The current code for handling concurrent resolution says that the
ABI for _dl_tlsdesc_resolve_hold is the same as that of
_dl_tlsdesc_lazy_resolver. However _dl_tlsdesc_resolve_hold is
called from the trampoline directly rather than the lazy resolver
stub so, for example, r2 has not been pushed so does not needed
to be restored.
This fixes an intermittent failure in nptl/tst-tls3 when building
glibc for arm-linux-gnueabihf with -mtls-dialect=gnu2.
ChangeLog:
2014-05-27 Will Newton <will.newton@linaro.org>
[BZ #16990]
* sysdeps/arm/dl-tlsdesc.S (_dl_tlsdesc_resolve_hold): Save
and restore r2 rather than just restoring.
The offset computation in write mode uses the fact that _IO_read_end
is kept in sync with the external file offset. This however is not
true when O_APPEND is in effect since switching to write mode ought to
send the external file offset to the end of file without making the
necessary adjustment to _IO_read_end.
Hence in append mode, offset computation when writing should only
consider the effect of unflushed writes, i.e. from _IO_write_base to
_IO_write_ptr.
The wiki has a detailed document that describes the rationale for
offsets returned by ftell in various conditions:
https://sourceware.org/glibc/wiki/File%20offsets%20in%20a%20stdio%20stream%20and%20ftell
The nested function mi_arena was removed from malloc_info
and made into a non-nested static inline function of the same
name with the correct set of arguments passed from malloc_info.
This enables building glibc with compilers that don't support
nested functions. Future work on malloc_info should remove these
functions entirely to support JSON format output. Therefore we
do the minimum required to remove the nested function.
Add a new 'init' directive that specifies the name of the function to
call to do function-specific initialization. This is useful for
benchmarks that need to do a one-time initialization before the
functions are executed.
This fixes a variety of testsuite failures for me:
tststatic.out Error 1
tststatic2.out Error 1
tst-tls9-static.out Error 1
tst-audit8.out Error 127
tst-audit9.out Error 127
tst-audit1.out Error 127
and also has the added benefit of making LD_AUDIT/sotruss work on
AArch64.
Otherwise, we bail out early in _dl_try_allocate_static_tls as the
alignment requirement of the PT_TLS section in libc is 16.
The netgroups nss modules in the glibc tree use NSS_STATUS_UNAVAIL
(with errno as ERANGE) when the supplied buffer does not have
sufficient space for the result. This is wrong, because the canonical
way to indicate insufficient buffer is to set the errno to ERANGE and
the status to NSS_STATUS_TRYAGAIN, as is used by all other modules.
This fixes nscd behaviour when the nss_ldap module returns
NSS_STATUS_TRYAGAIN to indicate that a netgroup entry is too long to
fit into the supplied buffer.
This macro was removed by
2005-11-16 Daniel Jacobowitz <dan@codesourcery.com>
but not applied to the (still separate) eabi port so necro'd
when the eabi port superceded the old abi. It was thence
copied into the new AArch64 port.
As noted in bug 16978, older POSIX versions include
in the specified contents of <tar.h>, with only the 2001 edition
introducing the notion of XSI-conditional definitions and conditioning
that definition. Thus, this macro should be defined for
!__USE_XOPEN2K as well as for __USE_XOPEN, and this patch duly defines
it in that case. Tested x86_64.
[BZ #16978]
* posix/tar.h [!__USE_XOPEN2K] (TSVTX): Define macro.
* conform/Makefile (test-xfail-POSIX/tar.h/conform): Remove
variable.
As with various other issues of this kind, bug 16977 is log10 (1)
wrongly returning -0 rather than +0 in round-downward mode because of
an implementation effectively in terms of log1p (x - 1). This patch
fixes the issue in the same way used for log.
Tested x86_64 and x86 and ulps updated accordingly. Also tested for
mips64 to confirm a fix was needed for ldbl-128 and to validate that
fix (also applied to ldbl-128ibm since that version of logl is
essentially the same as the ldbl-128 one).
[BZ #16977]
* sysdeps/i386/fpu/e_log10.S (__ieee754_log10): Take absolute
value when x - 1 is zero.
* sysdeps/i386/fpu/e_log10f.S (__ieee754_log10f): Likewise.
* sysdeps/i386/fpu/e_log10l.S (__ieee754_log10l): Likewise.
* sysdeps/ieee754/ldbl-128/e_log10l.c (__ieee754_log10l): Return
0.0L for an argument of 1.0L.
* sysdeps/ieee754/ldbl-128ibm/e_log10l.c (__ieee754_log10l):
Likewise.
* sysdeps/x86_64/fpu/e_log10l.S (__ieee754_log10l): Take absolute
value when x - 1 is zero.
* math/libm-test.inc (log10_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
The four functions {alpha,version}sort{,64} take parameters of type
const struct dirent{,64} **, not const void *.
Signed-off-by: Rasmus Villemoes <rv@rasmusvillemoes.dk>
This patch is the first in the series of patches that remove nested
functions from glibc.
Rationale: nested functions is a non-standard language feature;
removing nested functions
will allow to compile glibc with compilers other than GCC and thus
benefit from other compilers
and code analysis tools.
This patch fixes a similar issue to
736c304a1a, where for PPC32 if the symbol
is defined as hidden (memchr) then compiler will create a local branc
(symbol@local) and the linker will not create a required PLT call to
make the ifunc work. It changes the default hidden symbol (__GI_memchr)
to default memchr symbol for powerpc32 (__memchr_ppc32).
I noticed that some of the Depend files, used to determine the
subdirectory build order in sysd-sorted, still mentioned linuxthreads,
although it hasn't been supported for many years. This patch removes
those references. In the case of nscd, it substitutes an nptl
reference, since I believe there is a fact a thread library dependence
there; the others already mentioned nptl.
Note that I am not at all confident in the completeness of these
Depend files.
Note also that references to linuxthreads remain in a comment in
sysdeps/unix/sysv/linux/ia64/Versions, and in manual/maint.texi,
manual/signal.texi and scripts/documented.sh.
Tested x86_64 that the installed shared libraries are unchanged by the
patch (as is sysd-sorted).
* nscd/Depend (linuxthreads): Remove.
(nptl): Add.
* resolv/Depend (linuxthreads): Remove.
* rt/Depend (linuxthreads): Remove.
As previously noted
<https://sourceware.org/ml/libc-alpha/2013-05/msg00696.html>,
$(elf-objpfx) and $(elfobjdir) are redundant and should be
consolidated. This patch consolidates on $(elf-objpfx) (for
consistency with $(csu-objpfx)), also changing direct uses of
$(common-objpfx)elf/ to use $(elf-objpfx).
Tested x86_64, including that installed shared libraries are unchanged
by the patch.
* Makeconfig [$(build-hardcoded-path-in-tests) = yes]
(rtld-tests-LDFLAGS): Use $(elf-objpfx) instead of
$(common-objpfx)elf/.
(link-libc-before-gnulib): Likewise.
(elfobjdir): Remove variable.
* Makefile (install): Use $(elf-objpfx) instead of
$(common-objpfx)elf/.
* Makerules (link-libc-args): Use $(elf-objpfx) instead of
$(elfobjdir)/.
(link-libc-deps): Likewise.
($(common-objpfx)libc.so): Likewise.
($(common-objpfx)linkobj/libc.so): Likewise.
[$(cross-compiling) = no] (symbolic-link-prog): Use $(elf-objpfx)
instead of $(common-objpfx)elf/.
(symbolic-link-list): Likewise.
* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Likewise.
* sysdeps/arm/Makefile (gnulib-arch): Use $(elf-objpfx) instead of
$(elfobjdir)/.
(static-gnulib-arch): Likewise.
* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Use $(elf-objpfx) instead of
$(common-objpfx)elf/.
localedata/ChangeLog:
* Makefile (LOCALEDEF): Use $(elf-objpfx) instead of
$(common-objpfx)elf/.
This also highlights that we'd been loading 64-bits instead of
the proper 32-bits. Caught by the linker as a relocation error,
since the variable happened to be unaligned for 64-bits.
