* sysdeps/riscv/rv64/rvd/libm-test-ulps: Update.
Note: I regen'd these from scratch, but I'm only committing the
increases, as I only tested on hardware. There were a few 2->1
decreases that I omitted, possibly "for now".
* sysdeps/riscv/rvf/math_private.h (libc_feholdexcept_setround_riscv):
Fix rounding save-restore bug.
Fixes about a hundred off-by-ULP failures in the math testsuite.
Continuing moving macros out of math-tests.h to smaller headers
following typo-proof conventions instead of using #ifndef, this patch
moves SNAN_TESTS_PRESERVE_PAYLOAD out to its own sysdeps header.
Tested with build-many-glibcs.py.
* sysdeps/generic/math-tests-snan-payload.h: New file.
* sysdeps/hppa/math-tests-snan-payload.h: Likewise.
* sysdeps/mips/math-tests-snan-payload.h: Likewise.
* sysdeps/riscv/math-tests-snan-payload.h: Likewise.
* sysdeps/generic/math-tests.h: Include
<math-tests-snan-payload.h>.
(SNAN_TESTS_PRESERVE_PAYLOAD): Do not define macro here.
* sysdeps/hppa/math-tests.h: Remove file.
* sysdeps/mips/math-tests.h [!__mips_nan2008]
(SNAN_TESTS_PRESERVE_PAYLOAD): Do not define macro here.
* sysdeps/riscv/math-tests.h (SNAN_TESTS_PRESERVE_PAYLOAD):
Likewise.
Wrap symbol address run-time calculation into a macro and use it
throughout, replacing inline calculations.
There are a couple of variants, most of them different in a functionally
insignificant way. Most calculations are right following RESOLVE_MAP,
at which point either the map or the symbol returned can be checked for
validity as the macro sets either both or neither. In some places both
the symbol and the map has to be checked however.
My initial implementation therefore always checked both, however that
resulted in code larger by as much as 0.3%, as many places know from
elsewhere that no check is needed. I have decided the size growth was
unacceptable.
Having looked closer I realized that it's the map that is the culprit.
Therefore I have modified LOOKUP_VALUE_ADDRESS to accept an additional
boolean argument telling it to access the map without checking it for
validity. This in turn has brought quite nice results, with new code
actually being smaller for i686, and MIPS o32, n32 and little-endian n64
targets, unchanged in size for x86-64 and, unusually, marginally larger
for big-endian MIPS n64, as follows:
i686:
text data bss dec hex filename
152255 4052 192 156499 26353 ld-2.27.9000-base.so
152159 4052 192 156403 262f3 ld-2.27.9000-elf-symbol-value.so
MIPS/o32/el:
text data bss dec hex filename
142906 4396 260 147562 2406a ld-2.27.9000-base.so
142890 4396 260 147546 2405a ld-2.27.9000-elf-symbol-value.so
MIPS/n32/el:
text data bss dec hex filename
142267 4404 260 146931 23df3 ld-2.27.9000-base.so
142171 4404 260 146835 23d93 ld-2.27.9000-elf-symbol-value.so
MIPS/n64/el:
text data bss dec hex filename
149835 7376 408 157619 267b3 ld-2.27.9000-base.so
149787 7376 408 157571 26783 ld-2.27.9000-elf-symbol-value.so
MIPS/o32/eb:
text data bss dec hex filename
142870 4396 260 147526 24046 ld-2.27.9000-base.so
142854 4396 260 147510 24036 ld-2.27.9000-elf-symbol-value.so
MIPS/n32/eb:
text data bss dec hex filename
142019 4404 260 146683 23cfb ld-2.27.9000-base.so
141923 4404 260 146587 23c9b ld-2.27.9000-elf-symbol-value.so
MIPS/n64/eb:
text data bss dec hex filename
149763 7376 408 157547 2676b ld-2.27.9000-base.so
149779 7376 408 157563 2677b ld-2.27.9000-elf-symbol-value.so
x86-64:
text data bss dec hex filename
148462 6452 400 155314 25eb2 ld-2.27.9000-base.so
148462 6452 400 155314 25eb2 ld-2.27.9000-elf-symbol-value.so
[BZ #19818]
* sysdeps/generic/ldsodefs.h (LOOKUP_VALUE_ADDRESS): Add `set'
parameter.
(SYMBOL_ADDRESS): New macro.
[!ELF_FUNCTION_PTR_IS_SPECIAL] (DL_SYMBOL_ADDRESS): Use
SYMBOL_ADDRESS for symbol address calculation.
* elf/dl-runtime.c (_dl_fixup): Likewise.
(_dl_profile_fixup): Likewise.
* elf/dl-symaddr.c (_dl_symbol_address): Likewise.
* elf/rtld.c (dl_main): Likewise.
* sysdeps/aarch64/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/alpha/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/arm/dl-machine.h (elf_machine_rel): Likewise.
(elf_machine_rela): Likewise.
* sysdeps/hppa/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/hppa/dl-symaddr.c (_dl_symbol_address): Likewise.
* sysdeps/i386/dl-machine.h (elf_machine_rel): Likewise.
(elf_machine_rela): Likewise.
* sysdeps/ia64/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/m68k/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/microblaze/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/mips/dl-machine.h (ELF_MACHINE_BEFORE_RTLD_RELOC):
Likewise.
(elf_machine_reloc): Likewise.
(elf_machine_got_rel): Likewise.
* sysdeps/mips/dl-trampoline.c (__dl_runtime_resolve): Likewise.
* sysdeps/nios2/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/powerpc/powerpc64/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/riscv/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/s390/s390-32/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/s390/s390-64/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/sh/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/sparc/sparc32/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/sparc/sparc64/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/tile/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/x86_64/dl-machine.h (elf_machine_rela): Likewise.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
No glibc configuration uses the present debug/backtrace.c, whereas
several #include the x86_64 version. The x86_64 version is
effectively a generic one (using _Unwind_Backtrace from libgcc, which
works much more reliably than the built-in functions used by
debug/backtrace.c). This patch moves it to debug/backtrace.c and
removes all the #includes of the x86_64 version from other
architectures which are no longer required.
I do not know whether all the other architecture-specific backtrace
implementations that are based on _Unwind_Backtrace are required, or
whether, where their differences from the generic version do something
useful, suitable hooks could be added to the generic version to reduce
the duplication involved.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch.
* sysdeps/x86_64/backtrace.c: Move to ....
* debug/backtrace.c: ... here.
* sysdeps/aarch64/backtrace.c: Remove file.
* sysdeps/alpha/backtrace.c: Likewise.
* sysdeps/hppa/backtrace.c: Likewise.
* sysdeps/ia64/backtrace.c: Likewise.
* sysdeps/mips/backtrace.c: Likewise.
* sysdeps/nios2/backtrace.c: Likewise.
* sysdeps/riscv/backtrace.c: Likewise.
* sysdeps/sh/backtrace.c: Likewise.
* sysdeps/tile/backtrace.c: Likewise.
This patch lays out the top-level orginazition of the RISC-V port. It
contains all the Implies files as well as various other fragments of
build infastructure for the RISC-V port. This contains the only change
to a shared file: config.h.in.
RISC-V is a family of base ISAs with optional extensions. The base ISAs
are RV32I and RV64I, which are 32-bit and 64-bit integer-only ISAs, but
this port currently only supports RV64I based systems. Support for
RISC-V lives in in sysdeps/riscv. In addition to these ISAs, our glibc
port supports most of the currently-defined extensions: the A extension
for atomics, the M extension for multiplication, the C extension for
compressed instructions, and the F/D extensions for single/double
precision IEEE floating-point. Most of these extensions are handled by
GCC, but glibc defines various floating-point wrappers and emulation
routines as well as some atomic wrappers.
We support running glibc-based programs on Linux, the support for which
lives in sysdeps/unix/sysv/linux/riscv.
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* sysdeps/riscv/Implies: New file.
* sysdeps/riscv/Makefile: Likewise.
* sysdeps/riscv/configure: Likewise.
* sysdeps/riscv/configure.ac: Likewise.
* sysdeps/riscv/nptl/Makefile: Likewise.
* sysdeps/riscv/preconfigure: Likewise.
* sysdeps/riscv/rv64/Implies-after: Likewise.
* sysdeps/riscv/rv64/rvd/Implies: Likewise.
* sysdeps/riscv/rv64/rvf/Implies: Likewise.
* sysdeps/unix/sysv/linux/riscv/Implies: Likewise.
* sysdeps/unix/sysv/linux/riscv/Makefile: Likewise.
* sysdeps/unix/sysv/linux/riscv/Versions: Likewise.
* sysdeps/unix/sysv/linux/riscv/configure: Likewise.
* sysdeps/unix/sysv/linux/riscv/configure.ac: Likewise.
* sysdeps/unix/sysv/linux/riscv/ldd-rewrite.sed: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/Implies: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/Makefile: Likewise.
* sysdeps/unix/sysv/linux/riscv/shlib-versions: Likewise.
I started with the aarch64 ABI lists and manually went through each
difference, ensuring that the missing entries had been deprecated along
the line. Darius generated the ulps files by running the test cases on QEMU.
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* sysdeps/riscv/nofpu/libm-test-ulps: New file.
* sysdeps/riscv/nofpu/libm-test-ulps-name: Likewise.
* sysdeps/riscv/rv64/rvd/libm-test-ulps: Likewise.
* sysdeps/riscv/rv64/rvd/libm-test-ulps-name: Likewise.
* sysdeps/unix/sysv/linux/riscv/localplt.data: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/c++-types.data: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/ld.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libanl.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libdl.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libnsl.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/librt.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libutil.abilist: Likewise.
Contains the Linux system call interface, as well as the definitions of
a handful of system calls.
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* sysdeps/riscv/nptl/nptl-sysdep.S: New file.
* sysdeps/unix/sysv/linux/riscv/arch-fork.h: Likewise.
* sysdeps/unix/sysv/linux/riscv/clone.S: Likewise.
* sysdeps/unix/sysv/linux/riscv/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/riscv/pt-vfork.S: Likewise.
* sysdeps/unix/sysv/linux/riscv/syscall.c: Likewise.
* sysdeps/unix/sysv/linux/riscv/sysdep.S: Likewise.
* sysdeps/unix/sysv/linux/riscv/sysdep.h: Likewise.
* sysdeps/unix/sysv/linux/riscv/vfork.S: Likewise.
This patch implements various atomic and locking routines on RISC-V. We
mandate the A extension on Linux-capable RISC-V systems, so this can
rely on always having the various atomic instructions availiable.
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* sysdeps/riscv/nptl/bits/pthreadtypes-arch.h: New file.
* sysdeps/riscv/nptl/bits/semaphore.h: Likewise.
* sysdeps/riscv/nptl/libc-lowlevellock.c: Likewise.
* sysdeps/unix/sysv/linux/riscv/atomic-machine.h: Likewise.
This patch contains the miscellaneous math routines and headers we have
implemented for RISC-V. This includes things from <math.h> that aren't
completely ISA-generic, floating-point bit manipulation, and soft-fp
hooks.
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* sysdeps/riscv/bits/fenv.h: New file.
* sysdeps/riscv/e_sqrtl.c: Likewise.
* sysdeps/riscv/fpu_control.h: Likewise.
* sysdeps/riscv/math-tests.h: Likewise.
* sysdeps/riscv/nofpu/Implies: Likewise.
* sysdeps/riscv/sfp-machine.h: Likewise.
* sysdeps/riscv/tininess.h: Likewise.
This patch implements TLS support for RISC-V. We support all four
standard TLS addressing modes (LE, IE, LD, and GD) when running on
Linux via NPTL. There is a draft psABI document that defines our TLS
ABI here
https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md#thread-local-storage
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* sysdeps/riscv/dl-tls.h: New file.
* sysdeps/riscv/libc-tls.c: Likewise.
* sysdeps/riscv/nptl/tcb-offsets.sym: Likewise.
* sysdeps/riscv/nptl/tls.h: Likewise.
* sysdeps/riscv/stackinfo.h: Likewise.
This patch contains code that needs to directly know about the RISC-V
ABI, which is specified in a work-in-progress psABI document:
https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md
This is meant to contain all the RISC-V code that needs to explicitly
name registers or manage in-memory structure layout. This does not
contain any of the Linux-specific code.
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* sysdeps/riscv/__longjmp.S: New file.
* sysdeps/riscv/backtrace.c: Likewise.
* sysdeps/riscv/bits/endian.h: Likewise.
* sysdeps/riscv/bits/setjmp.h: Likewise.
* sysdeps/riscv/bits/wordsize.h: Likewise.
* sysdeps/riscv/bsd-_setjmp.c: Likewise.
* sysdeps/riscv/bsd-setjmp.c: Likewise.
* sysdeps/riscv/dl-trampoline.S: Likewise.
* sysdeps/riscv/gccframe.h: Likewise.
* sysdeps/riscv/jmpbuf-offsets.h: Likewise.
* sysdeps/riscv/jmpbuf-unwind.h: Likewise.
* sysdeps/riscv/machine-gmon.h: Likewise.
* sysdeps/riscv/memusage.h: Likewise.
* sysdeps/riscv/setjmp.S: Likewise.
* sysdeps/riscv/sys/asm.h: Likewise.
* sysdeps/riscv/tls-macros.h: Likewise.
