Always null-terminate the buffer and set E2BIG if the buffer is too
small. This fixes bug 27857.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The internal buffer size is set to 2048 bytes. This is less than
the original BUFSIZ value used by buffered_vfprintf before
the conversion, but it hopefully covers all cases where write
boundaries matter.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The buffer resizing algorithm is slightly different. The initial
buffer is on the stack, and small buffers are directly allocated
on the heap using the exact required size. The overhead of the
additional copy is compensated by the lowered setup cost for buffers
compared to libio streams.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
After the rewrite and the implicit unbuffered streams handling, this
is very straightforward to add.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
vfprintf is entangled with vfwprintf (of course), __printf_fp,
__printf_fphex, __vstrfmon_l_internal, and the strfrom family of
functions. The latter use the internal snprintf functionality,
so vsnprintf is converted as well.
The simples conversion is __printf_fphex, followed by
__vstrfmon_l_internal and __printf_fp, and finally
__vfprintf_internal and __vfwprintf_internal. __vsnprintf_internal
and strfrom* are mostly consuming the new interfaces, so they
are comparatively simple.
__printf_fp is a public symbol, so the FILE *-based interface
had to preserved.
The __printf_fp rewrite does not change the actual binary-to-decimal
conversion algorithm, and digits are still not emitted directly to
the target buffer. However, the staging buffer now uses bytes
instead of wide characters, and one buffer copy is eliminated.
The changes are at least performance-neutral in my testing.
Floating point printing and snprintf improved measurably, so that
this Lua script
for i=1,5000000 do
print(i, i * math.pi)
end
runs about 5% faster for me. To preserve fprintf performance for
a simple "%d" format, this commit has some logic changes under
LABEL (unsigned_number) to avoid additional function calls. There
are certainly some very easy performance improvements here: binary,
octal and hexadecimal formatting can easily avoid the temporary work
buffer (the number of digits can be computed ahead-of-time using one
of the __builtin_clz* built-ins). Decimal formatting can use a
specialized version of _itoa_word for base 10.
The existing (inconsistent) width handling between strfmon and printf
is preserved here. __print_fp_buffer_1 would have to use
__translated_number_width to achieve ISO conformance for printf.
Test expectations in libio/tst-vtables-common.c are adjusted because
the internal staging buffer merges all virtual function calls into
one.
In general, stack buffer usage is greatly reduced, particularly for
unbuffered input streams. __printf_fp can still use a large buffer
in binary128 mode for %g, though.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This function will be used to compute the width of a number
after i18n digit translation.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
And __wprintf_function_invoke. These functions will be used to
to call registered printf specifier callbacks on printf buffers
after vfprintf and vfwprintf have been converted to buffers. The new
implementation avoids alloca/variable length arrays.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
These buffers will eventually be used instead of FILE * objects
to implement printf functions. The multibyte buffer is struct
__printf_buffer, the wide buffer is struct __wprintf_buffer.
To enable writing type-generic code, the header files
printf_buffer-char.h and printf_buffer-wchar_t.h define the
Xprintf macro differently, enabling Xprintf (buffer) to stand
for __printf_buffer and __wprintf_buffer as appropriate. For
common cases, macros like Xprintf_buffer are provided as a more
syntactically convenient shortcut.
Buffer-specific flush callbacks are implemented with a switch
statement instead of a function pointer, to avoid hardening issues
similar to those of libio vtables. struct __printf_buffer_as_file
is needed to support custom printf specifiers because the public
interface for that requires passing a FILE *, which is why there
is a trapdoor back from these buffers to FILE * streams.
Since the immediate user of these interfaces knows when processing
has finished, there is no flush callback for the end of processing,
only a flush callback for the intermediate buffer flush.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The iterator allows grouping while scanning forward through
the digits. This enables emitting digits as they are processed.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch is split out of
<https://sourceware.org/pipermail/libc-alpha/2022-December/144122.html>.
atoi has undefined behavior on out-of-range input, which makes it
problematic to use anywhere in glibc that might be processing input
out-of-range for atoi but not specified to produce undefined behavior
for the function calling atoi. Change some uses of atoi to call
strtol instead; this avoids the undefined behavior, though there is no
guarantee that the overflow handling of strtol is really right in
those places either. This also serves to avoid localplt test failures
given an installed header redirection for strtol (which means that the
call from the inline atoi implementation doesn't end up at a hidden
alias from libc_hidden_proto).
Certainly, the use of atoi is questionable in argp-help.c (shared with
gnulib, so shouldn't depend on glibc implementation details, and
processing user-provided input), and maybe also in argp-parse.c (I'm
not sure what that code in argp-parse.c is meant to be used for). I
also changed inet/rexec.c and resolv/res_init.c similarly to use
strtol to avoid such localplt failures, although given those files (in
those versions) are only used in glibc it's not problematic for them
to rely on the specific behavior of glibc's atoi on out-of-range input
(in the absence of compiler optimizations based on the undefined
behavior) in the same way it's problematic for gnulib code to do so.
There may be other uses of atoi (or atol or atoll), in any of glibc's
installed code, for which it would also be appropriate to avoid the
undefined behavior on out-of-range input; this patch only fixes the
specific cases needed to avoid localplt failures.
Tested for x86_64.
Their presence causes stub warnings to be created on architectures
which do not implement them.
Fixes commit d1d23b1342 ("Lninux: consolidate
epoll_create implementation") and commit 842128f160
("Linux: consolidate inotify_init implementation").
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
8b8c768e3c ("Force use of -ffreestanding when checking for gnumach
headers") was passing -ffreestanding to CFLAGS only, but headers checks are
performed with the preprocessor, so we rather need to pass it to CPPFLAGS.
Without this ./configure assumes that we are in a fully hosted
environment, which might not be the case. After this patch, we can rely on
the freestanding header files provided by GCC such as stdint.h.
Message-Id: <Y5+0V9osFc/zXMq0@mars>
Current scheme only consideres the first argument for both --required
and --optional, where the idea is to append a new item.
Checked on x86_64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
In the case of INCORRECT usage of `memcmp(a, b, N)` where `a` and `b`
are concurrently modified as `memcmp` runs, there can be a SIGSEGV
in `L(ret_nonzero_vec_end_0)` because the sequential logic
assumes that `(rdx - 32 + rax)` is a positive 32-bit integer.
To be clear, this change does not mean the usage of `memcmp` is
supported. The program behaviour is undefined (UB) in the
presence of data races, and `memcmp` is incorrect when the values
of `a` and/or `b` are modified concurrently (data race). This UB
may manifest itself as a SIGSEGV. That being said, if we can
allow the idiomatic use cases, like those in yottadb with
opportunistic concurrency control (OCC), to execute without a
SIGSEGV, at no cost to regular use cases, then we can aim to
minimize harm to those existing users.
The fix replaces a 32-bit `addl %edx, %eax` with the 64-bit variant
`addq %rdx, %rax`. The 1-extra byte of code size from using the
64-bit instruction doesn't contribute to overall code size as the
next target is aligned and has multiple bytes of `nop` padding
before it. As well all the logic between the add and `ret` still
fits in the same fetch block, so the cost of this change is
basically zero.
The relevant sequential logic can be seen in the following
pseudo-code:
```
/*
* rsi = a
* rdi = b
* rdx = len - 32
*/
/* cmp a[0:15] and b[0:15]. Since length is known to be [17, 32]
in this case, this check is also assumed to cover a[0:(31 - len)]
and b[0:(31 - len)]. */
movups (%rsi), %xmm0
movups (%rdi), %xmm1
PCMPEQ %xmm0, %xmm1
pmovmskb %xmm1, %eax
subl %ecx, %eax
jnz L(END_NEQ)
/* cmp a[len-16:len-1] and b[len-16:len-1]. */
movups 16(%rsi, %rdx), %xmm0
movups 16(%rdi, %rdx), %xmm1
PCMPEQ %xmm0, %xmm1
pmovmskb %xmm1, %eax
subl %ecx, %eax
jnz L(END_NEQ2)
ret
L(END2):
/* Position first mismatch. */
bsfl %eax, %eax
/* The sequential version is able to assume this value is a
positive 32-bit value because the first check included bytes in
range a[0:(31 - len)] and b[0:(31 - len)] so `eax` must be
greater than `31 - len` so the minimum value of `edx` + `eax` is
`(len - 32) + (32 - len) >= 0`. In the concurrent case, however,
`a` or `b` could have been changed so a mismatch in `eax` less or
equal than `(31 - len)` is possible (the new low bound is `(16 -
len)`. This can result in a negative 32-bit signed integer, which
when zero extended to 64-bits is a random large value this out
out of bounds. */
addl %edx, %eax
/* Crash here because 32-bit negative number in `eax` zero
extends to out of bounds 64-bit offset. */
movzbl 16(%rdi, %rax), %ecx
movzbl 16(%rsi, %rax), %eax
```
This fix is quite simple, just make the `addl %edx, %eax` 64 bit (i.e
`addq %rdx, %rax`). This prevents the 32-bit zero extension
and since `eax` is still a low bound of `16 - len` the `rdx + rax`
is bound by `(len - 32) - (16 - len) >= -16`. Since we have a
fixed offset of `16` in the memory access this must be in bounds.
A recent GCC change resulted in localplt test failures on sparc64
because of references to _Qp_fgt. This is analogous to all the other
floating-point symbols allowed in localplt.data, so it seems
appropriate to allow this one as well.
Tested with build-many-glibcs.py for sparc64-linux-gnu (GCC mainline),
where it fixes the test failure.
The static linker might impose any order or internal function
position, so change the test to check if the audit prints the
symbol only once in any order.
Although the nscd module is built with 64 bit time_t, the routines
linked direct to libc.so need to use the internal symbols.
Reviewed-by: DJ Delorie <dj@redhat.com>
If there is enough space in the chunk to satisfy the new size, return
the old pointer as is, thus avoiding any locks or reallocations. The
only real place this has a benefit is in large chunks that tend to get
satisfied with mmap, since there is a large enough spare size (up to a
page) for it to matter. For allocations on heap, the extra size is
typically barely a few bytes (up to 15) and it's unlikely that it would
make much difference in performance.
Also added a smoke test to ensure that the old pointer is returned
unchanged if the new size to realloc is within usable size of the old
pointer.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
The generic (sysdeps/unix/sysv/linux/generic/bits/typesizes.h) and
default (bits/typesizes.h) differs in two fields:
bits/typesizes.h Linux generic
__NLINK_T_TYPE __UWORD_TYPE __U32_TYPE
__BLKSIZE_T_TYPE __SLONGWORD_TYPE __S32_TYPE
Sinceit leads to different C++ mangling names, the default typesize.h
is copied for the requires archtiectures and the generic is make the
default Linux one.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
It is currently used for csky, arc, nios2, and or1k. Newer 64 bit
architecture, like riscv32 and loongarch, reimplement it to override
F_GETLK64/F_SETLK64/F_SETLKW64.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The includes chain is added on each architecture sysdep.h and
the __NR__llseek hack is moved to lseek.c and lseek64.c.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This is similar to other LFS consolidation, where the non-LFS is only
built if __OFF_T_MATCHES_OFF64_T is not defined and the LFS version
is aliased to non-LFS name if __OFF_T_MATCHES_OFF64_T is defined.
For non-LFS variant, use sendfile syscall if defined, otherwise use
sendfile64 plus the offset overflow check (as generic implementation).
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use unlink syscall if defined, otherwise use unlinkat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use symlink syscall if defined, otherwise use symlinkat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use rmdir syscall if defined, otherwise use unlinkat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use readlink syscall if defined, otherwise readlinkat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use mkdir syscall if defined, otherwise use mkdirat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use link syscall if defined, otherwise use linkat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use lchown syscall if defined, otherwise use fchownat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use inotify_init syscall if defined, otherwise use inotify_init1.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use epoll_create syscall if defined, otherwise use epoll_create1.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use dup2 syscall if defined, otherwise use dup3.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use chown syscall if defined, otherwise use fchownat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use chmod syscall if defined, otherwise use fchmodat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
