1bf642ff95a349fdde8040e9baf851ac7b8904
To improve GCC 10 compatibility, it is necessary to remove the l_audit
zero-length array from the end of struct link_map. In preparation of
that, this commit introduces an accessor function for the audit state,
so that it is possible to change the representation of the audit state
without adjusting the code that accesses it.
Tested on x86_64-linux-gnu. Built on i686-gnu.
Change-Id: Id815673c29950fc011ae5301d7cde12624f658df
Only one of the currently defined flags is incompatible with versioned
symbol lookups, so it makes sense to check for that flag and not its
complement.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
Change-Id: I3384349cef90cfd91862ebc34a4053f0c0a99404
From the beginning, elf/tst-dlopen-aout has exercised two different
bugs: (a) failure to report errors for a dlopen of the executable
itself in some cases (bug 24900) and (b) incorrect rollback of the
TLS modid allocation in case of a dlopen failure (bug 16634).
This commit replaces the test with elf/tst-dlopen-self for (a) and
elf/tst-dlopen-tlsmodid for (b). The latter tests use the
elf/tst-dlopen-self binaries (or iconv) with dlopen, so they are
no longer self-dlopen tests.
Tested on x86_64-linux-gnu and i686-linux-gnu, with a toolchain that
does not default to PIE.
Commit a42faf59d6 ("Fix BZ #16634.")
attempted to fix a TLS modid consistency issue by adding additional
checks to the open_verify function. However, this is fragile
because open_verify cannot reliably predict whether
_dl_map_object_from_fd will later fail in the more complex cases
(such as memory allocation failures). Therefore, this commit
assigns the TLS modid as late as possible. At that point, the link
map pointer will eventually be passed to _dl_close, which will undo
the TLS modid assignment.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
If the loader is invoked explicitly and loads the main executable,
it stores the file ID of the main executable in l_file_id. This
information is not available if the main excutable is loaded by the
kernel, so this is another case where the two cases differ.
This enhances commit 23d2e5faf0
("elf: Self-dlopen failure with explict loader invocation
[BZ #24900]").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
The testcase forks a child process and runs pldd with PID of
this child. On systems where /proc/sys/kernel/yama/ptrace_scope
differs from zero, pldd will fail with
/usr/bin/pldd: cannot attach to process 3: Operation not permitted
This patch checks if ptrace_scope exists, is zero "classic ptrace permissions"
or one "restricted ptrace". If ptrace_scope exists and has a higher
restriction, then the test is marked as UNSUPPORTED.
The case "restricted ptrace" is handled by rearranging the processes involved
during the test. Now we have the following process tree:
-parent: do_test (performs output checks)
--subprocess 1: pldd_process (becomes pldd via execve)
---subprocess 2: target_process (ptraced via pldd)
ChangeLog:
* elf/tst-pldd.c (do_test): Add UNSUPPORTED check.
Rearrange subprocesses.
(pldd_process): New function.
* support/Makefile (libsupport-routines): Add support_ptrace.
* support/xptrace.h: New file.
* support/support_ptrace.c: Likewise.
This patch is a reimplementation of [1], which was submitted back in
2015. Copyright issue has been sorted [2] last year. It proposed a new
section (.gnu.xhash) and related dynamic tag (GT_GNU_XHASH). The new
section would be virtually identical to the existing .gnu.hash except
for the translation table (xlat) which would contain correct MIPS
.dynsym indexes corresponding to the hashvals in chains. This is because
MIPS ABI imposes a different ordering of the dynsyms than the one
expected by the .gnu.hash section. Another addition would be a leading
word at the beggining of the section, which would contain the number of
entries in the translation table.
In this patch, the new section name and dynamic tag are changed to
reflect the fact that the section should be treated as MIPS specific
(.MIPS.xhash and DT_MIPS_XHASH).
This patch addresses the alignment issue reported in [3] which is caused
by the leading word of the .MIPS.xhash section. Leading word is now
removed in the corresponding binutils patch, and the number of entries
in the translation table is computed using DT_MIPS_SYMTABNO dynamic tag.
Since the MIPS specific dl-lookup.c file was removed following the
initial patch submission, I opted for the definition of three new macros
in the generic ldsodefs.h. ELF_MACHINE_GNU_HASH_ADDRIDX defines the
index of the dynamic tag in the l_info array. ELF_MACHINE_HASH_SYMIDX is
used to calculate the index of a symbol in GNU hash. On MIPS, it is
defined to look up the symbol index in the translation table.
ELF_MACHINE_XHASH_SETUP is defined for MIPS only. It initializes the
.MIPS.xhash pointer in the link_map_machine struct.
The other major change is bumping the highest EI_ABIVERSION value for
MIPS to suggest that the dynamic linker now supports GNU hash.
The patch was tested by running the glibc testsuite for the three MIPS
ABIs (o32, n32 and n64) and for x86_64-linux-gnu.
[1] https://sourceware.org/ml/binutils/2015-10/msg00057.html
[2] https://sourceware.org/ml/binutils/2018-03/msg00025.html
[3] https://sourceware.org/ml/binutils/2016-01/msg00006.html
* elf/dl-addr.c (determine_info): Calculate the symbol index
using the newly defined ELF_MACHINE_HASH_SYMIDX macro.
* elf/dl-lookup.c (do_lookup_x): Ditto.
(_dl_setup_hash): Initialize MIPS xhash translation table.
* elf/elf.h (SHT_MIPS_XHASH): New define.
(DT_MIPS_XHASH): New define.
* sysdeps/generic/ldsodefs.h (ELF_MACHINE_GNU_HASH_ADDRIDX): New
define.
(ELF_MACHINE_HASH_SYMIDX): Ditto.
(ELF_MACHINE_XHASH_SETUP): Ditto.
* sysdeps/mips/ldsodefs.h (ELF_MACHINE_GNU_HASH_ADDRIDX): New
define.
(ELF_MACHINE_HASH_SYMIDX): Ditto.
(ELF_MACHINE_XHASH_SETUP): Ditto.
* sysdeps/mips/linkmap.h (struct link_map_machine): New member.
* sysdeps/unix/sysv/linux/mips/ldsodefs.h: Increment valid ABI
version.
* sysdeps/unix/sysv/linux/mips/libc-abis: New ABI version.
In case of an explicit loader invocation, ld.so essentially performs
a dlopen call to load the main executable. Since the pathname of
the executable is known at this point, it gets stored in the link
map. In regular mode, the pathname is not known and "" is used
instead.
As a result, if a program calls dlopen on the pathname of the main
program, the dlopen call succeeds and returns a handle for the main
map. This results in an unnecessary difference between glibc
testing (without --enable-hardcoded-path-in-tests) and production
usage.
This commit discards the names when building the link map in
_dl_new_object for the main executable, but it still determines
the origin at this point in case of an explict loader invocation.
The reason is that the specified pathname has to be used; the kernel
has a different notion of the main executable.
dlopen can no longer open PIE binaries, so it is not necessary
to link the executable as non-PIE to trigger a dlopen failure.
If we hard-code the path to the real executable, we can run the test
with and without hard-coded paths because the dlopen path will not
be recognized as the main program in both cases. (With an explict
loader invocation, the loader currently adds argv[0] to l_libname
for the main map and the dlopen call suceeds as a result; it does
not do that in standard mode.)
This change should be fully backwards-compatible because the old
code aborted the load if a soname mismatch was encountered
(instead of searching further for a matching symbol). This means
that no different symbols are found.
The soname check was explicitly disabled for the skip_map != NULL
case. However, this only happens with dl(v)sym and RTLD_NEXT,
and those lookups do not come with a verneed entry that could be used
for the check.
The error check was already explicitly disabled for the skip_map !=
NULL case, that is, when dl(v)sym was called with RTLD_NEXT. But
_dl_vsym always sets filename in the struct r_found_version argument
to NULL, so the check was not active anyway. This means that
symbol lookup results for the skip_map != NULL case do not change,
either.
STO_AARCH64_VARIANT_PCS is a non-visibility st_other flag for marking
symbols that reference functions that may follow a variant PCS with
different register usage convention from the base PCS.
DT_AARCH64_VARIANT_PCS is a dynamic tag that marks ELF modules that
have R_*_JUMP_SLOT relocations for symbols marked with
STO_AARCH64_VARIANT_PCS (i.e. have variant PCS calls via a PLT).
* elf/elf.h (STO_AARCH64_VARIANT_PCS): Define.
(DT_AARCH64_VARIANT_PCS): Define.
This test corrupts /var/cache/ldconfig/aux-cache and executes ldconfig
to check it will not segfault using the corrupted aux_cache. The test
uses the test-in-container framework. Verified no regressions on
x86_64.
This patch adds the new NT_ARM_PACA_KEYS and NT_ARM_PACG_KEYS from
Linux 5.1 to glibc's elf.h.
Tested for x86_64.
* elf/elf.h (NT_ARM_PACA_KEYS): New macro.
(NT_ARM_PACG_KEYS): Likewise.
Use a new libsupport support_bindir_prefix instead of a hardcoded
/usr/bin to create the pldd path on container directory.
Checked on x86_64-linux-gnu with default and non-default --prefix and
--bindir paths, as well with --enable-hardcoded-path-in-tests.
[BZ #24544]
* elf/tst-pldd.c (do_test): Use support_bindir_prefix instead of
pre-defined value.
Reviewed-by: DJ Delorie <dj@redhat.com>
The elf/tst-pldd (added by 1a4c27355e to fix BZ#18035) test does
not expect the hardcoded paths that are output by pldd when the test
is built with --enable-hardcoded-path-in-tests. Instead of showing
the ABI installed library names for loader and libc (such as
ld-linux-x86-64.so.2 and libc.so.6 for x86_64), pldd shows the default
built ld.so and libc.so.
It makes the tests fail with an invalid expected loader/libc name.
This patch fixes the elf-pldd test by adding the canonical ld.so and
libc.so names in the expected list of possible outputs when parsing
the result output from pldd. The test now handles both default
build and --enable-hardcoded-path-in-tests option.
Checked on x86_64-linux-gnu (built with and without
--enable-hardcoded-path-in-tests) and i686-linux-gnu.
* elf/tst-pldd.c (in_str_list): New function.
(do_test): Add default names for ld and libc as one option.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The audit module itself can be linked with BIND_NOW; it does not
affect its functionality.
This should complete the leftovers from commit
2d6ab5df3b ("Document and fix
--enable-bind-now [BZ #21015]").
Since 9182aa6799 (Fix vDSO l_name for GDB's, BZ#387) the initial link_map
for executable itself and loader will have both l_name and l_libname->name
holding the same value due:
elf/dl-object.c
95 new->l_name = *realname ? realname : (char *) newname->name + libname_len - 1;
Since newname->name points to new->l_libname->name.
This leads to pldd to an infinite call at:
elf/pldd-xx.c
203 again:
204 while (1)
205 {
206 ssize_t n = pread64 (memfd, tmpbuf.data, tmpbuf.length, name_offset);
228 /* Try the l_libname element. */
229 struct E(libname_list) ln;
230 if (pread64 (memfd, &ln, sizeof (ln), m.l_libname) == sizeof (ln))
231 {
232 name_offset = ln.name;
233 goto again;
234 }
Since the value at ln.name (l_libname->name) will be the same as previously
read. The straightforward fix is just avoid the check and read the new list
entry.
I checked also against binaries issues with old loaders with fix for BZ#387,
and pldd could dump the shared objects.
Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu, and
powerpc64le-linux-gnu.
[BZ #18035]
* elf/Makefile (tests-container): Add tst-pldd.
* elf/pldd-xx.c: Use _Static_assert in of pldd_assert.
(E(find_maps)): Avoid use alloca, use default read file operations
instead of explicit LFS names, and fix infinite loop.
* elf/pldd.c: Explicit set _FILE_OFFSET_BITS, cleanup headers.
(get_process_info): Use _Static_assert instead of assert, use default
directory operations instead of explicit LFS names, and free some
leadek pointers.
* elf/tst-pldd.c: New file.
This patch refactor how hp-timing is used on loader code for statistics
report. The HP_TIMING_AVAIL and HP_SMALL_TIMING_AVAIL are removed and
HP_TIMING_INLINE is used instead to check for hp-timing avaliability.
For alpha, which only defines HP_SMALL_TIMING_AVAIL, the HP_TIMING_INLINE
is set iff for IS_IN(rtld).
Checked on aarch64-linux-gnu, x86_64-linux-gnu, and i686-linux-gnu. I also
checked the builds for all afected ABIs.
* benchtests/bench-timing.h: Replace HP_TIMING_AVAIL with
HP_TIMING_INLINE.
* nptl/descr.h: Likewise.
* elf/rtld.c (RLTD_TIMING_DECLARE, RTLD_TIMING_NOW, RTLD_TIMING_DIFF,
RTLD_TIMING_ACCUM_NT, RTLD_TIMING_SET): Define.
(dl_start_final_info, _dl_start_final, dl_main, print_statistics):
Abstract hp-timing usage with RTLD_* macros.
* sysdeps/alpha/hp-timing.h (HP_TIMING_INLINE): Define iff IS_IN(rtld).
(HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL): Remove.
* sysdeps/generic/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL,
HP_TIMING_NONAVAIL): Likewise.
* sysdeps/ia64/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL):
Likewise.
* sysdeps/powerpc/powerpc32/power4/hp-timing.h (HP_TIMING_AVAIL,
HP_SMALL_TIMING_AVAIL): Likewise.
* sysdeps/powerpc/powerpc64/hp-timing.h (HP_TIMING_AVAIL,
HP_SMALL_TIMING_AVAIL): Likewise.
* sysdeps/sparc/sparc32/sparcv9/hp-timing.h (HP_TIMING_AVAIL,
HP_SMALL_TIMING_AVAIL): Likewise.
* sysdeps/sparc/sparc64/hp-timing.h (HP_TIMING_AVAIL,
HP_SMALL_TIMING_AVAIL): Likewise.
* sysdeps/x86/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL):
Likewise.
* sysdeps/generic/hp-timing-common.h: Update comment with
HP_TIMING_AVAIL removal.
This patch removes CLOCK_THREAD_CPUTIME_ID and CLOCK_PROCESS_CPUTIME_ID support
from clock_gettime and clock_settime generic implementation. For Linux, kernel
already provides supports through the syscall and Hurd HTL lacks
__pthread_clock_gettime and __pthread_clock_settime internal implementation.
As described in clock_gettime man-page [1] on 'Historical note for SMP
system', implementing CLOCK_{THREAD,PROCESS}_CPUTIME_ID with timer registers
is error-prone and susceptible to timing and accurary issues that the libc
can not deal without kernel support.
This allows removes unused code which, however, still incur in some runtime
overhead in thread creation (the struct pthread cpuclock_offset
initialization).
If hurd eventually wants to support them it should either either implement as
a kernel facility (or something related due its architecture) or in system
specific implementation.
Checked on aarch64-linux-gnu, x86_64-linux-gnu, and i686-linux-gnu. I also
checked on a i686-gnu build.
* nptl/Makefile (libpthread-routines): Remove pthread_clock_gettime and
pthread_clock_settime.
* nptl/pthreadP.h (__find_thread_by_id): Remove prototype.
* elf/dl-support.c [!HP_TIMING_NOAVAIL] (_dl_cpuclock_offset): Remove.
(_dl_non_dynamic_init): Remove _dl_cpuclock_offset setting.
* elf/rtld.c (_dl_start_final): Likewise.
* nptl/allocatestack.c (__find_thread_by_id): Remove function.
* sysdeps/generic/ldsodefs.h [!HP_TIMING_NOAVAIL] (_dl_cpuclock_offset):
Remove.
* sysdeps/mach/hurd/dl-sysdep.c [!HP_TIMING_NOAVAIL]
(_dl_cpuclock_offset): Remove.
* nptl/descr.h (struct pthread): Rename cpuclock_offset to
cpuclock_offset_ununsed.
* nptl/nptl-init.c (__pthread_initialize_minimal_internal): Remove
cpuclock_offset set.
* nptl/pthread_create.c (START_THREAD_DEFN): Likewise.
* sysdeps/nptl/fork.c (__libc_fork): Likewise.
* nptl/pthread_clock_gettime.c: Remove file.
* nptl/pthread_clock_settime.c: Likewise.
* sysdeps/unix/clock_gettime.c (hp_timing_gettime): Remove function.
[HP_TIMING_AVAIL] (realtime_gettime): Remove CLOCK_THREAD_CPUTIME_ID
and CLOCK_PROCESS_CPUTIME_ID support.
* sysdeps/unix/clock_settime.c (hp_timing_gettime): Likewise.
[HP_TIMING_AVAIL] (realtime_gettime): Likewise.
* sysdeps/posix/clock_getres.c (hp_timing_getres): Likewise.
[HP_TIMING_AVAIL] (__clock_getres): Likewise.
* sysdeps/unix/clock_nanosleep.c (CPUCLOCK_P, INVALID_CLOCK_P):
Likewise.
(__clock_nanosleep): Remove CPUCLOCK_P and INVALID_CLOCK_P usage.
[1] http://man7.org/linux/man-pages/man2/clock_gettime.2.html
Starting with commit 1616d034b6
the output was corrupted on some platforms as _dl_procinfo
was called for every auxv entry and on some architectures like s390
all entries were represented as "AT_HWCAP".
This patch is removing the condition and let _dl_procinfo decide if
an entry is printed in a platform specific or generic way.
This patch also adjusts all _dl_procinfo implementations which assumed
that they are only called for AT_HWCAP or AT_HWCAP2. They are now just
returning a non-zero-value for entries which are not handled platform
specifc.
ChangeLog:
* elf/dl-sysdep.c (_dl_show_auxv): Remove condition and always
call _dl_procinfo.
* sysdeps/unix/sysv/linux/s390/dl-procinfo.h (_dl_procinfo):
Ignore types other than AT_HWCAP.
* sysdeps/sparc/dl-procinfo.h (_dl_procinfo): Likewise.
* sysdeps/unix/sysv/linux/i386/dl-procinfo.h (_dl_procinfo):
Likewise.
* sysdeps/powerpc/dl-procinfo.h (_dl_procinfo): Adjust comment
in the case of falling back to generic output mechanism.
* sysdeps/unix/sysv/linux/arm/dl-procinfo.h (_dl_procinfo):
Likewise.
This patch adds some defines relate to machine flag and section information,
which is used by elfutils elflint check. A C-SKY typo is also fixed with
this patch.
* elf/elf.h (EF_CSKY_ABIMASK, EF_CSKY_OTHER, EF_CSKY_PROCESSOR)
(EF_CSKY_ABIV1, EF_CSKY_ABIV2, SHT_CSKY_ATTRIBUTES): New defines.
It is possible that the link editor injects an allocated ABI tag note
before the artificial, allocated large note in the test. Note parsing
in open_verify stops when the first ABI tag note is encountered, so if
the ABI tag note comes first, the problematic code is not actually
exercised.
Also tweak the artificial note so that it is a syntactically valid
4-byte aligned note, in case the link editor tries to parse notes and
process them.
Improves the testing part of commit 0065aaaaae.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The existing tests all use global symbols (but with different
visibility). Local symbols could be treated differently by the
compiler and linker (as was the case on POWER ELFv2, causing
bug 23937), and we did not have test coverage for this.
Tested on x86-64 and POWER ELFv2 little-endian, with and without
--disable-multi-arch. On POWER, the test cases elf/ifuncmain9,
elf/ifuncmain9pic, elf/ifuncmain9pie reproduce bug 23937 with older
binutils.
We should run IFUNC tests with --disable-multi-arch if the toolchain
supports IFUNCs. For correctness, --disable-multi-arch must not
remove IFUNC support from the loader.
Tested on x86-64, x32 and i686 with and without --disable-multi-arch.
* configure.ac (have-ifunc): New LIBC_CONFIG_VAR.
* configure: Regenerated.
* elf/Makefile: Run IFUNC tests if binutils supports IFUNC.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
The clone.S patch fixes 2 elfutils testsuite unwind failures, where the
backtrace gets stuck repeating __thread_start until we hit the backtrace
limit. This was confirmed by building and installing a patched glibc and
then building elfutils and running its testsuite.
Unfortunately, the testcase isn't working as expected and I don't know why.
The testcase passes even when my clone.S patch is not installed. The testcase
looks logically similarly to the elfutils testcases that are failing. Maybe
there is a subtle difference in how the glibc unwinding works versus the
elfutils unwinding? I don't have good gdb pthread support yet, so I haven't
found a way to debug this. Anyways, I don't know if the testcase is useful or
not. If the testcase isn't useful then maybe the clone.S patch is OK without
a testcase?
Jim
[BZ #24040]
* elf/Makefile (CFLAGS-tst-unwind-main.c): Add -DUSE_PTHREADS=0.
* elf/tst-unwind-main.c: If USE_PTHEADS, include pthread.h and error.h
(func): New.
(main): If USE_PTHREADS, call pthread_create to run func. Otherwise
call func directly.
* nptl/Makefile (tests): Add tst-unwind-thread.
(CFLAGS-tst-unwind-thread.c): Define.
* nptl/tst-unwind-thread.c: New file.
* sysdeps/unix/sysv/linux/riscv/clone.S (__thread_start): Mark ra
as undefined.
This change moves the audit module loading and early notification into
separate functions out of dl_main.
It restores the bug fix from commit
8e889c5da3 ("elf: Fix LD_AUDIT for
modules with invalid version (BZ#24122)") which was reverted in commit
83e6b59625 ("[elf] Revert 8e889c5da3
(BZ#24122)").
The actual bug fix is the separate error message for the case when
la_version returns zero. The dynamic linker error message (which is
NULL in this case) is no longer used. Based on the intended use of
version zero (ignore this module due to explicit request), the message
is only printed if debugging is enabled.
This patch adds fall-through comments in some cases where -Wextra
produces implicit-fallthrough warnings.
The patch is non-exhaustive. Apart from architecture-specific code
for non-x86_64 architectures, it does not change sunrpc/xdr.c (legacy
code, probably should have such changes, but left to be dealt with
separately), or places that already had comments about the
fall-through but not matching the form expected by
-Wimplicit-fallthrough=3 (the default level with -Wextra; my
inclination is to adjust those comments to match rather than
downgrading to -Wimplicit-fallthrough=1 to allow any comment), or one
place where I thought the implicit fallthrough was not correct and so
should be handled separately as a bug fix. I think the key thing to
consider in review of this patch is whether the fall-through is indeed
intended and correct in each place where such a comment is added.
Tested for x86_64.
* elf/dl-exception.c (_dl_exception_create_format): Add
fall-through comments.
* elf/ldconfig.c (parse_conf_include): Likewise.
* elf/rtld.c (print_statistics): Likewise.
* locale/programs/charmap.c (parse_charmap): Likewise.
* misc/mntent_r.c (__getmntent_r): Likewise.
* posix/wordexp.c (parse_arith): Likewise.
(parse_backtick): Likewise.
* resolv/ns_ttl.c (ns_parse_ttl): Likewise.
* sysdeps/x86/cpu-features.c (init_cpu_features): Likewise.
* sysdeps/x86_64/dl-machine.h (elf_machine_rela): Likewise.
One group of warnings seen with -Wextra is warnings for static or
inline not at the start of a declaration (-Wold-style-declaration).
This patch fixes various such cases for inline, ensuring it comes at
the start of the declaration (after any static). A common case of the
fix is "static inline <type> __always_inline"; the definition of
__always_inline starts with __inline, so the natural change is to
"static __always_inline <type>". Other cases of the warning may be
harder to fix (one pattern is a function definition that gets
rewritten to be static by an including file, "#define funcname static
wrapped_funcname" or similar), but it seems worth fixing these cases
with inline anyway.
Tested for x86_64.
* elf/dl-load.h (_dl_postprocess_loadcmd): Use __always_inline
before return type, without separate inline.
* elf/dl-tunables.c (maybe_enable_malloc_check): Likewise.
* elf/dl-tunables.h (tunable_is_name): Likewise.
* malloc/malloc.c (do_set_trim_threshold): Likewise.
(do_set_top_pad): Likewise.
(do_set_mmap_threshold): Likewise.
(do_set_mmaps_max): Likewise.
(do_set_mallopt_check): Likewise.
(do_set_perturb_byte): Likewise.
(do_set_arena_test): Likewise.
(do_set_arena_max): Likewise.
(do_set_tcache_max): Likewise.
(do_set_tcache_count): Likewise.
(do_set_tcache_unsorted_limit): Likewise.
* nis/nis_subr.c (count_dots): Likewise.
* nptl/allocatestack.c (advise_stack_range): Likewise.
* sysdeps/ieee754/dbl-64/s_sin.c (do_cos): Likewise.
(do_sin): Likewise.
(reduce_sincos): Likewise.
(do_sincos): Likewise.
* sysdeps/unix/sysv/linux/x86/elision-conf.c
(do_set_elision_enable): Likewise.
(TUNABLE_CALLBACK_FNDECL): Likewise.
Add support for AT_L1I_CACHESIZE, AT_L1I_CACHEGEOMETRY,
AT_L1D_CACHESIZE, AT_L1D_CACHEGEOMETRY, AT_L2_CACHESIZE,
AT_L2_CACHEGEOMETRY, AT_L3_CACHESIZE and AT_L3_CACHEGEOMETRY when
LD_SHOW_AUXV=1.
AT_L*_CACHESIZE is printed as decimal and represent the number of
bytes of the cache.
AT_L*_CACHEGEOMETRY is treated in order to specify the cache line size
and its associativity.
Example output from a POWER8:
AT_L1I_CACHESIZE: 32768
AT_L1I_CACHEGEOMETRY: 128B line size, 8-way set associative
AT_L1D_CACHESIZE: 65536
AT_L1D_CACHEGEOMETRY: 128B line size, 8-way set associative
AT_L2_CACHESIZE: 524288
AT_L2_CACHEGEOMETRY: 128B line size, 8-way set associative
AT_L3_CACHESIZE: 8388608
AT_L3_CACHEGEOMETRY: 128B line size, 8-way set associative
Some of the new types are longer than the previous ones, requiring to
increase the indentation in order to keep the values aligned.
* elf/dl-sysdep.c (auxvars): Add AT_L1I_CACHESIZE,
AT_L1I_CACHEGEOMETRY, AT_L1D_CACHESIZE, AT_L1D_CACHEGEOMETRY,
AT_L2_CACHESIZE, AT_L2_CACHEGEOMETRY, AT_L3_CACHESIZE and
AT_L3_CACHEGEOMETRY. Fix indentation when printing the other
fields.
(_dl_show_auxv): Give a special treatment to
AT_L1I_CACHEGEOMETRY, AT_L1D_CACHEGEOMETRY, AT_L2_CACHEGEOMETRY
and AT_L3_CACHEGEOMETRY.
* sysdeps/powerpc/dl-procinfo.h (cache_geometry): New function.
(_dl_procinfo): Fix indentation when printing AT_HWCAP and
AT_HWCAP2. Add support for AT_L1I_CACHEGEOMETRY,
AT_L1D_CACHEGEOMETRY, AT_L2_CACHEGEOMETRY and AT_L3_CACHEGEOMETRY.
Signed-off-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
There is a data-dependency between the fields of struct l_reloc_result
and the field used as the initialization guard. Users of the guard
expect writes to the structure to be observable when they also observe
the guard initialized. The solution for this problem is to use an acquire
and release load and store to ensure previous writes to the structure are
observable if the guard is initialized.
The previous implementation used DL_FIXUP_VALUE_ADDR (l_reloc_result->addr)
as the initialization guard, making it impossible for some architectures
to load and store it atomically, i.e. hppa and ia64, due to its larger size.
This commit adds an unsigned int to l_reloc_result to be used as the new
initialization guard of the struct, making it possible to load and store
it atomically in all architectures. The fix ensures that the values
observed in l_reloc_result are consistent and do not lead to crashes.
The algorithm is documented in the code in elf/dl-runtime.c
(_dl_profile_fixup). Not all data races have been eliminated.
Tested with build-many-glibcs and on powerpc, powerpc64, and powerpc64le.
[BZ #23690]
* elf/dl-runtime.c (_dl_profile_fixup): Guarantee memory
modification order when accessing reloc_result->addr.
* include/link.h (reloc_result): Add field init.
* nptl/Makefile (tests): Add tst-audit-threads.
(modules-names): Add tst-audit-threads-mod1 and
tst-audit-threads-mod2.
Add rules to build tst-audit-threads.
* nptl/tst-audit-threads-mod1.c: New file.
* nptl/tst-audit-threads-mod2.c: Likewise.
* nptl/tst-audit-threads.c: Likewise.
* nptl/tst-audit-threads.h: Likewise.
Signed-off-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Add support for %x, %lx and %zx to _dl_exception_create_format and pad
to the full width with 0.
* elf/Makefile (tests-internal): Add tst-create_format1.
* elf/dl-exception.c (_dl_exception_create_format): Support
%x, %lx and %zx.
* elf/tst-create_format1.c: New file.
Mark the ra register as undefined in _start, so that unwinding through
main works correctly. Also, don't use a tail call so that ra points after
the call to __libc_start_main, not after the previous call.
This patch adds NT_MIPS_DSP and NT_MIPS_FP_MODE from Linux 4.19 to
elf.h.
Tested for x86_64.
* elf/elf.h (NT_MIPS_DSP): New macro.
(NT_MIPS_FP_MODE): Likewise.
Currently, DT_TEXTREL is incompatible with IFUNC. When DT_TEXTREL or
DF_TEXTREL is seen, the dynamic linker calls __mprotect on the segments
with PROT_READ|PROT_WRITE before applying dynamic relocations. It leads
to segfault when performing IFUNC resolution (which requires PROT_EXEC
as well for the IFUNC resolver).
This patch makes it call __mprotect with extra PROT_WRITE bit, which
will keep the PROT_EXEC bit if exists, and thus fixes the segfault.
FreeBSD rtld libexec/rtld-elf/rtld.c (reloc_textrel_prot) does the same.
Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu,
sparc64-linux-gnu, sparcv9-linux-gnu, and armv8-linux-gnueabihf.
Adam J. Richte <adam_richter2004@yahoo.com>
Adhemerval Zanella <adhemerval.zanella@linaro.org>
Fangrui Song <maskray@google.com>
[BZ #20480]
* config.h.in (CAN_TEXTREL_IFUNC): New define.
* configure.ac: Add check if linker supports textrel relocation with
ifunc.
* elf/dl-reloc.c (_dl_relocate_object): Use all required flags on
DT_TEXTREL segments, not only PROT_READ and PROT_WRITE.
* elf/Makefile (ifunc-pie-tests): Add tst-ifunc-textrel.
(CFLAGS-tst-ifunc-textrel.c): New rule.
* elf/tst-ifunc-textrel.c: New file.
I'm testing a patch to let the compiler expand calls to floor in libm
as built-in function calls as much as possible, instead of calling
__floor, so that no architecture-specific __floor inlines are needed,
and then to arrange for non-inlined calls to end up calling __floor,
as done with sqrt and __ieee754_sqrt.
This shows up elf/tst-relsort1mod2.c calling floor, which must not be
converted to a call to __floor. Now, while an IS_IN (libm)
conditional could be added to the existing conditionals on such
redirections in include/math.h, the _ISOMAC conditional ought to
suffice (code in other glibc libraries shouldn't be calling floor or
sqrt anyway, as they aren't provided in libc and the other libraries
don't link with libm). But while tests are mostly now built with
_ISOMAC defined, test modules in modules-names aren't unless also
listed in modules-names-tests.
As far as I can see, all the modules in modules-names in elf/ are in
fact parts of tests and so listing them in modules-names-tests is
appropriate, so they get built with something closer to the headers
used for user code, except in a few cases that actually rely on
something from internal headers. This patch duly sets
modules-names-tests there accordingly (filtering out those tests that
fail to build without internal headers).
Tested for x86_64, and with build-many-glibcs.py.
* elf/Makefile (modules-names-tests): New variable.
The elf/tst-dlopen-aout.c test uses asserts to verify properties of the
test execution. Instead of using assert it should use xpthread_create
and xpthread_join to catch errors starting the threads and fail the
test. This shows up in Fedora 28 when building for i686-pc-linux-gnu
and using gcc 8.1.1.
Tested on i686, and fixes a check failure with -DNDEBUG.
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
This patch adds two new constants from Linux 4.18 to elf.h,
NT_VMCOREDD and AT_MINSIGSTKSZ.
Tested for x86_64.
* elf/elf.c (NT_VMCOREDD): New macro.
(AT_MINSIGSTKSZ): Likewise.
The glibc.tune namespace is vaguely named since it is a 'tunable', so
give it a more specific name that describes what it refers to. Rename
the tunable namespace to 'cpu' to more accurately reflect what it
encompasses. Also rename glibc.tune.cpu to glibc.cpu.name since
glibc.cpu.cpu is weird.
* NEWS: Mention the change.
* elf/dl-tunables.list: Rename tune namespace to cpu.
* sysdeps/powerpc/dl-tunables.list: Likewise.
* sysdeps/x86/dl-tunables.list: Likewise.
* sysdeps/aarch64/dl-tunables.list: Rename tune.cpu to
cpu.name.
* elf/dl-hwcaps.c (_dl_important_hwcaps): Adjust.
* elf/dl-hwcaps.h (GET_HWCAP_MASK): Likewise.
* manual/README.tunables: Likewise.
* manual/tunables.texi: Likewise.
* sysdeps/powerpc/cpu-features.c: Likewise.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.c
(init_cpu_features): Likewise.
* sysdeps/x86/cpu-features.c: Likewise.
* sysdeps/x86/cpu-features.h: Likewise.
* sysdeps/x86/cpu-tunables.c: Likewise.
* sysdeps/x86_64/Makefile: Likewise.
* sysdeps/x86/dl-cet.c: Likewise.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* scripts/check-execstack.awk: Consider `xfail' variable containing a
list
of libraries whose stack executability is expected.
* elf/Makefile ($(objpfx)check-execstack.out): Pass
$(check-execstack-xfail) to check-execstack.awk through `xfail'
variable.
* sysdeps/mach/hurd/i386/Makefile (check-execstack-xfail): Set to ld.so
libc.so libpthread.so.
Intel Control-flow Enforcement Technology (CET) instructions:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-en
forcement-technology-preview.pdf
includes Indirect Branch Tracking (IBT) and Shadow Stack (SHSTK).
GNU_PROPERTY_X86_FEATURE_1_IBT is added to GNU program property to
indicate that all executable sections are compatible with IBT when
ENDBR instruction starts each valid target where an indirect branch
instruction can land. Linker sets GNU_PROPERTY_X86_FEATURE_1_IBT on
output only if it is set on all relocatable inputs.
On an IBT capable processor, the following steps should be taken:
1. When loading an executable without an interpreter, enable IBT and
lock IBT if GNU_PROPERTY_X86_FEATURE_1_IBT is set on the executable.
2. When loading an executable with an interpreter, enable IBT if
GNU_PROPERTY_X86_FEATURE_1_IBT is set on the interpreter.
a. If GNU_PROPERTY_X86_FEATURE_1_IBT isn't set on the executable,
disable IBT.
b. Lock IBT.
3. If IBT is enabled, when loading a shared object without
GNU_PROPERTY_X86_FEATURE_1_IBT:
a. If legacy interwork is allowed, then mark all pages in executable
PT_LOAD segments in legacy code page bitmap. Failure of legacy code
page bitmap allocation causes an error.
b. If legacy interwork isn't allowed, it causes an error.
GNU_PROPERTY_X86_FEATURE_1_SHSTK is added to GNU program property to
indicate that all executable sections are compatible with SHSTK where
return address popped from shadow stack always matches return address
popped from normal stack. Linker sets GNU_PROPERTY_X86_FEATURE_1_SHSTK
on output only if it is set on all relocatable inputs.
On a SHSTK capable processor, the following steps should be taken:
1. When loading an executable without an interpreter, enable SHSTK if
GNU_PROPERTY_X86_FEATURE_1_SHSTK is set on the executable.
2. When loading an executable with an interpreter, enable SHSTK if
GNU_PROPERTY_X86_FEATURE_1_SHSTK is set on interpreter.
a. If GNU_PROPERTY_X86_FEATURE_1_SHSTK isn't set on the executable
or any shared objects loaded via the DT_NEEDED tag, disable SHSTK.
b. Otherwise lock SHSTK.
3. After SHSTK is enabled, it is an error to load a shared object
without GNU_PROPERTY_X86_FEATURE_1_SHSTK.
To enable CET support in glibc, --enable-cet is required to configure
glibc. When CET is enabled, both compiler and assembler must support
CET. Otherwise, it is a configure-time error.
To support CET run-time control,
1. _dl_x86_feature_1 is added to the writable ld.so namespace to indicate
if IBT or SHSTK are enabled at run-time. It should be initialized by
init_cpu_features.
2. For dynamic executables:
a. A l_cet field is added to struct link_map to indicate if IBT or
SHSTK is enabled in an ELF module. _dl_process_pt_note or
_rtld_process_pt_note is called to process PT_NOTE segment for
GNU program property and set l_cet.
b. _dl_open_check is added to check IBT and SHSTK compatibilty when
dlopening a shared object.
3. Replace i386 _dl_runtime_resolve and _dl_runtime_profile with
_dl_runtime_resolve_shstk and _dl_runtime_profile_shstk, respectively if
SHSTK is enabled.
CET run-time control can be changed via GLIBC_TUNABLES with
$ export GLIBC_TUNABLES=glibc.tune.x86_shstk=[permissive|on|off]
$ export GLIBC_TUNABLES=glibc.tune.x86_ibt=[permissive|on|off]
1. permissive: SHSTK is disabled when dlopening a legacy ELF module.
2. on: IBT or SHSTK are always enabled, regardless if there are IBT or
SHSTK bits in GNU program property.
3. off: IBT or SHSTK are always disabled, regardless if there are IBT or
SHSTK bits in GNU program property.
<cet.h> from CET-enabled GCC is automatically included by assembly codes
to add GNU_PROPERTY_X86_FEATURE_1_IBT and GNU_PROPERTY_X86_FEATURE_1_SHSTK
to GNU program property. _CET_ENDBR is added at the entrance of all
assembly functions whose address may be taken. _CET_NOTRACK is used to
insert NOTRACK prefix with indirect jump table to support IBT. It is
defined as notrack when _CET_NOTRACK is defined in <cet.h>.
[BZ #21598]
* configure.ac: Add --enable-cet.
* configure: Regenerated.
* elf/Makefille (all-built-dso): Add a comment.
* elf/dl-load.c (filebuf): Moved before "dynamic-link.h".
Include <dl-prop.h>.
(_dl_map_object_from_fd): Call _dl_process_pt_note on PT_NOTE
segment.
* elf/dl-open.c: Include <dl-prop.h>.
(dl_open_worker): Call _dl_open_check.
* elf/rtld.c: Include <dl-prop.h>.
(dl_main): Call _rtld_process_pt_note on PT_NOTE segment. Call
_rtld_main_check.
* sysdeps/generic/dl-prop.h: New file.
* sysdeps/i386/dl-cet.c: Likewise.
* sysdeps/unix/sysv/linux/x86/cpu-features.c: Likewise.
* sysdeps/unix/sysv/linux/x86/dl-cet.h: Likewise.
* sysdeps/x86/cet-tunables.h: Likewise.
* sysdeps/x86/check-cet.awk: Likewise.
* sysdeps/x86/configure: Likewise.
* sysdeps/x86/configure.ac: Likewise.
* sysdeps/x86/dl-cet.c: Likewise.
* sysdeps/x86/dl-procruntime.c: Likewise.
* sysdeps/x86/dl-prop.h: Likewise.
* sysdeps/x86/libc-start.h: Likewise.
* sysdeps/x86/link_map.h: Likewise.
* sysdeps/i386/dl-trampoline.S (_dl_runtime_resolve): Add
_CET_ENDBR.
(_dl_runtime_profile): Likewise.
(_dl_runtime_resolve_shstk): New.
(_dl_runtime_profile_shstk): Likewise.
* sysdeps/linux/x86/Makefile (sysdep-dl-routines): Add dl-cet
if CET is enabled.
(CFLAGS-.o): Add -fcf-protection if CET is enabled.
(CFLAGS-.os): Likewise.
(CFLAGS-.op): Likewise.
(CFLAGS-.oS): Likewise.
(asm-CPPFLAGS): Add -fcf-protection -include cet.h if CET
is enabled.
(tests-special): Add $(objpfx)check-cet.out.
(cet-built-dso): New.
(+$(cet-built-dso:=.note)): Likewise.
(common-generated): Add $(cet-built-dso:$(common-objpfx)%=%.note).
($(objpfx)check-cet.out): New.
(generated): Add check-cet.out.
* sysdeps/x86/cpu-features.c: Include <dl-cet.h> and
<cet-tunables.h>.
(TUNABLE_CALLBACK (set_x86_ibt)): New prototype.
(TUNABLE_CALLBACK (set_x86_shstk)): Likewise.
(init_cpu_features): Call get_cet_status to check CET status
and update dl_x86_feature_1 with CET status. Call
TUNABLE_CALLBACK (set_x86_ibt) and TUNABLE_CALLBACK
(set_x86_shstk). Disable and lock CET in libc.a.
* sysdeps/x86/cpu-tunables.c: Include <cet-tunables.h>.
(TUNABLE_CALLBACK (set_x86_ibt)): New function.
(TUNABLE_CALLBACK (set_x86_shstk)): Likewise.
* sysdeps/x86/sysdep.h (_CET_NOTRACK): New.
(_CET_ENDBR): Define if not defined.
(ENTRY): Add _CET_ENDBR.
* sysdeps/x86/dl-tunables.list (glibc.tune): Add x86_ibt and
x86_shstk.
* sysdeps/x86_64/dl-trampoline.h (_dl_runtime_resolve): Add
_CET_ENDBR.
(_dl_runtime_profile): Likewise.
We have this condition in `check_match' (in elf/dl-lookup.c):
if (__glibc_unlikely ((sym->st_value == 0 /* No value. */
&& stt != STT_TLS)
|| ELF_MACHINE_SYM_NO_MATCH (sym)
|| (type_class & (sym->st_shndx == SHN_UNDEF))))
return NULL;
which causes all !STT_TLS symbols whose value is zero to be silently
ignored in lookup. This may make sense for regular symbols, however not
for absolute (SHN_ABS) ones, where zero is like any value, there's no
special meaning attached to it.
Consequently legitimate programs fail, for example taking the
`elf/tst-absolute-sym' test case, substituting 0 for 0x55aa in
`elf/tst-absolute-sym-lib.lds' and then trying to run the resulting
program we get this:
$ .../elf/tst-absolute-sym
.../elf/tst-absolute-sym: symbol lookup error: .../elf/tst-absolute-sym-lib.so: undefined symbol: absolute
$
even though the symbol clearly is there:
$ readelf --dyn-syms .../elf/tst-absolute-sym-lib.so | grep '\babsolute\b'
7: 00000000 0 NOTYPE GLOBAL DEFAULT ABS absolute
$
The check for the zero value has been there since forever or commit
d66e34cd4234/08162fa88891 ("Implemented runtime dynamic linker to
support ELF shared libraries.") dating back to May 2nd 1995, and the
problem triggers regardless of commit e7feec374c ("elf: Correct
absolute (SHN_ABS) symbol run-time calculation [BZ #19818]") being
present or not.
Fix the issue then, by permitting `sym->st_value' to be 0 for SHN_ABS
symbols in lookup.
[BZ #23307]
* elf/dl-lookup.c (check_match): Do not reject a symbol whose
`st_value' is 0 if `st_shndx' is SHN_ABS.
* elf/tst-absolute-zero.c: New file.
* elf/tst-absolute-zero-lib.c: New file.
* elf/tst-absolute-zero-lib.lds: New file.
* elf/Makefile (tests): Add `tst-absolute-zero'.
(modules-names): Add `tst-absolute-zero-lib'.
(LDLIBS-tst-absolute-zero-lib.so): New variable.
($(objpfx)tst-absolute-zero-lib.so): New dependency.
($(objpfx)tst-absolute-zero: New dependency.
Some Linux distributions are experimenting with a new, separately
maintained and hopefully more agile implementation of the crypt
API. To facilitate this, add a configure option which disables
glibc's embedded libcrypt. When this option is given, libcrypt.*
and crypt.h will not be built nor installed.
