Further optimize integer memcpy. Small cases now include copies up
to 32 bytes. 64-128 byte copies are split into two cases to improve
performance of 64-96 byte copies. Comments have been rewritten.
(cherry picked from commit 7000651327)
On some microarchitectures performance of the backwards memmove improves if
the stores use STR with decreasing addresses. So change the memmove loop
in memcpy_advsimd.S to use 2x STR rather than STP.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit bd394d131c)
Add a new memcpy using 128-bit Q registers - this is faster on modern
cores and reduces codesize. Similar to the generic memcpy, small cases
include copies up to 32 bytes. 64-128 byte copies are split into two
cases to improve performance of 64-96 byte copies. Large copies align
the source rather than the destination.
bench-memcpy-random is ~9% faster than memcpy_falkor on Neoverse N1,
so make this memcpy the default on N1 (on Centriq it is 15% faster than
memcpy_falkor).
Passes GLIBC regression tests.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
(cherry picked from commit 4a733bf375)
Given almost all uses of ENTRY are for string/memory functions,
align ENTRY to a cacheline to simplify things.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 34f0d01d5e)
Commit 91927b7c76 (Rewrite iconv option parsing [BZ #19519]) did not
handle cases where the output codeset for translations (via the `gettext'
family of functions) might have a caller specified encoding suffix such as
TRANSLIT or IGNORE. This led to a regression where translations did not
work when the codeset had a suffix.
This commit fixes the above issue by parsing any suffixes passed to
__dcigettext and adds two new test-cases to intl/tst-codeset.c to
verify correct behaviour. The iconv-internal function __gconv_create_spec
and the static iconv-internal function gconv_destroy_spec are now visible
internally within glibc and used in intl/dcigettext.c.
(cherry picked from commit 7d4ec75e11)
This commit replaces string manipulation during `iconv_open' and iconv_prog
option parsing with a structured, flag based conversion specification. In
doing so, it alters the internal `__gconv_open' interface and accordingly
adjusts its uses.
This change fixes several hangs in the iconv program and therefore includes
a new test to exercise iconv_prog options that originally led to these hangs.
It also includes a new regression test for option handling in the iconv
function.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 91927b7c76)
__GLRO loaded the word after the requested variable on big-endian
PowerPC, where LOWORD is 4. This can cause the memset implement
go wrong because the masking with the cache line size produces
wrong results, particularly if the loaded value happens to be 1.
The __GLRO macro is not used in any place where loading the lower
32-bit word of a 64-bit value is desired, so the +4 offset is always
wrong.
Fixes commit 18363b4f01
("powerpc: Move cache line size to rtld_global_ro") and bug 26332.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 7650321ce0)
nptl has
/* Opcodes and data types for communication with the signal handler to
change user/group IDs. */
struct xid_command
{
int syscall_no;
long int id[3];
volatile int cntr;
volatile int error;
};
/* This must be last, otherwise the current thread might not have
permissions to send SIGSETXID syscall to the other threads. */
result = INTERNAL_SYSCALL_NCS (cmdp->syscall_no, 3,
cmdp->id[0], cmdp->id[1], cmdp->id[2]);
But the second argument of setgroups syscal is a pointer:
int setgroups (size_t size, const gid_t *list);
But on x32, pointers passed to syscall must have pointer type so that
they will be zero-extended. The kernel XID arguments are unsigned and
do not require sign extension. Change xid_command to
struct xid_command
{
int syscall_no;
unsigned long int id[3];
volatile int cntr;
volatile int error;
};
so that all arguments are zero-extended. A testcase is added for x32 and
setgroups returned with EFAULT when running as root without the fix.
(cherry picked from commit 0ad926f349)
The SELinux API deprecated several symbols in its 3.1 release, including
security_context_t, matchpathcon, avc_init, and sidput, which are used in
makedb and nscd. While the usage of these should eventually be replaced by
newer interfaces, this commit disables GCC warnings due to the use of the
above symbols.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 04726be814)
Unsigned branch instructions could be used for r2 to fix the wrong
behavior when a negative length is passed to memcpy.
This commit fixes the armv7 version.
(cherry picked from commit beea361050)
Unsigned branch instructions could be used for r2 to fix the wrong
behavior when a negative length is passed to memcpy and memmove.
This commit fixes the generic arm implementation of memcpy amd memmove.
(cherry picked from commit 79a4fa341b)
strcmp-avx2.S: In avx2 strncmp function, strings are compared in
chunks of 4 vector size(i.e. 32x4=128 byte for avx2). After first 4
vector size comparison, code must check whether it already passed
the given offset. This patch implement avx2 offset check condition
for strncmp function, if both string compare same for first 4 vector
size.
(cherry picked from commit 75870237ff)
During cleanup, before returning from get*_r functions, the end*ent
calls must not change errno. Otherwise, an ERANGE error from the
underlying implementation can be hidden, causing unexpected lookup
failures. This commit introduces an internal_end*ent_noerror
function which saves and restore errno, and marks the original
internal_end*ent function as warn_unused_result, so that it is used
only in contexts were errors from it can be handled explicitly.
Reviewed-by: DJ Delorie <dj@redhat.com>
(cherry picked from commit 790b8dda44)
This patch fixes the optimized implementation of strcpy and strnlen
on a big-endian arm64 machine.
The optimized method uses neon, which can process 128bit with one
instruction. On a big-endian machine, the bit order should be reversed
for the whole 128-bits double word. But with instuction
rev64 datav.16b, datav.16b
it reverses 64bits in the two halves rather than reversing 128bits.
There is no such instruction as rev128 to reverse the 128bits, but we
can fix this by loading the data registers accordingly.
Fixes 0237b61526e7("aarch64: Optimized implementation of strcpy") and
2911cb68ed3d("aarch64: Optimized implementation of strnlen").
Signed-off-by: Lexi Shao <shaolexi@huawei.com>
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
(cherry picked from commit 59b64f9cbb)
When using outline atomics (-moutline-atomics, the default for ARMv8-A
starting with GCC 10), libgcc contains an ELF constructor which calls
__getauxval. This code is built outside of glibc, so none of its
internal PLT avoidance schemes can be applied to it. This change
suppresses the elf/check-localplt failure.
(cherry picked from commit 16536e98e3)
(cherry picked from commit 587a332b6fadc4d9f1035ecaa52ba32ee41cd300)
Since __x86_shared_non_temporal_threshold is defined as
long int __x86_shared_non_temporal_threshold;
and long int is 4 bytes for x32, use RDX_LP to compare against
__x86_shared_non_temporal_threshold in assembly code.
(cherry picked from commit 55c7bcc71b)
Confirmed by CLDR and a native speaker: "abril" is more often used even
if "abrial" is also correct. Both nominative (alt_mon) and genitive (mon)
cases are updated.
Add a C wrapper to pass arguments in
/* Control process execution. */
extern int prctl (int __option, ...) __THROW;
to prctl syscall:
extern int prctl (int, unsigned long int, unsigned long int,
unsigned long int, unsigned long int);
(cherry picked from commit ff026950e2)
LOADARGS_N in powerpc/sysdep.h uses argN as local variables. It breaks
when argN is also a function argument. Rename argN to _argN to avoid
conflict.
(cherry picked from commit 14f43dd34d)
Since the the U marker can only be applied to 2 unsigned long arguments
in syscalls.list files, add a C wrapper for process_vm_readv and
process_vm_writev syscals which have more than 2 unsigned long arguments.
(cherry picked from commit ad9fd65d71)
Mark unsigned long arguments in mmap, read, recv, recvfrom, send, sendto,
write, ioperm, sendfile64, setxattr, lsetxattr, fsetxattr, getxattr,
lgetxattr, fgetxattr, listxattr, llistxattr and flistxattr with U in
syscalls.list files.
(cherry picked from commit 86f4f2263b)
Add a test to pass 64-bit long arguments to syscall with undefined upper
32 bits on x32.
Tested on i386, x86-64 and x32 as well as with build-many-glibcs.py.
(cherry picked from commit 781dacc4f4)
X32 has 32-bit long and pointer with 64-bit off_t. Since x32 psABI
requires that pointers passed in registers must be zero-extended to
64bit, x32 can share many syscall interfaces with LP64. When a LP64
syscall with long and unsigned long int arguments is used for x32, these
arguments must be properly extended to 64-bit. Otherwise if the upper
32 bits of the register have undefined value, such a syscall will be
rejected by kernel.
For syscalls implemented in assembly codes, 'U' is added to syscall
signature key letters for unsigned long, which is zero-extended to
64-bit types. SYSCALL_ULONG_ARG_1 and SYSCALL_ULONG_ARG_2 are passed
to syscall-template.S for the first and the second unsigned long int
arguments if PSEUDOS_HAVE_ULONG_INDICES is defined. They are used by
x32 to zero-extend 32-bit arguments to 64 bits.
Tested on i386, x86-64 and x32 as well as with build-many-glibcs.py.
(cherry picked from commit 2ad5d0845d)
X32 has 32-bit long and pointer with 64-bit off_t. Since x32 psABI
requires that pointers passed in registers must be zero-extended to
64bit, x32 can share many syscall interfaces with LP64. When a LP64
syscall with long and unsigned long arguments is used for x32, these
arguments must be properly extended to 64-bit. Otherwise if the upper
32 bits of the register have undefined value, such a syscall will be
rejected by kernel.
Enforce zero-extension for pointers and array system call arguments.
For integer types, extend to int64_t (the full register) using a
regular cast, resulting in zero or sign extension based on the
signedness of the original type.
For
void *mmap(void *addr, size_t length, int prot, int flags,
int fd, off_t offset);
we now generate
0: 41 f7 c1 ff 0f 00 00 test $0xfff,%r9d
7: 75 1f jne 28 <__mmap64+0x28>
9: 48 63 d2 movslq %edx,%rdx
c: 89 f6 mov %esi,%esi
e: 4d 63 c0 movslq %r8d,%r8
11: 4c 63 d1 movslq %ecx,%r10
14: b8 09 00 00 40 mov $0x40000009,%eax
19: 0f 05 syscall
That is
1. addr is unchanged.
2. length is zero-extend to 64 bits.
3. prot is sign-extend to 64 bits.
4. flags is sign-extend to 64 bits.
5. fd is sign-extend to 64 bits.
6. offset is unchanged.
For int arguments, since kernel uses only the lower 32 bits and ignores
the upper 32 bits in 64-bit registers, these work correctly.
Tested on x86-64 and x32. There are no code changes on x86-64.
(cherry picked from commit df76ff3a44)
On platforms where long double has the same ABI as double, glibc
defines long double functions as aliases for the corresponding double
functions. The declarations of those functions in <math.h> are
disabled to avoid problems with aliases having incompatible types, but
GCC 10 now gives errors for incompatible types when the long double
function is known to GCC as a built-in function, not just when there
is an incompatible header declaration.
This patch fixes those errors by using appropriate
-fno-builtin-<function> options to compile the double functions. The
list of CFLAGS-* settings is an appropriately adapted version of that
in sysdeps/ieee754/ldbl-opt/Makefile used there for building nldbl-*.c
files; in particular, the options are used even if GCC does not
currently have a built-in function of a given function, so that adding
such a built-in function in future will not break the glibc build.
Thus, various of the CFLAGS-* settings are only for future-proofing
and may not currently be needed (and it's possible some could be
irrelevant for other reasons).
Tested with build-many-glibcs.py for arm-linux-gnueabi (compilers and
glibcs builds), where it fixes the build that previously failed.
(cherry picked from commit 49348beafe)
This addresses an issue that is present mainly on SMP machines running
threaded code. In a typical indirect call or PLT import stub, the
target address is loaded first. Then the global pointer is loaded into
the PIC register in the delay slot of a branch to the target address.
During lazy binding, the target address is a trampoline which transfers
to _dl_runtime_resolve().
_dl_runtime_resolve() uses the relocation offset stored in the global
pointer and the linkage map stored in the trampoline to find the
relocation. Then, the function descriptor is updated.
In a multi-threaded application, it is possible for the global pointer
to be updated between the load of the target address and the global
pointer. When this happens, the relocation offset has been replaced
by the new global pointer. The function pointer has probably been
updated as well but there is no way to find the address of the function
descriptor and to transfer to the target. So, _dl_runtime_resolve()
typically crashes.
HP-UX addressed this problem by adding an extra pc-relative branch to
the trampoline. The descriptor is initially setup to point to the
branch. The branch then transfers to the trampoline. This allowed
the trampoline code to figure out which descriptor was being used
without any modification to user code. I didn't use this approach
as it is more complex and changes function pointer canonicalization.
The order of loading the target address and global pointer in
indirect calls was not consistent with the order used in import stubs.
In particular, $$dyncall and some inline versions of it loaded the
global pointer first. This was inconsistent with the global pointer
being updated first in dl-machine.h. Assuming the accesses are
ordered, we want elf_machine_fixup_plt() to store the global pointer
first and calls to load it last. Then, the global pointer will be
correct when the target function is entered.
However, just to make things more fun, HP added support for
out-of-order execution of accesses in PA 2.0. The accesses used by
calls are weakly ordered. So, it's possibly under some circumstances
that a function might be entered with the wrong global pointer.
However, HP uses weakly ordered accesses in 64-bit HP-UX, so I assume
that loading the global pointer in the delay slot of the branch must
work consistently.
The basic fix for the race is a combination of modifying user code to
preserve the address of the function descriptor in register %r22 and
setting the least-significant bit in the relocation offset. The
latter was suggested by Carlos as a way to distinguish relocation
offsets from global pointer values. Conventionally, %r22 is used
as the address of the function descriptor in calls to $$dyncall.
So, it wasn't hard to preserve the address in %r22.
I have updated gcc trunk and gcc-9 branch to not clobber %r22 in
$$dyncall and inline indirect calls. I have also modified the import
stubs in binutils trunk and the 2.33 branch to preserve %r22. This
required making the stubs one instruction longer but we save one
relocation. I also modified binutils to align the .plt section on
a 8-byte boundary. This allows descriptors to be updated atomically
with a floting-point store.
With these changes, _dl_runtime_resolve() can fallback to an alternate
mechanism to find the relocation offset when it has been clobbered.
There's just one additional instruction in the fast path. I tested
the fallback function, _dl_fix_reloc_arg(), by changing the branch to
always use the fallback. Old code still runs as it did before.
Fixes bug 23296.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 1a044511a3)
Commit 06436acf81 created a kernel-features.h
file with '#undef __ASSUME_SYSVIPC_DEFAULT_IPC_64', which is wrong for Nios II.
Deleting the header.
(cherry picked from commit 38c6788818)
MIPS fallback code handle a frame where its FDE can not be obtained
(for instance a signal frame) by reading the kernel allocated signal frame
and adding '2' to the value of 'sc_pc' [1]. The added value is used to
recognize an end of an EH region on mips16 [2].
The fix adjust the obtained signal frame value and remove the libgcc added
value by checking if the previous frame is a signal frame one.
Checked with backtrace and tst-sigcontext-get_pc tests on mips-linux-gnu
and mips64-linux-gnu.
[1] libgcc/config/mips/linux-unwind.h from gcc code.
[2] gcc/config/mips/mips.h from gcc code. */
(cherry picked from commit 6e05978f0c)
It fixes 5fb7fc9635 when posix_spawn fails.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cheery picked from commit f09542c584)
The value of `end_name' points into the value of `dirname', thus don't
deallocate the latter before the last use of the former.
(cherry picked from commit ddc650e9b3)
Linux 5.5 has no new syscalls to add to syscall-names.list, but it
does newly enable the clone3 syscall for AArch64. This patch updates
the kernel version listed in syscall-names.list and regenerates the
AArch64 arch-syscall.h.
Tested with build-many-glibcs.py.
(cherry picked from commit 5828bc4523)
This fixes commit 9333498794 ("Avoid ldbl-96 stack
corruption from range reduction of pseudo-zero (bug 25487).").
(cherry picked from commit c10acd4026)
It seems that some gcc versions might generates a stack frame for the
sigreturn stub requires on sparc signal handling. For instance:
$ cat test.c
#define _GNU_SOURCE
#include <sys/syscall.h>
__attribute__ ((__optimize__ ("-fno-stack-protector")))
void
__sigreturn_stub (void)
{
__asm__ ("mov %0, %%g1\n\t"
"ta 0x10\n\t"
: /* no outputs */
: "i" (SYS_rt_sigreturn));
}
$ gcc -v
[...]
gcc version 9.2.1 20200224 (Debian 9.2.1-30)
$ gcc -O2 -m64 test.c -S -o -
[...]
__sigreturn_stub:
save %sp, -176, %sp
#APP
! 9 "t.c" 1
mov 101, %g1
ta 0x10
! 0 "" 2
#NO_APP
.size __sigreturn_stub, .-__sigreturn_stub
As indicated by kernel developers [1], the sigreturn stub can not change
the register window or the stack pointer since the kernel has setup the
restore frame at a precise location relative to the stack pointer when
the stub is invoked.
I tried to play with some compiler flags and even with _Noreturn and
__builtin_unreachable after the asm does not help (and Sparc does not
support naked functions).
To avoid similar issues, as the stack-protector support also have
stumbled, this patch moves the implementation of the sigreturn stubs to
assembly.
Checked on sparcv9-linux-gnu and sparc64-linux-gnu with gcc 9.2.1
and gcc 7.5.0.
[1] https://lkml.org/lkml/2016/5/27/465
The commit "arm: Split BE/LE abilist"
(1673ba87fe) changed the soft-fp order for
ARM selection when __SOFTFP__ is defined by the compiler.
On 2.30 the sysdeps order is:
2.30
sysdeps/unix/sysv/linux/arm
sysdeps/arm/nptl
sysdeps/unix/sysv/linux
sysdeps/nptl
sysdeps/pthread
sysdeps/gnu
sysdeps/unix/inet
sysdeps/unix/sysv
sysdeps/unix/arm
sysdeps/unix
sysdeps/posix
sysdeps/arm/nofpu
sysdeps/ieee754/soft-fp
sysdeps/arm
sysdeps/wordsize-32
sysdeps/ieee754/flt-32
sysdeps/ieee754/dbl-64
sysdeps/ieee754
sysdeps/generic
While on master is:
sysdeps/unix/sysv/linux/arm/le
sysdeps/unix/sysv/linux/arm
sysdeps/arm/nptl
sysdeps/unix/sysv/linux
sysdeps/nptl
sysdeps/pthread
sysdeps/gnu
sysdeps/unix/inet
sysdeps/unix/sysv
sysdeps/unix/arm
sysdeps/unix
sysdeps/posix
sysdeps/arm/le
sysdeps/arm
sysdeps/wordsize-32
sysdeps/ieee754/flt-32
sysdeps/ieee754/dbl-64
sysdeps/arm/nofpu
sysdeps/ieee754/soft-fp
sysdeps/ieee754
sysdeps/generic
It make the build select some routines (fadd, fdiv, fmul, fsub, and fma)
on ieee754/flt-32 and ieee754/dbl-64 that requires fenv support to be
correctly rounded which in turns lead to math failures since the
__SOFTFP__ does not have fenv support.
With this patch the order is now:
sysdeps/unix/sysv/linux/arm/le
sysdeps/unix/sysv/linux/arm
sysdeps/arm/nptl
sysdeps/unix/sysv/linux
sysdeps/nptlsysdeps/pthread
sysdeps/gnu
sysdeps/unix/inet
sysdeps/unix/sysv
sysdeps/unix/arm
sysdeps/unix
sysdeps/posix
sysdeps/arm/le/nofpu
sysdeps/arm/nofpu
sysdeps/ieee754/soft-fp
sysdeps/arm/le
sysdeps/arm
sysdeps/wordsize-32
sysdeps/ieee754/flt-32
sysdeps/ieee754/dbl-64
sysdeps/ieee754
sysdeps/generic
Checked on arm-linux-gnuaebi.
(cherry picked from commit af09e5e5d9)
