The implementation of memcmp for s390-32 (31bit) and
s390-64 (64bit) is nearly the same.
This patch unifies it for maintability reasons.
__memcmp_z10 and __memcmp_z196 differs between 31 and 64bit:
-31bit needs .machinemode "zarch_nohighgprs" and llgfr %r4,%r4
-lr vs lgr and some other instructions:
But lgr and co can be also used on 31bit as this ifunc variant
is only called if we are on a zarch machine.
__memcmp_default differs between 31 and 64bit:
-Some 31bit vs 64bit instructions (e.g. ltr vs ltgr.
Solved with 31/64 specific instruction macros).
-The address of mvc instruction is setup in different ways
(larl vs bras). Solved with #if defined __s390x__.
Otherwise 31/64bit implementation has the same structure of the code.
ChangeLog:
* sysdeps/s390/s390-64/memcmp.S: Move to ...
* sysdeps/s390/memcmp.S: ... here.
Adjust to be usable for 31/64bit.
* sysdeps/s390/s390-32/memcmp.S: Delete File.
* sysdeps/s390/multiarch/Makefile (sysdep_routines): Add memcmp.
* sysdeps/s390/s390-32/multiarch/Makefile (sysdep_routines):
Remove memcmp.
* sysdeps/s390/s390-64/multiarch/Makefile: Likewise.
* sysdeps/s390/s390-64/multiarch/memcmp-s390x.S: Move to ...
* sysdeps/s390/multiarch/memcmp-s390x.S: ... here.
Adjust to be usable for 31/64bit.
* sysdeps/s390/s390-32/multiarch/memcmp-s390.S: Delete File.
* sysdeps/s390/s390-64/multiarch/memcmp.c: Move to ...
* sysdeps/s390/multiarch/memcmp.c: ... here.
* sysdeps/s390/s390-32/multiarch/memcmp.c: Delete File.
This patch moves all ifunc variants for memset
to sysdeps/s390/memset-z900.S. The configure-check/preprocessor logic
in sysdeps/s390/ifunc-memset.h decides if ifunc is needed at all
and which ifunc variants should be available.
E.g. if the compiler/assembler already supports z196 by default,
the older ifunc variants are not included.
If we only need the newest ifunc variant,
then we can skip ifunc at all.
Therefore the ifunc-resolvers and __libc_ifunc_impl_list are adjusted
in order to handle only the available ifunc variants.
ChangeLog:
* sysdeps/s390/ifunc-memset.h: New File.
* sysdeps/s390/memset.S: Move to ...
* sysdeps/s390/memset-z900.S ... here.
Move implementations from memset-s390x.s to here.
* sysdeps/s390/multiarch/memset-s390x.S: Delete File.
* sysdeps/s390/multiarch/Makefile (sysdep_routines):
Remove memset variants.
* sysdeps/s390/Makefile (sysdep_routines):
Add memset variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Adjust ifunc variants for
memset.
* sysdeps/s390/multiarch/memset.c: Move ifunc resolver
to ...
* sysdeps/s390/memset.c: ... here.
Adjust ifunc variants for memset.
The implementation of memset for s390-32 (31bit) and
s390-64 (64bit) is nearly the same.
This patch unifies it for maintability reasons.
__memset_z10 and __memset_z196 differs between 31 and 64bit:
-31bit needs .machinemode "zarch_nohighgprs" and llgfr %r4,%r4
-lr vs lgr and some other instructions:
But lgr and co can be also used on 31bit as this ifunc variant
is only called if we are on a zarch machine.
__memset_default differs between 31 and 64bit:
-Some 31bit vs 64bit instructions (e.g. ltr vs ltgr.
Solved with 31/64 specific instruction macros).
-The address of mvc instruction is setup in different ways
(larl vs bras). Solved with #if defined __s390x__.
Otherwise 31/64bit implementation has the same structure of the code.
ChangeLog:
* sysdeps/s390/s390-64/memset.S: Move to ...
* sysdeps/s390/memset.S: ... here.
Adjust to be usable for 31/64bit.
* sysdeps/s390/s390-32/memset.S: Delete File.
* sysdeps/s390/multiarch/Makefile (sysdep_routines): Add memset.
* sysdeps/s390/s390-32/multiarch/Makefile (sysdep_routines):
Remove memset.
* sysdeps/s390/s390-64/multiarch/Makefile: Likewise.
* sysdeps/s390/s390-64/multiarch/memset-s390x.S: Move to ...
* sysdeps/s390/multiarch/memset-s390x.S: ... here.
Adjust to be usable for 31/64bit.
* sysdeps/s390/s390-32/multiarch/memset-s390.S: Delete File.
* sysdeps/s390/s390-64/multiarch/memset.c: Move to ...
* sysdeps/s390/multiarch/memset.c: ... here.
* sysdeps/s390/s390-32/multiarch/memset.c: Delete File.
The renaming of hwcap arguments in ifunc-resolvers is needed
in order to prepare for further commits which refactors
ifunc handling for memset, memcmp, and memcpy. Now you are able
to use s390_libc_ifunc_init which stores the stfle bits
within the expression for an ifunc-resolver generated by
s390_libc_ifunc_expr.
ChangeLog:
* sysdeps/s390/multiarch/ifunc-resolve.h
(s390_libc_ifunc_init, s390_libc_ifunc,
s390_vx_libc_ifunc2_redirected): Use hwcap instead of dl_hwcap.
Add a configure check for z10 in the same way as done for z196.
ChangeLog:
* config.h.in (HAVE_S390_MIN_Z10_ZARCH_ASM_SUPPORT): New undefine.
* sysdeps/s390/configure.ac: Add check for z10 support.
* sysdeps/s390/configure: Regenerated.
Merge i386 and x86_64 atomic-machine.h to x86 atomic-machine.h.
Tested on i686 and x86_64 as well as with build-many-glibcs.py.
* sysdeps/i386/atomic-machine.h: Merged with ...
* sysdeps/x86_64/atomic-machine.h: To ...
* sysdeps/x86/atomic-machine.h: This. New file.
Tested with 'make check' on x86_64-linux-gnu and i686-linux.gnu.
* include/time.h
(__localtime64): Add.
* manual/maint.texi: Document Y2038 symbol handling.
* time/localtime.c
(__localtime64): Add.
[__TIMERSIZE != 64] (__localtime): Turn into a wrapper.
GCC mainline now gives errors for an asm that clobbers the stack
pointer. According to
<https://gcc.gnu.org/ml/gcc-patches/2018-12/msg00932.html> GCC
previously ignored such a clobber; thus, this patch removes it from
the clobbers for ia64 syscalls.
Tested with build-many-glibcs.py for ia64-linux-gnu.
* sysdeps/unix/sysv/linux/ia64/sysdep.h (ASM_CLOBBERS_6_COMMON):
Do not clobber r12.
Continuing the process of building up and using Python infrastructure
for extracting and using values in headers, this patch adds a test
that MAP_* constants from sys/mman.h agree with those in the Linux
kernel headers. (Other sys/mman.h constants could be added to the
test separately.)
This set of constants has grown over time, so the generic code is
enhanced to allow saying extra constants are OK on either side of the
comparison (where the caller sets those parameters based on the Linux
kernel headers version, compared with the version the headers were
last updated from). Although the test is a custom Python file, my
intention is to move in future to a single Python script for such
tests and text files it takes as inputs, once there are enough
examples to provide a guide to the common cases in such tests (I'd
like to end up with most or all such sets of constants copied from
kernel headers having such tests, and likewise for structure layouts
from the kernel).
The Makefile code is essentially the same as for tst-signal-numbers,
but I didn't try to find an object file to depend on to represent the
dependency on the headers used by the test (the conform/ tests don't
try to represent such header dependencies at all, for example).
Tested with build-many-glibcs.py, and also for x86_64 with older
kernel headers.
* scripts/glibcextract.py (compare_macro_consts): Take parameters
to allow extra macros from first or second sources.
* sysdeps/unix/sysv/linux/tst-mman-consts.py: New file.
* sysdeps/unix/sysv/linux/Makefile [$(subdir) = misc]
(tests-special): Add $(objpfx)tst-mman-consts.out.
($(objpfx)tst-mman-consts.out): New makefile target.
Linux kernel have remove stat64 family from default syscall set, new
implementations with statx is needed when __ARCH_WANT_STAT64 is not
define. This patch add conditionals for relevant functions, using statx
system call to get information and then copy to the return buf, ref to
include/linux/fs.h from linux kernel.
* sysdeps/unix/sysv/linux/Makefile: Add statx_cp.c.
* sysdeps/unix/sysv/linux/fxstat64.c: Add conditionals for kernel
without stat64 system call support.
* sysdeps/unix/sysv/linux/fxstatat64.c: Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/fxstat.c: Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/fxstatat.c: Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/lxstat.c: Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/lxstat64.c: Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/xstat.c: Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/xstat64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/statx_cp.c: New file.
* sysdeps/unix/sysv/linux/statx_cp.c: Likewise.
* sysdeps/unix/sysv/linux/statx_cp.h: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/statx_cp.c: Likewise.
[BZ #18040]
Problem reported by Saito Takaaki <tails.saito@gmail.com> in
https://debbugs.gnu.org/32592
Call stack get_subexp->get_subexp_sub->clean_state_log_if_needed may
call extend_buffers which reallocates the re_string_t internal buffer.
Local variable 'buf' was not updated in such case, resulting in
use-after-free.
* posix/regexec.c (get_subexp): Update 'buf' after call to
get_subexp_sub.
Continuing the removal of bits/mathinline.h inlines that would better
be done by the compiler, this patch removes x86 inlines for asinh,
acosh and atanh functions (only for fast-math, non-SSE 32-bit x86).
I've filed <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=88502> for
adding such inlines as an optimization in GCC.
Tested for x86_64 and x86.
* sysdeps/x86/fpu/bits/mathinline.h (asinh): Remove inline
definition.
(acosh): Likewise.
(atanh): Likewise.
The test case misc/tst-efgcvt.c only tests the double variants of the
Old-fashioned System V number-to-string functions: ecvt, fcvt, and their
re-entrant counterparts. With a few macros, the code can be reused for
the long double versions of these functions. A future patch will reuse
it again for IEEE long double on powerpc64le.
Tested for powerpc and powerpc64le.
Sometimes tst-nss-test3 fails with:
error: test-container.c:386: unable to open .../nss/libnss_test1.so for reading
The test tst-nss-test3 which runs in a container needs
libnss_test[12].so. (see e.g. tst-nss-test3.script).
Before this test was moved from tests to tests-container variable,
the requirement was met. Thus this patch adds this requirement
also for tests in tests-container.
ChangeLog:
* nss/Makefile (tst-nss-test3.out): New rule.
GCC mainline now gives errors for an asm that clobbers the stack
pointer. According to
<https://gcc.gnu.org/ml/gcc-patches/2018-12/msg00932.html> GCC
previously ignored such a clobber; thus, this patch removes it from
_hurd_stack_setup.
Tested with build-many-glibcs.py for i686-gnu.
* sysdeps/mach/hurd/i386/init-first.c (_hurd_stack_setup): Do not
clobber sp.
This patch fix Hygon Dhyana processor CPU Vendor ID detection
problem in glibc sysdep module, current glibc codes doesn't
recognize Dhyana CPU Vendor ID("HygonGenuine") and set kind to
arch_kind_other, which result to incorrect zero value for
__cache_sysconf() syscall. As Hygon Dhyana share most
architecture feature as AMD Family 17h, this patch add Hygon CPU
Vendor ID check and setup kind to arch_kind_amd and reuse AMD
code path, which lead to correct return value in
__cache_sysconf() syscall. we run the glibc test suite for both
Hygon Dhyana and AMD EPYC and found no failure case.
Background:
Chengdu Haiguang IC Design Co., Ltd (Hygon) is a Joint Venture
between AMD and Haiguang Information Technology Co.,Ltd., aims at
providing high performance x86 processor for China server market.
Its first generation processor codename is Dhyana, which
originates from AMD technology and shares most of the
architecture with AMD's family 17h, but with different CPU Vendor
ID("HygonGenuine")/Family series number(Family 18h).
Related Hygon kernel patch can be found on
http://lkml.kernel.org/r/5ce86123a7b9dad925ac583d88d2f921040e859b.1538583282.git.puwen@hygon.cn
Signed-off-by: fanjinke <fanjinke@hygon.cn>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
In the read lock function (__pthread_rwlock_rdlock_full) there was a
code path which would fail to reload __readers while waiting for
PTHREAD_RWLOCK_RWAITING to change. This failure to reload __readers
into a local value meant that various conditionals used the old value
of __readers and with only two threads left it could result in an
indefinite stall of one of the readers (waiting for PTHREAD_RWLOCK_RWAITING
to go to zero, but it never would).
Continuing the removal of bits/mathinline.h inlines that would better
be done by the compiler, this patch removes an x86 inline for hypot
functions (only for fast-math, only for non-SSE 32-bit x86). I've
filed <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=88474> for adding
such an inline as an optimization in GCC.
Tested for x86_64 and x86.
* sysdeps/x86/fpu/bits/mathinline.h (hypot): Remove inline
definition.
Non-consumable data, alias data not related to benchmarks, should be sent to
the standard error, thus pipelines can work as expected.
* benchtests/scripts/compare_bench.py (do_compare): write to stderr in case
stat is not present.
* benchtests/scripts/compare_bench.py (plot_graphs): write to stderr in case
timings field is not present. Also string showing the output filename goes
into the stderr.
Allows user to pick a statistic, defaulting to min and mean, from command
line. At the same time, if stat does not exit, catch the run-time exception
and keep comparing the rest of benchmarked functions. Finally, take care of
division-by-zero exceptions and as the latter, keep comparing the rest of the
functions, turning the script a bit more fault tolerant thus useful.
* benchtests/scripts/compare_bench.py (do_compare): Catch KeyError and
ZeroDivisorError exceptions.
* benchtests/scripts/compare_bench.py (compare_runs): Use stats argument to
loop through user provided statistics.
* benchtests/scripts/compare_bench.py (main): Include the --stats argument.
Allows other functions to be processed, making the script a bit more fault
tolerant thus useful.
* benchtests/scripts/compare_bench.py (compare_runs): Continue instead of return.
The “any later version” clause was missing. This change was approved
in principle by the FSF in RT ticket #1316403.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Add CFI information about the offset of registers stored in the stack
frame.
[BZ #23614]
* sysdeps/powerpc/powerpc64/addmul_1.S (FUNC): Add CFI offset for
registers saved in the stack frame.
* sysdeps/powerpc/powerpc64/lshift.S (__mpn_lshift): Likewise.
* sysdeps/powerpc/powerpc64/mul_1.S (__mpn_mul_1): Likewise.
Signed-off-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Reviewed-by: Gabriel F. T. Gomes <gabriel@inconstante.eti.br>
On some platforms, long double may have either the same format as double
or another, wider format, such as the Quadruple IEC 60559 long double
format or the IBM Extended Precision format (both 128-bits wide).
Selecting between the available formats is done by using one of the
following compiler switches: -mlong-double-128, for the wider format, or
-mlong-double-64, for the narrower. On all platforms that provide this
choice, the wider format is the default.
When the non-default format is selected by user code (i.e.: when
building with -mlong-double-64) calls to functions that take long double
parameters or return a long double type (e.g.: strfroml) are redirected
to a compat function, via assembler redirection, by headers such as
bits/stdlib-ldbl.h or bits/misc-ldbl.h.
In glibc builds, however, these headers are currently being read from
the system directories (/usr/include/bits) rather than from the source
directory. Although this works correctly today, it raises
reproducibility concerns. Besides that, builds for powerpc64le will
need these files from the source directory, because on powerpc64le, the
new redirections for long double with IEEE binary128 format will be
implemented in these headers.
Tested for powerpc64 and powerpc64le.
Since the commit
commit 698fb75b9f
Author: Zack Weinberg <zackw@panix.com>
Date: Wed Mar 7 14:32:01 2018 -0500
Add __v*printf_internal with flags arguments
_IO_vfprintf is gone. This did not trigger any test case failures on
powerpc and powerpc64le, because there were no tests that covered it.
However, new test cases for nldbl versions of argp.h functions exposed
the problem.
Tested for powerpc64 and powerpc64le.
The threshold value at which powf overflows depends on the rounding mode
and the current check did not take this into account. So when the result
was rounded away from zero it could become infinity without setting
errno to ERANGE.
Example: pow(0x1.7ac7cp+5, 23) is 0x1.fffffep+127 + 0.1633ulp
If the result goes above 0x1.fffffep+127 + 0.5ulp then errno is set,
which is fine in nearest rounding mode, but
powf(0x1.7ac7cp+5, 23) is inf in upward rounding mode
powf(-0x1.7ac7cp+5, 23) is -inf in downward rounding mode
and the previous implementation did not set errno in these cases.
The fix tries to avoid affecting the common code path or calling a
function that may introduce a stack frame, so float arithmetics is used
to check the rounding mode and the threshold is selected accordingly.
[BZ #23961]
* math/auto-libm-test-in: Add new test case.
* math/auto-libm-test-out-pow: Regenerated.
* sysdeps/ieee754/flt-32/e_powf.c (__powf): Fix overflow check.
During postclean.req testing it was found that the fork in the
parent process (after the unshare syscall) would fail with ENOMEM
(see recursive_remove() in test-container.c). While failing with
ENOMEM is certainly unexpected, it is simply easier to refactor
the design and have the parent remain outside of the namespace.
This change moves the postclean.req processing to a distinct
process (the parent) that then forks the test process (which will
have to fork once more to complete uid/gid transitions). When the
test process exists the cleanup process will ensure all files are
deleted when a post clean is requested.
Signed-off-by: DJ Delorie <dj@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
[BZ #23948]
* support/test-container.c: Move postclean step to before we
change namespaces.
This patch eliminates the gen-py-const.awk variant of gen-as-const,
switching to use of gnu-as-const.py (with a new --python option) to
process .pysym files (i.e., to generate nptl_lock_constants.py), as
the syntax of those files is identical to that of .sym files.
Note that the generated nptl_lock_constants.py is *not* identical to
the version generated by the awk script. Apart from the trivial
changes (comment referencing the new script, and output being sorted),
the constant FUTEX_WAITERS, PTHREAD_MUTEXATTR_FLAG_BITS,
PTHREAD_MUTEXATTR_FLAG_PSHARED and PTHREAD_MUTEX_PRIO_CEILING_MASK are
now output as positive rather than negative constants (on x86_64
anyway; maybe not necessarily on 32-bit systems):
< FUTEX_WAITERS = -2147483648
---
> FUTEX_WAITERS = 2147483648
< PTHREAD_MUTEXATTR_FLAG_BITS = -251662336
< PTHREAD_MUTEXATTR_FLAG_PSHARED = -2147483648
---
> PTHREAD_MUTEXATTR_FLAG_BITS = 4043304960
> PTHREAD_MUTEXATTR_FLAG_PSHARED = 2147483648
< PTHREAD_MUTEX_PRIO_CEILING_MASK = -524288
---
> PTHREAD_MUTEX_PRIO_CEILING_MASK = 4294443008
This is because gen-as-const has a cast of the constant value to long
int, which gen-py-const lacks.
I think the positive values are more logically correct, since the
constants in question are in fact unsigned in C. But to reliably
produce gen-as-const.py output for constants that always (in C and
Python) reflects the signedness of values with the high bit of "long
int" set would mean more complicated logic needs to be used in
computing values.
The more correct positive values by themselves produce a failure of
nptl/test-mutexattr-printers, because masking with
~PTHREAD_MUTEXATTR_FLAG_BITS & ~PTHREAD_MUTEX_NO_ELISION_NP now leaves
a bit -1 << 32 in the Python value, resulting in a KeyError exception.
To avoid that, places masking with ~ of one of the constants in
question are changed to mask with 0xffffffff as well (this reflects
how ~ in Python applies to an infinite-precision integer whereas ~ in
C does not do any promotions beyond the width of int).
Tested for x86_64.
* scripts/gen-as-const.py (main): Handle --python option.
* scripts/gen-py-const.awk: Remove.
* Makerules (py-const-script): Use gen-as-const.py.
($(py-const)): Likewise.
* nptl/nptl-printers.py (MutexPrinter.read_status_no_robust): Mask
with 0xffffffff together with ~(PTHREAD_MUTEX_PRIO_CEILING_MASK).
(MutexAttributesPrinter.read_values): Mask with 0xffffffff
together with ~PTHREAD_MUTEXATTR_FLAG_BITS and
~PTHREAD_MUTEX_NO_ELISION_NP.
* manual/README.pretty-printers: Update reference to
gen-py-const.awk.
This patch converts the tst-signal-numbers test from shell + awk to
Python.
As with gen-as-const, the point is not so much that shell and awk are
problematic for this code, as that it's useful to build up general
infrastructure in Python for use of a range of code involving
extracting values from C headers. This patch moves some code from
gen-as-const.py to a new glibcextract.py, which also gains functions
relating to listing macros, and comparing the values of a set of
macros from compiling two different pieces of code.
It's not just signal numbers that should have such tests; pretty much
any case where glibc copies constants from Linux kernel headers should
have such tests that the values and sets of constants agree except
where differences are known to be OK. Much the same also applies to
structure layouts (although testing those without hardcoding lists of
fields to test will be more complicated).
Given this patch, another test for a set of macros would essentially
be just a call to glibcextract.compare_macro_consts (plus boilerplate
code - and we could move to having separate text files defining such
tests, like the .sym inputs to gen-as-const, so that only a single
Python script is needed for most such tests). Some such tests would
of course need new features, e.g. where the set of macros changes in
new kernel versions (so you need to allow new macro names on the
kernel side if the kernel headers are newer than the version known to
glibc, and extra macros on the glibc side if the kernel headers are
older). tst-syscall-list.sh could become a Python script that uses
common code to generate lists of macros but does other things with its
own custom logic.
There are a few differences from the existing shell + awk test.
Because the new test evaluates constants using the compiler, no
special handling is needed any more for one signal name being defined
to another. Because asm/signal.h now needs to pass through the
compiler, not just the preprocessor, stddef.h is included as well
(given the asm/signal.h issue that it requires an externally provided
definition of size_t). The previous code defined __ASSEMBLER__ with
asm/signal.h; this is removed (__ASSEMBLY__, a different macro,
eliminates the requirement for stddef.h on some but not all
architectures).
Tested for x86_64, and with build-many-glibcs.py.
* scripts/glibcextract.py: New file.
* scripts/gen-as-const.py: Do not import os.path, re, subprocess
or tempfile. Import glibcexctract.
(compute_c_consts): Remove. Moved to glibcextract.py.
(gen_test): Update reference to compute_c_consts.
(main): Likewise.
* sysdeps/unix/sysv/linux/tst-signal-numbers.py: New file.
* sysdeps/unix/sysv/linux/tst-signal-numbers.sh: Remove.
* sysdeps/unix/sysv/linux/Makefile
($(objpfx)tst-signal-numbers.out): Use tst-signal-numbers.py.
Redirect stderr as well as stdout.
I have tested that this builds and the resulting program still work.
This was tested on gcc23.fsffrance.org, and for some reason the vdso
there seems unused even when using shared libraries.
[BZ #19767]
* sysdeps/unix/sysv/linux/mips/init-first.c: Remove #ifdef SHARED.
* sysdeps/unix/sysv/linux/mips/libc-vdso.h: Remove #ifdef SHARED.
* sysdeps/unix/sysv/linux/mips/mips32/sysdep.h: Define
ALWAYS_USE_VSYSCALL.
* sysdeps/unix/sysv/linux/mips/mips64/n32/sysdep.h: Define
ALWAYS_USE_VSYSCALL.
* sysdeps/unix/sysv/linux/mips/mips64/n64/sysdep.h: Define
ALWAYS_USE_VSYSCALL.
This patch updates files coming from tzcode to the versions in tzcode
2018g. No changes elsewhere in glibc were needed.
Tested for x86_64.
* timezone/private.h: Update from tzcode 2018g.
* timezone/tzfile.h: Likewise.
* timezone/tzselect.ksh: Likewise.
* timezone/zdump.c: Likewise.
* timezone/zic.c: Likewise.
This one tests for BZ#23907 where the double free
test didn't check the tcache bin bounds before dereferencing
the bin.
[BZ #23907]
* malloc/tst-tcfree3.c: New.
* malloc/Makefile: Add it.
We can't use "__typeof__ (getcpu)" since getcpu is Linux specific and
Hurd doesn't have it.
Tested with build-many-glibcs.py.
* include/sched.h (__getcpu): Don't use __typeof__ (getcpu).
On powerpc64le, long double can currently take two formats: the same as
double (-mlong-double-64) or IBM Extended Precision (default with
-mlong-double-128 or explicitly with -mabi=ibmlongdouble). The internal
implementation of scanf-like functions is aware of these possibilites
and, based on the format in use, properly calls __strtold_internal or
__strtod_internal, saving the return to a variable of type double or
long double.
When library support for TS 18661-3 was added to glibc, a new function,
__strtof128_internal, was added to enable reading of floating-point
values with IEEE binary128 format into the _Float128 type. Now that
powerpc64le is getting support for its third long double format, and
taking into account that this format is the same as the format of
_Float128, this patch extends __vfscanf_internal and __vfwscanf_internal
to call __strtof128_internal or __wcstof128_internal when appropriate.
The result gets saved into a variable of _Float128 type.
Tested for powerpc64le.
Along with posix_spawn_file_actions_addchdir,
posix_spawn_file_actions_addfchdir is the subject of a change proposal
for POSIX: <http://austingroupbugs.net/view.php?id=1208>
