The S390 specific test checks if the assembler has support for the new z13
vector instructions by compiling a vector instruction. The .machine and
.machinemode directives are needed to compile the vector instruction without
-march=z13 option on 31/64 bit.
On success the macro HAVE_S390_VX_ASM_SUPPORT is defined. This macro is used
to determine if the optimized functions can be build without compile errors.
If the used assembler lacks vector support, then a warning is dumped while
configuring and only the common code functions are build.
The z13 instruction support was introduced in
"[Committed] S/390: Add support for IBM z13."
(https://sourceware.org/ml/binutils/2015-01/msg00197.html)
ChangeLog:
* config.h.in (HAVE_S390_VX_ASM_SUPPORT): New macro undefine.
* sysdeps/s390/configure.ac: Add test for S390 vector instruction
assembler support.
* sysdeps/s390/configure: Regenerated.
In bc0cdc498 the configure check for HAVE_ASM_PPC_REL16 was removed
on the grounds that the minimum binutils supports rel16 relocs. This
is true, but not all references to HAVE_ASM_PPC_REL16 in the sources
were removed.
* config.h.in: Remove HAVE_ASM_PPC_REL16.
* sysdeps/powerpc/powerpc32/tls-macros.h: Remove HAVE_ASM_PPC_REL16
and false branch of conditional.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/swapcontext-common.S:
Likewise.
With AIX port deprecated there is no need to check/define
HAVE_ASM_GLOBAL_DOT_NAME anymore since the current minimum binutils
supported (2.22) does not emit global symbol with dot.
This patch removes all the HAVE_ASM_GLOBAL_DOT_NAME definition and
checks for powerpc64 port.
This patch removes the --enable-oldest-abi configure option, which has
long been bitrotten (as reported in bug 6652). The principle of
removing this option was agreed in the thread starting at
<https://sourceware.org/ml/libc-alpha/2013-07/msg00174.html>.
Tested for x86_64 and x86 that the installed shared libraries other
than libc.so are unchanged by this patch and that libc.so disassembly
and symbol versions are unchanged (debug info changes because of
changed line numbers in csu/version.c).
[BZ #6652]
* Makeconfig (soversions-default-setname): Remove variable.
($(common-objpfx)soversions.i): Don't pass default_setname to
soversions.awk.
* Makerules ($(common-objpfx)abi-versions.h): Don't pass
oldest_abi to abi-versions.awk.
* config.h.in (GLIBC_OLDEST_ABI): Remove macro undefine.
* config.make.in (oldest-abi): Remove variable.
* configure.ac (--enable-oldest-abi): Remove configure option.
* configure: Regenerated.
* csu/version.c (banner) [GLIBC_OLDEST_ABI]: Remove conditional
text.
* scripts/abi-versions.awk: Do not handle oldest_abi variable.
* scripts/soversions.awk: Do not handle default_setname variable.
* sysdeps/mach/hurd/configure.ac: Do not handle oldest_abi
variable.
* sysdeps/mach/hurd/configure: Regenerated.
* sysdeps/unix/sysv/linux/configure.ac: Do not handle oldest_abi
variable.
* sysdeps/unix/sysv/linux/configure: Regenerated.
This patch makes
sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions use %ifdef
conditionals around the different symbol version definitions for big
and little endian. (It doesn't actually change the host patterns used
for those definitions; the point is to make it possible to remove the
first column from shlib-versions by eliminating the last case where it
would be harmful for it to be treated as .*-.*-.*.) The conditional
is based on the ELFv1/ELFv2 distinction rather than BE/LE, since
that's what's already tested in configure and used for the ld.so
soname in the Makefiles. (Of course if BE ELFv2 were supported in
future, it would get new symbol versions and so need new
conditionals.)
* sysdeps/unix/sysv/linux/powerpc/powerpc64/configure.ac
(HAVE_ELFV2_ABI): AC_DEFINE in ELFv2 case.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/configure:
Regenerated.
* config.h.in (HAVE_ELFV2_ABI): New macro undefine.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions:
Condition symbol version definitions on [HAVE_ELFV2_ABI].
* config.h.in (HAVE_AVX2_SUPPORT): New #undef.
* sysdeps/i386/configure.ac: Set HAVE_AVX2_SUPPORT and
config-cflags-avx2.
* sysdeps/x86_64/configure.ac: Likewise.
* sysdeps/i386/configure: Regenerated.
* sysdeps/x86_64/configure: Likewise.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
memset-avx2 only if config-cflags-avx2 is yes.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list):
Tests for memset_chk and memset only if HAVE_AVX2_SUPPORT is
defined.
* sysdeps/x86_64/multiarch/memset.S: Define multiple versions
only if HAVE_AVX2_SUPPORT is defined.
* sysdeps/x86_64/multiarch/memset_chk.S: Likewise.
This patch removes configure tests for assembler CFI support (and
thereby eliminates an architecture-specific case in the main
configure.ac), instead assuming that support is present
unconditionally.
The main test was added in 2003 around the time CFI support was added
to the assembler. cfi_personality and cfi_lsda support were added to
the assembler in 2006. cfi_sections support was added in 2009, a few
weeks before binutils 2.20 was released; it's in 2.20, the minimum
supported version, so even that configure test is obsolete.
Tested x86_64 that the installed shared libraries are unchanged by
this patch.
* configure.ac (libc_cv_asm_cfi_directives): Remove configure
test.
* configure: Regenerated.
* config.h.in (HAVE_ASM_CFI_DIRECTIVES): Remove macro undefine.
* sysdeps/arm/configure.ac (libc_cv_asm_cfi_directive_sections):
Remove configure test.
* sysdeps/arm/configure: Regenerated.
* sysdeps/nptl/configure.ac: Do not check
libc_cv_asm_cfi_directives.
* sysdeps/nptl/configure: Regenerated.
* sysdeps/x86_64/nptl/configure.ac: Remove file.
* sysdeps/x86_64/nptl/configure: Remove generated file.
* b/sysdeps/generic/sysdep.h [HAVE_ASM_CFI_DIRECTIVES]: Make code
unconditional.
[!HAVE_ASM_CFI_DIRECTIVES]: Remove conditional code.
One piece of architecture-specific code in the main configure.ac is
the powerpc test that can define BROKEN_PPC_ASM_CR0. There's no need
to move this to a sysdeps configure script, or to work out what bug it
was testing in May 1998 to see if it's still relevant, since nothing
in the source tree now uses the results of this test. Thus, this
patch just removes the test in question.
Not tested.
* configure.ac (libc_cv_c_asmcr0_bug): Remove configure test.
* configure: Regenerated.
* config.h.in (BROKEN_PPC_ASM_CR0): Remove macro.
This patch saves and restores bound registers in symbol lookup for x86-64:
1. Branches without BND prefix clear bound registers.
2. x86-64 pass bounds in bound registers as specified in MPX psABI
extension on hjl/mpx/master branch at
https://github.com/hjl-tools/x86-64-psABIhttps://groups.google.com/forum/#!topic/x86-64-abi/KFsB0XTgWYc
Binutils has been updated to create an alternate PLT to add BND prefix
when branching to ld.so.
* config.h.in (HAVE_MPX_SUPPORT): New #undef.
* sysdeps/x86_64/configure.ac: Set HAVE_MPX_SUPPORT.
* sysdeps/x86_64/configure: Regenerated.
* sysdeps/x86_64/dl-trampoline.S (REGISTER_SAVE_AREA): New
macro.
(REGISTER_SAVE_RAX): Likewise.
(REGISTER_SAVE_RCX): Likewise.
(REGISTER_SAVE_RDX): Likewise.
(REGISTER_SAVE_RSI): Likewise.
(REGISTER_SAVE_RDI): Likewise.
(REGISTER_SAVE_R8): Likewise.
(REGISTER_SAVE_R9): Likewise.
(REGISTER_SAVE_BND0): Likewise.
(REGISTER_SAVE_BND1): Likewise.
(REGISTER_SAVE_BND2): Likewise.
(_dl_runtime_resolve): Use them. Save and restore Intel MPX
bound registers when calling _dl_fixup.
AVX-512 ISA adds 512-bit zmm registers. This patch updates
_dl_runtime_profile to pass zmm registers to run-time audit. It also
changes _dl_x86_64_save_sse and _dl_x86_64_restore_sse to upport zmm
registers, which are called when only when RTLD_PREPARE_FOREIGN_CALL
is used. Its performance impact is minimum.
* config.h.in (HAVE_AVX512_SUPPORT): New #undef.
(HAVE_AVX512_ASM_SUPPORT): Likewise.
* sysdeps/x86_64/bits/link.h (La_x86_64_zmm): New.
(La_x86_64_vector): Add zmm.
* sysdeps/x86_64/Makefile (tests): Add tst-audit10.
(modules-names): Add tst-auditmod10a and tst-auditmod10b.
($(objpfx)tst-audit10): New target.
($(objpfx)tst-audit10.out): Likewise.
(tst-audit10-ENV): New.
(AVX512-CFLAGS): Likewise.
(CFLAGS-tst-audit10.c): Likewise.
(CFLAGS-tst-auditmod10a.c): Likewise.
(CFLAGS-tst-auditmod10b.c): Likewise.
* sysdeps/x86_64/configure.ac: Set config-cflags-avx512,
HAVE_AVX512_SUPPORT and HAVE_AVX512_ASM_SUPPORT.
* sysdeps/x86_64/configure: Regenerated.
* sysdeps/x86_64/dl-trampoline.S (_dl_runtime_profile): Add
AVX-512 zmm register support.
(_dl_x86_64_save_sse): Likewise.
(_dl_x86_64_restore_sse): Likewise.
* sysdeps/x86_64/dl-trampoline.h: Updated to support different
size vector registers.
* sysdeps/x86_64/link-defines.sym (YMM_SIZE): New.
(ZMM_SIZE): Likewise.
* sysdeps/x86_64/tst-audit10.c: New file.
* sysdeps/x86_64/tst-auditmod10a.c: Likewise.
* sysdeps/x86_64/tst-auditmod10b.c: Likewise.
Autoconf has been deprecating configure.in for quite a long time.
Rename all our configure.in and preconfigure.in files to .ac.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
It has been a long practice for software using IEEE 754 floating-point
arithmetic run on MIPS processors to use an encoding of Not-a-Number
(NaN) data different to one used by software run on other processors.
And as of IEEE 754-2008 revision [1] this encoding does not follow one
recommended in the standard, as specified in section 6.2.1, where it
is stated that quiet NaNs should have the first bit (d1) of their
significand set to 1 while signalling NaNs should have that bit set to
0, but MIPS software interprets the two bits in the opposite manner.
As from revision 3.50 [2][3] the MIPS Architecture provides for
processors that support the IEEE 754-2008 preferred NaN encoding format.
As the two formats (further referred to as "legacy NaN" and "2008 NaN")
are incompatible to each other, tools have to provide support for the
two formats to help people avoid using incompatible binary modules.
The change is comprised of two functional groups of features, both of
which are required for correct support.
1. Dynamic linker support.
To enforce the NaN encoding requirement in dynamic linking a new ELF
file header flag has been defined. This flag is set for 2008-NaN
shared modules and executables and clear for legacy-NaN ones. The
dynamic linker silently ignores any incompatible modules it
encounters in dependency processing.
To avoid unnecessary processing of incompatible modules in the
presence of a shared module cache, a set of new cache flags has been
defined to mark 2008-NaN modules for the three ABIs supported.
Changes to sysdeps/unix/sysv/linux/mips/readelflib.c have been made
following an earlier code quality suggestion made here:
http://sourceware.org/ml/libc-ports/2009-03/msg00036.html
and are therefore a little bit more extensive than the minimum
required.
Finally a new name has been defined for the dynamic linker so that
2008-NaN and legacy-NaN binaries can coexist on a single system that
supports dual-mode operation and that a legacy dynamic linker that
does not support verifying the 2008-NaN ELF file header flag is not
chosen to interpret a 2008-NaN binary by accident.
2. Floating environment support.
IEEE 754-2008 features are controlled in the Floating-Point Control
and Status (FCSR) register and updates are needed to floating
environment support so that the 2008-NaN flag is set correctly and
the kernel default, inferred from the 2008-NaN ELF file header flag
at the time an executable is loaded, respected.
As the NaN encoding format is a property of GCC code generation that is
both a user-selected GCC configuration default and can be overridden
with GCC options, code that needs to know what NaN encoding standard it
has been configured for checks for the __mips_nan2008 macro that is
defined internally by GCC whenever the 2008-NaN mode has been selected.
This mode is determined at the glibc configuration time and therefore a
few consistency checks have been added to catch cases where compilation
flags have been overridden by the user.
The 2008 NaN set of features relies on kernel support as the in-kernel
floating-point emulator needs to be aware of the NaN encoding used even
on hard-float processors and configure the FPU context according to the
value of the 2008 NaN ELF file header flag of the executable being
started. As at this time work on kernel support is still in progress
and the relevant changes have not made their way yet to linux.org master
repository.
Therefore the minimum version supported has been artificially set to
10.0.0 so that 2008-NaN code is not accidentally run on a Linux kernel
that does not suppport it. It is anticipated that the version is
adjusted later on to the actual initial linux.org kernel version to
support this feature. Legacy NaN encoding support is unaffected, older
kernel versions remain supported.
[1] "IEEE Standard for Floating-Point Arithmetic", IEEE Computer
Society, IEEE Std 754-2008, 29 August 2008
[2] "MIPS Architecture For Programmers, Volume I-A: Introduction to the
MIPS32 Architecture", MIPS Technologies, Inc., Document Number:
MD00082, Revision 3.50, September 20, 2012
[3] "MIPS Architecture For Programmers, Volume I-A: Introduction to the
MIPS64 Architecture", MIPS Technologies, Inc., Document Number:
MD00083, Revision 3.50, September 20, 2012
The helper binary pt_chown tricked into granting access to another
user's pseudo-terminal.
Pre-conditions for the attack:
* Attacker with local user account
* Kernel with FUSE support
* "user_allow_other" in /etc/fuse.conf
* Victim with allocated slave in /dev/pts
Using the setuid installed pt_chown and a weak check on whether a file
descriptor is a tty, an attacker could fake a pty check using FUSE and
trick pt_chown to grant ownership of a pty descriptor that the current
user does not own. It cannot access /dev/pts/ptmx however.
In most modern distributions pt_chown is not needed because devpts
is enabled by default. The fix for this CVE is to disable building
and using pt_chown by default. We still provide a configure option
to enable hte use of pt_chown but distributions do so at their own
risk.
Check wheter the compiler has the option -fno-tree-loop-distribute-patterns
to inhibit loop transformation to library calls and uses it on memset
and memmove default implementation to avoid recursive calls.
Pretty sure we require recent enough versions of gcc/binutils to make this
check pointless. I can't any logs in the last few years where this check
didn't return "yes".
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
New configure option --enable-obsolete-rpc makes the deprecated RPC
headers and functions available at compile time as they were before
version 2.14. This option will be removed at some time in the future
after the TI-RPC library becomes fully sufficient for the needs of
existing applications.
If the compiler and flags would select the hard-float ABI
then the ARM configure fragment will set HAVE_ARM_PCS_VFP.
This is later used by the ARM shlib-versions to select
the appropriately named dynamic linker.
* sysdeps/sparc/configure.in: New file.
* sysdeps/sparc/configure: Generate.
* configure.in (libc_cv_sparc_as_vis3): Substitute.
* configure: Regenerate.
* config.h.in (HAVE_AS_VIS3_SUPPORT): New.
* config.make.in (have-as-vis3): New.
* sysdeps/sparc/sparc32/sparcv9/Makefile (ASFLAGS-*): If VIS3 is
available use -Av9d instead of -Av9a.
* sysdeps/sparc/sparc64/Makefile: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysign-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysign.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysignf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysignf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbit-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbit.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbitf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbitf.S: New file.
* config.h.in (HAVE_BINUTILS_GOTDATA): New.
(HAVE_GCC_GOTDATA): New.
* sysdeps/sparc/elf/configure.in: Test for GOTDATA
relocation support in both binutils and gcc.
* sysdeps/sparc/elf/configure: Regenerate.
Some symbols have to be identified process-wide by their name. This is
particularly important for some C++ features (e.g., class local static data
and static variables in inline functions). This cannot completely be
implemented with ELF functionality so far. The STB_GNU_UNIQUE binding
helps by ensuring the dynamic linker will always use the same definition for
all symbols with the same name and this binding.
2007-03-22 Jakub Jelinek <jakub@redhat.com>
* config.h.in (HAVE_LIBCAP): Add.
* nscd/selinux.h: Include sys/capability.h rather than non-existent
sys/capabilities.h.
* nscd/selinux.c (preserve_capabilities): Use cap_free instead of
free_caps. Cast away const from 4th cap_set_flag argument.
* elf/check-textrel.c: Include config.h.
(AB(handle_file)): Don't fail if PF_X | PF_W on architectures known
to have executable writable PLT.
* sysdeps/powerpc/powerpc32/configure.in (HAVE_PPC_SECURE_PLT): New
test.
* config.h.in (HAVE_PPC_SECURE_PLT): Add.
* malloc/malloc.c (MALLOC_ALIGNMENT): Set to __alignof__ (long double)
if long double is more aligned than 2 * SIZE_SZ.
(misaligned_chunk): Define.
(public_rEALLOc, _int_free, _int_realloc): Use it.
* configure.in: Add --enable-stackguard-randomization option.
(ENABLE_STACKGUARD_RANDOMIZE): New define.
* config.h.in (ENABLE_STACKGUARD_RANDOMIZE): Add.
* sysdeps/unix/sysv/linux/dl-osinfo.h: Include stdint.h.
(_dl_setup_stack_chk_guard): New inline function.
* sysdeps/generic/dl-osinfo.h: Include stdint.h.
(_dl_setup_stack_chk_guard): New inline function.
* elf/rtld.c (__stack_chk_guard): New variable.
(dl_main): Remove all traces of TLS_INIT_TP_EXPENSIVE.
Set __stack_chk_guard to _dl_setup_stack_chk_guard (),
use THREAD_SET_STACK_GUARD if defined.
* elf/Versions (ld): Export __stack_chk_guard@@GLIBC_2.4.
* sysdeps/generic/libc-start.c (__stack_chk_guard): New variable.
(__libc_start_main): Set __stack_chk_guard to
_dl_setup_stack_chk_guard (), use THREAD_SET_STACK_GUARD if defined.
* sysdeps/generic/libc-tls.c (__libc_setup_tls): Remove all
traces of TLS_INIT_TP_EXPENSIVE.
* debug/Versions (libc): Export __stack_chk_fail@@GLIBC_2.4.
* debug/Makefile (routines): Add stack_chk_fail.
(static-only-routines): Add stack_chk_fail_local.
* debug/stack_chk_fail_local.c: New file.
* debug/stack_chk_fail.c: New file.
* elf/Makefile: Add rules to build and run tst-stackguard1{,-static}
tests.
* elf/tst-stackguard1.c: New file.
* elf/tst-stackguard1-static.c: New file.
* elf/stackguard-macros.h: New file.
* config.h.in: Define HAVE_LIBAUDIT.
* config.make.in: Define have-libaudit.
* nscd/Makefile: If libaudit is available, link nscd with it.
* nscd/selinux.c: If HAVE_LIBAUDIT is defined, log using libaudit.
Patch by Steve Grubb <sgrubb@redhat.com>.
2004-07-05 Ulrich Drepper <drepper@redhat.com>
* elf/dl-init.c: Don't define and use _dl_starting_up if
HAVE_INLINED_SYSCALLS is defined and the variable is not used.
* elf/dl-support.c: Likewise.
* elf/rtld.c: Likewise.
* elf/dl-misc.c (_dl_debug_vdprintf): Use writev syscall directly
if HAVE_INLINED_SYSCALLS is defined.
* sysdeps/powerpc/powerpc64/dl-machine.h: Don't rest _dl_starting_up
here.
* sysdeps/powerpc/powerpc32/dl-start.S: Likewise.
* sysdeps/unix/sysv/linux/configure.in: Define HAVE_INLINED_SYSCALLS.
* config.h.in: Add entry for HAVE_INLINED_SYSCALLS.
* sysdeps/posix/profil.c: If compiled for ld.so, omit code which
is needed to stop profiling.
* elf/dl-open.c (dl_open_worker): If a newly opened object is to be
profile make sure it cannot be unloaded.
* sysdeps/unix/sysv/linux/dl-origin.c: Inline readlink syscall.
* sysdeps/unix/sysv/linux/fcntl.c: If compiled without cancellation
support, make sure the helper function is inlined.
* sysdeps/unix/sysv/linux/pread.c: Likewise.
* sysdeps/unix/sysv/linux/pwrite.c: Likewise.
* sysdeps/unix/sysv/linux/i386/fcntl.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/fcntl.c: Likewise.
* config.h.in: Add entry for HAVE_LIBIDN.
* configure.in: If libidn add-on present define HAVE_LIBIDN.
* Versions.def: Add entry for libcidn.
2004-03-07 Simon Josefsson <jas@extundo.com>
* resolv/netdb.h [__USE_GNU]: Add new AI_IDN ai_flags for addrinfo.
[__USE_GNU]: Add new error code EAI_IDN_ENCODE for getaddrinfo.
* sysdeps/posix/getaddrinfo.c: Add prototype for __idna_to_ascii_lz
and define IDNA_SUCCESS.
(gaih_inet): If ai_flags have AI_IDN, invoke __idna_to_ascii_lz.
(getaddrinfo): Fix EAI_BADFLAGS test to include AI_IDN.
All changes only applicable when glibc is compiled with the libidn
add-on.
2004-03-07 Ulrich Drepper <drepper@redhat.com>
2004-01-14 Ulrich Drepper <drepper@redhat.com>
* configure.in: Define HAVE_Z_RELRO if the linker supports -z relro.
* config.h.in: Add entry for HAVE_Z_RELRO.
* include/libc-symbols.h: Define attribute_relro.
* elf/dl-load.c: Add attribute_relro to env_path_list, capstr, ncapstr,
max_capstrlen, and max_dirnamelen definitions.
* elf/rtld.c: Add attribute_relro to _dl_argc, _dl_argv, _dl_skip_args,
load_time, start_time, library_path, preloadlist, version_info,
any_debug.
Remove rtld_total_time. Make it a local variable. Pass pointer to
it to print_statistics. Change print_statistics accordingly.
* sysdeps/generic/dl-sysdep.c: Add attribute_relro to _dl_auxv. Use
attribute_relro instead of explicitly assigning variable to the
.data.rel.ro section for __libc_enable_secure and __libc_stack_end.
* sysdeps/generic/ldsodefs.h: Declare __libc_stack_end, _dl_argc,
_dl_argv, _dl_argv_internal with attribute_relro.
2003-12-02 David Mosberger <davidm@hpl.hp.com>
* sysdeps/ia64/elf/initfini.c: Add unwind info.
* sysdeps/ia64/dl-machine.h (elf_machine_matches_host): Mark with
attribute "unused".
(elf_machine_dynamic): Mark with attributes "unused" and "const".
(elf_machine_runtime_setup): Likewise.
* sysdeps/generic/dl-fptr.c (make_fptr_table): Mark with
attribute "always_inline".
* sysdeps/ia64/dl-machine.h (__ia64_init_bootstrap_fdesc_table):
Likewise.
* configure.in: Check whether compiler has libunwind support.
* config.make.in (have-cc-with-libunwind): New variable.
* config.h.in (HAVE_CC_WITH_LIBUNWIND): New macro.
* Makeconfig (gnulib): If have-cc-withh-libunwind is "yes", also
mention -lunwind.
003-11-12 David Mosberger <davidm@hpl.hp.com>
* sysdeps/unix/sysv/linux/ia64/sysdep.h: Define DO_CALL_VIA_BREAK.
Redefine DO_CALL to use vdso if supported, otherwise DO_CALL_VIA_BREAK.
Likewise for DO_INLINE_SYSCALL. Make INTERNAL_SYSCALL use
DO_INLINE_SYSCALL.
* sysdeps/unix/sysv/linux/ia64/vfork.S: Use DO_CALL_VIA_BREAK()
instead of DO_CALL().
* sysdeps/unix/sysv/linux/ia64/clone2.S: Use break directly instead
of DO_CALL().
* sysdeps/unix/sysv/linux/ia64/brk.S (__curbrk): Restructure it
to take advantage of DO_CALL() macro.
* sysdeps/unix/sysv/linux/ia64/setcontext.S: Likewise.
* sysdeps/unix/sysv/linux/ia64/getcontext.S: Likewise.
* elf/rtld.c (dl_main): Restrict dl_sysinfo_dso check to first
program header. On ia64, the check failed previously because
there are two program headers.
* sysdeps/generic/s_nexttowardf.c: Likewise.
* math/bug-nexttoward.c: New file.
* configure.in: New check for -g on .S files.
* configure: Regenerated.
* config.make.in (have-cpp-asm-debuginfo): New variable.
* config.h.in (HAVE_CPP_ASM_DEBUGINFO): New #undef.
* Makeconfig (ASFLAGS): New variable, if undefined and
$(have-cpp-asm-debuginfo), take options matching -g% from $(CFLAGS).
* Makerules (compile.S, COMPILE.S): Use $(ASFLAGS).
just return &_nl_C_locobj instead of copying it.
* locale/freelocale.c (__freelocale): Check for &_nl_C_locobj.
* locale/duplocale.c (__duplocale): Likewise.
2002-10-07 Roland McGrath <roland@frob.com>
* config.h.in (HAVE_I386_SET_GDT): New #undef.
* sysdeps/mach/configure.in: Define it with new check for i386_set_gdt.
* sysdeps/mach/configure: Regenerated.
2002-10-06 Franz Sirl <Franz.Sirl-kernel@lauterbach.com>
* sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep.h (INLINE_SYSCALL):
Add all necessary register outputs for syscall-clobbered registers.
2002-10-02 David Mosberger <davidm@hpl.hp.com>
* sysdeps/ia64/bzero.S: Rewritten by Sverre Jarp to tune for
Itanium 2 (and Itanium).
Fix unwind directives and make it fit in 80 columns.
* sysdeps/ia64/memset.S: Ditto.
* sysdeps/ia64/memcpy.S: Ditto.
Move jump table to .rodata section.
2002-10-03 Roland McGrath <roland@frob.com>
* sysdeps/mach/hurd/i386/init-first.c (_hurd_stack_setup): Add
clobbers to asm.
* sysdeps/sparc/sparc32/dl-machine.h (elf_machine_load_address): Don't
rely on *r_offset of R_SPARC_RELATIVE reloc in .got to contain the
addend.
* sysdeps/sparc/sparc64/dl-machine.h (elf_machine_load_address): Use
the same l_addr computation.
* sysdeps/sparc/sparc64/configure.in: Removed.
* sysdeps/sparc/sparc64/configure: Removed.
* config.h.in (SPARC64_DYNAMIC_BEFORE_GOT): Remove.
* sysdeps/mach/hurd/bits/errno.h: Regenerated.
* sysdeps/gnu/Versions: New file.
* sysdeps/unix/sysv/linux/Versions (libc: GLIBC_2.1): Remove
_sys_errlist; sys_errlist; _sys_nerr; sys_nerr; from here.
* sysdeps/gnu/Makefile ($(..)sysdeps/gnu/errlist-compat.c): New target.
($(objpfx)errlist.d): Depend on $(..)sysdeps/gnu/errlist-compat.c.
* sysdeps/gnu/errlist.awk: Make output define _sys_errlist_internal
and _sys_nerr_internal instead of anything else. Make it include
"errlist-compat.c" if [!NOT_IN_libc && !ERRLIST_NO_COMPAT].
Make it emit some asm magic if [EMIT_ERR_MAX].
* sysdeps/gnu/errlist.c: Regenerated.
* sysdeps/gnu/errlist-compat.awk: New file.
* sysdeps/gnu/errlist-compat.c: New file (generated).
* sysdeps/mach/hurd/errlist.c (ERRLIST_NO_COMPAT): New macro.
(_sys_errlist_internal): Define this as a macro for _hurd_errlist.
(_sys_nerr_internal): Define this is a macro for _hurd_nerr.
(SYS_ERRLIST, SYS_NERR): Macros removed.
(sys_nerr, _sys_nerr): Remove these weak aliases.
* sysdeps/unix/sysv/linux/errlist.c: File removed.
* sysdeps/unix/sysv/linux/errlist.h: File removed.
* sysdeps/unix/sysv/linux/arm/errlist.c: File removed.
* include/libc-symbols.h (declare_symbol): New macro.
* config.h.in (ASM_TYPE_DIRECTIVE_PREFIX): New #undef.
* configure.in: New check to define it.
* configure: Regenerated.
MACH_MSG_TYPE_INTEGER_T -> integer_t in sizeof.
Use a union rather than casts to compare mach_msg_type_t as int.
2002-03-25 Roland McGrath <roland@frob.com>
* hurd/hurdchdir.c (_hurd_change_directory_port_from_name): Don't
check off the end of NAME when it's shorter than 2 chars.
Reported by Ognyan Kulev <ogi@fmi.uni-sofia.bg>.
2002-03-17 Roland McGrath <roland@frob.com>
* sysdeps/mach/hurd/i386/sys/io.h: New file.
* sysdeps/mach/hurd/i386/ioperm.c: New file.
* sysdeps/mach/hurd/i386/Dist: Add them.
* sysdeps/mach/hurd/i386/Versions
(libc: GLIBC_2.2.6): New set, add ioperm.
* sysdeps/mach/configure.in: New check to set HAVE_I386_IO_PERM_MODIFY.
(mach_interface_list): Check for mach_i386.defs.
* config.h.in (HAVE_I386_IO_PERM_MODIFY): #undef it.
* sysdeps/mach/configure: Regenerated.
2002-03-15 H.J. Lu <hjl@gnu.org>
Ulrich Drepper <drepper@redhat.com>
* configure.in: Check for availability of
init_array/fini_array/preinit_array handling in binutils.
* config.h.in (HAVE_INITFINI_ARRAY): New macro.
* config.make.in (have-initfini-array): New variable.
2002-03-11 Jakub Jelinek <jakub@redhat.com>
* sysdeps/i386/elf/configure.in: Fix comment.
* sysdeps/sparc/sparc64/configure.in: New.
* sysdeps/sparc/sparc64/dl-machine.h (elf_machine_load_address): Fix
if .dynamic comes before .got.
* config.h.in (SPARC64_DYNAMIC_BEFORE_GOT): Add.
* sysdeps/sparc/sparc64/hp-timing.h (HP_TIMING_DIFF,
HP_TIMING_ACCUM): Fix typos.
* string/strfry.c: Add some more randomness to the seed.
Patch by James A Morrison <ja2morri@student.math.uwaterloo.ca>.
Patch by James Antill <james@anqd.org> [PR libc/2787].
* sysdeps/mach/configure.in: Check for host_page_size RPC to define it.
* mach/mach_init.c (__mach_init) [HAVE_HOST_PAGE_SIZE]: Use
host_page_size instead of vm_statistics.
2002-02-07 Andreas Schwab <schwab@suse.de>
* configure.in: Fix check for -zcombreloc.
2002-02-06 H.J. Lu <hjl@gnu.org>
* config.h.in (HAVE_BUILTIN_MEMSET): New.
* configure.in: Check if __builtin_memset really works.
* elf/rtld.c (_dl_start): Check HAVE_BUILTIN_MEMSET instead of
__GNUC_PREREQ (2, 96) before using __builtin_memset.
2002-02-06 Jakub Jelinek <jakub@redhat.com>
* io/bug-ftw3.c (main): Don't try the test if root.
2002-02-06 Martin Schwidefsky <schwidefsky@de.ibm.com>
* sysdeps/unix/sysv/linux/s390/brk.c (__brk): Correct inline assembly
constraints.
* sysdeps/unix/sysv/linux/s390/s390-32/bits/resource.h (RLIMIT_LOCKS):
Add RLIMIT_LOCKS and adjust RLIMIT_NLIMITS.
* sysdeps/unix/sysv/linux/s390/s390-64/bits/resource.h (RLIMIT_LOCKS):
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/clone.S (clone): Make clone
a weak alias for __clone.
* sysdeps/unix/sysv/linux/s390/s390-64/clone.S (clone): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/profil-counter.h: Fix typo.
* sysdeps/unix/sysv/linux/s390/s390-64/Makefile: Add framestate.
* sysdeps/unix/sysv/linux/s390/s390-64/Versions: New file.
* sysdeps/unix/sysv/linux/s390/s390-64/mmap.S (__mmap64): Make __mmap
a weak alias for __mmap64.
* sysdeps/mips/atomicity.h (exchange_and_add): Not use branch likely.
* sysdeps/unix/sysv/linux/mips/sys/tas.h (_test_and_set): Likewise.
* sysdeps/generic/dl-tls.c: Don't read TLS header if TLS is not needed.
* config.h.in (HAVE_MIG_RETCODE): New #undef.
* sysdeps/mach/hurd/configure.in (hurd_MIG_RETCODE: New macro
swiped from hurd package's aclocal.m4; use it to set HAVE_MIG_RETCODE.
* sysdeps/mach/hurd/configure: Regenerated.
