The difference between strlen and wcslen is byte vs int. We can
replace pminub and pcmpeqb with pminud and pcmpeqd to turn strlen
into wcslen.
* sysdeps/x86_64/strlen.S (PMINU): New.
(PCMPEQ): Likewise.
(SHIFT_RETURN): Likewise.
(FIND_ZERO): Replace pcmpeqb with PCMPEQ.
(strlen): Add SHIFT_RETURN before ret. Replace pcmpeqb and
pminub with PCMPEQ and PMINU.
* sysdeps/x86_64/wcsnlen.S: New file.
By x86-64 specification, 32-bit destination registers are zero-extended
to 64 bits. There is no need to use 64-bit registers when only the lower
32 bits are non-zero. Also 2 instructions in:
mov %rdi, %rcx
and $15, %rcx
jz L(length_less16_offset0)
mov %rdi, %rcx <<< redundant
and $15, %rcx <<< redundant
are redundant.
* sysdeps/x86_64/memrchr.S (__memrchr): Use 32-bit registers for
the lower 32 bits. Remove redundant instructions.
The kernel interface for p{readv,writev}{64}v is
(unsigned long fd, {const }struct iovec *iov, unsigned long vlen,
unsigned long pos_l, unsigned long pos_h)
Except for targets which define __ARCH_WANT_COMPAT_SYS_PREADV64 and
__ARCH_WANT_COMPAT_SYS_PWRITEV64,
(unsigned long fd, {const }struct iovec *iov, unsigned long vlen,
off64_t pos)
is used for p{readv,writev}{64}v. X32 is the only such target. The
LO_HI_LONG macro is used to pass offset to the pos_l and pos_h pair.
Since pos_h is ignored when size of offset == sizeof of pos_l, x86-64
has
#define LO_HI_LONG(val) (val)
But the kernel interface for p{readv,writev}{64}v2 is
(unsigned long fd, {const }struct iovec *iov, unsigned long vlen,
unsigned long pos_l, unsigned long pos_h, int flags)
Except for targets which define __ARCH_WANT_COMPAT_SYS_PREADV64V2 and
__ARCH_WANT_COMPAT_SYS_PWRITEV64V2,
(unsigned long fd, {const }struct iovec *iov, unsigned long vlen,
off64_t pos, int flags)
is used for p{readv,writev}{64}v2. X32 is the only such target. Update
x86-64 LO_HI_LONG to pass 0 as the high part of the offset argument for
p{readv,writev}{64}v2 and define a different LO_HI_LONG for x32 to only
pass one argument for offset.
Tested on x32 and x86-64.
* sysdeps/unix/sysv/linux/x86_64/sysdep.h (LO_HI_LONG): Pass
0 as the high part of offset.
* sysdeps/unix/sysv/linux/x86_64/x32/sysdep.h (LO_HI_LONG): New.
Various bits/signum.h headers define SIG_HOLD if __USE_UNIX98. That
should be __USE_XOPEN, as this macro is in XPG4. This patch fixes the
conditionals accordingly. Because of other header bugs, this does not
allow any XFAILs to be removed (however, the XPG4/signal.h/conform
XFAIL only depends on a few such straightforward header bugs, not on
the more complicated to fix ucontext_t issues, as ucontext_t isn't
included in signal.h in XPG4).
Tested for x86_64.
[BZ #21538]
* bits/signum.h (SIG_HOLD): Define if [__USE_XOPEN], not
[__USE_UNIX98].
* sysdeps/unix/bsd/bits/signum.h (SIG_HOLD): Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/signum.h (SIG_HOLD):
Likewise.
* sysdeps/unix/sysv/linux/bits/signum.h (SIG_HOLD): Likewise.
* sysdeps/unix/sysv/linux/hppa/bits/signum.h (SIG_HOLD): Likewise.
* sysdeps/unix/sysv/linux/mips/bits/signum.h (SIG_HOLD): Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/signum.h (SIG_HOLD):
Likewise.
glibc defines the stack_t type with the tag struct sigaltstack. This
is not permitted by POSIX; sigaltstack is only reserved with file
scope in the namespace of ordinary identifiers, not the tag namespace,
and in the case where stack_t is obtained from ucontext.h rather than
signal.h, it's not reserved with file scope at all.
This patch removes the tag accordingly and updates uses in glibc of
struct sigaltstack. This is similar to the removal of the "struct
siginfo" tag a few years ago: C++ name mangling changes are an
unavoidable consequence. A NEWS item is added to note the changed
mangling. There is inevitably some risk of breaking builds of
anything that relies on the struct sigaltstack name (though the first
few hits I looked at from codesearch.debian.net generally seemed to
involve code that could use the stack_t name conditionally, so
depending on how they determine the conditionals they may work with
glibc not defining the struct tag anyway).
Tested for x86_64 and x86, and with build-many-glibcs.py.
[BZ #21517]
* bits/types/stack_t.h (stack_t): Remove struct tag.
* sysdeps/unix/sysv/linux/bits/types/stack_t.h (stack_t):
Likewise.
* sysdeps/unix/sysv/linux/mips/bits/types/stack_t.h (stack_t):
Likewise.
* debug/segfault.c (install_handler): Use stack_t instead of
struct sigaltstack.
* hurd/hurd/signal.h (struct hurd_sigstate): Likewise.
* hurd/trampoline.c (_hurd_setup_sighandler): Likewise.
* include/signal.h (__sigaltstack): Likwise.
* signal/sigaltstack.c (__sigaltstack): Likewise.
* signal/signal.h (sigaltstack): Likewise.
* sysdeps/mach/hurd/i386/signal-defines.sym
(SIGALTSTACK__SS_SP__OFFSET): Likewise.
(SIGALTSTACK__SS_SIZE__OFFSET): Likewise.
(SIGALTSTACK__SS_FLAGS__OFFSET): Likewise.
* sysdeps/mach/hurd/sigaltstack.c (__sigaltstack): Likewise.
* sysdeps/mach/hurd/sigstack.c (sigstack): Likewise.
* sysdeps/unix/sysv/linux/alpha/sys/procfs.h (struct
elf_prstatus): Likewise.
* sysdeps/unix/sysv/linux/hppa/____longjmp_chk.c (CHECK_SP):
Likewise.
* sysdeps/unix/sysv/linux/ia64/sys/procfs.h (struct elf_prstatus):
Likewise.
* sysdeps/unix/sysv/linux/m68k/____longjmp_chk.c (CHECK_SP):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/sys/procfs.h (struct
elf_prstatus): Likewise.
* sysdeps/unix/sysv/linux/sh/sys/procfs.h (struct elf_prstatus):
Likewise.
* sysdeps/unix/sysv/linux/sys/procfs.h (struct elf_prstatus):
Likewise.
bench-memchr.c is shared with bench-memrchr.c. This patch adds some
tests for positions close to the beginning for memrchr, which are
equivalent to positions close to the end for memchr.
* benchtests/bench-memchr.c (do_test): Print out both length
and position.
(test_main): Also test the position close to the beginning for
memrchr.
Every file that uses libc_hidden_nolink_sunrpc or
libnsl_hidden_nolink_def needs to include shlib-compat.h. Currently,
most of them are getting it via stdio.h, because libio.h refers to
SHLIB_COMPAT when _LIBC is defined, so it includes shlib-compat.h. My
experimental patch to not install libio.h breaks that chain; stdio.h
no longer pulls in libio.h even for internal users.
Accordingly, this patch adds #include <shlib-compat.h> to many files
in sunrpc/ and nis/. There are also a small number of really obvious
fixups to includes that caught my eye while proofreading the patch -
not including headers twice in a row, not worrying about portability
to Ultrix anymore, sort of thing.
* nis/nis_add.c, nis/nis_addmember.c, nis/nis_call.c
* nis/nis_checkpoint.c, nis/nis_clone_dir.c, nis/nis_clone_obj.c
* nis/nis_clone_res.c, nis/nis_creategroup.c, nis/nis_defaults.c
* nis/nis_destroygroup.c, nis/nis_domain_of.c
* nis/nis_domain_of_r.c, nis/nis_error.c, nis/nis_file.c
* nis/nis_free.c, nis/nis_getservlist.c, nis/nis_ismember.c
* nis/nis_local_names.c, nis/nis_lookup.c, nis/nis_mkdir.c
* nis/nis_modify.c, nis/nis_ping.c, nis/nis_print.c
* nis/nis_print_group_entry.c, nis/nis_remove.c
* nis/nis_removemember.c, nis/nis_rmdir.c, nis/nis_server.c
* nis/nis_subr.c, nis/nis_table.c, nis/nis_util.c
* nis/nis_verifygroup.c, nis/nis_xdr.c, nis/yp_xdr.c
* nis/ypclnt.c, nis/ypupdate_xdr.c, sunrpc/auth_des.c
* sunrpc/auth_none.c, sunrpc/auth_unix.c, sunrpc/authdes_prot.c
* sunrpc/authuxprot.c, sunrpc/clnt_gen.c, sunrpc/clnt_perr.c
* sunrpc/clnt_raw.c, sunrpc/clnt_simp.c, sunrpc/clnt_tcp.c
* sunrpc/clnt_udp.c, sunrpc/clnt_unix.c, sunrpc/des_crypt.c
* sunrpc/des_soft.c, sunrpc/get_myaddr.c, sunrpc/key_call.c
* sunrpc/key_prot.c, sunrpc/netname.c, sunrpc/pm_getmaps.c
* sunrpc/pm_getport.c, sunrpc/pmap_clnt.c, sunrpc/pmap_prot.c
* sunrpc/pmap_prot2.c, sunrpc/pmap_rmt.c, sunrpc/publickey.c
* sunrpc/rpc_cmsg.c, sunrpc/rpc_dtable.c, sunrpc/rpc_prot.c
* sunrpc/rpc_thread.c, sunrpc/rtime.c, sunrpc/svc.c
* sunrpc/svc_auth.c, sunrpc/svc_raw.c, sunrpc/svc_run.c
* sunrpc/svc_tcp.c, sunrpc/svc_udp.c, sunrpc/svc_unix.c
* sunrpc/svcauth_des.c, sunrpc/xdr.c, sunrpc/xdr_array.c
* sunrpc/xdr_float.c, sunrpc/xdr_intXX_t.c, sunrpc/xdr_mem.c
* sunrpc/xdr_rec.c, sunrpc/xdr_ref.c, sunrpc/xdr_sizeof.c
* sunrpc/xdr_stdio.c: Include shlib-compat.h.
* sunrpc/des_crypt.c, sunrpc/des_soft.c: No need to include
abi-versions.h as well as shlib-compat.h.
* sunrpc/get_myaddr.c: Remove obsolete comment.
* sunrpc/pmap_rmt.c: Remove obsolete comment and #undef.
* sunrpc/rpc_thread.c: Include libc-lock.h only once.
* resolv/res_libc.c: Include shlib-compat.h only once.
__x86_shared_non_temporal_threshold was set to 6 times of per-core
shared cache size, based on the large memcpy micro benchmark in glibc
on a 8-core processor. For a processor with more than 8 cores, the
threshold is too low. Set __x86_shared_non_temporal_threshold to the
3/4 of the total shared cache size so that it is unchanged on 8-core
processors. On processors with less than 8 cores, the threshold is
lower.
* sysdeps/x86/cacheinfo.c (__x86_shared_non_temporal_threshold):
Set to the 3/4 of the total shared cache size.
The @errno macro is extended to render the canonical error string in
every documented errno error. Redundant entries and "???" are
removed. Sixty-six errors now at least contain the error string as
the description, where no description (or "???") existed before.
* manual/errno.texi: Remove redundant error strings.
* manual/macros.texi (@errno): Render the error string in
every description.
signal.h defines the sigevent structure and constants if defined
__USE_POSIX199309 || defined __USE_XOPEN_EXTENDED. The
__USE_XOPEN_EXTENDED condition is incorrect; this structure does not
appear in XSI standards before Unix98 (which implies
__USE_POSIX199309). This patch fixes the conditionals accordingly
(the existing conditional is correct for siginfo_t, just not for
sigevent).
Tested for x86_64. This does not allow any conform/ XFAILs to be
removed because of other signal.h namespace bugs.
[BZ #21543]
* signal/signal.h: Only include <bits/types/sigevent_t.h> and
<bits/sigevent-consts.h> if [__USE_POSIX199309], not if
[__USE_XOPEN_EXTENDED].
This patch adds the missing compiler flags for correct pthread cancellation
on some architectures for the p{read,write}v2 implementation (52bd938169).
Checked on x86_64-linux-gnu and powerpc64le-linux-gnu.
* misc/Makefile (CFLAGS-preadv2.c): New rule.
(CFLAGS-preadv64v2.c): Likewise.
(CFLAGS-pwritev2.c): Likewise.
(CFLAGS-pwritev64v2.c): Likewise.
A further simplification could eliminate the canon variable in
gaih_inet and replace it with canonbuf. However, canonbuf is
used as a flag in the nscd code, which makes this somewhat
non-straightforward.
This is intended as a type-safe alternative to obstacks and
hand-written realloc constructs. The implementation avoids
writing function pointers to the heap.
In stdlib/gmp-impl.h, the macros MAX and MIN are defined exactly the same
as in sys/param.h. This patch removes the redefinition and makes
gmp-impl.h include sys/param.h instead.
Tested for powerpc64le and s390x.
* stdlib/gmp-impl.h: Include sys/param.h instead of redefining the
macros MAX and MIN.
Various of the signal.h conform/ failures for XPG4 and XPG42 are
actually the result of incorrect test expectations rather than header
bugs. This patch fixes the expectations to accord with those
standards (this does not however allow any XFAILs to be removed, as
some header bugs remain). Note for anyone comparing with the
standards: corrigendum U013/16 removes the mention of a sigmask
function in signal.h (C435 lists such a function in the definition of
signal.h, but without any actual specification for the function
itself), so sigmask is not included in the expectations.
Tested for x86_64.
* conform/data/signal.h-data (sa_sigaction): Do not expect for
[XPG4].
(SA_SIGINFO): Likewise.
(SA_ONSTACK): Likewise.
(SA_RESETHAND): Likewise.
(SA_RESTART): Likewise.
(SA_NOCLDWAIT): Likewise.
(SA_NODEFER): Likewise.
(SS_ONSTACK): Likewise.
(SS_DISABLE): Likewise.
(MINSIGSTKSZ): Likewise.
(SIGSTKSZ): Likewise.
(ucontext_t): Likewise.
(stack_t): Likewise.
(struct sigstack): Likewise.
(SI_USER): Do not expect for [XPG4 || XPG42].
(SI_QUEUE): Likewise.
(SI_TIMER): Likewise.
(SI_ASYNCIO): Likewise.
(SI_MESGQ): Likewise.
(bsd_signal): Do not expect for [XPG4].
(killpg): Likewise.
(sigaltstack): Likewise.
(sighold): Likewise.
(sigignore): Likewise.
(siginterrupt): Likewise.
(sigpause): Likewise.
(sigrelse): Likewise.
(sigset): Likewise.
(sigwait): Do not expect for [XPG4 || XPG42].
On Linux-based configurations, bits/syscall.h is a generated file.
To avoid build-ordering problems, the Linux sys/syscall.h only includes
bits/syscall.h if _LIBC is not defined. After the _ISOMAC-testsuite
changes, this means any test case that includes sys/syscall.h tries to
pull in bits/syscall.h. This would be fine, because it'll definitely
have been generated by the time we start compiling tests, except that
the generated <builddir>/misc/bits/syscall.h is not visible in the
include path, because nothing needed it till now. So we either get
the bits/syscall.h from the host system, or the build fails.
The fix is simple: add a shim header for bits/syscall.h. I put it in
sysdeps/unix/sysv/linux/include instead of the top-level include/
because bits/syscall.h doesn't exist at all on other configurations as
far as I can tell.
This is known to affect nptl/tst-cond2[45]. Thanks to John David
Anglin for noticing the problem.
[BZ #21514]
* sysdeps/unix/sysv/linux/include/bits/syscall.h: New shim header
pointing to the generated file in <builddir>/misc/bits/syscall.h.
Continuing the fixes for namespace issues in sys/ucontext.h, this
patch moves various symbols into the implementation namespace in the
absence of __USE_MISC. As with previous changes, it is nonexhaustive,
just covering more straightforward cases.
Structure fields are generally changed to have a prefix __ in the
absence of __USE_MISC, via a macro __ctx (used without a space before
the open parenthesis, since the result is a single identifier).
Various macros such as NGREG also have leading __ added. No changes
are made to structure tags (and thus to C++ name mangling), except
that in the (unused) file sysdeps/i386/sys/ucontext.h, structures
defined inside other structures as the type for a field have their
tags removed in the non-__USE_MISC case (those structure tags would
not in any case have been visible in C++, because in C++ the scope of
such a tag is limited to the containing structure). No changes are
made to the contents of bits/sigcontext.h, or to whether it is
included. Because of remaining namespace issues, this patch does not
yet fix the bug or allow any XFAILs to be removed.
Tested for x86_64 and x86, and with build-many-glibcs.py.
[BZ #21457]
* sysdeps/arm/sys/ucontext.h (NGREG): Rename to __NGREG and define
NGREG to __NGREG if [__USE_MISC].
(gregset_t): Define using __NGREG.
(__ctx): New macro.
(mcontext_t): Use __ctx in defining fields.
* sysdeps/i386/sys/ucontext.h (NGREG): Rename to __NGREG and
define NGREG to __NGREG if [__USE_MISC].
(gregset_t): Define using __NGREG.
(__ctx): New macro.
(__ctxt): Likewise.
(fpregset_t): Use __ctx and __ctxt in defining fields.
(mcontext_t): Likewise.
* sysdeps/m68k/sys/ucontext.h (NGREG): Rename to __NGREG and
define NGREG to __NGREG if [__USE_MISC].
(gregset_t): Define using __NGREG.
(__ctx): New macro.
(mcontext_t): Use __ctx in defining fields.
* sysdeps/mips/sys/ucontext.h (NGREG): Rename to __NGREG and
define NGREG to __NGREG if [__USE_MISC].
(gregset_t): Define using __NGREG.
(__ctx): New macro.
(fpregset_t): Use __ctx in defining fields.
(mcontext_t): Likewise.
* sysdeps/unix/sysv/linux/alpha/sys/ucontext.h (NGREG): Rename to
__NGREG and define NGREG to __NGREG if [__USE_MISC].
(gregset_t): Define using __NGREG.
(NFPREG): Rename to __NFPREG and define NFPREG to __NFPREG if
[__USE_MISC].
(fpregset_t): Define using __NFPREG.
* sysdeps/unix/sysv/linux/m68k/sys/ucontext.h (NGREG): Rename to
__NGREG and define NGREG to __NGREG if [__USE_MISC].
(gregset_t): Define using __NGREG.
(__ctx): New macro.
(fpregset_t): Use __ctx in defining fields.
(mcontext_t): Likewise.
* sysdeps/unix/sysv/linux/mips/sys/ucontext.h (NGREG): Rename to
__NGREG and define NGREG to __NGREG if [__USE_MISC].
(NFPREG): Rename to __NFPREG and define NFPREG to __NFPREG if
[__USE_MISC].
(gregset_t): Define using __NGREG.
(__ctx): New macro.
(fpregset_t): Use __ctx in defining fields.
(mcontext_t): Likewise.
* sysdeps/unix/sysv/linux/nios2/sys/ucontext.h (__ctx): New macro.
(mcontext_t): Use __ctx in defining fields.
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h (__ctx): New
macro.
[__WORDSIZE == 32] (NGREG): Rename to __NGREG and define NGREG to
__NGREG if [__USE_MISC].
[__WORDSIZE == 32] (gregset_t): Define using __NGREG.
[__WORDSIZE == 32] (fpregset_t): Use __ctx in defining fields.
(mcontext_t): Likewise.
[__WORDSIZE != 32] (NGREG): Rename to __NGREG and define NGREG to
__NGREG if [__USE_MISC].
[__WORDSIZE != 32] (NFPREG): Rename to __NFPREG and define NFPREG
to __NFPREG if [__USE_MISC].
[__WORDSIZE != 32] (NVRREG): Rename to __NVRREG and define NVRREG
to __NVRREG if [__USE_MISC].
[__WORDSIZE != 32] (gregset_t): Define using __NGREG.
[__WORDSIZE != 32] (fpregset_t): Define using __NFPREG.
[__WORDSIZE != 32] (vscr_t): Use __ctx in defining fields.
[__WORDSIZE != 32] (vrregset_t): Likewise.
[__WORDSIZE != 32] (mcontext_t): Likewise.
* sysdeps/unix/sysv/linux/s390/sys/ucontext.h (__ctx): New macro.
(__psw_t): Use __ctx in defining fields.
(NGREG): Rename to __NGREG and define NGREG to __NGREG if
[__USE_MISC].
(gregset_t): Define using __NGREG.
(fpreg_t): Use __ctx in defining fields.
(fpregset_t): Likewise.
(mcontext_t): Likewise.
* sysdeps/unix/sysv/linux/sh/sys/ucontext.h (NGREG): Rename to
__NGREG and define NGREG to __NGREG if [__USE_MISC].
(gregset_t): Define using __NGREG.
(NFPREG): Rename to __NFPREG and define NFPREG to __NFPREG if
[__USE_MISC].
(fpregset_t): Define using __NFPREG.
(__ctx): New macro.
(mcontext_t): Use __ctx in defining fields.
* sysdeps/unix/sysv/linux/x86/sys/ucontext.h (__ctx): New macro.
[__x86_64__] (NGREG): Rename to __NGREG and define NGREG to
__NGREG if [__USE_MISC].
[__x86_64__] (gregset_t): Define using __NGREG.
[__x86_64__] (struct _libc_fpxreg): Use __ctx in defining fields.
[__x86_64__] (struct _libc_fpstate): Likewise.
[__x86_64__] (mcontext_t): Likewise.
[!__x86_64__] (NGREG): Rename to __NGREG and define NGREG to
__NGREG if [__USE_MISC].
[!__x86_64__] (gregset_t): Define using __NGREG.
[!__x86_64__] (struct _libc_fpreg): Use __ctx in defining fields.
[!__x86_64__] (struct _libc_fpstate): Likewise.
[!__x86_64__] (mcontext_t): Likewise.
libpthread used to have its own vfork implementation that differed
from libc's only in having a pointless micro-optimization. There is
no longer any use to having a separate copy in libpthread, but the
historical ABI requires a compatibility shim. microblaze was trying
to be slightly too clever about how it did this, and tickled a linker
bug. The linker bug should get fixed eventually, but there's no
reason for us to keep tickling it in the meantime.
This doesn't reuse the generic pt-vfork.c because microblaze doesn't
have IFUNC support yet, and it doesn't reuse aarch64/pt-vfork.c
because that fails to generate a tailcall (with GCC 7.1.1).
* sysdeps/unix/sysv/linux/microblaze/pt-vfork.S: Don't include
alpha/pt-vfork.S. Provide own compat shim for vfork and __vfork.
* sysdeps/unix/sysv/linux/microblaze/vfork.S: Add __libc_vfork alias.
* sysdeps/unix/sysv/linux/microblaze/localplt.data:
libpthread.so no longer references __errno_location.
This patch adds support of preadv2 and pwritev2 which are similar to
preadv/pwritev but with an extra flag argument. As for preadv/pwritev
both interfaces are added a non-standard GNU API.
For default 'posix' implementation trying to emulate the Linux supported
flags is troublesome:
* We can not temporary change the file state of the O_DSYNC and O_SYNC
flags to emulate RWF_{D}SYNC (attempts to change the state of using
fcntl are silently ignored).
* IOCB_HIPRI requires the file opened in O_DIRECT and uses an internal
semantic not provided by any other flag (O_NONBLOCK for instance).
So default sysdeps/posix implementations fails with EOPNOTSUPP for any non
supported flag (which are none currently) calls generic preadv/pwritev.
Basically this implementation supports only preadv2 called as preadv (with
flags sets to 0).
The Linux one uses the preadv2/pwritev2 syscall if defined, otherwise it
call preadv/writev. Instead of using the previous __ASSUME_* to
unconditionally issue the syscall (and avoid building the fallback routine),
it call pread/write if the preadv2/pwritev2 syscalls fails. The idea
is just avoid adding another __ASSUME_* and checking each architecture
on every kernel bump and simplify code conditionals.
Checked on x86_64-linux-gnu and on i686-linux-gnu and a check with
run-built-tests=no on aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabihf,
ia64-linux-gnu, m68k-linux-gnu, microblaze-linux-gnu, mips{64,64n32}-linux-gnu,
nios2-linux-gnu, powerpc{64,64le}-linux-gnu, s390{x}-linux-gnu,
sparc{64,v9}-linux-gnu, tile{gx,pro}-linux-gnu, and sh4-linux-gnu (all using
gcc 6.3).
* NEWS: Add note about pwritev2 and preadv2 inclusion.
* misc/Makefile (routines): Add preadv2, preadv64v2, pwritev2, and
pwritev64v2.
(tests): Add tst-preadvwritev2 and tst-preadvwritev64v2.
* misc/Versions (GLIBC_2.26): Add preadv2, preadv64v2, pwritev2, and
pwritev64v2.
* misc/preadv2.c: New file.
* misc/preadv64v2.c: Likewise.
* misc/pwritev2.c: Likewise.
* misc/pwritev64v2.c: Likewise.
* misc/tst-preadvwritev2.c: Likewise.
* misc/tst-preadvwritev64v2.c: Likewise.
* manual/llio.texi: Add preadv2 and pwritev2 documentation.
* misc/sys/uio.h [__USE_GNU && !__USE_FILE_OFFSET64] (preadv2): New
prototype.
[__USE_GNU && !__USE_FILE_OFFSET64] (pwritev2): Likewise.
[__USE_GNU && __USE_FILE_OFFSET64] (preadv64v2): Likewise.
[__USE_GNU && __USE_FILE_OFFSET64] (pwritev64v2): Likewise.
* misc/tst-preadvwritev-common.c (PREADV): Define if not defined.
(PWRITEV): Likewise.
(do_test_with_offset): Use PREADV and PWRITEV macros and check for
ENOSYS.
* nptl/tst-cancel4.c (tf_pwritev2): New test.
(tf_preadv2): Likewise.
(tf_fsync): Add tf_pwritev2 and tf_preadv2.
* sysdeps/posix/preadv2.c: Likewise.
* sysdeps/posix/preadv64v2.c: Likewise.
* sysdeps/posix/pwritev2.c: Likewise.
* sysdeps/posix/pwritev64v2.c: Likewise.
* sysdeps/unix/sysv/linux/kernel-features.h: Add comment for syscall
support in kernel.
* sysdeps/unix/sysv/linux/preadv2.c: Likewise.
* sysdeps/unix/sysv/linux/preadv64v2.c: Likewise.
* sysdeps/unix/sysv/linux/pwritev2.c: Likewise.
* sysdeps/unix/sysv/linux/pwritev64v2.c: Likewise.
* sysdeps/unix/sysv/linux/preadv.c (preadv): Add libc_hidden_def.
* sysdeps/unix/sysv/linux/preadv64.c (preadv64): Likewise.
* sysdeps/unix/sysv/linux/pwritev.c (pwritev): Likewise.
* sysdeps/unix/sysv/linux/pwritev64.c (pwritev64): Likewise.
* sysdeps/unix/sysv/linux/bits/uio.h: Add supported preadv2/pwritev2
support flags on Linux.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist (GLIBC_2.26): Add
preadv2, preadv64v2, pwritev2, pwritev64v2.
* sysdeps/unix/sysv/linux/alpha/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/arm/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist
(GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist
(GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist
(GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/sysv/linux/tile/tilegx/tilegx32/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/sysv/linux/tile/tilegx/tilegx64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist (GLIBC_2.26):
Likewise.
Allow the CPU features structure set up to be overridden by tunables
by delaying it to until after tunables are initialized. The
initialization is already delayed in dynamically linked glibc, it is
only in static binaries that the initialization is set early to allow
it to influence IFUNC relocations that happen in libc-start. It is a
bit too early however and there is a good place between tunables
initialization and IFUNC relocations where this can be done.
Verified that this does not regress the testsuite.
* csu/libc-start.c [!ARCH_INIT_CPU_FEATURES]: Define
ARCH_INIT_CPU_FEATURES.
(LIBC_START_MAIN): Call it.
* sysdeps/unix/sysv/linux/aarch64/libc-start.c
(__libc_start_main): Remove.
(ARCH_INIT_CPU_FEATURES): New macro.
* sysdeps/x86/libc-start.c (__libc_start_main): Remove.
(ARCH_INIT_CPU_FEATURES): New macro.
By x86-64 specification, 32-bit destination registers are zero-extended
to 64 bits. There is no need to use 64-bit registers when only the lower
32 bits are non-zero.
* sysdeps/x86_64/memchr.S (MEMCHR): Use 32-bit registers for
the lower 32 bits.
The following tests depend on ENABLE_LOCK_ELISION, which is only
available on tests-internal.
- nptl/tst-mutex8
- nptl/tst-mutex8-static
- nptl/tst-mutexpi8
- nptl/tst-mutexpi8-static
* nptl/Makefile (tests): Move nptl/tst-mutex8, nptl/tst-mutex8-static,
nptl/tst-mutexpi8 and nptl/tst-mutexpi8-static to...
(tests-internal): ... here.
Since __tunables_init is internal to ld.so, we should mark it hidden
to avoid PLT. We should also avoid PLT when calling __tunable_set_val
within ld.so.
2017-05-25 Siddhesh Poyarekar <siddhesh@sourceware.org>
H.J. Lu <hongjiu.lu@intel.com>
* elf/dl-tunables.c (__tunable_set_val): Make a hidden alias.
* elf/dl-tunables.h (__tunables_init): Mark it hidden in rtld.
(__tunable_set_val): Likewise.
We can put processor specific tunables in dl-tunables.list under
sysdeps instead of in elf/dl-tunables.list.
* Makeconfig ($(common-objpfx)dl-tunable-list.h): Also check
dl-tunables.list in subdirectories.
This change defines float128_private.h which contains
macros used to override long double naming conventions
when building a ldbl file.
* math/math.h [__HAVE_FLOAT128 && __GLIBC_USE (IEC_60559_TYPES_EXT)]
(SNANF128): New macro.
* math/e_sqrtf128.c: New file.
* math/s_fmaxmag_template.c: Include math_private.h in order to
make inline expansion of fabs128().
* math/s_fminmag_template.c: Likewise.
* sysdeps/ieee754/float128/e_acosf128.c: New file.
* sysdeps/ieee754/float128/e_acoshf128.c: New file.
* sysdeps/ieee754/float128/e_asinf128.c: New file.
* sysdeps/ieee754/float128/e_atan2f128.c: New file.
* sysdeps/ieee754/float128/e_atanhf128.c: New file.
* sysdeps/ieee754/float128/e_coshf128.c: New file.
* sysdeps/ieee754/float128/e_exp10f128.c: New file.
* sysdeps/ieee754/float128/e_expf128.c: New file.
* sysdeps/ieee754/float128/e_fmodf128.c: New file.
* sysdeps/ieee754/float128/e_gammaf128_r.c: New file.
* sysdeps/ieee754/float128/e_hypotf128.c: New file.
* sysdeps/ieee754/float128/e_ilogbf128.c: New file.
* sysdeps/ieee754/float128/e_j0f128.c: New file.
* sysdeps/ieee754/float128/e_j1f128.c: New file.
* sysdeps/ieee754/float128/e_jnf128.c: New file.
* sysdeps/ieee754/float128/e_lgammaf128_r.c: New file.
* sysdeps/ieee754/float128/e_log10f128.c: New file.
* sysdeps/ieee754/float128/e_log2f128.c: New file.
* sysdeps/ieee754/float128/e_logf128.c: New file.
* sysdeps/ieee754/float128/e_powf128.c: New file.
* sysdeps/ieee754/float128/e_rem_pio2f128.c: New file.
* sysdeps/ieee754/float128/e_remainderf128.c: New file.
* sysdeps/ieee754/float128/e_scalbf128.c: New file.
* sysdeps/ieee754/float128/e_sinhf128.c: New file.
* sysdeps/ieee754/float128/float128_private.h: New file.
* sysdeps/ieee754/float128/gamma_productf128.c: New file.
* sysdeps/ieee754/float128/ieee754_float128.h: New file.
* sysdeps/ieee754/float128/k_cosf128.c: New file.
* sysdeps/ieee754/float128/k_sincosf128.c: New file.
* sysdeps/ieee754/float128/k_sinf128.c: New file.
* sysdeps/ieee754/float128/k_tanf128.c: New file.
* sysdeps/ieee754/float128/lgamma_negf128.c: New file.
* sysdeps/ieee754/float128/lgamma_productf128.c: New file.
* sysdeps/ieee754/float128/s_asinhf128.c: New file.
* sysdeps/ieee754/float128/s_atanf128.c: New file.
* sysdeps/ieee754/float128/s_cbrtf128.c: New file.
* sysdeps/ieee754/float128/s_ceilf128.c: New file.
* sysdeps/ieee754/float128/s_copysignf128.c: New file.
* sysdeps/ieee754/float128/s_cosf128.c: New file.
* sysdeps/ieee754/float128/s_erff128.c: New file.
* sysdeps/ieee754/float128/s_expm1f128.c: New file.
* sysdeps/ieee754/float128/s_fabsf128.c: New file.
* sysdeps/ieee754/float128/s_finitef128.c: New file.
* sysdeps/ieee754/float128/s_floorf128.c: New file.
* sysdeps/ieee754/float128/s_fmaf128.c: New file.
* sysdeps/ieee754/float128/s_fpclassifyf128.c: New file.
* sysdeps/ieee754/float128/s_frexpf128.c: New file.
* sysdeps/ieee754/float128/s_fromfpf128.c: New file.
* sysdeps/ieee754/float128/s_fromfpxf128.c: New file.
* sysdeps/ieee754/float128/s_getpayloadf128.c: New file.
* sysdeps/ieee754/float128/s_isinff128.c: New file.
* sysdeps/ieee754/float128/s_isnanf128.c: New file.
* sysdeps/ieee754/float128/s_issignalingf128.c: New file.
* sysdeps/ieee754/float128/s_llrintf128.c: New file.
* sysdeps/ieee754/float128/s_llroundf128.c: New file.
* sysdeps/ieee754/float128/s_log1pf128.c: New file.
* sysdeps/ieee754/float128/s_logbf128.c: New file.
* sysdeps/ieee754/float128/s_lrintf128.c: New file.
* sysdeps/ieee754/float128/s_lroundf128.c: New file.
* sysdeps/ieee754/float128/s_modff128.c: New file.
* sysdeps/ieee754/float128/s_nearbyintf128.c: New file.
* sysdeps/ieee754/float128/s_nextafterf128.c: New file.
* sysdeps/ieee754/float128/s_nexttowardf128.c: New file.
* sysdeps/ieee754/float128/s_nextupf128.c: New file.
* sysdeps/ieee754/float128/s_remquof128.c: New file.
* sysdeps/ieee754/float128/s_rintf128.c: New file.
* sysdeps/ieee754/float128/s_roundevenf128.c: New file.
* sysdeps/ieee754/float128/s_roundf128.c: New file.
* sysdeps/ieee754/float128/s_scalblnf128.c: New file.
* sysdeps/ieee754/float128/s_scalbnf128.c: New file.
* sysdeps/ieee754/float128/s_setpayloadf128.c: New file.
* sysdeps/ieee754/float128/s_setpayloadsigf128.c: New file.
* sysdeps/ieee754/float128/s_signbitf128.c: New file.
* sysdeps/ieee754/float128/s_significandf128.c: New file.
* sysdeps/ieee754/float128/s_sincosf128.c: New file.
* sysdeps/ieee754/float128/s_sinf128.c: New file.
* sysdeps/ieee754/float128/s_tanf128.c: New file.
* sysdeps/ieee754/float128/s_tanhf128.c: New file.
* sysdeps/ieee754/float128/s_totalorderf128.c: New file.
* sysdeps/ieee754/float128/s_totalordermagf128.c: New file.
* sysdeps/ieee754/float128/s_truncf128.c: New file.
* sysdeps/ieee754/float128/s_ufromfpf128.c: New file.
* sysdeps/ieee754/float128/s_ufromfpxf128.c: New file.
* sysdeps/ieee754/float128/t_sincosf128.c: New file.
* sysdeps/ieee754/float128/x2y2m1f128.c: New file.
* sysdeps/ieee754/ldbl-128ibm/bits/iscanonical.h:
(__iscanonicalf128): Define as a macro.
I just noticed that the array count for the hwcap flags list in ARM is
off by 10, i.e. 37 instead of 27. Following patch fixes this.
* sysdeps/unix/sysv/linux/arm/dl-procinfo.c
(_dl_arm_cap_flags): Fix array subscript.
* sysdeps/unix/sysv/linux/arm/dl-procinfo.h (_DL_HWCAP_COUNT):
Fix count.
Remove is_intel, is_amd and max_cpuid macros. Use __get_cpu_features
to get cpu_features instead.
* sysdeps/x86/cacheinfo.c (is_intel): Removed.
(is_amd): Likewise.
(max_cpuid): Likewise.
(__cache_sysconf): Use __get_cpu_features to get cpu_features.
(init_cacheinfo): Likewise.
The sigstack function was removed in the 2001 edition of POSIX, and
the sigstack structure in the 2008 edition. signal.h wrongly includes
those declarations even for newer POSIX versions. This patch fixes
the conditions, and conform/ expectations, accordingly.
This patch makes the minimum change to when these declarations are
present, leaving them visible for __USE_MISC as they would previously
have been visible by default. Arguably these legacy declarations
should only be visible when an old standard is specifically requested,
but implementing that would require arranging for the various sigstack
implementations to be able to see the struct sigstack type despite it
not being in _GNU_SOURCE in that case.
Tested for x86_64.
[BZ #21511]
* signal/signal.h: Include <bits/types/struct_sigstack.h> only if
[(__USE_XOPEN_EXTENDED && !__USE_XOPEN2K8) || __USE_MISC].
(sigstack): Declare only if [(__USE_XOPEN_EXTENDED &&
!__USE_XOPEN2K) || __USE_MISC].
* conform/data/signal.h-data (struct sigstack): Expect type only
if [!XOPEN2K8 && !POSIX2008].
(sigstack): Expect function only if [XPG42 || UNIX98].
The various sys/ucontext.h headers include <signal.h> and all the
headers split out of <bits/sigstack.h>. (Except that the powerpc
version does not include <signal.h>.)
None of the standard versions defining ucontext.h require or permit
such inclusions; rather, they all say that the stack_t and sigset_t
types from signal.h are defined. This patch fixes the headers to
include just the bits/ headers for those types (and the existing
includes of bits/sigcontext.h). Since bits/types/sigset_t.h is now
being included instead of bits/types/__sigset_t.h, __sigset_t uses in
the headers are replaced by direct use of the public sigset_t type.
sysdeps/unix/sysv/linux/x86/bits/sigcontext.h was relying on the prior
inclusion of <signal.h> to define types such as __uint32_t, so gets a
bits/types.h include added to provide those types.
Although one could keep some or all of the includes under a __USE_MISC
conditional, that seems unnecessary to me, especially given the lack
of a <signal.h> include in the powerpc version meaning that portable
programs already cannot rely on such an include.
Tested for x86_64 and x86, and with build-many-glibcs.py. As with
other such fixes, more namespace issues remain so this does not permit
any XFAILs to be removed or bugs to be closed.
[BZ #21457]
* sysdeps/arm/sys/ucontext.h: Do not include <signal.h>,
<bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of
<bits/types/__sigset_t.h>.
(ucontext_t): Use sigset_t instead of __sigset_t.
* sysdeps/generic/sys/ucontext.h: Do not include <signal.h>,
<bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of
<bits/types/__sigset_t.h>.
(ucontext_t): Use sigset_t instead of __sigset_t.
* sysdeps/i386/sys/ucontext.h: Do not include <signal.h>,
<bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of
<bits/types/__sigset_t.h>.
(ucontext_t): Use sigset_t instead of __sigset_t.
* sysdeps/m68k/sys/ucontext.h: Do not include <signal.h>,
<bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of
<bits/types/__sigset_t.h>.
(ucontext_t): Use sigset_t instead of __sigset_t.
* sysdeps/mips/sys/ucontext.h: Do not include <signal.h>,
<bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of
<bits/types/__sigset_t.h>.
(ucontext_t): Use sigset_t instead of __sigset_t.
* sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h: Do not include
<signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of
<bits/types/__sigset_t.h>.
(ucontext_t): Use sigset_t instead of __sigset_t.
* sysdeps/unix/sysv/linux/alpha/sys/ucontext.h: Do not include
<signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of
<bits/types/__sigset_t.h>.
(ucontext_t): Use sigset_t instead of __sigset_t.
* sysdeps/unix/sysv/linux/arm/sys/ucontext.h: Do not include
<signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of
<bits/types/__sigset_t.h>.
(ucontext_t): Use sigset_t instead of __sigset_t.
* sysdeps/unix/sysv/linux/hppa/sys/ucontext.h: Do not include
<signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of
<bits/types/__sigset_t.h>.
(ucontext_t): Use sigset_t instead of __sigset_t.
* sysdeps/unix/sysv/linux/ia64/sys/ucontext.h: Do not include
<signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h>.
* sysdeps/unix/sysv/linux/m68k/sys/ucontext.h: Do not include
<signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of
<bits/types/__sigset_t.h>.
(ucontext_t): Use sigset_t instead of __sigset_t.
* sysdeps/unix/sysv/linux/mips/sys/ucontext.h: Do not include
<signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of
<bits/types/__sigset_t.h>.
(ucontext_t): Use sigset_t instead of __sigset_t.
* sysdeps/unix/sysv/linux/nios2/sys/ucontext.h: Do not include
<signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of
<bits/types/__sigset_t.h>.
(ucontext_t): Use sigset_t instead of __sigset_t.
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h: Do not include
<bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>.
* sysdeps/unix/sysv/linux/s390/sys/ucontext.h: Do not include
<signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of
<bits/types/__sigset_t.h>.
(ucontext_t): Use sigset_t instead of __sigset_t.
* sysdeps/unix/sysv/linux/sh/sys/ucontext.h: Do not include
<signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of
<bits/types/__sigset_t.h>.
(ucontext_t): Use sigset_t instead of __sigset_t.
* sysdeps/unix/sysv/linux/sparc/sys/ucontext.h: Do not include
<signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of
<bits/types/__sigset_t.h>.
(ucontext_t): Use sigset_t instead of __sigset_t.
* sysdeps/unix/sysv/linux/tile/sys/ucontext.h: Do not include
<signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of
<bits/types/__sigset_t.h>.
(ucontext_t): Use sigset_t instead of __sigset_t.
* sysdeps/unix/sysv/linux/x86/bits/sigcontext.h: Include
<bits/types.h>.
* sysdeps/unix/sysv/linux/x86/sys/ucontext.h: Do not include
<signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of
<bits/types/__sigset_t.h>.
(ucontext_t): Use sigset_t instead of __sigset_t.
siginfo-arch.h is included in two different places, so the default
definitions of the macros that it might or might not define need to
be done conditionally afterward, not unconditionally beforehand.
* sysdeps/unix/sysv/linux/bits/siginfo-consts.h
(__SI_ASYNCIO_AFTER_SIGIO): Define default after including
bits/siginfo-arch.h, only if not already defined.
* sysdeps/unix/sysv/linux/bits/types/siginfo_t.h
(__SI_ALIGNMENT, __SI_BAND_TYPE, __SI_CLOCK_T)
(__SI_ERRNO_THEN_CODE, __SI_HAVE_SIGSYS, __SI_SEGFAULT_ADDL):
Likewise.
* sysdeps/unix/sysv/linux/ia64/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/mips/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/sparc/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/tile/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/x86/bits/siginfo-arch.h:
Unconditionally define __SI_* macros.
As described in BZ#21398 (close as dup of 21393) report current
freopen implementation fails when one tries to freopen STDIN_FILENO,
STDOUT_FILENO, or STDERR_FILENO. Although on bug report the
discussion leads to argue if a close followed by a freopen on the
standard file is a valid operation, the underlying issue is not
really the check for dup3 returned value, but rather calling it
if the returned file descriptor is equal as the input one.
So for a quality of implementation this patch avoid calling dup3
for the aforementioned case. It also adds a dup3 error case check
for the two possible failures, with one being Linux only: EINTR and
EBUSY. The EBUSY issue is better explained on this stackoverflow
thread [1], but in a short it is due the internal Linux
implementation which allows a race condition window for dup2 due
the logic dissociation of file descriptor allocation and actual
VFS 'install' operation. For both outliers failures all allocated
memory is freed and a NULL FILE* is returned.
With this patch the example on BZ#21398 is now actually possible
(I used as the testcase for the bug report). Checked on
x86_64-linux-gnu.
[BZ #21393]
* libio/freopen.c (freopen): Avoid dup already opened file descriptor
and add a check for dup3 failure.
* libio/freopen64.c (freopen64): Likewise.
* libio/tst-freopen.c (do_test): Rename to do_test_basic and use
libsupport.
(do_test_bz21398): New test.
* manual/stdio.texi (freopen): Add documentation of EBUSY failure.
[1] http://stackoverflow.com/questions/23440216/race-condition-when-using-dup2
David Miller has not been shot yet AFAIK (yes, I googled for any news
that may seem relevant and I poked him on twitter some days ago) so
either nobody uses SPARC or the code is correct or nobody read the
instructions in the comment to shoot him. In all of those cases the
comment is clearly not useful, so getting rid of it.
The types affected are __sig_atomic_t, sig_atomic_t, __sigset_t,
sigset_t, sigval_t, sigevent_t, and siginfo_t. __sig_atomic_t is a
scalar, so it's now directly available from bits/types.h. The others
get bits/types/ headers.
Side effects include: There have been small changes to which
non-signal headers expose which subset of the signal-related types.
A couple of architectures' nested siginfo_t fields had to be renamed
to prevent undesired macro expansion. Internal code that wants to
manipulate signal masks must now include <sigsetops.h> (which is not
installed) and should be aware that __sigaddset, __sigandset,
__sigdelset, __sigemptyset, and __sigorset no longer return a value
(unlike the public API). Relatedly, the public signal.h no longer
declares any of those functions. The obsolete sigmask() macro no
longer has a system-specific definition -- in the cases where it
matters, it didn't work anyway.
New Linux architectures should create bits/siginfo-arch.h and/or
bits/siginfo-consts-arch.h to customize their siginfo_t, rather than
duplicating everything in bits/siginfo.h (which no longer exists).
Add new __SI_* macros if necessary. Ports to other operating systems
are strongly encouraged to generalize this scheme further.
* bits/sigevent-consts.h
* bits/siginfo-consts.h
* bits/types/__sigset_t.h
* bits/types/sigevent_t.h
* bits/types/siginfo_t.h
* sysdeps/unix/sysv/linux/bits/sigevent-consts.h
* sysdeps/unix/sysv/linux/bits/siginfo-consts.h
* sysdeps/unix/sysv/linux/bits/types/__sigset_t.h
* sysdeps/unix/sysv/linux/bits/types/sigevent_t.h
* sysdeps/unix/sysv/linux/bits/types/siginfo_t.h:
New system-dependent bits headers.
* sysdeps/unix/sysv/linux/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/bits/siginfo-consts-arch.h
* sysdeps/unix/sysv/linux/ia64/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/ia64/bits/siginfo-consts-arch.h
* sysdeps/unix/sysv/linux/mips/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/sparc/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/tile/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/tile/bits/siginfo-consts-arch.h
* sysdeps/unix/sysv/linux/x86/bits/siginfo-arch.h:
New Linux-only system-dependent bits headers.
* signal/bits/types/sig_atomic_t.h
* signal/bits/types/sigset_t.h
* signal/bits/types/sigval_t.h:
New non-system-dependent bits headers.
* sysdeps/generic/sigsetops.h
* sysdeps/unix/sysv/linux/sigsetops.h:
New internal headers.
* include/bits/types/sig_atomic_t.h
* include/bits/types/sigset_t.h
* include/bits/types/sigval_t.h:
New wrappers.
* signal/sigsetops.h
* bits/siginfo.h
* bits/sigset.h
* sysdeps/unix/sysv/linux/bits/siginfo.h
* sysdeps/unix/sysv/linux/bits/sigset.h
* sysdeps/unix/sysv/linux/ia64/bits/siginfo.h
* sysdeps/unix/sysv/linux/mips/bits/siginfo.h
* sysdeps/unix/sysv/linux/s390/bits/siginfo.h
* sysdeps/unix/sysv/linux/sparc/bits/siginfo.h
* sysdeps/unix/sysv/linux/tile/bits/siginfo.h
* sysdeps/unix/sysv/linux/x86/bits/siginfo.h:
Deleted.
* signal/Makefile, sysdeps/unix/sysv/linux/Makefile:
Update lists of installed headers.
* posix/bits/types.h: Define __sig_atomic_t here.
* signal/signal.h: Use the new bits headers; no need to handle
__need_sig_atomic_t nor __need_sigset_t. Don't use __sigmask
to define sigmask.
* include/signal.h: No need to handle __need_sig_atomic_t
nor __need_sigset_t. Don't define __sigemptyset.
* io/sys/poll.h, setjmp/setjmp.h
* sysdeps/arm/sys/ucontext.h, sysdeps/generic/sys/ucontext.h
* sysdeps/i386/sys/ucontext.h, sysdeps/m68k/sys/ucontext.h
* sysdeps/mach/hurd/i386/bits/sigcontext.h
* sysdeps/mips/sys/ucontext.h, sysdeps/powerpc/novmxsetjmp.h
* sysdeps/pthread/bits/sigthread.h
* sysdeps/unix/sysv/linux/hppa/sys/ucontext.h
* sysdeps/unix/sysv/linux/m68k/sys/ucontext.h
* sysdeps/unix/sysv/linux/mips/sys/ucontext.h
* sysdeps/unix/sysv/linux/nios2/sys/ucontext.h
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h
* sysdeps/unix/sysv/linux/s390/sys/ucontext.h
* sysdeps/unix/sysv/linux/sh/sys/ucontext.h
* sysdeps/unix/sysv/linux/sparc/sys/ucontext.h
* sysdeps/unix/sysv/linux/tile/sys/ucontext.h
* sysdeps/unix/sysv/linux/x86/sys/ucontext.h:
Use bits/types/__sigset_t.h.
* misc/sys/select.h, posix/spawn.h
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h
* sysdeps/unix/sysv/linux/sys/epoll.h
* sysdeps/unix/sysv/linux/sys/signalfd.h:
Use bits/types/sigset_t.h.
* resolv/netdb.h, rt/mqueue.h: Use bits/types/sigevent_t.h.
* rt/aio.h: Use bits/types/sigevent_t.h and bits/sigevent-consts.h.
* socket/sys/socket.h: Don't include bits/sigset.h.
* login/utmp_file.c, shadow/lckpwdf.c, signal/sigandset.c
* signal/sigisempty.c, stdlib/abort.c, sysdeps/posix/profil.c
* sysdeps/posix/sigignore.c, sysdeps/posix/sigintr.c
* sysdeps/posix/signal.c, sysdeps/posix/sigset.c
* sysdeps/posix/sprofil.c, sysdeps/posix/sysv_signal.c
* sysdeps/unix/sysv/linux/nptl-signals.h:
Include sigsetops.h.
* signal/sigaddset.c, signal/sigandset.c, signal/sigdelset.c
* signal/sigorset.c, stdlib/abort.c, sysdeps/posix/sigignore.c
* sysdeps/posix/signal.c, sysdeps/posix/sigset.c:
__sigaddset, __sigandset, __sigdelset, __sigemptyset, __sigorset
now return no value.
* signal/sigaddset.c, signal/sigdelset.c, signal/sigismem.c
Include <errno.h>, <signal.h>, and <sigsetops.h> instead of
"sigsetops.h".
* signal/sigsetops.c: Explicitly define __sigismember,
__sigaddset, and __sigdelset as compatibility symbols.
* signal/Versions: Correct commentary on __sigpause,
__sigaddset, __sigdelset, __sigismember.
* inet/rcmd.c: Include sigsetops.h. Convert old code using
__sigblock/__sigsetmask to use __sigprocmask and friends.
These __need macros are only used internally, by nptl/descr.h.
However, including all of resolv.h from descr.h causes build failures
due to resolv.h's dozens of pseudo-struct-field macros, some of which
collide with struct fields in NPTL internal data structures.
Similarly, including all of list.h from descr.h produces an include
cycle, atomic.h -> atomic-machine.h -> tls.h -> descr.h -> list.h ->
atomic.h, and then list.h tries to use atomic.h macros that haven't
been defined yet. So we do need mini-headers for these. In the
list.h case I called it include/list_t.h since it isn't going to be
installed.
* resolv/resolv.h: Remove __need_res_state logic.
Move definition of res_state and related constants to ...
* resolv/bits/types/res_state.h: ...this new file.
* resolv/Makefile: Install bits/types/res_state.h.
* include/bits/types/res_state.h: New wrapper.
* include/list.h: Remove __need_list_t logic.
Move definition of list_t to ...
* include/list_t.h: ...this new file.
* nptl/descr.h: Include list_t.h and bits/types/res_state.h
instead of list.h and resolv.h.
This semi-mechanical patch removes all uses and definitions of the
sfi_breg, sfi_pld, and sfi_sp macros from various ARM-specific
assembly files. These were only used by NaCl.
* sysdeps/arm/sysdep.h
(ARM_SFI_MACROS, sfi_breg, sfi_pld, sfi_sp): Delete definitions.
* sysdeps/arm/__longjmp.S, sysdeps/arm/add_n.S
* sysdeps/arm/addmul_1.S, sysdeps/arm/arm-mcount.S
* sysdeps/arm/armv6/rawmemchr.S, sysdeps/arm/armv6/strchr.S
* sysdeps/arm/armv6/strcpy.S, sysdeps/arm/armv6/strlen.S
* sysdeps/arm/armv6/strrchr.S, sysdeps/arm/armv6t2/memchr.S
* sysdeps/arm/armv6t2/strlen.S
* sysdeps/arm/armv7/multiarch/memcpy_impl.S
* sysdeps/arm/armv7/strcmp.S, sysdeps/arm/dl-tlsdesc.S
* sysdeps/arm/memcpy.S, sysdeps/arm/memmove.S
* sysdeps/arm/memset.S, sysdeps/arm/setjmp.S
* sysdeps/arm/strlen.S, sysdeps/arm/submul_1.S:
Remove all uses of sfi_breg, sfi_pld, and sfi_sp.
The NaCl port has not been actively maintained since before the 2.25
release. The complementary GCC back-end was never contributed to GCC,
and we are given to understand that the current NaCl SDK has switched
to Clang and therefore cannot be used to build glibc anymore, so we
doubt that the port remains useful.
This commit simply removes the sysdeps/arm/nacl and sysdeps/nacl
directories and the abi-tags entry.
Remove the NaCl port.
* abi-tags: Remove .*-.*-nacl.* entry.
* sysdeps/arm/nacl: Remove directory and contents.
* sysdeps/nacl: Likewise.
