A subsequent change will require including <config.h> for defining
symbol_version_reference. <libc-symbol.h> should not include
<config.h> for _ISOMAC, so it cannot define symbol_version_reference
anymore, but symbol_version_reference is needed <shlib-compat.h> even
for _ISOMAC. Moving the definition of symbol_version_reference to a
separate file <libc-symver.h> makes it possible to use a single
definition for both cases.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2b47727c68 ("posix: Consolidate register-atfork") introduced a fork.h
header to declare the atfork unregister hook, but was missing adding it
for htl.
This fixes tst-atfork2.
During critical sections, signal handling is deferred and thus RPCs return
EINTR, even if SA_RESTART is set. We thus have to restart the whole critical
section in that case.
This also adds HURD_CRITICAL_UNLOCK in the cases where one wants to
break the section in the middle.
This change adds new test to assess sigtimedwait's timeout related
functionality - the sigset_t is configured for SIGUSR1, which will
not be triggered, so sigtimedwait just waits for timeout.
To be more specific - two use cases are checked:
- if sigtimedwait times out immediately when passed struct timespec has
zero values of tv_nsec and tv_sec.
- if sigtimedwait times out after timeout specified in passed argument
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This code provides test to check if time on target machine is properly
read via ntp_gettime syscall.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
After this patch applied the ntp_gettimex function is always declared
in the sys/timex.h header. Currently it is not when __REDIRECT_NTH is
defined (i.e. in ARM 32 bit port).
The generic implementation basically handle the system agnostic logic
(filtering out the invalid signals) while the __libc_sigaction is
the function with implements the system and architecture bits.
Checked on x86_64-linux-gnu and i686-linux-gnu.
The instructions xsxexpdp and xsxexpqp introduced on POWER9 extract
the exponent from a double-precision and quad-precision floating-point
respectively, thus they can be used to improve ilogb, ilogbf and ilogbf128.
It is not actually used by the legacy unwinder linked into
libc.so, and it conflicts with the unwind-link functionality
in libpthread.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
__x86_get_cpuid_feature_leaf is called during early startup, before
the stack check guard is initialized and is hence not safe to build
with stack-protector.
Additionally, IFUNC resolvers for static tst-ifunc-isa tests get
called too early for stack protector to be useful, so fix them to
disable stack protector for the resolver functions.
This fixes all failures seen with --enable-stack-protector=all
configuration.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
commit 2d651eb926
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Fri Sep 18 07:55:14 2020 -0700
x86: Move x86 processor cache info to cpu_features
missed _SC_LEVEL1_ICACHE_LINESIZE.
1. Add level1_icache_linesize to struct cpu_features.
2. Initialize level1_icache_linesize by calling handle_intel,
handle_zhaoxin and handle_amd with _SC_LEVEL1_ICACHE_LINESIZE.
3. Return level1_icache_linesize for _SC_LEVEL1_ICACHE_LINESIZE.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Both htl and nptl uses a different data structure to implement atfork
handlers. The nptl one was refactored by 27761a1042 to use a dynarray
which simplifies the code.
This patch moves the nptl one to be the generic implementation and
replace Hurd linked one. Different than previous NPTL, Hurd also uses
a global lock, so performance should be similar.
Checked on x86_64-linux-gnu, i686-linux-gnu, and with a build for
i686-gnu.
The nptl already expects a Linux syscall internally. Also
__is_internal_signal is used and the DEBUGGING_P check is removed.
Checked on x86_64-linux-gnu.
Some Linux filesystems might not fully support 64 bit timestamps [1],
which make some Linux specific tests to fail when they check for the
functionality.
This patch adds a new libsupport function, support_path_support_time64,
that returns whether the target file supports or not 64 bit timestamps.
The support is checked by issuing a utimensat and verifying both the
last access and last modification time against a statx call.
The tests that might fail are also adjusted to check the file support
as well:
$ dd if=/dev/zero of=loopbackfile.img bs=100M count=1
1+0 records in
1+0 records out
104857600 bytes (105 MB, 100 MiB) copied, 0,0589568 s, 1,8 GB/s
$ sudo losetup -fP loopbackfile.img
$ mkfs.xfs loopbackfile.img
meta-data=loopbackfile.img isize=512 agcount=4, agsize=6400 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=0
= reflink=1
data = bsize=4096 blocks=25600, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1
log =internal log bsize=4096 blocks=1368, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
$ mkdir loopfs
$ sudo mount -o loop /dev/loop0 loopfs/
$ sudo chown -R azanella:azanella loopfs
$ TMPDIR=loopfs/ ./testrun.sh misc/tst-utimes
error: ../sysdeps/unix/sysv/linux/tst-utimes.c:55: File loopfs//utimesfECsK1 does not support 64-bit timestamps
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1795576
Previous commit was missing deleted files in sysdeps/ieee754/dbl-64.
Finally remove all mpa related files, headers, declarations, probes, unused
tables and update makefiles.
Reviewed-By: Paul Zimmermann <Paul.Zimmermann@inria.fr>
Finally remove all mpa related files, headers, declarations, probes, unused
tables and update makefiles.
Reviewed-By: Paul Zimmermann <Paul.Zimmermann@inria.fr>
Remove slow paths in tan. Add ULP annotations. Merge 'number' into 'mynumber'.
Remove unused entries from tan constants.
Reviewed-By: Paul Zimmermann <Paul.Zimmermann@inria.fr>
This patch series removes all remaining slow paths and related code.
First asin/acos, tan, atan, atan2 implementations are updated, and the final
patch removes the unused mpa files, headers and probes. Passes buildmanyglibc.
Remove slow paths from asin/acos. Add ULP annotations based on previous slow
path checks (which are approximate). Update AArch64 and x86_64 libm-test-ulps.
Reviewed-By: Paul Zimmermann <Paul.Zimmermann@inria.fr>
Now that fstat is implemented on top fstatat we need to handle negative
inputs. The implementation now rejects AT_FDCWD, which would otherwise
be accepted by the kernel.
Checked on x86_64-linux-gnu and on i686-linux-gnu.
This patch updates the kernel version in the test tst-mman-consts.py
to 5.11. (There are no new MAP_* constants covered by this test in
5.11 that need any other header changes.)
Tested with build-many-glibcs.py.
Now that compat_symbol_reference works in non-internal tests.
Also do not build and run the test at all on architectures which
do not have the pre-2.28 symbol version of fcntl.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
compat_symbol_reference works in non-internal tests now. Also
avoid building the test for unsupported configurations at all.
I verified by building with build-many-glibcs.py that GLIBC_2.1.3
works as the predecessor of GLIBC_2.2. (Symbol versions in
the early days are complex.)
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
__nss_database_lookup2's extra arguments were left unused in the
nsswitch reloading patch set; this broke compat (default config
ignored) and shadow files (secondary name ignored) which relies on
these fallbacks.
This patch adds in the previous behavior by correcting the
initialization of the database list to reflect the fallbacks. This
means that the nss_database_lookup2 interface no longer needs to be
passed the fallback info, so API and callers were adjusted.
Since all callers needed to be edited anyway, the calls were changed
from __nss_database_lookup2 to the faster __nss_database_get. This
was an intended optimization which was deferred during the initial
lookup changes to avoid touching so many files.
The test case verifies that compat targets work (passwd) and that the
default configuration works (group). Tested on x86-64.
