* Update ULP comment reflecting a new observed max in [-pi/2, pi/2]
* Use the same polynomial in AdvSIMD and SVE, rather than FTRIG instructions
* Improve register use near special-case branch
Also use overloaded intrinsics for SVE.
When -D_FORTIFY_SOURCE=2 was given during compilation,
sprintf and similar functions will check if their
first argument is in read-only memory and exit with
*** %n in writable segment detected ***
otherwise. To check if the memory is read-only, glibc
reads frpm the file "/proc/self/maps". If opening this
file fails due to too many open files (EMFILE), glibc
will now ignore this error.
Fixes [BZ #30932]
Signed-off-by: Volker Weißmann <volker.weissmann@gmx.de>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
GLIBC_TUNABLES scrubbing happens earlier than envvar scrubbing and some
tunables are required to propagate past setxid boundary, like their
env_alias. Rely on tunable scrubbing to clean out GLIBC_TUNABLES like
before, restoring behaviour in glibc 2.37 and earlier.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Linux v5.10 added a mount option MS_NOSYMFOLLOW, which was added to
glibc in commit 0ca21427d9.
Add the corresponding statfs/statvfs flag bit, ST_NOSYMFOLLOW.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Read directly into the mips_abiflags struct rather than reading the
entire segment and using alloca when the passed buffer is not big enough.
Checked with build-many-glibcs.py on mips-linux-gnu
Tested-by: Ying Huang <ying.huang@oss.cipunited.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This commit add support for the new AVX10 cpu features:
https://cdrdv2-public.intel.com/784267/355989-intel-avx10-spec.pdf
We add checks for:
- `AVX10`: Check if AVX10 is present.
- `AVX10_{X,Y,Z}MM`: Check if a given vec class has AVX10 support.
`make check` passes and cpuid output was checked against GNR/DMR on an
emulator.
On powerpc, SET_RESTORE_ROUND uses inline assembly to optimize the
prologue get/save/set rounding mode operations for POWER9 and
later by using 'mffscrn' where possible, this was introduced by
commit f1c56cdff0.
GCC version 14 onwards supports builtins as __builtin_set_fpscr_rn
which now returns the FPSCR fields in a double. This feature is
available on Power9 when the __SET_FPSCR_RN_RETURNS_FPSCR__ macro
is defined.
GCC commit ef3bbc69d15707e4db6e2f198c621effb636cc26 adds
this feature.
Changes are done to use __builtin_set_fpscr_rn instead of mffscrn
or mffscrni in __fe_mffscrn(rn).
Suggested-by: Carl Love <cel@us.ibm.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
AT_EMPTY_PATH is a requirement to implement fstat over fstatat,
however it does not prevent the kernel to read the path argument.
It is not an issue, but on x86-64 with SMAP-capable CPUs the kernel is
forced to perform expensive user memory access. After that regular
lookup is performed which adds even more overhead.
Instead, issue the fstat syscall directly on LFS fstat implementation
(32 bit architectures will still continue to use statx, which is
required to have 64 bit time_t support). it should be even a
small performance gain on non x86_64, since there is no need
to handle the path argument.
Checked on x86_64-linux-gnu.
Remove the unnecessary extra checks for sin (-0.0) from vector sin/sinf,
improving performance. Passes regress.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
This patch updates the kernel version in the tests tst-mman-consts.py
and tst-pidfd-consts.py to 6.5. (There are no new constants covered
by these tests in 6.5 that need any other header changes;
tst-mount-consts.py was updated separately along with a header
constant addition.)
Tested with build-many-glibcs.py.
When an NSS plugin only implements the _gethostbyname2_r and
_getcanonname_r callbacks, getaddrinfo could use memory that was freed
during tmpbuf resizing, through h_name in a previous query response.
The backing store for res->at->name when doing a query with
gethostbyname3_r or gethostbyname2_r is tmpbuf, which is reallocated in
gethosts during the query. For AF_INET6 lookup with AI_ALL |
AI_V4MAPPED, gethosts gets called twice, once for a v6 lookup and second
for a v4 lookup. In this case, if the first call reallocates tmpbuf
enough number of times, resulting in a malloc, th->h_name (that
res->at->name refers to) ends up on a heap allocated storage in tmpbuf.
Now if the second call to gethosts also causes the plugin callback to
return NSS_STATUS_TRYAGAIN, tmpbuf will get freed, resulting in a UAF
reference in res->at->name. This then gets dereferenced in the
getcanonname_r plugin call, resulting in the use after free.
Fix this by copying h_name over and freeing it at the end. This
resolves BZ #30843, which is assigned CVE-2023-4806.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
According to glibc strrchr microbenchmark test results, this implementation
could reduce the runtime time as following:
Name Percent of rutime reduced
strrchr-lasx 10%-50%
strrchr-lsx 0%-50%
strrchr-aligned 5%-50%
Generic strrchr is implemented by function strlen + memrchr, the lasx version
will compare with generic strrchr implemented by strlen-lasx + memrchr-lasx,
the lsx version will compare with generic strrchr implemented by strlen-lsx +
memrchr-lsx, the aligned version will compare with generic strrchr implemented
by strlen-aligned + memrchr-generic.
According to glibc strcpy and stpcpy microbenchmark test results(changed
to use generic_strcpy and generic_stpcpy instead of strlen + memcpy),
comparing with the generic version, this implementation could reduce the
runtime as following:
Name Percent of rutime reduced
strcpy-aligned 8%-45%
strcpy-unaligned 8%-48%, comparing with the aligned version, unaligned
version takes less instructions to copy the tail of data
which length is less than 8. it also has better performance
in case src and dest cannot be both aligned with 8bytes
strcpy-lsx 20%-80%
strcpy-lasx 15%-86%
stpcpy-aligned 6%-43%
stpcpy-unaligned 8%-48%
stpcpy-lsx 10%-80%
stpcpy-lasx 10%-87%
This patch adds the MOVE_MOUNT_BENEATH constant from Linux 6.5 to
glibc's sys/mount.h and updates tst-mount-consts.py to reflect these
constants being up to date with that Linux kernel version.
Tested with build-many-glibcs.py.
Linux 6.5 has one new syscall, cachestat, and also enables the
cacheflush syscall for hppa. Update syscall-names.list and regenerate
the arch-syscall.h headers with build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
Needed since gcc-10 enabled -fno-common by default.
[In use in Gentoo since gcc-10, no problems observed.
Also discussed with and reviewed by Jessica Clarke from
Debian. Andreas]
Bug: https://bugs.gentoo.org/723268
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Signed-off-by: Sergei Trofimovich <slyich@gmail.com>
Signed-off-by: Andreas K. Hüttel <dilfridge@gentoo.org>
Use a fixed size array instead. The maximum number of arguments
is set by macro tricks.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The current implementation of dlclose (and process exit) re-sorts the
link maps before calling ELF destructors. Destructor order is not the
reverse of the constructor order as a result: The second sort takes
relocation dependencies into account, and other differences can result
from ambiguous inputs, such as cycles. (The force_first handling in
_dl_sort_maps is not effective for dlclose.) After the changes in
this commit, there is still a required difference due to
dlopen/dlclose ordering by the application, but the previous
discrepancies went beyond that.
A new global (namespace-spanning) list of link maps,
_dl_init_called_list, is updated right before ELF constructors are
called from _dl_init.
In dl_close_worker, the maps variable, an on-stack variable length
array, is eliminated. (VLAs are problematic, and dlclose should not
call malloc because it cannot readily deal with malloc failure.)
Marking still-used objects uses the namespace list directly, with
next and next_idx replacing the done_index variable.
After marking, _dl_init_called_list is used to call the destructors
of now-unused maps in reverse destructor order. These destructors
can call dlopen. Previously, new objects do not have l_map_used set.
This had to change: There is no copy of the link map list anymore,
so processing would cover newly opened (and unmarked) mappings,
unloading them. Now, _dl_init (indirectly) sets l_map_used, too.
(dlclose is handled by the existing reentrancy guard.)
After _dl_init_called_list traversal, two more loops follow. The
processing order changes to the original link map order in the
namespace. Previously, dependency order was used. The difference
should not matter because relocation dependencies could already
reorder link maps in the old code.
The changes to _dl_fini remove the sorting step and replace it with
a traversal of _dl_init_called_list. The l_direct_opencount
decrement outside the loader lock is removed because it appears
incorrect: the counter manipulation could race with other dynamic
loader operations.
tst-audit23 needs adjustments to the changes in LA_ACT_DELETE
notifications. The new approach for checking la_activity should
make it clearer that la_activty calls come in pairs around namespace
updates.
The dependency sorting test cases need updates because the destructor
order is always the opposite order of constructor order, even with
relocation dependencies or cycles present.
There is a future cleanup opportunity to remove the now-constant
force_first and for_fini arguments from the _dl_sort_maps function.
Fixes commit 1df71d32fe ("elf: Implement
force_first handling in _dl_sort_maps_dfs (bug 28937)").
Reviewed-by: DJ Delorie <dj@redhat.com>
Commit 5f828ff824 ("io: Fix F_GETLK, F_SETLK, and F_SETLKW for
powerpc64") fixed an issue with the value of the lock constants on
powerpc64 when not using __USE_FILE_OFFSET64, but it ended-up also
changing the value when using __USE_FILE_OFFSET64 causing an API change.
Fix that by also checking that define, restoring the pre
4d0fe291ae commit values:
Default values:
- F_GETLK: 5
- F_SETLK: 6
- F_SETLKW: 7
With -D_FILE_OFFSET_BITS=64:
- F_GETLK: 12
- F_SETLK: 13
- F_SETLKW: 14
At the same time, it has been noticed that there was no test for io lock
with __USE_FILE_OFFSET64, so just add one.
Tested on x86_64-linux-gnu, i686-linux-gnu and
powerpc64le-unknown-linux-gnu.
Resolves: BZ #30804.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
XTheadBb has similar instructions like Zbb, which allow optimized
string processing:
* th.ff0: find-first zero is a CLZ instruction.
* th.tstnbz: Similar like orc.b, but with a bit-inverted result.
The instructions are documented here:
https://github.com/T-head-Semi/thead-extension-spec/tree/master/xtheadbb
These instructions can be found in the T-Head C906 and the C910.
Tested with the string tests.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This code is generally unused in practice since there don't seem to be
any NSS modules that only implement _nss_MOD_gethostbyname2_r and not
_nss_MOD_gethostbyname3_r.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
This interface allows to obtain the associated process ID from the
process file descriptor. It is done by parsing the procps fdinfo
information. Its prototype is:
pid_t pidfd_getpid (int fd)
It returns the associated pid or -1 in case of an error and sets the
errno accordingly. The possible errno values are those from open, read,
and close (used on procps parsing), along with:
- EBADF if the FD is negative, does not have a PID associated, or if
the fdinfo fields contain a value larger than pid_t.
- EREMOTE if the PID is in a separate namespace.
- ESRCH if the process is already terminated.
Checked on x86_64-linux-gnu on Linux 4.15 (no CLONE_PIDFD or waitid
support), Linux 5.4 (full support), and Linux 6.2.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Returning a pidfd allows a process to keep a race-free handle for a
child process, otherwise, the caller will need to either use pidfd_open
(which still might be subject to TOCTOU) or keep the old racy interface
base on pid_t.
To correct use pifd_spawn, the kernel must support not only returning
the pidfd with clone/clone3 but also waitid (P_PIDFD) (added on Linux
5.4). If kernel does not support the waitid, pidfd return ENOSYS.
It avoids the need to racy workarounds, such as reading the procfs
fdinfo to get the pid to use along with other wait interfaces.
These interfaces are similar to the posix_spawn and posix_spawnp, with
the only difference being it returns a process file descriptor (int)
instead of a process ID (pid_t). Their prototypes are:
int pidfd_spawn (int *restrict pidfd,
const char *restrict file,
const posix_spawn_file_actions_t *restrict facts,
const posix_spawnattr_t *restrict attrp,
char *const argv[restrict],
char *const envp[restrict])
int pidfd_spawnp (int *restrict pidfd,
const char *restrict path,
const posix_spawn_file_actions_t *restrict facts,
const posix_spawnattr_t *restrict attrp,
char *const argv[restrict_arr],
char *const envp[restrict_arr]);
A new symbol is used instead of a posix_spawn extension to avoid
possible issues with language bindings that might track the return
argument lifetime. Although on Linux pid_t and int are interchangeable,
POSIX only states that pid_t should be a signed integer.
Both symbols reuse the posix_spawn posix_spawn_file_actions_t and
posix_spawnattr_t, to void rehash posix_spawn API or add a new one. It
also means that both interfaces support the same attribute and file
actions, and a new flag or file action on posix_spawn is also added
automatically for pidfd_spawn.
Also, using posix_spawn plumbing allows the reusing of most of the
current testing with some changes:
- waitid is used instead of waitpid since it is a more generic
interface.
- tst-posix_spawn-setsid.c is adapted to take into consideration that
the caller can check for session id directly. The test now spawns
itself and writes the session id as a file instead.
- tst-spawn3.c need to know where pidfd_spawn is used so it keeps an
extra file description unused.
Checked on x86_64-linux-gnu on Linux 4.15 (no CLONE_PIDFD or waitid
support), Linux 5.4 (full support), and Linux 6.2.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
These functions allow to posix_spawn and posix_spawnp to use
CLONE_INTO_CGROUP with clone3, allowing the child process to
be created in a different cgroup version 2. These are GNU
extensions that are available only for Linux, and also only
for the architectures that implement clone3 wrapper
(HAVE_CLONE3_WRAPPER).
To create a process on a different cgroupv2, one can use the:
posix_spawnattr_t attr;
posix_spawnattr_init (&attr);
posix_spawnattr_setflags (&attr, POSIX_SPAWN_SETCGROUP);
posix_spawnattr_setcgroup_np (&attr, cgroup);
posix_spawn (...)
Similar to other posix_spawn flags, POSIX_SPAWN_SETCGROUP control
whether the cgroup file descriptor will be used or not with
clone3.
There is no fallback if either clone3 does not support the flag
or if the architecture does not provide the clone3 wrapper, in
this case posix_spawn returns EOPNOTSUPP.
Checked on x86_64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
It follows the internal signature:
extern int clone3 (struct clone_args *__cl_args, size_t __size,
int (*__func) (void *__arg), void *__arg);
Checked on mips64el-linux-gnueabihf, mips64el-n32-linux-gnu, and
mipsel-linux-gnu.
It follows the internal signature:
extern int clone3 (struct clone_args *__cl_args, size_t __size,
int (*__func) (void *__arg), void *__arg);
Checked on arm-linux-gnueabihf.
In short: __tls_get_addr checks the global generation counter and if
the current dtv is older then _dl_update_slotinfo updates dtv up to the
generation of the accessed module. So if the global generation is newer
than generation of the module then __tls_get_addr keeps hitting the
slow dtv update path. The dtv update path includes a number of checks
to see if any update is needed and this already causes measurable tls
access slow down after dlopen.
It may be possible to detect up-to-date dtv faster. But if there are
many modules loaded (> TLS_SLOTINFO_SURPLUS) then this requires at
least walking the slotinfo list.
This patch tries to update the dtv to the global generation instead, so
after a dlopen the tls access slow path is only hit once. The modules
with larger generation than the accessed one were not necessarily
synchronized before, so additional synchronization is needed.
This patch uses acquire/release synchronization when accessing the
generation counter.
Note: in the x86_64 version of dl-tls.c the generation is only loaded
once, since relaxed mo is not faster than acquire mo load.
I have not benchmarked this. Tested by Adhemerval Zanella on aarch64,
powerpc, sparc, x86 who reported that it fixes the performance issue
of bug 19924.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The old Intel software developer manual specified that the low byte of
EAX of CPUID leaf 2 returned 1 which indicated the number of rounds of
CPUDID leaf 2 was needed to retrieve the complete cache information. The
newer Intel manual has been changed to that it should always return 1
and be ignored. If the lower byte isn't 1, CPUID leaf 2 can't be used.
In this case, we ignore CPUID leaf 2 and use CPUID leaf 4 instead. If
CPUID leaf 4 doesn't contain the cache information, cache information
isn't available at all. This addresses BZ #30643.
According to glibc memcmp microbenchmark test results(Add generic
memcmp), this implementation have performance improvement
except the length is less than 3, details as below:
Name Percent of time reduced
memcmp-lasx 16%-74%
memcmp-lsx 20%-50%
memcmp-aligned 5%-20%
According to glibc memset microbenchmark test results, for LSX and LASX
versions, A few cases with length less than 8 experience performace
degradation, overall, the LASX version could reduce the runtime about
15% - 75%, LSX version could reduce the runtime about 15%-50%.
The unaligned version uses unaligned memmory access to set data which
length is less than 64 and make address aligned with 8. For this part,
the performace is better than aligned version. Comparing with the generic
version, the performance is close when the length is larger than 128. When
the length is 8-128, the unaligned version could reduce the runtime about
30%-70%, the aligned version could reduce the runtime about 20%-50%.
According to glibc memrchr microbenchmark, this implementation could reduce
the runtime as following:
Name Percent of rutime reduced
memrchr-lasx 20%-83%
memrchr-lsx 20%-64%
According to glibc memchr microbenchmark, this implementation could reduce
the runtime as following:
Name Percent of runtime reduced
memchr-lasx 37%-83%
memchr-lsx 30%-66%
memchr-aligned 0%-15%
According to glibc rawmemchr microbenchmark, A few cases tested with
char '\0' experience performance degradation due to the lasx and lsx
versions don't handle the '\0' separately. Overall, rawmemchr-lasx
implementation could reduce the runtime about 40%-80%, rawmemchr-lsx
implementation could reduce the runtime about 40%-66%, rawmemchr-aligned
implementation could reduce the runtime about 20%-40%.
We are requiring Binutils >= 2.41, so explicit relocation syntax is
always supported by the assembler. Use it to reduce one instruction.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
This patch adds the new F_SEAL_EXEC constant from Linux 6.3 (see Linux
commit 6fd7353829c ("mm/memfd: add F_SEAL_EXEC") to bits/fcntl-linux.h.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch adds a new macro, M68K_SCALE_AVAILABLE, similar to gmp
scale_available_p (mpn/m68k/m68k-defs.m4) that expand to 1 if a
scale factor can be used in addressing modes. This is used
instead of __mc68020__ for some optimization decisions.
Checked on a build for m68k-linux-gnu target mc68020 and mc68040.
GCC currently does not define __mc68020__ for -mcpu=68040 or higher,
which memcpy/memmove assumptions. Since this memory copy optimization
seems only intended for m68020, disable for other m680X0 variants.
Checked on a build for m68k-linux-gnu target mc68020 and mc68040.
Based on the glibc microbenchmark, only a few short inputs with this
strncmp-aligned and strncmp-lsx implementation experience performance
degradation, overall, strncmp-aligned could reduce the runtime 0%-10%
for aligned comparision, 10%-25% for unaligend comparision, strncmp-lsx
could reduce the runtime about 0%-60%.
Based on the glibc microbenchmark, strcmp-aligned implementation could
reduce the runtime 0%-10% for aligned comparison, 10%-20% for unaligned
comparison, strcmp-lsx implemenation could reduce the runtime 0%-50%.
Based on the glibc microbenchmark, strnlen-aligned implementation could
reduce the runtime more than 10%, strnlen-lsx implementation could reduce
the runtime about 50%-78%, strnlen-lasx implementation could reduce the
runtime about 50%-88%.
The path auxv[*].a_val could either be an integer or a string,
depending on the a_type value. Use a separate field, a_val_string, to
simplify mechanical parsing of the --list-diagnostics output.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
On Skylake, it changes log1p bench performance by:
Before After Improvement
max 63.349 58.347 8%
min 4.448 5.651 -30%
mean 12.0674 10.336 14%
The minimum code path is
if (hx < 0x3FDA827A) /* x < 0.41422 */
{
if (__glibc_unlikely (ax >= 0x3ff00000)) /* x <= -1.0 */
{
...
}
if (__glibc_unlikely (ax < 0x3e200000)) /* |x| < 2**-29 */
{
math_force_eval (two54 + x); /* raise inexact */
if (ax < 0x3c900000) /* |x| < 2**-54 */
{
...
}
else
return x - x * x * 0.5;
FMA and non-FMA code sequences look similar. Non-FMA version is slightly
faster. Since log1p is called by asinh and atanh, it improves asinh
performance by:
Before After Improvement
max 75.645 63.135 16%
min 10.074 10.071 0%
mean 15.9483 14.9089 6%
and improves atanh performance by:
Before After Improvement
max 91.768 75.081 18%
min 15.548 13.883 10%
mean 18.3713 16.8011 8%
The static PIE configure check uses link tests. When bootstrapping
a cross-toolchain, the link tests fail due to missing crt-files /
libc.so. As we explicitely want to test an issue in binutils (ld),
we now also explicitely check for known linker versions.
See also commit 368b7c614b
S390: Use compile-only instead of also link-tests in configure.
These implementations improve the time to copy data in the glibc
microbenchmark as below:
memcpy-lasx reduces the runtime about 8%-76%
memcpy-lsx reduces the runtime about 8%-72%
memcpy-unaligned reduces the runtime of unaligned data copying up to 40%
memcpy-aligned reduece the runtime of unaligned data copying up to 25%
memmove-lasx reduces the runtime about 20%-73%
memmove-lsx reduces the runtime about 50%
memmove-unaligned reduces the runtime of unaligned data moving up to 40%
memmove-aligned reduces the runtime of unaligned data moving up to 25%
These implementations improve the time to run strchr{nul}
microbenchmark in glibc as below:
strchr-lasx reduces the runtime about 50%-83%
strchr-lsx reduces the runtime about 30%-67%
strchr-aligned reduces the runtime about 10%-20%
strchrnul-lasx reduces the runtime about 50%-83%
strchrnul-lsx reduces the runtime about 36%-65%
strchrnul-aligned reduces the runtime about 6%-10%
SYS_modify_ldt requires CONFIG_MODIFY_LDT_SYSCALL to be set in the kernel, which
some distributions may disable for hardening. Check if that's the case (unset)
and mark the test as UNSUPPORTED if so.
Reviewed-by: DJ Delorie <dj@redhat.com>
Signed-off-by: Sam James <sam@gentoo.org>
All callers pass 1 or 0x11 anyway (same meaning according to man page),
but still.
Reviewed-by: DJ Delorie <dj@redhat.com>
Signed-off-by: Sam James <sam@gentoo.org>
On Skylake, it improves expm1 bench performance by:
Before After Improvement
max 70.204 68.054 3%
min 20.709 16.2 22%
mean 22.1221 16.7367 24%
NB: Add
extern long double __expm1l (long double);
extern long double __expm1f128 (long double);
for __typeof (__expm1l) and __typeof (__expm1f128) when __expm1 is
defined since __expm1 may be expanded in their declarations which
causes the build failure.
strlen-lasx is implemeted by LASX simd instructions(256bit)
strlen-lsx is implemeted by LSX simd instructions(128bit)
strlen-align is implemented by LA basic instructions and never use unaligned memory acess
LoongArch glibc can add some LASX/LSX vector instructions codes,
change the required minimum binutils version to 2.41 which could
support vector instructions. HAVE_LOONGARCH_VEC_ASM is removed
accordingly.
The following usage of macro LEAF/ENTRY are all feasible:
1. LEAF(fcn) -- the align value of fcn is .align 3(default value)
2. LEAF(fcn, 6) -- the align value of fcn is .align 6
The:
```
if (shared_per_thread > 0 && threads > 0)
shared_per_thread /= threads;
```
Code was accidentally moved to inside the else scope. This doesn't
match how it was previously (before af992e7abd).
This patch fixes that by putting the division after the `else` block.
The nscd daemon caches hosts data from NSS modules verbatim, without
filtering protocol families or sorting them (otherwise separate caches
would be needed for certain ai_flags combinations). The cache
implementation is complete separate from the getaddrinfo code. This
means that rebuilding getaddrinfo is not needed. The only function
actually used is __bump_nl_timestamp from check_pf.c, and this change
moves it into nscd/connections.c.
Tested on x86_64-linux-gnu with -fexceptions, built with
build-many-glibcs.py. I also backported this patch into a distribution
that still supports nscd and verified manually that caching still works.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Since i686 provides the fortified wrappers for memcpy, mempcpy,
memmove, and memset on the same string implementation, the static
build tries to optimized it by not tying the fortified wrappers
to string routine (to avoid pulling the fortify function if
they are not required).
Checked on i686-linux-gnu building with different option:
default and --disable-multi-arch plus default, --disable-default-pie,
--enable-fortify-source={2,3}, and --enable-fortify-source={2,3}
with --disable-default-pie.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
With multiarch disabled, the default memmove implementation provides
the fortify routines for memcpy, mempcpy, and memmove. However, it
does not provide the internal hidden definitions used when building
with fortify enabled. The memset has a similar issue.
Checked on x86_64-linux-gnu building with different options:
default and --disable-multi-arch plus default, --disable-default-pie,
--enable-fortify-source={2,3}, and --enable-fortify-source={2,3}
with --disable-default-pie.
Tested-by: Andreas K. Huettel <dilfridge@gentoo.org>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Linux 6.4 adds new constants PTRACE_SET_SYSCALL_USER_DISPATCH_CONFIG
and PTRACE_GET_SYSCALL_USER_DISPATCH_CONFIG. Add those to all
relevant sys/ptrace.h headers, along with adding the associated
argument structure to bits/ptrace-shared.h (named struct
__ptrace_sud_config there following the usual convention for such
structures).
Tested for x86_64 and with build-many-glibcs.py.
Making error_t defined to enum __error_t_codes conveniently makes the
debugger print symbolic values, but in C++ int is not interoperable with
enum __error_t_codes, leading to C++ application build issues, so let's
revert error_t to int in C++.
This is the only missing part in struct statvfs.
The LSB calls [f]statfs() deprecated, and its weird types are definitely
off-putting. However, its use is required to get f_type.
Instead, allocate one of the six spares to f_type,
copied directly from struct statfs.
This then becomes a small glibc extension to the standard interface
on Linux and the Hurd, instead of two different interfaces, one of which
is quite odd due to being an ABI type, and there no longer is any reason
to use statfs().
The underlying kernel type is a mess, but all architectures agree on u32
(or more) for the ABI, and all filesystem magicks are 32-bit integers.
We don't lose any generality by using u32, and by doing so we both make
the API consistent with the Hurd, and allow C++
switch(f_type) { case RAMFS_MAGIC: ...; }
Also fix tst-statvfs so that it actually fails;
as it stood, all it did was return 0 always.
Test statfs()' and statvfs()' f_types are the same.
Link: https://lore.kernel.org/linux-man/f54kudgblgk643u32tb6at4cd3kkzha6hslahv24szs4raroaz@ogivjbfdaqtb/t/#u
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
When using jemalloc, malloc() needs to use TSD, while libpthread
initialization needs malloc(). Having ___pthread_self set early to some
static storage allows TSD to work early, thus allowing jemalloc and
libpthread to initialize together.
This incidentaly simplifies __pthread_enable/disable_asynccancel and
__pthread_self, now that ___pthread_self is always initialized.
When using jemalloc, malloc() needs to use TSD, while libpthread
initialization needs malloc(). Supporting a static TSD area allows jemalloc
and libpthread to initialize together.
Some legacy AMD CPUs and hypervisors have the _cpuid_ '0x8000_001D'
set to Zero, thus resulting in zeroed-out computed cache values.
This patch reintroduces the old way of cache computation as a
fail-safe option to handle these exceptions.
Fixed 'level4_cache_size' value through handle_amd().
Reviewed-by: Premachandra Mallappa <premachandra.mallappa@amd.com>
Tested-by: Florian Weimer <fweimer@redhat.com>
04bf7d2d8a ("chk: Add and fix hidden builtin definitions for *_chk")
added an #undef for longjmp and siglongjmp to compensate for the
definition in include/setjmp.h, but missed doing so for the powerpc
version too.
Fixes: 04bf7d2d8a ("chk: Add and fix hidden builtin definitions for
*_chk")
This patch updates the kernel version in the tests tst-mman-consts.py,
tst-mount-consts.py and tst-pidfd-consts.py to 6.4. (There are no new
constants covered by these tests in 6.4 that need any other header
changes.)
Tested with build-many-glibcs.py.
