TLS in a dlopened object works fine when accessed from a signal
handler. The default kernel scheduling parameters prevents the
testcase to finish within the 4 seconds.
Tested the bigger timeout on s390 and s390x.
Since asynchronous cancellation was removed from system by
commit c4dd57c300
Author: Ondřej Bílka <neleai@seznam.cz>
Date: Tue Jan 14 16:07:50 2014 +0100
Do not enable asynchronous cancellation in system. Fixes bug 14782.
We needlessly enabled thread cancellation before it was necessary.
As
only call that needs to be guarded is waitpid which is cancellation
point we could remove cancellation altogether.
we shouldn't check asynchronous cancellation on system.
[BZ #14782]
* tst-cancel-wrappers.sh: Remove system.
This commit adds a testcase for pthread_setname_np
and pthread_getname_np. The testcase itself has
four tests to validate that these functions work
as expected. The test is only enabled for Linux
since it requires access to an alternate method
for validating the functions work.
This updates glibc for the changes in the ELFv2 relating to the
stack frame layout. These are described in more detail here:
http://gcc.gnu.org/ml/gcc-patches/2013-11/msg01149.htmlhttp://gcc.gnu.org/ml/gcc-patches/2013-11/msg01146.html
Specifically, the "compiler and linker doublewords" were removed,
which has the effect that the save slot for the TOC register is
now at offset 24 rather than 40 to the stack pointer.
In addition, a function may now no longer necessarily assume that
its caller has set up a 64-byte register save area its use.
To address the first change, the patch goes through all assembler
files and replaces immediate offsets in instructions accessing the
ABI-defined stack slots by symbolic offsets. Those already were
defined in ucontext_i.sym and used in some of the context routines,
but that doesn't really seem like the right place for those defines.
The patch instead defines those symbolic offsets in sysdeps.h,
in two variants for the old and new ABI, and uses them systematically
in all assembler files, not just the context routines.
The second change only affected a few assembler files that used
the save area to temporarily store some registers. In those
cases where this happens within a leaf function, this patch
changes the code to store those registers to the "red zone"
below the stack pointer. Otherwise, the functions already allocate
a stack frame, and the patch changes them to add extra space in
these frames as temporary space for the ELFv2 ABI.
The TCB header on Intel contains a field __private_ss that is used
to efficiently implement the -fsplit-stack GCC feature.
In order to prepare for a possible future implementation of that
feature on powerpc64, we'd like to reserve a similar field in
the TCB header as well. (It would be good if this went in with
or before the ELFv2 patches to ensure that this field will be
available always in the ELFv2 environment.)
The field needs to be added at the front of tcbhead_t structure
to avoid changing the ABI; see the recent discussion when adding
the EBB fields.
Autoconf has been deprecating configure.in for quite a long time.
Rename all our configure.in and preconfigure.in files to .ac.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
http://sourceware.org/ml/libc-alpha/2013-08/msg00096.html
This adds the basic configury bits for powerpc64le and powerpcle.
* configure.in: Map powerpc64le and powerpcle to base_machine/machine.
* configure: Regenerate.
* nptl/shlib-versions: Powerpc*le starts at 2.18.
* shlib-versions: Likewise.
http://sourceware.org/ml/libc-alpha/2013-08/msg00090.html
This patch fixes symbol versioning in setjmp/longjmp. The existing
code uses raw versions, which results in wrong symbol versioning when
you want to build glibc with a base version of 2.19 for LE.
Note that the merging the 64-bit and 32-bit versions in novmx-lonjmp.c
and pt-longjmp.c doesn't result in GLIBC_2.0 versions for 64-bit, due
to the base in shlib_versions.
* sysdeps/powerpc/longjmp.c: Use proper symbol versioning macros.
* sysdeps/powerpc/novmx-longjmp.c: Likewise.
* sysdeps/powerpc/powerpc32/bsd-_setjmp.S: Likewise.
* sysdeps/powerpc/powerpc32/bsd-setjmp.S: Likewise.
* sysdeps/powerpc/powerpc32/fpu/__longjmp.S: Likewise.
* sysdeps/powerpc/powerpc32/fpu/setjmp.S: Likewise.
* sysdeps/powerpc/powerpc32/mcount.c: Likewise.
* sysdeps/powerpc/powerpc32/setjmp.S: Likewise.
* sysdeps/powerpc/powerpc64/setjmp.S: Likewise.
* nptl/sysdeps/unix/sysv/linux/powerpc/pt-longjmp.c: Likewise.
Fixes BZ #15988.
The check had a typo - it checked for PTHREAD_MUTEX_ROBUST_NP instead
of PTHREAD_MUTEX_ROBUST_NORMAL_NP. It has now been replaced by the
already existing convenience macro USE_REQUEUE_PI.
Resolves#15921
The test case nptl/tst-cleanup2 fails on s390x and power6 due to
instruction sheduling in gcc. This was reported in gcc:
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58034
but it was concluded that gcc is allowed to assume that the first
argument to sprintf is a character array - NULL not being a valid
character array.
PTHREAD_MUTEX_NORMAL requires deadlock for nesting, DEFAULT
does not. Since glibc uses the same value (0) disable elision
for any call to pthread_mutexattr_settype() with a 0 value.
This implies that a program can disable elision by doing
pthread_mutexattr_settype(&attr, PTHREAD_MUTEX_NORMAL)
Based on a original proposal by Rich Felker.
Add elision paths to the basic mutex locks.
The normal path has a check for RTM and upgrades the lock
to RTM when available. Trylocks cannot automatically upgrade,
so they check for elision every time.
We use a 4 byte value in the mutex to store the lock
elision adaptation state. This is separate from the adaptive
spin state and uses a separate field.
Condition variables currently do not support elision.
Recursive mutexes and condition variables may be supported at some point,
but are not in the current implementation. Also "trylock" will
not automatically enable elision unless some other lock call
has been already called on the lock.
This version does not use IFUNC, so it means every lock has one
additional check for elision. Benchmarking showed the overhead
to be negligible.
tst-mutex5 and 8 test some behaviour not required by POSIX,
that elision changes. This changes these tests to not check
this when elision is enabled at configure time.
Add Enable/disable flags used internally
Extend the mutex initializers to have the fields needed for
elision. The layout stays the same, and this is not visible
to programs.
These changes are not exposed outside pthread
Lock elision using TSX is a technique to optimize lock scaling
It allows to run locks in parallel using hardware support for
a transactional execution mode in 4th generation Intel Core CPUs.
See http://www.intel.com/software/tsx for more Information.
This patch implements a simple adaptive lock elision algorithm based
on RTM. It enables elision for the pthread mutexes and rwlocks.
The algorithm keeps track whether a mutex successfully elides or not,
and stops eliding for some time when it is not.
When the CPU supports RTM the elision path is automatically tried,
otherwise any elision is disabled.
The adaptation algorithm and its tuning is currently preliminary.
The code adds some checks to the lock fast paths. Micro-benchmarks
show little to no difference without RTM.
This patch implements the low level "lll_" code for lock elision.
Followon patches hook this into the pthread implementation
Changes with the RTM mutexes:
-----------------------------
Lock elision in pthreads is generally compatible with existing programs.
There are some obscure exceptions, which are expected to be uncommon.
See the manual for more details.
- A broken program that unlocks a free lock will crash.
There are ways around this with some tradeoffs (more code in hot paths)
I'm still undecided on what approach to take here; have to wait for testing reports.
- pthread_mutex_destroy of a lock mutex will not return EBUSY but 0.
- There's also a similar situation with trylock outside the mutex,
"knowing" that the mutex must be held due to some other condition.
In this case an assert failure cannot be recovered. This situation is
usually an existing bug in the program.
- Same applies to the rwlocks. Some of the return values changes
(for example there is no EDEADLK for an elided lock, unless it aborts.
However when elided it will also never deadlock of course)
- Timing changes, so broken programs that make assumptions about specific timing
may expose already existing latent problems. Note that these broken programs will
break in other situations too (loaded system, new faster hardware, compiler
optimizations etc.)
- Programs with non recursive mutexes that take them recursively in a thread and
which would always deadlock without elision may not always see a deadlock.
The deadlock will only happen on an early or delayed abort (which typically
happens at some point)
This only happens for mutexes not explicitely set to PTHREAD_MUTEX_NORMAL
or PTHREAD_MUTEX_ADAPTIVE_NP. PTHREAD_MUTEX_NORMAL mutexes do not elide.
The elision default can be set at configure time.
This patch implements the basic infrastructure for elision.
Static applications that call pthread_exit on the main
thread segfault. This is because after a thread terminates
__libc_start_main decrements __nptl_nthreads which is only
defined in pthread_create. Therefore the right solution is
to add a requirement to pthread_create from pthread_exit.
~~~
nptl/
2013-06-24 Vladimir Nikulichev <v.nikulichev@gmail.com>
[BZ #12310]
* pthread_exit.c: Add reference to pthread_create.
This patch introduces two new convenience functions to set the default
thread attributes used for creating threads. This allows a programmer
to set the default thread attributes just once in a process and then
run pthread_create without additional attributes.
Resolves BZ #15618.
pthread_attr_getaffinity_np may write beyond bounds of the input
cpuset buffer if the size of the input buffer is smaller than the
buffer present in the input pthread attributes. Fix is to copy to the
extent of the minimum of the source and the destination.
It is very very possible that the futex syscall returns an
error and that the caller of lll_futex_wake may want to
look at that error and propagate the failure.
This patch allows a caller to see the syscall error.
There are no users of the syscall error at present, but
future cleanups are now be able to check for the error.
--
nplt/
2013-06-10 Carlos O'Donell <carlos@redhat.com>
* sysdeps/unix/sysv/linux/i386/lowlevellock.h
(lll_futex_wake): Return syscall error.
* sysdeps/unix/sysv/linux/x86_64/lowlevellock.h
(lll_futex_wake): Return syscall error.
The sem_post.c file uses atomic functions without including
atomic.h. Add `#include <atomic.h>' to the file to prevent
any compile time warnings when other headers change and
atomic.h isn't implicitly included.
---
nptl/
2013-04-07 Carlos O'Donell <carlos@redhat.com>
* sysdeps/unix/sysv/linux/sem_post.c: Include atomic.h.
Fixes BZ #15337.
Static builds fail with the following warning:
/home/tools/glibc/glibc/nptl/../nptl/sysdeps/unix/sysv/linux/x86_64/cancellation.S:80:
undefined reference to `__GI___pthread_unwind'
When the source is configured with --disable-hidden-plt. This is
because the preprocessor conditional in cancellation.S only checks if
the build is for SHARED, whereas hidden_def is defined appropriately
only for a SHARED build that will have symbol versioning *and* hidden
defs are enabled. The last case is false here.
This reverts the change that allows the POSIX Thread default stack size
to be changed by the environment variable
GLIBC_PTHREAD_DEFAULT_STACKSIZE. It has been requested that more
discussion happen before this change goes into 2.18.
This feature is specifically for the C++ compiler to offload calling
thread_local object destructors on thread program exit, to glibc.
This is to overcome the possible complication of destructors of
thread_local objects getting called after the DSO in which they're
defined is unloaded by the dynamic linker. The DSO is marked as
'unloadable' if it has a constructed thread_local object and marked as
'unloadable' again when all the constructed thread_local objects
defined in it are destroyed.
* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_timedwait.S
(__pthread_cond_timedwait): If possible use FUTEX_WAIT_BITSET to
directly use absolute timeout.
Since the FUTEX_WAIT operation takes a relative timeout, the
pthread_cond_timedwait and other timed function implementations have
to get a relative timeout from the absolute timeout parameter it gets
before it makes the futex syscall. This value is then converted back
into an absolute timeout within the kernel. This is a waste and has
hence been improved upon by a FUTEX_WAIT_BITSET operation (OR'd with
FUTEX_CLOCK_REALTIME to make the kernel use the realtime clock instead
of the default monotonic clock). This was implemented only in the x86
and sh assembly code and not in the C code. This patch implements
support for FUTEX_WAIT_BITSET whenever available (since linux-2.6.29)
for s390 and powerpc.
nptl/
* sysdeps/unix/sysv/linux/sparc/lowlevellock.h (BUSY_WAIT_NOP):
Define when we have v9 instructions available.
* sysdeps/unix/sysv/linux/sparc/sparc64/cpu_relax.S: New file.
* sysdeps/unix/sysv/linux/sparc/sparc32/sparcv9/cpu_relax.S: New
file.
* sysdeps/unix/sysv/linux/sparc/sparc32/sparcv9/Makefile: New
file.
* sysdeps/unix/sysv/linux/sparc/sparc64/Makefile: Add cpu_relax
to libpthread-routines.
The macro pthread_cleanup_push_defer_np in pthread.h has a misaligned
line continuation marker. This marker was previously aligned, but
recent changes have moved it out of alignment. This change realigns
the marker. This also reduces the diff against the hppa version of
pthread.h where the marker is aligned.
[BZ #14652]
When a thread waiting in pthread_cond_wait with a PI mutex is
cancelled after it has returned successfully from the futex syscall
but just before async cancellation is disabled, it enters its
cancellation handler with the mutex held and simply calling a
mutex_lock again will result in a deadlock. Hence, it is necessary to
see if the thread owns the lock and try to lock it only if it doesn't.
[BZ #14568]
* sysdeps/sparc/tls.h (DB_THREAD_SELF_INCLUDE): Delete.
(DB_THREAD_SELF): Use constants for the register offsets. Correct
the case of a 64-bit debugger with a 32-bit inferior.
[BZ #14417]
A futex call with FUTEX_WAIT_REQUEUE_PI returns with the mutex locked
on success. If such a successful thread is pipped to the cond_lock by
another spuriously woken waiter, it could be sent back to wait on the
futex with the mutex lock held, thus causing a deadlock. So it is
necessary that the thread relinquishes the mutex before going back to
sleep.
[BZ #14477]
Add an additional entry in the exception table to jump to
__condvar_w_cleanup2 instead of __condvar_w_cleanup for PI mutexes
when %ebx contains the address of the futex instead of the condition
variable.
Ref gcc.gnu.org/bugzilla/show_bug.cgi?id=52839#c10
Release barriers are needed to ensure that any memory written by
init_routine is seen by other threads before *once_control changes.
In the case of clear_once_control we need to flush any partially
written state.
In some cases, the compiler would optimize out the call to
allocate_and_test and thus result in a false positive for the test
case. Another problem was the fact that the compiler could in some
cases generate additional shifting of the stack pointer, resulting in
alloca moving the stack pointer beyond what is allowed by the
rlimit. Hence, accessing the stackaddr returned by pthread_getattr_np
is safer than relying on the alloca'd result.
Another problem is when RLIMIT may be very large, which may result in
violation of other resource limits. Hence we cap the max stack size to
8M for this test.
When rlimit is small enough to be used as the stacksize to be returned
in pthread_getattr_np, cases where a stack is made executable due to a
DSO load get stack size that is larger than what the kernel
allows. This is because in such a case the stack size does not account
for the pages that have auxv and program arguments.
Additionally, the stacksize for the process derived from this should
be truncated to align to page size to avoid going beyond rlimit.
When a stack is marked executable due to loading a DSO that requires
an executable stack, the logic tends to leave out a portion of stack
after the first frame, thus causing a difference in the value returned
by pthread_getattr_np before and after the stack is marked
executable. It ought to be possible to fix this by marking the rest of
the stack as executable too, but in the interest of marking as less of
the stack as executable as possible, the path this fix takes is to
make pthread_getattr_np also look at the first frame as the underflow
end of the stack and compute size and stack top accordingly.
The above happens only for the main process stack. NPTL thread stacks
are not affected by this change.
There is nothing in the POSIX specification to disallow a
single-threaded program from cancelling itself, so we forcibly enable
multiple_threads to allow the next available cancellation point in the
thread to run.
Also added additional tests to cover various cancellation scenarios.
nptl/
* sysdeps/sparc/sparc64/pthread_spin_unlock.S: Fix thinko, we
always have to return 0, especially for the pthread_spin_init
alias.
* sysdeps/sparc/sparc32/pthread_spin_lock.S: Add missing trailing
newline.
* sysdeps/sparc/sparc32/sparcv9/pthread_spin_lock.S: Likewise.
* sysdeps/sparc/sparc64/pthread_spin_lock.S: Likewise.
* tst-cond16.c (do_test): Use a thread stack size which is either
PTHREAD_STACK_MIN or the page size, whichever is larger.
* tst-cond18.c (do_test): Likewise.
nptl/
[BZ #13844]
* sysdeps/unix/sysv/linux/libc-lowlevellock.c: Include using <..>
instead of "...".
* sysdeps/unix/sysv/linux/sparc/sparc32/libc-lowlevellock.c:
Delete, not needed.
/
* sysdeps/unix/sysv/linux/sparc/sparc64/get_clockfreq.c
(set_obp_int): New function.
(get_obp_int): New function.
(__get_clockfreq_via_dev_openprom): Likewise.
* sysdeps/unix/sysv/linux/sparc/sysdep.h (INTERNAL_SYSCALL_ERROR_P): Avoid
unused variable warnings on 'val' and use builtin_expect.
(INLINE_SYSCALL): Don't wrap INTERNAL_SYSCALL_ERROR_P with builtin_expect.
(INLINE_CLONE_SYSCALL): Likewise.
nptl/
* sysdeps/unix/sysv/linux/sparc/sem_post.c (__new_sem_post): Use
atomic_increment and remove unused local variable.
(__old_sem_post): Likewise.
/
* sysdeps/sparc/Makefile: Add -fPIC when building crt{i,n}.S
* sysdeps/sparc/crti.S: New file.
* sysdeps/sparc/crtn.S: New file.
* sysdeps/sparc/sparc32/Makefile: Remove initfini handling.
* sysdeps/sparc/sparc64/Makefile: Likewise.
nptl/
* sysdeps/sparc/Makefile: Add -fPIC when building pt-crti.S and crtn.S
At least the Linux kernel provides field where the kernel originally
stores the command which is executed by the thread. The value can
subsequently be overwritten. The added functions allow to do that for
threads, providing and abstraction around the syscalls or /proc file
system accesses needed.
If a signal arrived during a symbol lookup and the signal handler also
required a symbol lookup, the end of the lookup in the signal handler reset
the flag whether restoring AVX/SSE registers is needed. Resetting means
in this case that the tail part of the outer lookup code will try to
restore the registers and this can fail miserably. We now restore to the
previous value which makes nesting calls possible.
The syscall wrappers had to save and restore the syscall parameter
values and return value when calling the functions to enable/disable
cancellation were called. Not anymore. The called functions are
special and don't modify any unexpected registers.
SSE registers are used for passing parameters and must be preserved
in runtime relocations. This is inside ld.so enforced through the
tests in tst-xmmymm.sh. But the malloc routines used after startup
come from libc.so and can be arbitrarily complex. It's overkill
to save the SSE registers all the time because of that. These calls
are rare. Instead we save them on demand. The new infrastructure
put in place in this patch makes this possible and efficient.
It just happens that __pthread_enable_asynccancel doesn't modify the $rdi
register. But this isn't guaranteed. Hence we reload the register after
the calls.
The kernel from 2.3.31 on supports the rt_tgsigqueueinfo syscall.
Use it to implement the non-standard extension which, like
sigqueue, can pass additional data to the receiving thread.
Due to a pasto the fallocate64 interface, introduced in glibc 2.10,
isn't exported for 32-bit Linux platforms. It is too late for this
now so exported them for glibc 2.11.
Because we are not shutting down the other threads first another
thread might work on a query before the process shuts down. In this
case the now uninitialized libselinux and libaudit might be used.
Just don't free the resources. It's not necessary anyway because
the process is about to terminate.
The bits tested to decide when to delay the return when switching
off async cancel mode were wrong. Fix that. Also close a race
condition in pthread_cancel where the bit indicating the cancellation
is unconditionally set even if the cancel type might have changed.
When disabling async cancellation we cannot return from the function
call if the thread is canceled. This happens when the cancel bits
have been set before async cancel is disabled but the signal hasn't
been sent/received yet. Delay for as long as necessary since
otherwise the signal might be received in an unsafe context.
2009-01-07 Ulrich Drepper <drepper@redhat.com>
* (in_flight_stack): New variable.
(stack_list_del): New function. Use instead of list_del.
(stack_list_add): New function. Use instead of list_add when adding to
stack_cache and stack_used lists.
(__reclaim_stacks): Complete operations on stack_cache and stack_used lists
when the fork call interrupted another thread.
* wcsmbs/wchar.h: mbsnrtowcs, open_wmemstream, wcpcpy, wcpncpy,
wcscasecmp, wcsdup, wcsncasecmp, wcsnlen, wcsnrtombs,
wcscasecmp_l, wcsncasecmp_l, wcscoll_l, and wcsxfrm_l.
* sysdeps/mach/hurd/bits/posix_opt.h: Reset value of macros from
200112L to 200809L.
* sysdeps/unix/sysv/linux/bits/posix_opt.h: Likewise.
* posix/getconf.c (vars): Add _SC_THREAD_ROBUST_PRIO_INHERIT and
_SC_THREAD_ROBUST_PRIO_PROTECT entries.
* bits/confname.h: Add _SC_THREAD_ROBUST_PRIO_INHERIT and
_SC_THREAD_ROBUST_PRIO_PROTECT.
* posix/unistd.h: fexecve is in POSIX 2008.
* time/time.h: strftime_l is in POSIX 2008.
* io/sys/stat.h: futimens is in POSIX 2008.
* string/strings.h: strcasecmp_l and strncasecmp_l are in POSIX 2008.
* string/string.h: stpcpy, stpncpy, strndup, strnlen, strsignal,
strcoll_l, strerror_l, and strxfrm_l are in POSIX 2008.
* stdlib/stdlib.h: mkdtemp is in POSIX 2008.
(__free_stack_cache): Removed. Change callers to call __free_stacks.
* init.c (nptl_freeres): New function.
(pthread_functions): Initialize ptr_freeres to nptl_freeres.
* pthreadP.h: Don't declare __free_stack_cache. Declare __free_stacks.
* sysdeps/pthread/unwind-forcedunwind.c (libgcc_s_handle): New
variable.
(pthread_cancel_init): Depend in libgcc_s_handle for decision to
load DSO. Assign last.
(__unwind_freeres): New function.
* allocatestack.c (__reclaim_stacks): Reset in_flight_stack later
for better debugging. No need to use stack_list_add here.
only passing five parameters to FUTEX_WAIT_BITSET call.
* sysdeps/unix/sysv/linux/i386/i486/lowlevellock.S
(__lll_timedlock_wait): Use FUTEX_WAIT_BITSET|FUTEX_CLOCK_READTIME
instead of computing relative timeout.
fast path here, for robust/PI/PP mutexes call
__pthread_mutex_lock_full. Don't use switch, instead use a series
of ifs according to their probability.
(__pthread_mutex_lock_full): New function.
* pthread_mutex_unlock.c: Include assert.h.
(__pthread_mutex_unlock_usercnt): Handle only the
fast path here, for robust/PI/PP mutexes call
__pthread_mutex_unlock_full. Don't use switch, instead use a series
of ifs according to their probability.
(__pthread_mutex_unlock_full): New function.
* sysdeps/unix/sysv/linux/pthread_mutex_cond_lock.c
(__pthread_mutex_lock_full): Define.
2008-11-24 Arkadiusz Miśkiewicz <arekm@maven.pl>
* sysdeps/i386/dl-tlsdesc.S (_dl_tlsdesc_dynamic): Use LOAD_PIC_REG
instead of doing things manually.
2008-11-26 Chris Steel <chris.steel.lnx@googlemail.com>
* posix/regex_internal.h (build_wcs_upper_buffer):
Return type is reg_error_t.
ESRCH return value.
(_nss_dns_gethostbyname4_r): Likewise.
* resolv/res_init.c (__res_vinit): Initialize nscount to zero.
* sysdeps/posix/getaddrinfo.c (gaih_inet): In case we use
gethostbyname4_r, we don't have a separate IPv6 status, so copy
the no_data variable.
2008-11-01 Ulrich Drepper <drepper@redhat.com>
[BZ #6955]
* pthread_mutex_lock.c: Add support for private PI mutexes.
* pthread_mutex_timedlock.c: Likewise.
* pthread_mutex_trylock.c: Likewise.
* pthread_mutex_unlock.c: Likewise.
Patch mostly by Ben Jackson <ben@ben.com>.
__libc_clntudp_bufcreate_internal.
* include/sys/socket.h: Declare __have_sock_cloexec.
* socket/Makefile (aux): Add have_sock_cloexec.
* socket/have_sock_cloexec.c: New file.
* sunrpc/clnt_udp.h (clntudp_bufcreate): Now a wrapper around
__libc_clntudp_bufcreate.
(__libc_clntudp_bufcreate): Former implementation of clntudp_bufcreate
which takes an additional parameter. Create socket with non-blocking
mode and close-on-exec flag set, if wanted.
* sunrpc/Versions: Export __libc_clntudp_bufcreate@GLIBC_PRIVATE.
* nis/ypclnt.c (yp_bind_client_create): Use __libc_clntpudp_bufcreate
instead of clntudp_create. The socket has already the close-on-exec
flag set if SOCK_CLOEXEC is defined.
