The existing implementations of lgamma functions (except for the ia64
versions) use the reflection formula for negative arguments. This
suffers large inaccuracy from cancellation near zeros of lgamma (near
where the gamma function is +/- 1).
This patch fixes this inaccuracy. For arguments above -2, there are
no zeros and no large cancellation, while for sufficiently large
negative arguments the zeros are so close to integers that even for
integers +/- 1ulp the log(gamma(1-x)) term dominates and cancellation
is not significant. Thus, it is only necessary to take special care
about cancellation for arguments around a limited number of zeros.
Accordingly, this patch uses precomputed tables of relevant zeros,
expressed as the sum of two floating-point values. The log of the
ratio of two sines can be computed accurately using log1p in cases
where log would lose accuracy. The log of the ratio of two gamma(1-x)
values can be computed using Stirling's approximation (the difference
between two values of that approximation to lgamma being computable
without computing the two values and then subtracting), with
appropriate adjustments (which don't reduce accuracy too much) in
cases where 1-x is too small to use Stirling's approximation directly.
In the interval from -3 to -2, using the ratios of sines and of
gamma(1-x) can still produce too much cancellation between those two
parts of the computation (and that interval is also the worst interval
for computing the ratio between gamma(1-x) values, which computation
becomes more accurate, while being less critical for the final result,
for larger 1-x). Because this can result in errors slightly above
those accepted in glibc, this interval is instead dealt with by
polynomial approximations. Separate polynomial approximations to
(|gamma(x)|-1)(x-n)/(x-x0) are used for each interval of length 1/8
from -3 to -2, where n (-3 or -2) is the nearest integer to the
1/8-interval and x0 is the zero of lgamma in the relevant half-integer
interval (-3 to -2.5 or -2.5 to -2).
Together, the two approaches are intended to give sufficient accuracy
for all negative arguments in the problem range. Outside that range,
the previous implementation continues to be used.
Tested for x86_64, x86, mips64 and powerpc. The mips64 and powerpc
testing shows up pre-existing problems for ldbl-128 and ldbl-128ibm
with large negative arguments giving spurious "invalid" exceptions
(exposed by newly added tests for cases this patch doesn't affect the
logic for); I'll address those problems separately.
[BZ #2542]
[BZ #2543]
[BZ #2558]
* sysdeps/ieee754/dbl-64/e_lgamma_r.c (__ieee754_lgamma_r): Call
__lgamma_neg for arguments from -28.0 to -2.0.
* sysdeps/ieee754/flt-32/e_lgammaf_r.c (__ieee754_lgammaf_r): Call
__lgamma_negf for arguments from -15.0 to -2.0.
* sysdeps/ieee754/ldbl-128/e_lgammal_r.c (__ieee754_lgammal_r):
Call __lgamma_negl for arguments from -48.0 or -50.0 to -2.0.
* sysdeps/ieee754/ldbl-96/e_lgammal_r.c (__ieee754_lgammal_r):
Call __lgamma_negl for arguments from -33.0 to -2.0.
* sysdeps/ieee754/dbl-64/lgamma_neg.c: New file.
* sysdeps/ieee754/dbl-64/lgamma_product.c: Likewise.
* sysdeps/ieee754/flt-32/lgamma_negf.c: Likewise.
* sysdeps/ieee754/flt-32/lgamma_productf.c: Likewise.
* sysdeps/ieee754/ldbl-128/lgamma_negl.c: Likewise.
* sysdeps/ieee754/ldbl-128/lgamma_productl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/lgamma_negl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/lgamma_productl.c: Likewise.
* sysdeps/ieee754/ldbl-96/lgamma_negl.c: Likewise.
* sysdeps/ieee754/ldbl-96/lgamma_product.c: Likewise.
* sysdeps/ieee754/ldbl-96/lgamma_productl.c: Likewise.
* sysdeps/generic/math_private.h (__lgamma_negf): New prototype.
(__lgamma_neg): Likewise.
(__lgamma_negl): Likewise.
(__lgamma_product): Likewise.
(__lgamma_productl): Likewise.
* math/Makefile (libm-calls): Add lgamma_neg and lgamma_product.
* math/auto-libm-test-in: Add more tests of lgamma.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
Topic: strptime supports a %z input field descriptor, which parses a
time zone offset from UTC time into the broken-out time field tm_gmtoff.
Problems:
1) In the current implementation, the minutes portion calculation is
correct only for minutes evenly divisible by 3. This is because the
minutes value is converted to decimal time, but inadequate precision
leads to rounding which calculates results that are too low for
some values.
For example, due to rounding, a +1159 offset string results in an
incorrect tm_gmtoff of 43128 (== 11 * 3600 + 58.8 * 60) seconds,
instead of 43140 (== 11 * 3600 + 59 * 60) seconds. In contrast,
a +1157 offset (minutes divisible by 3) does not cause the bug,
and results in a correct tm_gmtoff of 43020.
2) strptime's %z specifier will not parse time offsets less than
-1200 or greater than +1200, or if only hour digits are present, less
than -12 or greater than +12. It will return NULL for offsets outside
that range. These limits do not meet historical and modern use cases:
* Present day exceeds the +1200 limit:
- Pacific/Auckland (New Zealand) summer time is +1300.
- Pacific/Kiritimati (Christmas Island) is +1400.
- Pacific/Apia (Samoa) summer time is +1400.
* Historical offsets exceeded +1500/-1500.
* POSIX supports -2459 to +2559.
* Offsets up to +/-9959 may occasionally be useful.
* Paul Eggert's notes provide additional detail:
- https://sourceware.org/ml/libc-alpha/2014-12/msg00068.html
- https://sourceware.org/ml/libc-alpha/2014-12/msg00072.html
3) tst-strptime2, part of the 'make check' test suite, does not test
for the above problems.
Corrective actions:
1) In time/strptime_l.c, calculate the offset from the hour and
minute portions directly, without the rounding errors introduced by
decimal time.
2) Remove the +/-1200 range limit, permitting strptime to parse offsets
from -9959 through +9959.
3) Add zone offset values to time/tst-strptime2.c.
* Test minutes evenly divisible by three (+1157) and not evenly
divisible by three (+1158 and +1159).
* Test offsets near the old and new range limits (-1201, -1330, -2459,
-2500, -99, -9959, +1201, +1330, +1400, +1401, +2559, +2600, +99,
and +9959)
The revised strptime passes all old and new tst-strptime2 tests.
This patch fixes the default wordsize-32 mmap implementation offset
calculation for negative values. Current code uses signed shift
operation to calculate the multiple size to use with syscall and
it is implementation defined. Change it to use a division base
on mmap page size (default being as before, 4096).
Tested on armv7hf.
[BZ #18877]
* posix/Makefile (tests): Add tst-mmap-offset.
* posix/tst-mmap.c: New file.
* sysdeps/unix/sysv/linux/generic/wordsize-32/mmap.c (__mmap): Fix
offset calculation for negative values.
This patch set introduces optimized string, wcsmbs and memory functions for
S390/S390x. The functions are accelerated by the usage of the new z13 vector
instructions.
The Principles of Operations manual for IBM z13 is publically available:
http://publibfi.boulder.ibm.com/epubs/pdf/dz9zr010.pdf
The support for these instructions in assembler was introduced by commits:
-"[Committed] S/390: Add support for IBM z13."
(https://sourceware.org/ml/binutils/2015-01/msg00197.html)
-"[Committed] S/390: Add more IBM z13 instructions"
(https://sourceware.org/ml/binutils/2015-03/msg00088.html)
The first patches do preparation for the latter optimization patches.
The floating point exception handling - fetestexcept(), ... - is fixed and
the platform and hwcap strings are extended.
The current ifunc routines memset, memcpy and memcmp are refactored and the
ifunc test-framework is now enabled.
A S390 specific configure-check tests if the used binutils supports the new
vector instructions. The optimized functions are provided via ifunc if the
binutils supports the vector instructions. Otherwise a message is dumped to
configure output and only the currently used common code functions are
available.
The optimized functions are implemented in common for s390-32 and s390-64
and the few differences are handled via #ifdef.
The ifunc-resolvers are defined in files sysdeps/s390/multiarch/<func>.c,
which choose either the current implementation __<func>_c() or the vector
implementation __<func>_vx() depending on the HWCAP_S390_VX flag bit in
AT_HWCAP field. If the bit is set, the hardware and the kernel are supporting
vector registers and instructions. If the used binutils lacks vector-support,
then the default implementation in string or wcsmbs directory is included
here instead.
The file sysdeps/s390/multiarch/<func>-c.c includes the current implementation
and defines the function name __<func>_c.
The assembler files sysdeps/s390/multiarch/<func>-vx.S with the vector
instructions are using the directive '.machine "z13"' to allow building glibc
without option '-march=z13'. Additionally the directive '.machinemode
"zarch_nohighgprs"' is needed for the 31bit glibc. This mode does not set the
highgprs flag in ELF header, which would lead to an unloadable libc on a 31bit
kernel.
The most optimized string functions are structured in the same way:
The first 16 bytes of the string is loaded unaligned via vlbb - vector load
to block boundary (e.g. 4k). This instruction loads 16 bytes if possible.
In case of a page cross, it only loads the last bytes of the current page
without a segmentation fault.
Afterwards these first part of string is processed. If e.g. for strlen the end
of string is reached within this first part, the function returns. Otherwise
the pointer is aligned to 16 byte, so i can load a full vector register with vl
without checking for a page cross. Afterwards the first part of string is
processed. If e.g. for strlen the end of string is reached within this first
part, the function returns. Otherwise the pointer is aligned to 16 byte, so
a full vector register can be loaded with vl - vector load - without checking
for a page cross. The remaining string is processed in a four times unrolled
loop, because benchmark results measured improvements compared to a non
unrolled loop.
The optimized wide string functions can only handle 4byte aligned string
pointers. Although a wchar_t pointer should always be 4byte aligned, the most
current common code wide string functions can handle non aligned strings.
Thus the optimized functions will fall back to the common code functions in
case of a non aligned wide string to behave the same as before this patch.
Some string tests can test the string and the wide string version of a function.
The remaining ones are extended and new wide string tests are added.
This is the same in case of the benchtests.
ChangeLog:
* NEWS: New item for IBM z13 string optimizations.
The csqrt implementations in glibc can miss underflow exceptions when
the real or imaginary part of the result becomes tiny in the course of
scaling down (in particular, multiplication by 0.5) and that scaling
is exact although the relevant part of the mathematical result isn't.
This patch forces the exception in a similar way to previous fixes.
Tested for x86_64 and x86.
[BZ #18370]
* math/s_csqrt.c (__csqrt): Force underflow exception for results
whose real or imaginary part has small absolute value.
* math/s_csqrtf.c (__csqrtf): Likewise.
* math/s_csqrtl.c (__csqrtl): Likewise.
* math/auto-libm-test-in: Add more tests of csqrt.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
lang_lib (which reflects ISO 639-2/B (bibliographic) codes) and
lang_term (which reflects ISO 639-2/T (terminology) codes) should be
identical except for those languages for which ISO 639-2 specifies
separate bibliographic/terminology values.
I used this Library of Congress page as the source:
http://www.loc.gov/standards/iso639-2/php/code_list.php
The csqrt functions scale up small arguments to avoid underflows when
calling hypot functions. However, even when hypot does not underflow,
a subsequent calculation of 0.5 * hypot can underflow. This patch
duly increases the threshold and scale factor to avoid such underflows
as well.
Tested for x86_64, x86 and mips64.
[BZ #18823]
* math/s_csqrt.c (__csqrt): Increase threshold and scale factor
for scaling up small arguments.
* math/s_csqrtf.c (__csqrtf): Likewise.
* math/s_csqrtl.c (__csqrtl): Likewise.
* math/auto-libm-test-in: Add more tests of csqrt.
* math/auto-libm-test-out: Regenerated.
I think the last clause of the conditional,
|| __n <= __bos (__dest)
may be backward. The code should call the runtime-checking function
if __n is not constant, or if __n is known to be LARGER than the size
of the destination.
Various fma implementations have logic that, when computing fma (x, y,
z) where z is large (so care needs taking to avoid internal overflow)
but x * y is small, scale x * y up instead of down to avoid internal
underflows resulting from scaling down. (In these cases, x * y is
small enough that only its sign actually matters rather than the exact
value.)
The threshold for scaling up instead of down was correct for "if the
unscaled values were multiplied, the low part of the multiplication
could underflow", and the scaling was sufficient to ensure that the
low part of the multiplication did not underflow (given that cases of
very small x * y - less than half the least subnormal - were
previously dealt with). However, the choice in the functions wasn't
between scaling up or no scaling, but between scaling up and scaling
down (scaling down actually being needed when x * y isn't so small
compared to z and so the exact value does matter). Thus a larger
threshold is needed to ensure that scaling down doesn't produce values
the multiplication of whose low parts underflows. This patch
increases the thresholds accordingly.
Tested for x86_64, x86 and mips64 (with the MIPS version of s_fmal.c
removed so that the ldbl-128 version gets tested instead of the
soft-fp one).
[BZ #18824]
* sysdeps/ieee754/dbl-64/s_fma.c (__fma): Increase threshold for
scaling x * y up instead of down.
* sysdeps/ieee754/ldbl-128/s_fmal.c (__fmal): Likewise.
* sysdeps/ieee754/ldbl-96/s_fmal.c (__fmal): Likewise.
* math/auto-libm-test-in: Add more tests of fma.
* math/auto-libm-test-out: Regenerated.
Similar to various other bugs in this area, some tanh implementations
do not raise the underflow exception for subnormal arguments, when the
result is tiny and inexact. This patch forces the exception in a
similar way to previous fixes.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #16520]
* sysdeps/ieee754/dbl-64/s_tanh.c: Include <float.h>.
(__tanh): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/flt-32/s_tanhf.c: Include <float.h>.
(__tanhf): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/ldbl-128/s_tanhl.c: Include <float.h>.
(__tanhl): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/ldbl-128ibm/s_tanhl.c: Include <float.h>.
(__tanhl): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/ldbl-96/s_tanhl.c: Include <float.h>.
(__tanhl): Force underflow exception for arguments with small
absolute value.
* math/auto-libm-test-in: Add more tests of tanh.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
https://sourceware.org/bugzilla/show_bug.cgi?id=18778
If dlopen fails to load an object that has triggered loading libpthread it
causes ld.so to unload libpthread because its DF_1_NODELETE flags has been
forcefully cleared. The next call to __rtdl_unlock_lock_recursive will crash
since pthread_mutex_unlock no longer exists.
This patch moves l->l_flags_1 &= ~DF_1_NODELETE out of loop through all loaded
libraries and performs the action only on inconsistent one.
[BZ #18778]
* elf/Makefile (tests): Add Add tst-nodelete2.
(modules-names): Add tst-nodelete2mod.
(tst-nodelete2mod.so-no-z-defs): New.
($(objpfx)tst-nodelete2): Likewise.
($(objpfx)tst-nodelete2.out): Likewise.
(LDFLAGS-tst-nodelete2): Likewise.
* elf/dl-close.c (_dl_close_worker): Move DF_1_NODELETE clearing
out of loop through all loaded libraries.
* elf/tst-nodelete2.c: New file.
* elf/tst-nodelete2mod.c: Likewise.
ldbl-128ibm tanhl uses a too-small threshold to decide when to return
+/-1, resulting in large errors. This patch changes it to a more
appropriate threshold (the requirement is for 2*exp(-2|x|) to be small
in terms of ulps of 1).
Tested for x86_64, x86 and powerpc.
[BZ #18790]
* sysdeps/ieee754/ldbl-128ibm/s_tanhl.c (__tanhl): Increase
threshold for returning +/- 1.
* math/auto-libm-test-in: Add more tests of tanh.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
ldbl-128ibm sinhl uses a too-big threshold to decide when to return
the argument, resulting in large errors. This patch fixes it to use a
more appropriate threshold.
Tested for x86_64, x86 and powerpc.
[BZ #18789]
* sysdeps/ieee754/ldbl-128ibm/e_sinhl.c (__ieee754_sinhl): Use
smaller threshold for returning the argument.
* math/auto-libm-test-in: Add more tests of sinh.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
The attached change fixes the miscompilation of sched_setaffinity() on
hppa. This is an old problem that was fixed on other architectures using
a similar approach to the attached change. See:
https://sourceware.org/ml/libc-hacker/2004-04/msg00016.html
Build tested on trunk. Patch has been applied to debian glibc for some time.
As noted in the bug, the asm operands need to be copied to register
variables to avoid operand reloads in the principal asm of the macro.
See the arm implementation for reference. Otherwise we get:
../sysdeps/unix/sysv/linux/hppa/bits/atomic.h:68:6: error:
can't find a register in class 'R1_REGS' while reloading 'asm'
Build tested on trunk with gcc-4.8. Similar patch has been tested
with 2.19 on Debian hppa-unknown-linux-gnu.
Similar to various other bugs in this area, some tan implementations
do not raise the underflow exception for subnormal arguments, when the
result is tiny and inexact. This patch forces the exception in a
similar way to previous fixes.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #16517]
* sysdeps/ieee754/dbl-64/s_tan.c: Include <float.h>.
(tan): Force underflow exception for arguments with small absolute
value.
* sysdeps/ieee754/flt-32/k_tanf.c: Include <float.h>.
(__kernel_tanf): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/ldbl-128/k_tanl.c: Include <float.h>.
(__kernel_tanl): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/ldbl-128ibm/k_tanl.c: Include <float.h>.
(__kernel_tanl): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/ldbl-96/k_tanl.c: Include <float.h>.
(__kernel_tanl): Force underflow exception for arguments with
small absolute value.
* math/auto-libm-test-in: Add more tests of tan.
* math/auto-libm-test-out: Regenerated.
Similar to various other bugs in this area, some sinh implementations
do not raise the underflow exception for subnormal arguments, when the
result is tiny and inexact. This patch forces the exception in a
similar way to previous fixes.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #16519]
* sysdeps/ieee754/dbl-64/e_sinh.c: Include <float.h>.
(__ieee754_sinh): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/flt-32/e_sinhf.c: Include <float.h>.
(__ieee754_sinhf): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/ldbl-128/e_sinhl.c: Include <float.h>.
(__ieee754_sinhl): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/ldbl-128ibm/e_sinhl.c: Include <float.h>.
(__ieee754_sinhl): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/ldbl-96/e_sinhl.c: Include <float.h>.
(__ieee754_sinhl): Force underflow exception for arguments with
small absolute value.
* math/auto-libm-test-in: Add more tests of sinh.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
In the "Kill regexp.h" thread, Joseph dug up more accurate information
about exactly which editions of the Single Unix Standard included and
deprecated this header.
The flt-32 implementation of powf wrongly uses x-1 instead of |x|-1
when computing log (x) for the case where |x| is close to 1 and y is
large. This patch fixes the logic accordingly. Relevant tests
existed for x close to 1, and corresponding tests are added for x
close to -1, as well as for some new variant cases.
Tested for x86_64 and x86.
[BZ #18647]
* sysdeps/ieee754/flt-32/e_powf.c (__ieee754_powf): For large y
and |x| close to 1, use absolute value of x when computing log.
* math/auto-libm-test-in: Add more tests of pow.
* math/auto-libm-test-out: Regenerated.
as discussed in the thread starting at
https://sourceware.org/ml/libc-alpha/2015-06/msg00098.html
it looks like the best options is to remove locale timezone information
from locales which currently provide it (in incomplete or incorrect
fashion) rather than to start duplicating tzdata info in glibc.
This patch adds __nonnull annotations for wcscat, wcsncat, wcscmp and wcsncmp.
These added annotations match the annoations for strcat, strncat, strcmp, strncmp in glibc.
<regexp.h> (not to be confused with <regex.h>) is an obsolete and
frankly horrible regular expression-matching API. It was part of SVID
but was withdrawn in Issue 5 (for reference, we're on Issue 7 now).
It doesn't do anything you can't do with <regex.h>, and using it
involves defining a bunch of macros before including the header.
Moreover, the code in regexp.h that uses those macros has been buggy
since its creation (in 1996) and no one has noticed, which indicates
to me that there are no users. (Specifically, RETURN() is used in a
whole bunch of cases where it should have been ERROR().)
The header is given a warning and marked deprecated for 2.22.
See:
https://sourceware.org/ml/libc-alpha/2015-07/msg00862.html and
https://sourceware.org/ml/libc-alpha/2015-07/msg00871.html.
On x86, linker in binutils 2.26 and newer consolidates R_*_JUMP_SLOT with
R_*_GLOB_DAT relocation against the same symbol. This patch extends
local PLT reference check to support alternate relocations.
[BZ #18078]
* scripts/check-localplt.awk: Support alternate relocations.
* scripts/localplt.awk: Also check relocations in DT_RELA/DT_REL
sections.
* sysdeps/unix/sysv/linux/i386/localplt.data: Mark free and
malloc entries with + REL R_386_GLOB_DAT.
* sysdeps/x86_64/localplt.data: New file.
Changes in support of -fno-plt also cause the elf/tst-audit* tests to
start passing on MIPS. This patch duly marks the relevant bug as
fixed in ChangeLog and NEWS.
The recently introduced TLS variables in the thread-local destructor
implementation (__cxa_thread_atexit_impl) used the default GD access
model, resulting in a call to __tls_get_addr. This causes a deadlock
with recent changes to the way TLS is initialized because DTV
allocations are delayed and hence despite knowing the offset to the
variable inside its TLS block, the thread has to take the global rtld
lock to safely update the TLS offset.
This causes deadlocks when a thread is instantiated and joined inside
a destructor of a dlopen'd DSO. The correct long term fix is to
somehow not take the lock, but that will need a lot deeper change set
to alter the way in which the big rtld lock is used.
Instead, this patch just eliminates the call to __tls_get_addr for the
thread-local variables inside libc.so, libpthread.so and rtld by
building all of their units with -mtls-model=initial-exec.
There were concerns that the static storage for TLS is limited and
hence we should not be using it. Additionally, dynamically loaded
modules may result in libc.so looking for this static storage pretty
late in static binaries. Both concerns are valid when using TLSDESC
since that is where one may attempt to allocate a TLS block from
static storage for even those variables that are not IE. They're not
very strong arguments for the traditional TLS model though, since it
assumes that the static storage would be used sparingly and definitely
not by default. Hence, for now this would only theoretically affect
ARM architectures.
The impact is hence limited to statically linked binaries that dlopen
modules that in turn load libc.so, all that on arm hardware. It seems
like a small enough impact to justify fixing the larger problem that
currently affects everything everywhere.
This still does not solve the original problem completely. That is,
it is still possible to deadlock on the big rtld lock with a small
tweak to the test case attached to this patch. That problem is
however not a regression in 2.22 and hence could be tackled as a
separate project. The test case is picked up as is from Alex's patch.
This change has been tested to verify that it does not cause any
issues on x86_64.
ChangeLog:
[BZ #18457]
* nptl/Makefile (tests): New test case tst-join7.
(modules-names): New test case module tst-join7mod.
* nptl/tst-join7.c: New file.
* nptl/tst-join7mod.c: New file.
* Makeconfig (tls-model): Pass -ftls-model=initial-exec for
all translation units in libc.so, libpthread.so and rtld.
When an TLS destructor is registered, we set the DF_1_NODELETE flag to
signal that the object should not be destroyed. We then clear the
DF_1_NODELETE flag when all destructors are called, which is wrong -
the flag could have been set by other means too.
This patch replaces this use of the flag by using l_tls_dtor_count
directly to determine whether it is safe to unload the object. This
change has the added advantage of eliminating the lock taking when
calling the destructors, which could result in a deadlock. The patch
also fixes the test case tst-tls-atexit - it was making an invalid
dlclose call, which would just return an error silently.
I have also added a detailed note on concurrency which also aims to
justify why I chose the semantics I chose for accesses to
l_tls_dtor_count. Thanks to Torvald for his help in getting me
started on this and (literally) teaching my how to approach the
problem.
Change verified on x86_64; the test suite does not show any
regressions due to the patch.
ChangeLog:
[BZ #18657]
* elf/dl-close.c (_dl_close_worker): Don't unload DSO if there
are pending TLS destructor calls.
* include/link.h (struct link_map): Add concurrency note for
L_TLS_DTOR_COUNT.
* stdlib/cxa_thread_atexit_impl.c (__cxa_thread_atexit_impl):
Don't touch the link map flag. Atomically increment
l_tls_dtor_count.
(__call_tls_dtors): Atomically decrement l_tls_dtor_count.
Avoid taking the load lock and don't touch the link map flag.
* stdlib/tst-tls-atexit-nodelete.c: New test case.
* stdlib/Makefile (tests): Use it.
* stdlib/tst-tls-atexit.c (do_test): dlopen
tst-tls-atexit-lib.so again before dlclose. Add conditionals
to allow tst-tls-atexit-nodelete test case to use it.
Commit a059d359d8 changed the sigaction
struct to pass conform tests, but it ended up also changing the ABI for
32 bit builds. For 64 bit builds, changing the long to two ints works,
but for 32 bit builds, it inserts 4 extra bytes. This leads to many
packages randomly failing like bash that spews things like:
configure: line 471: wait_for: No record of process 0
Bracket the new member by a wordsize check to fix the ABI for 32bit.
X86 struct siginfo in kernel 3.19 has been changed by
commit ee1b58d36aa1b5a79eaba11f5c3633c88231da83
Author: Qiaowei Ren <qiaowei.ren@intel.com>
Date: Fri Nov 14 07:18:19 2014 -0800
mpx: Extend siginfo structure to include bound violation information
This patch adds new fields about bound violation into siginfo
structure. si_lower and si_upper are respectively lower bound
and upper bound when bound violation is caused.
This patch updates x86 struct siginfo to enable GDB with MPX support.
[BZ #18696]
* sysdeps/unix/sysv/linux/x86/bits/siginfo.h (_sigfault): Add
si_addr_bnd.
(si_lower): New.
(si_upper): Likewise.
The DF_1_NODELETE flag is set too late when opening a DSO, due to
which, if a DSO is already open, subsequently opening it with
RTLD_NODELETE fails to set the DF_1_NODELETE flag. This patch fixes
this by setting the flag immediately after bumping the opencount.
Verified on x86_64.
[BZ #18676]
* elf/tst-nodelete-opened.c: New test case.
* elf/tst-nodelete-opened-lib.c: New test case module.
* elf/Makefile (tests, modules-names): Use them.
* elf/dl-open.c (dl_open_worker): Set DF_1_NODELETE flag
early.
Bhili [1] and Tulu [2] language does not have iso-639-1 codes. Patch
moves locale file with correct code and also fix iso-639.def.
1. http://www-01.sil.org/iso639-3/documentation.asp?id=bhb
2. http://www-01.sil.org/iso639-3/documentation.asp?id=tcy
localedata/ChangeLog:
2015-07-02 Pravin Satpute <psatpute@redhat.com>
[BZ #17475]
* locales/tu_IN: renamed to tcy_IN
* locales/bh_IN: renamed to bhb_IN
Changelog:
2015-03-05 Pravin Satpute <psatpute@redhat.com>
[BZ #17475]
* locale/iso-639.def: Update Bhili and Tulu language codes as
per iso639-3.
and also powerpc64 and powerpc64le. See the discussion in the thread
below for details. This change reverts the problematic bits leaving
the added test in place and marking XFAIL in anticipation of fixing
the bug in the near future.
https://sourceware.org/ml/libc-alpha/2015-07/msg00141.html
[BZ #18435]
* nptl/pthreadP.h (pthread_cleanup_push, pthread_cleanup_pop):
Revert commit ed225df3ad.
* nptl/Makefile (test-xfail-tst-once5): Define.
We need to save/restore bound registers and add a BND prefix before
branches in _dl_runtime_profile so that bound registers for pointer
pass and return are preserved when LD_AUDIT is used.
[BZ #18134]
* sysdeps/i386/configure.ac: Set HAVE_MPX_SUPPORT.
* sysdeps/i386/configure: Regenerated.
* sysdeps/i386/dl-trampoline.S (PRESERVE_BND_REGS_PREFIX): New.
(_dl_runtime_profile): Save and restore Intel MPX return bound
registers when calling _dl_call_pltexit. Add
PRESERVE_BND_REGS_PREFIX before return.
* sysdeps/i386/link-defines.sym (LRV_BND0_OFFSET): New.
(LRV_BND1_OFFSET): Likewise.
* sysdeps/x86/bits/link.h (La_i86_retval): Add lrv_bnd0 and
lrv_bnd1.
* sysdeps/x86_64/dl-trampoline.S (_dl_runtime_profile): Fix
typo in bndmov encoding.
* sysdeps/x86_64/dl-trampoline.h: Properly save and restore
Intel MPX bound registers. Add PRESERVE_BND_REGS_PREFIX before
branch instructions to preserve bounds.
This is an ABI breaking change, but
typedef int greg_t;
is not a useful definition on aarch64.
greg_t is usually used for defining gregset_t which is used
in mcontext_t. The general registers in mcontext_t can only
be accessed by target specific code and on aarch64 greg_t
is not needed for that so this change is not supposed to break
existing code, just fix the definition.
[BZ #18648]
* sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h (greg_t): Change the
definition to elf_greg_t.
(Added another BZ entry that was missed in the previous commit).
This patch added a new fmemopen version, for glibc 2.22, that aims to be
POSIX complaint. It fixes some long-stading glibc fmemopen issues, such
as:
* it changes the way fseek with SEEK_END works on fmemopen to seek
relative to buffer size instead of first '\0'. This is default mode and
'b' opening mode does not change internal behavior (bz#6544).
* fix apending opening mode to use as start position either first null
byte of len specified in function call (bz#13152 and #13151).
* remove binary option 'b' and internal different handling (bz#12836)
* fix seek/SEE_END with negative values (bz#14292).
A compatibility symbol is provided to with old behavior for older symbols
version (2.2.5).
* include/stdio.h (fmemopen): Remove hidden prototype.
(__fmemopen): Add new hidden prototype.
* libio/Makefile: Add oldfmemopen object.
* libio/Versions [GLIBC_2.22]: Add new fmemopen symbol.
* libio/fmemopen.c (__fmemopen): Function rewrite to be POSIX
compliance.
* libio/oldfmemopen.c: New file: old fmemopen implementation for
symbol compatibility.
* stdio-common/Makefile [tests]: Add new tst-fmemopen3.
* stdio-common/psiginfo.c [psiginfo]: Call __fmemopen instead of
fmemopen.
* stdio-common/tst-fmemopen3.c: New file: more fmemopen tests, focus
on append and read mode.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist [GLIBC_2.22]: Add
fmemopen.
* sysdeps/unix/sysv/linux/alpha/libc.abilist [GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/arm/libc.abilist [GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist [GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist [GLIBC_2.22]:
Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist [GLIBC_2.22]:
Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist [GLIBC_2.22]:
Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist [GLIBC_2.22]:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist [GLIBC_2.22]:
Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist [GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist [GLIBC_2.22]:
Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist [GLIBC_2.22]:
Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist [GLIBC_2.22]:
Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist [GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist [GLIBC_2.22]: Likewise.
Mark all the functions that don't handle NULL pointers as __nonnull.
POSIX does not require either behavior, so the prototypes should match
the reality of the codebase.
Fixes bug 18557.
The ruserok API does hosts checks first while it walks the
user's ~/.rhosts file. This results in lots of DNS queries
that could have been skipped if we short-circuit test the
user portion first to see if would have had a failed match.
This supports configurations where rlogin is used on internal
secure networks with large numbers of users and machines.
The Red Hat QE team did extensive testing on various rlogin
combinations to validate this change, and in fact we found
a defect in the first version which is fixed in this version.
https://sourceware.org/bugzilla/show_bug.cgi?id=17833
I've a shared library that contains both undefined and unique symbols.
Then I try to call the following sequence of dlopen:
1. dlopen("./libfoo.so", RTLD_NOW)
2. dlopen("./libfoo.so", RTLD_LAZY | RTLD_GLOBAL)
First dlopen call terminates with error because of undefined symbols,
but STB_GNU_UNIQUE ones set DF_1_NODELETE flag and hence block library
in the memory.
The library goes into inconsistent state as several structures remain
uninitialized. For instance, relocations for GOT table were not performed.
By the time of second dlopen call this library looks like as it would be
fully initialized but this is not true: any call through incorrect GOT
table leads to segmentation fault. On some systems this inconsistency
triggers assertions in the dynamic linker.
This patch adds a parameter to _dl_close_worker to implement forced object
deletion in case of dlopen() failure:
1. Clears DF_1_NODELETE bit if forced, to allow library to be removed from
memory.
2. For each unique symbol that is defined in this object clears
appropriate entry in _ns_unique_sym_table.
[BZ #17833]
* elf/Makefile (tests): Add tst-nodelete.
(modules-names): Add tst-nodelete-uniquemod.
(tst-nodelete-uniquemod.so-no-z-defs): New.
(tst-nodelete-rtldmod.so-no-z-defs): Likewise.
(tst-nodelete-zmod.so-no-z-defs): Likewise.
($(objpfx)tst-nodelete): Likewise.
($(objpfx)tst-nodelete.out): Likewise.
(LDFLAGS-tst-nodelete): Likewise.
(LDFLAGS-tst-nodelete-zmod.so): Likewise.
* elf/dl-close.c (_dl_close_worker): Add a parameter to
implement forced object deletion.
(_dl_close): Pass false to _dl_close_worker.
* elf/dl-open.c (_dl_open): Pass true to _dl_close_worker.
* elf/tst-nodelete.cc: New file.
* elf/tst-nodeletelib.cc: Likewise.
* elf/tst-znodeletelib.cc: Likewise.
* include/dlfcn.h (_dl_close_worker): Add a new parameter.
On s390/s390x backtrace(buffer, size) returns the series of called functions until
"makecontext_ret" and additional entries (up to "size") with "makecontext_ret".
GDB-backtrace is also warning:
"Backtrace stopped: previous frame identical to this frame (corrupt stack?)"
To reproduce this scenario you have to setup a new context with makecontext()
and activate it with setcontext(). See e.g. cf() function in testcase stdlib/tst-makecontext.c.
Or see bug in libgo "Bug 66303 - runtime.Caller() returns infinitely deep stack frames
on s390x " (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=66303).
This patch omits the cfi_startproc/cfi_endproc directives in ENTRY/END macro of
__makecontext_ret. Thus no frame information is generated in .eh_frame and backtrace
stops after __makecontext_ret. There is also no .eh_frame info for _start or
thread_start functions.
ChangeLog:
[BZ #18508]
* stdlib/Makefile ($(objpfx)tst-makecontext3):
Depend on $(libdl).
* stdlib/tst-makecontext.c (cf): Test if _Unwind_Backtrace
is not called infinitely times.
(backtrace_helper): New function.
(trace_arg): New struct.
(st1): Enlarge stack size.
* sysdeps/unix/sysv/linux/s390/s390-32/__makecontext_ret.S:
(__makecontext_ret): Omit cfi_startproc and cfi_endproc.
* sysdeps/unix/sysv/linux/s390/s390-64/__makecontext_ret.S:
Likewise.
Some of the x86 string functions create pointers based on input strings
that may be outside of the input strings. When this happens in C code,
the compiler can potentially detect this, leading to warnings in
application code when those string functions are inlined. Perform those
operations in the assembly code instead of the C code to fix this.
In the ldbl-128 implementation of expm1l, when expm1l's result should
underflow to 0 (argument minus the least subnormal, in some rounding
modes), it can be a zero of the wrong sign. This patch fixes this in
the same way previously used for the x86 / x86_64 versions.
Tested for mips64.
[BZ #18619]
* sysdeps/ieee754/ldbl-128/s_expm1l.c (__expm1l): Force underflow
and return argument in case of subnormal argument.
the initialization routine to exit by throwing an exception.
Such an execution, termed exceptional, requires call_once to
propagate the exception to its caller. A program may contain
any number of exceptional executions but only one returning
execution (which, if it exists, must be the last execution
with the same once flag).
On POSIX systems such as Linux, std::call_once is implemented
in terms of pthread_once. However, as discussed in libstdc++
bug 66146 - "call_once not C++11-compliant on ppc64le," GLIBC's
pthread_once hangs when the initialization function exits by
throwing an exception on at least arm and ppc64 (though
apparently not on x86_64). This effectively prevents call_once
from conforming to the C++ requirements since there doesn't
appear to be a thread-safe way to work around this problem in
libstdc++.
This patch changes pthread_once to handle gracefully init
functions that exit by throwing exceptions. It was successfully
tested on ppc64, ppc64le, and x86_64.
[BZ #18435]
* nptl/Makefile: Add tst-once5.cc.
* nptl/pthreadP.h (pthread_cleanup_push, pthread_cleanup_pop):
Remove macro redefinitions.
* nptl/tst-once5.cc: New test.
In non-default rounding modes, tgamma can be slightly less accurate
than permitted by glibc's accuracy goals.
Part of the problem is error accumulation, addressed in this patch by
setting round-to-nearest for internal computations. However, there
was also a bug in the code dealing with computing pow (x + n, x + n)
where x + n is not exactly representable, providing another source of
error even in round-to-nearest mode; it was necessary to address both
bugs to get errors for all testcases within glibc's accuracy goals.
Given this second fix, accuracy in round-to-nearest mode is also
improved (hence regeneration of ulps for tgamma should be from scratch
- truncate libm-test-ulps or at least remove existing tgamma entries -
so that the expected ulps can be reduced).
Some additional complications also arose. Certain tgamma tests should
strictly, according to IEEE semantics, overflow or not depending on
the rounding mode; this is beyond the scope of glibc's accuracy goals
for any function without exactly-determined results, but
gen-auto-libm-tests doesn't handle being lax there as it does for
underflow. (libm-test.inc also doesn't handle being lax about whether
the result in cases very close to the overflow threshold is infinity
or a finite value close to overflow, but that doesn't cause problems
in this case though I've seen it cause problems with random test
generation for some functions.) Thus, spurious-overflow markings,
with a comment, are added to auto-libm-test-in (no bug in Bugzilla
because the issue is with the testsuite, not a user-visible bug in
glibc). And on x86, after the patch I saw ERANGE issues as previously
reported by Carlos (see my commentary in
<https://sourceware.org/ml/libc-alpha/2015-01/msg00485.html>), which
needed addressing by ensuring excess range and precision were
eliminated at various points if FLT_EVAL_METHOD != 0.
I also noticed and fixed a cosmetic issue where 1.0f was used in long
double functions and should have been 1.0L.
This completes the move of all functions to testing in all rounding
modes with ALL_RM_TEST, so gen-libm-have-vector-test.sh is updated to
remove the workaround for some functions not using ALL_RM_TEST.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #18613]
* sysdeps/ieee754/dbl-64/e_gamma_r.c (gamma_positive): Take log of
X_ADJ not X when adjusting exponent.
(__ieee754_gamma_r): Do intermediate computations in
round-to-nearest then adjust overflowing and underflowing results
as needed.
* sysdeps/ieee754/flt-32/e_gammaf_r.c (gammaf_positive): Take log
of X_ADJ not X when adjusting exponent.
(__ieee754_gammaf_r): Do intermediate computations in
round-to-nearest then adjust overflowing and underflowing results
as needed.
* sysdeps/ieee754/ldbl-128/e_gammal_r.c (gammal_positive): Take
log of X_ADJ not X when adjusting exponent.
(__ieee754_gammal_r): Do intermediate computations in
round-to-nearest then adjust overflowing and underflowing results
as needed. Use 1.0L not 1.0f as numerator of division.
* sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c (gammal_positive): Take
log of X_ADJ not X when adjusting exponent.
(__ieee754_gammal_r): Do intermediate computations in
round-to-nearest then adjust overflowing and underflowing results
as needed. Use 1.0L not 1.0f as numerator of division.
* sysdeps/ieee754/ldbl-96/e_gammal_r.c (gammal_positive): Take log
of X_ADJ not X when adjusting exponent.
(__ieee754_gammal_r): Do intermediate computations in
round-to-nearest then adjust overflowing and underflowing results
as needed. Use 1.0L not 1.0f as numerator of division.
* math/libm-test.inc (tgamma_test_data): Remove one test. Moved
to auto-libm-test-in.
(tgamma_test): Use ALL_RM_TEST.
* math/auto-libm-test-in: Add one test of tgamma. Mark some other
tests of tgamma with spurious-overflow.
* math/auto-libm-test-out: Regenerated.
* math/gen-libm-have-vector-test.sh: Do not check for START.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
The ldbl-128 implementation of j1l produces spurious underflow
exceptions for some small arguments, as a result of squaring the
argument. This patch fixes it just to use a linear approximation for
sufficiently small arguments, and then to force an underflow exception
only in the cases where it is required.
Tested for mips64.
[BZ #18612]
* sysdeps/ieee754/ldbl-128/e_j1l.c (__ieee754_j1l): For small
arguments, just return 0.5 times the argument, with underflow
forced as needed.
* math/auto-libm-test-in: Add more tests of j1.
* math/auto-libm-test-out: Regenerated.
Similar to various other bugs in this area, j1 and jn implementations
can fail to raise the underflow exception when the internal
computation is exact although the actual function is inexact. This
patch forces the exception in a similar way to other such fixes. (The
ldbl-128 / ldbl-128ibm j1l implementation is different and doesn't
need a change for this until spurious underflows in it are fixed.)
Tested for x86_64, x86, mips64 and powerpc.
[BZ #16559]
* sysdeps/ieee754/dbl-64/e_j1.c: Include <float.h>.
(__ieee754_j1): Force underflow exception for small results.
* sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_jn): Likewise.
* sysdeps/ieee754/flt-32/e_j1f.c: Include <float.h>.
(__ieee754_j1f): Force underflow exception for small results.
* sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_jnf): Likewise.
* sysdeps/ieee754/ldbl-128/e_jnl.c (__ieee754_jnl): Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_jnl.c (__ieee754_jnl): Likewise.
* sysdeps/ieee754/ldbl-96/e_j1l.c: Include <float.h>.
(__ieee754_j1l): Force underflow exception for small results.
* sysdeps/ieee754/ldbl-96/e_jnl.c (__ieee754_jnl): Likewise.
* math/auto-libm-test-in: Add more tests of j1 and jn.
* math/auto-libm-test-out: Regenerated.
mksquashfs was reported in openSUSE to be causing segmentation faults when
creating installation images. Testing showed that mksquashfs sometimes
failed and could be reproduced within 10 attempts. The core dump looked
like the heap top was corrupted and was pointing to an unmapped area. In
other cases, this has been due to an application corrupting glibc structures
but mksquashfs appears to be fine in this regard.
The problem is that heap_trim is "growing" the top into unmapped space.
If the top chunk == MINSIZE then top_area is -1 and this check does not
behave as expected due to a signed/unsigned comparison
if (top_area <= pad)
return 0;
The next calculation extra = ALIGN_DOWN(top_area - pad, pagesz) calculates
extra as a negative number which also is unnoticed due to a signed/unsigned
comparison. We then call shrink_heap(heap, negative_number) which crashes
later. This patch adds a simple check against MINSIZE to make sure extra
does not become negative. It adds a cast to hint to the reader that this
is a signed vs unsigned issue.
Without the patch, mksquash fails within 10 attempts. With it applied, it
completed 1000 times without error. The standard test suite "make check"
showed no changes in the summary of test results.
Some existing jn tests, if run in non-default rounding modes, produce
errors above those accepted in glibc, which causes problems for moving
tests of jn to use ALL_RM_TEST. This patch makes jn set rounding
to-nearest internally, as was done for yn some time ago, then computes
the appropriate underflowing value for results that underflowed to
zero in to-nearest, and moves the tests to ALL_RM_TEST. It does
nothing about the general inaccuracy of Bessel function
implementations in glibc, though it should make jn more accurate on
average in non-default rounding modes through reduced error
accumulation. The recomputation of results that underflowed to zero
should as a side-effect fix some cases of bug 16559, where jn just
used an exact zero, but that is *not* the goal of this patch and other
cases of that bug remain unfixed.
(Most of the changes in the patch are reindentation to add new scopes
for SET_RESTORE_ROUND*.)
Tested for x86_64, x86, powerpc and mips64.
[BZ #16559]
[BZ #18602]
* sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_jn): Set
round-to-nearest internally then recompute results that
underflowed to zero in the original rounding mode.
* sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_jnf): Likewise.
* sysdeps/ieee754/ldbl-128/e_jnl.c (__ieee754_jnl): Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_jnl.c (__ieee754_jnl): Likewise.
* sysdeps/ieee754/ldbl-96/e_jnl.c (__ieee754_jnl): Likewise
* math/libm-test.inc (jn_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
To support building glibc with GCC 6 configured with --enable-default-pie,
which generates PIE by default, we need to build programs as PIE. But
elf/tst-dlopen-aout must not be built as PIE since it tests dlopen on
ET_EXEC file and PIE is ET_DYN.
[BZ #17841]
* Makeconfig (no-pie-ldflag): New.
(+link): Set to $(+link-pie) if default to PIE.
(+link-tests): Set to $(+link-pie-tests) if default to PIE.
* config.make.in (build-pie-default): New.
* configure.ac (libc_cv_pie_default): New. Set to yes if -fPIE
is default. AC_SUBST.
* configure: Regenerated.
* elf/Makefile (LDFLAGS-tst-dlopen-aout): New.
cexp, ccos, ccosh, csin and csinh have spurious underflows in cases
where they compute sin of the smallest normal, that produces an
underflow exception (depending on which sin implementation is in use)
but the final result does not underflow. ctan and ctanh may also have
such underflows, or they may be latent (the issue there is that
e.g. ctan (DBL_MIN) should, rounded upwards, be the next double value
above DBL_MIN, which under glibc's accuracy goals may not have an
underflow exception, but the intermediate computation of sin (DBL_MIN)
would legitimately underflow on before-rounding architectures).
This patch fixes all those functions so they use plain comparisons (>
DBL_MIN etc.) instead of comparing the result of fpclassify with
FP_SUBNORMAL (in all these cases, we already know the number being
compared is finite). Note that in the case of csin / csinf / csinl,
there is no need for fabs calls in the comparison because the real
part has already been reduced to its absolute value.
As the patch fixes the failures that previously obstructed moving
tests of cexp to use ALL_RM_TEST, those tests are moved to ALL_RM_TEST
by the patch (two functions remain yet to be converted).
Tested for x86_64 and x86 and ulps updated accordingly.
[BZ #18594]
* math/s_ccosh.c (__ccosh): Compare with least normal value
instead of comparing class with FP_SUBNORMAL.
* math/s_ccoshf.c (__ccoshf): Likewise.
* math/s_ccoshl.c (__ccoshl): Likewise.
* math/s_cexp.c (__cexp): Likewise.
* math/s_cexpf.c (__cexpf): Likewise.
* math/s_cexpl.c (__cexpl): Likewise.
* math/s_csin.c (__csin): Likewise.
* math/s_csinf.c (__csinf): Likewise.
* math/s_csinh.c (__csinh): Likewise.
* math/s_csinhf.c (__csinhf): Likewise.
* math/s_csinhl.c (__csinhl): Likewise.
* math/s_csinl.c (__csinl): Likewise.
* math/s_ctan.c (__ctan): Likewise.
* math/s_ctanf.c (__ctanf): Likewise.
* math/s_ctanh.c (__ctanh): Likewise.
* math/s_ctanhf.c (__ctanhf): Likewise.
* math/s_ctanhl.c (__ctanhl): Likewise.
* math/s_ctanl.c (__ctanl): Likewise.
* math/auto-libm-test-in: Add more tests of ccos, ccosh, cexp,
csin, csinh, ctan and ctanh.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (cexp_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
Many packages, including GCC, install Python files for GDB in library
diretory. ldconfig reads them and issue errors since they aren't ELF
files:
ldconfig: /usr/gcc-5.1.1/lib/libstdc++.so.6.0.21-gdb.py is not an ELF file - it has the wrong magic bytes at the start.
ldconfig: /usr/gcc-5.1.1/libx32/libstdc++.so.6.0.21-gdb.py is not an ELF file - it has the wrong magic bytes at the start.
ldconfig: /usr/gcc-5.1.1/lib64/libstdc++.so.6.0.21-gdb.py is not an ELF file - it has the wrong magic bytes at the start.
This patch silences ldconfig on GDB Python files by checking filenames
with -gdb.py suffix.
[BZ #18585]
* elf/readlib.c (is_gdb_python_file): New.
(process_file): Don't issue errors on filenames with -gdb.py
suffix.
csin and csinh can produce bad results when overflowing in directed
rounding modes, because a multiplication that can overflow is followed
by a possible negation. This patch fixes this by negating one of the
arguments of the multiplication before the multiplication instead of
negating the result.
The new tests for this issue are added to auto-libm-test-in, starting
use of that file for csin and csinh. The issue was found in the
course of moving existing tests for csin and csinh (existing tests, by
being enabled in more cases than previously, showed the issue for
float and double but not for long double); that move will now be done
separately.
Tested for x86_64 and x86 and ulps updated accordingly.
[BZ #18593]
* math/s_csin.c (__csin): Negate before rather than after possibly
overflowing multiplication.
* math/s_csinf.c (__csinf): Likewise.
* math/s_csinh.c (__csinh): Likewise.
* math/s_csinhf.c (__csinhf): Likewise.
* math/s_csinhl.c (__csinhl): Likewise.
* math/s_csinl.c (__csinl): Likewise.
* math/auto-libm-test-in: Add some tests of csin and csinh.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (csin_test_data): Use AUTO_TESTS_c_c.
(csinh_test_data): Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Update.
Similar to various other bugs in this area, the ldbl-128 expl
implementation does not raise the underflow exception for all
subnormal results, if the scaling down is exact although the actual
result is inexact. This patch fixes this by forcing the exception in
this case (the tests that failed before and pass after the test are
already in the testsuite).
Tested for mips64.
[BZ #18586]
* sysdeps/ieee754/ldbl-128/e_expl.c (__ieee754_expl): Force
underflow exception for small results.
Similar to various other bugs in this area, some sin and sincos
implementations do not raise the underflow exception for subnormal
arguments, when the result is tiny and inexact. This patch forces the
exception in a similar way to previous fixes.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #16526]
[BZ #16538]
* sysdeps/ieee754/dbl-64/s_sin.c: Include <float.h>.
(__sin): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/flt-32/k_sinf.c: Include <float.h>.
(__kernel_sinf): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/ldbl-128/k_sincosl.c: Include <float.h>.
(__kernel_sincosl): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/ldbl-128/k_sinl.c: Include <float.h>.
(__kernel_sinl): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/ldbl-128ibm/k_sincosl.c: Include <float.h>.
(__kernel_sincosl): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/ldbl-128ibm/k_sinl.c: Include <float.h>.
(__kernel_sinl): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/ldbl-96/k_sinl.c: Include <float.h>.
(__kernel_sinl): Force underflow exception for arguments with
small absolute value.
* sysdeps/powerpc/fpu/k_sinf.c: Include <float.h>.
(__kernel_sinf): Force underflow exception for arguments with
small absolute value.
* math/auto-libm-test-in: Add more tests of sin and sincos.
* math/auto-libm-test-out: Regenerated.
__kernel_standard_l converts long double arguments to double for use
in SVID "struct exception". This has special-case handling for when
that conversion would overflow or underflow but the original long
double function wouldn't. However, it turns out that "inexact"
exceptions can be spurious here as well, when the function is exactly
determined and __kernel_standard_l is being called for a domain error.
This patch fixes this by using feholdexcept / fesetenv to avoid
exceptions from the conversion, replacing the previous special-case
logic for overflow and underflow (this covers all functions using
__kernel_standard_l, not just those that actually need a change, since
there doesn't seem to be much point in restricting things just to the
functions that mustn't get "inexact" here).
Tested for x86_64 and x86.
[BZ #18245]
[BZ #18583]
* sysdeps/ieee754/k_standardl.c: Include <fenv.h>.
(__kernel_standard_l): Use feholdexcept and fesetenv around
conversion to double instead of special-casing overflow and
underflow.
* math/libm-test.inc (fmod_test_data): Add more tests.
(remainder_test_data): Likewise.
(sqrt_test_data): Likewise.
This fixes BZ #17403 by defining atomic_full_barrier,
atomic_read_barrier, and atomic_write_barrier on x86 and x86_64. A full
barrier is implemented through an atomic idempotent modification to the
stack and not through using mfence because the latter can supposedly be
somewhat slower due to having to provide stronger guarantees wrt.
self-modifying code, for example.
The csqrt implementations in glibc can cause spurious underflows in
some cases as a side-effect of the scaling for large arguments (when
underflow is correct for the square root of the argument that was
scaled down to avoid overflow, but not for the original argument).
This patch arranges to avoid the underflowing intermediate computation
(eliminating a multiplication in 0.5 in the problem cases where a
subsequent scaling by 2 would follow).
Tested for x86_64 and x86 and ulps updated accordingly (only needed
for x86).
[BZ #18371]
* math/s_csqrt.c (__csqrt): Avoid multiplication by 0.5 where
intermediate but not final result might underflow.
* math/s_csqrtf.c (__csqrtf): Likewise.
* math/s_csqrtl.c (__csqrtl): Likewise.
* math/auto-libm-test-in: Add more tests of csqrt.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
The dbl-64 and flt-32 implementations of exp2 functions produce
spurious underflow exceptions. The underlying reason is the same in
both cases: the computation works as (2^a - 1)*2^b + 2^b for suitably
chosen a and b, where a has small magnitude so 2^a - 1 can be computed
with a low-degree polynomial approximation, and (2^a - 1)*2^b can
underflow even when the final result does not. This patch fixes this
by adjusting the threshold for when scaling is used to avoid
intermediate underflow so it works for any possible value of a where
the final result would not underflow.
Tested for x86_64 and x86.
[BZ #18219]
* sysdeps/ieee754/dbl-64/e_exp2.c (__ieee754_exp2): Reduce
threshold on absolute value of exponent for which scaling is used.
* sysdeps/ieee754/flt-32/e_exp2f.c (__ieee754_exp2f): Likewise.
* math/auto-libm-test-in: Add more tests of exp2.
* math/auto-libm-test-out: Regenerated.
When "reorder" resolver option is enabled, threads of a multi-threaded process
could hang in gethostbyaddr_r, gethostbyname_r, or gethostbyname2_r.
Due to a trivial bug in _res_hconf_reorder_addrs, simultaneous
invocations of this function in a multi-threaded process could result to
_res_hconf_reorder_addrs returning without releasing the lock it holds,
causing other threads to block indefinitely while waiting for the lock
that is not going to be released.
[BZ #17977]
* resolv/res_hconf.c (_res_hconf_reorder_addrs): Fix unlocking
when initializing interface list, based on the bug analysis
and the patch proposed by Eric Newton.
* resolv/tst-res_hconf_reorder.c: New test.
* resolv/Makefile [$(have-thread-library) = yes] (tests): Add
tst-res_hconf_reorder.
($(objpfx)tst-res_hconf_reorder): Depend on $(libdl)
and $(shared-thread-library).
(tst-res_hconf_reorder-ENV): New variable.
Similar to various other bugs in this area, some expm1 implementations
do not raise the underflow exception for subnormal arguments, when the
result is tiny and inexact. This patch forces the exception in a
similar way to previous fixes.
(The issue does not apply to the ldbl-* implementations or to those
for x86 / x86_64 long double. The change to
sysdeps/ieee754/dbl-64/wordsize-64/e_cosh.c is one I missed when
previously fixing bug 16354; the bug in that implementation was
previously latent, but the expm1 fixes stopped it being latent and so
required it to be fixed to avoid spurious underflows from cosh.)
Tested for x86_64 and x86.
[BZ #16353]
* sysdeps/i386/fpu/s_expm1.S (dbl_min): New object.
(__expm1): Force underflow exception for arguments with small
absolute value.
* sysdeps/i386/fpu/s_expm1f.S (flt_min): New object.
(__expm1f): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/dbl-64/s_expm1.c: Include <float.h>.
(__expm1): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/flt-32/s_expm1f.c: Include <float.h>.
(__expm1f): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/dbl-64/wordsize-64/e_cosh.c (__ieee754_cosh):
Check for small arguments before calling __expm1.
* math/auto-libm-test-in: Do not mark underflow exceptions as
possibly missing for bug 16353.
* math/auto-libm-test-out: Regenerated.
In the x86 / x86_64 implementations of expm1l, when expm1l's result
should underflow to 0 (argument minus the least subnormal, in some
rounding modes), it can be a zero of the wrong sign. This patch fixes
this by returning the argument with underflow forced in that case
(this is a 1ulp error relative to the correctly rounded result of -0,
which is OK in terms of the documented accuracy goals, whereas a
result with the wrong sign never is).
Tested for x86_64 and x86.
[BZ #18569]
* sysdeps/i386/fpu/e_expl.S (IEEE754_EXPL) [USE_AS_EXPM1L]: Force
underflow and return argument in case of subnormal argument.
* sysdeps/x86_64/fpu/e_expl.S (IEEE754_EXPL) [USE_AS_EXPM1L]:
Likewise.
* math/auto-libm-test-in: Add more tests of expm1.
* math/auto-libm-test-out: Regenerated.
Similar to various other bugs in this area, the x86 and x86_64
implementations of expl / exp10l can fail to produce underflow
exceptions when the unscaled result has trailing 0 bits so the scaling
down to subnormal precision is exact. This patch fixes this by
forcing the exception in the case of tiny results.
Tested for x86_64 and x86.
[BZ #16361]
* sysdeps/i386/fpu/e_expl.S [!USE_AS_EXPM1L] (cmin): New object.
[!USE_AS_EXPM1L] (IEEE754_EXPL): Force underflow exception for
tiny results.
* sysdeps/x86_64/fpu/e_expl.S [!USE_AS_EXPM1L] (cmin): New object.
[!USE_AS_EXPM1L] (IEEE754_EXPL): Force underflow exception for
tiny results.
* math/auto-libm-test-in: Add more tests of exp and exp10. Do not
mark underflow exceptions as possibly missing for bug 16361.
* math/auto-libm-test-out: Regenerated.
Similar to various other bugs in this area, some asinh implementations
do not raise the underflow exception for subnormal arguments, when the
result is tiny and inexact. This patch forces the exception in a
similar way to previous fixes.
Tested for x86_64, x86 and mips64.
[BZ #16350]
* sysdeps/i386/fpu/s_asinh.S (__asinh): Force underflow exception
for arguments with small absolute value.
* sysdeps/i386/fpu/s_asinhf.S (__asinhf): Likewise.
* sysdeps/i386/fpu/s_asinhl.S (__asinhl): Likewise.
* sysdeps/ieee754/dbl-64/s_asinh.c: Include <float.h>.
(__asinh): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/flt-32/s_asinhf.c: Include <float.h>.
(__asinhf): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/ldbl-128/s_asinhl.c: Include <float.h>.
(__asinhl): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/ldbl-128ibm/s_asinhl.c: Include <float.h>.
(__asinhl): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/ldbl-96/s_asinhl.c: Include <float.h>.
(__asinhl): Force underflow exception for arguments with small
absolute value.
* math/auto-libm-test-in: Do not mark underflow exceptions as
possibly missing for bug 16350.
* math/auto-libm-test-out: Regenerated.
sysdeps/unix/sysv/linux/bits/in.h (as included in netinet/in.h, and
via that in netdb.h and arpa/inet.h) defines a series of MCAST_*
macros, both under __USE_MISC and then again unconditionally. These
are not POSIX macros, nor in any of the namespaces listed in POSIX as
reserved for this header, so should not be defined unconditionally.
This patch duly removes the unconditional definitions, leaving the
ones conditional on __USE_MISC.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
[BZ #18558]
* sysdeps/unix/sysv/linux/bits/in.h (MCAST_JOIN_GROUP): Remove
unconditional definition.
(MCAST_BLOCK_SOURCE): Likewise.
(MCAST_UNBLOCK_SOURCE): Likewise.
(MCAST_LEAVE_GROUP): Likewise.
(MCAST_JOIN_SOURCE_GROUP): Likewise.
(MCAST_LEAVE_SOURCE_GROUP): Likewise.
(MCAST_MSFILTER): Likewise.
* conform/Makefile (test-xfail-XOPEN2K/arpa/inet.h/conform):
Remove variable.
(test-xfail-XOPEN2K/netdb.h/conform): Likewise.
(test-xfail-XOPEN2K/netinet/in.h/conform): Likewise.
(test-xfail-XOPEN2K8/arpa/inet.h/conform): Likewise.
(test-xfail-XOPEN2K8/netdb.h/conform): Likewise.
(test-xfail-XOPEN2K8/netinet/in.h/conform): Likewise.
nice (XPG3) calls getpriority and setpriority (in XPG4 but not XPG3,
i.e. UX-shaded in XPG4). This patch fixes this by making those
functions into weak aliases of __* functions and calling the __*
versions as needed.
Tested for x86_64 and x86 (testsuite, and that disassembly of
installed shared libraries is unchanged by this patch).
This completes cleaning up the unsorted linknamespace test XFAILs.
[BZ #18553]
* resource/getpriority.c (getpriority): Rename to __getpriority
and define as weak alias of __getpriority.
* resource/setpriority.c (setpriority): Rename to __setpriority
and define as weak alias of __setpriority.
* sysdeps/mach/hurd/getpriority.c (getpriority): Rename to
__getpriority and define as weak alias of __getpriority.
* sysdeps/mach/hurd/setpriority.c (setpriority): Rename to
__setpriority and define as weak alias of __setpriority.
* sysdeps/unix/syscalls.list (getpriority): Use __getpriority as
strong name.
(setpriority): Use __setpriority as strong name.
* sysdeps/unix/sysv/linux/getpriority.c (getpriority): Rename to
__getpriority and define as weak alias of __getpriority.
* include/sys/resource.h (__getpriority): Declare. Use
libc_hidden_proto.
(__setpriority): Likewise.
(getpriority): Don't use libc_hidden_proto.
(setpriority): Likewise.
* sysdeps/posix/nice.c (nice): Call __getpriority instead of
getpriority. Call __setpriority instead of setpriority.
* conform/Makefile (test-xfail-XPG3/unistd.h/linknamespace):
Remove variable.
ttyslot (XPG4) calls the non-XPG4 functions endttyent, getttyent and
setttyent, which in turn bring in references to fgets_unlocked and
getttynam. This patch fixes this by making these functions into weak
aliases and calling the __* names as needed.
Tested for x86_64 and x86 (testsuite, and that disassembly of
installed stripped shared libraries is unchanged by the patch).
[BZ #18547]
* misc/getttyent.c (getttynam): Rename to __getttynam and define
as weak alias of __getttynam. Use prototype function definition.
Call __setttyent, __getttyent and __endttyent instead of
setttyent, getttyent and endttyent.
(getttyent): Rename to __getttyent and define as weak alias of
__getttyent. Call __setttyent instead of setttyent. Call
__fgets_unlocked instead of fgets_unlocked.
(setttyent): Rename to __setttyent and define as weak alias of
__setttyent.
(endttyent): Rename to __endttyent and define as weak alias of
__endttyent.
* include/ttyent.h (__getttyent): Declare. Use libc_hidden_proto.
(__setttyent): Likewise.
(__endttyent): Likewise.
(getttyent): Don't use libc_hidden_proto.
(setttyent): Likewise.
(endttyent): Likewise.
* misc/ttyslot.c (ttyslot): Call __setttyent, __getttyent and
__endttyent instead of setttyent, getttyent and endttyent.
* conform/Makefile (test-xfail-XPG4/unistd.h/linknamespace):
Remove variable.
mq_notify (in the 1996 edition of POSIX) brings in references to recv
and socket (not in POSIX until the 2001 edition). This patch fixes
this by using __recv and __socket, exporting them from libc at version
GLIBC_PRIVATE.
Tested for x86_64 and x86 (testsuite and comparison of installed
stripped shared libraries; PLT / dynamic symbol table changes render
the comparison not particularly useful for libc).
[BZ #18546]
* socket/recv.c (__recv): Use libc_hidden_def.
* socket/socket.c (__socket): Likewise.
* sysdeps/mach/hurd/recv.c (__recv): Likewise.
* sysdeps/mach/hurd/socket.c (__socket): Likewise.
* sysdeps/unix/sysv/linux/generic/recv.c (__recv): Likewise.
* sysdeps/unix/sysv/linux/recv.c (__recv): Use libc_hidden_weak.
* sysdeps/unix/sysv/linux/socket.c (__socket): Use
libc_hidden_def.
* sysdeps/unix/sysv/linux/x86_64/recv.c (__recv): Use
libc_hidden_weak.
* include/sys/socket.h (__socket): Do not use attribute_hidden.
Use libc_hidden_proto.
(__recv): Likewise.
* socket/Versions (libc): Export __recv and __socket at version
GLIBC_PRIVATE.
* sysdeps/unix/sysv/linux/mq_notify.c (helper_thread): Call __recv
instead of recv.
(init_mq_netlink): Call __socket instead of socket.
* conform/Makefile (test-xfail-POSIX/mqueue.h/linknamespace):
Remove variable.
mq_receive calls mq_timedreceive, and mq_send calls mq_timedsend. But
mq_receive and mq_send were in POSIX by 1996, while mq_timed* were
added in the 2001 edition of POSIX. This patch fixes this by making
mq_timed* into weak aliases for __mq_timed* and calling the
__mq_timed* names.
Tested for x86_64 and x86 (testsuite, and that disassembly of
installed shared libraries is unchanged by the patch).
[BZ #18545]
* rt/mq_timedreceive.c (mq_timedreceive): Rename to
__mq_timedreceive and define as alias of __mq_timedreceive. Use
hidden_weak.
* rt/mq_timedsend.c (mq_timedsend): Rename to __mq_timedsend and
define as alias of __mq_timedsend. Use hidden_weak.
* sysdeps/unix/sysv/linux/syscalls.list (mq_timedsend): Use
__mq_timedsend as strong name.
(mq_timedreceive): Use __mq_timedreceive as strong name.
* include/mqueue.h (__mq_timedsend): Declare. Use hidden_proto.
(__mq_timedreceive): Likewise.
* sysdeps/unix/sysv/linux/mq_receive.c (mq_receive): Call
__mq_timedreceive instead of mq_timedreceive.
* sysdeps/unix/sysv/linux/mq_send.c (mq_send): Call __mq_timedsend
instead of mq_timedsend.
* conform/Makefile (test-xfail-UNIX98/mqueue.h/linknamespace):
Remove variable.
mq_notify (present in POSIX by 1996) brings in references to
pthread_barrier_init and pthread_barrier_wait (new in the 2001 edition
of POSIX). This patch fixes this by making those functions into weak
aliases of __pthread_barrier_*, exporting the __pthread_barrier_*
names at version GLIBC_PRIVATE and using them in mq_notify.
Tested for x86_64 and x86 (testsuite, and comparison of installed
stripped shared libraries). Changes in addresses from dynamic symbol
table / PLT changes render most comparisons not particularly useful,
but when the addresses of subsequent code don't change there's no sign
of unexpected changes there. This patch does not remove any
linknamespace XFAILs because of other namespace issues remaining with
mqueue.h functions.
[BZ #18544]
* nptl/pthread_barrier_init.c (pthread_barrier_init): Rename to
__pthread_barrier_init and define as weak alias of
__pthread_barrier_init.
* sysdeps/sparc/nptl/pthread_barrier_init.c
(pthread_barrier_init): Likewise.
* nptl/pthread_barrier_wait.c (pthread_barrier_wait): Rename to
__pthread_barrier_wait and define as weak alias of
__pthread_barrier_wait.
* sysdeps/sparc/nptl/pthread_barrier_wait.c
(pthread_barrier_wait): Likewise.
* sysdeps/sparc/sparc32/pthread_barrier_wait.c
(pthread_barrier_wait): Likewise.
* sysdeps/unix/sysv/linux/i386/i486/pthread_barrier_wait.S
(pthread_barrier_wait): Likewise.
* sysdeps/unix/sysv/linux/x86_64/pthread_barrier_wait.S
(pthread_barrier_wait): Likewise.
* nptl/Versions (libpthread): Export __pthread_barrier_init and
__pthread_barrier_wait at version GLIBC_PRIVATE.
* include/pthread.h (__pthread_barrier_init): Declare.
(__pthread_barrier_wait): Likewise.
* sysdeps/unix/sysv/linux/mq_notify.c (notification_function):
Call __pthread_barrier_wait instead of pthread_barrier_wait.
(helper_thread): Likewise.
(init_mq_netlink): Call __pthread_barrier_init instead of
pthread_barrier_init.
swscanf (added in C90 Amendment 1, present in UNIX98) calls vswscanf
(added in C99, not in C90 Amendment 1 or UNIX98). This patch fixes
this by using __vswscanf instead and making vswscanf into a weak
alias.
(I intend to add conform/ test support for C90 Amendment 1 - and
various other standard versions supported by glibc but not yet by
conform/ tests - at some point, once the results for currently tested
standards are cleaner.)
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
[BZ #18542]
* libio/iovswscanf.c (__vswscanf): Use libc_hidden_def.
(vswscanf): Use ldbl_weak_alias instead of ldbl_strong_alias
* include/wchar.h (__vswscanf): Declare. Use libc_hidden_proto.
* libio/swscanf.c (__swscanf): Call __vswscanf instead of
vswscanf.
* conform/Makefile (test-xfail-UNIX98/wchar.h/linknamespace):
Remove variable.
The getpass function (XPG3 / XPG4 / UNIX98) calls fflush_unlocked (not
in any of those standards). This patch fixes this by making
fflush_unlocked into a weak alias for __fflush_unlocked and calling
__fflush_unlocked from getpass.
Tested for x86_64 and x86 (testsuite, and that disassembly of
installed stripped shared libraries is unchanged by the patch).
[BZ #18540]
* libio/iofflush.c [!_IO_MTSAFE_IO] (__fflush_unlocked): Define as
strong alias of _IO_fflush. Use libc_hidden_def.
* libio/iofflush_u.c (fflush_unlocked): Rename to
__fflush_unlocked and define as weak alias of __fflush_unlocked.
Use libc_hidden_weak.
* include/stdio.h (__fflush_unlocked): Declare. Use
libc_hidden_proto.
* misc/getpass.c (getpass): Call __fflush_unlocked instead of
fflush_unlocked.
* conform/Makefile (test-xfail-UNIX98/unistd.h/linknamespace):
Remove variable.
Use of fmtmsg (XSI POSIX) brings in addseverity (non-POSIX). This
patch fixes this by making addseverity into a weak alias for
__addseverity.
Tested for x86_64 and x86 (testsuite, and that disassembly of
installed shared libraries is unchanged by the patch).
[BZ #18539]
* stdlib/fmtmsg.c (addseverity): Rename to __addseverity and
define as weak alias of __addseverity.
* conform/Makefile (test-xfail-XPG4/fmtmsg.h/linknamespace):
Remove variable.
(test-xfail-UNIX98/fmtmsg.h/linknamespace): Likewise.
(test-xfail-XOPEN2K/fmtmsg.h/linknamespace): Likewise.
(test-xfail-XOPEN2K8/fmtmsg.h/linknamespace): Likewise.
The sem_* functions bring in references to tdelete, tfind, tsearch and
twalk. But the t* functions are XSI-shaded, while sem_* aren't. This
patch fixes this by using __t* instead, exporting those functions from
libc at version GLIBC_PRIVATE (since sem_* are in libpthread) and
using libc_hidden_* for the benefit of calls within libc.
Tested for x86_64 and x86 (testsuite, and comparison of disassembly of
installed stripped shared libraries). libpthread gets changes from
PLT reordering; addresses in libc change because of PLT / dynamic
symbol table changes.
[BZ #18536]
* misc/tsearch.c (__tsearch): Use libc_hidden_def.
(__tfind): Likewise.
(__tdelete): Likewise.
(__twalk): Likewise.
* misc/Versions (libc): Add __tdelete, __tfind, __tsearch and
__twalk to GLIBC_PRIVATE.
* include/search.h (__tsearch): Use libc_hidden_proto.
(__tfind): Likewise.
(__tdelete): Likewise.
(__twalk): Likewise.
* nptl/sem_close.c (sem_close): Call __twalk instead of twalk.
Call __tdelete instead of tdelete.
* nptl/sem_open.c (check_add_mapping): Call __tfind instead of
tfind. Call __tsearch instead of tsearch.
* sysdeps/sparc/sparc32/sem_open.c (check_add_mapping): Likewise.
* conform/Makefile (test-xfail-POSIX/semaphore.h/linknamespace):
Remove variable.
(test-xfail-POSIX2008/semaphore.h/linknamespace): Likewise.
syslog functions bring in references to dprintf, which wasn't added to
POSIX until the 2008 edition and so isn't in various standards
containing the syslog functions. This patch fixes this by making
dprintf into a weak alias of __dprintf and using __dprintf as
appropriate.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
[BZ #18534]
* stdio-common/dprintf.c (__dprintf): Use libc_hidden_def.
(dprintf): Define as a weak alias of __dprintf, not a strong
alias.
* include/stdio.h (__dprintf): Declare. Use libc_hidden_proto.
* misc/syslog.c (__vsyslog_chk): Call __dprintf instead of
dprintf.
* conform/Makefile (test-xfail-XPG4/syslog.h/linknamespace):
Remove variable.
(test-xfail-UNIX98/syslog.h/linknamespace): Likewise.
(test-xfail-XOPEN2K/syslog.h/linknamespace): Likewise.
syslog functions (in POSIX) bring in the strong symbol vsyslog (not in
POSIX). This patch fixes this by changing this symbol from a strong
alias to a weak alias.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch). (vsyslog becomes weak
in the static libraries, which is what's needed; the particular macro
sequence in use leaves it as strong in the shared libraries, hence
those libraries being completely unchanged, but it doesn't generally
matter whether symbols exported from the shared libraries are weak or
strong.)
[BZ #18533]
* misc/syslog.c (vsyslog): Define as a weak alias of __vsyslog,
not a strong alias.
* conform/Makefile (test-xfail-XOPEN2K8/syslog.h/linknamespace):
Remove variable.
gethostbyaddr brings in references to in6addr_any and thereby
in6addr_loopback, which aren't in all the standards containing
gethostbyaddr (gethostbyaddr is in XPG4 and UNIX98, in6addr_any and
in6addr_loopback are new in POSIX.1:2001). This patch fixes this by
making those symbols into weak aliases (safe in this case, unlike for
most data symbols, because these data symbols are const).
Tested for x86_64 and x86 (testsuite, and comparison of disassembly of
installed stripped shared libraries). Disassembly is unchanged for
x86_64; for x86, I see some changes of stack offsets, but no other
code generation changes or code size differences.
[BZ #18532]
* inet/in6_addr.c (in6addr_any): Rename to __in6addr_any and
define as weak alias of __in6addr_any. Use libc_hidden_data_weak.
(in6addr_loopback): Rename to __in6addr_loopback and define as
weak alias of __in6addr_loopback. Use libc_hidden_data_weak.
* include/netinet/in.h (__in6addr_loopback): Declare. Use
libc_hidden_proto.
(__in6addr_any): Likewise.
* inet/gethstbyad_r.c (PREPROCESS): Use __in6addr_any instead of
in6addr_any.
* conform/Makefile (test-xfail-XPG4/netdb.h/linknamespace): Remove
variable.
(test-xfail-UNIX98/netdb.h/linknamespace): Likewise.
Lazy TLSDESC initialization needs to be synchronized with concurrent TLS
accesses. The TLS descriptor contains a function pointer (entry) and an
argument that is accessed from the entry function. With lazy initialization
the first call to the entry function updates the entry and the argument to
their final value. A final entry function must make sure that it accesses an
initialized argument, this needs synchronization on systems with weak memory
ordering otherwise the writes of the first call can be observed out of order.
There are at least two issues with the current code:
tlsdesc.c (i386, x86_64, arm, aarch64) uses volatile memory accesses on the
write side (in the initial entry function) instead of C11 atomics.
And on systems with weak memory ordering (arm, aarch64) the read side
synchronization is missing from the final entry functions (dl-tlsdesc.S).
This patch only deals with aarch64.
* Write side:
Volatile accesses were replaced with C11 relaxed atomics, and a release
store was used for the initialization of entry so the read side can
synchronize with it.
* Read side:
TLS access generated by the compiler and an entry function code is roughly
ldr x1, [x0] // load the entry
blr x1 // call it
entryfunc:
ldr x0, [x0,#8] // load the arg
ret
Various alternatives were considered to force the ordering in the entry
function between the two loads:
(1) barrier
entryfunc:
dmb ishld
ldr x0, [x0,#8]
(2) address dependency (if the address of the second load depends on the
result of the first one the ordering is guaranteed):
entryfunc:
ldr x1,[x0]
and x1,x1,#8
orr x1,x1,#8
ldr x0,[x0,x1]
(3) load-acquire (ARMv8 instruction that is ordered before subsequent
loads and stores)
entryfunc:
ldar xzr,[x0]
ldr x0,[x0,#8]
Option (1) is the simplest but slowest (note: this runs at every TLS
access), options (2) and (3) do one extra load from [x0] (same address
loads are ordered so it happens-after the load on the call site),
option (2) clobbers x1 which is problematic because existing gcc does
not expect that, so approach (3) was chosen.
A new _dl_tlsdesc_return_lazy entry function was introduced for lazily
relocated static TLS, so non-lazy static TLS can avoid the synchronization
cost.
[BZ #18034]
* sysdeps/aarch64/dl-tlsdesc.h (_dl_tlsdesc_return_lazy): Declare.
* sysdeps/aarch64/dl-tlsdesc.S (_dl_tlsdesc_return_lazy): Define.
(_dl_tlsdesc_undefweak): Guarantee TLSDESC entry and argument load-load
ordering using ldar.
(_dl_tlsdesc_dynamic): Likewise.
(_dl_tlsdesc_return_lazy): Likewise.
* sysdeps/aarch64/tlsdesc.c (_dl_tlsdesc_resolve_rela_fixup): Use
relaxed atomics instead of volatile and synchronize with release store.
(_dl_tlsdesc_resolve_hold_fixup): Use relaxed atomics instead of
volatile.
* elf/tlsdeschtab.h (_dl_tlsdesc_resolve_early_return_p): Likewise.
syslog (XSI POSIX) brings in references to fputs_unlocked (not
POSIX). This patch fixes this by making fputs_unlocked into a weak
alias for __fputs_unlocked and using __fputs_unlocked as needed. (No
linknamespace test XFAILs are removed because there are other failures
from syslog as well.)
Tested for x86_64 and x86 (testsuite, and comparison of disassembly of
installed stripped shared libraries). Disassembly of installed
stripped shared libraries is unchanged on x86_64; on x86, I see some
small changes to instruction ordering and register choice, with no
apparent reason for such changes to be related to this patch, but they
also seem completely harmless with no change to code size.
[BZ #18530]
* libio/iofputs.c [!_IO_MTSAFE_IO] (__fputs_unlocked): Define as
strong alias of _IO_fputs. Use libc_hidden_def.
* libio/iofputs_u.c (fputs_unlocked): Rename to __fputs_unlocked
and define as weak alias of __fputs_unlocked. Use
libc_hidden_weak.
* include/stdio.h (__fputs_unlocked): Declare. Use
libc_hidden_proto.
* misc/syslog.c (__vsyslog_chk): Call __fputs_unlocked instead of
fputs_unlocked.
netdb.h declares interfaces such as getaddrinfo if __USE_POSIX,
i.e. POSIX.1:1990 or later. However, these interfaces were new in the
2001 edition of POSIX, although the header was in XPG4 and UNIX98, so
they should not be declared for XPG4 or UNIX98. (This produces
spurious linknamespace test failures, although there are other
failures for this header as well for the same standards so this patch
doesn't remove any XFAILs.) This patch corrects the condition, and
the conform/ test expectations which were similarly wrong.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
[BZ #18529]
* resolv/netdb.h [__USE_POSIX]: Change condition to
[__USE_XOPEN2K].
* conform/data/netdb.h-data [XPG4 || UNIX98] (struct addrinfo): Do
not expect.
[XPG4 || UNIX98] (AI_PASSIVE): Likewise.
[XPG4 || UNIX98] (AI_CANONNAME): Likewise.
[XPG4 || UNIX98] (AI_NUMERICHOST): Likewise.
[XPG4 || UNIX98] (AI_V4MAPPED): Likewise.
[XPG4 || UNIX98] (AI_ALL): Likewise.
[XPG4 || UNIX98] (AI_ADDRCONFIG): Likewise.
[XPG4 || UNIX98] (AI_NUMERICSERV): Likewise.
[XPG4 || UNIX98] (NI_NOFQDN): Likewise.
[XPG4 || UNIX98] (NI_NUMERICHOST): Likewise.
[XPG4 || UNIX98] (NI_NAMEREQD): Likewise.
[XPG4 || UNIX98] (NI_NUMERICSERV): Likewise.
[XPG4 || UNIX98] (NI_DGRAM): Likewise.
[XPG4 || UNIX98] (EAI_AGAIN): Likewise.
[XPG4 || UNIX98] (EAI_BADFLAGS): Likewise.
[XPG4 || UNIX98] (EAI_FAIL): Likewise.
[XPG4 || UNIX98] (EAI_FAMILY): Likewise.
[XPG4 || UNIX98] (EAI_MEMORY): Likewise.
[XPG4 || UNIX98] (EAI_NONAME): Likewise.
[XPG4 || UNIX98] (EAI_SERVICE): Likewise.
[XPG4 || UNIX98] (EAI_SOCKTYPE): Likewise.
[XPG4 || UNIX98] (EAI_SYSTEM): Likewise.
[XPG4 || UNIX98] (EAI_SYSTEM): Likewise.
[XPG4 || UNIX98] (freeaddrinfo): Likewise.
[XPG4 || UNIX98] (gai_strerror): Likewise.
[XPG4 || UNIX98] (getaddrinfo): Likewise.
[XPG4 || UNIX98] (getnameinfo): Likewise.
grp.h declares endgrent and getgrent if __USE_XOPEN2K8 (i.e. 2008
edition of POSIX, non-XSI). However, the 2013 Technical Corrigendum
corrected the grp.h specification to XSI-shade these functions as in
previous editions (see <http://austingroupbugs.net/view.php?id=24>),
so they should not be declared for non-XSI POSIX. This patch corrects
the conditions - using __USE_MISC || __USE_XOPEN_EXTENDED to match
setgrent - and the conform/ test expectations for this header, thereby
fixing the conform tests for this header for XPG3 (where the
expectations were wrong) and the linknamespace tests for it for
POSIX2008 (where the header bug meant it was wrongly considered a
problem for endgrent to bring in a reference to setgrent).
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
[BZ #18528]
* grp/grp.h (endgrent): Condition on [__USE_MISC ||
__USE_XOPEN_EXTENDED], not [__USE_XOPEN_EXTENDED ||
__USE_XOPEN2K8].
(getgrent): Likewise.
* conform/data/grp.h-data [XPG3 || POSIX2008] (getgrent): Do not
expect.
[XPG3 || POSIX2008] (endgrent): Likewise.
[XPG3] (setgrent): Likewise.
* conform/Makefile (test-xfail-XPG3/grp.h/conform): Remove
variable.
(test-xfail-POSIX2008/grp.h/linknamespace): Likewise.
Various functions in XPG4 bring in references to getlogin_r, which is
not in XPG4; this is also a bug for some older POSIX versions which
aren't yet covered by the linknamespace tests. This patch fixes this
by making getlogin_r into a weak alias for __getlogin_r and using
__getlogin_r as needed.
Tested for x86_64 and x86 (testsuite, and that disassembly of
installed stripped shared libraries is unchanged by the patch).
[BZ #18527]
* login/getlogin_r.c (getlogin_r): Rename to __getlogin_r and
define as weak alias of __getlogin_r. Use libc_hidden_weak.
* sysdeps/mach/hurd/getlogin_r.c (getlogin_r): Likewise.
* sysdeps/unix/getlogin_r.c (getlogin_r): Likewise.
* sysdeps/unix/sysv/linux/getlogin_r.c (getlogin_r): Likewise.
* include/unistd.h (__getlogin_r): Declare. Use
libc_hidden_proto.
* posix/glob.c (glob): Call __getlogin_r instead of getlogin_r.
* conform/Makefile (test-xfail-XPG3/glob.h/linknamespace): Remove
variable.
(test-xfail-XPG3/wordexp.h/linknamespace): Likewise.
(test-xfail-XPG4/glob.h/linknamespace): Likewise.
(test-xfail-XPG4/wordexp.h/linknamespace): Likewise.
a non-standard directory specified by the prefix make variable
fails with an error. Since this is an unsupported use case,
this change makes make install fail early and with a descriptive
error message when either the prefix or the exec_prefix make
variable is overridden on the command line.
aio_* bring in references to pread, which isn't in all the standards
containing aio_* (as a reference from one library to another, this is
a bug for dynamic as well as static linking). This patch fixes this
by using __libc_pread instead, exporting that function from libc at
symbol version GLIBC_PRIVATE; the code, with conditionals that may
call either __pread64 or __libc_pread, becomes exactly analogous to
that elsewhere in the same file that may call either __pwrite64 or
__libc_pwrite.
Tested for x86_64 and x86 (testsuite, and comparison of disassembly of
installed shared libraries). libc changes because of the PLT entry
for the newly exported __libc_pread; librt changes because of
assertion line numbers and PLT rearrangement; other stripped installed
shared libraries do not change.
[BZ #18519]
* posix/Versions (libc): Export __libc_pread at version
GLIBC_PRIVATE.
* sysdeps/pthread/aio_misc.c (handle_fildes_io): Call __libc_pread
instead of pread.
* conform/Makefile (test-xfail-POSIX/aio.h/linknamespace): Remove
variable.
The functions ecvt, fcvt and gcvt, in some standards, bring in
references to ecvt_r and fcvt_r, which aren't in any of those
standards. The calls are correctly to __ecvt_r and __fcvt_r, but then
the names ecvt_r and fcvt_r are defined as strong aliases; this patch
changes them to weak aliases.
Tested for x86_64 and x86 (testsuite, and that disassembly of
installed stripped shared libraries is unchanged by the patch).
[BZ #18522]
* misc/efgcvt_r.c
[LONG_DOUBLE_COMPAT (libc, GLIBC_2_0) && !LONG_DOUBLE_CVT]
(cvt_symbol): Use weak_alias instead of strong_alias.
[LONG_DOUBLE_COMPAT (libc, GLIBC_2_0)] (cvt_symbol): Likewise.
* conform/Makefile (test-xfail-XPG4/stdlib.h/linknamespace):
Remove variable.
(test-xfail-UNIX98/stdlib.h/linknamespace): Likewise.
(test-xfail-XOPEN2K/stdlib.h/linknamespace): Likewise.
The 2008 edition of POSIX removed h_errno, but some functions still
bring in references to the h_errno external symbol. As this symbol is
not a part of the public ABI (only __h_errno_location is), this patch
fixes this by renaming the GLIBC_PRIVATE TLS symbol to __h_errno.
Tested for x86_64 and x86 (testsuite, and comparison of installed
shared libraries). Disassembly of all shared libraries using h_errno
changes because of the renaming (and changes to associated TLS / GOT
offsets in some cases); disassembly of libpthread on x86_64 changes
more substantially because the enlargement of .dynsym affects
subsequent addresses.
[BZ #18520]
* inet/herrno.c (h_errno): Rename to __h_errno.
(__libc_h_errno): Define as alias of __h_errno not h_errno.
* include/netdb.h [IS_IN_LIB && !IS_IN (libc)] (h_errno): Define
to __h_errno instead of h_errno.
* nptl/herrno.c (h_errno): Rename to __h_errno.
(__h_errno_location): Refer to __h_errno not h_errno.
* resolv/Versions (h_errno): Rename to __h_errno.
* conform/Makefile (test-xfail-XOPEN2K8/grp.h/linknamespace):
Remove variable.
(test-xfail-XOPEN2K8/pwd.h/linknamespace): Likewise.
Here is implementation of vectorized sin containing SSE, AVX,
AVX2 and AVX512 versions according to Vector ABI
<https://groups.google.com/forum/#!topic/x86-64-abi/LmppCfN1rZ4>.
* bits/libm-simd-decl-stubs.h: Added stubs for sin.
* math/bits/mathcalls.h: Added sin declaration with __MATHCALL_VEC.
* sysdeps/unix/sysv/linux/x86_64/libmvec.abilist: New versions added.
* sysdeps/x86/fpu/bits/math-vector.h: SIMD declaration for sin.
* sysdeps/x86_64/fpu/Makefile (libmvec-support): Added new files.
* sysdeps/x86_64/fpu/Versions: New versions added.
* sysdeps/x86_64/fpu/libm-test-ulps: Regenerated.
* sysdeps/x86_64/fpu/multiarch/Makefile (libmvec-sysdep_routines): Added
build of SSE, AVX2 and AVX512 IFUNC versions.
* sysdeps/x86_64/fpu/multiarch/svml_d_sin2_core.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_d_sin2_core_sse4.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_d_sin4_core.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_d_sin4_core_avx2.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_d_sin8_core.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_d_sin8_core_avx512.S: New file.
* sysdeps/x86_64/fpu/svml_d_sin2_core.S: New file.
* sysdeps/x86_64/fpu/svml_d_sin4_core.S: New file.
* sysdeps/x86_64/fpu/svml_d_sin4_core_avx.S: New file.
* sysdeps/x86_64/fpu/svml_d_sin8_core.S: New file.
* sysdeps/x86_64/fpu/svml_d_sin_data.S: New file.
* sysdeps/x86_64/fpu/svml_d_sin_data.h: New file.
* sysdeps/x86_64/fpu/test-double-vlen2-wrappers.c: Added vector sin test.
* sysdeps/x86_64/fpu/test-double-vlen2.c: Likewise.
* sysdeps/x86_64/fpu/test-double-vlen4-avx2-wrappers.c: Likewise.
* sysdeps/x86_64/fpu/test-double-vlen4-avx2.c: Likewise.
* sysdeps/x86_64/fpu/test-double-vlen4-wrappers.c: Likewise.
* sysdeps/x86_64/fpu/test-double-vlen4.c: Likewise.
* sysdeps/x86_64/fpu/test-double-vlen8-wrappers.c: Likewise.
* sysdeps/x86_64/fpu/test-double-vlen8.c: Likewise.
* NEWS: Mention addition of x86_64 vector sin.
In commit 02657da2cf, .interp section
was removed from libpthread.so. This led to an error:
$ /lib64/libpthread.so.0
Native POSIX Threads Library by Ulrich Drepper et al
Copyright (C) 2015 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
Forced unwind support included.
Segmentation fault
(gdb) bt
#0 0x00000000000055a6 in _exit@plt ()
Unfortunately, there is no way to add a regression test for the bug
because .interp specifies the path to dynamic linker of the target
system.
[BZ #18479]
* nptl/pt-interp.c: New file.
* nptl/Makefile (libpthread-routines, libpthread-shared-only-routines):
Add pt-interp.
[$(build-shared) = yes] ($(objpfx)pt-interp.os): Depend on
$(common-objpfx)runtime-linker.h.
regcomp brings in references to wcscoll, which isn't in all the
standards that contain regcomp. In turn, wcscoll brings in references
to wcscmp, also not in all those standards. This patch fixes this by
making those functions into weak aliases of __wcscoll and __wcscmp and
calling those names instead as needed.
Tested for x86_64 and x86 (testsuite, and that disassembly of
installed shared libraries is unchanged by the patch).
[BZ #18497]
* wcsmbs/wcscmp.c [!WCSCMP] (WCSCMP): Define as __wcscmp instead
of wcscmp.
(wcscmp): Define as weak alias of WCSCMP.
* wcsmbs/wcscoll.c (STRCOLL): Define as __wcscoll instead of
wcscoll.
(USE_HIDDEN_DEF): Define.
[!USE_IN_EXTENDED_LOCALE_MODEL] (wcscoll): Define as weak alias of
__wcscoll. Don't use libc_hidden_weak.
* wcsmbs/wcscoll_l.c (STRCMP): Define as __wcscmp instead of
wcscmp.
* sysdeps/i386/i686/multiarch/wcscmp-c.c
[SHARED] (libc_hidden_def): Define __GI___wcscmp instead of
__GI_wcscmp.
(weak_alias): Undefine and redefine.
* sysdeps/i386/i686/multiarch/wcscmp.S (wcscmp): Rename to
__wcscmp and define as weak alias of __wcscmp.
* sysdeps/x86_64/wcscmp.S (wcscmp): Likewise.
* include/wchar.h (__wcscmp): Declare. Use libc_hidden_proto.
(__wcscoll): Likewise.
(wcscmp): Don't use libc_hidden_proto.
(wcscoll): Likewise.
* posix/regcomp.c (build_range_exp): Call __wcscoll instead of
wcscoll.
* posix/regexec.c (check_node_accept_bytes): Likewise.
* conform/Makefile (test-xfail-XPG3/regex.h/linknamespace): Remove
variable.
(test-xfail-XPG4/regex.h/linknamespace): Likewise.
(test-xfail-POSIX/regex.h/linknamespace): Likewise.
pathconf uses __statvfs64, and fpathconf uses __fstatvfs64. On
systems using sysdeps/unix/sysv/linux/wordsize-64, __statvfs64 then
brings in the strong symbol statvfs, and __fstatvfs64 brings in the
strong symbol fstatvfs, which are not in all the standards that have
pathconf and fpathconf. This patch fixes this by making those symbols
into weak aliases.
Tested for x86_64 and x86 (testsuite, and that disassembly of
installed shared libraries is unchanged by the patch).
[BZ #18507]
* sysdeps/unix/sysv/linux/fstatvfs.c (fstatvfs): Rename to
__fstatvfs and define as weak alias of __fstatvfs. Use
libc_hidden_weak.
* sysdeps/unix/sysv/linux/statvfs.c (statvs): Rename to __statvfs
and define as weak alias of __statvfs. Use libc_hidden_weak.
* sysdeps/unix/sysv/linux/wordsize-64/fstatvfs.c (__fstatvfs64):
Define as alias of __fstatvfs, not fstatvfs.
(fstatvfs64): Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/statvfs.c (__statvfs64):
Define as alias of __statvfs, not statvfs.
(statvfs64): Likewise.
* conform/Makefile (test-xfail-POSIX/unistd.h/linknamespace):
Remove variable.
Here is implementation of vectorized cosf containing SSE, AVX,
AVX2 and AVX512 versions according to Vector ABI
<https://groups.google.com/forum/#!topic/x86-64-abi/LmppCfN1rZ4>.
* sysdeps/x86_64/fpu/Makefile (libmvec-support): Added new files.
* sysdeps/x86_64/fpu/Versions: New versions added.
* sysdeps/x86_64/fpu/svml_s_cosf4_core.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_s_cosf4_core.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_s_cosf4_core_sse4.S: New file.
* sysdeps/x86_64/fpu/svml_s_cosf8_core_avx.S: New file.
* sysdeps/x86_64/fpu/svml_s_cosf8_core.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_s_cosf8_core.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_s_cosf8_core_avx2.S: New file.
* sysdeps/x86_64/fpu/svml_s_cosf16_core.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_s_cosf16_core.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_s_cosf16_core_avx512.S: New file.
* sysdeps/x86_64/fpu/svml_s_wrapper_impl.h: New file.
* sysdeps/x86_64/fpu/svml_s_cosf_data.S: New file.
* sysdeps/x86_64/fpu/svml_s_cosf_data.h: New file.
* sysdeps/x86_64/fpu/multiarch/Makefile (libmvec-sysdep_routines): Added
build of SSE, AVX2 and AVX512 IFUNC versions.
* sysdeps/unix/sysv/linux/x86_64/libmvec.abilist: New versions added.
* sysdeps/x86/fpu/bits/math-vector.h: Added SIMD declaration for cosf.
* NEWS: Mention addition of x86_64 vector cosf.
Here is implementation of cos containing SSE, AVX, AVX2 and AVX512
versions according to Vector ABI which had been discussed in
<https://groups.google.com/forum/#!topic/x86-64-abi/LmppCfN1rZ4>.
Vector math library build and ABI testing enabled by default for x86_64.
* sysdeps/x86_64/fpu/Makefile: New file.
* sysdeps/x86_64/fpu/Versions: New file.
* sysdeps/x86_64/fpu/svml_d_cos_data.S: New file.
* sysdeps/x86_64/fpu/svml_d_cos_data.h: New file.
* sysdeps/x86_64/fpu/svml_d_cos2_core.S: New file.
* sysdeps/x86_64/fpu/svml_d_cos4_core.S: New file.
* sysdeps/x86_64/fpu/svml_d_cos4_core_avx.S: New file.
* sysdeps/x86_64/fpu/svml_d_cos8_core.S: New file.
* sysdeps/x86_64/fpu/svml_d_wrapper_impl.h: New file.
* sysdeps/x86_64/fpu/multiarch/svml_d_cos2_core.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_d_cos2_core_sse4.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_d_cos4_core.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_d_cos4_core_avx2.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_d_cos8_core.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_d_cos8_core_avx512.S: New file.
* sysdeps/x86_64/fpu/multiarch/Makefile (libmvec-sysdep_routines): Added
build of SSE, AVX2 and AVX512 IFUNC versions.
* sysdeps/x86/fpu/bits/math-vector.h: Added SIMD declaration for cos.
* math/bits/mathcalls.h: Added cos declaration with __MATHCALL_VEC.
* sysdeps/x86_64/configure.ac: Options for libmvec build.
* sysdeps/x86_64/configure: Regenerated.
* sysdeps/x86_64/sysdep.h (cfi_offset_rel_rsp): New macro.
* sysdeps/unix/sysv/linux/x86_64/libmvec.abilist: New file.
* manual/install.texi (Configuring and compiling): Document
--disable-mathvec.
* INSTALL: Regenerated.
* NEWS: Mention addition of libmvec and x86_64 vector cos.
open_memstream is new in the 2008 edition of POSIX. However, the
older functions getopt, closelog and fmtmsg all bring in references to
it. This patch fixes this in the usual way, making open_memstream
into a weak alias of __open_memstream and calling __open_memstream
from the relevant places.
Tested for x86_64 and x86 (testsuite, and that disassembly of
installed shared libraries is unchanged by the patch). 32-bit builds
produce an XPASS for conform/POSIX/unistd.h/linknamespace after this
patch (because the only cause of failure left there now is 64-bit
specific); that will disappear once the 64-bit failure is resolved and
the XFAIL removed at that time.
[BZ #18498]
* libio/memstream.c (open_memstream): Rename to __open_memstream
and define as weak alias of __open_memstream.
* include/stdio.h (__open_memstream): Declare. Use
libc_hidden_proto.
(open_memstream): Don't use libc_hidden_proto.
* misc/syslog.c (__vsyslog_chk): Call __open_memstream instead of
open_memstream.
* posix/getopt.c (_getopt_internal_r): Likewise.
* conform/Makefile (test-xfail-XPG3/stdio.h/linknamespace): Remove
variable.
(test-xfail-XPG4/stdio.h/linknamespace): Likewise.
(test-xfail-UNIX98/stdio.h/linknamespace): Likewise.
(test-xfail-XOPEN2K/unistd.h/linknamespace): Likewise.
The regex code brings in references to wcrtomb, which isn't in all the
standards that contain regex. This patch makes it call __wcrtomb
instead (in fact some places already called __wcrtomb, so this patch
makes it internally consistent about which name is used).
Tested for x86_64 and x86 that installed stripped shared libraries are
unchanged by the patch.
[BZ #18496]
* posix/regex_internal.c (build_wcs_upper_buffer): Call __wcrtomb
instead of wcrtomb.
signal.h declares psignal and psiginfo if __USE_XOPEN2K - that is, for
the 2001 edition of POSIX. These functions were actually added in the
2008 edition (as indicated in the header comments). This patch fixes
the header conditionals. This fixes some linknamespace test failures
because psiginfo uses fmemopen, which is also new in the 2008 edition,
so before the header fix this appeared to the linknamespace tests as a
2001 function bringing in references to a 2008 function. The problem
also appeared in conformtest header namespace test results (the
conformtest data has correct conditionals for when these functions
should be visible), but the affected headers still have other
namespace problems so this doesn't fix any of those XFAILs.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
[BZ #18483]
* signal/signal.h [__USE_XOPEN2K] (psignal): Change condition to
[__USE_XOPEN2K8]. Remove redundant #endif.
[__USE_XOPEN2K] (psiginfo): Change condition to [__USE_XOPEN2K8].
Remove redundant #if.
* conform/Makefile (test-xfail-XOPEN2K/signal.h/linknamespace):
Remove variable.
(test-xfail-XOPEN2K/sys/wait.h/linknamespace): Likewise.
(test-xfail-XOPEN2K/ucontext.h/linknamespace): Likewise.
regcomp brings in references to various wctype functions that aren't
in all the standards including regcomp. This patch fixes this in the
usual way by using the __* versions of these functions (which already
exist, but some didn't have libc_hidden_proto / libc_hidden_def
before).
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch). (Other wide character
function references from the regex code mean that this patch by itself
doesn't fix any XFAILed linknamespace test failures; further patches
will be needed for that.)
[BZ #18495]
* wctype/wcfuncs.c (__iswalnum): Use libc_hidden_def.
(__iswlower): Likewise.
* include/wctype.h (__iswalnum): Declare. Use libc_hidden_proto.
(__iswlower): Likewise.
* posix/regcomp.c (re_compile_fastmap_iter): Call __towlower
instead of towlower.
* posix/regex_internal.c (build_wcs_upper_buffer): Call __iswlower
instead of iswlower. Call __towupper instead of towupper.
* posix/regex_internal.h (IS_WIDE_WORD_CHAR): Call __iswalnum
instead of iswalnum.
This adds wake-ups that would be missing if assuming that for a
non-writer-preferring rwlock, if one thread has acquired a rdlock and
does not release it, another thread will eventually acquire a rdlock too
despite concurrent write lock acquisition attempts. BZ 14958 is about
supporting this assumption. Strictly speaking, this isn't a valid
test case, but nonetheless worth supporting (see comment 7 of BZ 14958).
If we set up a rwlock to prefer writers (and disallow recursive rdlock
acquisitions), then readers will block for writers that are blocked to
acquire the lock (otherwise, readers could constantly enter and exit,
and the writer would never get the lock). However, the existing
implementation did not wake such readers when the writer timed out.
This patch adds the missing wake-up.
There's no similar case for writers being blocked on readers.
fnmatch brings in references to strnlen, which isn't in all the
standards that contain fnmatch (not added until the 2008 edition of
POSIX), resulting in linknamespace test failures. (This is contrary
to glibc conventions, rather than a standards conformance issue,
because of the str* reservation.) This patch fixes this in the usual
way, using __strnlen instead of strnlen.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
[BZ #18470]
* posix/fnmatch.c (fnmatch) [_LIBC]: Call __strnlen instead of
strnlen.
* conform/Makefile (test-xfail-XPG3/fnmatch.h/linknamespace):
Remove variable.
(test-xfail-XPG4/fnmatch.h/linknamespace): Likewise.
(test-xfail-POSIX/fnmatch.h/linknamespace): Likewise.
(test-xfail-POSIX/glob.h/linknamespace): Likewise.
(test-xfail-POSIX/wordexp.h/linknamespace): Likewise.
(test-xfail-UNIX98/fnmatch.h/linknamespace): Likewise.
(test-xfail-UNIX98/glob.h/linknamespace): Likewise.
(test-xfail-UNIX98/wordexp.h/linknamespace): Likewise.
(test-xfail-XOPEN2K/fnmatch.h/linknamespace): Likewise.
(test-xfail-XOPEN2K/glob.h/linknamespace): Likewise.
(test-xfail-XOPEN2K/wordexp.h/linknamespace): Likewise.
fnmatch brings in references to wmemchr, which isn't in all the
standards that contain fnmatch, resulting in linknamespace test
failures. This patch fixes this in the usual way, making wmemchr into
a weak alias for __wmemchr.
Tested for x86_64 and x86 (testsuite, and that disassembly of
installed shared libraries is unchanged by the patch).
[BZ #18468]
* wcsmbs/wmemchr.c (wmemchr): Rename to __wmemchr and define as
weak alias of __wmemchr. Use libc_hidden_weak.
* include/wchar.h (__wmemchr): Declare. Use libc_hidden_proto.
* posix/fnmatch.c [HANDLE_MULTIBYTE] (MEMCHR): Use __wmemchr
instead of wmemchr.
fnmatch brings in references to towlower (and thereby towupper), which
isn't in all the standards that contain fnmatch, resulting in
linknamespace test failures. (This is contrary to glibc conventions,
rather than a standards conformance issue, because of the to*
reservation.) This patch fixes this in the usual way, making those
functions into weak aliases.
Tested for x86_64 and x86 (testsuite, and that disassembly of
installed shared libraries is unchanged by the patch). This is on top
of <https://sourceware.org/ml/libc-alpha/2015-06/msg00019.html>, but
the two patches should be independent.
(The __attribute_pure__ on the declarations in include/wctype.h comes
from GCC's built-in attributes for towlower and towupper, and is
needed to get the same code generation for fnmatch before and after
the patch. It seems likely there are cases where the declaration of
__foo in the internal headers is missing attributes from foo in the
public headers, built-in to GCC or both, but I don't know a good way
to detect such missing attributes.)
[BZ #18469]
* wctype/wcfuncs.c (towlower): Rename to __towlower and define as
weak alias of __towlower. Use libc_hidden_weak.
(towupper): Rename to __towupper and define as weak alias of
__towupper. Use libc_hidden_weak.
* include/wctype.h (__towlower): Declare. Use libc_hidden_proto.
(__towupper): Likewise.
* posix/fnmatch.c [HANDLE_MULTIBYTE && _LIBC] (FOLD): Use
__towlower instead of towlower.
PLT relocations aren't required when -z now used. Linker on master with:
commit 25070364b0ce33eed46aa5d78ebebbec6accec7e
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Sat May 16 07:00:21 2015 -0700
Don't generate PLT relocations for now binding
There is no need for PLT relocations with -z now. We can use GOT
relocations, which take less space, instead and replace 16-byte .plt
entres with 8-byte .plt.got entries.
bfd/
* elf32-i386.c (elf_i386_check_relocs): Create .plt.got section
for now binding.
(elf_i386_allocate_dynrelocs): Use .plt.got section for now
binding.
* elf64-x86-64.c (elf_x86_64_check_relocs): Create .plt.got
section for now binding.
(elf_x86_64_allocate_dynrelocs): Use .plt.got section for now
binding.
won't generate PLT relocations with -z now. elf/tst-audit2.c expect
certain order of execution in ld.so. With PLT relocations, the GOTPLT
entry of calloc is update to calloc defined in tst-audit2:
(gdb) bt
skip_ifunc=<optimized out>, reloc_addr_arg=<optimized out>,
version=<optimized out>, sym=<optimized out>, map=<optimized out>)
at ../sysdeps/i386/dl-machine.h:329
out>,
nrelative=<optimized out>, relsize=<optimized out>,
reladdr=<optimized out>, map=<optimized out>) at do-rel.h:137
reloc_mode=reloc_mode@entry=0,
consider_profiling=1, consider_profiling@entry=0) at dl-reloc.c:258
user_entry=0xffffcf1c, auxv=0xffffd0a8) at rtld.c:2133
start_argptr=start_argptr@entry=0xffffcfb0,
dl_main=dl_main@entry=0xf7fda6f0 <dl_main>) at
../elf/dl-sysdep.c:249
from /export/build/gnu/glibc-32bit/build-i686-linux/elf/ld.so
(gdb)
and then calloc is called:
(gdb) c
Continuing.
Breakpoint 4, calloc (n=n@entry=20, m=4) at tst-audit2.c:18
18 {
(gdb) bt
reloc_mode=reloc_mode@entry=0, consider_profiling=1,
consider_profiling@entry=0) at dl-reloc.c:272
user_entry=0xffffcf1c, auxv=0xffffd0a8) at rtld.c:2133
start_argptr=start_argptr@entry=0xffffcfb0,
dl_main=dl_main@entry=0xf7fda6f0 <dl_main>) at
../elf/dl-sysdep.c:249
from /export/build/gnu/glibc-32bit/build-i686-linux/elf/ld.so
(gdb)
With GOT relocation, calloc in ld.so is called first:
(gdb) bt
consider_profiling=1) at dl-reloc.c:272
user_entry=0xffffcf0c, auxv=0xffffd098) at rtld.c:2074
start_argptr=start_argptr@entry=0xffffcfa0,
dl_main=dl_main@entry=0xf7fda6c0 <dl_main>) at
../elf/dl-sysdep.c:249
from /export/build/gnu/glibc-32bit-test/build-i686-linux/elf/ld.so
(gdb)
and then the GOT entry of calloc is updated:
(gdb) bt
skip_ifunc=<optimized out>, reloc_addr_arg=<optimized out>,
version=<optimized out>, sym=<optimized out>, map=<optimized out>)
at ../sysdeps/i386/dl-machine.h:329
out>,
nrelative=<optimized out>, relsize=<optimized out>,
reladdr=<optimized out>, map=<optimized out>) at do-rel.h:137
reloc_mode=reloc_mode@entry=0,
consider_profiling=1, consider_profiling@entry=0) at dl-reloc.c:258
user_entry=0xffffcf0c, auxv=0xffffd098) at rtld.c:2133
start_argptr=start_argptr@entry=0xffffcfa0,
dl_main=dl_main@entry=0xf7fda6c0 <dl_main>) at
../elf/dl-sysdep.c:249
from /export/build/gnu/glibc-32bit-test/build-i686-linux/elf/ld.so
(gdb)
After that, since calloc isn't called from ld.so nor any other modules,
magic in tst-audit2 isn't updated. Both orders are correct. This patch
makes sure that calloc in tst-audit2.c is called at least once from ld.so.
[BZ #18422]
* Makefile ($(objpfx)tst-audit2): Depend on $(libdl).
($(objpfx)tst-audit2.out): Also depend on
$(objpfx)tst-auditmod9b.so.
* elf/tst-audit2.c: Include <dlfcn.h>.
(calloc_called): New.
(calloc): Allow to be called more than once.
(do_test): dllopen/dlclose $ORIGIN/tst-auditmod9b.so.
In the introduction for the official orthography rules for Ukrainian
language (http://spelling.ulif.org.ua/peredmova.htm) there's a note
that only apostrophe does not affect order of the words when sorting.
As could be seen from the official alphabet the soft sign
(U+044C/U+042C) has its hard position and thus affects the order and
also letters "е" and "є" (CYR-IE: U+0435/U+0415 and UKR-IE:
U+0454/U+0404) have their own positions and should have separate place
when sorting.
This also corresponds to official Unicode collation chart for these
letters: http://unicode.org/charts/collation/chart_Cyrillic.html
On 21/05/15 05:29, Siddhesh Poyarekar wrote:
> On Wed, May 20, 2015 at 06:55:02PM +0100, Szabolcs Nagy wrote:
>> i guess it's ok for consistency if i fix struct stat64
>> too to use __USE_XOPEN2K8.
>>
>> i will run some tests and come back with a patch
>
> I also think it would be appropriate to change this code in other
> architectures (microblaze and nacl IIRC) to make all of them
> consistent. It is a mechanical enough change IMO that all arch
> maintainer acks is not necessary.
>
here is the patch with consistent __USE_XOPEN2K8
ok to commit?
2015-05-21 Szabolcs Nagy <szabolcs.nagy@arm.com>
[BZ #18234]
* conform/data/sys/stat.h-data (struct stat): Add tests for st_atim,
st_mtim and st_ctim members.
* sysdeps/nacl/bits/stat.h (struct stat, struct stat64): Make
st_atim, st_ctim, st_mtim visible under __USE_XOPEN2K8 only.
* sysdeps/unix/sysv/linux/generic/bits/stat.h (struct stat,):
(struct stat64): Likewise.
* sysdeps/unix/sysv/linux/ia64/bits/stat.h (struct stat,):
(struct stat64): Likewise.
* sysdeps/unix/sysv/linux/microblaze/bits/stat.h (struct stat,):
(struct stat64): Likewise.
