On s390 (31bit) various debug/tst-*chk* testcases are failing as the tests
are ending with a segmentation fault.
One test is e.g. calling wcsnrtombs in debug/tst-chk1.c:1549.
The function wcsnrtombs itself calls __wcsnlen. This function is called via
PLT! The PLT-stub itself loads the address from GOT (r12 is assumed to be
the GOT-pointer). In this case the loaded address is zero and the following
branch leads to the segmentation fault.
Due to the attribute_hidden in commit 44af8a32c3
"Mark internal wchar functions with attribute_hidden [BZ #18822]"
for e.g. the __wcsnlen function, r12 is not loaded with the GOT-pointer
in wcsnrtombs.
On s390x (64bit), this __wcsnlen call is also using the PLT-stub. But it is
not failing as the GOT-pointer is setup with larl-instruction by the PLT-stub
itself.
Note: On s390x/s390, __wcsnlen is an IFUNC symbol.
On x86_64, __wcsnlen is also an IFUNC symbol and is called via PLT, too.
Further IFUNC symbols on s390 which were marked as hidden by the mentioned
commit are: __wcscat, __wcsncpy, __wcpncpy, __wcschrnul.
This patch removes the attribute_hidden in wchar.h.
Then the compiler setups e.g. r12 on s390 in order to call __wcsnlen via PLT.
ChangeLog:
* include/wchar.h (__wcsnlen, __wcscat, __wcsncpy, __wcpncpy,
__wcschrnul): Remove attribute_hidden.
Numbers for very small sizes (< 128B) are much noisier for non-cached
benchmarks like the walk benchmarks, so don't include them.
* benchtests/bench-memcpy-walk.c (START_SIZE): Set to 128.
* benchtests/bench-memmove-walk.c (START_SIZE): Likewise.
* benchtests/bench-memset-walk.c (START_SIZE): Likewise.
Make the walking benchmarks walk only backwards since copying both
ways is biased in favour of implementations that use non-temporal
stores for larger sizes; falkor is one of them. This also fixes up
bugs in computation of the result which ended up multiplying the
length with the timing result unnecessarily.
* benchtests/bench-memcpy-walk.c (do_one_test): Copy only
backwards. Fix timing computation.
* benchtests/bench-memmove-walk.c (do_one_test): Likewise.
* benchtests/bench-memset-walk.c (do_one_test): Walk backwards
on memset by N at a time. Fix timing computation.
Also remove a comment about performance. fwrite vs writev performance
is a very complex topic and cannot be reduced to a simple advice based
on transfer size.
The requirement to write "deny" to /proc/<pid>/setgroups for a given user
namespace before being able to write a gid mapping was introduced in Linux
3.19. Before that this requirement including the file did not exist.
So don't fail when errno == ENOENT.
System defaults vary, and a mere unshare (CLONE_NEWNS) (which is part of
support_become_root) is no longer sufficient.
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
create_temp_file automatically supplies the test directory and the
XXXXXX suffix. support_create_temp_directory required the caller to
specify them, which was confusing.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Linux commit ID cba6ac4869e45cc93ac5497024d1d49576e82666 reserved a new
bit for a scenario where transactional memory is available, but the
suspended state is disabled.
* sysdeps/powerpc/bits/hwcap.h (PPC_FEATURE2_HTM_NO_SUSPEND): New
macro.
* sysdeps/powerpc/dl-procinfo.c (_dl_powerpc_cap_flags): Add
htm-no-suspend.
Signed-off-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
This patch continues the preparation for additional _FloatN / _FloatNx
function aliases by using libm_alias_ldouble for sysdeps/x86_64/fpu
long double functions, so that they can have _Float64x aliases added
in future.
Tested for x86_64, including build-many-glibcs.py tests that installed
stripped shared libraries are unchanged by the patch.
* sysdeps/x86_64/fpu/e_expl.S: Include <libm-alias-ldouble.h>.
[USE_AS_EXPM1L] (expm1l): Define using libm_alias_ldouble.
* sysdeps/x86_64/fpu/s_ceill.S: Include <libm-alias-ldouble.h>.
(ceill): Define using libm_alias_ldouble.
* sysdeps/x86_64/fpu/s_copysignl.S: Include
<libm-alias-ldouble.h>.
(copysignl): Define using libm_alias_ldouble.
* sysdeps/x86_64/fpu/s_fabsl.S: Include <libm-alias-ldouble.h>.
(fabsl): Define using libm_alias_ldouble.
* sysdeps/x86_64/fpu/s_floorl.S: Include <libm-alias-ldouble.h>.
(floorl): Define using libm_alias_ldouble.
* sysdeps/x86_64/fpu/s_fmaxl.S: Include <libm-alias-ldouble.h>.
(fmaxl): Define using libm_alias_ldouble.
* sysdeps/x86_64/fpu/s_fminl.S: Include <libm-alias-ldouble.h>.
(fminl): Define using libm_alias_ldouble.
* sysdeps/x86_64/fpu/s_llrintl.S: Include <libm-alias-ldouble.h>.
(llrintl): Define using libm_alias_ldouble.
(lrintl): Likewise.
* sysdeps/x86_64/fpu/s_nearbyintl.S: Include
<libm-alias-ldouble.h>.
(nearbyintl): Define using libm_alias_ldouble.
* sysdeps/x86_64/fpu/s_truncl.S: Include <libm-alias-ldouble.h>.
(truncl): Define using libm_alias_ldouble.
* sysdeps/x86_64/x32/fpu/s_lrintl.S: Include
<libm-alias-ldouble.h>.
(lrintl): Define using libm_alias_ldouble.
This patch continues the preparation for additional _FloatN / _FloatNx
function aliases by using libm_alias_ldouble for sysdeps/i386/fpu long
double functions, so that they can have _Float64x aliases added in
future.
Tested for x86_64 (which includes some of these implementations) and
x86, including build-many-glibcs.py tests that installed stripped
shared libraries are unchanged by the patch.
* sysdeps/i386/fpu/e_expl.S: Include <libm-alias-ldouble.h>.
[USE_AS_EXPM1L] (expm1l): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_asinhl.S: Include <libm-alias-ldouble.h>.
(asinhl): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_atanl.c: Include <libm-alias-ldouble.h>.
(atanl): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_cbrtl.S: Include <libm-alias-ldouble.h>.
(cbrtl): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_ceill.S: Include <libm-alias-ldouble.h>.
(ceill): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_copysignl.S: Include <libm-alias-ldouble.h>.
(copysignl): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_fabsl.S: Include <libm-alias-ldouble.h>.
(fabsl): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_floorl.S: Include <libm-alias-ldouble.h>.
(floorl): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_fmaxl.S: Include <libm-alias-ldouble.h>.
(fmaxl): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_fminl.S: Include <libm-alias-ldouble.h>.
(fminl): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_frexpl.S: Include <libm-alias-ldouble.h>.
(frexpl): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_llrintl.S: Include <libm-alias-ldouble.h>.
(llrintl): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_logbl.c: Include <libm-alias-ldouble.h>.
(logbl): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_lrintl.S: Include <libm-alias-ldouble.h>.
(lrintl): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_nearbyintl.S: Include <libm-alias-ldouble.h>.
(nearbyintl): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_nextafterl.c: Include <libm-alias-ldouble.h>.
(nextafterl): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_remquol.S: Include <libm-alias-ldouble.h>.
(remquol): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_rintl.c: Include <libm-alias-ldouble.h>.
(rintl): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_truncl.S: Include <libm-alias-ldouble.h>.
(truncl): Define using libm_alias_ldouble.
* sysdeps/i386/i686/fpu/s_fmaxl.S: Include <libm-alias-ldouble.h>.
(fmaxl): Define using libm_alias_ldouble.
* sysdeps/i386/i686/fpu/s_fminl.S: Include <libm-alias-ldouble.h>.
(fminl): Define using libm_alias_ldouble.
Further _FloatN / _FloatNx type alias support will involve making
architecture-specific .S files use the common macros for libm function
aliases. Making them use those macros will also serve to simplify
existing code for aliases / symbol versions in various cases, similar
to such simplifications for ldbl-opt code.
The libm-alias-*.h files sometimes need to include <bits/floatn.h> to
determine which aliases they should define. At present, this does not
work for inclusion from .S files because <bits/floatn.h> can define
typedefs for old compilers. This patch changes all the
<bits/floatn.h> and <bits/floatn-common.h> headers to include
__ASSEMBLER__ conditionals. Those conditionals disable everything
related to C syntax in the __ASSEMBLER__ case, not just the problem
typedefs, as that seemed cleanest. The __HAVE_* definitions remain in
the __ASSEMBLER__ case, as those provide information that is required
to define the correct set of aliases.
Tested with build-many-glibcs.py for a representative set of
configurations (x86_64-linux-gnu i686-linux-gnu ia64-linux-gnu
powerpc64le-linux-gnu mips64-linux-gnu-n64 sparc64-linux-gnu) with GCC
6. Also tested with GCC 6 for i686-linux-gnu in conjunction with
changes to use alias macros in .S files.
* bits/floatn-common.h [!__ASSEMBLER]: Disable everything related
to C syntax instead of availability and properties of types.
* bits/floatn.h [!__ASSEMBLER]: Likewise.
* sysdeps/ia64/bits/floatn.h [!__ASSEMBLER]: Likewise.
* sysdeps/ieee754/ldbl-128/bits/floatn.h [!__ASSEMBLER]: Likewise.
* sysdeps/mips/ieee754/bits/floatn.h [!__ASSEMBLER]: Likewise.
* sysdeps/powerpc/bits/floatn.h [!__ASSEMBLER]: Likewise.
* sysdeps/x86/bits/floatn.h [!__ASSEMBLER]: Likewise.
Without UID/GID maps, file creation will file with EOVERFLOW.
This patch is based on DJ Delorie's work on container testing.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
This patch adds the HWCAP_DCPOP macro from Linux 4.14 to the AArch64
bits/hwcap.h.
Tested (compilation only) for aarch64 with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/aarch64/bits/hwcap.h (HWCAP_DCPOP): New
macro.
GCC 4.9 and 5 do not generate a correct f{max,min}nm instruction for
__builtin_{fmax,fmin}{f} without -ffinite-math-only. It is clear a
compiler issue since the instruction can handle NaN and Inf correctly
and GCC6+ does not show this issue.
We can backport a fix to GCC 5, raise the minimum required GCC version
for aarch64 (since GCC 4.9 branch is now closed [1]) and/or add
configure check to check for this issue. However I think
-ffinite-math-only should be safe for these specific implementations
and it is a simpler solution.
Checked on aarch64-linux-gnu with GCC 5.3.1.
* sysdeps/aarch64/fpu/Makefile (CFLAGS-s_fmax.c, CFLAGS-s_fmaxf.c,
CFLAGS-s_fmin.c, CFLAGS-s_fminf.c): New rule: add -ffinite-math-only.
[1] https://gcc.gnu.org/ml/gcc/2016-08/msg00010.html
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
This patch adds ARPHRD_RAWIP from Linux 4.14 to the Linux
net/if_arp.h.
Tested for x86_64.
* sysdeps/unix/sysv/linux/net/if_arp.h (ARPHRD_RAWIP): New macro.
Linux 4.14 does not add any new syscalls; this patch updates the
version number in syscall-names.list to reflect that it's still
current for 4.14.
Tested for x86_64 (compilation with build-many-glibcs.py, using Linux
4.14).
* sysdeps/unix/sysv/linux/syscall-names.list: Update kernel
version to 4.14.
Update all sourceware links to https. The website redirects
everything to https anyway so let the web server do a bit less work.
The only reference that remains unchanged is the one in the old
ChangeLog, since it didn't seem worth changing it.
* NEWS: Update sourceware link to https.
* configure.ac: Likewise.
* crypt/md5test-giant.c: Likewise.
* dlfcn/bug-atexit1.c: Likewise.
* dlfcn/bug-atexit2.c: Likewise.
* localedata/README: Likewise.
* malloc/tst-mallocfork.c: Likewise.
* manual/install.texi: Likewise.
* nptl/tst-pthread-getattr.c: Likewise.
* stdio-common/tst-fgets.c: Likewise.
* stdio-common/tst-fwrite.c: Likewise.
* sunrpc/Makefile: Likewise.
* sysdeps/arm/armv7/multiarch/memcpy_impl.S: Likewise.
* wcsmbs/tst-mbrtowc2.c: Likewise.
* configure: Regenerate.
* INSTALL: Regenerate.
of the strncat and strncpy function that may result in truncating
the copied string before the terminating NUL. To avoid false positive
warnings for correct code that intentionally creates sequences of
characters that aren't guaranteed to be NUL-terminated, arrays that
are intended to store such sequences should be decorated with a new
nonstring attribute. This change add this attribute to Glibc and
uses it to suppress such false positives.
ChangeLog:
* misc/sys/cdefs.h (__attribute_nonstring__): New macro.
* sysdeps/gnu/bits/utmp.h (struct utmp): Use it.
* sysdeps/unix/sysv/linux/s390/bits/utmp.h (struct utmp): Same.
Add a new tst-ttyname test that includes several named sub-testcases.
This patch is ordered after the patches with the fixes that it tests for (to
avoid breaking `git bisect`), but for reference, here's how each relevant change
so far affected the testcases in this commit, starting with
15e9a4f378:
| | before | | make checks | don't |
| | 15e9a4f | 15e9a4f | consistent | bail |
|---------------------------------+---------+---------+-------------+-------|
| basic smoketest | PASS | PASS | PASS | PASS |
| no conflict, no match | PASS[1] | PASS | PASS | PASS |
| no conflict, console | PASS | FAIL! | FAIL | PASS! |
| conflict, no match | FAIL | PASS! | PASS | PASS |
| conflict, console | FAIL | FAIL | FAIL | PASS! |
| with readlink target | PASS | PASS | PASS | PASS |
| with readlink trap; fallback | FAIL | FAIL | FAIL | PASS! |
| with readlink trap; no fallback | FAIL | PASS! | PASS | PASS |
| with search-path trap | FAIL | FAIL | PASS! | PASS |
|---------------------------------+---------+---------+-------------+-------|
| | 4/9 | 5/9 | 6/9 | 9/9 |
[1]: 15e9a4f introduced a semantic that, under certain failure
conditions, ttyname sets errno=ENODEV, where previously it didn't
set errno; it's not quite fair to hold "before 15e9a4f" ttyname to
those new semantics. This testcase actually fails, but would have
passed if we tested for the old the semantics.
Each of the failing tests before 15e9a4f are all essentially the same bug: that
it returns a PTY slave with the correct minor device number, but from the wrong
devpts filesystem instance.
15e9a4f sought to fix this, but missed several of the cases that can cause this
to happen, and also broke the case where both the erroneous PTY and the correct
PTY exist.
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Commit 15e9a4f378 introduced logic for ttyname()
sending back ENODEV to signal that we can't get a name for the TTY because we
inherited it from a different mount namespace.
However, just because we inherited it from a different mount namespace and it
isn't available at its original path, doesn't mean that its name is unknowable;
we can still try to find it by allowing the normal fall back on iterating
through devices.
An example scenario where this happens is with "/dev/console" in containers.
It's a common practice among container managers to allocate a PTY master/slave
pair in the host's mount namespace (the slave having a path like "/dev/pty/$X"),
bind mount the slave to "/dev/console" in the container's mount namespace, and
send the slave FD to a process in the container. Inside of the
container, the slave-end isn't available at its original path ("/dev/pts/$X"),
since the container mount namespace has a separate devpts instance from the host
(that path may or may not exist in the container; if it does exist, it's not the
same PTY slave device). Currently ttyname{_r} sees that the file at the
original "/dev/pts/$X" path doesn't match the FD passed to it, and fails early
and gives up, even though if it kept searching it would find the TTY at
"/dev/console". Fix that; don't have the ENODEV path force an early return
inhibiting the fall-back search.
This change is based on the previous patch that adds use of is_mytty in
getttyname and getttyname_r. Without that change, this effectively reverts
15e9a4f, which made us disregard the false similarity of file pointed to by
"/proc/self/fd/$Y", because if it doesn't bail prematurely then that file
("/dev/pts/$X") will just come up again anyway in the fall-back search.
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
In the ttyname and ttyname_r routines on Linux, at several points it needs to
check if a given TTY is the TTY we are looking for. It used to be that this
check was (to see if `maybe` is `mytty`):
__xstat64(_STAT_VER, maybe_filename, &maybe) == 0
#ifdef _STATBUF_ST_RDEV
&& S_ISCHR(maybe.st_mode) && maybe.st_rdev == mytty.st_rdev
#else
&& maybe.st_ino == mytty.st_ino && maybe.st_dev == mytty.st_dev
#endif
This check appears in several places.
Then, one of the changes made in commit 15e9a4f378
was to change that check to:
__xstat64(_STAT_VER, maybe_filename, &maybe) == 0
#ifdef _STATBUF_ST_RDEV
&& S_ISCHR(maybe.st_mode) && maybe.st_rdev == mytty.st_rdev
#endif
&& maybe.st_ino == mytty.st_ino && maybe.st_dev == mytty.st_dev
That is, it made the st_ino and st_dev parts of the check happen even if we have
the st_rdev member. This is an important change, because the kernel allows
multiple devpts filesystem instances to be created; a device file in one devpts
instance may share the same st_rdev with a file in another devpts instance, but
they aren't the same file.
This check appears twice in each file (ttyname.c and ttyname_r.c), once (in
ttyname and __ttyname_r) to check if a candidate file found by inspecting /proc
is the desired TTY, and once (in getttyname and getttyname_r) to check if a
candidate file found by searching /dev is the desired TTY. However, 15e9a4f
only updated the checks for files found via /proc; but the concern about
collisions between devpts instances is just as valid for files found via /dev.
So, update all 4 occurrences the check to be consistent with the version of the
check introduced in 15e9a4f. Make it easy to keep all 4 occurrences of the
check consistent by pulling it in to a static inline function, is_mytty.
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
is_pty returning a bool is fine since there's no possible outcome other than
true or false, and bool is used throughout the codebase.
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Linux 4.10 moved many of the documentation files around.
4.10 came out between the time the patch adding the comment (commit
15e9a4f378) was submitted and the time
it was applied (in February, January, and March 2017; respectively).
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Commit 15e9a4f378 introduced ENODEV as a possible
error condition for ttyname and ttyname_r. Update the manual to mention this GNU
extension.
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
This patch adds the new MSG_ZEROCOPY constant from Linux 4.14 to the
Linux bits/socket.h.
Tested for x86_64.
* sysdeps/unix/sysv/linux/bits/socket.h (MSG_ZEROCOPY): New enum
constant and macro.
This patch adds the new MADV_WIPEONFORK and MADV_KEEPONFORK from Linux
4.14 to bits/mman-linux.h (and bits/mman.h in the hppa case). Note
there are further hppa MADV_* changes in 4.14; I plan a separate glibc
patch for those.
Tested for x86_64.
* sysdeps/unix/sysv/linux/bits/mman-linux.h
[__USE_MISC] (MADV_WIPEONFORK): New macro.
[__USE_MISC] (MADV_KEEPONFORK): Likewise.
* sysdeps/unix/sysv/linux/hppa/bits/mman.h
[__USE_MISC] (MADV_WIPEONFORK): Likewise.
[__USE_MISC] (MADV_KEEPONFORK): Likewise.
This patch simplifies sighold a bit by removing an extra sigprocmask
and using SIG_BLOCK (which union of the current set and the set argument).
Checked on x86_64-linux-gnu.
* signal/sighold.c (sighold): Optimize implementation.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch simplify sigpause by remobing the single thread optimization
since it will be handled already by the __sigsuspend call.
Checked on x86_64-linux-gnu.
* sysdeps/posix/sigpause.c (do_sigpause): Remove.
(__sigpause): Rely on __sigsuspend to implement single thread
optimization. Add LIBC_CANCEL_HANDLED for cancellation marking.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Zack Weinberg <zackw@panix.com>
The epoll_wait wrapper uses the raw syscall if __NR_epoll_wait is defined,
and falls back to calling epoll_pwait(..., NULL) if it isn't defined.
However, it didn't include the appropriate headers for __NR_epoll_wait to
be defined, so it was *always* falling back to calling epoll_pwait!
This mistake was introduced in b62c381591,
when epoll_wait changed from being in syscalls.list to always having a C
wrapper.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This commit adds a "subheaps" field to the malloc_info output that
shows the number of heaps that were allocated to extend a non-main
arena.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
GCC mainline now supports __builtin_tgmath to allow <tgmath.h> macro
implementations that expand their arguments only once, so avoiding
exponential blowup in the size of macro expansions when calls to those
macros are nested in arguments to those macros.
This patch makes glibc's tgmath.h support using __builtin_tgmath, as a
much simpler and more efficient alternative to the existing
implementation. (As a side effect, the new feature would make it much
more practical to support decimal floating point in <tgmath.h> with
new compilers; currently, libdfp does not provide a <tgmath.h>
implementation, and making decimal arguments cause integer arguments
to be considered of type _Decimal64 instead of double would have been
very problematic in the old implementation.)
Tested for x86_64 (with GCC mainline).
[BZ #21660]
* math/tgmath.h (__HAVE_BUILTIN_TGMATH): New macro.
[__HAVE_BUILTIN_TGMATH] (__TG_F16_ARG): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TG_F32_ARG): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TG_F64_ARG): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TG_F128_ARG): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TG_F32X_ARG): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TG_F64X_ARG): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TG_F128X_ARG): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_FUNCS): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_RCFUNCS): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_1): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_2): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_2STD): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_3): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_1C): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_2C): Likewise.
(__tgml): Make conditional on [!__HAVE_BUILTIN_TGMATH].
(__floating_type): Likewise.
(__real_integer_type): Likewise.
(__complex_integer_type): Likewise.
(__expr_is_real): Likewise.
(__tgmath_real_type_sub): Likewise.
(__tgmath_real_type): Likewise.
(__tgmath_complex_type_sub): Likewise.
(__tgmath_complex_type): Likewise.
(__TGMATH_F128): Likewise.
(__TGMATH_CF128): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_UNARY_REAL_ONLY): Define using
new macros.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_UNARY_REAL_RET_ONLY): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_BINARY_FIRST_REAL_ONLY):
Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_BINARY_FIRST_REAL_STD_ONLY):
Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_BINARY_REAL_ONLY): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_BINARY_REAL_STD_ONLY): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_BINARY_REAL_RET_ONLY): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_TERNARY_FIRST_SECOND_REAL_ONLY):
Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_TERNARY_REAL_ONLY): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_TERNARY_FIRST_REAL_RET_ONLY):
Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_UNARY_REAL_IMAG): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_UNARY_IMAG): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_UNARY_REAL_IMAG_RET_REAL):
Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_BINARY_REAL_IMAG): Likewise.
(__TGMATH_UNARY_REAL_IMAG_RET_REAL_SAME): New macro.
(carg): Use __TGMATH_UNARY_REAL_IMAG_RET_REAL_SAME.
(cimag): Likewise.
(creal): Likewise.
GCC 8 warns about more cases of string functions truncating their
output or not copying a trailing NUL byte.
This patch fixes testsuite build failures caused by such warnings in
string/tester.c. In general, the warnings are disabled around the
relevant calls using DIAG_* macros, since the relevant cases are being
deliberately tested. In one case, the warning is with
-Wstringop-overflow= instead of -Wstringop-truncation; in that case,
the conditional is __GNUC_PREREQ (7, 0) (being the version where
-Wstringop-overflow= was introduced), to allow the conditional to be
removed sooner, since it's harmless to disable the warning for a
GCC version where it doesn't actually occur. In the case of warnings
for strncpy calls in test_memcmp, the calls in question are changed to
use memcpy, as they don't copy a trailing NUL and the point of that
code is to test memcmp rather than strncpy.
Tested (compilation) with GCC 8 for x86_64-linux-gnu with
build-many-glibcs.py (in conjunction with Martin's patch to allow
glibc to build).
* string/tester.c (test_stpncpy): Disable -Wstringop-truncation
for stpncpy calls for GCC 8.
(test_strncat): Disable -Wstringop-truncation warning for strncat
calls for GCC 8. Disable -Wstringop-overflow= warning for one
strncat call for GCC 7.
(test_strncpy): Disable -Wstringop-truncation warning for strncpy
calls for GCC 8.
(test_memcmp): Use memcpy instead of strncpy for calls not copying
trailing NUL.
GCC 8 warns about strncat calls with truncated output.
string/bug-strncat1.c tests such a call; this patch disables the
warning for it.
Tested (compilation) with GCC 8 for x86_64-linux-gnu with
build-many-glibcs.py (in conjunction with Martin's patch to allow
glibc to build).
* string/bug-strncat1.c: Include <libc-diag.h>.
(main): Disable -Wstringop-truncation for strncat call for GCC 8.
To support Intel Control-flow Enforcement Technology (CET) run-time
control:
1. An architecture specific field in the writable ld.so namespace is
needed to indicate if CET features are enabled at run-time.
2. An architecture specific field in struct link_map is needed if
CET features are enabled in an ELF module.
This patch adds dl-procruntime.c to the writable ld.so namespace and
link_map.h to struct link_map.
Tested with build-many-glibcs.py.
* elf/dl-support.c: Include <dl-procruntime.c>.
* include/link.h: Include <link_map.h>.
* sysdeps/generic/dl-procruntime.c: New file.
* sysdeps/generic/link_map.h: Likewise.
* sysdeps/generic/ldsodefs.h: Include <dl-procruntime.c> in
the writable ld.so namespace.
