glibc defines the stack_t type with the tag struct sigaltstack. This
is not permitted by POSIX; sigaltstack is only reserved with file
scope in the namespace of ordinary identifiers, not the tag namespace,
and in the case where stack_t is obtained from ucontext.h rather than
signal.h, it's not reserved with file scope at all.
This patch removes the tag accordingly and updates uses in glibc of
struct sigaltstack. This is similar to the removal of the "struct
siginfo" tag a few years ago: C++ name mangling changes are an
unavoidable consequence. A NEWS item is added to note the changed
mangling. There is inevitably some risk of breaking builds of
anything that relies on the struct sigaltstack name (though the first
few hits I looked at from codesearch.debian.net generally seemed to
involve code that could use the stack_t name conditionally, so
depending on how they determine the conditionals they may work with
glibc not defining the struct tag anyway).
Tested for x86_64 and x86, and with build-many-glibcs.py.
[BZ #21517]
* bits/types/stack_t.h (stack_t): Remove struct tag.
* sysdeps/unix/sysv/linux/bits/types/stack_t.h (stack_t):
Likewise.
* sysdeps/unix/sysv/linux/mips/bits/types/stack_t.h (stack_t):
Likewise.
* debug/segfault.c (install_handler): Use stack_t instead of
struct sigaltstack.
* hurd/hurd/signal.h (struct hurd_sigstate): Likewise.
* hurd/trampoline.c (_hurd_setup_sighandler): Likewise.
* include/signal.h (__sigaltstack): Likwise.
* signal/sigaltstack.c (__sigaltstack): Likewise.
* signal/signal.h (sigaltstack): Likewise.
* sysdeps/mach/hurd/i386/signal-defines.sym
(SIGALTSTACK__SS_SP__OFFSET): Likewise.
(SIGALTSTACK__SS_SIZE__OFFSET): Likewise.
(SIGALTSTACK__SS_FLAGS__OFFSET): Likewise.
* sysdeps/mach/hurd/sigaltstack.c (__sigaltstack): Likewise.
* sysdeps/mach/hurd/sigstack.c (sigstack): Likewise.
* sysdeps/unix/sysv/linux/alpha/sys/procfs.h (struct
elf_prstatus): Likewise.
* sysdeps/unix/sysv/linux/hppa/____longjmp_chk.c (CHECK_SP):
Likewise.
* sysdeps/unix/sysv/linux/ia64/sys/procfs.h (struct elf_prstatus):
Likewise.
* sysdeps/unix/sysv/linux/m68k/____longjmp_chk.c (CHECK_SP):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/sys/procfs.h (struct
elf_prstatus): Likewise.
* sysdeps/unix/sysv/linux/sh/sys/procfs.h (struct elf_prstatus):
Likewise.
* sysdeps/unix/sysv/linux/sys/procfs.h (struct elf_prstatus):
Likewise.
The types affected are __sig_atomic_t, sig_atomic_t, __sigset_t,
sigset_t, sigval_t, sigevent_t, and siginfo_t. __sig_atomic_t is a
scalar, so it's now directly available from bits/types.h. The others
get bits/types/ headers.
Side effects include: There have been small changes to which
non-signal headers expose which subset of the signal-related types.
A couple of architectures' nested siginfo_t fields had to be renamed
to prevent undesired macro expansion. Internal code that wants to
manipulate signal masks must now include <sigsetops.h> (which is not
installed) and should be aware that __sigaddset, __sigandset,
__sigdelset, __sigemptyset, and __sigorset no longer return a value
(unlike the public API). Relatedly, the public signal.h no longer
declares any of those functions. The obsolete sigmask() macro no
longer has a system-specific definition -- in the cases where it
matters, it didn't work anyway.
New Linux architectures should create bits/siginfo-arch.h and/or
bits/siginfo-consts-arch.h to customize their siginfo_t, rather than
duplicating everything in bits/siginfo.h (which no longer exists).
Add new __SI_* macros if necessary. Ports to other operating systems
are strongly encouraged to generalize this scheme further.
* bits/sigevent-consts.h
* bits/siginfo-consts.h
* bits/types/__sigset_t.h
* bits/types/sigevent_t.h
* bits/types/siginfo_t.h
* sysdeps/unix/sysv/linux/bits/sigevent-consts.h
* sysdeps/unix/sysv/linux/bits/siginfo-consts.h
* sysdeps/unix/sysv/linux/bits/types/__sigset_t.h
* sysdeps/unix/sysv/linux/bits/types/sigevent_t.h
* sysdeps/unix/sysv/linux/bits/types/siginfo_t.h:
New system-dependent bits headers.
* sysdeps/unix/sysv/linux/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/bits/siginfo-consts-arch.h
* sysdeps/unix/sysv/linux/ia64/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/ia64/bits/siginfo-consts-arch.h
* sysdeps/unix/sysv/linux/mips/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/sparc/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/tile/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/tile/bits/siginfo-consts-arch.h
* sysdeps/unix/sysv/linux/x86/bits/siginfo-arch.h:
New Linux-only system-dependent bits headers.
* signal/bits/types/sig_atomic_t.h
* signal/bits/types/sigset_t.h
* signal/bits/types/sigval_t.h:
New non-system-dependent bits headers.
* sysdeps/generic/sigsetops.h
* sysdeps/unix/sysv/linux/sigsetops.h:
New internal headers.
* include/bits/types/sig_atomic_t.h
* include/bits/types/sigset_t.h
* include/bits/types/sigval_t.h:
New wrappers.
* signal/sigsetops.h
* bits/siginfo.h
* bits/sigset.h
* sysdeps/unix/sysv/linux/bits/siginfo.h
* sysdeps/unix/sysv/linux/bits/sigset.h
* sysdeps/unix/sysv/linux/ia64/bits/siginfo.h
* sysdeps/unix/sysv/linux/mips/bits/siginfo.h
* sysdeps/unix/sysv/linux/s390/bits/siginfo.h
* sysdeps/unix/sysv/linux/sparc/bits/siginfo.h
* sysdeps/unix/sysv/linux/tile/bits/siginfo.h
* sysdeps/unix/sysv/linux/x86/bits/siginfo.h:
Deleted.
* signal/Makefile, sysdeps/unix/sysv/linux/Makefile:
Update lists of installed headers.
* posix/bits/types.h: Define __sig_atomic_t here.
* signal/signal.h: Use the new bits headers; no need to handle
__need_sig_atomic_t nor __need_sigset_t. Don't use __sigmask
to define sigmask.
* include/signal.h: No need to handle __need_sig_atomic_t
nor __need_sigset_t. Don't define __sigemptyset.
* io/sys/poll.h, setjmp/setjmp.h
* sysdeps/arm/sys/ucontext.h, sysdeps/generic/sys/ucontext.h
* sysdeps/i386/sys/ucontext.h, sysdeps/m68k/sys/ucontext.h
* sysdeps/mach/hurd/i386/bits/sigcontext.h
* sysdeps/mips/sys/ucontext.h, sysdeps/powerpc/novmxsetjmp.h
* sysdeps/pthread/bits/sigthread.h
* sysdeps/unix/sysv/linux/hppa/sys/ucontext.h
* sysdeps/unix/sysv/linux/m68k/sys/ucontext.h
* sysdeps/unix/sysv/linux/mips/sys/ucontext.h
* sysdeps/unix/sysv/linux/nios2/sys/ucontext.h
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h
* sysdeps/unix/sysv/linux/s390/sys/ucontext.h
* sysdeps/unix/sysv/linux/sh/sys/ucontext.h
* sysdeps/unix/sysv/linux/sparc/sys/ucontext.h
* sysdeps/unix/sysv/linux/tile/sys/ucontext.h
* sysdeps/unix/sysv/linux/x86/sys/ucontext.h:
Use bits/types/__sigset_t.h.
* misc/sys/select.h, posix/spawn.h
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h
* sysdeps/unix/sysv/linux/sys/epoll.h
* sysdeps/unix/sysv/linux/sys/signalfd.h:
Use bits/types/sigset_t.h.
* resolv/netdb.h, rt/mqueue.h: Use bits/types/sigevent_t.h.
* rt/aio.h: Use bits/types/sigevent_t.h and bits/sigevent-consts.h.
* socket/sys/socket.h: Don't include bits/sigset.h.
* login/utmp_file.c, shadow/lckpwdf.c, signal/sigandset.c
* signal/sigisempty.c, stdlib/abort.c, sysdeps/posix/profil.c
* sysdeps/posix/sigignore.c, sysdeps/posix/sigintr.c
* sysdeps/posix/signal.c, sysdeps/posix/sigset.c
* sysdeps/posix/sprofil.c, sysdeps/posix/sysv_signal.c
* sysdeps/unix/sysv/linux/nptl-signals.h:
Include sigsetops.h.
* signal/sigaddset.c, signal/sigandset.c, signal/sigdelset.c
* signal/sigorset.c, stdlib/abort.c, sysdeps/posix/sigignore.c
* sysdeps/posix/signal.c, sysdeps/posix/sigset.c:
__sigaddset, __sigandset, __sigdelset, __sigemptyset, __sigorset
now return no value.
* signal/sigaddset.c, signal/sigdelset.c, signal/sigismem.c
Include <errno.h>, <signal.h>, and <sigsetops.h> instead of
"sigsetops.h".
* signal/sigsetops.c: Explicitly define __sigismember,
__sigaddset, and __sigdelset as compatibility symbols.
* signal/Versions: Correct commentary on __sigpause,
__sigaddset, __sigdelset, __sigismember.
* inet/rcmd.c: Include sigsetops.h. Convert old code using
__sigblock/__sigsetmask to use __sigprocmask and friends.
errno.texi documents error macros, their values, and error strings in
Texinfo @comments, some of which are also used for @standards. The
purpose of this commit is to separate the standards from the error
strings so that both the @standards conversion script picks up clean
@standards and the errno documentation framework is improved.
The error names, values, and messages are consolidated in a new custom
macro, @errno. It is not clear that scripts within the sources rely
on the special Texinfo @comment-based format to generate files used
throughout the library, so the definition of @errno in macros.texi now
provides a comment indicating the dependency. The dependent scripts
are updated to use @errno, which also simplifies them a bit. The
files those scripts generate were verified to be unchanged.
The @errno macro is not visibly rendered in any way at this time, but
it does use an @cindex command to add the error string to the Concept
Index, to facilitate searching on error messages.
* manual/errno.texi: Convert @comment-based errno
documentation to @errno.
* manual/macros.texi (@errno): New macro. Consolidate errors,
their values, and messages, adding the error string to the
Concept Index. Provide a warning in the comment about
external (to the manual) dependencies.
* sysdeps/gnu/errlist.awk: Use @errno instead of @comments.
* sysdeps/mach/hurd/errnos.awk: Likewise.
This patch adds support for the POSIX_SPAWN_SETSID flag.
It was recently accepted by the Austin Group:
http://austingroupbugs.net/view.php?id=1044
Checked on x86_64
Daurnimator <quae@daurnimator.com>
Adhemerval Zanella <adhemerval.zanella@linaro.org>
[BZ #21340]
* posix/Makefile (tests): Add tst-posix_spawn-setsid to list of tests.
* posix/spawn.h: define POSIX_SPAWN_SETSID flag.
* posix/spawnattr_setflags.c (ALL_FLAGS): Add POSIX_SPAWN_SETSID to
valid flags.
* posix/tst-posix_spawn-setsid.c: Add test for POSIX_SPAWN_SETSID.
* sysdeps/mach/hurd/spawni.c (__spawni): Implementation of
POSIX_SPAWN_SETSID.
* sysdeps/posix/spawni.c (__spawni): Likewise.
* sysdeps/unix/sysv/linux/spawni.c (__spawni_child): Likewise.
* NEWS: Add note about POSIX_SPAWN_SETSID support.
Simplify the Linux accept4 implementation based on the assumption
that it is available in some way. __ASSUME_ACCEPT4_SOCKETCALL was
previously unused, so remove it.
For ia64, the accept4 system call (and socket call) were backported
in kernel version 3.2.18. Reflect this in the installation
instructions.
glibc's implementation of getopt includes code to parse an environment
variable named _XXX_GNU_nonoption_argv_flags_ (where XXX is the
current process's PID in decimal); but all of it has been #ifdefed out
since 2001, with no official way to turn it back on.
According to commentary in our config.h.in, bash version 2.0 set this
environment variable to indicate argv elements that were the result of
glob expansion and therefore should not be treated as options, but the
feature was "disabled later" because "it caused problems". According
to bash's CHANGES file, "later" was release 2.01; it gives no more
detail about what the problems were.
Version 2.0 of bash was released on the last day of 1996, and version
2.01 in June of 1997. Twenty years later, I think it is safe to
assume that this environment variable isn't coming back.
* config.h.in (USE_NONOPTION_FLAGS): Remove.
* csu/init-first.c: Remove all #ifdef USE_NONOPTION_FLAGS blocks.
* sysdeps/mach/hurd/i386/init-first.c: Likewise.
* posix/getopt_int.h: Likewise.
* posix/getopt.c: Likewise. Also remove SWAP_FLAGS and the
__libc_argc and __libc_argv externs, which were only used by
#ifdef USE_NONOPTION_FLAGS blocks.
* posix/getopt_init.c: Remove file.
* posix/Makefile (routines): Remove getopt_init.
* include/getopt.h: Don't declare __getopt_initialize_environment.
* manual/getopt.texi: Remove mention of USE_NONOPTION_FLAGS in
a comment.
Thanks David Michael for the suggestion.
* sysdeps/mach/hurd/send.c (__send): Convert hurdish error code into
posix error code.
* sysdeps/mach/hurd/recv.c (__recv): Likewise.
The tunables framework allows us to uniformly manage and expose global
variables inside glibc as switches to users. tunables/README has
instructions for glibc developers to add new tunables.
Tunables support can be enabled by passing the --enable-tunables
configure flag to the configure script. This patch only adds a
framework and does not pose any limitations on how tunable values are
read from the user. It also adds environment variables used in malloc
behaviour tweaking to the tunables framework as a PoC of the
compatibility interface.
* manual/install.texi: Add --enable-tunables option.
* INSTALL: Regenerate.
* README.tunables: New file.
* Makeconfig (CPPFLAGS): Define TOP_NAMESPACE.
(before-compile): Generate dl-tunable-list.h early.
* config.h.in: Add HAVE_TUNABLES.
* config.make.in: Add have-tunables.
* configure.ac: Add --enable-tunables option.
* configure: Regenerate.
* csu/init-first.c (__libc_init_first): Move
__libc_init_secure earlier...
* csu/init-first.c (LIBC_START_MAIN):... to here.
Include dl-tunables.h, libc-internal.h.
(LIBC_START_MAIN) [!SHARED]: Initialize tunables for static
binaries.
* elf/Makefile (dl-routines): Add dl-tunables.
* elf/Versions (ld): Add __tunable_set_val to GLIBC_PRIVATE
namespace.
* elf/dl-support (_dl_nondynamic_init): Unset MALLOC_CHECK_
only when !HAVE_TUNABLES.
* elf/rtld.c (process_envvars): Likewise.
* elf/dl-sysdep.c [HAVE_TUNABLES]: Include dl-tunables.h
(_dl_sysdep_start): Call __tunables_init.
* elf/dl-tunable-types.h: New file.
* elf/dl-tunables.c: New file.
* elf/dl-tunables.h: New file.
* elf/dl-tunables.list: New file.
* malloc/tst-malloc-usable-static.c: New test case.
* malloc/Makefile (tests-static): Add it.
* malloc/arena.c [HAVE_TUNABLES]: Include dl-tunables.h.
Define TUNABLE_NAMESPACE.
(DL_TUNABLE_CALLBACK (set_mallopt_check)): New function.
(DL_TUNABLE_CALLBACK_FNDECL): New macro. Use it to define
callback functions.
(ptmalloc_init): Set tunable values.
* scripts/gen-tunables.awk: New file.
* sysdeps/mach/hurd/dl-sysdep.c: Include dl-tunables.h.
(_dl_sysdep_start): Call __tunables_init.
This patch fixes some hurd bits from commit afcf3cd8eb that added the
__access_noerrno internal symbol. It basically removes the nonrequired
__hurd_fail_noerrno (since the 'err' argument is ignored) and fixes
a typo for EACCES.
However, as stated on maillist [1] this __access_noerrno may still be
unsafe to run during initialization of tunables on the Hurd. The
access_common calls __hurd_file_name_lookup, which calls
__hurd_file_name_lookup_retry, which can set errno.
[1] https://sourceware.org/ml/libc-alpha/2016-11/msg00646.html
Implement an internal version of __access called __access_noerrno that
avoids setting errno. This is useful to check accessibility of files
very early on in process startup i.e. before TLS setup. This allows
tunables to replace MALLOC_CHECK_ safely (i.e. check existence of
/etc/suid-debug to enable/disable MALLOC_CHECK) and at the same time
initialize very early so that it can override IFUNCs.
Checked on x86_64.
* hurd/hurd.h (__hurd_fail_noerrno): New function.
* include/unistd.h [IS_IN (rtld) || !defined SHARED]: Declare
__access_noerrno.
* io/access.c (__access_noerrno): New function.
* sysdeps/mach/hurd/access.c (hurd_fail_seterrno): New function.
(hurd_fail_seterrno): Likewise.
(access_common): Likewise.
(__access_noerrno): Likewise.
* sysdeps/nacl/access.c (__access_noerrno): Likewise.
* sysdeps/unix/sysv/linux/access.c (__access_noerrno): Likewise.
* sysdeps/nacl/nacl-interfaces.h (NACL_CALL_NOERRNO): New
macro.
sys/ucontext.h unconditionally uses stack_t, and it does not make
sense to change that. But signal.h only declares stack_t under
__USE_XOPEN_EXTENDED || __USE_XOPEN2K8. The actual definition is
already in a bits header, bits/sigstack.h, but that header insists on
only being included by signal.h, so we have to change that as well as
all of the sys/ucontext.h variants. (Some but not all variants of
bits/sigcontext.h, which sys/ucontext.h may also need, had already
received this adjustment; for consistency, I made them all the same,
even if that's not strictly necessary in some configurations.)
bits/sigcontext.h and bits/sigstack.h also all need to receive
multiple inclusion guards.
* sysdeps/generic/sys/ucontext.h
* sysdeps/arm/sys/ucontext.h
* sysdeps/i386/sys/ucontext.h
* sysdeps/m68k/sys/ucontext.h
* sysdeps/mips/sys/ucontext.h
* sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h
* sysdeps/unix/sysv/linux/alpha/sys/ucontext.h
* sysdeps/unix/sysv/linux/arm/sys/ucontext.h
* sysdeps/unix/sysv/linux/hppa/sys/ucontext.h
* sysdeps/unix/sysv/linux/ia64/sys/ucontext.h
* sysdeps/unix/sysv/linux/m68k/sys/ucontext.h
* sysdeps/unix/sysv/linux/mips/sys/ucontext.h
* sysdeps/unix/sysv/linux/nios2/sys/ucontext.h
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h
* sysdeps/unix/sysv/linux/s390/sys/ucontext.h
* sysdeps/unix/sysv/linux/sh/sys/ucontext.h
* sysdeps/unix/sysv/linux/sparc/sys/ucontext.h
* sysdeps/unix/sysv/linux/tile/sys/ucontext.h
* sysdeps/unix/sysv/linux/x86/sys/ucontext.h:
Include both bits/sigcontext.h and bits/sigstack.h.
Fix grammar error in comment, if present.
* bits/sigstack.h
* sysdeps/unix/sysv/linux/aarch64/bits/sigstack.h
* sysdeps/unix/sysv/linux/alpha/bits/sigstack.h
* sysdeps/unix/sysv/linux/bits/sigstack.h
* sysdeps/unix/sysv/linux/ia64/bits/sigstack.h
* sysdeps/unix/sysv/linux/mips/bits/sigstack.h
* sysdeps/unix/sysv/linux/powerpc/bits/sigstack.h
* sysdeps/unix/sysv/linux/sparc/bits/sigstack.h
* bits/sigcontext.h
* sysdeps/mach/hurd/i386/bits/sigcontext.h
* sysdeps/unix/sysv/linux/bits/sigcontext.h
* sysdeps/unix/sysv/linux/ia64/bits/sigcontext.h
* sysdeps/unix/sysv/linux/sparc/bits/sigcontext.h:
Add multiple inclusion guard. Permit inclusion by sys/ucontext.h
as well as signal.h, if this was not already allowed. Request
definition of size_t if necessary. Minimize semantically-null
differences across files.
Several network-related structures are defined conditionally under
__USE_MISC, but unconditionally used by other headers. The path of
least resistance is usually to condition the uses on __USE_MISC as
well.
* sysdeps/mach/hurd/net/if_ppp.h
* sysdeps/unix/sysv/linux/net/if_ppp.h:
Only define struct ifpppstatsreq and struct ifpppcstatsreq
if __USE_MISC is defined, to ensure struct ifreq is declared.
* inet/netinet/ether.h: Condition all function prototypes
on __USE_MISC, to ensure struct ether_addr is declared.
sys/socket.h defines struct osockaddr only under __USE_MISC, whereas
protocols/talkd.h requires it unconditionally. Here it doesn't make
sense to condition the entire body of protocols/talkd.h on __USE_MISC.
Rather than complicate sys/socket.h with a __need macro or duplicate
the definition, I am introducing a new concept: tiny headers named
bits/types/TYPE.h that define TYPE and nothing else. This can, I hope,
ultimately replace *all* the __need macros. The guard macro for such
headers will be __TYPE_defined, just in case application or third-party
library code is looking at them.
* socket/bits/types/struct_osockaddr.h: New header.
* include/bits/types/struct_osockaddr.h: New wrapper.
* socket/Makefile: Install the new header.
* socket/sys/socket.h, inet/protocols/talkd.h:
Refer to bits/types/struct_osockaddr.h for the definition of
struct osockaddr.
The types u_char, u_short, u_int, u_long, ushort, uint, ulong, u_int8_t,
u_int16_t, u_int32_t, u_int64_t, quad_t, and u_quad_t are BSDisms that
have never been standardized. While glibc should continue to *provide*
these types for compatibility's sake, its public headers should not
use them.
The meat of this change was mechanically generated by the following
shell command:
perl -pi~ -e '
s/\b(__)?u_char\b/unsigned char/g;
s/\b(__)?u_?short\b/unsigned short/g;
s/\b(__)?u_?int\b/unsigned int/g;
s/\b(__)?u_?long\b/unsigned long/g;
s/\b(__)?u_int8_t\b/uint8_t/g;
s/\b(__)?u_int16_t\b/uint16_t/g;
s/\b(__)?u_int32_t\b/uint32_t/g;
s/\b(__)?u_int64_t\b/uint64_t/g;
s/\b(__)?u_quad_t\b/uint64_t/g;
s/\b(__)?quad_t\b/uint64_t/g;
' $(grep -lE -e '\<((__)?(quad_t|u(short|int|long|_(char|short|int([0-9]+_t)?|long|quad_t))))\>' \
$(grep -LE '\<(_(SYS|BITS)_TYPES_H|rpc/(rpc|rpc_msg|types|xdr)\.h)\>' \
$(find . \( -false $(sed 's/^/-o -name /' all-installed-headers) \
\) -printf '%P\n' | sort -u)))
where 'all-installed-headers' was a list of the basenames of all installed
header files, manually extracted from the Makefiles. Non-installed
wrapper headers in include/ are also adjusted, for consistency.
I then manually fixed up indentation and line-wrapping.
sys/types.h and bits/types.h are excluded because they must continue
to define the u_* types (under __USE_MISC) for compatibility with
applications. They do not use these types themselves.
All headers that (transitively) include rpc/types.h are also excluded,
for three reasons. First, the u_* types are defined by rpc/types.h,
unconditionally (not just under __USE_MISC) so they are logically part
of the SunRPC API. Second, many of those headers appear to be
machine-generated. Third, it's my understanding that we are getting
rid of as much of SunRPC as possible in the near future.
(The one file under sunrpc/ that's touched, sunrpc/rpc/rpc_des.h, does
*not* include rpc/types.h. This may itself be a bug.)
After changing from u_intNN_t to uintNN_t, a number of headers now
need to include stdint.h to pick up those types. It might be more
hygenic, namespace-wise, to use __uintNN_t instead, but none of these
headers are bound by ISO or POSIX to do so, and it's unlikely that
anyone using them will be bothered. (The two files that were using
__-prefixed versions of the u_types, sysdeps/mach/hurd/net/route.h and
sysdeps/unix/sysv/linux/net/route.h, both already also contained uses of
the unprefixed versions.)
Some of these files directly included features.h and/or sys/cdefs.h,
which I removed, as the style generally seems to be to let sys/types.h
do that for us. (This does not change the set of definitions exposed
by any header; sys/types.h unconditionally includes both features.h
and sys/cdefs.h.)
One file included asm/types.h unnecessarily.
* bits/in.h, gmon/sys/gmon.h, inet/netinet/igmp.h
* inet/protocols/routed.h, inet/protocols/talkd.h
* inet/protocols/timed.h, io/fts.h, nptl_db/thread_db.h
* resolv/arpa/nameser.h, resolv/resolv.h, sunrpc/rpc/rpc_des.h
* sysdeps/generic/netinet/if_ether.h
* sysdeps/generic/netinet/in_systm.h
* sysdeps/generic/netinet/ip.h, sysdeps/generic/netinet/tcp.h
* sysdeps/gnu/netinet/ip_icmp.h, sysdeps/gnu/netinet/tcp.h
* sysdeps/gnu/netinet/udp.h, sysdeps/mach/hurd/net/ethernet.h
* sysdeps/mach/hurd/net/if_arp.h
* sysdeps/mach/hurd/net/if_ppp.h
* sysdeps/mach/hurd/net/route.h, sysdeps/mach/sys/reboot.h
* sysdeps/unix/sysv/linux/bits/in.h
* sysdeps/unix/sysv/linux/net/ethernet.h
* sysdeps/unix/sysv/linux/net/if_arp.h
* sysdeps/unix/sysv/linux/net/if_ppp.h
* sysdeps/unix/sysv/linux/net/if_shaper.h
* sysdeps/unix/sysv/linux/net/route.h
* sysdeps/unix/sysv/linux/netinet/if_ether.h
* sysdeps/unix/sysv/linux/netinet/if_fddi.h
* sysdeps/unix/sysv/linux/netinet/if_tr.h
* sysdeps/unix/sysv/linux/netipx/ipx.h
* sysdeps/unix/sysv/linux/sys/acct.h
* include/arpa/nameser.h, include/resolv.h:
Change all uses of u_char to unsigned char,
u_short and ushort to unsigned short, u_int and uint to unsigned int,
u_long and ulong to unsigned long, u_int8_t to uint8_t,
u_int16_t to uint16_t, u_int32_t to uint32_t, quad_t to int64_t,
and u_int64_t and u_quad_t to uint64_t.
* mach/sys/reboot.h: Remove two casts of integer literals
to the types they already have.
* bits/in.h: Correct error in description of IP_MULTICAST_LOOP.
* sysdeps/unix/sysv/linux/bits/in.h: Likewise.
* sysdeps/unix/sysv/linux/netinet/if_ether.h: Change a comment
from referring to 'unsigned char' to 'uint8_t' for consistency with
the macro definition below.
* gmon/sys/gmon.h, inet/netinet/igmp.h, inet/protocols/talkd.h
* io/fts.h, resolv/arpa/nameser.h, resolv/resolv.h
* sunrpc/rpc/rpc_des.h, sysdeps/generic/netinet/ip.h
* sysdeps/gnu/netinet/tcp.h, sysdeps/gnu/netinet/udp.h
* sysdeps/mach/hurd/net/if_ppp.h, sysdeps/unix/sysv/linux/net/if_ppp.h
* sysdeps/unix/sysv/linux/sys/acct.h
* include/arpa/nameser.h, include/resolv.h:
Fix indentation disrupted by mechanical edits.
* inet/protocols/talkd.h, resolv/arpa/nameser.h
* sysdeps/generic/netinet/in_systm.h
* sysdeps/gnu/netinet/ip_icmp.h, sysdeps/gnu/netinet/tcp.h
* sysdeps/gnu/netinet/udp.h
* sysdeps/unix/sysv/linux/net/ethernet.h
* sysdeps/unix/sysv/linux/net/if_arp.h
* sysdeps/unix/sysv/linux/net/if_ppp.h
* sysdeps/unix/sysv/linux/net/if_shaper.h
* sysdeps/unix/sysv/linux/netinet/if_fddi.h
* sysdeps/unix/sysv/linux/netinet/if_tr.h
* sysdeps/unix/sysv/linux/netipx/ipx.h
* sysdeps/unix/sysv/linux/sys/acct.h
Include stdint.h for uintNN_t definitions.
Don't include sys/cdefs.h, features.h, or asm/types.h directly.
Some headers did not include all of their prerequisite headers.
* rpcsvc/nislib.h: Include rpcsvc/nis.h.
* sysdeps/unix/sysv/linux/netrose/rose.h:
Include sys/socket.h and netax25/ax25.h.
<endian.h> only defines BYTE_ORDER, BIG_ENDIAN, LITTLE_ENDIAN,
etc. under __USE_MISC; glibc's headers should use __BYTE_ORDER,
__BIG_ENDIAN, __LITTLE_ENDIAN, etc. instead.
* inet/netinet/icmp6.h, inet/netinet/ip6.h
* resolv/arpa/nameser_compat.h:
Use __BYTE_ORDER etc. instead of BYTE_ORDER etc.
sys/types.h only conditionally defines caddr_t and clockid_t.
* sysdeps/unix/sysv/linux/sys/quota.h:
Use __caddr_t instead of caddr_t.
* sysdeps/unix/sysv/linux/sys/timerfd.h:
Use __clockid_t instead of clockid_t.
Remove a #warning that was the sole actual problem with using sys/ipc.h
without _GNU_SOURCE/_XOPEN_SOURCE.
* sysvipc/sys/ipc.h: Remove unnecessary #warning.
_LIBC, __USE_XOPEN2K8, and __STDC_VERSION__ are not always defined.
It seems to me that _LIBC should not appear in installed headers, but
avoiding that for argp specifically would require more surgery than
feels appropriate for this patch set. It's possible that
"#ifdef _LIBC" would be sufficient, but I wanted to be conservative.
All three versions of bits/socket.h want to know whether __flexarr
will produce a real flexible array member -- specifically, one that
doesn't alter sizeof(the structure containing it). They were testing
for this with a complicated #if condition that did not agree with
sys/cdefs.h and that tripped -Wundef warnings under -std=c90.
I added a new macro to sys/cdefs.h, __glibc_c99_flexarr_available,
which reveals exactly what these headers want to know. I also took
the opportunity to flatten the rather messy conditional nest defining
__flexarr.
* argp/argp.h: Check whether _LIBC is defined before expanding it.
* posix/glob.h: Check whether __USE_XOPEN2K8 is defined instead
of expanding it.
* misc/sys/cdefs.h: Tidy up conditional nest defining __flexarr.
Define __glibc_c99_flexarr_available to 1 when the compiler
supports C99-compatible flexible array members, 0 otherwise.
* sysdeps/unix/sysv/linux/bits/socket.h
* sysdeps/mach/hurd/bits/socket.h
* bits/socket.h: Use __glibc_c99_flexarr_available in
definitions of struct cmsghdr and CMSG_DATA.
This is the hurd-specific follow-up for
29d794863c : hurdmalloc also needs the
same fix
* hurd/hurdmalloc.c (malloc_fork_prepare): Rename to
_hurd_malloc_fork_prepare.
(malloc_fork_parent): Rename to _hurd_malloc_fork_parent.
(malloc_fork_child): Rename to _hurd_malloc_fork_child.
(_hurd_fork_prepare_hook): Drop malloc_fork_prepare.
(_hurd_fork_parent_hook): Drop malloc_fork_parent.
(_hurd_fork_child_hook): Drop malloc_fork_child.
* hurd/hurdmalloc.h (_hurd_malloc_fork_prepare,
_hurd_malloc_fork_parent, _hurd_malloc_fork_child): Add declarations.
* sysdeps/mach/hurd/fork.c (__fork): Call __malloc_fork_lock_parent
after locking locks (notably hurd_dtable_lock). Call
_hurd_malloc_fork_prepare after that. Call _hurd_malloc_fork_parent
before __malloc_fork_unlock_parent and _hurd_malloc_fork_child before
__malloc_fork_unlock_child.
Existing interposed mallocs do not define the glibc-internal
fork callbacks (and they should not), so statically interposed
mallocs lead to link failures because the strong reference from
fork pulls in glibc's malloc, resulting in multiple definitions
of malloc-related symbols.
This avoids aliasing issues with GCC 6 in -fno-strict-aliasing
mode. (With implicit padding, not all data is copied.)
This change makes it explicit that struct sockaddr_storage is
only 126 bytes large on m68k (unlike elsewhere, where we end up
with the requested 128 bytes). The new test case makes sure that
this does not happen on other architectures.
Previously, a thread M invoking fork would acquire locks in this order:
(M1) malloc arena locks (in the registered fork handler)
(M2) libio list lock
A thread F invoking flush (NULL) would acquire locks in this order:
(F1) libio list lock
(F2) individual _IO_FILE locks
A thread G running getdelim would use this order:
(G1) _IO_FILE lock
(G2) malloc arena lock
After executing (M1), (F1), (G1), none of the threads can make progress.
This commit changes the fork lock order to:
(M'1) libio list lock
(M'2) malloc arena locks
It explicitly encodes the lock order in the implementations of fork,
and does not rely on the registration order, thus avoiding the deadlock.
The overloading approach in the W* macros was incompatible with
integer expressions of a type different from int. Applications
using union wait and these macros will have to migrate to the
POSIX-specified int status type.
* sysdeps/generic/dl-fcntl.h: New file, adds attribute_hidden to __open
and __fcntl.
* sysdeps/mach/hurd/dl-fcntl.h: New file, adds attribute_hidden to
__fcntl only.
* include/fcntl.h [IS_IN (rtld)]: Include <dl-fcntl.h> instead of
adding attribute_hidden to __open and __fcntl.
Generating errnos.d does not actually need libc-modules.h.
* sysdeps/mach/hurd/Makefile ($(common-objpfx)errnos.d): Strip
"-include $(common-objpfx)libc-modules.h" from CPPFLAGS, and do not
depend on libc-modules.h,
Since internal unistd functions are only used internally in ld.so and
libc.so, they can be made hidden. __close, __getcwd, __getpid,
__libc_read and __libc_write can't be hidden in ld.so on Hurd since they
will be preempted by the ones in libc.so after bootstrap.
[BZ #19122]
* include/unistd.h [IS_IN (rtld)]: Include <dl-unistd.h>.
* sysdeps/generic/dl-unistd.h: New file.
* sysdeps/mach/hurd/dl-unistd.h: Likewise.
Since ld.so internal mmap functions are only used internally in ld.so,
they can be made hidden. Don't hide __mmap on Hurd, since __mmap in
ld.so will be preempted by the one in libc.so after bootstrap.
[BZ #19122]
* include/sys/mman.h [IS_IN (rtld)]: Include <dl-mman.h>.
* sysdeps/generic/dl-mman.h: New file.
* sysdeps/mach/hurd/dl-mman.h: Likewise.
Since x86-64 and x32 use the same set of sched_XXX system call interface:
[hjl@gnu-6 linux-stable]$ grep sched_
arch/x86/entry/syscalls/syscall_64.tbl
24 common sched_yield sys_sched_yield
142 common sched_setparam sys_sched_setparam
143 common sched_getparam sys_sched_getparam
144 common sched_setscheduler sys_sched_setscheduler
145 common sched_getscheduler sys_sched_getscheduler
146 common sched_get_priority_max sys_sched_get_priority_max
147 common sched_get_priority_min sys_sched_get_priority_min
148 common sched_rr_get_interval sys_sched_rr_get_interval
203 common sched_setaffinity sys_sched_setaffinity
204 common sched_getaffinity sys_sched_getaffinity
314 common sched_setattr sys_sched_setattr
315 common sched_getattr sys_sched_getattr
[hjl@gnu-6 linux-stable]$
__cpu_mask should be unsigned long long, instead of unsigned long, for
x32. This patch adds __CPU_MASK_TYPE so that each architecture can
define the proper type for __cpu_mask.
[BZ #19313]
* bits/typesizes.h (__CPU_MASK_TYPE): New.
* sysdeps/mach/hurd/bits/typesizes.h (__CPU_MASK_TYPE): Likewise.
* sysdeps/nacl/bits/typesizes.h (__CPU_MASK_TYPE): Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/typesizes.h (__CPU_MASK_TYPE):
Likewise.
* sysdeps/unix/sysv/linux/generic/bits/typesizes.h (__CPU_MASK_TYPE):
Likewise.
* sysdeps/unix/sysv/linux/s390/bits/typesizes.h (__CPU_MASK_TYPE):
Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/typesizes.h (__CPU_MASK_TYPE):
Likewise.
* sysdeps/unix/sysv/linux/x86/bits/typesizes.h (__CPU_MASK_TYPE):
* sysdeps/unix/sysv/linux/bits/sched.h (__cpu_mask): Replace
unsigned long int with __CPU_MASK_TYPE.
The RPC interface used by mmap uses the unsigned vm_offset_t, not the
signed off_t, so 32bit bigger than 2GiB values are fine actually.
* sysdeps/mach/hurd/mmap64.c: New file.
* elf/dl-load.c (_dl_map_object_from_fd): Add additional parameter
for original name of the DSO. Add it to the name list of the DSO
if it is actually given.
(_dl_map_object): Keep track of whether an audit module rewrote
the file name. If yes, pass the original name to
_dl_map_object_from_fd in a new parameter, otherwise NULL. When
debugging is enabled, log the change of the file name.
* sysdeps/mach/hur/dl-sysdep.c: Adjust commented-out call to
_dl_map_object_from_fd.
* elf/Makefile: Build and run tst-audit11 and tst-audit12.
* elf/tst-audit11.c: New file
* elf/tst-auditmod11.c: New file.
* elf/tst-audit11mod1.c: New file.
* elf/tst-audit11mod2.c: New file.
* elf/tst-audit11mod2.map: New file.
* elf/tst-audit12.c: New file
* elf/tst-auditmod12.c: New file.
* elf/tst-audit12mod1.c: New file.
* elf/tst-audit12mod2.c: New file.
* elf/tst-audit12mod2.map: New file.
* elf/tst-audit12mod3.c: New file.
This way we do not
need to call the kernel just to get the port. Furthermore, we no
longer increase the reference count on every invocation of
`mach_host_self'.
* mach/mach/mach_traps.h (__mach_host_self, mach_host_self):
Protect declarations against the macro expansion.
* mach/mach_init.c (__mach_host_self_): New variable.
(mach_init): Initialize `__mach_host_self_'.
* mach/mach_init.h (__mach_host_self_): New declaration.
(__mach_host_self, mach_host_self): New macros.
* sysdeps/mach/hurd/dl-sysdep.c (_dl_sysdep_start_cleanup):
Release reference.
when initial make call has subdir= explicitly set.
* sysdeps/mach/Makefile ($(patsubst
mach%,m\%h%,$(mach-before-compile))): Force subdir to mach when
calling $(MAKE).
* sysdeps/mach/hurd/Makefile ($(patsubst %,$(hurd-objpfx)hurd/%.%,auth
io fs process)): Force subdir to hurd when calling $(MAKE).
($(common-objpfx)hurd/../mach/RPC_task_get_sampled_pcs.c): Force
subdir to mach when calling $(MAKE).
It was noted in
<https://sourceware.org/ml/libc-alpha/2012-09/msg00305.html> that the
bits/*.h naming scheme should only be used for installed headers.
This patch renames bits/libc-tsd.h to plain libc-tsd.h to follow that
convention.
Tested for x86_64 (testing, and that installed stripped shared
libraries are unchanged by the patch).
[BZ #14912]
* bits/libc-tsd.h: Move to ...
* sysdeps/generic/libc-tsd.h: ...here.
(_GENERIC_BITS_LIBC_TSD_H): Rename macro to _GENERIC_LIBC_TSD_H.
* sysdeps/mach/hurd/bits/libc-tsd.h: Move to ...
* sysdeps/mach/hurd/libc-tsd.h: ...here.
(_BITS_LIBC_TSD_H): Rename macro to _LIBC_TSD_H.
* include/ctype.h: Include <libc-tsd.h> instead of
<bits/libc-tsd.h>.
* include/rpc/rpc.h: Likewise.
* locale/localeinfo.h: Likewise.
* sunrpc/rpc_thread.c: Likewise.
* sysdeps/mach/hurd/malloc-machine.h: Likewise.
* sysdeps/nptl/malloc-machine.h: Likewise.
* sysdeps/mach/hurd/mlock.c (mlock): When __get_privileged_ports
returns an error, also try to use host port from __mach_host_self for
the __vm_wire call.
* sysdeps/mach/hurd/munlock.c (munlock): Likewise.
nice (XPG3) calls getpriority and setpriority (in XPG4 but not XPG3,
i.e. UX-shaded in XPG4). This patch fixes this by making those
functions into weak aliases of __* functions and calling the __*
versions as needed.
Tested for x86_64 and x86 (testsuite, and that disassembly of
installed shared libraries is unchanged by this patch).
This completes cleaning up the unsorted linknamespace test XFAILs.
[BZ #18553]
* resource/getpriority.c (getpriority): Rename to __getpriority
and define as weak alias of __getpriority.
* resource/setpriority.c (setpriority): Rename to __setpriority
and define as weak alias of __setpriority.
* sysdeps/mach/hurd/getpriority.c (getpriority): Rename to
__getpriority and define as weak alias of __getpriority.
* sysdeps/mach/hurd/setpriority.c (setpriority): Rename to
__setpriority and define as weak alias of __setpriority.
* sysdeps/unix/syscalls.list (getpriority): Use __getpriority as
strong name.
(setpriority): Use __setpriority as strong name.
* sysdeps/unix/sysv/linux/getpriority.c (getpriority): Rename to
__getpriority and define as weak alias of __getpriority.
* include/sys/resource.h (__getpriority): Declare. Use
libc_hidden_proto.
(__setpriority): Likewise.
(getpriority): Don't use libc_hidden_proto.
(setpriority): Likewise.
* sysdeps/posix/nice.c (nice): Call __getpriority instead of
getpriority. Call __setpriority instead of setpriority.
* conform/Makefile (test-xfail-XPG3/unistd.h/linknamespace):
Remove variable.
mq_notify (in the 1996 edition of POSIX) brings in references to recv
and socket (not in POSIX until the 2001 edition). This patch fixes
this by using __recv and __socket, exporting them from libc at version
GLIBC_PRIVATE.
Tested for x86_64 and x86 (testsuite and comparison of installed
stripped shared libraries; PLT / dynamic symbol table changes render
the comparison not particularly useful for libc).
[BZ #18546]
* socket/recv.c (__recv): Use libc_hidden_def.
* socket/socket.c (__socket): Likewise.
* sysdeps/mach/hurd/recv.c (__recv): Likewise.
* sysdeps/mach/hurd/socket.c (__socket): Likewise.
* sysdeps/unix/sysv/linux/generic/recv.c (__recv): Likewise.
* sysdeps/unix/sysv/linux/recv.c (__recv): Use libc_hidden_weak.
* sysdeps/unix/sysv/linux/socket.c (__socket): Use
libc_hidden_def.
* sysdeps/unix/sysv/linux/x86_64/recv.c (__recv): Use
libc_hidden_weak.
* include/sys/socket.h (__socket): Do not use attribute_hidden.
Use libc_hidden_proto.
(__recv): Likewise.
* socket/Versions (libc): Export __recv and __socket at version
GLIBC_PRIVATE.
* sysdeps/unix/sysv/linux/mq_notify.c (helper_thread): Call __recv
instead of recv.
(init_mq_netlink): Call __socket instead of socket.
* conform/Makefile (test-xfail-POSIX/mqueue.h/linknamespace):
Remove variable.
Various functions in XPG4 bring in references to getlogin_r, which is
not in XPG4; this is also a bug for some older POSIX versions which
aren't yet covered by the linknamespace tests. This patch fixes this
by making getlogin_r into a weak alias for __getlogin_r and using
__getlogin_r as needed.
Tested for x86_64 and x86 (testsuite, and that disassembly of
installed stripped shared libraries is unchanged by the patch).
[BZ #18527]
* login/getlogin_r.c (getlogin_r): Rename to __getlogin_r and
define as weak alias of __getlogin_r. Use libc_hidden_weak.
* sysdeps/mach/hurd/getlogin_r.c (getlogin_r): Likewise.
* sysdeps/unix/getlogin_r.c (getlogin_r): Likewise.
* sysdeps/unix/sysv/linux/getlogin_r.c (getlogin_r): Likewise.
* include/unistd.h (__getlogin_r): Declare. Use
libc_hidden_proto.
* posix/glob.c (glob): Call __getlogin_r instead of getlogin_r.
* conform/Makefile (test-xfail-XPG3/glob.h/linknamespace): Remove
variable.
(test-xfail-XPG3/wordexp.h/linknamespace): Likewise.
(test-xfail-XPG4/glob.h/linknamespace): Likewise.
(test-xfail-XPG4/wordexp.h/linknamespace): Likewise.
* sysdeps/mach/hurd/Makefile ($(common-objpfx)errnos.d): Depend on
libc-modules.h
* sysdeps/mach/hurd/i386/trampoline.c (_hurd_setup_sighandler): Remove
unused declaration of _hurd_intr_rpc_msg_in_trap.
* mach/mach_init.c (__mach_init): Test whether HAVE_HOST_PAGE_SIZE is
defined instead of whether it is non-zero.
* sysdeps/mach/hurd/i386/intr-msg.h (INTR_MSG_TRAP): Use "+m"
input constraint instead of both input and output constraint. Use ecx
clobber instead of %ecx.
* sysdeps/mach/hurd/malloc-machine.h (mutex_init, mutex_lock,
mutex_unlock): Use a statement expression instead of an expression list.
* sysdeps/mach/hurd/setitimer.c (_hurd_itimer_thread_stack_size): Set
type to vm_size_t instead of vm_address_t.
* sysdeps/mach/hurd/fork.c (__fork): Test whether STACK_GROWTH_UP is
defined instead of whether it is non-zero.
* hurd/hurd/ioctl.h (_hurd_locked_install_cttyid): New declaration.
* sysdeps/mach/hurd/setsid.c: Include <hurd/ioctl.h>.
* sysdeps/mach/hurd/mmap.c (__mmap): Use 0 instead of NULL for
comparisons with mapaddr.
* nscd/nscd-client.h: Include <time.h>.
* sysdeps/mach/hurd/dl-sysdep.c (fmh): Pass vm_offset_t dummy
9th parameter to __vm_region instead of int.
Both open and openat load their last argument 'mode' lazily, using
va_arg() only if O_CREAT is found in oflag. This is wrong, mode is also
necessary if O_TMPFILE is in oflag.
By chance on x86_64, the problem wasn't evident when using O_TMPFILE
with open, as the 3rd argument of open, even when not loaded with
va_arg, is left untouched in RDX, where the syscall expects it.
However, openat was not so lucky, and O_TMPFILE couldn't be used: mode
is the 4th argument, in RCX, but the syscall expects its 4th argument in
a different register than the glibc wrapper, in R10.
Introduce a macro __OPEN_NEEDS_MODE (oflag) to test if either O_CREAT or
O_TMPFILE is set in oflag.
Tested on Linux x86_64.
[BZ #17523]
* io/fcntl.h (__OPEN_NEEDS_MODE): New macro.
* io/bits/fcntl2.h (open): Use it.
(openat): Likewise.
* io/open.c (__libc_open): Likewise.
* io/open64.c (__libc_open64): Likewise.
* io/open64_2.c (__open64_2): Likewise.
* io/open_2.c (__open_2): Likewise.
* io/openat.c (__openat): Likewise.
* io/openat64.c (__openat64): Likewise.
* io/openat64_2.c (__openat64_2): Likewise.
* io/openat_2.c (__openat_2): Likewise.
* sysdeps/mach/hurd/open.c (__libc_open): Likewise.
* sysdeps/mach/hurd/openat.c (__openat): Likewise.
* sysdeps/posix/open64.c (__libc_open64): Likewise.
* sysdeps/unix/sysv/linux/dl-openat64.c (openat64): Likewise.
* sysdeps/unix/sysv/linux/generic/open.c (__libc_open): Likewise.
(__open_nocancel): Likewise.
* sysdeps/unix/sysv/linux/generic/open64.c (__libc_open64): Likewise.
* sysdeps/unix/sysv/linux/open64.c (__libc_open64): Likewise.
* sysdeps/unix/sysv/linux/openat.c (__OPENAT): Likewise.
Resolver code, brought in by pthreads (at least), uses if_* interfaces
that weren't in POSIX before 2001, resulting in linknamespace
failures. This patch changes those interfaces to be weak aliases of
__if_* and makes the resolver use __if_* directly.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by this patch).
[BZ #17717]
* inet/if_index.c (if_nametoindex): Rename to __if_nametoindex and
define as weak alias of __if_nametoindex. Use libc_hidden_weak.
(if_indextoname): Rename to __if_indextoname and define as weak
alias of __if_indextoname. Use libc_hidden_weak.
(if_freenameindex): Rename to __if_freenameindex and define as
weak alias of __if_freenameindex.
(if_nameindex): Rename to __if_nameindex and define as weak alias
of __if_nameindex.
* sysdeps/mach/hurd/if_index.c (if_nametoindex): Rename to
__if_nametoindex and define as weak alias of __if_nametoindex.
Use libc_hidden_weak.
(if_freenameindex): Rename to __if_freenameindex and define as
weak alias of __if_freenameindex.
(if_nameindex): Rename to __if_nameindex and define as weak alias
of __if_nameindex.
(if_indextoname): Rename to __if_indextoname and define as weak
alias of __if_indextoname. Use libc_hidden_weak.
* sysdeps/unix/sysv/linux/if_index.c (if_nametoindex): Rename to
__if_nametoindex and define as weak alias of __if_nametoindex.
Use libc_hidden_weak.
(if_freenameindex): Rename to __if_freenameindex and define as
weak alias of __if_freenameindex. Use libc_hidden_weak.
(if_nameindex_netlink): Use __if_freenameindex instead of
if_freenameindex.
(if_nameindex): Rename to __if_nameindex and define as weak alias
of __if_nameindex. Use libc_hidden_weak.
(if_indextoname): Rename to __if_indextoname and define as weak
alias of __if_indextoname. Use libc_hidden_weak.
* include/net/if.h [!_ISOMAC] (__if_nametoindex): Declare and use
libc_hidden_proto.
[!_ISOMAC] (__if_freenameindex): Likewise.
* resolv/res_init.c (__res_vinit): Use __if_nametoindex instead of
if_nametoindex.
* conform/Makefile (test-xfail-XPG4/grp.h/linknamespace): Remove
variable.
(test-xfail-XPG4/pwd.h/linknamespace): Likewise.
(test-xfail-UNIX98/aio.h/linknamespace): Likewise.
(test-xfail-UNIX98/grp.h/linknamespace): Likewise.
(test-xfail-UNIX98/pthread.h/linknamespace): Likewise.
(test-xfail-UNIX98/pwd.h/linknamespace): Likewise.
(test-xfail-UNIX98/sched.h/linknamespace): Likewise.
(test-xfail-UNIX98/time.h/linknamespace): Likewise.
Some pthreads functions use getrlimit and gettimeofday, but these
functions are XSI, not base POSIX; this is a namespace issue for
dynamic linking as well as static linking. This patch makes them use
__getrlimit and __gettimeofday instead - the former needed to be newly
exported from libc.so at GLIBC_PRIVATE (and so now needs
libc_hidden_proto / libc_hidden_def), the latter was already exported.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by the patch).
[BZ #17682]
* resource/Versions (libc): Add __getrlimit at GLIBC_PRIVATE.
* resource/getrlimit.c (__getrlimit): Use libc_hidden_def.
* sysdeps/mach/hurd/getrlimit.c (__getrlimit): Likewise.
* include/sys/resource.h (__getrlimit): Use libc_hidden_proto.
* nptl/nptl-init.c (__pthread_initialize_minimal_internal): Use
__getrlimit instead of getrlimit.
* nptl/pthread_cond_timedwait.c (__pthread_cond_timedwait): Use
__gettimeofday instead of gettimeofday.
* nptl/pthread_rwlock_timedrdlock.c (pthread_rwlock_timedrdlock):
Likewise.
* nptl/pthread_rwlock_timedwrlock.c (pthread_rwlock_timedwrlock):
Likewise.
* sysdeps/pthread/aio_misc.c (handle_fildes_io): Likewise.
* conform/Makefile (test-xfail-POSIX2008/aio.h/linknamespace):
Remove variable.
(test-xfail-POSIX2008/pthread.h/linknamespace): Likewise.
(test-xfail-POSIX2008/time.h/linknamespace): Likewise.
dlopening libraries from a static program would dlopen libc.so,
which thus needs its own initialization, done in posixland_init,
which was missing initializing RPCs so far.
ChangeLog:
2014-11-23 Samuel Thibault <samuel.thibault@ens-lyon.org>
* sysdeps/mach/hurd/i386/init-first.c (posixland_init): Call
__mach_init in dlopened libc.
__getcwd is called from dcigettext.o (brought in by various ISO C
functionality), but calls rewinddir, which is not an ISO C function.
This patch makes __getcwd call __rewinddir instead and makes rewinddir
a weak alias for __rewinddir.
Since getcwd.c is shared with gnulib (albeit not merged in either
direction for a long time, and omitted from gnulib's
config/srclist.txt list of shared files) I put in a #ifndef _LIBC
define of __rewinddir to rewinddir, although a future merged version
of getcwd could end up looking significantly different.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by this patch).
[BZ #17584]
* dirent/rewinddir.c (rewinddir): Rename to __rewinddir and define
as weak alias of __rewinddir. Don't use libc_hidden_def.
(__rewinddir): Use libc_hidden_def.
* sysdeps/mach/hurd/rewinddir.c: Rename to __rewinddir and define
as weak alias of __rewinddir. Don't use libc_hidden_def.
(__rewinddir): Use libc_hidden_def.
* sysdeps/posix/rewinddir.c: Rename to __rewinddir and define as
weak alias of __rewinddir. Don't use libc_hidden_def.
(__rewinddir): Use libc_hidden_def.
* include/dirent.h (rewinddir): Don't use libc_hidden_proto.
(__rewinddir): Use libc_hidden_proto.
* sysdeps/posix/getcwd.c [!_LIBC] (__rewinddir): Define to
rewinddir.
(__getcwd): Use __rewinddir instead of rewinddir.
Continuing the removal of the obsolete INTDEF / INTVARDEF / INTUSE
mechanism, this patch replaces its use for __libc_enable_secure with
the use of rtld_hidden_data_def and rtld_hidden_proto.
Tested for x86_64 that installed stripped shared libraries are
unchanged by the patch.
[BZ #14132]
* elf/dl-sysdep.c (__libc_enable_secure): Use rtld_hidden_data_def
instead of INTVARDEF.
(_dl_sysdep_start): Do not use INTUSE with __libc_enable_secure.
* sysdeps/mach/hurd/dl-sysdep.c (__libc_enable_secure): Use
rtld_hidden_data_def instead of INTVARDEF.
(_dl_sysdep_start): Do not use INTUSE with __libc_enable_secure.
* elf/dl-deps.c (expand_dst): Likewise.
* elf/dl-load.c (_dl_dst_count): Likewise.
(_dl_dst_substitute): Likewise.
(decompose_rpath): Likewise.
(_dl_init_paths): Likewise.
(open_path): Likewise.
(_dl_map_object): Likewise.
* elf/rtld.c (dl_main): Likewise.
(process_dl_audit): Likewise.
(process_envvars): Likewise.
* include/unistd.h [IS_IN_rtld] (__libc_enable_secure_internal):
Remove declaration.
(__libc_enable_secure): Use rtld_hidden_proto.
This patch removes the --enable-oldest-abi configure option, which has
long been bitrotten (as reported in bug 6652). The principle of
removing this option was agreed in the thread starting at
<https://sourceware.org/ml/libc-alpha/2013-07/msg00174.html>.
Tested for x86_64 and x86 that the installed shared libraries other
than libc.so are unchanged by this patch and that libc.so disassembly
and symbol versions are unchanged (debug info changes because of
changed line numbers in csu/version.c).
[BZ #6652]
* Makeconfig (soversions-default-setname): Remove variable.
($(common-objpfx)soversions.i): Don't pass default_setname to
soversions.awk.
* Makerules ($(common-objpfx)abi-versions.h): Don't pass
oldest_abi to abi-versions.awk.
* config.h.in (GLIBC_OLDEST_ABI): Remove macro undefine.
* config.make.in (oldest-abi): Remove variable.
* configure.ac (--enable-oldest-abi): Remove configure option.
* configure: Regenerated.
* csu/version.c (banner) [GLIBC_OLDEST_ABI]: Remove conditional
text.
* scripts/abi-versions.awk: Do not handle oldest_abi variable.
* scripts/soversions.awk: Do not handle default_setname variable.
* sysdeps/mach/hurd/configure.ac: Do not handle oldest_abi
variable.
* sysdeps/mach/hurd/configure: Regenerated.
* sysdeps/unix/sysv/linux/configure.ac: Do not handle oldest_abi
variable.
* sysdeps/unix/sysv/linux/configure: Regenerated.
This patch removes the first column (patterns matching configuration
names) from shlib-versions, leaving shlib-versions entry selection
based purely on sysdeps directories.
An implication of this removal is that the default for any non-Linux
ports using NPTL will be the same SONAMEs for NPTL libraries as for
Linux (as those defaults, previously limited to .*-.*-linux.*, are
left in nptl/shlib-versions and nptl_db/shlib-versions).
Special host_os handling in configure.ac that was purely for
shlib-versions is removed. (The host_os setting is still used for
libc-abis - see
<https://sourceware.org/ml/libc-alpha/2014-01/msg00375.html> regarding
that - but no entries there are affected by this change.)
Tested on x86_64 and x86 that the installed shared libraries are
unchanged by this patch.
* scripts/soversions.awk: Do not handle configuration names.
* Makeconfig ($(common-objpfx)soversions.i): Do not pass cpu,
vendor and os variables to soversions.awk.
* configure.ac: Do not modify gnu-* host_os.
* configure: Regenerated
* shlib-versions: Remove first column with configuration names.
* nptl/shlib-versions: Likewise.
* nptl_db/shlib-versions: Likewise.
* sysdeps/hppa/shlib-versions: Likewise.
* sysdeps/m68k/shlib-versions: Likewise.
* sysdeps/mach/hurd/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/aarch64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/alpha/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/arm/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/hppa/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/ia64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/microblaze/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/mips/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/sh/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/tile/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/shlib-versions: Likewise.
libidn/ChangeLog:
* shlib-versions: Remove first column with configuration names.
This patch moves OS-specific entries in the top-level shlib-versions
file to appropriate sysdeps directories. I left the entries in
nptl/shlib-versions and nptl_db/shlib-versions unchanged; I think it
can be for those doing non-Linux NPTL-using ports to figure out
whether those entries should actually be OS-independent or should move
to sysdeps.
Given these two patches, I think the only further change needed before
the first column of shlib-versions can be eliminated will be changing
sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions to use %ifdef
to distinguish BE and LE configurations, instead of relying on the
powerpc64-.*-linux.* and powerpc.*le-.*-linux.* patterns.
Tested on x86_64 that the installed shared libraries are unchanged by
this patch.
* shlib-versions: Remove OS-specific entries. Moved to files in
sysdeps.
* sysdeps/mach/hurd/shlib-versions: New file.
* sysdeps/unix/sysv/linux/shlib-versions: Likewise.
If e.g. a signal is being received while we are running fork(), the signal
thread may be having our SS lock when we make the space copy, and thus in the
child we can not take the SS lock any more.
* sysdeps/mach/hurd/fork.c (__fork): Lock SS->lock around __proc_dostop call.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
The PAGE_COPY_THRESHOLD macro is meant to be overridden by
architecture-specific pagecopy.h, but it is currently done only by
mach; all other architectures use the default. Check to see if the
macro is defined in addition to whether it is set to a non-zero value.
As discussed in
<https://sourceware.org/ml/libc-alpha/2012-04/msg00840.html> and
<https://sourceware.org/ml/libc-alpha/2012-04/msg00989.html>, it seems
appropriate to flatten sysdeps/unix/bsd/bsd4.4 into sysdeps/unix/bsd.
The bulk of the patch is just moving files. The only other changes
are: update paths in sysdeps/mach/hurd/Implies and
sysdeps/unix/sysv/linux/wait3.c; merge the two syscalls.list files,
with the removal of syscalls that were in
sysdeps/unix/bsd/syscalls.list but overridden in the bsd4.4 directory
by .c files there.
Tested x86_64. The installed shared libraries are identical before
and after the patch except for libc.so where the move of wait3.c
(included by sysdeps/unix/sysv/linux/wait3.c) affects debug info, but
the disassembly is unchanged.
* sysdeps/mach/hurd/Implies: Change unix/bsd/bsd4.4 to unix/bsd.
* sysdeps/unix/bsd/syscalls.list (chflags): Add entry from
sysdeps/unix/bsd/bsd4.4/syscalls.list.
(fchflags): Likewise.
(revoke): Likewise.
(setlogin): Likewise.
(sigaltstack): Likewise.
(wait4): Likewise.
(sigblock): Remove.
(sigsetmask): Likewise.
(wait3): Likewise.
(waitpid): Likewise.
* sysdeps/unix/bsd/bsd4.4/syscalls.list: Remove file.
* sysdeps/unix/sysv/linux/wait3.c: Update directory of included
file.
* sysdeps/unix/bsd/bsd4.4/Makefile: Move to ...
* sysdeps/unix/bsd/Makefile: ... here.
* sysdeps/unix/bsd/bsd4.4/Versions: Move to ...
* sysdeps/unix/bsd/Versions: ... here.
* sysdeps/unix/bsd/bsd4.4/bits/sockaddr.h: Move to ...
* sysdeps/unix/bsd/bits/sockaddr.h: ... here.
* sysdeps/unix/bsd/bsd4.4/cmsg_nxthdr.c: Move to ...
* sysdeps/unix/bsd/cmsg_nxthdr.c: ... here.
* sysdeps/unix/bsd/bsd4.4/sigblock.c: Move to ...
* sysdeps/unix/bsd/sigblock.c: ... here.
* sysdeps/unix/bsd/bsd4.4/sigsetmask.c: Move to ...
* sysdeps/unix/bsd/sigsetmask.c: ... here.
* sysdeps/unix/bsd/bsd4.4/sigvec.c: Move to ...
* sysdeps/unix/bsd/sigvec.c: ... here.
* sysdeps/unix/bsd/bsd4.4/tcdrain.c: Move to ...
* sysdeps/unix/bsd/tcdrain.c: ... here.
* sysdeps/unix/bsd/bsd4.4/tcgetattr.c: Move to ...
* sysdeps/unix/bsd/tcgetattr.c: ... here.
* sysdeps/unix/bsd/bsd4.4/tcsetattr.c: Move to ...
* sysdeps/unix/bsd/tcsetattr.c: ... here.
* sysdeps/unix/bsd/bsd4.4/wait.c: Move to ...
* sysdeps/unix/bsd/wait.c: ... here.
* sysdeps/unix/bsd/bsd4.4/wait3.c: Move to ...
* sysdeps/unix/bsd/wait3.c: ... here.
* sysdeps/unix/bsd/bsd4.4/waitpid.c: Move to ...
* sysdeps/unix/bsd/waitpid.c: ... here.
Autoconf has been deprecating configure.in for quite a long time.
Rename all our configure.in and preconfigure.in files to .ac.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This define was removed from the rest of the tree eight years ago.
ChangeLog:
2013-09-24 Will Newton <will.newton@linaro.org>
* sysdeps/mach/hurd/i386/tls.h (TLS_INIT_TP_EXPENSIVE): Remove
macro.
ptsname_r on failure returns the value that is also set as errno; furthermore,
add more checks to it:
- set errno and return it on __term_get_peername failure
- set errno to ERANGE other than returning it
- change the type of PEERNAME to string_t, and check its length with __strnlen
In ptsname:
- change the type of PEERNAME to string_t
- do not set errno manually, since ptsname_r has set it already
- make LOGIN non-static, as it would make getlogin_r no more reentrant; change its type to string_t
- fail with ERANGE if NAME has not enough space for the actual login string
- copy with memcpy only the chars of the string
Create a new create_address_port subroutine to isolate the address port creation
(for both local and remove sockets), and use it inside HURD_DPORT_USE.
Also intialize APORT to MACH_PORT_NULL and make sure to always deallocate it,
when not null.
The getcwd syscall (so far?) can only handle path up to one page
in size. There is no limit about directory hierarchy depth, though,
and the POSIX getcwd is supposed to handle this. In that case fall
back to the generic getcwd.
Additionally, optimize the generic getcwd to use openat when possible
to change the asymptotic performance from O(N^2) to O(n).
* wcsmbs/wchar.h: mbsnrtowcs, open_wmemstream, wcpcpy, wcpncpy,
wcscasecmp, wcsdup, wcsncasecmp, wcsnlen, wcsnrtombs,
wcscasecmp_l, wcsncasecmp_l, wcscoll_l, and wcsxfrm_l.
* sysdeps/mach/hurd/bits/posix_opt.h: Reset value of macros from
200112L to 200809L.
* sysdeps/unix/sysv/linux/bits/posix_opt.h: Likewise.
* posix/getconf.c (vars): Add _SC_THREAD_ROBUST_PRIO_INHERIT and
_SC_THREAD_ROBUST_PRIO_PROTECT entries.
* bits/confname.h: Add _SC_THREAD_ROBUST_PRIO_INHERIT and
_SC_THREAD_ROBUST_PRIO_PROTECT.
* posix/unistd.h: fexecve is in POSIX 2008.
* time/time.h: strftime_l is in POSIX 2008.
* io/sys/stat.h: futimens is in POSIX 2008.
* string/strings.h: strcasecmp_l and strncasecmp_l are in POSIX 2008.
* string/string.h: stpcpy, stpncpy, strndup, strnlen, strsignal,
strcoll_l, strerror_l, and strxfrm_l are in POSIX 2008.
* stdlib/stdlib.h: mkdtemp is in POSIX 2008.
Add net/ethernet.h net/if_arp.h net/if_ether.h net/if_ppp.h
net/route.h.
* hurd/report-wait.c (describe_number): Use __stpcpy to prepend
flavor to description only when flavor is not NULL.
* hurd/hurdsig.c (signal_allowed): Unlock _hurd_dtable_lock
mutex after SIGIO/SIGURG lookup loop.
