soft-fp unpacking for x86 "extended" fails to clear the implicit
mantissa high bit that is explicit in that format, resulting in
problems for operations that expect this bit to be clear in raw
unpacked values. Specifically, the code for this format is used only
for conversions to and from TFmode (__float128) in libgcc, where this
issue results in GCC bug 77265, extension of long double infinity to
__float128 wrongly produces a NaN.
This patch fixes this by always masking out the implicit bit on
unpacking, so that the results of unpacking meet the expectations of
the rest of the soft-fp code for a normal IEEE format.
Tested for x86_64 in libgcc in conjunction with a GCC testcase for
this issue (this code isn't used in glibc, only in libgcc).
* soft-fp/extended.h [_FP_W_TYPE_SIZE < 64] (FP_UNPACK_RAW_E):
Mask implicit bit out of unpacked value.
[_FP_W_TYPE_SIZE < 64] (FP_UNPACK_RAW_EP): Likewise.
[_FP_W_TYPE_SIZE >= 64] (FP_UNPACK_RAW_E): Likewise.
[_FP_W_TYPE_SIZE >= 64] (FP_UNPACK_RAW_EP): Likewise.
TS 18661-1 defines an fesetexcept function for setting floating-point
exception flags without the side-effect of causing enabled traps to be
taken.
This patch series implements this function for glibc. The present
patch adds the fallback stub implementation, x86 and x86_64
implementations, documentation, tests and ABI baseline updates. The
remaining patches, some of them untested, add implementations for
other architectures. The implementations generally follow those of
the fesetexceptflag function.
As for fesetexceptflag, the approach taken for architectures where
setting flags causes enabled traps to be taken is to set the flags
(and potentially cause traps) rather than refusing to set the flags
and returning an error. Since ISO C and TS 18661 provide no way to
enable traps, this is formally in accordance with the standards.
The NEWS entry should be considered a placeholder, since this patch
series is intended to be followed by further such series adding other
TS 18661-1 features, so that the NEWS entry would end up looking more
like
* New <fenv.h> features from TS 18661-1:2014 are added to libm: the
fesetexcept, fetestexceptflag, fegetmode and fesetmode functions,
the femode_t type and the FE_DFL_MODE macro.
with hopefully more such entries for other features, rather than
having an entry for a single function in the end.
I believe we have consensus for adding TS 18661-1 interfaces as per
<https://sourceware.org/ml/libc-alpha/2016-06/msg00421.html>.
Tested for x86_64, x86, mips64 (hard float, and soft float to test the
fallback version), arm (hard float) and powerpc (hard float, soft
float and e500).
* math/fesetexcept.c: New file.
* sysdeps/i386/fpu/fesetexcept.c: Likewise.
* sysdeps/x86_64/fpu/fesetexcept.c: Likewise.
* math/fenv.h: Define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
<bits/libc-header-start.h> instead of including <features.h>.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetexcept): New function
declaration.
* manual/arith.texi (fesetexcept): Document function.
* math/Versions (fesetexcept): New libm symbol at version
GLIBC_2.25.
* math/Makefile (libm-support): Add fesetexcept.
(tests): Add test-fesetexcept and test-fesetexcept-traps.
* math/test-fesetexcept.c: New file.
* math/test-fesetexcept-traps.c: Likewise.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
It turns out that due to the reduced stack size in tst-tls3 and the
(fixed) default stack cache size, allocated TLS variables are never
freed, so the test coverage for tst-tls3-malloc is less than complete.
This change increases the thread stack size for tst-tls3-malloc only,
to make sure thread stacks and TLS variables are freed.
ISO C allows feraiseexcept to raise "inexact", in addition to the
requested exceptions, when requested to raise "overflow" or
"underflow". Testing on ARM and PowerPC e500 (where glibc's
feraiseexcept has this property) showed that the new test-fexcept test
failed to allow for this; this patch fixes it, by wrapping
feraiseexcept to clear FE_INEXACT if implicitly raised and not raised
before the call. (It would also be possible to do this with
fesetexcept, which always affects exactly the requested flags, but
this patch avoids making this fix depend on the fesetexcept changes.)
Tested for x86_64, x86, arm and e500.
* math/test-fexcept.c (feraiseexcept_exact): New function.
(test_set): Call feraiseexcept_exact instead of feraiseexcept.
(test_except): Likewise.
As shown by the test math/test-fexcept, the powerpc fesetexceptflag
implementation fails to clear a previously set FE_INVALID flag, when
that flag is clear in the saved exceptions and FE_INVALID is included
in the mask of flags to restore, because it fails to mask out the
sub-exceptions of FE_INVALID from the FPSCR state. This patch fixes
the masking logic accordingly.
Tested for powerpc.
[BZ #20455]
* sysdeps/powerpc/fpu/fsetexcptflg.c (__fesetexceptflag): Mask out
all FE_INVALID sub-exceptions from FPSCR when FE_INVALID specified
to be restored.
I noticed that there was no meaningful test coverage for
fegetexceptflag and fesetexceptflag (one test ensures that calls to
them compile and link, but nothing to verify they work correctly).
This patch adds tests for these functions.
fesetexceptflag is meant to set the relevant exception flag bits to
the saved state without causing enabled traps to be taken. On some
architectures, it is not possible to set exception flag bits without
causing enabled traps to occur. Such architectures need to define
EXCEPTION_SET_FORCES_TRAP to 1 in their math-tests.h, as is done in
this patch for powerpc. x86 avoids needing to define this because the
traps resulting from setting exception bits don't occur until the next
floating-point operation or fwait instruction.
Tested for x86_64, x86 and powerpc. Note that test-fexcept fails for
powerpc because of a pre-existing bug in fesetexceptflag for powerpc,
which I'll fix separately.
* math/test-fexcept-traps.c: New file.
* math/test-fexcept.c: Likewise.
* math/Makefile (tests): Add test-fexcept and test-fexcept-traps.
* sysdeps/generic/math-tests.h (EXCEPTION_SET_FORCES_TRAP): New
macro.
* sysdeps/powerpc/math-tests.h [!__NO_FPRS__]
(EXCEPTION_SET_FORCES_TRAP): Likewise.
sparc32 passes floating point values in the integer registers. VIS3
instructions gives access to the movwtos instruction to directly
transfer a value from an integer register to a floating point register.
Therefore it makes sense to provide a VIS3 version consisting in the
generic version compiled with -mvis3.
Changelog:
* math/s_fdim.c: Avoid alias renamed.
* math/s_fdimf.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile
[$(subdir) = math && $(have-as-vis3) = yes] (libm-sysdep_routines):
Add s_fdimf-vis3, s_fdim-vis3.
(CFLAGS-s_fdimf-vis3.c): New. Set to -Wa,-Av9d -mvis3.
(CFLAGS-s_fdim-vis3.c): Likewise.
sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim-vis3.c: New file.
sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim.c: Likewise.
The fdim and fdimf functions on sparc do not fully follow the standard
and do not set errno to ERANGE when the result overflows. Since glibc
2.24 this causes the two following tests to fail:
Failure: fdim (max_value, -max_value): errno set to 0, expected 34 (ERANGE)
Failure: fdim_upward (max_value, -max_value): errno set to 0, expected 34 (ERANGE)
It happens that using GCC with the generic C code generates very similar
code to the sparc specific implementations. Therefore this patches
remove them. Note it might still worth adding a vis3 specific version of
fdim on sparc32/sparcv9, this is done in a following patch to ease
backporting.
Changelog:
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile
[$(subdir) = math && $(have-as-vis3) = yes] (libm-sysdep_routines):
Remove s_fdimf-vis3, s_fdim-vis3.
* sysdeps/sparc/sparc32/fpu/s_fdim.S: Delete file.
* sysdeps/sparc/sparc32/fpu/s_fdimf.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim-vis3.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdimf-vis3.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdimf.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fdim.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fdimf.S: Likewise.
* sysdeps/sparc/sparc64/fpu/s_fdim.S: Likewise.
* sysdeps/sparc/sparc64/fpu/s_fdimf.S: Likewise.
When building for sparc32/sparcv9 or sparc64, we assume that VIS
instructions are available and use them in the sparc specific assembly
code. However we do not tell GCC to use such instructions, resulting in
slightly suboptimal code.
Fix that by passing -Wa,-Av9a -mvis to GCC.
Changelog:
* sysdeps/sparc/sparc32/sparcv9/Makefile (sysdep-CFLAGS): Add -mvis.
* sysdeps/sparc/sparc64/Makefile (sysdep-CFLAGS): New. Define to
-Wa,-Av9a -mvis.
When bootstrapping float128, this exposed a number of areas where
the L suffix is incorrectly applied to simple expressions when it
should be applied to each constant in the expression.
In order to stave off more macros in libm-test.inc, apply_lit is
made slightly more intelligent. It will now split expressions
based on space characters, and attempt to apply LIT() to each
token.
Having done this, there are numerous spacing issues within
libm-test.inc which have been fixed.
The above is problematic when the L real suffix is not the most
expressive modifier, and the compiler complains (i.e ppc64) or
silently truncates a value (i.e ppc64).
math.h has a comment about definitions from <bits/mathdef.h>. This
comment is in the wrong place in math.h, far below the inclusion of
<bits/mathdef.h>. It was originally above the inclusion, but the
inclusion was moved by
1998-11-05 Ulrich Drepper <drepper@cygnus.com>
* math/math.h: Unconditionally include bits/mathdef.h. Declare
long double functions only if __NO_LONG_DOUBLE_MATH is not
defined.
[...]
without moving the comment. Furthermore, the comment refers
incorrectly to FLT_EVAL_METHOD and DECIMAL_DIG, which are actually
<float.h> macros, and INFINITY, which is in <bits/inf.h>.
This patch moves the comment back above the include it refers to and
removes the description of macros not defined by the header.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* math/math.h: Move comment about <bits/mathdef.h> definitions
above inclusion of <bits/mathdef.h>. Do not mention
FLT_EVAL_METHOD, INFINITY or DECIMAL_DIG in that comment.
When libm functions return a NaN: if it is for NaN input, it should be
computed from that input (e.g. adding it to itself), so that payloads
are propagated and signaling NaNs quieted, while if it is for non-NaN
input, it should be produced by a computation such as
(x - x) / (x - x), which raises "invalid" at the same time as
producing an appropriate NaN, so avoiding any need for a call to
feraiseexcept.
Various libm functions, however, call __nan ("") (or __nanf or __nanl)
to determine the NaN to return, together with using feraiseexcept
(FE_INVALID) to raise the exception. sysdeps/generic/math_private.h
has an optimization for those functions with constant "" argument so
this doesn't actually involve a call to the __nan function, but it is
still not the preferred approach for producing NaNs. (The optimized
code also always uses the NAN macro, i.e. produces a default NaN for
float converted to whatever the target type is, and on some
architectures that may not be the same as the preferred default NaN
for double or long double.)
This patch fixes the scalb functions to use the conventional method of
generating NaNs and raising "invalid" with an appropriate
computation. (Most instances of this issue are in the complex
functions, where it can more readily be fixed once they have been made
type-generic and so only a third as many places need fixing. Some of
the complex functions use __nan ("") + __nan (""), where the addition
serves no purpose whatsoever.)
Tested for x86_64 and x86.
* math/e_scalb.c: Do not include <fenv.h>.
(invalid_fn): Do calculation resulting in NaN instead of raising
FE_INVALID and returning a NaN explicitly.
* math/e_scalbf.c: Do not include <fenv.h>.
(invalid_fn): Do calculation resulting in NaN instead of raising
FE_INVALID and returning a NaN explicitly.
* math/e_scalbl.c: Do not include <fenv.h>.
(invalid_fn): Do calculation resulting in NaN instead of raising
FE_INVALID and returning a NaN explicitly.
Static libraries can use the sysdep.o copy in libc.a without
a performance penalty. This results in a visible difference
if libpthread.a is relinked into a single object file (which
is needed to support libraries which check for the presence
of certain symbols to enable threading support, which generally
fails with static linking unless libpthread.a is relinked).
My __STDC_WANT_IEC_60559_BFP_EXT__ patch omitted to update the
conditions on the nextup and nextdown type-generic macros in
<tgmath.h>. This patch updates those conditions accordingly. (As
glibc doesn't currently have an exp10 type-generic macro, no such
changes are needed relating to __STDC_WANT_IEC_60559_FUNCS_EXT__;
adding such a type-generic macro would be a new feature.)
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch). Committed.
* math/tgmath.h (nextdown): Define if
[__GLIBC_USE (IEC_60559_BFP_EXT)], not if [__USE_GNU].
(nextup): Likewise.
This patch implements support for the
__STDC_WANT_IEC_60559_FUNCS_EXT__ feature test macro, following the
__GLIBC_USE approach used for other ISO C feature test macros.
Currently this only affects the exp10 functions (which glibc has had
for a long time).
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* bits/libc-header-start.h (__GLIBC_USE_IEC_60559_FUNCS_EXT): New
macro.
* include/features.h (__STDC_WANT_IEC_60559_FUNCS_EXT__):
Document.
* manual/creature.texi (__STDC_WANT_IEC_60559_FUNCS_EXT__):
Document macro.
* manual/math.texi (exp10): Document as ISO from TS 18661-4:2015.
(exp10f): Likewise.
(exp10l): Likewise.
* math/bits/mathcalls.h (exp10): Declare if
[__GLIBC_USE (IEC_60559_FUNCS_EXT)], not [__USE_GNU].
The macros defined by <sys/sysmacros.h> are not part of POSIX nor XSI, and
their names frequently collide with user code; see for instance glibc bug
19239 and Red Hat bug 130601. <stdlib.h> includes <sys/types.h> under
_GNU_SOURCE, and C++ code presently cannot avoid being compiled under
_GNU_SOURCE, exacerbating the problem.
* NEWS: Inclusion of <sys/sysmacros.h> by <sys/types.h> is deprecated.
* misc/sys/sysmacros.h: If __SYSMACROS_DEPRECATED_INCLUSION is defined,
define major, minor, and makedev to issue deprecation warnings on use.
If __SYSMACROS_DEPRECATED_INCLUSION is *not* defined, suppress
previously-activated deprecation warnings for these macros and prevent
subsequent inclusions of this header from having any effect.
* posix/sys/types.h: Define __SYSMACROS_DEPRECATED_INCLUSION before
including <sys/sysmacros.h>, and undefine it again afterward.
Presently sys/sysmacros.h is entirely defined in sysdeps. This would
mean that the deprecation logic coming up in the next patch would have
to be written twice (in generic/ and unix/sysv/linux/). To avoid that,
hoist all but the unavoidably system-dependent logic to misc/, leaving a
bits/ header behind. This also promotes the Linux-specific encoding of
dev_t, which accommodates 32-bit major and minor numbers in a 64-bit dev_t,
to generic, as glibc's dev_t is always 64 bits wide.
The former Linux implementation used inline functions to avoid evaluating
arguments more than once. After this change, all platforms use inline
functions, which means that three new symbols are added to the generic ABI.
(These symbols are in the user namespace, which is how they have always
been on Linux. They begin with "gnu_dev_", so collisions with user code
are pretty unlikely.)
New ports henceforth need only provide a bits/sysmacros.h defining
internal macros __SYSMACROS_{DECLARE,DEFINE}_{MAJOR,MINOR,MAKEDEV}.
This is only necessary if the kernel encoding is incompatible with
the now-generic encoding (for instance, it would be necessary for
FreeBSD).
While I was at it, I added a basic round-trip test for these functions.
* sysdeps/generic/sys/sysmacros.h: Delete file.
* sysdeps/unix/sysv/linux/makedev.c: Delete file.
* sysdeps/unix/sysv/linux/sys/sysmacros.h: Move file ...
* bits/sysmacros.h: ... here; this encoding is now the generic
encoding. Now defines only the following macros:
__SYSMACROS_DECLARE_MAJOR, __SYSMACROS_DEFINE_MAJOR,
__SYSMACROS_DECLARE_MINOR, __SYSMACROS_DEFINE_MINOR,
__SYSMACROS_DECLARE_MAKEDEV, __SYSMACROS_DEFINE_MAKEDEV.
* misc/sys/sysmacros.h, misc/makedev.c: New files that use
bits/sysmacros.h and the above new macros to generate the
public implementations of major, minor, and makedev.
* misc/tst-makedev.c: New test.
* include/sys/sysmacros.h: New wrapper.
* misc/Makefile (headers): Add sys/sysmacros.h, bits/sysmacros.h.
(routines): Add makedev.
(tests): Add tst-makedev.
* misc/Versions [GLIBC_2.25]: Add gnu_dev_major, gnu_dev_minor,
gnu_dev_makedev.
* posix/Makefile (headers): Remove sys/sysmacros.h.
* sysdeps/unix/sysv/linux/Makefile (sysdep_routines): Remove makedev.
* sysdeps/arm/nacl/libc.abilist: Add GLIBC_2.25,
gnu_dev_major, gnu_dev_makedev, gnu_dev_minor.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist
* sysdeps/unix/sysv/linux/alpha/libc.abilist
* sysdeps/unix/sysv/linux/arm/libc.abilist
* sysdeps/unix/sysv/linux/hppa/libc.abilist
* sysdeps/unix/sysv/linux/i386/libc.abilist
* sysdeps/unix/sysv/linux/ia64/libc.abilist
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist
* sysdeps/unix/sysv/linux/microblaze/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist
* sysdeps/unix/sysv/linux/nios2/libc.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist
* sysdeps/unix/sysv/linux/sh/libc.abilist
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist:
Add GLIBC_2.25.
There are three new macros added to features.h and sys/cdefs.h:
* __glibc_clang_prereq: just like __GNUC_PREREQ, but for clang.
* __glibc_clang_has_extension: wraps clang's intrinsic __has_extension.
Writing "#if defined __clang__ && __has_extension (...)" doesn't work,
because compilers other than clang will object to the unknown macro
__has_extension even though they don't need to evaluate it.
Instead, write "#if __glibc_clang_has_extension (...)".
* __attribute_deprecated_msg__(msg): like __attribute_deprecated__, but
if possible, prints a message.
The first two are used to define the third. The third will be used
in subsequent patches.
* include/features.h (__glibc_clang_prereq): New macro.
* misc/sys/cdefs.h (__glibc_clang_has_extension)
(__attribute_deprecated_msg__): New macros.
This patch implements support for the __STDC_WANT_IEC_60559_BFP_EXT__
feature test macro from ISO/IEC 18661-1:2014, following the
__GLIBC_USE approach now used for __STDC_WANT_LIB_EXT2__. For this
macro, the relevant consideration is whether it is defined or
undefined when an affected header is included (not what its value is
if defined, and not whether it's defined or undefined when any other
unaffected system header is included).
Currently this macro only affects the issignaling macro and the nextup
and nextdown functions (so they can be enabled by defining this macro,
not just by defining _GNU_SOURCE as previously). Any further features
from this TS added in future would also be conditioned on this macro.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* bits/libc-header-start.h (__GLIBC_USE_IEC_60559_BFP_EXT): New
macro.
* include/features.h (__STDC_WANT_IEC_60559_BFP_EXT__): Document.
* manual/arith.texi (issignaling): Document as ISO from TS
18661-1:2014.
(nextup): Likewise.
(nextupf): Likewise.
(nextupl): Likewise.
(nextdown): Likewise.
(nextdownf): Likewise.
(nextdownl): Likewise.
* manual/creature.texi (__STDC_WANT_IEC_60559_BFP_EXT__): Document
macro.
* math/math.h: Define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
<bits/libc-header-start.h> instead of including <features.h>.
(issignaling): Define if [__GLIBC_USE (IEC_60559_BFP_EXT)], not
[__USE_GNU].
* math/bits/mathcalls.h (nextdown): Declare if
[__GLIBC_USE (IEC_60559_BFP_EXT)], not [__USE_GNU].
(nextup): Likewise.
(__issignaling): Likewise.
While trying to convert the _Complex function wrappers
into a single generic implementation, a few minor
variations between identical versions emerged.
In order to support more types, the Makefile needs a few bits
shuffled.
F is explictly used as a placeholder to substitute for the
appropriate type suffix. This removes the need to demangle
_r suffixed objects.
The variable libm-compat-calls is added to house any objects which
are only built to provide compat symbols within libm. That is,
no newly added type should ever attempt building these. Note,
k_standard* files have been added there. By consensus they are
deprecated; in practice, we haven't gotten there yet.
New types would be added as noted in the comments preceding
type-TYPE-{suffix,routines,yes} variables. However, some manual
additions will still need to be done to add appropriate flags
when building the various variants of libm-test.c for a new type.
Likewise, test-ildoubl is renamed test-ildouble for consistency's
sake.
There is quiet truncation to double arithmetic in several
files. I noticed them when building ldbl-128 in a
soft-fp context. This did not change any test results.
This adds an include guard and __BEGIN/__END_DECLS to proc_service.h,
removes some extraneous "const"s, and then arranges to install the
header. The idea here is to make it more convenient to implement the
proc_service.h API.
Instead, call malloc and explicitly align the pointer.
There is no external location to store the original (unaligned)
pointer, and this commit increases the allocation size to store
the pointer at a fixed location relative to the TCB pointer.
The manual alignment means that some space goes unused which
was previously made available for subsequent allocations.
However, in the TLS_DTV_AT_TP case, the manual alignment code
avoids aligning the pre-TCB to the TLS block alignment. (Even
while using memalign, the allocation had some unused padding
in front.)
This concludes the removal of memalign calls from the TLS code,
and the new tst-tls3-malloc test verifies that only core malloc
routines are used.
Instead of a flag which indicates the pointer can be freed, dtv_t
now includes the pointer which should be freed. Due to padding,
the size of dtv_t does not increase.
To avoid using memalign, the new allocate_dtv_entry function
allocates a sufficiently large buffer so that a sub-buffer
can be found in it which starts with an aligned pointer. Both
the aligned and original pointers are kept, the latter for calling
free later.
The dynamic linker currently uses __libc_memalign for TLS-related
allocations. The goal is to switch to malloc instead. If the minimal
malloc follows the ABI fundamental alignment, we can assume that malloc
provides this alignment, and thus skip explicit alignment in a few
cases as an optimization.
It was requested on libc-alpha that MALLOC_ALIGNMENT should be used,
although this results in wasted space if MALLOC_ALIGNMENT is larger
than the fundamental alignment. (The dynamic linker cannot assume
that the non-minimal malloc will provide an alignment of
MALLOC_ALIGNMENT; the ABI provides _Alignof (max_align_t) only.)
This patch adds the new UDP_ENCAP_GTP0 and UDP_ENCAP_GTP1U from Linux
4.7 to sysdeps/gnu/netinet/udp.h.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* sysdeps/gnu/netinet/udp.h (UDP_ENCAP_GTP0): New macro.
(UDP_ENCAP_GTP1U): Likewise.
This patch adds the new PF_QIPCRTR and AF_QIPCRTR from Linux 4.7 to
sysdeps/unix/sysv/linux/bits/socket.h.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* sysdeps/unix/sysv/linux/bits/socket.h (PF_QIPCRTR): New macro.
(PF_MAX): Update value.
(AF_QIPCRTR): New macro.
sparc64 passes floating point values in the floating point registers.
As the the generic ceil, floor and trunc functions use integer
instructions, it makes sense to provide a VIS3 version consisting in
the the generic version compiled with -mvis3. GCC will then use
movdtox, movxtod, movwtos and movstow instructions.
sparc32 passes the floating point values in the integer registers, so it
doesn't make sense to do the same.
Changelog:
* sysdeps/ieee754/dbl-64/s_trunc.c: Avoid alias renamed.
* sysdeps/ieee754/dbl-64/wordsize-64/s_trunc.c: Likewise.
* sysdeps/ieee754/flt-32/s_truncf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile
[$(subdir) = math && $(have-as-vis3) = yes] (libm-sysdep_routines):
Add s_ceilf-vis3, s_ceil-vis3, s_floorf-vis3, s_floor-vis3,
s_truncf-vis3, s_trunc-vis3.
(CFLAGS-s_ceilf-vis3.c): New. Set to -Wa,-Av9d -mvis3.
(CFLAGS-s_ceil-vis3.c): Likewise.
(CFLAGS-s_floorf-vis3.c): Likewise.
(CFLAGS-s_floor-vis3.c): Likewise.
(CFLAGS-s_truncf-vis3.c): Likewise.
(CFLAGS-s_trunc-vis3.c): Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil-vis3.c: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf-vis3.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor-vis3.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf-vis3.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc-vis3.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf-vis3.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf.c: Likewise.
As pointer out on the mailing list, the inline assembly code in
sysdeps/powerpc/ifunc-sel.h doesn't have a list of clobbered registers
and used wrong constraints.
This patch fixes that. I verified it doesn't introduce any change in the
generated code.
Changelog:
* sysdeps/powerpc/ifunc-sel.h (ifunc_sel): Add "11", "12", "cr0" to the
clobber list. Use "i" constraint instead of "X".
(ifunc_one): Add "12" to the clobber list. Use "i" constraint instead
of "X".
On 32-bit PowerPC GCC 6 always saves the PIC register on the stack in
the prologue and adjust the stack in the epilogue. It is therefore not
possible anymore to just exit the function in the inline asm code,
otherwise it corrupts the stack pointer. This causes the following tests
to fail when using GCC 6:
FAIL: elf/ifuncmain1
FAIL: elf/ifuncmain1pic
FAIL: elf/ifuncmain1picstatic
FAIL: elf/ifuncmain1pie
FAIL: elf/ifuncmain1staticpic
FAIL: elf/ifuncmain1staticpie
FAIL: elf/ifuncmain1vis
FAIL: elf/ifuncmain1vispic
FAIL: elf/ifuncmain1vispie
FAIL: elf/ifuncmain2pic
FAIL: elf/ifuncmain2picstatic
FAIL: elf/ifuncmain3
FAIL: elf/ifuncmain4picstatic
FAIL: elf/ifuncmain5
FAIL: elf/ifuncmain5picstatic
FAIL: elf/ifuncmain5staticpic
The solution is to replace the beqlr instructions by a beq to the end
of the inline asm code. This fixes all the above failures.
ChangeLog:
* sysdeps/powerpc/ifunc-sel.h (ifunc_sel): Replace beqlr instructions
by beq instructions jumping to the end of the function.
This patch implements support for the __STDC_WANT_LIB_EXT2__ feature
test macro from ISO/IEC TR 24731-2:2010, thereby implementing one
possible approach for supporting ISO C feature test macros.
Recall that, as described in
<https://sourceware.org/ml/libc-alpha/2016-05/msg00486.html>, these
macros work based on the definition when affected headers are
included, so cannot be handled once when the first system header is
included because that might not be one of the headers the particular
macro in question affects.
<https://sourceware.org/ml/libc-alpha/2016-05/msg00680.html> expresses
views on possible approaches for implementation and
<https://sourceware.org/ml/libc-alpha/2016-06/msg00039.html> follows
up on that.
This patch arranges things so that the relevant condition is
__GLIBC_USE (LIB_EXT2), following one of the suggestions given.
Headers using these macros include <bits/libc-header-start.h>, which
in turn includes <features.h>. Headers must define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION before including
<bits/libc-header-start.h>, to discourage inclusion outside glibc as
requested. __USE_GNU conditions on affected functions are changed to
__GLIBC_USE (LIB_EXT2), while it's added as an additional alternative
on the conditions for functions already enabled for some POSIX
versions.
It would be possible to convert existing __USE_* conditionals to
__GLIBC_USE (with the relevant __GLIBC_USE_* being defined in
<features.h> where __USE_* are presently defined), and so make them
typo-proof (given -Wundef -Werror in glibc builds) because __GLIBC_USE
is used with #if not #ifdef / #if defined.
No attempt is made to enforce the rule about diagnosing different
definitions of __STDC_WANT_LIB_EXT2__ when affected headers are
included; such a diagnostic is incompatible with multiple-include
guards on the affected headers, unless compiler extensions are added
to support it.
As previously noted, glibc does not implement all features from TR
24731-2:2010: the functions aswprintf vaswprintf getwdelim getwline
are not in glibc, although they would be appropriate to add if someone
wished to do so. But I think it makes sense to support the feature
test macro if *any* of the controlled features are present in glibc.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* bits/libc-header-start.h: New file.
* Makefile (headers): Add bits/libc-header-start.h.
* include/features.h (__STDC_WANT_LIB_EXT2__): Document.
(__GLIBC_USE): New macro.
* libio/stdio.h: Define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
<bits/libc-header-start.h> instead of including <features.h>.
(fmemopen): Declare also if [__GLIBC_USE (LIB_EXT2)].
(open_memstream): Likewise.
(vasprintf): Declare if [__GLIBC_USE (LIB_EXT2)], not [__USE_GNU].
(__asprintf): Likewise.
(asprintf): Likewise.
(__getdelim): Declare also if [__GLIBC_USE (LIB_EXT2)].
(getdelim): Likewise.
(getline): Likewise.
* string/string.h: Define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
<bits/libc-header-start.h> instead of including <features.h>.
(strdup): Declare also if [__GLIBC_USE (LIB_EXT2)]
(strndup): Likewise.
* wcsmbs/wchar.h: Define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
<bits/libc-header-start.h> instead of including <features.h>.
(open_wmemstream): Declare also if [__GLIBC_USE (LIB_EXT2)].
* manual/creature.texi (__STDC_WANT_LIB_EXT2__): Document macro.
It is necessary to preserve the invariant that if an arena is
on the free list, it has thread attach count zero. Otherwise,
when arena_thread_freeres sees the zero attach count, it will
add it, and without the invariant, an arena could get pushed
to the list twice, resulting in a cycle.
One possible execution trace looks like this:
Thread 1 examines free list and observes it as empty.
Thread 2 exits and adds its arena to the free list,
with attached_threads == 0).
Thread 1 selects this arena in reused_arena (not from the free list).
Thread 1 increments attached_threads and attaches itself.
(The arena remains on the free list.)
Thread 1 exits, decrements attached_threads,
and adds the arena to the free list.
The final step creates a cycle in the usual way (by overwriting the
next_free member with the former list head, while there is another
list item pointing to the arena structure).
tst-malloc-thread-exit exhibits this issue, but it was only visible
with a debugger because the incorrect fix in bug 19243 removed
the assert from get_free_list.
The alpha specific version of trunc and truncf always add and subtract
0x1.0p23 or 0x1.0p52 even for big values. This causes this kind of
errors in the testsuite:
Failure: Test: trunc_towardzero (0x1p107)
Result:
is: 1.6225927682921334e+32 0x1.fffffffffffffp+106
should be: 1.6225927682921336e+32 0x1.0000000000000p+107
difference: 1.8014398509481984e+16 0x1.0000000000000p+54
ulp : 0.5000
max.ulp : 0.0000
Change this by returning the input value when its absolute value is
greater than 0x1.0p23 or 0x1.0p52. NaN have to go through the add and
subtract operations to get possibly silenced.
Finally remove the code to handle inexact exception, trunc should never
generate such an exception.
Changelog:
* sysdeps/alpha/fpu/s_trunc.c (__trunc): Return the input value
when its absolute value is greater than 0x1.0p52.
[_IEEE_FP_INEXACT] Remove.
* sysdeps/alpha/fpu/s_truncf.c (__truncf): Return the input value
when its absolute value is greater than 0x1.0p23.
[_IEEE_FP_INEXACT] Remove.
The alpha version of rint wrongly return sNaN for sNaN input. Fix that
by checking for NaN and by returning the input value added with itself
in that case.
Changelog:
* sysdeps/alpha/fpu/s_rint.c (__rint): Add argument with itself
when it is a NaN.
* sysdeps/alpha/fpu/s_rintf.c (__rintf): Likewise.
The alpha version of floor wrongly return sNaN for sNaN input. Fix that
by checking for NaN and by returning the input value added with itself
in that case.
Finally remove the code to handle inexact exception, floor should never
generate such an exception.
Changelog:
* sysdeps/alpha/fpu/s_floor.c (__floor): Add argument with itself
when it is a NaN.
[_IEEE_FP_INEXACT] Remove.
* sysdeps/alpha/fpu/s_floorf.c (__floorf): Likewise.
The alpha version of ceil wrongly return sNaN for sNaN input. Fix that
by checking for NaN and by returning the input value added with itself
in that case.
Finally remove the code to handle inexact exception, ceil should never
generate such an exception.
Changelog:
* sysdeps/alpha/fpu/s_ceil.c (__ceil): Add argument with itself
when it is a NaN.
[_IEEE_FP_INEXACT] Remove.
* sysdeps/alpha/fpu/s_ceilf.c (__ceilf): Likewise.
The ceil, floor and trunc functions on sparc do not fully follow the
standard and trigger an inexact exception when presented a value which
is not an integer. Since glibc 2.24 this causes a few tests to fail,
for instance:
testing double (without inline functions)
Failure: ceil (lit_pi): Exception "Inexact" set
Failure: ceil (-lit_pi): Exception "Inexact" set
Failure: ceil (min_subnorm_value): Exception "Inexact" set
Failure: ceil (min_value): Exception "Inexact" set
Failure: ceil (0.1): Exception "Inexact" set
Failure: ceil (0.25): Exception "Inexact" set
Failure: ceil (0.625): Exception "Inexact" set
Failure: ceil (-min_subnorm_value): Exception "Inexact" set
Failure: ceil (-min_value): Exception "Inexact" set
Failure: ceil (-0.1): Exception "Inexact" set
Failure: ceil (-0.25): Exception "Inexact" set
Failure: ceil (-0.625): Exception "Inexact" set
I tried to fix that by using the same strategy than used on other
architectures, that is by saving the FSR register at the beginning
and restoring it at the end of the function. When doing so I noticed
a comment that this operation might be very costly, so I decided to
do some benchmarks.
The benchmarks below represent the time required to run each of the
function 60 millions of times with different input value. I have done
that in the basic V9 code, the VIS2 code, and using the default C
implementation of the libc, for both sparc32 and sparc64, on a Niagara
T1 based machine and an UltraSparc IIIi. Given I don't have access to a
more recent machine), I haven't been able to test the VIS3 version. Also
it should be noted that it doesn't make sense to do this benchmark for
V8 or earlier as in that case we use the default C implementation. The
results are available in the table below, the "+ fix" version correspond
to the one saving and restoring the FSR.
Niagara T1 / sparc32
--------------------
ceilf ceil floorf floor truncf trunc
V9 19.10 22.48 19.10 22.48 16.59 19.27
V9 + fix 19.77 23.34 19.77 23.33 17.27 20.12
VIS2 16.87 19.62 16.87 19.62
VIS2 + fix 17.55 20.47 17.55 20.47
C impl 11.39 13.80 11.40 13.80 10.88 10.84
Niagara T1 / sparc64
--------------------
ceilf ceil floorf floor truncf trunc
V9 18.14 22.23 18.14 22.23 15.64 19.02
V9 + fix 18.82 23.08 18.82 23.08 16.32 19.87
VIS2 15.92 19.37 15.92 19.37
VIS2 + fix 16.59 20.22 16.59 20.22
C impl 11.39 13.60 11.39 15.36 10.88 12.65
UltraSparc IIIi / sparc32
-------------------------
ceilf ceil floorf floor truncf trunc
V9 4.81 7.09 6.61 11.64 4.91 7.05
V9 + fix 7.20 10.42 7.14 10.54 6.76 9.47
VIS2 4.81 7.03 4.76 7.13
VIS2 + fix 6.76 9.51 6.71 9.63
C impl 3.88 8.62 3.90 9.45 3.57 6.62
UltraSparc IIIi / sparc64
-------------------------
ceilf ceil floorf floor truncf trunc
V9 3.48 4.39 3.48 4.41 3.01 3.85
V9 + fix 4.76 5.90 4.76 5.90 4.86 6.26
VIS2 2.95 3.61 2.95 3.61
VIS2 + fix 4.24 5.37 4.30 7.97
C impl 3.63 4.89 3.62 6.38 3.33 4.03
The first thing that should be noted is that the C implementation is
always faster on the Niagara T1 based machine. On the UltraSparc IIIi
the float version on sparc32 is also faster.
Coming back about the fix saving and restoring the FSR, it appears
it has a big impact as expected. In that case the C implementation is
always faster than the fixed implementations.
This patch therefore removes the sparc specific implementations in
favor of the generic ones.
Changelog:
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile
[$(subdir) = math] (libm-sysdep_routines): Remove.
[$(subdir) = math && $(have-as-vis3) = yes] (libm-sysdep_routines):
Remove s_ceilf-vis3, s_ceil-vis3, s_floorf-vis3, s_floor-vis3,
s_truncf-vis3, s_trunc-vis3.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceil-vis2.S: Delete
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceil-vis3.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceil.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceilf-vis2.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceilf-vis3.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceilf.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floor-vis2.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floor-vis3.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floor.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floorf-vis2.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floorf-vis3.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floorf.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_trunc-vis3.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_trunc.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_truncf-vis3.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_truncf.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_ceil.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_ceilf.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_floor.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_floorf.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_trunc.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_truncf.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil-vis2.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil-vis3.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf-vis2.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf-vis3.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor-vis2.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor-vis3.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf-vis2.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf-vis3.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc-vis3.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf-vis3.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf.S: Likewise.
* sysdeps/sparc/sparc64/fpu/s_ceil.S: Likewise.
* sysdeps/sparc/sparc64/fpu/s_ceilf.S: Likewise.
* sysdeps/sparc/sparc64/fpu/s_floor.S: Likewise.
* sysdeps/sparc/sparc64/fpu/s_floorf.S: Likewise.
* sysdeps/sparc/sparc64/fpu/s_trunc.S: Likewise.
* sysdeps/sparc/sparc64/fpu/s_truncf.S: Likewise.
Don't compile do_test with -mavx, -mavx nor -mavx512 since they won't run
on non-AVX machines.
[BZ #20384]
* sysdeps/x86_64/fpu/Makefile (extra-test-objs): Add
test-double-libmvec-sincos-avx-main.o,
test-double-libmvec-sincos-avx2-main.o,
test-double-libmvec-sincos-main.o,
test-float-libmvec-sincosf-avx-main.o,
test-float-libmvec-sincosf-avx2-main.o and
test-float-libmvec-sincosf-main.o.
test-float-libmvec-sincosf-avx512-main.o.
($(objpfx)test-double-libmvec-sincos): Also link with
$(objpfx)test-double-libmvec-sincos-main.o.
($(objpfx)test-double-libmvec-sincos-avx): Also link with
$(objpfx)test-double-libmvec-sincos-avx-main.o.
($(objpfx)test-double-libmvec-sincos-avx2): Also link with
$(objpfx)test-double-libmvec-sincos-avx2-main.o.
($(objpfx)test-float-libmvec-sincosf): Also link with
$(objpfx)test-float-libmvec-sincosf-main.o.
($(objpfx)test-float-libmvec-sincosf-avx): Also link with
$(objpfx)test-float-libmvec-sincosf-avx2-main.o.
[$(config-cflags-avx512) == yes] (extra-test-objs): Add
test-double-libmvec-sincos-avx512-main.o and
($(objpfx)test-double-libmvec-sincos-avx512): Also link with
$(objpfx)test-double-libmvec-sincos-avx512-main.o.
($(objpfx)test-float-libmvec-sincosf-avx512): Also link with
$(objpfx)test-float-libmvec-sincosf-avx512-main.o.
(CFLAGS-test-double-libmvec-sincos.c): Removed.
(CFLAGS-test-float-libmvec-sincosf.c): Likewise.
(CFLAGS-test-double-libmvec-sincos-main.c): New.
(CFLAGS-test-double-libmvec-sincos-avx-main.c): Likewise.
(CFLAGS-test-double-libmvec-sincos-avx2-main.c): Likewise.
(CFLAGS-test-float-libmvec-sincosf-main.c): Likewise.
(CFLAGS-test-float-libmvec-sincosf-avx-main.c): Likewise.
(CFLAGS-test-float-libmvec-sincosf-avx2-main.c): Likewise.
(CFLAGS-test-float-libmvec-sincosf-avx512-main.c): Likewise.
(CFLAGS-test-double-libmvec-sincos-avx.c): Set to -DREQUIRE_AVX.
(CFLAGS-test-float-libmvec-sincosf-avx.c ): Likewise.
(CFLAGS-test-double-libmvec-sincos-avx2.c): Set to
-DREQUIRE_AVX2.
(CFLAGS-test-float-libmvec-sincosf-avx2.c ): Likewise.
(CFLAGS-test-double-libmvec-sincos-avx512.c): Set to
-DREQUIRE_AVX512F.
(CFLAGS-test-float-libmvec-sincosf-avx512.c): Likewise.
* sysdeps/x86_64/fpu/test-double-libmvec-sincos.c: Rewritten.
* sysdeps/x86_64/fpu/test-float-libmvec-sincosf.c: Likewise.
* sysdeps/x86_64/fpu/test-double-libmvec-sincos-avx-main.c: New
file.
* sysdeps/x86_64/fpu/test-double-libmvec-sincos-avx2-main.c:
Likewise.
* sysdeps/x86_64/fpu/test-double-libmvec-sincos-avx512-main.c:
Likewise.
* sysdeps/x86_64/fpu/test-double-libmvec-sincos-main.c:
Likewise.
* sysdeps/x86_64/fpu/test-float-libmvec-sincosf-avx-main.c:
Likewise.
* sysdeps/x86_64/fpu/test-float-libmvec-sincosf-avx2-main.c:
Likewise.
* sysdeps/x86_64/fpu/test-float-libmvec-sincosf-avx512-main.c:
Likewise.
* sysdeps/x86_64/fpu/test-float-libmvec-sincosf-main.c:
Likewise.
This partly reverts commit f8238ae3c7
that regenerated the ulps, to make the max ulps good for gcc-5,
gcc-6 and gcc-trunk as well.
* sysdeps/aarch64/libm-test-ulps: Updated.
If the default memcpy variant is called with a length of >1MB on 31bit,
r13 is clobbered as the algorithm is switching to mvcle. The mvcle code
returns without restoring r13. All other cases are restoring r13.
If memcpy is called from outside libc the ifunc resolver will only select
this variant if running on machines older than z10.
Otherwise or if memcpy is called from inside libc, this default memcpy
variant is called.
The testcase timezone/tst-tzset is triggering this issue in some combinations
of gcc versions and optimization levels.
This bug was introduced in commit 04bb21ac93
and thus is a regression compared to former glibc 2.23 release.
This patch removes the usage of r13 at all. Thus it is not saved and restored.
The base address for execute-instruction is now stored in r5 which is obtained
after r5 is not needed anymore as 256byte block counter.
ChangeLog:
* sysdeps/s390/s390-32/memcpy.S (memcpy): Eliminate the usage
of r13 as it is not restored in mvcle case.
If a function passes in a variable named "ret", the code will miscompile
when it declares a local ret variable. In some cases, it's even a build
failure like so:
../sysdeps/unix/sysv/linux/spawni.c: In function '__spawni_child':
../sysdeps/unix/sysv/linux/spawni.c:289:5: error: address of register variable 'ret' requested
while (write_not_cancel (p, &ret, sizeof ret) < 0)
Compile i386 rtld-*.os with -mno-sse -mno-mmx -mfpmath=387 so that no
code in ld.so uses mm/xmm/ymm/zmm registers on i386 since the first 3
mm/xmm/ymm/zmm registers are used to pass vector parameters which must
be preserved.
* sysdeps/i386/Makefile (rtld-CFLAGS): New.
[subdir == elf] (CFLAGS-.os): Replace -mno-sse -mno-mmx
-mfpmath=387 with $(rtld-CFLAGS).
[subdir != elf] (CFLAGS-.os): Compile rtld-*.os with
$(rtld-CFLAGS).
During the sincos consolidation I made two mistakes, one was a logical
error due to which cos(0x1.8475e5afd4481p+0) returned
sin(0x1.8475e5afd4481p+0) instead.
The second issue was an error in negating inputs for the correct
quadrants for sine. I could not find a suitable test case for this
despite running a program to search for such an input for a couple of
hours.
Following patch fixes both issues. Tested on x86_64. Thanks to Matt
Clay for identifying the issue.
[BZ #20357]
* sysdeps/ieee754/dbl-64/s_sin.c (sloww): Fix up condition
to call __mpsin/__mpcos and to negate values.
* math/auto-libm-test-in: Add test.
* math/auto-libm-test-out: Regenerate.
grp-merge.h was introduced in Stephen Gallagher's patch adding the
"group merging" feature to NSS. It declares two functions, __copy_grp
and __merge_grp, both of which are tagged 'internal_function', which
means that nobody can even compile the contents of the header without
access to libc-symbols.h, which is not installed. (Also, these
functions are GLIBC_PRIVATE exports from libc.so.) Hence I believe
grp-merge.h should not be installed either.
This really needs to be in 2.24, so that no released version of the
library installs this header.
I hope that what I did to the ChangeLog diff will allow it to be
applied without hassle.
* grp/Makefile: Don't install the internal header grp-merge.h.
This patch changes both the nptl and libc Linux raise implementation
to avoid the issues described in BZ#15368. The strategy used is
summarized in bug report first comment:
1. Block all signals (including internal NPTL ones);
2. Get pid and tid directly from syscall (not relying on cached
values);
3. Call tgkill;
4. Restore old signal mask.
Tested on x86_64 and i686.
[BZ #15368]
* sysdeps/unix/sysv/linux/nptl-signals.h
(__nptl_clear_internal_signals): New function.
(__libc_signal_block_all): Likewise.
(__libc_signal_block_app): Likewise.
(__libc_signal_restore_set): Likewise.
* sysdeps/unix/sysv/linux/pt-raise.c (raise): Use Linux raise.c
implementation.
* sysdeps/unix/sysv/linux/raise.c (raise): Reimplement to not use
the cached pid/tid value in pthread structure.
64-bit off_t in pread64, preadv, pwrite64 and pwritev syscalls is passed
in one 64-bit register for both x32 and x86-64. Since the inline
asm statement only passes long, which is 32-bit for x32, in registers,
64-bit off_t is truncated to 32-bit on x32. Since __ASSUME_PREADV and
__ASSUME_PWRITEV are defined unconditionally, these syscalls can be
implemented in syscalls.list to pass 64-bit off_t in one 64-bit register.
Tested on x86-64 and x32 with off_t > 4GB on pread64/pwrite64 and
preadv64/pwritev64.
[BZ #20348]
* sysdeps/unix/sysv/linux/x86_64/syscalls.list: Add pread64,
preadv64, pwrite64 and pwritev64.
Test p{read,write}64 with offset > 4GB. Since it is not an error for a
successful pread/pwrite call to transfer fewer bytes than requested, we
should check if the return value is -1. No need to close and unlink
temporary file, which is handled by test-skeleton.c.
[BZ #20350]
* posix/tst-preadwrite.c: Renamed to ...
* posix/tst-preadwrite-common.c: This.
(PREAD): Removed.
(PWRITE): Likewise.
(STRINGIFY): Likewise.
(STRINGIFY2): Likewise.
(do_prepare): Make it static and remove function arguments.
(do_test): Likewise.
(PREPARE): Updated.
(TEST_FUNCTION): New.
(name): Make it static.
(fd): Likewise.
(do_prepare): Use create_temp_file.
(do_test): Renamed to ...
(do_test_with_offset): This. Make it static and accept offset.
Properly check return value of PWRITE and PREAD. Return bytes
read. Don't close fd nor unlink name.
* posix/tst-preadwrite.c: Rewrite.
* posix/tst-preadwrite64.c: Likewise.
Since _dl_tlsdesc_dynamic is called via PLT, we need to add 8 bytes for
push in the PLT entry to align the stack.
[BZ #20309]
* configure.ac (have-mtls-dialect-gnu2): Set to yes if
-mtls-dialect=gnu2 works.
* configure: Regenerated.
* elf/Makefile [have-mtls-dialect-gnu2 = yes]
(tests): Add tst-gnu2-tls1.
(modules-names): Add tst-gnu2-tls1mod.
($(objpfx)tst-gnu2-tls1): New.
(tst-gnu2-tls1mod.so-no-z-defs): Likewise.
(CFLAGS-tst-gnu2-tls1mod.c): Likewise.
* elf/tst-gnu2-tls1.c: New file.
* elf/tst-gnu2-tls1mod.c: Likewise.
* sysdeps/x86_64/dl-tlsdesc.S (_dl_tlsdesc_dynamic): Add 8
bytes for push in the PLT entry to align the stack.
Define LO_HI_LONG to skip pos_h since it is ignored by kernel:
static inline loff_t pos_from_hilo(unsigned long high, unsigned long low)
{
#define HALF_LONG_BITS (BITS_PER_LONG / 2)
return (((loff_t)high << HALF_LONG_BITS) << HALF_LONG_BITS) | low;
}
where size of loff_t == size of long.
[BZ #20349]
* sysdeps/unix/sysv/linux/x86_64/sysdep.h (LO_HI_LONG): New.
This reverts commit 62ce266b0b.
The change is not mature enough because it needs the following fixes:
1. Redirect test output to a file like other tests
2. Eliminate the need to use a .gdbinit because distributions will
break without it. I should have caught that but I was in too much
of a hurry to get the patch in :/
3. Feature checking during configure to determine things like minimum
required gdb version, python-pexpect version, etc. to make sure
that tests work correctly.
When glibc is built with --enable-profile, the ENTRY of
asm functions includes CALL_MCOUNT for profiling.
(matters for binaries static linked against libc_p.a.)
CALL_MCOUNT did not save/restore argument registers
around the _mcount call so it clobbered them.
(it is enough to only save/restore the arguments passed
to a given asm function, but that would be too many asm
changes so it is simpler to always save all argument
registers in this macro.)
float args are not saved: mcount does not clobber the
float regs and currently no asm function takes float
arguments anyway.
[BZ #18707]
* sysdeps/aarch64/Makefile (CFLAGS-mcount.c): Add -mgeneral-regs-only.
* sysdeps/aarch64/sysdep.h (CALL_MCOUNT): Save argument registers.
The p{read,write}v{64} consolidation patch [1] added a wrong guard
for LO_HI_LONG definition. It currently uses both
'__WORDSIZE == 64' and 'defined __ASSUME_WORDSIZE64_ILP32' to set
the value to be passed in one argument, otherwise it will be split
in two.
However it fails on MIPS64n32 where syscalls n32 uses the compat
implementation in the kernel meaning the off_t arguments are passed
in two separate registers.
GLIBC already defines a macro for such cases (__OFF_T_MATCHES_OFF64_T),
so this patch uses it instead.
Checked on x86_64, i686, x32, aarch64, armhf, and s390.
* sysdeps/unix/sysv/linux/sysdep.h
[__WORDSIZE == 64 || __ASSUME_WORDSIZE64_ILP32] (LO_HI_LONG): Remove
guards.
* misc/tst-preadvwritev-common.c: New file.
* misc/tst-preadvwritev.c: Use tst-preadvwritev-common.c.
* misc/tst-preadvwritev64.c: Use tst-preadwritev-common.c and add
a check for files larger than 2GB.
[1] 4751bbe2ad
This patch removes the __ASSUME_OFF_DIFF_OFF64 define introduced in
p{read,write} consolidation patch. This define was added based on
the idea 32 bits ports would continue to follow previous off{64}_t
definition where off_t size differs from off64_t one.
However, with recent AArch64/ILP32 patch submission and also with
discussion for RISCV kernel interface, 32 bits ports now may aim
to use off_t and off64_t with the same size as 64 bits.
So current assumption for both p{read,write} and p{read,write}v
are not compatible with new type definition. This patch now makes
the syscall wrappers to only depend on __OFF_T_MATCHES_OFF64_T to
define the default and 64-suffix variant, as follow:
<function>.c
#ifndef __OFF_T_MATCHES_OFF64_T
/* build <function> */
#endif
and
<function>64.c
/* build <function>64 */
#ifdef __OFF_T_MATCHES_OFF64_T
weak_alias (fallocate64, fallocate)
#endif
Tested on x86_64, i686, x32, and armhf.
* sysdeps/unix/sysv/linux/mips/kernel-features.h
(__ASSUME_OFF_DIFF_OFF64): Remove define.
* sysdeps/unix/sysv/linux/pread.c
[__WORDSIZE != 64 || __ASSUME_OFF_DIFF_OFF64] (pread): Replace by
__OFF_T_MATCHES_OFF64_T.
* sysdeps/unix/sysv/linux/pread64.c
[__WORDSIZE != 64 || __ASSUME_OFF_DIFF_OFF64] (pread64): Likewise.
* sysdeps/unix/sysv/linux/preadv.c
[__WORDSIZE != 64 || __ASSUME_OFF_DIFF_OFF64] (preadv): Likewise.
* sysdeps/unix/sysv/linux/preadv64.c
[__WORDSIZE != 64 || __ASSUME_OFF_DIFF_OFF64] (preadv64): Likewise.
* sysdeps/unix/sysv/linux/pwrite.c
[__WORDSIZE != 64 || __ASSUME_OFF_DIFF_OFF64] (pwrite): Likewise.
* sysdeps/unix/sysv/linux/pwrite64.c
[__WORDSIZE != 64 || __ASSUME_OFF_DIFF_OFF64] (pwrite64): Likewise.
* sysdeps/unix/sysv/linux/pwritev.c
[__WORDSIZE != 64 || __ASSUME_OFF_DIFF_OFF64] (pwritev): Likewise.
* sysdeps/unix/sysv/linux/pwritev64.c
[__WORDSIZE != 64 || __ASSUME_OFF_DIFF_OFF64] (pwritev64): Likewise.
This patch adds pretty printers for the following NPTL types:
- pthread_mutex_t
- pthread_mutexattr_t
- pthread_cond_t
- pthread_condattr_t
- pthread_rwlock_t
- pthread_rwlockattr_t
To load the pretty printers into your gdb session, do the following:
python
import sys
sys.path.insert(0, '/path/to/glibc/build/nptl/pretty-printers')
end
source /path/to/glibc/source/pretty-printers/nptl-printers.py
You can check which printers are registered and enabled by issuing the
'info pretty-printer' gdb command. Printers should trigger automatically when
trying to print a variable of one of the types mentioned above.
The printers are architecture-independent, and were manually tested on both
the gdb CLI and Eclipse CDT.
In order to work, the printers need to know the values of various flags that
are scattered throughout pthread.h and pthreadP.h as enums and #defines. Since
replicating these constants in the printers file itself would create a
maintenance burden, I wrote a script called gen-py-const.awk that Makerules uses
to extract the constants. This script is pretty much the same as gen-as-const.awk,
except it doesn't cast the constant values to 'long' and is thorougly documented.
The constants need only to be enumerated in a .pysym file, which is then referenced
by a Make variable called gen-py-const-headers.
As for the install directory, I discussed this with Mike Frysinger and Siddhesh
Poyarekar, and we agreed that it can be handled in a separate patch, and it shouldn't
block merging of this one.
In addition, I've written a series of test cases for the pretty printers.
Each lock type (mutex, condvar and rwlock) has two test programs, one for itself
and other for its related 'attributes' object. Each test program in turn has a
PExpect-based Python script that drives gdb and compares its output to the
expected printer's. The tests run on the glibc host, which is assumed to have
both gdb and PExpect; if either is absent the tests will fail with code 77
(UNSUPPORTED). For cross-testing you should use cross-test-ssh.sh as test-wrapper.
I've tested the printers on both a native build and a cross build using a Beaglebone
Black, with the build system's filesystem shared with the board through NFS.
Finally, I've written a README that explains all this and more.
Hopefully this should be good to go in now. Thanks.
ChangeLog:
2016-07-04 Martin Galvan <martin.galvan@tallertechnologies.com>
* Makeconfig (build-hardcoded-path-in-tests): Set to 'yes' for shared builds
if tests-need-hardcoded-path is defined.
(all-subdirs): Add pretty-printers.
* Makerules ($(py-const)): New rule.
* Rules (others): Add $(py-const), if defined.
* nptl/Makefile (gen-py-const-headers): Define.
* nptl/nptl-printers.py: New file.
* nptl/nptl_lock_constants.pysym: Likewise.
* pretty-printers/Makefile: Likewise.
* pretty-printers/README: Likewise.
* pretty-printers/test-condvar-attributes.c: Likewise.
* pretty-printers/test-condvar-attributes.p: Likewise.
* pretty-printers/test-condvar-printer.c: Likewise.
* pretty-printers/test-condvar-printer.py: Likewise.
* pretty-printers/test-mutex-attributes.c: Likewise.
* pretty-printers/test-mutex-attributes.py: Likewise.
* pretty-printers/test-mutex-printer.c: Likewise.
* pretty-printers/test-mutex-printer.py: Likewise.
* pretty-printers/test-rwlock-attributes.c: Likewise.
* pretty-printers/test-rwlock-attributes.py: Likewise.
* pretty-printers/test-rwlock-printer.c: Likewise.
* pretty-printers/test-rwlock-printer.py: Likewise.
* pretty-printers/test_common.py: Likewise.
* scripts/gen-py-const.awk: Likewise.
The previous uses of this symbol were all in wordsize-32 code.
In commit eeddfa91cb ("Consolidate off_t/off64_t syscall
argument passing") it was expanded to be used in pread/pwrite.
Accordingly, we only define it in 32-bit compilation modes now.
Both tilepro and tilegx32 follow this convention for the
kernel ABI. tilegx64 follows it for passing 128-bit values,
but there are no such ABIs in the kernel.
Commit 1c1e7fb6 changed the __USE_KERNEL_IPV6_DEFS tests from 'ifdef'
to 'if'. As inet/netinet.in.h is a generic file, this causes a warning
on non-Linux kernels (for example Hurd). To fix that define it in the
generic bits/in.h file.
Changelog:
* bits/in.h (__USE_KERNEL_IPV6_DEFS): Define to 0.
Commit a6a4395d fixed modf implementation by compiling s_modf.c and
s_modff.c with -fsignaling-nans. However these files are also included
from the pre-POWER5+ implementation, and thus these files should also
be compiled with -fsignaling-nans.
Changelog:
[BZ #20240]
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/Makefile
(CFLAGS-s_modf-ppc32.c): New variable.
(CFLAGS-s_modff-ppc32.c): Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile
(CFLAGS-s_modf-ppc64.c): Likewise.
(CFLAGS-s_modff-ppc64.c): Likewise.
In Linux/ARM environment, a robust mutex can't catch the timeout result
when it is already owned by other thread and requests to try lock with
a specific time value(pthread_mutex_timedlock). The futex already returns
the ETIMEDOUT result but there is no check the return value and it makes
a deadlock.
* nptl/lowlevelrobustlock.c: Implement ETIMEDOUT logic.
On s390, the current prelink undo code in elf_machine_lazy_rel()
has the requirement, that the plt stubs use the first got slots
after the 3 reserved ones.
In case of undoing prelink, the plt got slots are reset to the correct
addresses whithin the corresponding plt-stub. Therefore the address
is calculated by the address of the first plt-stub-address which
was written by prelink (see l->l_mach.plt) to got[1] and index of
current relocation multiplied with 32 (=size of one plt slot).
The index was calculated with ¤t-got-slot - &got[3].
This patch removes the requirement, that the plt-got-slots are
starting at got[3]. The index is now calculated with
¤t-reloc - &reloc[0]. The first struct Elf64_Rela is stored
at DT_JMPREL.
This patch is needed to prepare for partial relro support.
Ulrich Weigand suggested this approach to use DT_JMPREL - Thanks.
ChangeLog:
* sysdeps/s390/linkmap.h (struct link_map_machine):
Remove member gotplt and add member jmprel.
* sysdeps/s390/s390-32/dl-machine.h
(elf_machine_runtime_setup): Setup member jmprel with DT_JMPREL
instead of gotplt with &got[3].
(elf_machine_lazy_rel): Calculate address with reloc and jmprel.
* sysdeps/s390/s390-64/dl-machine.h: Likewise.
* libio/iofopncook.c (_IO_cookie_read, _IO_cookie_write,
_IO_cookie_seek, _IO_cookie_close, _IO_old_cookie_seek)
[!PTR_DEMANGLE]: Do not call PTR_DEMANGLE.
(set_callbacks) [!PTR_MANGLE]: Do not call PTR_MANGLE.
* libio/vtables.c (_IO_vtable_check)
[!PTR_DEMANGLE]: Do not call PTR_DEMANGLE.
* libio/libioP.h (IO_set_accept_foreign_vtables)
[!PTR_MANGLE]: Do not call PTR_MANGLE.
If C++ headers <cstdlib> or <cmath> are used, GCC 6 will include
/usr/include/stdlib.h or /usr/include/math.h from "#include_next"
(instead of stdlib/stdlib.h or math/math.h in the glibc source
directory), and this turns up as a make dependency. An implicit
rule will kick in and make will try to install stdlib/stdlib.h or
math/math.h as /usr/include/stdlib.h or /usr/include/math.h because
the target is out of date. We make a copy of <cstdlib> and <cmath>
in the glibc build directory so that stdlib/stdlib.h and math/math.h
will be used instead of /usr/include/stdlib.h and /usr/include/math.h.
[BZ #20314]
* Makeconfig (CXXFLAGS): Prepend -I$(common-objpfx).
* Makerules (before-compile): Add $(common-objpfx)cstdlib and
$(common-objpfx)cmath.
($(common-objpfx)cstdlib): New target.
($(common-objpfx)cmath): Likewise.
