The merge of the latest gettext code introduced changes to the yacc
parser source that are incompatible with versions of bison older
than 2.7. Add a configure check for the appropriate versions and
document the requirement in INSTALL.
ChangeLog:
2014-12-22 Will Newton <will.newton@linaro.org>
* manual/install.texi: Document that we require bison 2.7
or above.
* INSTALL: Regenerate.
* configure.ac: Use AC_CHECK_PROG_VER instead of
AC_PATH_PROG when checking for bison and check for
version 2.7 or above.
* configure: Regenerate.
C99, C11, POSIX, and the glibc implementation do guarantee that the
pointers passed to the qsort comparison function lie within the array.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
It seems we require texinfo 4.7 for the --plaintext option, so
document that and check for the correct version in configure.
ChangeLog:
2014-12-15 Will Newton <will.newton@linaro.org>
* manual/install.texi: Bump required version of texinfo
to 4.7 from 4.5.
* INSTALL: Regenerated.
* configure.ac: Check for makeinfo version 4.7 and above.
* configure: Regenerated.
Under certain conditions on the size of the array and its items,
qsort() may fall back to an in-place quicksort if it cannot allocate
memory for a temporary array with malloc(). This algorithm is not a
stable sort even if the comparison function is written in the
described manner.
Fixes#10672.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
As discussed starting at
<https://sourceware.org/ml/libc-alpha/2014-11/msg00323.html>, this
patch makes the glibc build use -Werror by default to avoid
accidentally adding new warnings to the build. The configure option
--disable-werror can be used to disable this.
-Wno-error=undef is temporarily used because the build isn't clean
regarding -Wundef warnings. The idea is that once the remaining
-Wundef warnings have been cleaned up (in at least one configuration),
-Wno-error=undef will be removed.
I get a clean build and test on x86_64 (GCC 4.9 branch) with this
patch. The expectation is that this may well break the build for some
other configurations, and people seeing such breakage should make
appropriate fixes to fix or suppress the warnings for their
configurations. In some cases that may involve using pragmas as the
right fix (I think that will be right for the -Wno-inline issue for
MIPS I referred to in
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, for
example), in some cases -Wno-error in sysdeps makefiles (__restore_rt
in MIPS sigaction, for example), in some cases substantive fixes for
the warnings.
Note that if, with a view to listing all the warnings then fixing them
all, you just look for "warning:" in output from building and testing
with --disable-werror, you'll see lots of warnings from the linker
about functions such as tmpnam. Those warnings can be ignored - only
compiler warnings are relevant to -Werror, not linker warnings.
* configure.ac (--disable-werror): New configure option.
(enable_werror): New AC_SUBST.
* configure: Regenerated.
* config.make.in (enable-werror): New variable.
* Makeconfig [$(enable-werror) = yes] (+gccwarn): Add -Werror
-Wno-error=undef.
(+gccwarn-c): Do not use -Werror=implicit-function-declaration.
* manual/install.texi (Configuring and compiling): Document
--disable-werror.
* INSTALL: Regenerated.
* debug/Makefile (CFLAGS-tst-chk1.c): Add -Wno-error.
(CFLAGS-tst-chk2.c): Likewise.
(CFLAGS-tst-chk3.c): Likewise.
(CFLAGS-tst-chk4.cc): Likewise.
(CFLAGS-tst-chk5.cc): Likewise.
(CFLAGS-tst-chk6.cc): Likewise.
(CFLAGS-tst-lfschk1.c): Likewise.
(CFLAGS-tst-lfschk2.c): Likewise.
(CFLAGS-tst-lfschk3.c): Likewise.
(CFLAGS-tst-lfschk4.cc): Likewise.
(CFLAGS-tst-lfschk5.cc): Likewise.
(CFLAGS-tst-lfschk6.cc): Likewise.
for ChangeLog
* sysdeps/posix/ctermid.c (ctermid): Return a pointer to a
string literal if not passed a buffer.
* manual/job.texi (ctermid): Update reasoning, note deviation
from posix, suggest mtasurace when not passed a buffer, for
future non-preliminary safety notes.
for ChangeLog
* manual/Makefile ($(objpfx)stamp-summary): Require
check-safety.sh to pass.
* manual/check-safety.sh: Wish for verification that every
@deftypefn and @deftypefun is followed by a @safety remark.
2014-11-18 Tom de Vries <tom@codesoucery.com>
* manual/signal.texi (Primitives Interrupted by Signals): In section,
replace BSD Handler xref with BSD Signal Handling.
As discussed in the thread starting at
<https://sourceware.org/ml/libc-alpha/2014-10/msg00792.html>, and
continuing into November, this patch increases the minimum GCC version
for building glibc to 4.6 (there seemed to be no clear consensus for
4.7). In particular, this allows us to use #pragma GCC diagnostic for
fine-grained warning control with -Werror (subject to establishing a
suitable policy for that use). The documentation has a statement, as
requested, about the most recent GCC version tested for building
glibc, and I've updated <https://sourceware.org/glibc/wiki/Release> to
refer to updating that statement. A NEWS entry is added for this
change, although previous such changes didn't get them.
Tested for x86_64 (testsuite, and that installed shared libraries are
unchanged by this patch).
* configure.ac (libc_cv_compiler_ok): Require GCC 4.6 or later.
* configure: Regenerated.
* manual/install.texi (Tools for Compilation): Document a
requirement of GCC 4.6 or later and that GCC 4.9 is the newest
compiler verified to work.
* INSTALL: Regenerated.
We add Linux-realted comments about the atomicity of
write with respect to file offsets. As of Linux 3.14
the file offset update is atomic. That means that
multiple threads calling the write syscall can not possibly
get the same file offset. Therefore the writes should
not overlap and data should not be lost as is required
by POSIX.
I noticed that install.texi was out of date with regard to the actual
autoconf version requirement for regenerating configure scripts. This
patch updates the documentation.
* manual/install.texi (Tools for Compilation): Update autoconf
version requirements.
* INSTALL: Regenerated.
Add Linux-specific comments about the atomicity of write() and
the POSIX requirements.
2014-10-29 Carlos O'Donell <carlos@redhat.com>
* manual/llio.texi: Add comments discussing why write() may be
considered MT-unsafe on Linux.
Open file description locks have been merged into the Linux kernel for
v3.15. Add the appropriate command-value definitions and an update to
the manual that describes their usage.
This patch updates miscellaneous files from their upstream sources:
texinfo.tex from Texinfo, config.guess and config.sub from config.git,
install-sh from automake and move-if-change from gnulib.
Tested x86_64 that installed shared libraries are unchanged by the
patch; also looked at the generated libc.pdf manual.
* manual/texinfo.tex: Update to version 2014-05-05.10 with
trailing whitespace removed.
* scripts/config.guess: Update to version 2014-03-23.
* scripts/config.sub: Update to version 2014-05-01
* scripts/install-sh: Update to version 2013-12-25.23.
* scripts/move-if-change: Update from gnulib.
Various glibc build / install / test code has C locale settings that
are redundant with LC_ALL=C.
LC_ALL takes precedence over LANG, so anywhere that sets LC_ALL=C
(explicitly, or through it being in the default environment for
running tests) does not need to set LANG=C. LC_ALL=C also takes
precedence over LANGUAGE, since
2001-01-02 Ulrich Drepper <drepper@redhat.com>
* intl/dcigettext.c (guess_category_value): Rewrite so that LANGUAGE
value is ignored if the selected locale is the C locale.
* intl/tst-gettext.c: Set locale for above change.
* intl/tst-translit.c: Likewise.
and so settings of LANGUAGE=C are also redundant when LC_ALL=C is
set. One test also had LC_ALL=C in its -ENV setting, although it's
part of the default environment used for tests.
This patch removes the redundant settings. It removes a suggestion in
install.texi of setting LANGUAGE=C LC_ALL=C for "make install"; the
Makefile.in target "install" already sets LC_ALL_C so there's no need
for the user to set it (and nor should there be any need for the user
to set it).
If some build machine tool used by "make install" uses a version of
libintl predating that 2001 change, and the user has LANGUAGE set, the
removal of LANGUAGE=C from the Makefile.in "install" rule could in
principle affect the user's installation. However, I don't think we
need to be concerned about pre-2001 build tools.
Tested x86_64.
* Makefile (install): Don't set LANGUAGE.
* Makefile.in (install): Likewise.
* assert/Makefile (test-assert-ENV): Remove variable.
(test-assert-perr-ENV): Likewise.
* elf/Makefile (neededtest4-ENV): Likewise.
* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Don't set LANGUAGE.
* io/ftwtest-sh (LANG): Remove variable.
* libio/Makefile (tst-widetext-ENV): Likewise.
* manual/install.texi (Running make install): Don't refer to
environment settings for make install.
* INSTALL: Regenerated.
* nptl/tst-tls6.sh: Don't set LANG.
* posix/globtest.sh (LANG): Remove variable.
* string/Makefile (tester-ENV): Likewise.
(inl-tester-ENV): Likewise.
(noinl-tester-ENV): Likewise.
* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Don't set LANGUAGE.
* timezone/Makefile (build-testdata): Use $(built-program-cmd)
without explicit environment settings.
localedata/ChangeLog:
* tst-fmon.sh: Don't set LANGUAGE.
* tst-locale.sh: Likewise.
One wart in the original support for test wrappers for cross testing,
as noted in
<https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the
requirement for test wrappers to pass a poorly-defined set of
environment variables from the build system to the system running the
glibc under test. Although some variables are passed explicitly via
$(test-wrapper-env), including LD_* variables that simply can't be
passed implicitly because of the side effects they'd have on the build
system's dynamic linker, others are passed implicitly, including
variables such as GCONV_PATH and LOCPATH that could potentially affect
the build system's libc (so effectively relying on any such effects
not breaking the wrappers). In addition, the code in
cross-test-ssh.sh for preserving environment variables is fragile (it
depends on how bash formats a list of exported variables, and could
well break for multi-line variable definitions where the contents
contain things looking like other variable definitions).
This patch moves to explicitly passing environment variables via
$(test-wrapper-env). Makefile variables that previously used
$(test-wrapper) are split up into -before-env and -after-env parts
that can be passed separately to the various .sh files used in
testing, so those files can then insert environment settings between
the two parts.
The common default environment settings in make-test-out are made into
a separate makefile variable that can also be passed to scripts,
rather than many scripts duplicating those settings (for testing an
installed glibc, it is desirable to have the GCONV_PATH setting on
just one place, so just that one place needs to support it pointing to
an installed sysroot instead of the build tree). The default settings
are included in the variables such as $(test-program-prefix), so that
if tests do not need any non-default settings they can continue to use
single variables rather than the split-up variables.
Although this patch cleans up LC_ALL=C settings (that being part of
the common defaults), various LANG=C and LANGUAGE=C settings remain.
Those are generally unnecessary and I propose a subsequent cleanup to
remove them. LC_ALL takes precedence over LANG, and while LANGUAGE
takes precedence over LC_ALL, it only does so for settings other than
LC_ALL=C. So LC_ALL=C on its own is sufficient to ensure the C
locale, and anything that gets LC_ALL=C does not need the other
settings.
While preparing this patch I noticed some tests with .sh files that
appeared to do nothing beyond what the generic makefile support for
tests can do (localedata/tst-wctype.sh - the makefiles support -ENV
variables and .input files - and localedata/tst-mbswcs.sh - just runs
five tests that could be run individually from the makefile). So I
propose another subsequent cleanup to move those to using the generic
support instead of special .sh files.
Tested x86_64 (native) and powerpc32 (cross).
* Makeconfig (run-program-env): New variable.
(run-program-prefix-before-env): Likewise.
(run-program-prefix-after-env): Likewise.
(run-program-prefix): Define in terms of new variables.
(built-program-cmd-before-env): New variable.
(built-program-cmd-after-env): Likewise.
(built-program-cmd): Define in terms of new variables.
(test-program-prefix-before-env): New variable.
(test-program-prefix-after-env): Likewise.
(test-program-prefix): Define in terms of new variables.
(test-program-cmd-before-env): New variable.
(test-program-cmd-after-env): Likewise.
(test-program-cmd): Define in terms of new variables.
* Rules (make-test-out): Use $(run-program-env).
* scripts/cross-test-ssh.sh (env_blacklist): Remove variable.
(help): Do not mention environment variables. Mention
--timeoutfactor option.
(timeoutfactor): New variable.
(blacklist_exports): Remove function.
(exports): Remove variable.
(command): Do not include ${exports}.
* manual/install.texi (Configuring and compiling): Do not mention
test wrappers preserving environment variables. Mention that last
assignment to a variable must take precedence.
* INSTALL: Regenerated.
* benchtests/Makefile (run-bench): Use $(run-program-env).
* catgets/Makefile ($(objpfx)test1.cat): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)test2.cat): Do not specify environment variables
explicitly.
($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)sample.SJIS.cat): Do not specify environment variables
explicitly.
* catgets/test-gencat.sh: Use test_program_cmd_before_env,
run_program_env and test_program_cmd_after_env arguments.
* elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env).
* elf/tst-pathopt.sh: Use run_program_env argument.
* iconvdata/Makefile ($(objpfx)iconv-test.out): Use
$(test-wrapper-env) and $(run-program-env).
* iconvdata/run-iconv-test.sh: Use test_wrapper_env and
run_program_env arguments.
* iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly.
* intl/Makefile ($(objpfx)tst-gettext.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-gettext2.out): Likewise.
* intl/tst-gettext.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* intl/tst-gettext2.sh: Likewise.
* intl/tst-gettext4.sh: Do not set environment variables
explicitly.
* intl/tst-gettext6.sh: Likewise.
* intl/tst-translit.sh: Likewise.
* malloc/Makefile ($(objpfx)tst-mtrace.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* malloc/tst-mtrace.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* math/Makefile (run-regen-ulps): Use $(run-program-env).
* nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env).
* nptl/tst-tls6.sh: Use run_program_env argument. Set LANG=C
explicitly with each use of ${test_wrapper_env}.
* posix/Makefile ($(objpfx)wordexp-tst.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* posix/tst-getconf.sh: Do not set environment variables
explicitly.
* posix/wordexp-tst.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* stdio-common/tst-printf.sh: Do not set environment variables
explicitly.
* stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
Split $test calls into $test_pre and $test.
* timezone/Makefile (build-testdata): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
localedata/ChangeLog:
* Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)sort-test.out): Use $(test-program-prefix-before-env),
$(run-program-env) and $(test-program-prefix-after-env).
($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env),
$(run-program-env) and $(run-program-prefix-after-env).
($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env),
$(run-program-env), $(run-program-prefix-after-env),
$(test-program-prefix-before-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)tst-wctype.out): Likewise.
($(objpfx)tst-langinfo.out): Likewise.
($(objpfx)tst-langinfo-static.out): Likewise.
* gen-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* sort-test.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* tst-ctype.sh: Use tst_ctype_before_env, run_program_env and
tst_ctype_after_env arguments.
* tst-fmon.sh: Use run_program_prefix_before_env, run_program_env
and run_program_prefix_after_env arguments.
* tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env
and tst_langinfo_after_env arguments.
* tst-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* tst-mbswcs.sh: Do not set environment variables explicitly.
* tst-numeric.sh: Likewise.
* tst-rpmatch.sh: Likewise.
* tst-trans.sh: Use run_program_prefix_before_env,
run_program_env, run_program_prefix_after_env,
test_program_prefix_before_env and test_program_prefix_after_env
arguments.
* tst-wctype.sh: Use tst_wctype_before_env, run_program_env and
tst_wctype_after_env arguments.
The four functions {alpha,version}sort{,64} take parameters of type
const struct dirent{,64} **, not const void *.
Signed-off-by: Rasmus Villemoes <rv@rasmusvillemoes.dk>
This patch increases the minimum Linux kernel version for glibc to
2.6.32, as discussed in the thread starting at
<https://sourceware.org/ml/libc-alpha/2014-01/msg00511.html>.
This patch just does the minimal change to arch_minimum_kernel
settings (and LIBC_LINUX_VERSION, which determines the minimum kernel
headers version, as it doesn't make sense for that to be older than
the minimum kernel that can be used at runtime). Followups would be
expected to do, roughly and not necessarily precisely in this order:
* Remove __LINUX_KERNEL_VERSION checks in kernel-features.h files
where those checks are always true / always false for kernels 2.6.32
and above.
* Otherwise simplify/improve conditionals in those files (for example,
where defining once in the main file then undefining in
architecture-specific files makes things clearer than having lots of
separate definitions of the same macro), possibly fixing in the
process cases where a macro should optimally have been defined for a
given architecture but wasn't. (In the review in preparation for
this version increase I checked what the right conditions should be
for all macros in the main kernel-features.h whose definitions there
would have been affected by the increase - but I only fixed that
subset of the issues found where --enable-kernel=2.6.32 would have
caused a kernel feature to be wrongly assumed to be present, not any
cases where a feature is not assumed but could be assumed.)
* Remove conditionals on __ASSUME_* where they can now be taken to be
always-true, and the definitions when the macros are only used in
Linux-specific files.
* Split more architectures out of the main kernel-features.h (like
ex-ports architectures), once various of the architecture
conditionals there have been eliminated so the new
architecture-specific files are no larger than actually necessary.
Tested x86_64.
2014-03-27 Joseph Myers <joseph@codesourcery.com>
[BZ #9894]
* sysdeps/unix/sysv/linux/configure.ac (LIBC_LINUX_VERSION):
Change to 2.6.32.
(arch_minimum_kernel): Change all 2.6.16 settings to 2.6.32.
* sysdeps/unix/sysv/linux/configure: Regenerated.
* sysdeps/unix/sysv/linux/microblaze/configure.ac: Remove file.
* sysdeps/unix/sysv/linux/microblaze/configure: Likewise.
* sysdeps/unix/sysv/linux/tile/configure.ac: Likewise.
* sysdeps/unix/sysv/linux/tile/configure: Likewise.
* README: Update reference to required Linux kernel version.
* manual/install.texi (Linux): Update reference to required Linux
kernel headers version.
* INSTALL: Regenerated.
In the glibc manual we have a "Roadmap to the manual" section at
the end of the "Introduction" chapter.
The introductory text says "Here is an overview of the contents
of the remaining chapters of this manual.", but then proceeds to
list chapters out of order and some chapter are never referenced.
This commit reorders the overview to correctly match the manual
order.
See:
https://sourceware.org/ml/libc-alpha/2014-02/msg00823.html
Calling setcontext from a signal handler can be done safely so
it is sufficient to note that it is not recommended.
Also mention in setcontext documentation that the behaviour of
setcontext when restoring a context created by a call to a signal
handler is unspecified.
2014-04-17 Will Newton <will.newton@linaro.org>
* manual/setjmp.texi (System V contexts): Add note that
calling setcontext on a context created by a call to a
signal handler is undefined. Update text to note that
setcontext from a signal handler is possible but not
recommended.
If the user has requested automatic buffer creation, getline may create
it and not free things when an error occurs. That means the user is
always responsible for calling free() regardless of the return value.
The current documentation does not explicitly cover this which leaves it
slightly ambiguous to the reader. So clarify things.
URL: https://sourceware.org/bugzilla/show_bug.cgi?id=5666
This patch is an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00198.html> and
<https://sourceware.org/ml/libc-alpha/2014-03/msg00180.html>.
Normal practice for software testsuites is that rather than
terminating immediately when a test fails, they continue running and
report at the end on how many tests passed or failed.
The principle behind the glibc testsuite stopping on failure was
probably that the expected state is no failures and so any failure
indicates a problem such as miscompilation. In practice, while this
is fairly close to true for native testing on x86_64 and x86 (kernel
bugs and race conditions can still cause intermittent failures), it's
less likely to be the case on other platforms, and so people testing
glibc run the testsuite with "make -k" and then examine the logs to
determine whether the failures are what they expect to fail on that
platform, possibly with some automation for the comparison.
This patch switches the glibc testsuite to the normal convention of
not stopping on failure - unless you use stop-on-test-failure=y, in
which case it behaves essentially as it did before (and does not
generate overall test summaries on failure). Instead, the summary
tests.sum may contain tests that FAILed. At the end of the test run,
any FAIL or ERROR lines from tests.sum are printed, and then it exits
with error status if there were any such lines. In addition, build
failures will also cause the test run to stop - this has the
justification that those *do* indicate serious problems that should be
promptly fixed and aren't generally hard to fix (but apart from that,
avoiding the build stopping on those failures seems harder).
Note that unlike the previous patches in this series, this *does*
require people with automation around testing glibc to change their
processes - either to start using tests.sum / xtests.sum to track
failures and compare them with expectations (with or without also
using "make -k" and examining "make" logs to identify build failures),
or else to use stop-on-test-failure=y and ignore the new tests.sum /
xtests.sum mechanism. (If all you check is the exit status from "make
check", no changes are needed unless you want to avoid test runs
continuing after the first failure.)
Tested x86_64.
* scripts/evaluate-test.sh: Handle fourth argument to determine
whether test run should stop on failure.
* Makeconfig (stop-on-test-failure): New variable.
(evaluate-test): Pass fourth argument to evaluate-test.sh based on
$(stop-on-test-failure).
* Makefile (tests): Give a summary of results from testing and
exit with failure status if they include an ERROR or FAIL.
(xtests): Likewise.
* manual/install.texi (Configuring and compiling): Mention
stop-on-test-failure=y.
* INSTALL: Regenerated.
As recently discussed
<https://sourceware.org/ml/libc-alpha/2014-02/msg00670.html>, it
doesn't seem particularly useful for libm-test-ulps files to contain
huge amounts of data on ulps for individual tests; just the global
maximum observed ulps for each function, together with the
verification of exceptions, errno and special results such as
infinities and NaNs for each test, suffices to verify that a
function's behavior on the given test inputs is within the expected
accuracy. Removing this data reduces source tree churn caused by
updates to these files when libm tests are added, and reduces the
frequency with which testsuite additions actually need libm-test-ulps
changes at all.
Accordingly, this patch removes that data, so that individual tests
get checked against the global bounds for the given function and only
generate an error if those are exceeded. Tested x86_64 (including
verifying that if an ulps value is artificially reduced, the tests do
indeed fail as they should and "make regen-ulps" generates the
expected changes).
* math/libm-test.inc (struct ulp_data): Don't refer to ulps for
individual tests in comment.
(libm-test-ulps.h): Don't refer to test_ulps in #include comment.
(prev_max_error): New variable.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(compare_ulp_data): Don't refer to test names in comment.
(find_test_ulps): Remove function.
(find_function_ulps): Likewise.
(find_complex_function_ulps): Likewise.
(init_max_error): Take function name as argument. Look up ulps
for that function.
(print_ulps): Remove function.
(print_max_error): Use prev_max_error instead of calling
find_function_ulps.
(print_complex_max_error): Use prev_real_max_error and
prev_imag_max_error instead of calling find_complex_function_ulps.
(check_float_internal): Take max_ulp parameter instead of calling
find_test_ulps. Don't call print_ulps.
(check_float): Update call to check_float_internal.
(check_complex): Update calls to check_float_internal.
(START): Pass argument to init_max_error.
* math/gen-libm-test.pl (%results): Don't include "kind"
information.
(parse_ulps): Don't handle ulps of individual tests.
(print_ulps_file): Likewise.
(output_ulps): Likewise.
* math/README.libm-test: Update.
* manual/libm-err-tab.pl (parse_ulps): Don't handle ulps of
individual tests.
* sysdeps/aarch64/libm-test-ulps: Remove individual test ulps.
* sysdeps/alpha/fpu/libm-test-ulps: Likewise.
* sysdeps/arm/libm-test-ulps: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/ia64/fpu/libm-test-ulps: Likewise.
* sysdeps/m68k/coldfire/fpu/libm-test-ulps: Likewise.
* sysdeps/m68k/m680x0/fpu/libm-test-ulps: Likewise.
* sysdeps/microblaze/libm-test-ulps: Likewise.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
* sysdeps/s390/fpu/libm-test-ulps: Likewise.
* sysdeps/sh/libm-test-ulps: Likewise.
* sysdeps/sparc/fpu/libm-test-ulps: Likewise.
* sysdeps/tile/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* sysdeps/hppa/fpu/libm-test-ulps: Remove individual test ulps.
The glibc manual uses special annotations to include functions
in the summary chapter. These annotations were missing from the
functions in the threads chapter. This patch adds those special
markers and in turn adds these functions to the summary chapter.
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information. No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.
This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules). Includes are added if needed, or moved up if already
present. Subdirectory "all:" targets are removed, since Makeconfig
provides one.
There is potential for further cleanups I haven't done. Rules and
Makerules have code such as
ifneq "$(findstring env,$(origin headers))" ""
headers :=
endif
to override to empty any value of various variables that came from the
environment. I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable. (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.) Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves. The special code to override values coming
from the environment would then be obsolete and could be removed.
Tested x86_64, including that installed binaries are identical before
and after the patch.
* argp/Makefile: Include Makeconfig immediately after defining
subdir.
* assert/Makefile: Likewise.
* benchtests/Makefile: Likewise.
* catgets/Makefile: Likewise.
* conform/Makefile: Likewise.
* crypt/Makefile: Likewise.
* csu/Makefile: Likewise.
(all): Remove target.
* ctype/Makefile: Include Makeconfig immediately after defining
subdir.
* debug/Makefile: Likewise.
* dirent/Makefile: Likewise.
* dlfcn/Makefile: Likewise.
* gmon/Makefile: Likewise.
* gnulib/Makefile: Likewise.
* grp/Makefile: Likewise.
* gshadow/Makefile: Likewise.
* hesiod/Makefile: Likewise.
* hurd/Makefile: Likewise.
(all): Remove target.
* iconvdata/Makefile: Include Makeconfig immediately after
defining subdir.
* inet/Makefile: Likewise.
* intl/Makefile: Likewise.
* io/Makefile: Likewise.
* libio/Makefile: Likewise.
(all): Remove target.
* locale/Makefile: Include Makeconfig immediately after defining
subdir.
* login/Makefile: Likewise.
* mach/Makefile: Likewise.
(all): Remove target.
* malloc/Makefile: Include Makeconfig immediately after defining
subdir.
(all): Remove target.
* manual/Makefile: Include Makeconfig immediately after defining
subdir.
* math/Makefile: Likewise.
* misc/Makefile: Likewise.
* nis/Makefile: Likewise.
* nss/Makefile: Likewise.
* po/Makefile: Likewise.
(all): Remove target.
* posix/Makefile: Include Makeconfig immediately after defining
subdir.
* pwd/Makefile: Likewise.
* resolv/Makefile: Likewise.
* resource/Makefile: Likewise.
* rt/Makefile: Likewise.
* setjmp/Makefile: Likewise.
* shadow/Makefile: Likewise.
* signal/Makefile: Likewise.
* socket/Makefile: Likewise.
* soft-fp/Makefile: Likewise.
* stdio-common/Makefile: Likewise.
* stdlib/Makefile: Likewise.
* streams/Makefile: Likewise.
* string/Makefile: Likewise.
* sunrpc/Makefile: Likewise.
(all): Remove target.
* sysvipc/Makefile: Include Makeconfig immediately after defining
subdir.
* termios/Makefile: Likewise.
* time/Makefile: Likewise.
* timezone/Makefile: Likewise.
(all): Remove target.
* wcsmbs/Makefile: Include Makeconfig immediately after defining
subdir.
* wctype/Makefile: Likewise.
libidn/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
localedata/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
(all): Remove target.
nptl/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
nptl_db/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
This patch adds a new "Inter-Process Communication"
chapter to cover the sem*, msg*, and shm* functions.
Initially we document only the sem* function signatures
and their safety notes.
This is a minimal patch to remove _BSD_SOURCE and _SVID_SOURCE from
the documented user API, making them into aliases for _DEFAULT_SOURCE
with a #warning given, but keeping most of the features.h logic using
those macros and all the exising __USE_* conditionals, on the basis
that all the consequent cleanups will go in followup patches.
Tested x86_64.
* include/features.h: Update comment documenting feature test
macros.
[_BSD_SOURCE || _SVID_SOURCE]: Give #warning. Define
_DEFAULT_SOURCE.
* manual/creature.texi (_BSD_SOURCE): Remove documentation.
(_SVID_SOURCE): Likewise.
(_DEFAULT_SOURCE): Update description of default features.
(Feature Test Macros): Don't mention _SVID_SOURCE in conjunction
with _GNU_SOURCE.
* manual/filesys.texi (__ftw_func_t): Do not refer to _BSD_SOURCE.
(S_ISVTX): Likewise.
* manual/math.texi (Mathematical Constants): Likewise.
* manual/signal.texi (Interrupted Primitives): Likewise.
* manual/startup.texi (putenv): Do not refer to _SVID_SOURCE.
* math/test-matherr.c (_SVID_SOURCE): Do not define.
* sysvipc/sys/ipc.h [__USE_SVID && !__USE_XOPEN && __GNUC__ >= 2]:
Don't refer to _SVID_SOURCE in warning text.
Use the term "triggered" instead of "hit" when talking about probe
points.
ChangeLog:
2014-02-11 Will Newton <will.newton@linaro.org>
* manual/probes.texi (Mathematical Function Probes): Use
"triggered" instead of "hit".
Add some documentation of the setjmp, longjmp and longjmp_target
Systemtap probe points.
ChangeLog:
2014-02-11 Will Newton <will.newton@linaro.org>
* manual/probes.texi (Internal Probes): Add documentation
of setjmp, longjmp and longjmp_target probes.
The mixed use of automatic and manual node next, previous,
and top specification causes warning when building the manual.
This fix explicitly specifies the node's next, previous and top
values to fix the warning.
pthread_getspecific, pthread_setspecific): Format with
@deftypefun, and add @safety note.
* manual/signal.texi: Move comments that analyze the above
functions to their home place.
This patch updates various miscellaneous files we take from upstream
GNU sources (texinfo.texi, config.guess, config.sub - various others
haven't changed upstream since we last updated them) to their current
upstream versions.
Tested x86_64.
* manual/texinfo.tex: Update to version 2013-11-26.10 with
trailing whitespace removed.
* scripts/config.guess: Update to version 2013-11-29.
* scripts/config.sub: Update to version 2013-10-01.
This patch adds a feature test macro _DEFAULT_SOURCE to enable the
default set of header declarations.
The intention is: if _DEFAULT_SOURCE is not used there is no change to
the set of __USE_* macros glibc defines; if it's used on its own, and
without compiler options such as -std=c99 that define __STRICT_ANSI__,
again, there is no change; if it's used together with the macros it
approximately (i.e., apart from __USE_POSIX_IMPLICITLY) implies
(-D_BSD_SOURCE -D_SVID_SOURCE -D_POSIX_C_SOURCE=200809L), again, there
is no change. Otherwise, it causes the relevant features to be
enabled, even if __STRICT_ANSI__, or another feature test macro, would
cause them to be disabled.
This macro deliberately bundles the POSIX.1-2008 (non-X/Open)
functionality with the BSD/SVID/"misc" functionality, rather than
defining a macro that gives just the latter, as many of the header
cleanups resulting from removing _BSD_SOURCE and _SVID_SOURCE support
are only possible when BSD/SVID/"misc" is always bundled with
POSIX.1-2008.
Tested x86_64.
* include/features.h: Update comment documenting feature test
macros. Mention _DEFAULT_SOURCE in comment.
[_GNU_SOURCE] (_DEFAULT_SOURCE): Undefine and redefine.
[_DEFAULT_SOURCE]: Undefine and redefine _DEFAULT_SOURCE,
_BSD_SOURCE and _SVID_SOURCE.
[!__STRICT_ANSI__ && !_ISOC99_SOURCE && !_POSIX_SOURCE &&
!_POSIX_C_SOURCE && !_XOPEN_SOURCE && !_BSD_SOURCE &&
!_SVID_SOURCE]: Likewise.
[_DEFAULT_SOURCE && !_POSIX_SOURCE && !_POSIX_C_SOURCE]
(__USE_POSIX_IMPLICITLY): Define.
[_DEFAULT_SOURCE && !_POSIX_SOURCE && !_POSIX_C_SOURCE]
(_POSIX_SOURCE): Undefine and redefine.
[_DEFAULT_SOURCE && !_POSIX_SOURCE && !_POSIX_C_SOURCE]
(_POSIX_C_SOURCE): Likewise.
* manual/creature.texi (_DEFAULT_SOURCE): Document.
(Feature Test Macros): Update documentation of default features.
The commit d136c6dc resulted in menu text for the "Top" node being added
to the INSTALL file on regeneration. As the full menu is not displayed
in the plain text file anyway, suppress the menu section completely to
avoid the additional text.
Also regenerate the INSTALL file to commit a small formatting change
introduced in the same commit.
[BZ 15846] As discussed in the recent thread on my $EXEC_ORIGIN patch
and in BZ 15846, getauxval() presently has no unambiguous way of
reporting an error condition. It currently returns zero on error, but
this may also be a valid result for some auxv entries. As there is no
clear invalid result for all current and future auxv entries, this patch
sets errno (following a suggestion in the BZ entry).
This version of the patch also adds documentation and tests for the
value-not-found conditions in getauxval().
This is needed for version-3 tz-format files; it supports time
stamps past 2037 for America/Godthab (the only entry in the tz
database for which this change is relevant).
* manual/time.texi (TZ Variable): Document transition times
from -167:59:59 through -00:00:01.
* time/tzset.c (tz_rule): Time of day is now signed.
(__tzset_parse_tz): Parse negative time of day.
* manual/time.texi (TZ Variable): Document transition times from
25:00:00 through 167:59:59. These are already supported, and this
support will help with version-3 tz-format files.
ChangeLog:
2013-12-16 Will Newton <will.newton@linaro.org>
* manual/memory.texi (Malloc Examples): Mention aligned_alloc.
(Aligned Memory Blocks): Add documentation for aligned_alloc
and suggest it as an alternative to posix_memalign.
(Hooks for Malloc): Document __memalign_hook is also called
for aligned_alloc. (Summary of Malloc): Add summary for
aligned alloc. Document __memalign_hook is also called
for aligned_alloc.
The current documentation suggests using memalign and valloc which
are now considered obsolete, so suggest using posix_memalign instead.
Also document the possible error return and errno values for memalign
and posix_memalign and improve documentation of __memalign_hook.
ChangeLog:
2013-12-16 Will Newton <will.newton@linaro.org>
* manual/memory.texi (Malloc Examples): Clarify default
alignment documentation. Suggest posix_memalign rather
than memalign or valloc.
(Aligned Memory Blocks): Remove suggestion to use memalign
or valloc. Remove obsolete comment about BSD.
Document memalign errno values and mark the function obsolete.
Document posix_memalign returned error codes. Mark valloc
as obsolete. (Hooks for Malloc): __memalign_hook is also
called for posix_memalign and valloc.
(Summary of Malloc): Add posix_memalign to function summary.
__memalign_hook is also called for posix_memalign and valloc.
The register keyword doesn't add any information to the examples
and is not useful for modern compilers.
ChangeLog:
2013-11-06 Will Newton <will.newton@linaro.org>
* manual/memory.texi (Malloc Examples): Remove register
keyword from examples.
Autoconf has been deprecating configure.in for quite a long time.
Rename all our configure.in and preconfigure.in files to .ac.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The Secure RPC implementation in glibc uses DES encryption
during authentication of the user. This use of DES means
that anyone using Sun RPC will likely not be compliant
with FIPS 140-2 which forbids the use of DES.
One solution to the compliance issue is to disable AUTH_DES
and AUTH_KERB, both use DES, when in FIPS compliance mode.
This is not a good idea because it disables all of the even
mildly secure methods of authentication allowing only plain
text methods.
Instead we leave AUTH_DES and AUTH_KERB enabled in FIPS
compliance mode and document the compliance issue in the
manual. FIPS allows this, that is to say that if you can't
fix it you must document the non-compliance.
This commit adds documentation to that effect in the
"DES encryption and password handling" section of the
manual.
Add systemtap probes to various slow paths in libm so that application
developers may use systemtap to find out if their applications are
hitting these slow paths. We have added probes for pow, exp, log,
tan, atan and atan2.
for ChangeLog
* malloc/arena.c (new_heap): New memory_heap_new probe.
(grow_heap): New memory_heap_more probe.
(shrink_heap): New memory_heap_less probe.
(heap_trim): New memory_heap_free probe.
* malloc/malloc.c (sysmalloc): New memory_sbrk_more probe.
(systrim): New memory_sbrk_less probe.
* manual/probes.texi: Document them.
The end of the "Parsing of Floats" subsection currently reads:
The GNU C Library also provides '_l' versions of these functions,
which take an additional argument, the locale to use in conversion.
*Note Parsing of Integers::.
Split the final note as it is unrelated to the above comment and
reference it with "See also" instead.
The pt-chown binary is discussed in the "Running make install" section
without clarification of the needed configure option. Clarify this
and simplfy the discription which is already covered in the "Configuring
and compiling" section.
The helper binary pt_chown tricked into granting access to another
user's pseudo-terminal.
Pre-conditions for the attack:
* Attacker with local user account
* Kernel with FUSE support
* "user_allow_other" in /etc/fuse.conf
* Victim with allocated slave in /dev/pts
Using the setuid installed pt_chown and a weak check on whether a file
descriptor is a tty, an attacker could fake a pty check using FUSE and
trick pt_chown to grant ownership of a pty descriptor that the current
user does not own. It cannot access /dev/pts/ptmx however.
In most modern distributions pt_chown is not needed because devpts
is enabled by default. The fix for this CVE is to disable building
and using pt_chown by default. We still provide a configure option
to enable hte use of pt_chown but distributions do so at their own
risk.
It is the magnitude of the return value which lies
in [0.5, 1), not the return value itself.
---
2013-05-28 Ben North <ben@redfrontdoor.org>
* manual/arith.texi (frexp): It is the magnitude of the return
value which lies in [0.5, 1), not the return value itself.
Rewrite the first paragraph to talk about users not humans,
and to use correct English.
Clarify that it is the mapping of messages to IDs that
impacts the design of the message translation API.
---
2013-05-07 Carlos O'Donell <carlos@redhat.com>
* manual/message.texi (Message Translation): Talk about users.
Message to key mapping impacts design.
This adds the base chapter for POSIX threads and also documentation
for thread-specific data, along with a note on its interaction with
C++11 thread_local variables.
Surround the "Detailed Node Listing" section of the info page menu with
@detailmenu flags to avoid confusing texinfo. Resolves a large number
of warnings printed by texinfo-5.0.
The glob flags page reads as if this section is comprehensive when it
is not -- a lot of GNU extensions exist. Point that out in the intro.
Reviewed-by: Carlos O'Donell <carlos@systemhalted.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The More Flags for Globbing section indirectly mentions gl_flags when
talking about GLOB_MAGCHAR. Mention it explicitly when covering the
glob_t types.
Reviewed-by: Carlos O'Donell <carlos@systemhalted.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Putting @cartouche inside of @smallexample does not work with HTML output
as the former produces a <table> while the latter produces a <pre>. You
cannot nest a <table> in a <pre> as the contents are no longer formatted.
Since it's entirely unnecessary, and none of the other examples do this,
just drop the cartouche.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
