This is useful in situations where the long double type is
less precise than the type under test. This adds a new
wrapper macro LITM(x) to each type to append the proper
suffix onto macro constants found in math.h.
These are local to the test suite. Rename them as a macro starting
with lit_pi and a series of postfix operations to give us a constant
starting with lit_pi.
The lit prefix is intended to enable easy substitutions via
gen-test-libm.pl if needed.
The powerpc implementations of fabsl for ldbl-128ibm (both powerpc32
and powerpc64) wrongly raise the "invalid" exception for sNaN
arguments. fabs functions should be quiet for all inputs including
signaling NaNs. The problem is the use of a comparison instruction
fcmpu to determine if the high part of the argument is negative and so
the low part needs to be negated; such instructions raise "invalid"
for sNaNs.
There is a pure integer implementation of fabsl in
sysdeps/ieee754/ldbl-128ibm/s_fabsl.c. However, it's not necessary to
use it to avoid such exceptions. The fsel instruction does not raise
exceptions for sNaNs, and can be used in place of the original
comparison. (Note that if the high part is zero or a NaN, it does not
matter whether the low part is negated; the choice of whether the low
part of a zero is +0 or -0 does not affect the value, and the low part
of a NaN does not affect the value / payload either.)
The condition in GCC for fsel to be available is TARGET_PPC_GFXOPT,
corresponding to the _ARCH_PPCGR predefined macro. fsel is available
on all 64-bit processors supported by GCC. A few 32-bit processors
supported by GCC do not have TARGET_PPC_GFXOPT despite having hard
float support. To support those processors, integer code (similar to
that in copysignl) is included for the !_ARCH_PPCGR case for
powerpc32.
Tested for powerpc32 (configurations with and without _ARCH_PPCGR) and
powerpc64.
[BZ #20157]
* sysdeps/powerpc/powerpc32/fpu/s_fabsl.S (__fabsl): Use fsel to
determine whether to negate low half if [_ARCH_PPCGR], and integer
comparison otherwise.
* sysdeps/powerpc/powerpc64/fpu/s_fabsl.S (__fabsl): Use fsel to
determine whether to negate low half.
This patch removes various no-longer-used macros from libm-test.inc.
NO_TEST_INLINE_FLOAT, NO_TEST_INLINE_DOUBLE and M_PI_6l would have
been used before relevant tests were moved to auto-libm-test-in.
TEST_COND_x86_64 and TEST_COND_x86 were for tests in auto-libm-test-in
XFAILed for x86, and are no longer relevant now the bugs in question
have been fixed and the XFAILing removed (if future x86-specific
XFAILs become needed, they can always be added back).
Tested for x86_64 and x86.
* math/libm-test.inc (NO_TEST_INLINE_FLOAT): Remove macro.
(NO_TEST_INLINE_DOUBLE): Likewise.
(TEST_COND_x86_64): Likewise.
(TEST_COND_x86): Likewise.
(M_PI_6l): Likewise.
Replace most of the type specific macros with the equivalent
type-generic macro using the following sed replacement command below:
sed -ri -e 's/defined TEST_FLOAT/TEST_COND_binary32/' \
-e 's/ndef TEST_FLOAT/ !TEST_COND_binary32/' \
-e 's/def TEST_FLOAT/ TEST_COND_binary32/' \
-e 's/defined TEST_DOUBLE/TEST_COND_binary64/'\
-e 's/ndef TEST_DOUBLE/ !TEST_COND_binary64/' \
-e 's/def TEST_DOUBLE/ TEST_COND_binary64/' \
-e 's/defined TEST_LDOUBLE && //' \
-e 's/ifdef TEST_LDOUBLE/if MANT_DIG >= 64/' \
-e 's/defined TEST_LDOUBLE/MANT_DIG >= 64/' \
-e '/nexttoward_test_data\[\]/,/ };/!s/LDBL_(MIN_EXP|MAX_EXP|MANT_DIG)/\1/g' \
libm-test.inc
With a little extra manual cleanup to simplify the following case:
#if MANT_DIG >= 64
# if MANT_DIG >= 64
...
# endif
...
Note, TEST_LDOUBLE checks are replaced by MANT_DIG >= 64 excepting
where another property of the type is being tested. And, the final
regex is intended to avoid replacing LDBL_ macro usage within the
nexttoward tests which explicitly take argument 2 as long double.
Attempt to creatively redefine the macros
to choose tests based on the format being
tested, not the type.
Note, TS 18661 does not define any printf
modifiers, so we need to be a little more
verbose about constructing strings to
output.
The ldbl-128ibm implementations of ceill, floorl, roundl, truncl,
rintl and nearbyintl wrongly return an sNaN when given an sNaN
argument. This patch fixes them to add such an argument to itself to
turn it into a quiet NaN. (The code structure means this "else" case
applies to any argument which is zero or not finite; it's OK to do
this in all such cases.)
Tested for powerpc.
[BZ #20156]
* sysdeps/ieee754/ldbl-128ibm/s_ceill.c (__ceill): Add high part
to itself when zero or not finite.
* sysdeps/ieee754/ldbl-128ibm/s_floorl.c (__floorl): Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_rintl.c (__rintl): Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_roundl.c (__roundl): Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_truncl.c (__truncl): Likewise.
The ldbl-128ibm implementation of sqrtl wrongly returns an sNaN for
signaling NaN arguments. This patch fixes it to quiet its argument,
using the same x * x + x return for infinities and NaNs as the dbl-64
implementation uses to ensure that +Inf maps to +Inf while -Inf and
NaN map to NaN.
Tested for powerpc.
[BZ #20153]
* sysdeps/ieee754/ldbl-128ibm/e_sqrtl.c (__ieee754_sqrtl): Return
x * x + x for infinities and NaNs.
The ldbl-128 implementations of j0l, j1l, y0l, y1l (also used for
ldbl-128ibm) return an sNaN argument unchanged. This patch fixes them
to add a NaN argument to itself to quiet it before return.
Tested for mips64.
[BZ #20151]
* sysdeps/ieee754/ldbl-128/e_j0l.c (__ieee754_j0l): Add NaN
argument to itself before returning result.
(__ieee754_y0l): Likewise.
* sysdeps/ieee754/ldbl-128/e_j1l.c (__ieee754_j1l): Likewise.
(__ieee754_y1l).
This patch adds more tests of signaling NaN inputs to libm-test.inc.
These tests are for a subset of functions with a single floating-point
input where no failures appeared in x86_64 or x86 testing. I intend
to investigate any failures of these new tests on some other
architectures before dealing with other functions.
Tested for x86_64 and x86.
* math/libm-test.inc (acosh_test_data): Add sNaN tests.
(atan_test_data): Likewise.
(ceil_test_data): Likewise.
(cos_test_data): Likewise.
(cosh_test_data): Likewise.
(erf_test_data): Likewise.
(exp2_test_data): Likewise.
(fabs_test_data): Likewise.
(floor_test_data): Likewise.
(ilogb_test_data): Likewise.
(j0_test_data): Likewise.
(j1_test_data): Likewise.
(jn_test_data): Likewise.
(lgamma_test_data): Likewise.
(lrint_test_data): Likewise.
(llrint_test_data): Likewise.
(logb_test_data): Likewise.
(lround_test_data): Likewise.
(llround_test_data): Likewise.
(nearbyint_test_data): Likewise.
(rint_test_data): Likewise.
(round_test_data): Likewise.
(sin_test_data): Likewise.
(sincos_test_data): Likewise.
(sinh_test_data): Likewise.
(sqrt_test_data): Likewise.
(tan_test_data): Likewise.
(tanh_test_data): Likewise.
(tgamma_test_data): Likewise.
(trunc_test_data): Likewise.
(y0_test_data): Likewise.
(y1_test_data): Likewise.
(yn_test_data): Likewise.
This patch adds support in libm-test.inc for tests with signaling NaN
arguments. gen-libm-test.pl is made to set a flag TEST_SNAN for such
tests, so that they can be disabled automatically when sNaN testing
isn't supported for a given type (at present, for float and double on
32-bit x86 because it's unpredictable when a value might be loaded
into a floating-point register and so automatically converted to long
double with sNaNs converted to quiet NaNs). -fsignaling-nans is used
where needed.
Tests are added for classification macros, as a starting point; this
is deliberately more conservative than Thomas's patch
<https://sourceware.org/ml/libc-ports/2013-04/msg00008.html>, to allow
more tests to be added, and issues exposed fixed, bit by bit.
Tested for x86_64 and x86.
* math/libm-test.inc: Update comment about NaN testing.
(TEST_SNAN): New macro.
(snan_value): Likewise.
(enable_test): Disable tests of sNaNs when SNAN_TESTS fails.
(fpclassify_test_data): Add sNaN tests.
(isfinite_test_data): Likewise.
(isinf_test_data): Likewise.
(isnan_test_data): Likewise.
(isnormal_test_data): Likewise.
(issignaling_test_data): Likewise.
(signbit_test_data): Likewise.
* math/gen-libm-test.pl (%beautify): Add snan_value.
(show_exceptions): Add argument $test_snan.
(parse_args): Handle snan_value as non-finite. Update call to
show_exceptions.
* math/Makefile (libm-test-no-inline-cflags): Add
-fsignaling-nans.
This patch fixes wrong/missing bits from the Fix {recv,send}{m}msg
standard compliance (BZ#16919) patches:
* nptl/Makefile sets CFLAGS-oldrecvfrom.c, but there's no such file as
oldrecvfrom.c. It should be oldsendmsg.c as defined by ChangeLog.
* sysdeps/unix/sysv/linux/hppa/Versions and
sysdeps/unix/sysv/linux/i386/Versions list a symbol recvms instead of
recvmsg at version GLIBC_2.24.
* nptl/Makefile (CFLAGS-oldrecvfrom.c): Remove rule.
(CFLAGS-oldsendmsg.c): Add rule.
* sysdeps/unix/sysv/linux/hppa/Versions [libc] (GLIBC_2.24):
Correct recvmsg symbol name.
* sysdeps/unix/sysv/linux/i386/Versions [libc] (GLIBC_2.24):
Likewise.
POSIX specifies that both msghdr::msg_iovlen and msghdr::msg_controllen
to be of size int and socklen_t respectively, however Linux implements
it as a size_t. So for 64-bits architecture where sizeof of size_t is
larger than socklen_t, both sendmmsg and recvmmsg need to adjust the
mmsghdr::msg_hdr internal fields before issuing the syscall itself.
This patch fixes it by operating on the padding if it the case.
For recvmmsg, the most straightfoward case, only zero padding the fields
is suffice. However, for sendmmsg, where adjusting the buffer is out
of the contract (since it may point to a read-only data), the function
is rewritten to use sendmsg instead (which from previous patch
allocates a temporary msghdr to operate on).
Also for 64-bit ports that requires it, a new recvmmsg and sendmmsg
compat version is created (which uses size_t for both cmsghdr::cmsg_len
and internal
Tested on x86_64, i686, aarch64, armhf, and powerpc64le.
* sysdeps/unix/sysv/linux/Makefile
[$(subdir) = socket] (sysdep_routines): Add oldrecvmmsg and
oldsendmmsg.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Add recvmmsg and
sendmmsg.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/oldrecvmmsg.c: New file.
* sysdeps/unix/sysv/linux/oldsendmmsg.c: Likewise.
* sysdeps/unix/sysv/linux/recvmmsg.c (__recvmmsg): Adjust msghdr
iovlen and controllen fields to adjust to POSIX specification.
* sysdeps/unix/sysv/linux/sendmmsg.c (__sendmmsg): Likewise.
Continuing fixes for ceil, floor and trunc functions not to raise the
"inexact" exception, this patch fixes the versions used on older
powerpc64 processors. As was done with the round implementations some
time ago, the save of floating-point state is moved after the first
floating-point operation on the input to ensure that any "invalid"
exception from signaling NaN input is included in the saved state, and
then the whole state gets restored rather than just the rounding mode.
This has no effect on configurations using the power5+ code, since
such processors can do these operations with a single instruction (and
those instructions do not set "inexact", so are correct for TS 18661-1
semantics).
Tested for powerpc64.
[BZ #15479]
* sysdeps/powerpc/powerpc64/fpu/s_ceil.S (__ceil): Move save of
floating-point state after first floating-point operation on
input. Restore full floating-point state instead of just rounding
mode.
* sysdeps/powerpc/powerpc64/fpu/s_ceilf.S (__ceilf): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_floor.S (__floor): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_floorf.S (__floorf): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_trunc.S (__trunc): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_truncf.S (__truncf): Likewise.
Continuing fixes for ceil, floor and trunc functions not to raise the
"inexact" exception, this patch fixes the versions used on older
powerpc32 processors. As was done with the round implementations some
time ago, the save of floating-point state is moved after the first
floating-point operation on the input to ensure that any "invalid"
exception from signaling NaN input is included in the saved state, and
then the whole state gets restored rather than just the rounding mode.
This has no effect on configurations using the power5+ code, since
such processors can do these operations with a single instruction (and
those instructions do not set "inexact", so are correct for TS 18661-1
semantics).
Tested for powerpc32.
[BZ #15479]
* sysdeps/powerpc/powerpc32/fpu/s_ceil.S (__ceil): Move save of
floating-point state after first floating-point operation on
input. Restore full floating-point state instead of just rounding
mode.
* sysdeps/powerpc/powerpc32/fpu/s_ceilf.S (__ceilf): Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_floor.S (__floor): Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_floorf.S (__floorf): Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_trunc.S (__trunc): Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_truncf.S (__truncf): Likewise.
According to the latest Unicode standard, a conversion from/to UTF-xx has
to report an error if the character value is in range of an utf16 surrogate
(0xd800..0xdfff). See https://sourceware.org/ml/libc-help/2015-12/msg00015.html.
Thus this patch fixes this behaviour for converting from utf32 to internal and
from internal to utf8.
Furthermore the conversion from utf16 to internal does not report an error if the
input-stream consists of two low-surrogate values. If an uint16_t value is in the
range of 0xd800 .. 0xdfff, the next uint16_t value is checked, if it is in the
range of a low surrogate (0xdc00 .. 0xdfff). Afterwards these two uint16_t
values are interpreted as a high- and low-surrogates pair. But there is no test
if the first uint16_t value is really in the range of a high-surrogate
(0xd800 .. 0xdbff). If there would be two uint16_t values in the range of a low
surrogate, then they will be treated as a valid high- and low-surrogates pair.
This patch adds this test.
This patch also adds a new testcase, which checks UTF conversions with input
values in range of UTF16 surrogates. The test converts from UTF-xx to INTERNAL,
INTERNAL to UTF-xx and directly between UTF-xx to UTF-yy. The latter conversion
is needed because s390 has iconv-modules, which converts from/to UTF in one step.
The new testcase was tested on a s390, power and intel machine.
ChangeLog:
[BZ #19727]
* iconvdata/utf-16.c (BODY): Report an error if first word is not a
valid high surrogate.
* iconvdata/utf-32.c (BODY): Report an error if the value is in range
of an utf16 surrogate.
* iconv/gconv_simple.c (BODY): Likewise.
* iconvdata/bug-iconv12.c: New file.
* iconvdata/Makefile (tests): Add bug-iconv12.
rename test
When converting from UCS4LE to INTERNAL, the input-value is checked for a too
large value and the iconv() call sets errno to EILSEQ. In this case the inbuf
argument of the iconv() call should point to the invalid character, but it
points to the beginning of the inbuf.
Thus this patch updates the pointers inptrp and outptrp before returning in
this error case.
This patch also adds a new testcase for this issue.
The new test was tested on a s390, power, intel machine.
ChangeLog:
[BZ #19726]
* iconv/gconv_simple.c (ucs4le_internal_loop): Update inptrp and
outptrp in case of an illegal input.
* iconv/tst-iconv6.c: New file.
* iconv/Makefile (tests): Add tst-iconv6.
According to the latest Unicode standard, a conversion from/to UTF-xx has
to report an error if the character value is in range of an utf16 surrogate
(0xd800..0xdfff). See https://sourceware.org/ml/libc-help/2015-12/msg00015.html.
Thus the cu42 instruction, which converts from utf32 to utf16, has to be
disabled because it does not report an error in case of a value in range of
a low surrogate (0xdc00..0xdfff). The etf3eh variant is removed and the c,
vector variant is adjusted to handle the value in range of an utf16 low
surrogate correctly.
ChangeLog:
* sysdeps/s390/utf16-utf32-z9.c: Disable cu42 instruction and report
an error in case of a value in range of an utf16 low surrogate.
According to the latest Unicode standard, a conversion from/to UTF-xx has
to report an error if the character value is in range of an utf16 surrogate
(0xd800..0xdfff). See https://sourceware.org/ml/libc-help/2015-12/msg00015.html.
Thus the cu41 instruction, which converts from utf32 to utf8, has to be
disabled because it does not report an error in case of a value in range of
a low surrogate (0xdc00..0xdfff). The etf3eh variant is removed and the c,
vector variant is adjusted to handle the value in range of an utf16 low
surrogate correctly.
ChangeLog:
* sysdeps/s390/utf8-utf32-z9.c: Disable cu41 instruction and report
an error in case of a value in range of an utf16 low surrogate.
This patch reworks the existing s390 64bit specific iconv modules in order
to use them on s390 31bit, too.
Thus the parts for subdirectory iconvdata in sysdeps/s390/s390-64/Makefile
were moved to sysdeps/s390/Makefile so that they apply on 31bit, too.
All those modules are moved from sysdeps/s390/s390-64 directory to sysdeps/s390.
The iso-8859-1 to/from cp037 module was adjusted, to use brct (branch relative
on count) instruction on 31bit s390 instead of brctg, because the brctg is a
zarch instruction and is not available on a 31bit kernel.
The utf modules are using zarch instructions, thus the directive machinemode
zarch_nohighgprs was added to the inline assemblies to omit the high-gprs flag
in the shared libraries. Otherwise they can't be loaded on a 31bit kernel.
The ifunc resolvers were adjusted in order to call the etf3eh or vector variants
only if zarch instructions are available (64bit kernel in 31bit compat-mode).
Furthermore some variable types were changed. E.g. unsigned long long would be
a register pair on s390 31bit, but we want only one single register.
For variables of type size_t the register contents have to be enlarged from a
32bit to a 64bit value on 31bit, because the inline assemblies uses 64bit values
in such cases.
ChangeLog:
* sysdeps/s390/s390-64/Makefile (iconvdata-subdirectory):
Move to ...
* sysdeps/s390/Makefile: ... here.
* sysdeps/s390/s390-64/iso-8859-1_cp037_z900.c: Move to ...
* sysdeps/s390/iso-8859-1_cp037_z900.c: ... here.
(BRANCH_ON_COUNT): New define.
(TR_LOOP): Use BRANCH_ON_COUNT instead of brctg.
* sysdeps/s390/s390-64/utf16-utf32-z9.c: Move to ...
* sysdeps/s390/utf16-utf32-z9.c: ... here and adjust to
run on s390-32, too.
* sysdeps/s390/s390-64/utf8-utf16-z9.c: Move to ...
* sysdeps/s390/utf8-utf16-z9.c: ... here and adjust to
run on s390-32, too.
* sysdeps/s390/s390-64/utf8-utf32-z9.c: Move to ...
* sysdeps/s390/utf8-utf32-z9.c: ... here and adjust to
run on s390-32, too.
This patch reworks the s390 specific module to convert between utf16 and utf32.
Now ifunc is used to choose either the c or etf3eh (with convert utf
instruction) variants at runtime.
Furthermore a new vector variant for z13 is introduced which will be build
and chosen if vector support is available at build / runtime.
In case of converting utf 32 to utf16, the vector variant optimizes input of
2byte utf16 characters. The convert utf instruction is used if an utf16
surrogate is found.
For the other direction utf16 to utf32, the cu24 instruction can't be re-
enabled, because it does not report an error, if the input-stream consists of
a single low surrogate utf16 char (e.g. 0xdc00). This applies to the newest z13,
too. Thus there is only the c or the new vector variant, which can handle utf16
surrogate characters.
This patch also fixes some whitespace errors. Furthermore, the etf3eh variant is
handling the "UTF-xx//IGNORE" case now. Before they ignored the ignore-case and
always stopped at an error.
ChangeLog:
* sysdeps/s390/s390-64/utf16-utf32-z9.c: Use ifunc to select c,
etf3eh or new vector loop-variant.
This patch reworks the s390 specific module to convert between utf8 and utf16.
Now ifunc is used to choose either the c or etf3eh (with convert utf instruction)
variants at runtime. Furthermore a new vector variant for z13 is introduced
which will be build and chosen if vector support is available at build / runtime.
In case of converting utf 8 to utf16, the vector variant optimizes input of
1byte utf8 characters. The convert utf instruction is used if a multibyte utf8
character is found.
For the other direction utf16 to utf8, the cu21 instruction can't be re-enabled,
because it does not report an error, if the input-stream consists of a single
low surrogate utf16 char (e.g. 0xdc00). This applies to the newest z13, too.
Thus there is only the c or the new vector variant, which can handle 1..4 byte
utf8 characters.
The c variant from utf16 to utf8 has beed fixed. If a high surrogate was at the
end of the input-buffer, then errno was set to EINVAL and the input-pointer
pointed just after the high surrogate. Now it points to the beginning of the
high surrogate.
This patch also fixes some whitespace errors. The c variant from utf8 to utf16
is now checking that tail-bytes starts with 0b10... and the value is not in
range of an utf16 surrogate.
Furthermore, the etf3eh variants are handling the "UTF-xx//IGNORE" case now.
Before they ignored the ignore-case and always stopped at an error.
ChangeLog:
* sysdeps/s390/s390-64/utf8-utf16-z9.c: Use ifunc to select c,
etf3eh or new vector loop-variant.
This patch reworks the s390 specific module to convert between utf8 and utf32.
Now ifunc is used to choose either the c or etf3eh (with convert utf
instruction) variants at runtime.
Furthermore a new vector variant for z13 is introduced which will be build
and chosen if vector support is available at build / runtime.
The vector variants optimize input of 1byte utf8 characters. The convert utf
instruction is used if a multibyte utf8 character is found.
This patch also fixes some whitespace errors. The c variants are rejecting
UTF-16 surrogates and values above 0x10ffff now.
Furthermore, the etf3eh variants are handling the "UTF-xx//IGNORE" case now.
Before they ignored the ignore-case and always stopped at an error.
ChangeLog:
* sysdeps/s390/s390-64/utf8-utf32-z9.c: Use ifunc to select c, etf3eh
or new vector loop-variant.
This patch reworks the s390 specific module which used the z900
translate one to one instruction. Now the g5 translate instruction is used,
because it outperforms the troo instruction.
ChangeLog:
* sysdeps/s390/s390-64/iso-8859-1_cp037_z900.c (TROO_LOOP):
Rename to TR_LOOP and usage of tr instead of troo instruction.
This patch introduces a s390 specific gconv_simple.c file which provides
optimized versions for z13 with vector instructions, which will be chosen at
runtime via ifunc.
The optimized conversions can convert between internal and ascii, ucs4, ucs4le,
ucs2, ucs2le.
If the build-environment lacks vector support, then iconv/gconv_simple.c
is used wihtout any change. Otherwise iconvdata/gconv_simple.c is used to create
conversion loop routines without vector instructions as fallback, if vector
instructions aren't available at runtime.
ChangeLog:
* sysdeps/s390/multiarch/gconv_simple.c: New File.
* sysdeps/s390/multiarch/Makefile (sysdep_routines): Add gconv_simple.
This patch introduces a s390 specific 8bit-generic.c file which provides an
optimized version for z13 with translate-/vector-instructions, which will be
chosen at runtime via ifunc.
If the build-environment lacks vector support, then iconvdata/8bit-generic.c
is used wihtout any change. Otherwise iconvdata/8bit-generic.c is used to create
conversion loop routines without vector instructions as fallback, if vector
instructions aren't available at runtime.
The vector routines can only be used with charsets where the maximum UCS4 value
fits in 1 byte size. Then the hardware translate-instruction is used
to translate between up to 256 generic characters and "1 byte UCS4"
characters at once. The vector instructions are used to convert between
the "1 byte UCS4" and UCS4.
The gen-8bit.sh script in sysdeps/s390/multiarch generates the conversion
table to_ucs1. Therefore in sysdeps/s390/multiarch/Makefile is added an
override define generate-8bit-table, which is originally defined in
iconvdata/Makefile. This version calls the gen-8bit.sh in iconvdata folder
and the s390 one.
ChangeLog:
* sysdeps/s390/multiarch/8bit-generic.c: New File.
* sysdeps/s390/multiarch/gen-8bit.sh: New File.
* sysdeps/s390/multiarch/Makefile (generate-8bit-table):
New override define.
* sysdeps/s390/multiarch/iconv/skeleton.c: Likewise.
The S390 specific test checks if the gcc has support for vector registers
by compiling an inline assembly which clobbers vector registers.
On success the macro HAVE_S390_VX_GCC_SUPPORT is defined.
This macro can be used to determine if e.g. clobbering vector registers
is allowed or not.
ChangeLog:
* config.h.in (HAVE_S390_VX_GCC_SUPPORT): New macro undefine.
* sysdeps/s390/configure.ac: Add test for S390 vector register
support in gcc.
* sysdeps/s390/configure: Regenerated.
This patch introduces a way to provide an architecture dependent gconv-modules
file. Before this patch, the gconv-modules file was normally installed from
src-dir/iconvdata/gconv-modules. The S390 Makefile had overridden the
installation recipe (with a make warning) in order to install the
gconv-module-s390 file from build-dir.
The iconvdata/Makefile provides another recipe, which copies the gconv-modules
file from src to build dir, which are used by the testcases.
Thus the testcases does not use the currently build s390-modules.
This patch uses build-dir/iconvdata/gconv-modules for installation, which
is generated by concatenating src-dir/iconvdata/gconv-modules and the
architecture specific one. The latter one can be specified by setting the variable
sysdeps-gconv-modules in sysdeps/.../Makefile.
The architecture specific gconv-modules file is emitted before the common one
because these modules aren't used in all possible conversions. E.g. the converting
from INTERNAL to UTF-16 used the common UTF-16.so module instead of UTF16_UTF32_Z9.so.
This way, the s390-Makefile does not need to override the recipe for gconv-modules
and no warning is emitted anymore.
Since we no longer support empty objpfx the conditional test in iconvdata/Makefile
is removed.
ChangeLog:
* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules):
Install file from $(objpfx)gconv-modules.
($(objpfx)gconv-modules): Concatenate architecture specific file
in variable sysdeps-gconv-modules and gconv-modules in src dir.
* sysdeps/s390/gconv-modules: New file.
* sysdeps/s390/s390-64/Makefile: ($(inst_gconvdir)/gconv-modules):
Deleted.
($(objpfx)gconv-modules-s390): Deleted.
(sysdeps-gconv-modules): New variable.
Continuing fixes for ceil and floor functions not to raise the
"inexact" exception, this patch fixes the x86_64 SSE4.1 versions. The
roundss / roundsd instructions take an immediate operand that
determines the rounding mode and whether to raise "inexact"; this just
needs bit 3 set to disable "inexact", which this patch does.
Remark: we don't have an SSE4.1 version of trunc / truncf (using this
instruction with operand 11); I'd expect one to make sense, but of
course it should be benchmarked against the existing C code. I'll
file a bug in Bugzilla for the lack of such a version.
Tested for x86_64.
[BZ #15479]
* sysdeps/x86_64/fpu/multiarch/s_ceil.S (__ceil_sse41): Set bit 3
of immediate operand to rounding instruction.
* sysdeps/x86_64/fpu/multiarch/s_ceilf.S (__ceilf_sse41):
Likewise.
* sysdeps/x86_64/fpu/multiarch/s_floor.S (__floor_sse41):
Likewise.
* sysdeps/x86_64/fpu/multiarch/s_floorf.S (__floorf_sse41):
Likewise.
This file is partially generated. To make updates a little
simpler, I have moved the generated code into a partially
contained header to simplify regeneration.
gen-tst-strtod-round.c now takes two, mandatory arguments.
These arguments specify the input test data and the output
destination, respectively.
C99 and C11 allow but do not require ceil, floor, round and trunc to
raise the "inexact" exception for noninteger arguments. TS 18661-1
requires that this exception not be raised by these functions. This
aligns them with general IEEE semantics, where "inexact" is only
raised if the final step of rounding the infinite-precision result to
the result type is inexact; for these functions, the
infinite-precision integer result is always representable in the
result type, so "inexact" should never be raised.
The generic implementations of ceil, floor and round functions contain
code to force "inexact" to be raised. This patch removes it for round
functions to align them with TS 18661-1 in this regard. The tests
*are* updated by this patch; there are fewer architecture-specific
versions than for ceil and floor, and I fixed the powerpc ones some
time ago. If any others still have the issue, as shown by tests for
round failing with spurious exceptions, they can be fixed separately
by architecture maintainers or others.
Tested for x86_64, x86 and mips64.
[BZ #15479]
* sysdeps/ieee754/dbl-64/s_round.c (huge): Remove variable.
(__round): Do not force "inexact" exception.
* sysdeps/ieee754/dbl-64/wordsize-64/s_round.c (huge): Remove
variable.
(__round): Do not force "inexact" exception.
* sysdeps/ieee754/flt-32/s_roundf.c (huge): Remove variable.
(__roundf): Do not force "inexact" exception.
* sysdeps/ieee754/ldbl-128/s_roundl.c (huge): Remove variable.
(__roundl): Do not force "inexact" exception.
* sysdeps/ieee754/ldbl-96/s_roundl.c (huge): Remove variable.
(__roundl): Do not force "inexact" exception.
* math/libm-test.inc (round_test_data): Do not allow spurious
"inexact" exceptions.
C99 and C11 allow but do not require ceil, floor, round and trunc to
raise the "inexact" exception for noninteger arguments. TS 18661-1
requires that this exception not be raised by these functions. This
aligns them with general IEEE semantics, where "inexact" is only
raised if the final step of rounding the infinite-precision result to
the result type is inexact; for these functions, the
infinite-precision integer result is always representable in the
result type, so "inexact" should never be raised.
The generic implementations of ceil, floor and round functions contain
code to force "inexact" to be raised. This patch removes it for floor
functions to align them with TS 18661-1 in this regard. Note that
some architecture-specific versions may still raise "inexact", so the
tests are not updated and the bug is not yet fixed.
Tested for x86_64, x86 and mips64.
[BZ #15479]
* sysdeps/ieee754/dbl-64/s_floor.c: Do not mention "inexact"
exception in comment.
(huge): Remove variable.
(__floor): Do not force "inexact" exception.
* sysdeps/ieee754/dbl-64/wordsize-64/s_floor.c: Do not mention
"inexact" exception in comment.
(huge): Remove variable.
(__floor): Do not force "inexact" exception.
* sysdeps/ieee754/flt-32/s_floorf.c: Do not mention "inexact"
exception in comment.
(huge): Remove variable.
(__floorf): Do not force "inexact" exception.
* sysdeps/ieee754/ldbl-128/s_floorl.c: Do not mention "inexact"
exception in comment.
(huge): Remove variable.
(__floorl): Do not force "inexact" exception.
C99 and C11 allow but do not require ceil, floor, round and trunc to
raise the "inexact" exception for noninteger arguments. TS 18661-1
requires that this exception not be raised by these functions. This
aligns them with general IEEE semantics, where "inexact" is only
raised if the final step of rounding the infinite-precision result to
the result type is inexact; for these functions, the
infinite-precision integer result is always representable in the
result type, so "inexact" should never be raised.
The generic implementations of ceil, floor and round functions contain
code to force "inexact" to be raised. This patch removes it for ceil
functions to align them with TS 18661-1 in this regard. Note that
some architecture-specific versions may still raise "inexact", so the
tests are not updated and the bug is not yet fixed.
Tested for x86_64, x86 and mips64.
[BZ #15479]
* sysdeps/ieee754/dbl-64/s_ceil.c: Do not mention "inexact"
exception in comment.
(huge): Remove variable.
(__ceil): Do not force "inexact" exception.
* sysdeps/ieee754/dbl-64/wordsize-64/s_ceil.c: Do not mention
"inexact" exception in comment.
(huge): Remove variable.
(__ceil): Do not force "inexact" exception.
* sysdeps/ieee754/flt-32/s_ceilf.c (huge): Remove variable.
(__ceilf): Do not force "inexact" exception.
* sysdeps/ieee754/ldbl-128/s_ceill.c: Do not mention "inexact"
exception in comment.
(huge): Remove variable.
(__ceill): Do not force "inexact" exception.
When --enable-bind-now is used to configure glibc build, we can avoid
an extra branch to the PLT entry by using indirect branch via the GOT
slot instead, which is similar to the first instructuon in the PLT
entry. Changes in the shared library sizes in text sections:
Shared library Before (bytes) After (bytes)
libm.so 1060813 1060797
libmvec.so 160881 160805
libpthread.so 94992 94984
librt.so 25064 25048
* config.h.in (BIND_NOW): New.
* configure.ac (BIND_NOW): New. Defined for --enable-bind-now.
* configure: Regenerated.
* sysdeps/x86_64/sysdep.h (JUMPTARGET)[BIND_NOW]: Defined to
indirect branch via the GOT slot.
There exist optimized memcpy functions on s390, but no optimized mempcpy.
This patch adds mempcpy entry points in memcpy.S files, which
use the memcpy implementation. Now mempcpy itself is also an IFUNC function
as memcpy is and the variants are listed in ifunc-impl-list.c.
The s390 string.h does not define _HAVE_STRING_ARCH_mempcpy.
Instead mempcpy string/string.h inlines memcpy() + n.
If n is constant and small enough, GCC emits instructions like mvi or mvc
and avoids the function call to memcpy.
If n is not constant, then memcpy is called and n is added afterwards.
If _HAVE_STRING_ARCH_mempcpy would be defined, mempcpy would be called in
every case.
According to PR70140 "Inefficient expansion of __builtin_mempcpy"
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=70140) GCC should handle a
call to mempcpy in the same way as memcpy. Then either the mempcpy macro
in string/string.h has to be removed or _HAVE_STRING_ARCH_mempcpy has to
be defined for S390.
ChangeLog:
[BZ #19765]
* sysdeps/s390/mempcpy.S: New File.
* sysdeps/s390/multiarch/mempcpy.c: Likewise.
* sysdeps/s390/multiarch/Makefile (sysdep_routines): Add mempcpy.
* sysdeps/s390/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list):
Add mempcpy variants.
* sysdeps/s390/s390-32/memcpy.S: Add mempcpy entry point.
(memcpy): Adjust to be usable from mempcpy entry point.
(__memcpy_mvcle): Likewise.
* sysdeps/s390/s390-64/memcpy.S: Likewise.
* sysdeps/s390/s390-32/multiarch/memcpy-s390.S: Add entry points
____mempcpy_z196, ____mempcpy_z10 and add __GI_ symbols for mempcpy.
(__memcpy_z196): Adjust to be usable from mempcpy entry point.
(__memcpy_z10): Likewise.
* sysdeps/s390/s390-64/multiarch/memcpy-s390x.S: Likewise.
On s390, the memcpy, memcmp, memset functions are IFUNC symbols,
which are created with s390_libc_ifunc-macro.
This macro creates a __GI_ symbol which is set to the
ifunced symbol. Thus calls within libc.so to e.g. memcpy
result in a call to *ABS*+0x954c0@plt stub and afterwards
to the resolved memcpy-ifunc-variant.
This patch sets the __GI_ symbol to the default-ifunc-variant
to avoid the plt call. The __GI_ symbols are now created at the
default variant of ifunced function.
ChangeLog:
* sysdeps/s390/multiarch/ifunc-resolve.h (s390_libc_ifunc):
Remove __GI_ symbol.
* sysdeps/s390/s390-32/multiarch/memcmp-s390.S: Add __GI_memcmp symbol.
* sysdeps/s390/s390-64/multiarch/memcmp-s390x.S: Likewise.
* sysdeps/s390/s390-32/multiarch/memcpy-s390.S: Add __GI_memcpy symbol.
* sysdeps/s390/s390-64/multiarch/memcpy-s390x.S: Likewise.
* sysdeps/s390/s390-32/multiarch/memset-s390.S: Add __GI_memset symbol.
* sysdeps/s390/s390-64/multiarch/memset-s390x.S: Likewise.
The __memcpy_default variant on s390 64bit calculates the number of
256byte blocks in a 64bit register and checks, if they exceed 1MB
to jump to mvcle. Otherwise a mvc-loop is used. The compare-instruction
only checks a 32bit value.
This patch uses a 64bit compare.
ChangeLog:
* sysdeps/s390/s390-64/memcpy.S (memcpy):
Use cghi instead of chi to compare 64bit value.
If more than 255 bytes should be copied, the algorithm jumps away.
Before this patch, it jumps to the mvc-loop (.L_G5_12).
Now it jumps first to the "> 1MB" check, which jumps away to
__memcpy_mvcle. Otherwise, the mvc-loop (.L_G5_12) copies the bytes.
ChangeLog:
* sysdeps/s390/s390-32/memcpy.S (memcpy):
Jump to 1MB check before executing mvc-loop.
After the heap rewriting added in commit
4cf6c72fd2 (malloc: Rewrite dumped heap
for compatibility in __malloc_set_state), we can change malloc alignment
for new allocations because the alignment of old allocations no longer
matters.
We need to increase the malloc state version number, so that binaries
containing dumped heaps of the new layout will not try to run on
previous versions of glibc, resulting in obscure crashes.
This commit addresses a failure of tst-malloc-thread-fail on the
affected architectures (32-bit ppc and mips) because the test checks
pointer alignment.
The call is technically in a loop, and under certain circumstances
(which are quite difficult to reproduce in a test case), alloca
can be invoked repeatedly during a single call to clntudp_call.
As a result, the available stack space can be exhausted (even
though individual alloca sizes are bounded implicitly by what
can fit into a UDP packet, as a side effect of the earlier
successful send operation).
This avoids aliasing issues with GCC 6 in -fno-strict-aliasing
mode. (With implicit padding, not all data is copied.)
This change makes it explicit that struct sockaddr_storage is
only 126 bytes large on m68k (unlike elsewhere, where we end up
with the requested 128 bytes). The new test case makes sure that
this does not happen on other architectures.
The conform/ test of limits.h namespace for XPG3 was failing because
of NL_* and NZERO defines. Those symbols are EX-shaded, not
UX-shaded, so it's correct for them to be defined for XPG3; this patch
corrects the expectations accordingly. (Actually it looks like they
should not be listed as optional for these standards, but that's
another matter.)
Tested for x86_64 and x86.
* conform/data/limits.h-data (CHARCLASS_NAME_MAX): Also expect for
[XPG3 || XPG4].
(NL_ARGMAX): Also expect for [XPG3].
(NL_LANGMAX): Likewise.
(NL_MSGMAX): Likewise.
(NL_NMAX): Likewise.
(NL_SETMAX): Likewise.
(NL_TEXTMAX): Likewise.
(NZERO): Likewise.
(TMP_MAX): Likewise.
* conform/Makefile (test-xfail-XPG3/limits.h/conform): Remove
variable.
