The audit module itself can be linked with BIND_NOW; it does not
affect its functionality.
This should complete the leftovers from commit
2d6ab5df3b ("Document and fix
--enable-bind-now [BZ #21015]").
Previously, the -Wl,-rpath-link options came after the libraries
injected using LDLIBS-* variables on the link editor command line for
main programs. As a result, it could happen that installed libraries
that reference glibc libraries used the installed glibc from the system
directories, instead of the glibc from the build tree. This can lead to
link failures if the wrong version of libpthread.so.0 is used, for
instance, due to differences in the internal GLIBC_PRIVATE interfaces,
as seen with memusagestat and -lgd after commit
f9b645b4b0 ("memusagestat: use local glibc
when linking [BZ #18465]").
The isolation is necessarily imperfect because these installed
libraries are linked against the installed glibc in the system
directories. However, in most cases, the built glibc will be newer
than the installed glibc, and this link is permitted because of the
ABI backwards compatibility glibc provides.
This change is needed to add linker flags which come very early in the
command linke (before LDFLAGS) and are not applied to test programs
(only to installed programs).
While working on enabling D front-end (GDC) in GCC we noticed that
druntime was segfaulting if it is linked dynamically. This was tracked
to DL_RO_DYN_SECTION.
DL_RO_DYN_SECTION lines seem to be copied from MIPS file (which is the
only user of it), but the comment doesn't apply to RISC-V. There is no
such requirement in RISC-V ABI.
[BZ#24484]
* sysdeps/riscv/ldsodefs.h: Remove DL_RO_DYN_SECTION as it is not
required by RISC-V ABI.
Benchmarks should reflect distribution build policies, so it makes
sense to honor the BIND_NOW configuration for them.
This commit keeps using $(+link-tests), so that the benchmarks are
linked according to the --enable-hardcoded-path-in-tests configure
option.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Commit 2d6ab5df3b ("Document and fix
--enable-bind-now [BZ #21015]") extended BIND_NOW to all installed
shared objects. This change also covers installed programs.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Reduce the total time taken by benchtests. The malloc thread test takes 4
minutes to run which is significantly more than most other tests. Reduce
this to a more reasonable 40 seconds. The math tests take 10 seconds each,
eventhough all they do is loop on the same input. Anything more than 1
second runtime is way overkill, so set the limit to 1 second.
* benchtests/Makefile (BENCH_DURATION): Set to 1 second.
* benchtests/bench-malloc-thread.c (BENCH_DURATION): Set to 10 seconds.
The memusagestat is the only binary that has its own link line which
causes it to be linked against the existing installed C library. It
has been this way since it was originally committed in 1999, but I
don't see any reason as to why. Since we want all the programs we
build locally to be against the new copy of glibc, change the build
to be like all other programs.
Since 9182aa6799 (Fix vDSO l_name for GDB's, BZ#387) the initial link_map
for executable itself and loader will have both l_name and l_libname->name
holding the same value due:
elf/dl-object.c
95 new->l_name = *realname ? realname : (char *) newname->name + libname_len - 1;
Since newname->name points to new->l_libname->name.
This leads to pldd to an infinite call at:
elf/pldd-xx.c
203 again:
204 while (1)
205 {
206 ssize_t n = pread64 (memfd, tmpbuf.data, tmpbuf.length, name_offset);
228 /* Try the l_libname element. */
229 struct E(libname_list) ln;
230 if (pread64 (memfd, &ln, sizeof (ln), m.l_libname) == sizeof (ln))
231 {
232 name_offset = ln.name;
233 goto again;
234 }
Since the value at ln.name (l_libname->name) will be the same as previously
read. The straightforward fix is just avoid the check and read the new list
entry.
I checked also against binaries issues with old loaders with fix for BZ#387,
and pldd could dump the shared objects.
Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu, and
powerpc64le-linux-gnu.
[BZ #18035]
* elf/Makefile (tests-container): Add tst-pldd.
* elf/pldd-xx.c: Use _Static_assert in of pldd_assert.
(E(find_maps)): Avoid use alloca, use default read file operations
instead of explicit LFS names, and fix infinite loop.
* elf/pldd.c: Explicit set _FILE_OFFSET_BITS, cleanup headers.
(get_process_info): Use _Static_assert instead of assert, use default
directory operations instead of explicit LFS names, and free some
leadek pointers.
* elf/tst-pldd.c: New file.
Remove do_set_mallopt_check prototype since it is unused.
* malloc/arena.c (do_set_mallopt_check): Removed.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: DJ Delorie <dj@redhat.com>
As discussed previously on libc-alpha [1], this patch follows up the idea
and add both the __attribute_alloc_size__ on malloc functions (malloc,
calloc, realloc, reallocarray, valloc, pvalloc, and memalign) and limit
maximum requested allocation size to up PTRDIFF_MAX (taking into
consideration internal padding and alignment).
This aligns glibc with gcc expected size defined by default warning
-Walloc-size-larger-than value which warns for allocation larger than
PTRDIFF_MAX. It also aligns with gcc expectation regarding libc and
expected size, such as described in PR#67999 [2] and previously discussed
ISO C11 issues [3] on libc-alpha.
From the RFC thread [4] and previous discussion, it seems that consensus
is only to limit such requested size for malloc functions, not the system
allocation one (mmap, sbrk, etc.).
The implementation changes checked_request2size to check for both overflow
and maximum object size up to PTRDIFF_MAX. No additional checks are done
on sysmalloc, so it can still issue mmap with values larger than
PTRDIFF_T depending on the requested size.
The __attribute_alloc_size__ is for functions that return a pointer only,
which means it cannot be applied to posix_memalign (see remarks in GCC
PR#87683 [5]). The runtimes checks to limit maximum requested allocation
size does applies to posix_memalign.
Checked on x86_64-linux-gnu and i686-linux-gnu.
[1] https://sourceware.org/ml/libc-alpha/2018-11/msg00223.html
[2] https://gcc.gnu.org/bugzilla//show_bug.cgi?id=67999
[3] https://sourceware.org/ml/libc-alpha/2011-12/msg00066.html
[4] https://sourceware.org/ml/libc-alpha/2018-11/msg00224.html
[5] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=87683
[BZ #23741]
* malloc/hooks.c (malloc_check, realloc_check): Use
__builtin_add_overflow on overflow check and adapt to
checked_request2size change.
* malloc/malloc.c (__libc_malloc, __libc_realloc, _mid_memalign,
__libc_pvalloc, __libc_calloc, _int_memalign): Limit maximum
allocation size to PTRDIFF_MAX.
(REQUEST_OUT_OF_RANGE): Remove macro.
(checked_request2size): Change to inline function and limit maximum
requested size to PTRDIFF_MAX.
(__libc_malloc, __libc_realloc, _int_malloc, _int_memalign): Limit
maximum allocation size to PTRDIFF_MAX.
(_mid_memalign): Use _int_memalign call for overflow check.
(__libc_pvalloc): Use __builtin_add_overflow on overflow check.
(__libc_calloc): Use __builtin_mul_overflow for overflow check and
limit maximum requested size to PTRDIFF_MAX.
* malloc/malloc.h (malloc, calloc, realloc, reallocarray, memalign,
valloc, pvalloc): Add __attribute_alloc_size__.
* stdlib/stdlib.h (malloc, realloc, reallocarray, valloc): Likewise.
* malloc/tst-malloc-too-large.c (do_test): Add check for allocation
larger than PTRDIFF_MAX.
* malloc/tst-memalign.c (do_test): Disable -Walloc-size-larger-than=
around tests of malloc with negative sizes.
* malloc/tst-posix_memalign.c (do_test): Likewise.
* malloc/tst-pvalloc.c (do_test): Likewise.
* malloc/tst-valloc.c (do_test): Likewise.
* malloc/tst-reallocarray.c (do_test): Replace call to reallocarray
with resulting size allocation larger than PTRDIFF_MAX with
reallocarray_nowarn.
(reallocarray_nowarn): New function.
* NEWS: Mention the malloc function semantic change.
This patch just refactor the assembly implementation to use compiler
builtins instead.
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/fpu/s_fma.S: Remove file.
* sysdeps/powerpc/fpu/s_fmaf.S: Likewise.
* sysdeps/powerpc/fpu/s_fma.c: New file.
* sysdeps/powerpc/fpu/s_fmaf.c: Likewise.
Since be2e25bbd7 the generic ieee754 implementation uses
compiler builtin which generates fabs{f} for all supported targets.
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/fpu/s_fabs.S: Remove file.
* sysdeps/powerpc/fpu/s_fabsf.S: Likewise.
Similar to powerpc, mips also issues rt_sigreturn for setcontext
case the v0 value saved is not the one set by setcontext or
makecontext. As for powerpc, it is intention is no really supported
since setcontext is not async-signal-safe.
Checked the context tests on mips64-linux-gnu and mips-linux-gnu.
* sysdeps/unix/sysv/linux/mips/getcontext.S (__getcontext): Remove
the magic flag store.
* sysdeps/unix/sysv/linux/mips/makecontext.S (__makecontext):
Likewise.
* sysdeps/unix/sysv/linux/mips/swapcontext.S (__swapcontext):
Likewise.
* sysdeps/unix/sysv/linux/mips/setcontext.S (__setcontext):
Remove rt_sigreturn call.
As described in a recent glibc thread [1], the rt_sigreturn syscall
on setcontext and swapcontext is not used on default use and its
intention is no really supported since neither setcontext nor
swapcontext are async-signal-safe.
Checked on powerpc64-linux-gnu and powerpc-linux-gnu.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/setcontext-common.S:
Remove rt_sigreturn call.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/swapcontext-common.S:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/setcontext.S: Likewie.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/swapcontext.S: Likewise.
[1] https://sourceware.org/ml/libc-alpha/2019-02/msg00367.html
Its API is similar to support_capture_subprocess, but rather creates a
new process based on the input path and arguments. Under the hoods it
uses posix_spawn to create the new process.
It also allows the use of other support_capture_* functions to check
for expected results and free the resources.
Checked on x86_64-linux-gnu.
* support/Makefile (libsupport-routines): Add support_subprocess,
xposix_spawn, xposix_spawn_file_actions_addclose, and
xposix_spawn_file_actions_adddup2.
(tst-support_capture_subprocess-ARGS): New rule.
* support/capture_subprocess.h (support_capture_subprogram): New
prototype.
* support/support_capture_subprocess.c (support_capture_subprocess):
Refactor to use support_subprocess and support_capture_poll.
(support_capture_subprogram): New function.
* support/tst-support_capture_subprocess.c (write_mode_to_str,
str_to_write_mode, test_common, parse_int, handle_restart,
do_subprocess, do_subprogram, do_multiple_tests): New functions.
(do_test): Add support_capture_subprogram tests.
* support/subprocess.h: New file.
* support/support_subprocess.c: Likewise.
* support/xposix_spawn.c: Likewise.
* support/xposix_spawn_file_actions_addclose.c: Likewise.
* support/xposix_spawn_file_actions_adddup2.c: Likewise.
* support/xspawn.h: Likewise.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This test would fail unnecessarily if the user running it had more than
64 groups since getgroups returns EINVAL if the size provided is less
than the number of supplementary group IDs. Instead dynamically
determine the number of supplementary groups the user has.
The purpose of the bp[0] == '.' check is unclear. Only the root domain
starts with '.'. The empty string is accepted as a domain name in many
places, denoting the root, but using it implicitly is confusing.
alloc_buffer_next is useful for peeking to the remaining part of the
buffer and update it, with subsequent allocation (once the length
is known) using alloc_buffer_alloc_bytes. This is not as robust
as the other interfaces, but it allows using alloc_buffer with
string-writing interfaces such as snprintf and ns_name_ntop.
If an error occurs during the tracing operation, particularly during a
call to lock_and_info() which calls _dl_addr, we may end up calling back
into the malloc-subsystem and relock the loader lock and deadlock. For
all intents and purposes the call to _dl_addr can call any of the malloc
family API functions and so we should disable all tracing before calling
such loader functions. This is similar to the strategy that the new
malloc tracer takes when calling the real malloc, namely that all
tracing ceases at the boundary to the real function and any faults at
that point are the purvue of the library (though the new tracer does
this on a per-thread basis in an MT-safe fashion). Since the new tracer
and the hook deprecation are not yet complete we must fix these issues
where we can.
Tested on x86_64 with no regressions.
Co-authored-by: Kwok Cheung Yeung <kcy@codesourcery.com>
Reviewed-by: DJ Delorie <dj@redhat.com>
Replace slow byte-oriented tests in several string benchmarks with the
generic implementations from the string/ directory so the comparisons
are more realistic and useful.
* benchtests/bench-stpcpy.c (SIMPLE_STPCPY): Remove function.
(generic_stpcpy): New function.
* benchtests/bench-stpncpy.c (SIMPLE_STPNCPY): Remove function.
(generic_stpncpy): New function.
* benchtests/bench-strcat.c (SIMPLE_STRCAT): Remove function.
(generic_strcat): New function.
* benchtests/bench-strcpy.c (SIMPLE_STRCPY): Remove function.
(generic_strcpy): New function.
* benchtests/bench-strncat.c (SIMPLE_STRNCAT): Remove function.
(STUPID_STRNCAT): Remove function.
(generic_strncat): New function.
* benchtests/bench-strncpy.c (SIMPLE_STRNCPY): Remove function.
(STUPID_STRNCPY): Remove function.
(generic_strncpy): New function.
* benchtests/bench-strnlen.c (SIMPLE_STRNLEN): Remove function.
(generic_strnlen): New function.
(memchr_strnlen): New function.
* benchtests/bench-strlen.c (generic_strlen): Define for WIDE.
(memchr_strlen): Likewise.
Improve bench-strstr by using an extract from the manual as the input
to make the test more realistic. Use the same input for both found and
fail cases rather than using a memset of '0' for most of the string,
which measures performance of strchr rather than strstr. Add result
checking to catch potential errors. Remove the repeated tests at slightly
different alignments and add more large needle and haystack testcases.
Replace stupid_strstr with an efficient basic implementation. Add the
Two-way implementation to simplify comparisons with much faster generic
implementations.
* benchtests/bench-strstr.c (input): Add realistic input text.
(stupid_strstr): Remove function.
(basic_strstr): Add function.
(twoway_strstr): Add function.
(do_one_test): Add result checking.
(do_test): Use new input text. Remove accidental early matches.
(test_main): Improve range of tests, reduce unaligned cases.
Improve bench-memmem by replacing simple_memmem with a more efficient
implementation. Add the Two-way implementation to enable direct comparison
with the optimized memmem.
* benchtests/bench-memmem.c (simple_memmem): Remove function.
(basic_memmem): Add function.
(twoway_memmem): Add function.
This functionality was deprecated in glibc 2.25.
This commit only includes the core changes to remove the
functionality. It does not remove the RES_USE_INET6 handling in the
individual NSS service modules and the res_use_inet6 function.
These changes will happen in future commits.
Here is the updated patch for improving the long unaligned
code path (the one using "ext" instruction).
1. Always taken conditional branch at the beginning is
removed.
2. Epilogue code is placed after the end of the loop to
reduce the number of branches.
3. The redundant "mov" instructions inside the loop are
gone due to the changed order of the registers in the "ext"
instructions inside the loop, the prologue has additional
"ext" instruction.
4.Updating count in the prologue was hoisted out as
it is the same update for each prologue.
5. Invariant code of the loop epilogue was hoisted out.
6. As the current size of the ext chunk is exactly 16
instructions long "nop" was added at the beginning
of the code sequence so that the loop entry for all the
chunks be aligned.
* sysdeps/aarch64/multiarch/memcpy_thunderx2.S: Cleanup branching
and remove redundant code.
This allows an architecture to set explicit loop unrolling.
Checked on aarch64-linux-gnu.
* wcsmbs/wcsrchr.c (WCSRCHR): Use loop_unroll.h to parametrize
the loop unroll.
This allows an architecture to set explicit loop unrolling.
Checked on aarch64-linux-gnu.
* wcsmbs/wcschr.c (WCSCHR): Use loop_unroll.h to parametrize
the loop unroll.
This allows an architecture to use the old generic implementation
and also set explicit loop unrolling.
Checked on aarch64-linux-gnu.
* include/loop_unroll.h: New file.
* wcsmbs/wcscpy (__wcscpy): Add option to use loop unrolling
besides generic implementation.
snprintf will only truncate the output if the data its given
is corrupted, but a truncated buffer will not match the
"pristine" data's buffer, which is all we need. So just
disable the warning via the DIAG macros.
The Japanese era name will be changed on May 1, 2019. The Japanese
government made a preliminary announcement on April 1, 2019.
The glibc ja_JP locale must be updated to include the new era name for
strftime's alternative year format support.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
ChangeLog:
[BZ #22964]
* localedata/locales/ja_JP (LC_TIME): Add entry for the new Japanese
era.
* time/tst-strftime2.c (dates): Add 2019-04-30 and 2019-05-01.
(mkreftable): Add rules for the new Japanese era and the new dates.
Co-authored-by: Rafal Luzynski <digitalfreak@lingonborough.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
ChangeLog:
[BZ #24293]
* time/Makefile (LOCALES): Add zh_TW.UTF-8, cmn_TW.UTF-8,
hak_TW.UTF-8, nan_TW.UTF-8, and lzh_TW.UTF-8.
* time/tst-strftime2.c (locales): Likewise.
(dates): Add 1910-04-01, 1911-12-31, 1912-01-01, 1913-04-01,
2010-04-01, and 2011-04-01.
(mkreftable): Add rules for the new locales and the new dates.
Express the years as full Gregorian years (e.g., 1988 instead of 88)
and months with natural numbers (1-12 rather than 0-11).
Compare actual dates rather than indexes when selecting the era name.
Declare the local variable era as a string character pointer rather
than an array of chars where the actual string is copied which might
lead to potential buffer overflows in future.
Co-authored-by: Rafal Luzynski <digitalfreak@lingonborough.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
ChangeLog:
* time/tst-strftime2.c (date_t): Explicitly define the type.
(dates): Use natural month and year numbers to express a date.
(is_before): New function to compare dates.
(mkreftable): Minor improvements to simplify maintenance.
(do_test): Reflect the changes in dates array.
Test the transition points between all the currently listed Japanese
era name changes. This includes testing the transition between the
first year date and the second year date. This test will help test
the upcoming Japanese era name change.
Also fixes a fencepost error where the era name isn't properly parsed
by strptime in the last (partial) year of the era.
Example: if an era change happens in Feb 1990, and again in Aug 1995,
that's 5.5 years long, but the 0.5 year wasn't accounted for.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* sysdeps/alpha/divqu.S (__divqu): Move save of $f0 and excb after
conditional branch to DIVBYZERO. Fix unwind info.
* sysdeps/alpha/remqu.S (__remqu): Move saves of $f0, $f1, $f2 and
excb after conditional branch to $powerof2. Add missing unop
instructions and .align directives and reorder instructions to
match __divqu.
Signed-off-by: Uroš Bizjak <ubizjak@gmail.com>
Fixes build using v5.1-rc1 headers.
The kernel has cleaned up how these are defined. Previous behavior
was to define __NR_osf_shmat as 209 and not define __NR_shmat.
Current behavior is to define __NR_shmat as 209 and then define
__NR_osf_shmat as __NR_shmat.
* sysdeps/unix/sysv/linux/alpha/kernel-features.h (__NR_shmat):
Do not redefine.
* sysdeps/unix/sysv/linux/alpha/sysdep.h (__NR_osf_shmat):
Do not redefine.
Fix a:
.../sysdeps/unix/sysv/linux/riscv/configure: line 181: test: =: unary operator expected
message produced by the RISC-V configure fragment with the soft-float
ABI selected, caused by $libc_cv_riscv_float_abi evaluating to nil in
the invocation of `test $libc_cv_riscv_float_abi = no'.
* sysdeps/unix/sysv/linux/riscv/configure.ac: Quote
$libc_cv_riscv_float_abi in `test' invocation.
* sysdeps/unix/sysv/linux/riscv/configure: Regenerate.
Replace inline asm uses of the "mffs" and "mtfsf" instructions with
the analogous GCC builtins.
__builtin_mffs and __builtin_mtfsf are both available in GCC 5 and above.
Given the minimum GCC level for GLibC is now GCC 6.2, it is safe to use
these builtins without restriction.
2019-03-29 Paul A. Clarke <pc@us.ibm.com>
* sysdeps/powerpc/fpu/fenv_libc.h (fegetenv_register): Replace inline
asm with builtin.
* sysdeps/powerpc/powerpc64/le/fpu/sfp-machine.h (FP_INIT_ROUNDMODE):
Likewise.
* sysdeps/powerpc/fpu/tst-setcontext-fpscr.c (_GET_DI_FPSCR): Likewise.
(_GET_SI_FPSCR): Likewise.
(_SET_SI_FPSCR): Likewise.
This patch enable the builtin usage for clang for the C99 functions
fpclassify, isfinite, isnormal, isnan, isinf, and sigbit. This allows
clang optimize the calls on frontend instead of call the appropriate
glibc symbols.
Checked on aarch64-linux-gnu and x86_64-linux-gnu. I checked the supported
version for each builtin based on released version from clang/llvm.
* math/math.h (fpclassify, isfinite, isnormal, isnan): Use builtin for
clang 2.8.
(signbit): Use builtin for clang 3.3.
(isinf): Use builtin for clang 3.7.
This file is not used anywhere since removal of {k,e}_rem_pio2f.c
(commit ca3aac57ef).
Checked with a build for powerpc-linux-gnu (with --with-cpu=power4
and --with-cpu=power7), powerpc64-linux-gnu (with --with-cpu=power4
and --with-cpu=power7), and powerpc64le-linux (with --with-cpu=power8).
* sysdeps/powerpc/fpu/s_float_bitwise.h: Remove file.
Checked on x86_64-linux-gnu and i686-linux-gnu.
* nptl/tst-sem5.c: Remove unused headers. Add <support/check.h>.
(do_test) Use libsupport test macros rather than hand-coded
conditionals and error messages. Ensure that sem_init returns zero
rather than not -1. Use <support/test-driver.c> rather than
test-skeleton.c.
* nptl/tst-sem13.c: Add <support/check.h>. (do_test) Use libsupport
test macros rather than hand-coded conditionals and error messages.
Use <support/test-driver.c> rather than test-skeleton.c.
Add missing generic hp_timing support. It uses clock_gettime (CLOCK_MONOTONIC)
which has unspecified starting time, nano-second accuracy, and should faster on
architectures that implementes the symbol as vDSO.
Checked on aarch64-linux-gnu, x86_64-linux-gnu, and i686-linux-gnu. I also
checked the builds for all afected ABIs.
* benchtests/Makefile (USE_CLOCK_GETTIME) Remove.
* benchtests/README: Update description.
* benchtests/bench-timing.h: Default to hp-timing.
* sysdeps/generic/hp-timing.h (HP_TIMING_DIFF, HP_TIMING_ACCUM_NT,
HP_TIMING_PRINT): Remove.
(HP_TIMING_NOW): Add generic implementation.
(hp_timing_t): Change to uint64_t.
This patch refactor how hp-timing is used on loader code for statistics
report. The HP_TIMING_AVAIL and HP_SMALL_TIMING_AVAIL are removed and
HP_TIMING_INLINE is used instead to check for hp-timing avaliability.
For alpha, which only defines HP_SMALL_TIMING_AVAIL, the HP_TIMING_INLINE
is set iff for IS_IN(rtld).
Checked on aarch64-linux-gnu, x86_64-linux-gnu, and i686-linux-gnu. I also
checked the builds for all afected ABIs.
* benchtests/bench-timing.h: Replace HP_TIMING_AVAIL with
HP_TIMING_INLINE.
* nptl/descr.h: Likewise.
* elf/rtld.c (RLTD_TIMING_DECLARE, RTLD_TIMING_NOW, RTLD_TIMING_DIFF,
RTLD_TIMING_ACCUM_NT, RTLD_TIMING_SET): Define.
(dl_start_final_info, _dl_start_final, dl_main, print_statistics):
Abstract hp-timing usage with RTLD_* macros.
* sysdeps/alpha/hp-timing.h (HP_TIMING_INLINE): Define iff IS_IN(rtld).
(HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL): Remove.
* sysdeps/generic/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL,
HP_TIMING_NONAVAIL): Likewise.
* sysdeps/ia64/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL):
Likewise.
* sysdeps/powerpc/powerpc32/power4/hp-timing.h (HP_TIMING_AVAIL,
HP_SMALL_TIMING_AVAIL): Likewise.
* sysdeps/powerpc/powerpc64/hp-timing.h (HP_TIMING_AVAIL,
HP_SMALL_TIMING_AVAIL): Likewise.
* sysdeps/sparc/sparc32/sparcv9/hp-timing.h (HP_TIMING_AVAIL,
HP_SMALL_TIMING_AVAIL): Likewise.
* sysdeps/sparc/sparc64/hp-timing.h (HP_TIMING_AVAIL,
HP_SMALL_TIMING_AVAIL): Likewise.
* sysdeps/x86/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL):
Likewise.
* sysdeps/generic/hp-timing-common.h: Update comment with
HP_TIMING_AVAIL removal.
This patch removes the HP_TIMING_BITS usage for fast random bits and replace
with clock_gettime (CLOCK_MONOTONIC). It has unspecified starting time and
nano-second accuracy, so its randomness is significantly better than
gettimeofday.
Althoug it should incur in more overhead (specially for architecture that
support hp-timing), the symbol is also common implemented as a vDSO.
Checked on aarch64-linux-gnu, x86_64-linux-gnu, and i686-linux-gnu. I also
checked on a i686-gnu build.
* include/random-bits.h: New file.
* resolv/res_mkquery.c [HP_TIMING_AVAIL] (RANDOM_BITS,
(__res_context_mkquery): Remove usage hp-timing usage and replace with
random_bits.
* resolv/res_send.c [HP_TIMING_AVAIL] (nameserver_offset): Likewise.
* sysdeps/posix/tempname.c [HP_TIMING_AVAIL] (__gen_tempname):
Likewise.
With clock_getres, clock_gettime, and clock_settime refactor to remove the
generic CLOCK_PROCESS_CPUTIME_ID and CLOCK_THREAD_CPUTIME_ID support through
hp-timing, there is no usage of internal __get_clockfreq. This patch removes
both generic and Linux implementation..
Checked with a build against aarch64-linux-gnu, i686-linux-gnu, ia64-linux-gnu,
sparc64-linux-gnu, powerpc-linux-gnu-power4.
* include/libc-internal.h (__get_clockfreq): Remove prototype.
* rt/Makefile (clock-routines): Remove get_clockfreq.
* rt/get_clockfreq.c: Remove file.
* sysdeps/unix/sysv/linux/i386/get_clockfreq.c: Likewise.
* sysdeps/unix/sysv/linux/ia64/get_clockfreq.c: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/get_clockfreq.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/get_clockfreq.c: Move code to ...
* sysdeps/unix/sysv/linux/powerpc/get_timebase_freq.c: ... here.
The Linux 3.2 clock_getres kernel code (kernel/posix-cpu-timers.c)
issued for clock_getres CLOCK_PROCESS_CPUTIME_ID (process_cpu_clock_getres)
and CLOCK_THREAD_CPUTIME_ID (thread_cpu_clock_getres) call
posix_cpu_clock_getres. And it fails on check_clock only if an invalid
clock is used (not the case) or if we pass an invalid the pid/tid in
29 msb of clock_id (not the case either).
This patch assumes that clock_getres syscall always support
CLOCK_PROCESS_CPUTIME_ID and CLOCK_THREAD_CPUTIME_ID, so there is no need
to fallback to hp-timing support for _SC_MONOTONIC_CLOCK neither to issue
the syscall to certify the clock_id is supported bt the kernel. This
allows simplify the sysconf support to always use the syscall.
it also removes ia64 itc drift check and assume kernel handles it correctly.
Checked on aarch64-linux-gnu, x86_64-linux-gnu, and i686-linux-gnu.
* sysdeps/unix/sysv/linux/ia64/has_cpuclock.c: Remove file.
* sysdeps/unix/sysv/linux/ia64/sysconf.c: Likewise.
* sysdeps/unix/sysv/linux/sysconf.c (has_cpuclock): Remove function.
(__sysconf): Assume kernel support for _SC_MONOTONIC_CLOCK,
_SC_CPUTIME, and _SC_THREAD_CPUTIME.
This patch removes CLOCK_THREAD_CPUTIME_ID and CLOCK_PROCESS_CPUTIME_ID support
from clock_gettime and clock_settime generic implementation. For Linux, kernel
already provides supports through the syscall and Hurd HTL lacks
__pthread_clock_gettime and __pthread_clock_settime internal implementation.
As described in clock_gettime man-page [1] on 'Historical note for SMP
system', implementing CLOCK_{THREAD,PROCESS}_CPUTIME_ID with timer registers
is error-prone and susceptible to timing and accurary issues that the libc
can not deal without kernel support.
This allows removes unused code which, however, still incur in some runtime
overhead in thread creation (the struct pthread cpuclock_offset
initialization).
If hurd eventually wants to support them it should either either implement as
a kernel facility (or something related due its architecture) or in system
specific implementation.
Checked on aarch64-linux-gnu, x86_64-linux-gnu, and i686-linux-gnu. I also
checked on a i686-gnu build.
* nptl/Makefile (libpthread-routines): Remove pthread_clock_gettime and
pthread_clock_settime.
* nptl/pthreadP.h (__find_thread_by_id): Remove prototype.
* elf/dl-support.c [!HP_TIMING_NOAVAIL] (_dl_cpuclock_offset): Remove.
(_dl_non_dynamic_init): Remove _dl_cpuclock_offset setting.
* elf/rtld.c (_dl_start_final): Likewise.
* nptl/allocatestack.c (__find_thread_by_id): Remove function.
* sysdeps/generic/ldsodefs.h [!HP_TIMING_NOAVAIL] (_dl_cpuclock_offset):
Remove.
* sysdeps/mach/hurd/dl-sysdep.c [!HP_TIMING_NOAVAIL]
(_dl_cpuclock_offset): Remove.
* nptl/descr.h (struct pthread): Rename cpuclock_offset to
cpuclock_offset_ununsed.
* nptl/nptl-init.c (__pthread_initialize_minimal_internal): Remove
cpuclock_offset set.
* nptl/pthread_create.c (START_THREAD_DEFN): Likewise.
* sysdeps/nptl/fork.c (__libc_fork): Likewise.
* nptl/pthread_clock_gettime.c: Remove file.
* nptl/pthread_clock_settime.c: Likewise.
* sysdeps/unix/clock_gettime.c (hp_timing_gettime): Remove function.
[HP_TIMING_AVAIL] (realtime_gettime): Remove CLOCK_THREAD_CPUTIME_ID
and CLOCK_PROCESS_CPUTIME_ID support.
* sysdeps/unix/clock_settime.c (hp_timing_gettime): Likewise.
[HP_TIMING_AVAIL] (realtime_gettime): Likewise.
* sysdeps/posix/clock_getres.c (hp_timing_getres): Likewise.
[HP_TIMING_AVAIL] (__clock_getres): Likewise.
* sysdeps/unix/clock_nanosleep.c (CPUCLOCK_P, INVALID_CLOCK_P):
Likewise.
(__clock_nanosleep): Remove CPUCLOCK_P and INVALID_CLOCK_P usage.
[1] http://man7.org/linux/man-pages/man2/clock_gettime.2.html
This patch introduces the new arch13 ifunc variant for memmem.
For needles longer than 9 bytes it is relying on the common-code
implementation. For shorter needles it is using the new vstrs instruction
which is able to search a substring within a vector register.
ChangeLog:
* sysdeps/s390/Makefile (sysdep_routines): Add memmem-arch13.
* sysdeps/s390/ifunc-memmem.h (HAVE_MEMMEM_ARCH13, MEMMEM_ARCH13,
MEMMEM_Z13_ONLY_USED_AS_FALLBACK, HAVE_MEMMEM_IFUNC_AND_ARCH13_SUPPORT):
New defines.
* sysdeps/s390/memmem-arch13.S: New file.
* sysdeps/s390/memmem-vx.c: Omit GI symbol for z13 memmem ifunc variant
if it is only used as fallback.
* sysdeps/s390/memmem.c (memmem): Add arch13 variant in ifunc selector.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add ifunc variant for arch13 memmem.
This patch introduces the new arch13 ifunc variant for strstr.
For needles longer than 9 charachters it is relying on the common-code
implementation. For shorter needles it is using the new vstrs instruction
which is able to search a substring within a vector register.
ChangeLog:
* sysdeps/s390/Makefile (sysdep_routines): Add strstr-arch13.
* sysdeps/s390/ifunc-strstr.h (HAVE_STRSTR_ARCH13, STRSTR_ARCH13,
STRSTR_Z13_ONLY_USED_AS_FALLBACK, HAVE_STRSTR_IFUNC_AND_ARCH13_SUPPORT):
New defines.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add ifunc variant for arch13 strstr.
* sysdeps/s390/strstr-arch13.S: New file.
* sysdeps/s390/strstr-vx.c: Omit GI symbol for z13 strstr ifunc variant
if it is only used as fallback.
* sysdeps/s390/strstr.c (strstr): Add arch13 variant in ifunc selector.
This patch introduces the new arch13 ifunc variant for memmove.
For the forward or non-overlapping case it is just using memcpy.
For the backward case it relies on the new instruction mvcrl.
The instruction copies up to 256 bytes at once.
In case of an overlap, it copies the bytes like copying them
one by one starting from right to left.
ChangeLog:
* sysdeps/s390/ifunc-memcpy.h (HAVE_MEMMOVE_ARCH13, MEMMOVE_ARCH13
HAVE_MEMMOVE_IFUNC_AND_ARCH13_SUPPORT): New defines.
* sysdeps/s390/memcpy-z900.S: Add arch13 memmove implementation.
* sysdeps/s390/memmove.c (memmove): Add arch13 variant in
ifunc selector.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add ifunc variant for arch13 memmove.
* sysdeps/s390/multiarch/ifunc-resolve.h (S390_STFLE_BITS_ARCH13_MIE3,
S390_IS_ARCH13_MIE3): New defines.
Add two configure checks which detect if arch13 is supported
by the assembler at all - by explicitely setting the machine -
and if it is supported with default settings.
ChangeLog:
* config.h.in (HAVE_S390_MIN_ARCH13_ZARCH_ASM_SUPPORT,
HAVE_S390_ARCH13_ASM_SUPPORT): New undefine.
* sysdeps/s390/configure.ac: Add checks for arch13 support.
* sysdeps/s390/configure: Regenerated.
When -Werror=parentheses is in use, iconvconfig.c builds fail with:
iconvconfig.c: In function ‘write_output’:
iconvconfig.c:1084:34: error: suggest parentheses around ‘+’ inside ‘>>’ [-Werror=parentheses]
hash_size = next_prime (nnames + nnames >> 1);
~~~~~~~^~~~~~~~
This patch adds parentheses to the expression. Not where suggested by
the compiler warning, but where it produces the expected result, i.e.:
where it has the effect of multiplying nnames by 1.5.
Likewise for elem_size in ld-collate.c.
Tested for powerpc64le.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Two cases of "int * 1.4" may result in imprecise results, which
in at least one case resulted in i686 and x86-64 producing
different locale files. This replaced that floating point multiply
with integer operations. While the hash table margin is increased
from 40% to 50%, testing shows only 2% increase in overall size
of the locale archive.
https://bugzilla.redhat.com/show_bug.cgi?id=1311954
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This patch adds vx and vxe as important hwcaps
which allows one to provide shared libraries
tuned for platforms with non-vx/-vxe, vx or vxe.
ChangeLog:
* sysdeps/s390/dl-procinfo.h (HWCAP_IMPORTANT):
Add HWCAP_S390_VX and HWCAP_S390_VXE.
This commit fixes some errors and converts all weekday names to lowercase.
The content is synchronized with CLDR-34 now, but trailing dots are removed
from abday values in order to maintain consistency with the previous values
and with many other locales which do the same.
[BZ #24296]
* localedata/locales/tt_RU (day): Update from CLDR-34, fix errors.
(abday): Likewise, but remove the trailing dots.
This patch adds new AArch64 HWCAPs from Linux 5.0 to the AArch64
bits/hwcap.h and dl-procinfo.c.
Tested (compilation only) with build-many-glibcs.py for
aarch64-linux-gnu.
* sysdeps/unix/sysv/linux/aarch64/bits/hwcap.h (HWCAP_SB): New
macro.
(HWCAP_PACA): Likewise.
(HWCAP_PACG): Likewise.
* sysdeps/unix/sysv/linux/aarch64/dl-procinfo.c (_DL_HWCAP_COUNT):
Increase to 32.
(_dl_aarch64_cap_flags): Add new entries for new HWCAPs.
This patch updates sysdeps/unix/sysv/linux/syscall-names.list for
Linux 5.0. Based on testing with build-many-glibcs.py, the only new
entry needed is for old_getpagesize (a newly added __NR_* name for an
old syscall on ia64). (Because 5.0 changes how syscall tables are
handled in the kernel, checking diffs wasn't a useful way of looking
for new syscalls in 5.0 as most of the syscall tables were moved to
the new representation without actually adding any syscalls to them.)
Tested with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/syscall-names.list: Update kernel
version to 5.0.
(old_getpagesize): New syscall.
Minguo calendar is the official calendar system, and very widely used in
Taiwan. This commit adds its support into glibc.
Some background information: The government website (www.gov.tw) uses it,
popular public services like Taiwan HSR also use this calendar system.
Link to Wikipedia: https://en.wikipedia.org/wiki/Minguo_calendar
[BZ #24293]
* localedata/locales/zh_TW (era): Add, support Minguo calendar.
* localedata/locales/cmn_TW (era): Likewise.
* localedata/locales/hak_TW (era): Likewise.
* localedata/locales/lzh_TW (era): Likewise.
* localedata/locales/nan_TW (era): Likewise.
The stub implementations are turned into compat symbols.
Linux actually has two reserved system call numbers (for getpmsg
and putpmsg), but these system calls have never been implemented,
and there are no plans to implement them, so this patch replaces
the wrappers with the generic stubs.
According to <https://bugzilla.redhat.com/show_bug.cgi?id=436349>,
the presence of the XSI STREAMS declarations is a minor portability
hazard because they are not actually implemented.
This commit does not change the TIRPC support code in
sunrpc/rpc_svcout.c. It uses additional XTI functionality and
therefore never worked with glibc.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Linking to the NSS module directly does not work if the linker defaults
to --as-needed because it will remove the apparently unused DSO
reference and not generate a DT_NEEDED entry. Use an explicit dlopen
call, like in the other chroot tests involving NSS modules.
A few of our installed headers contain UTF-8 in comments.
check-obsolete-constructs opened files without explicitly specifying
their encoding, so it would barf on these headers if “make check” was
run in a non-UTF-8 locale.
* scripts/check-obsolete-constructs.py (HeaderChecker.check):
Specify encoding="utf-8" when opening headers to check.
This patch makes build-many-glibcs.py use Linux 5.0 in place of 4.20
(now that the test change required to avoid false positives with ulong
in kernel headers has been committed). This includes adjusting the
logic to compute a tarball URL to handle different major version
numbers (rather than changing the path to hardcode v5.x in place of
v4.x, as someone might still wish to check out a v4.x version).
Tested that build-many-glibcs.py successfully checks out Linux 5.0
sources after this patch.
* scripts/build-many-glibcs.py (Context.checkout): Default Linux
version to 5.0.
(Context.checkout_tar): Handle variable major version for Linux
kernel.
Mach does not support IP_RECVERR, so replace this function with a
stub in a sysdeps override for Hurd.
This fixes commit 08504de718
("resolv: Enable full ICMP errors for UDP DNS sockets [BZ #24047]").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
inttypes.h and stdint.h are in sysdeps/generic, but there are no other
versions of these headers anywhere in the source tree, so they aren’t
actually system-dependent. Move them to the subdirectory that
installs them (stdlib).
Reviewed-by: Joseph Myers <joseph@codesourcery.com>
* sysdeps/generic/inttypes.h, sysdeps/generic/stdint.h:
Move to stdlib.
* include/inttypes.h: Adjust to match.
* include/stdint.h: New wrapper.
The test for obsolete typedefs in installed headers was implemented
using grep, and could therefore get false positives on e.g. “ulong”
in a comment. It was also scanning all of the headers included by
our headers, and therefore testing headers we don’t control, e.g.
Linux kernel headers.
This patch splits the obsolete-typedef test from
scripts/check-installed-headers.sh to a separate program,
scripts/check-obsolete-constructs.py. Being implemented in Python,
it is feasible to make it tokenize C accurately enough to avoid false
positives on the contents of comments and strings. It also only
examines $(headers) in each subdirectory--all the headers we install,
but not any external dependencies of those headers. Headers whose
installed name starts with finclude/ are ignored, on the assumption
that they contain Fortran.
It is also feasible to make the new test understand the difference
between _defining_ the obsolete typedefs and _using_ the obsolete
typedefs, which means posix/{bits,sys}/types.h no longer need to be
exempted. This uncovered an actual bug in bits/types.h: __quad_t and
__u_quad_t were being used to define __S64_TYPE, __U64_TYPE,
__SQUAD_TYPE and __UQUAD_TYPE. These are changed to __int64_t and
__uint64_t respectively. This is a safe change, despite the comments
in bits/types.h claiming a difference between __quad_t and __int64_t,
because those comments are incorrect. In all current ABIs, both
__quad_t and __int64_t are ‘long’ when ‘long’ is a 64-bit type, and
‘long long’ when ‘long’ is a 32-bit type, and similarly for __u_quad_t
and __uint64_t. (Changing the types to be what the comments say they
are would be an ABI break, as it affects C++ name mangling.) This
patch includes a minimal change to make the comments not completely
wrong.
sys/types.h was defining the legacy BSD u_intN_t typedefs using a
construct that was not necessarily consistent with how the C99 uintN_t
typedefs are defined, and is also too complicated for the new script to
understand (it lexes C relatively accurately, but it does not attempt
to expand preprocessor macros, nor does it do any actual parsing).
This patch cuts all of that out and uses bits/types.h's __uintN_t typedefs
to define u_intN_t instead. This is verified to not change the ABI on
any supported architecture, via the c++-types test, which means u_intN_t
and uintN_t were, in fact, consistent on all supported architectures.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* scripts/check-obsolete-constructs.py: New test script.
* scripts/check-installed-headers.sh: Remove tests for
obsolete typedefs, superseded by check-obsolete-constructs.py.
* Rules: Run scripts/check-obsolete-constructs.py over $(headers)
as a special test. Update commentary.
* posix/bits/types.h (__SQUAD_TYPE, __S64_TYPE): Define as __int64_t.
(__UQUAD_TYPE, __U64_TYPE): Define as __uint64_t.
Update commentary.
* posix/sys/types.h (__u_intN_t): Remove.
(u_int8_t): Typedef using __uint8_t.
(u_int16_t): Typedef using __uint16_t.
(u_int32_t): Typedef using __uint32_t.
(u_int64_t): Typedef using __uint64_t.
Starting with commit 1616d034b6
the output was corrupted on some platforms as _dl_procinfo
was called for every auxv entry and on some architectures like s390
all entries were represented as "AT_HWCAP".
This patch is removing the condition and let _dl_procinfo decide if
an entry is printed in a platform specific or generic way.
This patch also adjusts all _dl_procinfo implementations which assumed
that they are only called for AT_HWCAP or AT_HWCAP2. They are now just
returning a non-zero-value for entries which are not handled platform
specifc.
ChangeLog:
* elf/dl-sysdep.c (_dl_show_auxv): Remove condition and always
call _dl_procinfo.
* sysdeps/unix/sysv/linux/s390/dl-procinfo.h (_dl_procinfo):
Ignore types other than AT_HWCAP.
* sysdeps/sparc/dl-procinfo.h (_dl_procinfo): Likewise.
* sysdeps/unix/sysv/linux/i386/dl-procinfo.h (_dl_procinfo):
Likewise.
* sysdeps/powerpc/dl-procinfo.h (_dl_procinfo): Adjust comment
in the case of falling back to generic output mechanism.
* sysdeps/unix/sysv/linux/arm/dl-procinfo.h (_dl_procinfo):
Likewise.
The Linux kernel suppresses some ICMP error messages by default for
UDP sockets. This commit enables full ICMP error reporting,
hopefully resulting in faster failover to working name servers.
This patch adds some defines relate to machine flag and section information,
which is used by elfutils elflint check. A C-SKY typo is also fixed with
this patch.
* elf/elf.h (EF_CSKY_ABIMASK, EF_CSKY_OTHER, EF_CSKY_PROCESSOR)
(EF_CSKY_ABIV1, EF_CSKY_ABIV2, SHT_CSKY_ATTRIBUTES): New defines.
Mark the lr register as undefined at the start of execution, so unwind
will stop at this frame. run-backtrace-*.sh from elfutils testsuite will
fail without this patch.
* sysdeps/csky/abiv2/start.S: Mark lr as undefined.
* sysdeps/unix/sysv/linux/csky/abiv2/clone.S: Likewise.
* sysdeps/unix/sysv/linux/csky/abiv2/setcontext.S: Likewise.
C-SKY GDB dose not use this file for ptrace and coredump. ptrace can use
pt_regs definition from linux kernel directly. The old definition only
got 34 regs instead of 38 regs from linux kernel, which will corrupted
the memory after ptrace PTRACE_GETREGSET call.
* sysdeps/unix/sysv/linux/csky/sys/procfs.h: Use linux definition
directly.
* sysdeps/unix/sysv/linux/csky/sys/user.h: Remove user_regs
definition.
C-SKY defines SIGCONTEXT as siginfo_t *_si, struct ucontext_t * for
__profil_counter. ucontext_t get an extra __mask field which is miss
match with the struct sigcontext from linux kernel. The time value
from gprof report will be always zero without this patch. This
patch also fix the registers sequence in register-dump.h.
* sysdeps/unix/sysv/linux/csky/register-dump.h: Adjust offset change.
* sysdeps/unix/sysv/linux/csky/sys/ucontext.h: Remove __mask field
in mcontext_t
Unicode 12.0.0 Support: Character encoding, character type info, and
transliteration tables are all updated to Unicode 12.0.0, using
the generator scripts contributed by Mike FABIAN (Red Hat).
Some info about the number of characters added or changed:
Total added characters in newly generated CHARMAP: 554
Total added characters in newly generated WIDTH: 106
alpha: Missing 8 characters of old ctype in new ctype
(These are combining marks, apparently they were removed from alpha
on purpose)
alpha: Added 295 characters in new ctype which were not in old ctype
combining: Missing 2 characters of old ctype in new ctype
(U+1CF2 VEDIC SIGN ARDHAVISARGA and U+1CF3 VEDIC SIGN ROTATED ARDHAVISARGA,
these are now "Alphabetic" in Unicode 12.0.0)
combining: Added 37 characters in new ctype which were not in old ctype
combining_level3: Missing 2 characters of old ctype in new ctype
(U+1CF2 VEDIC SIGN ARDHAVISARGA and U+1CF3 VEDIC SIGN ROTATED ARDHAVISARGA,
these are now "Alphabetic" in Unicode 12.0.0)
combining_level3: Added 26 characters in new ctype which were not in old ctype
graph: Added 554 characters in new ctype which were not in old ctype
lower: Added 6 characters in new ctype which were not in old ctype
print: Added 554 characters in new ctype which were not in old ctype
punct: Missing 29 characters of old ctype in new ctype
(These characters have all become "Alphabetic" in Unicode 12.0.0.
Therefore, they are not in "punct" anymore (see: is_punct() in unicode_utils.py))
punct: Added 296 characters in new ctype which were not in old ctype
tolower: Added 7 characters in new ctype which were not in old ctype
totitle: Added 7 characters in new ctype which were not in old ctype
toupper: Added 7 characters in new ctype which were not in old ctype
upper: Added 7 characters in new ctype which were not in old ctype
[BZ #24307]
* localedata/unicode-gen/Makefile (UNICODE_VERSION): Set to 12.0.0.
* localedata/unicode-gen/DerivedCoreProperties.txt: Update to Unicode 12.0.0.
* localedata/unicode-gen/EastAsianWidth.txt: Likewise.
* localedata/unicode-gen/PropList.txt: Likewise.
* localedata/unicode-gen/UnicodeData.txt: Likewise.
* localedata/unicode-gen/ctype_compatibility_test_cases.py: U+108D became
"Alphabetic" in Unicode 12.0.0. Adapt test case.
* localedata/charmaps/UTF-8: Regenerate.
* localedata/locales/i18n_ctype: Likewise.
* localedata/locales/tr_TR: Likewise.
* localedata/locales/translit_circle: Likewise.
* localedata/locales/translit_cjk_compat: Likewise.
* localedata/locales/translit_combining: Likewise.
* localedata/locales/translit_compat: Likewise.
* localedata/locales/translit_font: Likewise.
* localedata/locales/translit_fraction: Likewise.
This patch fixes further coding style issues where code should have
broken lines before operators in accordance with the GNU Coding
Standards but instead was breaking lines after them.
Tested for x86_64, and with build-many-glibcs.py.
* stdio-common/vfscanf-internal.c (ARG): Break lines before rather
than after operators.
* sysdeps/mach/hurd/setitimer.c (timer_thread): Likewise.
(setitimer_locked): Likewise.
* sysdeps/mach/hurd/sigaction.c (__sigaction): Likewise.
* sysdeps/mach/hurd/sigaltstack.c (__sigaltstack): Likewise.
* sysdeps/mach/pagecopy.h (PAGE_COPY_FWD): Likewise.
* sysdeps/mach/thread_state.h (machine_get_basic_state): Likewise.
* sysdeps/powerpc/powerpc64/tst-ucontext-ppc64-vscr.c
(PPC_CPU_SUPPORTED): Likewise.
* sysdeps/unix/sysv/linux/alpha/a.out.h (N_TXTOFF): Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/overflow.h
(stat_overflow): Likewise.
(statfs_overflow): Likewise.
* sysdeps/unix/sysv/linux/tst-personality.c (do_test): Likewise.
* sysdeps/unix/sysv/linux/tst-ttyname.c (eq_ttyname): Likewise.
(eq_ttyname_r): Likewise.
(run_chroot_tests): Likewise.
The check for "/finclude/" fails with the actual location of
Fortran headers because they are now stored in the "finclude"
subdirectory of the top-level include directory, so a relative path
does not contain a slash '/' before the "finclude" string.
This patch assumes realtime clock support for nptl and thus removes
all the associated code.
For __pthread_mutex_timedlock the fallback usage for the case where
lll_futex_timed_wait_bitset it not set define is also removed. The
generic lowlevellock-futex.h always define it, so for NPTL code the
check always yield true.
Checked on x86_64-linux-gnu and i686-linux-gnu.
* nptl/nptl-init.c (__have_futex_clock_realtime,
__have_futex_clock_realtime): Remove definition.
(__pthread_initialize_minimal_internal): Remove FUTEX_CLOCK_REALTIME
check test for !__ASSUME_FUTEX_CLOCK_REALTIME.
* nptl/pthread_mutex_timedlock.c (__pthread_mutex_timedlock): Assume
__ASSUME_FUTEX_CLOCK_REALTIME support.
* sysdeps/unix/sysv/linux/i386/lowlevellock.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/lowlevellock.S: Likewise.
* sysdeps/unix/sysv/linux/kernel-features.h
(__ASSUME_FUTEX_CLOCK_REALTIME): Remove.
* sysdeps/nptl/lowlevellock-futex.h (lll_futex_timed_wait_bitset):
Adjust comment.
Since the commit
commit 81a1443941
Author: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Date: Tue Feb 5 17:35:12 2019 -0200
wcsmbs: optimize wcscat
powerpc64 and powerpc64le builds fail when configured with
--disable-multi-arch and --with-cpu=power6 (or newer), due to an
undefined reference to __GI___wcscpy. This patch fixes this on
sysdeps/powerpc/powerpc64/power6/wcscpy.c, which is only used when
multi-arch is disabled.
This patch does nothing for the failures on 32-bits powerpc builds,
because the file is under the powerpc64 subdirectory, however, powerpc
builds were already failing with --disable-multi-arch, with multiple
error messages, even before the aforementioned commit.
Tested for powerpc, powerpc64, and powerpc64le with multi-arch enabled
(all pass) and disabled (powerpc still fails as explained above).
Set the default function alignment to 16 bytes in order to
get rid of some unwanted performance effects.
Please see also GCC commit "S/390: Set default function
alignment to 16." (Subversion revision 262817)
ChangeLog:
* sysdeps/s390/s390-64/sysdep.h(ENTRY): Use alignment of 16byte.
* sysdeps/s390/s390-32/sysdep.h: Likewise.
The offset in era-string format for Taisho gan-nen (1912) is currently
defined as 2, but it should be 1. So fix it. "Gan-nen" means the 1st
(origin) year, Taisho started on July 30, 1912.
Reported-by: Morimitsu, Junji <junji.morimitsu@hpe.com>
Reviewed-by: Rafal Luzynski <digitalfreak@lingonborough.com>
ChangeLog:
[BZ #24162]
* localedata/locales/ja_JP (LC_TIME): Change the offset for Taisho
gan-nen from 2 to 1. Problem reported by Morimitsu, Junji.
This patch adds test cases for the compatibility versions of the
functions: err, errx, verr, verrx, warn, warnx, vwarn, vwarnx (from
err.h), error, and error_at_line (from error.h), when long double has
the same format as double (-mlong-double-64).
Tested for powerpc, powerpc64 and powerpc64le.
On platforms where long double may have the same format as double
(-mlong-double-64), error and error_at_line do not take that into
account and might produce wrong output if a long double conversion is
requested by the format string ('%Lf'). This patch adds compatibility
functions for this situation and redirects calls via header magic.
Tested for powerpc, powerpc64 and powerpc64le.
When support for long double format with 128-bits (-mlong-double-128)
was added for platforms where long double had the same format as double,
such as powerpc, compatibility versions for the functions listed in the
commit title were missed. Since the older format of long double can
still be used (with -mlong-double-64), using these functions with a
format string that requests the printing of long double variables will
produce wrong outputs.
This patch adds the missing compatibility functions and header magic to
redirect calls to them when -mlong-double-64 is in use.
Tested for powerpc, powerpc64 and powerpc64le.
The test case tst-ldbl-argp checks that the conversion specifier '%Lf'
correctly prints long double values with the default long double format
for a platform. This patch reuses the test case for long double with
the same format as double (-mlong-double-64).
Tested for powerpc, powerpc64 and powerpc64le.
The functions argp_error and argp_failure are missing support for
printing long double values when long double has the same format as
double. This patch adds the new functions __nldbl_argp_error and
__nldbl_argp_failure, as well as header magic to redirect calls to them
when -mlong-double-64 is in use.
Tested for powerpc, powerpc64 and powerpc64le.
It is possible that the link editor injects an allocated ABI tag note
before the artificial, allocated large note in the test. Note parsing
in open_verify stops when the first ABI tag note is encountered, so if
the ABI tag note comes first, the problematic code is not actually
exercised.
Also tweak the artificial note so that it is a syntactically valid
4-byte aligned note, in case the link editor tries to parse notes and
process them.
Improves the testing part of commit 0065aaaaae.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The recent commit 81a1443941
has introduced __wcscpy, __GI___wcscpy and the weak alias wcscpy.
This patch also introduces those symbols if glibc is build
with CFLAGS="-march=z13" where the ifunc is omitted.
ChangeLog:
* sysdeps/s390/wcscpy-vx.S: Add strong aliases to
__wcscpy, __GI___wcscpy and weak alias to wcscpy.
This patch fixes more places where a space should have been present
before '(' in accordance with the GNU Coding Standards (as with the
previous patch, mainly for calls to sizeof).
Tested with build-many-glibcs.py.
* sysdeps/powerpc/powerpc32/dl-machine.c
(__elf_machine_fixup_plt): Use space before '('.
(__process_machine_rela): Likewise.
* sysdeps/powerpc/powerpc32/register-dump.h (register_dump):
Likewise.
* sysdeps/powerpc/powerpc64/le/fpu/sfp-machine.h (TI_BITS):
Likewise.
* sysdeps/powerpc/powerpc64/register-dump.h (register_dump):
Likewise.
* sysdeps/powerpc/test-arith.c (union_t): Likewise.
(pattern): Likewise.
(delta): Likewise.
(check_result): Likewise.
(check_excepts): Likewise.
(check_op): Likewise.
(fail_xr): Likewise.
* sysdeps/unix/alpha/sysdep.h (syscall_promote): Likewise.
* sysdeps/unix/sysv/linux/alpha/a.out.h (AOUTHSZ): Likewise.
(SCNHSZ): Likewise.
* sysdeps/unix/sysv/linux/hppa/makecontext.c (FRAME_SIZE_BYTES):
Likewise.
(ARGS): Likewise.
(__makecontext): Likewise.
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h (ucontext_t):
Likewise.
The existing tests all use global symbols (but with different
visibility). Local symbols could be treated differently by the
compiler and linker (as was the case on POWER ELFv2, causing
bug 23937), and we did not have test coverage for this.
Tested on x86-64 and POWER ELFv2 little-endian, with and without
--disable-multi-arch. On POWER, the test cases elf/ifuncmain9,
elf/ifuncmain9pic, elf/ifuncmain9pie reproduce bug 23937 with older
binutils.
We should run IFUNC tests with --disable-multi-arch if the toolchain
supports IFUNCs. For correctness, --disable-multi-arch must not
remove IFUNC support from the loader.
Tested on x86-64, x32 and i686 with and without --disable-multi-arch.
* configure.ac (have-ifunc): New LIBC_CONFIG_VAR.
* configure: Regenerated.
* elf/Makefile: Run IFUNC tests if binutils supports IFUNC.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
This patch fixes -Wempty-body warnings in Hurd-specific code that show
up building glibc with -Wextra.
Note: there also such warnings on many platforms arising from the
default definition of HP_TIMING_NOW in sysdeps/generic/hp-timing.h,
but no change there is proposed in this patch because of other changes
under discussion in that area that would result in a nonempty
definition.
Tested with build-many-glibcs.py.
* hurd/hurdinit.c (_hurd_init): Use braces around empty body of an
if statement.
This patch rewrites wcsnlen using wmemchr. The generic wmemchr
already uses the strategy (loop unrolling and tail handling) and
by using it it allows architectures that have optimized wmemchr
(s390 and x86_64) to optimize wcsnlen as well.
Checked on x86_64-linux-gnu.
* wcsmbs/wcsnlen.c (__wcsnlen): Rewrite using wmemchr.
This patch rewrites wcsncpy using wcsnlen, wmemset, and wmemcpy. This is
similar to the optimization done on strncpy by f6482cf29d and 6423d4754c.
Checked on x86_64-linux-gnu.
* wcsmbs/wcsncpy.c (__wcsncpy): Rewrite using wcsnlen, wmemset, and
wmemcpy.
This patch rewrites wcsncat using wcslen, wcsnlen, and wmemcpy. This is
similar to the optimization done on strncat by 3eb38795db and e80514b5a8.
Checked on x86_64-linux-gnu.
* wcsmbs/wcsncat.c (wcsncat): Rewrite using wcslen, wcsnlen, and
wmemcpy.
This patch rewrites wcscpy using wcslen and wmemcpy. This is similar
to the optimization done on strcpy by b863d2bc4d.
Checked on x86_64-linux-gnu.
* wcsmbs/wcscpy.c (__wcpcpy): Rewrite using wcslen and wmemcpy.
This patch rewrites wcscat using wcslen and wcscpy. This is similar to
the optimization done on strcat by 6e46de42fe.
The strcpy changes are mainly to add the internal alias to avoid PLT
calls.
Checked on x86_64-linux-gnu and a build against the affected
architectures.
* include/wchar.h (__wcscpy): New prototype.
* sysdeps/powerpc/powerpc32/power4/multiarch/wcscpy-ppc32.c
(__wcscpy): Route internal symbol to generic implementation.
* sysdeps/powerpc/powerpc32/power4/multiarch/wcscpy.c (wcscpy):
Add internal __wcscpy alias.
* sysdeps/powerpc/powerpc64/multiarch/wcscpy.c (wcscpy): Likewise.
* sysdeps/s390/wcscpy.c (wcscpy): Likewise.
* sysdeps/x86_64/multiarch/wcscpy.c (wcscpy): Likewise.
* wcsmbs/wcscpy.c (wcscpy): Add
* sysdeps/x86_64/multiarch/wcscpy-c.c (WCSCPY): Adjust macro to
use generic implementation.
* wcsmbs/wcscat.c (wcscat): Rewrite using wcslen and wcscpy.
This patch rewrites wcpncpy using wcslen, wmemcpy, and wmemset. This is
similar to the optimization done on stpncpy by 48497aba8e.
Checked on x86_64-linux-gnu.
* wcsmbs/wcpncpy.c (__wcpcpy): Rewrite using wcslen, wmemcpy, and
wmemset.
This patch rewrites wcpcpy using wcslen and wmemcpy. This is
similar to the optimizatio done on stpcpy by f559d8cf29.
Checked on x86_64-linux-gnu and string tests on a simulated
m68k-linux-gnu.
* sysdeps/m68k/wcpcpy.c: Remove file.
* wcsmbs/wcpcpy.c (__wcpcpy): Rewrite using wcslen and wmemcpy.
This patch fixes -Wimplicit-fallthrough warnings in system-specific
code that show up building glibc with -Wextra, by adding fall-through
comments, or moving existing such comments to the place required for
them to work (immediately before the case label being fallen through).
Tested with build-many-glibcs.py.
* sysdeps/i386/dl-machine.h (elf_machine_rela): Add fall-through
comments.
* sysdeps/m68k/m680x0/fpu/s_cexp_template.c (s(__cexp)): Likewise.
* sysdeps/m68k/memcopy.h (WORD_COPY_FWD): Likewise.
(WORD_COPY_BWD): Likewise.
* sysdeps/mach/hurd/ioctl.c (__ioctl): Likewise.
* sysdeps/powerpc/powerpc64/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/s390/iso-8859-1_cp037_z900.c (TR_LOOP): Likewise.
* sysdeps/mips/dl-machine.h (elf_machine_reloc): Move fall-through
comment.
* sysdeps/mips/dl-trampoline.c (__dl_runtime_resolve): Likewise.
Add /etc/host.conf file with 'multi on' to tst-nss-files-hosts-long.root.
Ensures the entire file, and all long lines, need to be parsed for the
test.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since the introduction of explicit flags in the internal implementation
of the printf family of functions, the 'mode' parameter can be used to
select which format long double parameters have (with the mode flag:
PRINTF_LDBL_IS_DBL). This patch uses this feature in the implementation
of some functions in argp.h, err.h, and error.h (only those that take a
format string and positional parameters). Future patches will add
support for 'nldbl' and 'ieee128' versions of these functions.
Tested for powerpc64le and x86_64.
The configure fragment for powerpc64le contains a test for the presence
of several compiler builtins and of the __float128 type, which are
provided by GCC 6.2 for powerpc64le. Since this configure test was
added, the compiler version required to build glibc for powerpc64le was
different than that required for the other architectures.
Now that glibc requires GCC 6.2 globally (since commit ID 4dcbbc3b28),
this patch removes the powerpc64le-specific test.
Even tough the configure test checks for compiler features rather than
compiler version, the intent of the test was to stop build attempts at
early stages, if they had been configured with a too old compiler. It
was not the intention of the test to detect compiler breakage (such as
the removal of the required compiler features in future GCC versions),
and glibc is not the place to test for compiler regressions, anyway.
Tested for powerpc64le with GCC 6.2 (built with build-many-glibcs.py).
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
In pthread_tryjoin if pd->tid == 0 then we will not block on a
futex operation because we will immediately see the join is already
complete and return. The comment is fixed to reflect that.
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
Building glibc with -Wextra shows a -Wimplicit-fallthrough warning for
SPARC64 that appears to be a real bug in glibc. The dynamic linker
handling of R_SPARC_H34 falls through to that of R_SPARC_H44, which in
the case of this code is nonsensical (it means the value computed for
R_SPARC_H34 gets overwritten by one computed with the different logic
for R_SPARC_H44). Thus, this patch adds the missing break there.
Note: I do not have a testcase to demonstrate this bug.
Tested with build-many-glibcs.py.
[BZ #24231]
* sysdeps/sparc/sparc64/dl-machine.h (elf_machine_rela): Add break
after R_SPARC_H34 case.
These variables are only used to determine if a stdio stream is
a pre-allocated stream, but it is possible to do so by comparing
a FILE * to all pre-allocated stream objects. As a result, it is
not necessary to keep those pointers in separate variables.
Behavior with symbol interposition is unchanged because _IO_stdin_,
_IO_stdout_, _IO_stderr_ are exported, and refer to objects outside of
libc if symbol interposition or copy relocations are involved. (The
removed variables _IO_stdin, _IO_stdout, _IO_stderr were not exported,
of course.)
From time to time the test misc/tst-clone3 fails with a timeout.
Then futex_wait is blocking. Usually ctid should be set to zero
due to CLONE_CHILD_CLEARTID and the futex should be waken up.
But the fail occures if the thread has already exited before
ctid is set to the return value of clone(). Then futex_wait() will
block as there will be nobody who wakes the futex up again.
This patch initializes ctid to a known value before calling clone
and the kernel is the only one who updates the value to zero after clone.
If futex_wait is called then it is either waked up due to the exited thread
or the futex syscall fails as *ctid_ptr is already zero instead of the
specified value 1.
ChangeLog:
* sysdeps/unix/sysv/linux/tst-clone3.c (do_test):
Initialize ctid with a known value and remove update of ctid
after clone.
(wait_tid): Adjust arguments and call futex_wait with ctid_val
as assumed current value of ctid_ptr.
If building on a subset of architectures only, it is easy to miss
wrapper headers which are required by other architectures because
they lack the corresponding sysdeps header. The check ensures
that every installed header which is not itself a sysdeps header
has a header under include/ (that presumably wraps the header,
and perhaps also adding declarations and definitions for !_ISOMAC).
Also check for the absence of the sysdeps/generic/bits directory
removed in commit c72565e5f1, to make
accidental re-introduction more difficult.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
With a complete set of wrapper headers, it will be possible to check
for automatically for new installed headers which lack such wrappers.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
sys/procfs.h was already using this sysdeps directory.
This avoids the need for nptl-specific wrapper headers under
include/, a generic location in the source tree.
With internal fcntl64 internal (commit 06ab719d), it is possible to
consolidate lockf implementation by using the LFS fcntl interface
instead of using arch and system-specific implementations.
For Linux, the i386 implementation is used as generic implementation
by replacing the direct syscall with fcntl64 call. The LFS symbol
alias for default LFS ABI (__OFF_T_MATCHES_OFF64_T) is used to avoid
the duplicate symbol (instead of overriding the implementation with an
empty file).
For Hurd lockf64 semantic is changed: previous generic lockf64
implementation returned EOVERFLOW if LEN input is larger than 32-bit
off_t. However, Hurd fcntl64 implementation for F_GETLK64, F_SETLK64,
and F_SETLKW64 do accept off64_t inputs (__f_setlk accepts only off64_t
inputs).
Checked on i686-linux-gnu and x86_64-linux-gnu along with a i686-gnu
build.
* io/Makefile (tests): Add tst-lockf.
* io/lockf.c (lockf): Use __fcntl and only define for
!__OFF_T_MATCHES_OFF64_T.
* io/lockf64.c (__lockf64): Call __fcntl64 and alias to lockf for
__OFF_T_MATCHES_OFF64_T case.
* io/tst-lockf.c: New file.
* sysdeps/unix/sysv/linux/i386/lockf64.c: Remove file.
* sysdeps/unix/sysv/linux/arm/lockf64.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/lockf64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/lockf64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/lockf64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/lockf64.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/lockf64.c: Likewise.
* sysdeps/unix/sysv/linux/sh/lockf64.c: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/lockf64.c: Likewise.
After commit f1ac745583 ("arm: Use "nr"
constraint for Systemtap probes [BZ #24164]"), we load pd->result into
a register in the probe below:
/* Free the TCB. */
__free_tcb (pd);
}
else
pd->joinid = NULL;
LIBC_PROBE (pthread_join_ret, 3, threadid, result, pd->result);
However, at this point, the thread descriptor has been freed. If the
thread stack does not fit into the thread stack cache, the memory will
have been unmapped, and the program will crash in the probe.
Building the testsuite with -Wextra produces a warning in
sunrpc/tst-svc_register.c for a useless qualifier on a function return
type. This patch removes that qualifier.
Tested for x86_64.
* sunrpc/tst-svc_register.c (rpcbind_address): Remove qualifier
from function return type.
Building the testsuite with -Wextra (together with
-Wno-cast-function-type -Wno-clobbered -Wno-expansion-to-defined
-Wno-missing-field-initializers -Wno-old-style-declaration
-Wno-shift-negative-value -Wno-sign-compare -Wno-type-limits
-Wno-unused-parameter, which reflect the set of -Wextra warnings for
which glibc itself is not currently clean on x86_64) showed up
implicit-fallthrough warnings in tst-setjmp.c. Those warnings appear
to be false positives, arising from a function "jump" that calls
longjmp not itself being marked as noreturn; thus, this patch adds the
noreturn marking to that function to fix the warnings.
Tested for x86_64.
* setjmp/tst-setjmp.c (jump): Use __attribute__ ((__noreturn__)).
In some cases, sensitive to readline version and the user's
environment, gdb might emit escape codes while run under python's
pexpect (i.e. testing pretty printers). This patch, suggested
by Jan, helps isolate the test from the user's environment.
Tested on RHEL 7 x86_64 with DTS 7 and EPEL, which is one
magic combination of components that triggers this bug.
This patch fixes implicit-fallthrough warnings in sunrpc/xdr.c when
building with -Wextra. A fall-through comment is added in three
places; in two other places, an existing comment is reworded so it
matches the default patterns used by -Wimplicit-fallthrough.
Tested for x86_64.
* sunrpc/xdr.c (xdr_int): Add fall-through comment.
(xdr_u_int): Likewise.
(xdr_enum): Likewise.
(xdr_bytes): Reword fall-through comment.
(xdr_string): Likewise.
Patch ce7eb0e903 ("nptl: Cleanup cancellation macros") changed the
join sequence for internal common __pthread_timedjoin_ex to use the
new macro lll_wait_tid. The idea was this macro would issue the
cancellable futex operation depending whether the timeout is used or
not. However if a timeout is used, __lll_timedwait_tid is called and
it is not a cancellable entrypoint.
This patch fixes it by simplifying the code in various ways:
- Instead of adding the cancellation handling on __lll_timedwait_tid,
it moves the generic implementation to pthread_join_common.c (called
now timedwait_tid with some fixes to use the correct type for pid).
- The llvm_wait_tid macro is removed, along with its replication on
x86_64, i686, and sparc arch-specific lowlevellock.h.
- sparc32 __lll_timedwait_tid is also removed, since the code is similar
to generic one.
- x86_64 and i386 provides arch-specific __lll_timedwait_tid which is
also removed since they are similar in functionality to generic C code
and there is no indication it is better than compiler generated code.
New tests, tst-join8 and tst-join9, are provided to check if
pthread_timedjoin_np acts as a cancellation point.
Checked on x86_64-linux-gnu, i686-linux-gnu, sparcv9-linux-gnu, and
aarch64-linux-gnu.
[BZ #24215]
* nptl/Makefile (lpthread-routines): Remove lll_timedwait_tid.
(tests): Add tst-join8 tst-join9.
* nptl/lll_timedwait_tid.c: Remove file.
* sysdeps/sparc/sparc32/lll_timedwait_tid.c: Likewise.
* sysdeps/unix/sysv/linux/i386/lll_timedwait_tid.c: Likewise.
* sysdeps/sysv/linux/x86_64/lll_timedwait_tid.c: Likewise.
* nptl/pthread_join_common.c (timedwait_tid): New function.
(__pthread_timedjoin_ex): Act as cancellation entrypoint is block
is set.
* nptl/tst-join5.c (thread_join): New function.
(tf1, tf2, do_test): Use libsupport and add pthread_timedjoin_np
check.
* nptl/tst-join8.c: New file.
* nptl/tst-join9.c: Likewise.
* sysdeps/nptl/lowlevellock-futex.h (lll_futex_wait_cancel,
lll_futex_timed_wait_cancel): Add generic macros.
* sysdeps/nptl/lowlevellock.h (__lll_timedwait_tid, lll_wait_tid):
Remove definitions.
* sysdeps/unix/sysv/linux/i386/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/lowlevellock.h: Likewise.
* sysdeps/sparc/sparc32/lowlevellock.c (__lll_timedwait_tid):
Remove function.
* sysdeps/unix/sysv/linux/i386/lowlevellock.S (__lll_timedwait_tid):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/lowlevellock.S: Likewise.
* sysdeps/unix/sysv/linux/lowlevellock-futex.h
(lll_futex_timed_wait_cancel): New macro.
Add a malloc micro benchmark to enable accurate testing of the
various paths in malloc and free. The benchmark does a varying
number of allocations of a given block size, then frees them again.
It tests 3 different scenarios: single-threaded using main arena,
multi-threaded using thread-arena, main arena with SINGLE_THREAD_P
false.
* benchtests/Makefile: Add malloc-simple benchmark.
* benchtests/bench-malloc-simple.c: New benchmark.
