Save lr in a non-volatile register before scv in clone/clone3.
For clone, the non-volatile register was unused and already
saved/restored. Remove the dead code from clone.
Signed-off-by: Sachin Monga <smonga@linux.ibm.com>
Reviewed-by: Peter Bergner <bergner@linux.ibm.com>
There are no tests specifically focused on the functions time,
gettimeofday and clock_gettime, although there are some incidental
uses in tests of other functions. Add tests specifically for these
three functions.
Tested for x86_64 and x86.
There are various existing tests that call pthread_attr_init and then
verify properties of the resulting initial values retrieved with
pthread_attr_get* functions. However, those are missing coverage of
the initial values retrieved with pthread_attr_getschedparam and
pthread_attr_getstacksize. Add testing for initial values from those
functions as well.
(tst-attr2 covers pthread_attr_getdetachstate,
pthread_attr_getguardsize, pthread_attr_getinheritsched,
pthread_attr_getschedpolicy, pthread_attr_getscope. tst-attr3 covers
some of those together with pthread_attr_getaffinity_np.
tst-pthread-attr-sigmask covers pthread_attr_getsigmask_np.
pthread_attr_getstack has unspecified results if called before the
relevant attributes have been set, while pthread_attr_getstackaddr is
deprecated.)
Tested for x86_64.
The gilbc manual has some documentation in llio.texi of requirements
for moving between I/O on FILE * streams and file descriptors on the
same open file description.
The documentation of what must be done on a FILE * stream to move from
it to either a file descriptor or another FILE * for the same open
file description seems to match POSIX. However, there is an
additional requirement in POSIX on the *second* of the two handles
being moved between, which is not mentioned in the glibc manual: "If
any previous active handle has been used by a function that explicitly
changed the file offset, except as required above for the first
handle, the application shall perform an lseek() or fseek() (as
appropriate to the type of handle) to an appropriate location.".
Document this requirement on seeking in the glibc manual, limited to
the case that seems relevant to glibc (the new channel is a previously
active stream, on which the seeking previously occurred). Note that
I'm not sure what the "except as required above for the first handle"
is meant to be about, so I haven't documented anything for it. As far
as I can tell, nothing specified for moving from the first handle
actually list calling a seek function as one of the steps to be done.
(Current POSIX doesn't seem to have any relevant rationale for this
section. The rationale in the 1996 edition says "In requiring the
seek to an appropriate location for the new handle, the application is
required to know what it is doing if it is passing streams with seeks
involved. If the required seek is not done, the results are undefined
(and in fact the program probably will not work on many common
implementations)." - which also doesn't help in understanding the
purpose of "except as required above for the first handle".)
Tested with "make info" and "make pdf".
In both routines, reduce register pressure such that GCC 14 emits no
spills for erf and fewer spills for erfc. Also use more efficient
comparison for the special-case in erf.
Benchtests show erf improves by 6.4%, erfc by 1.0%.
In commit c628c22963 (elf: Remove
ldconfig kernel version check), the layout of auxcache entries
changed because the osversion field was removed from
struct aux_cache_file_entry. However, AUX_CACHEMAGIC was not
changed, so existing files are still used, potentially leading
to unintended ldconfig behavior. This commit changes AUX_CACHEMAGIC,
so that the file is regenerated.
Reported-by: DJ Delorie <dj@redhat.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This fixes a buffer overflow in wide character string output, reproducing
when output fails, such as if the output fd is closed or is redirected
to a full device.
Wide character output data attempts to maintain the invariant that
`_IO_buf_base <= _IO_write_base <= _IO_write_end <= _IO_buf_end` (that is,
that the write region is a sub-region of `_IO_buf`). Prior to this commit,
this invariant is violated by the `_IO_wfile_overflow` function as so:
1. `_IO_wsetg` is called, assigning `_IO_write_base` to `_IO_buf_base`
2. `_IO_doallocbuf` is called, which jumps to `_IO_wfile_doallocate` via
the _IO_wfile_jumps vtable. This function then assigns the wide data
`_IO_buf_base` and `_IO_buf_end` to a malloc'd buffer.
Thus the invariant is violated. The fix is simply to reverse the order:
malloc the `_IO_buf` first and then assign `_IO_write_base` to it.
We also take this opportunity to defensively guard the initialization of
the number of unwritten characters via pointer arithmetic. We now check
that the buffer end is not before the buffer beginning; this matches a
similar defensive check in the narrow analogue `fileops.c`.
Add a test which fails without the fix.
Signed-off-by: Peter Ammon <corydoras@ridiculousfish.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The scanf family of functions like sscanf and fscanf currently
ignore nan() and nan(n-char-sequence). This happens because
__vfscanf_internal only checks for 'nan'.
This commit adds support for all valid nan types i.e. nan, nan()
and nan(n-char-sequence), where n-char-sequence can be
[a-zA-Z0-9_]+, thus fixing the bug 30647. Any other representation
of NaN should result in conversion error.
New tests are also added to verify the correct parsing of NaN types for
float, double and long double formats.
Signed-off-by: Avinal Kumar <avinal.xlvii@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The refactoring did not take the change of variable into account.
Fixes commit 43db5e2c06
("elf: Signal RT_CONSISTENT after relocation processing in dlopen
(bug 31986)").
Previously, a la_activity audit event was generated before
relocation processing completed. This does did not match what
happened during initial startup in elf/rtld.c (towards the end
of dl_main). It also caused various problems if an auditor
tried to open the same shared object again using dlmopen:
If it was the directly loaded object, it had a search scope
associated with it, so the early exit in dl_open_worker_begin
was taken even though the object was unrelocated. This caused
the r_state == RT_CONSISTENT assert to fail. Avoidance of the
assert also depends on reversing the order of r_state update
and auditor event (already implemented in a previous commit).
At the later point, args->map can be NULL due to failure,
so use the assigned namespace ID instead if that is available.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Auditors can call into the dynamic loader again if
LA_ACT_CONSISTENT, and those recursive calls could observe
r_state != RT_CONSISTENT.
We should consider failing dlopen/dlmopen/dlclose if
r_state != RT_CONSISTENT. The dynamic linker is probably not
in a state in which it can handle reentrant calls. This
needs further investigation.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This is conceptually similar to the reported bug, but does not
depend on auditing. The fix is simple: just complete execution
of the constructors. This exposed the fact that the link map
for statically linked executables does not have l_init_called
set, even though constructors have run.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This avoids -Werror build issues in strace, which bundles UAPI
headers, but does not include them as system headers.
Fixes commit c444cc1d83
("Linux: Add missing scheduler constants to <sched.h>").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
tst-popen-fork failed to build for Hurd due to not being linked with
libpthread. This commit fixes that.
Tested with build-many-glibcs.py for i686-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Add basic tests of pthread_mutexattr_gettype and
pthread_mutexattr_settype with each valid mutex kind, plus test for
EINVAL with an invalid mutex kind.
Tested for x86_64.
popen modifies its file handler book-keeping under a lock that wasn't
being taken during fork. This meant that a concurrent popen and fork
could end up copying the lock in a "locked" state into the fork child,
where subsequently calling popen would lead to a deadlock due to the
already (spuriously) held lock.
This commit fixes the deadlock by appropriately taking the lock before
fork, and releasing/resetting it in the parent/child after the fork.
A new test for concurrent popen and fork is also added. It consistently
hangs (and therefore fails via timeout) without the fix applied.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Glibc has two gnu-extension functions that are implemented as
macros but not documented as such: fread_unlocked and
fwrite_unlocked. Document them as such.
Additionally, putc_unlocked and getc_unlocked are documented in
POSIX as possibly being macros. Update the manual to add a warning
about those also, depite glibc not implementing them as macros.
The pthread_timedjoin_np and pthread_clockjoin_np functions do not
check that a valid time has been specified. The documentation for
these functions in the glibc manual isn't sufficiently detailed to say
if they should, but consistency with POSIX functions such as
pthread_mutex_timedlock and pthread_cond_timedwait strongly indicates
that an EINVAL error is appropriate (even if there might be some
ambiguity about exactly where such a check should go in relation to
other checks for whether the thread exists, whether it's immediately
joinable, etc.). Copy the logic for such a check used in
pthread_rwlock_common.c.
pthread_join_common had some logic calling valid_nanoseconds before
commit 9e92278ffa, "nptl: Remove
clockwait_tid"; I haven't checked exactly what cases that detected.
Tested for x86_64 and x86.
This makes b4 use inbox.sourceware.org instead of the default host
lore.kernel.org, so that every b4 user doesn't have to configure this
themselves for the glibc repo.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The commit 'sparc: Use Linux kABI for syscall return'
(86c5d2cf0c) did not take into account
a subtle sparc syscall kABI constraint. For syscalls that might block
indefinitely, on an interrupt (like SIGCONT) the kernel will set the
instruction pointer to just before the syscall:
arch/sparc/kernel/signal_64.c
476 static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
477 {
[...]
525 if (restart_syscall) {
526 switch (regs->u_regs[UREG_I0]) {
527 case ERESTARTNOHAND:
528 case ERESTARTSYS:
529 case ERESTARTNOINTR:
530 /* replay the system call when we are done */
531 regs->u_regs[UREG_I0] = orig_i0;
532 regs->tpc -= 4;
533 regs->tnpc -= 4;
534 pt_regs_clear_syscall(regs);
535 fallthrough;
536 case ERESTART_RESTARTBLOCK:
537 regs->u_regs[UREG_G1] = __NR_restart_syscall;
538 regs->tpc -= 4;
539 regs->tnpc -= 4;
540 pt_regs_clear_syscall(regs);
541 }
However, on a SIGCONT it seems that 'g1' register is being clobbered after the
syscall returns. Before 86c5d2cf0c, the 'g1' was always placed jus
before the 'ta' instruction which then reloads the syscall number and restarts
the syscall.
On master, where 'g1' might be placed before 'ta':
$ cat test.c
#include <unistd.h>
int main ()
{
pause ();
}
$ gcc test.c -o test
$ strace -f ./t
[...]
ppoll(NULL, 0, NULL, NULL, 0
On another terminal
$ kill -STOP 2262828
$ strace -f ./t
[...]
--- SIGSTOP {si_signo=SIGSTOP, si_code=SI_USER, si_pid=2521813, si_uid=8289} ---
--- stopped by SIGSTOP ---
And then
$ kill -CONT 2262828
Results in:
--- SIGCONT {si_signo=SIGCONT, si_code=SI_USER, si_pid=2521813, si_uid=8289} ---
restart_syscall(<... resuming interrupted ppoll ...>) = -1 EINTR (Interrupted system call)
Where the expected behaviour would be:
$ strace -f ./t
[...]
ppoll(NULL, 0, NULL, NULL, 0) = ? ERESTARTNOHAND (To be restarted if no handler)
--- SIGSTOP {si_signo=SIGSTOP, si_code=SI_USER, si_pid=2521813, si_uid=8289} ---
--- stopped by SIGSTOP ---
--- SIGCONT {si_signo=SIGCONT, si_code=SI_USER, si_pid=2521813, si_uid=8289} ---
ppoll(NULL, 0, NULL, NULL, 0
Just moving the 'g1' setting near the syscall asm is not suffice,
the compiler might optimize it away (as I saw on cancellation.c by
trying this fix). Instead, I have change the inline asm to put the
'g1' setup in ithe asm block. This would require to change the asm
constraint for INTERNAL_SYSCALL_NCS, since the syscall number is not
constant.
Checked on sparc64-linux-gnu.
Reported-by: René Rebe <rene@exactcode.de>
Tested-by: Sam James <sam@gentoo.org>
Reviewed-by: Sam James <sam@gentoo.org>
The manual contained several instances of incorrect formatting
that were correct texinfo but produced incorrectly rendered manuals
or incorrect behaviour from the tooling.
The most important was incorrect quoting of function returns
by failing to use {} to quote the return. The impact of this
mistake means that 'info libc func' does not jump to the function
in question but instead to the introductory page under the assumption
that func doesn't exist. The function returns are now correctly
quoted.
The second issue was the use of a category specifier with
@deftypefun which doesn't accept a category specifier. If a category
specifier is required then @deftypefn needs to be used. This is
corrected by changing the command to @deftypefn for such functions
that used {Deprecated function} as a category.
The last issue is a missing space between the function name and the
arguments which results in odd function names like "epoll_wait(int"
instead of "epoll_wait". This also impacts the use of 'info libc'
and is corrected.
We additionally remove ';' from the end of function arguments and
add an 'int' return type for dprintf.
Lastly we add a new test check-deftype.sh which verifies the expected
formatting of @deftypefun, @deftypefunx, @deftypefn, and
@deftypefnx. The new test is also run as the summary file is
generated to ensure we don't generate incorrect results.
The existing check-safety.sh is also run directly as a test to increase
coverage since the existing tests only ran on manual install.
The new tests now run as part of the standard "make check" that
pre-commit CI runs and developers should run.
No regressions on x86_64.
HTML and PDF rendering reviewed and looks correct for all changes.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The CORE-MATH implementation is correctly rounded (for any rounding mode).
This can be checked by exhaustive tests in a few minutes since there are
less than 2^32 values to check against for example GNU MPFR.
This patch also adds some bench values for tgammaf.
Tested on x86_64 and x86 (cfarm26).
With the initial GNU libc code it gave on an Intel(R) Core(TM) i7-8700:
"tgammaf": {
"": {
"duration": 3.50188e+09,
"iterations": 2e+07,
"max": 602.891,
"min": 65.1415,
"mean": 175.094
}
}
With the new code:
"tgammaf": {
"": {
"duration": 3.30825e+09,
"iterations": 5e+07,
"max": 211.592,
"min": 32.0325,
"mean": 66.1649
}
}
With the initial GNU libc code it gave on cfarm26 (i686):
"tgammaf": {
"": {
"duration": 3.70505e+09,
"iterations": 6e+06,
"max": 2420.23,
"min": 243.154,
"mean": 617.509
}
}
With the new code:
"tgammaf": {
"": {
"duration": 3.24497e+09,
"iterations": 1.8e+07,
"max": 1238.15,
"min": 101.155,
"mean": 180.276
}
}
Signed-off-by: Alexei Sibidanov <sibid@uvic.ca>
Signed-off-by: Paul Zimmermann <Paul.Zimmermann@inria.fr>
Changes in v2:
- include <math.h> (fix the linknamespace failures)
- restored original benchtests/strcoll-inputs/filelist#en_US.UTF-8 file
- restored original wrapper code (math/w_tgammaf_compat.c),
except for the dealing with the sign
- removed the tgammaf/float entries in all libm-test-ulps files
- address other comments from Joseph Myers
(https://sourceware.org/pipermail/libc-alpha/2024-July/158736.html)
Changes in v3:
- pass NULL argument for signgam from w_tgammaf_compat.c
- use of math_narrow_eval
- added more comments
Changes in v4:
- initialize local_signgam to 0 in math/w_tgamma_template.c
- replace sysdeps/ieee754/dbl-64/gamma_productf.c by dummy file
Changes in v5:
- do not mention local_signgam any more in math/w_tgammaf_compat.c
- initialize local_signgam to 1 instead of 0 in w_tgamma_template.c
and added comment
Changes in v6:
- pass NULL as 2nd argument of __ieee754_gammaf_r in
w_tgammaf_compat.c, and check for NULL in e_gammaf_r.c
Changes in v7:
- added Signed-off-by line for Alexei Sibidanov (author of the code)
Changes in v8:
- added Signed-off-by line for Paul Zimmermann (submitted of the patch)
Changes in v9:
- address comments from review by Adhemerval Zanella
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Linux 6.11 adds a define IPPROTO_SMC to its include/uapi/linux/in.h
(commit d25a92ccae6b).
Checked on x86_64-linux-gnu.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Linux 6.11 adds the new flag for pwritev2 (commit
c34fc6f26ab86d03a2d47446f42b6cd492dfdc56).
Checked on x86_64-linux-gnu on 6.11 kernel.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
It adds the new constants from 'fs: Add initial atomic write support
info to statx' (commit 0f9ca80fa4f9670ba09721e4e36b8baf086a500c).
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
This patch updates the kernel version in the tests tst-mount-consts.py,
and tst-sched-consts.py to 6.11.
There are no new constants covered by these tests in 6.11.
Tested with build-many-glibcs.py.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
This request the page to be never written out to swap, it will be zeroed
under memory pressure (so kernel can just drop the page), it is inherited
by fork, it is not counted against @code{mlock} budget, and if there is
no enough memory to service a page faults there is no fatal error (so not
signal is sent).
Tested with build-many-glibcs.py.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Linux 6.11 adds some more PIDFD_* constants for 'pidfs: allow retrieval
of namespace file descriptors'
(5b08bd408534bfb3a7cf5778da5b27d4e4fffe12).
Tested with build-many-glibcs.py.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Linux 6.11 changes for syscall are:
* fstat/newfstatat for loongarch (it should be safe to add since
255dc1e4ed that undefine them).
* clone3 for nios2, which only adds the entry point but defined
__ARCH_BROKEN_SYS_CLONE3 (the syscall will always return ENOSYS).
* uretprobe for x86_64 and x32.
Update syscall-names.list and regenerate the arch-syscall.h headers
with build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
GCC mainline produces a -Wheader-guard error building for x86_64-gnu.
Fix what seems to be incorrect macro naming in the #ifndef
conditional.
Tested with build-many-glibc.py for x86_64-gnu (GCC mainline).
Message-ID: <fd800046-5ecb-ebd5-4df1-29d4eb3d5433@redhat.com>
Test that clock_nanosleep rejects out of range time values.
Test that clock_nanosleep actually sleeps for at least the
requested time relative to the requested clock.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The recursive lock used on abort does not synchronize with a new process
creation (either by fork-like interfaces or posix_spawn ones), nor it
is reinitialized after fork().
Also, the SIGABRT unblock before raise() shows another race condition,
where a fork or posix_spawn() call by another thread, just after the
recursive lock release and before the SIGABRT signal, might create
programs with a non-expected signal mask. With the default option
(without POSIX_SPAWN_SETSIGDEF), the process can see SIG_DFL for
SIGABRT, where it should be SIG_IGN.
To fix the AS-safe, raise() does not change the process signal mask,
and an AS-safe lock is used if a SIGABRT is installed or the process
is blocked or ignored. With the signal mask change removal,
there is no need to use a recursive loc. The lock is also taken on
both _Fork() and posix_spawn(), to avoid the spawn process to see the
abort handler as SIG_DFL.
A read-write lock is used to avoid serialize _Fork and posix_spawn
execution. Both sigaction (SIGABRT) and abort() requires to lock
as writer (since both change the disposition).
The fallback is also simplified: there is no need to use a loop of
ABORT_INSTRUCTION after _exit() (if the syscall does not terminate the
process, the system is broken).
The proposed fix changes how setjmp works on a SIGABRT handler, where
glibc does not save the signal mask. So usage like the below will now
always abort.
static volatile int chk_fail_ok;
static jmp_buf chk_fail_buf;
static void
handler (int sig)
{
if (chk_fail_ok)
{
chk_fail_ok = 0;
longjmp (chk_fail_buf, 1);
}
else
_exit (127);
}
[...]
signal (SIGABRT, handler);
[....]
chk_fail_ok = 1;
if (! setjmp (chk_fail_buf))
{
// Something that can calls abort, like a failed fortify function.
chk_fail_ok = 0;
printf ("FAIL\n");
}
Such cases will need to use sigsetjmp instead.
The _dl_start_profile calls sigaction through _profil, and to avoid
pulling abort() on loader the call is replaced with __libc_sigaction.
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
The BZ#24967 fix (1bdda52fe9) missed the time for
architectures that define USE_IFUNC_TIME. Although it is not
an issue, since there is no pointer mangling, there is also no need
to call dl_vdso_vsym since the vDSO setup was already done by the
loader.
Checked on x86_64-linux-gnu and i686-linux-gnu.
The BZ#24967 fix (1bdda52fe9) missed the gettimeofday for
architectures that define USE_IFUNC_GETTIMEOFDAY. Although it is not
an issue, since there is no pointer mangling, there is also no need
to call dl_vdso_vsym since the vDSO setup was already done by the
loader.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Building the s390 specific iconv modules - utf16-utf32-z9.c, utf8-utf32-z9.c
and utf8-utf16-z9.c - with -fno-omit-frame-pointer leads to a build error
"error: %r11 cannot be used in 'asm' here" as r11 is needed as frame-pointer.
The cuXY-instructions need two even-odd register pairs. Therefore the register
pinning is used. This patch just uses a different register pair.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Several copies of the licenses in files contained whitespace related
problems. Two cases are addressed here, the first is two spaces
after a period which appears between "PURPOSE." and "See". The other
is a space after the last forward slash in the URL. Both issues are
corrected and the licenses now match the official textual description
of the license (and the other license in the sources).
Since these whitespaces changes do not alter the paragraph structure of
the license, nor create new sentences, they do not change the license.
Add tests of freopen adding or removing "c" (non-cancelling I/O) from
the mode string (so completing my planned tests of freopen with
different features used in the mode strings). Note that it's in the
nature of the uncertain time at which cancellation might act (possibly
during freopen, possibly during subsequent reads) that these can leak
memory or file descriptors, so these do not include leak tests.
Tested for x86_64.
