The ifunc handling for strcspn is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strcspn variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strcspn variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strcspn.
* sysdeps/s390/multiarch/strcspn-c.c: Move to ...
* sysdeps/s390/strcspn-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strcspn-vx.S: Move to ...
* sysdeps/s390/strcspn-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strcspn.c: Move to ...
* sysdeps/s390/strcspn.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strcspn.h: New file.
The ifunc handling for strpbrk is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strpbrk variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strpbrk variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strpbrk.
* sysdeps/s390/multiarch/strpbrk-c.c: Move to ...
* sysdeps/s390/strpbrk-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strpbrk-vx.S: Move to ...
* sysdeps/s390/strpbrk-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strpbrk.c: Move to ...
* sysdeps/s390/strpbrk.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strpbrk.h: New file.
The ifunc handling for strspn is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strspn variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strspn variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strspn.
* sysdeps/s390/multiarch/strspn-c.c: Move to ...
* sysdeps/s390/strspn-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strspn-vx.S: Move to ...
* sysdeps/s390/strspn-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strspn.c: Move to ...
* sysdeps/s390/strspn.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strspn.h: New file.
The ifunc handling for strrchr is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strrchr variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strrchr variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strrchr.
* sysdeps/s390/multiarch/strrchr-c.c: Move to ...
* sysdeps/s390/strrchr-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strrchr-vx.S: Move to ...
* sysdeps/s390/strrchr-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strrchr.c: Move to ...
* sysdeps/s390/strrchr.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strrchr.h: New file.
The ifunc handling for strchrnul is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strchrnul variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strchrnul variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strchrnul.
* sysdeps/s390/multiarch/strchrnul-c.c: Move to ...
* sysdeps/s390/strchrnul-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strchrnul-vx.S: Move to ...
* sysdeps/s390/strchrnul-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strchrnul.c: Move to ...
* sysdeps/s390/strchrnul.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strchrnul.h: New file.
The ifunc handling for strchr is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strchr variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strchr variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strchr.
* sysdeps/s390/multiarch/strchr-c.c: Move to ...
* sysdeps/s390/strchr-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strchr-vx.S: Move to ...
* sysdeps/s390/strchr-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strchr.c: Move to ...
* sysdeps/s390/strchr.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strchr.h: New file.
The ifunc handling for strncmp is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strncmp variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strncmp variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strncmp.
* sysdeps/s390/multiarch/strncmp-c.c: Move to ...
* sysdeps/s390/strncmp-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strncmp-vx.S: Move to ...
* sysdeps/s390/strncmp-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strncmp.c: Move to ...
* sysdeps/s390/strncmp.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strncmp.h: New file.
The ifunc handling for strcmp is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
Note: The fallback s390-32/s390-64 ifunc variants with clst instruction
are now moved to the unified strcmp-z900.S file which can be used for
31/64bit. The s390-32/s390-64 files multiarch/strcmp.c and strcmp.S
are deleted.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strcmp variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strcmp variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strcmp.
* sysdeps/s390/multiarch/strcmp-vx.S: Move to ...
* sysdeps/s390/strcmp-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strcmp.c: Move to ...
* sysdeps/s390/strcmp.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strcmp.h: New file.
* sysdeps/s390/s390-64/strcmp.S: Move to ...
* sysdeps/s390/strcmp-z900.S: ... here and adjust to be usable
for 31/64bit and ifunc handling.
* sysdeps/s390/s390-32/multiarch/strcmp.c: Delete file.
* sysdeps/s390/s390-64/multiarch/strcmp.c: Likewise.
* sysdeps/s390/s390-32/strcmp.S: Likewise.
The ifunc handling for strncat is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strncat variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strncat variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strncat.
* sysdeps/s390/multiarch/strncat-c.c: Move to ...
* sysdeps/s390/strncat-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strncat-vx.S: Move to ...
* sysdeps/s390/strncat-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strncat.c: Move to ...
* sysdeps/s390/strncat.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strncat.h: New file.
The ifunc handling for strcat is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strcat variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strcat variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strcat.
* sysdeps/s390/multiarch/strcat-c.c: Move to ...
* sysdeps/s390/strcat-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strcat-vx.S: Move to ...
* sysdeps/s390/strcat-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strcat.c: Move to ...
* sysdeps/s390/strcat.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strcat.h: New file.
The ifunc handling for stpncpy is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove stpncpy variants.
* sysdeps/s390/Makefile (sysdep_routines): Add stpncpy variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for stpncpy.
* sysdeps/s390/multiarch/stpncpy-c.c: Move to ...
* sysdeps/s390/stpncpy-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/stpncpy-vx.S: Move to ...
* sysdeps/s390/stpncpy-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/stpncpy.c: Move to ...
* sysdeps/s390/stpncpy.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-stpncpy.h: New file.
The ifunc handling for strncpy is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
Note: The fallback s390-32/s390-64 ifunc variants are now moved to
the strncpy-z900.S files. The s390-32/s390-64 files multiarch/strncpy.c
and strncpy.S are deleted.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strncpy variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strncpy variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strncpy.
* sysdeps/s390/multiarch/strncpy-vx.S: Move to ...
* sysdeps/s390/strncpy-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strncpy.c: Move to ...
* sysdeps/s390/strncpy.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strncpy.h: New file.
* sysdeps/s390/s390-64/strncpy.S: Move to ...
* sysdeps/s390/s390-64/strncpy-z900.S: ... here
and adjust ifunc handling.
* sysdeps/s390/s390-32/strncpy.S: Move to ...
* sysdeps/s390/s390-32/strncpy-z900.S: ... here
and adjust ifunc handling.
* sysdeps/s390/s390-32/multiarch/strncpy.c: Delete file.
* sysdeps/s390/s390-64/multiarch/strncpy.c: Likewise.
The ifunc handling for stpcpy is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove stpcpy variants.
* sysdeps/s390/Makefile (sysdep_routines): Add stpcpy variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for stpcpy.
* sysdeps/s390/multiarch/stpcpy-c.c: Move to ...
* sysdeps/s390/stpcpy-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/stpcpy-vx.S: Move to ...
* sysdeps/s390/stpcpy-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/stpcpy.c: Move to ...
* sysdeps/s390/stpcpy.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-stpcpy.h: New file.
The ifunc handling for strcpy is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
Note: The fallback s390-32/s390-64 ifunc variants with mvst instruction
are now moved to the unified strcpy-z900.S file which can be used for
31/64bit. The s390-32/s390-64 files multiarch/strcpy.c and strcpy.S
are deleted.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strcpy variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strcpy variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strcpy.
* sysdeps/s390/multiarch/strcpy-vx.S: Move to ...
* sysdeps/s390/strcpy-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strcpy.c: Move to ...
* sysdeps/s390/strcpy.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strcpy.h: New file.
* sysdeps/s390/s390-64/strcpy.S: Move to ...
* sysdeps/s390/strcpy-z900.S: ... here and adjust to be usable
for 31/64bit and ifunc handling.
* sysdeps/s390/s390-32/multiarch/strcpy.c: Delete file.
* sysdeps/s390/s390-64/multiarch/strcpy.c: Likewise.
* sysdeps/s390/s390-32/strcpy.S: Likewise.
The ifunc handling for strnlen is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strnlen variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strnlen variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strnlen.
* sysdeps/s390/multiarch/strnlen-c.c: Move to ...
* sysdeps/s390/strnlen-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strnlen-vx.S: Move to ...
* sysdeps/s390/strnlen-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strnlen.c: Move to ...
* sysdeps/s390/strnlen.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strnlen.h: New file.
The ifunc handling for strlen is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strlen variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strlen variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strlen.
* sysdeps/s390/multiarch/strlen-c.c: Move to ...
* sysdeps/s390/strlen-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strlen-vx.S: Move to ...
* sysdeps/s390/strlen-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strlen.c: Move to ...
* sysdeps/s390/strlen.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strlen.h: New file.
The new vector variant of memmem is using the common code
implementation, but instead of calling the default
mem* functions, the vector variants are called.
ChangeLog:
* sysdeps/s390/Makefile (sysdep_routines): Add memmem variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add ifunc variants for memmem.
* sysdeps/s390/ifunc-memmem.h: New file.
* sysdeps/s390/memmem.c: Likewise.
* sysdeps/s390/memmem-c.c: Likewise.
* sysdeps/s390/memmem-vx.c: Likewise.
The new vector variant of strstr is using the common code
implementation, but instead of calling the default
str* / mem* functions, the vector variants are called.
ChangeLog:
* sysdeps/s390/Makefile (sysdep_routines): Add strstr variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add ifunc variants for strstr.
* sysdeps/s390/ifunc-strstr.h: New file.
* sysdeps/s390/strstr.c: Likewise.
* sysdeps/s390/strstr-c.c: Likewise.
* sysdeps/s390/strstr-vx.c: Likewise.
This patch introduces a z13 specific ifunc variant for memmove.
As the common code implementation, it checks if we can copy from
the beginning to the end - with z196 memcpy implementation - or
if we have to copy from the end to the beginning.
The latter case is done by using vector load/store instructions.
If vector instructions are not available, the common-code is
used as fallback. Therefore it is implemented in memmove-c with
a different name.
Furthermore the ifunc logic decides if we need the common-code
implementation at all. If vector instructions are supported
due to the minimum architecture level set we can skip the
common-code ifunc variant.
ChangeLog:
* sysdeps/s390/Makefile (sysdep_routines): Add memmove-c.
* sysdeps/s390/ifunc-memcpy.h (HAVE_MEMMOVE_IFUNC,
HAVE_MEMMOVE_IFUNC_AND_VX_SUPPORT, MEMMOVE_DEFAULT,
HAVE_MEMMOVE_C, MEMMOVE_C, HAVE_MEMMOVE_Z13, MEMMOVE_Z13):
New defines.
* sysdeps/s390/memcpy-z900.S: Add z13 memmove implementation.
* sysdeps/s390/memmove-c.c: New file.
* sysdeps/s390/memmove.c: Likewise.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add ifunc variants for memmove.
Add a configure check for z13 in the same way as done for z196.
ChangeLog:
* config.h.in (HAVE_S390_MIN_Z13_ZARCH_ASM_SUPPORT): New undefine.
* sysdeps/s390/configure.ac: Add check for z13 support.
* sysdeps/s390/configure: Regenerated.
The s390/s390x memcpy implementations are safe to be
used by memmove. Starting with this commit, memmove is
using memcpy for the forward cases on s390.
ChangeLog:
* sysdeps/s390/memcopy.h: New file.
Nowadays gcc is automatically replacing a call to bcopy
with a call to memmove. Thus only old binaries will call
the s390 specific bcopy implementation.
The s390 specific implementation is using an own
implementation for memcpy in the forward case and is
relying on memmove in the backward case.
After removing the s390 specific bcopy, the common code
bcopy is used. It just performs a tail call to memmove.
ChangeLog:
* sysdeps/s390/s390-32/bcopy.S: Remove.
* sysdeps/s390/s390-64/bcopy.S: Likewise.
This patch moves all ifunc variants for memcpy/mempcpy
to sysdeps/s390/memcpy-z900.S. The configure-check/preprocessor logic
in sysdeps/s390/ifunc-memcpy.h decides if ifunc is needed at all
and which ifunc variants should be available.
E.g. if the compiler/assembler already supports z196 by default,
the older ifunc variants are not included.
If we only need the newest ifunc variant,
then we can skip ifunc at all.
Therefore the ifunc-resolvers and __libc_ifunc_impl_list are adjusted
in order to handle only the available ifunc variants.
ChangeLog:
* sysdeps/s390/ifunc-memcpy.h: New File.
* sysdeps/s390/memcpy.S: Move to ...
* sysdeps/s390/memcpy-z900.S ... here.
Move implementations from memcpy-s390x.s to here.
* sysdeps/s390/multiarch/memcpy-s390x.S: Delete File.
* sysdeps/s390/multiarch/Makefile (sysdep_routines):
Remove memcpy/mempcpy variants.
* sysdeps/s390/Makefile (sysdep_routines):
Add memcpy/mempcpy variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Adjust ifunc variants for
memcpy and mempcpy.
* sysdeps/s390/multiarch/memcpy.c: Move ifunc resolver
to ...
* sysdeps/s390/memcpy.c: ... here.
Adjust ifunc variants for memcpy.
* sysdeps/s390/multiarch/mempcpy.c: Move to ...
* sysdeps/s390/mempcpy.c: ... here.
Adjust ifunc variants for mempcpy.
* sysdeps/s390/mempcpy.S: Delete file.
The implementation of memcpy/mempcpy for s390-32 (31bit)
and s390-64 (64bit) is nearly the same.
This patch unifies it for maintability reasons.
__mem[p]cpy_z10 and __mem[p]cpy_z196 differs between 31 and 64bit:
-31bit needs .machinemode "zarch_nohighgprs" and llgfr %r4,%r4
-lr vs lgr; lgr can be also used on 31bit as this ifunc variant
is only called if we are on a zarch machine.
__mem[p]cpy_default differs between 31 and 64bit:
-Some 31bit vs 64bit instructions (e.g. ltr vs ltgr.
Solved with 31/64 specific instruction macros).
-The address of mvc instruction is setup in different ways
(larl vs bras). Solved with #if defined __s390x__.
__memcpy_mvcle differs between 31 and 64bit:
-lr vs lgr; ahi vs aghi;
Solved with 31/64bit specific instruction macros.
Otherwise 31/64bit implementation has the same structure of the code.
ChangeLog:
* sysdeps/s390/s390-64/memcpy.S: Move to ...
* sysdeps/s390/memcpy.S: ... here.
Adjust to be usable for 31/64bit.
* sysdeps/s390/s390-32/memcpy.S: Delete File.
* sysdeps/s390/multiarch/Makefile (sysdep_routines): Add memcpy.
* sysdeps/s390/s390-32/multiarch/Makefile: Delete file.
* sysdeps/s390/s390-64/multiarch/Makefile: Likewise.
* sysdeps/s390/s390-64/multiarch/memcpy-s390x.S: Move to ...
* sysdeps/s390/multiarch/memcpy-s390x.S: ... here.
Adjust to be usable for 31/64bit.
* sysdeps/s390/s390-32/multiarch/memcpy-s390.S: Delete File.
* sysdeps/s390/s390-64/multiarch/memcpy.c: Move to ...
* sysdeps/s390/multiarch/memcpy.c: ... here.
* sysdeps/s390/s390-32/multiarch/memcpy.c: Delete File.
This patch moves all ifunc variants for memcmp
to sysdeps/s390/memcmp-z900.S. The configure-check/preprocessor logic
in sysdeps/s390/ifunc-memcmp.h decides if ifunc is needed at all
and which ifunc variants should be available.
E.g. if the compiler/assembler already supports z196 by default,
the older ifunc variants are not included.
If we only need the newest ifunc variant,
then we can skip ifunc at all.
Therefore the ifunc-resolvers and __libc_ifunc_impl_list are adjusted
in order to handle only the available ifunc variants.
ChangeLog:
* sysdeps/s390/ifunc-memcmp.h: New File.
* sysdeps/s390/memcmp.S: Move to ...
* sysdeps/s390/memcmp-z900.S ... here.
Move implementations from memcmp-s390x.s to here.
* sysdeps/s390/multiarch/memcmp-s390x.S: Delete File.
* sysdeps/s390/multiarch/Makefile (sysdep_routines):
Remove memcmp variants.
* sysdeps/s390/Makefile (sysdep_routines):
Add memcmp variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Adjust ifunc variants for
memcmp.
* sysdeps/s390/multiarch/memcmp.c: Move ifunc resolver
to ...
* sysdeps/s390/memcmp.c: ... here.
Adjust ifunc variants for memcmp.
The implementation of memcmp for s390-32 (31bit) and
s390-64 (64bit) is nearly the same.
This patch unifies it for maintability reasons.
__memcmp_z10 and __memcmp_z196 differs between 31 and 64bit:
-31bit needs .machinemode "zarch_nohighgprs" and llgfr %r4,%r4
-lr vs lgr and some other instructions:
But lgr and co can be also used on 31bit as this ifunc variant
is only called if we are on a zarch machine.
__memcmp_default differs between 31 and 64bit:
-Some 31bit vs 64bit instructions (e.g. ltr vs ltgr.
Solved with 31/64 specific instruction macros).
-The address of mvc instruction is setup in different ways
(larl vs bras). Solved with #if defined __s390x__.
Otherwise 31/64bit implementation has the same structure of the code.
ChangeLog:
* sysdeps/s390/s390-64/memcmp.S: Move to ...
* sysdeps/s390/memcmp.S: ... here.
Adjust to be usable for 31/64bit.
* sysdeps/s390/s390-32/memcmp.S: Delete File.
* sysdeps/s390/multiarch/Makefile (sysdep_routines): Add memcmp.
* sysdeps/s390/s390-32/multiarch/Makefile (sysdep_routines):
Remove memcmp.
* sysdeps/s390/s390-64/multiarch/Makefile: Likewise.
* sysdeps/s390/s390-64/multiarch/memcmp-s390x.S: Move to ...
* sysdeps/s390/multiarch/memcmp-s390x.S: ... here.
Adjust to be usable for 31/64bit.
* sysdeps/s390/s390-32/multiarch/memcmp-s390.S: Delete File.
* sysdeps/s390/s390-64/multiarch/memcmp.c: Move to ...
* sysdeps/s390/multiarch/memcmp.c: ... here.
* sysdeps/s390/s390-32/multiarch/memcmp.c: Delete File.
This patch moves all ifunc variants for memset
to sysdeps/s390/memset-z900.S. The configure-check/preprocessor logic
in sysdeps/s390/ifunc-memset.h decides if ifunc is needed at all
and which ifunc variants should be available.
E.g. if the compiler/assembler already supports z196 by default,
the older ifunc variants are not included.
If we only need the newest ifunc variant,
then we can skip ifunc at all.
Therefore the ifunc-resolvers and __libc_ifunc_impl_list are adjusted
in order to handle only the available ifunc variants.
ChangeLog:
* sysdeps/s390/ifunc-memset.h: New File.
* sysdeps/s390/memset.S: Move to ...
* sysdeps/s390/memset-z900.S ... here.
Move implementations from memset-s390x.s to here.
* sysdeps/s390/multiarch/memset-s390x.S: Delete File.
* sysdeps/s390/multiarch/Makefile (sysdep_routines):
Remove memset variants.
* sysdeps/s390/Makefile (sysdep_routines):
Add memset variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Adjust ifunc variants for
memset.
* sysdeps/s390/multiarch/memset.c: Move ifunc resolver
to ...
* sysdeps/s390/memset.c: ... here.
Adjust ifunc variants for memset.
The implementation of memset for s390-32 (31bit) and
s390-64 (64bit) is nearly the same.
This patch unifies it for maintability reasons.
__memset_z10 and __memset_z196 differs between 31 and 64bit:
-31bit needs .machinemode "zarch_nohighgprs" and llgfr %r4,%r4
-lr vs lgr and some other instructions:
But lgr and co can be also used on 31bit as this ifunc variant
is only called if we are on a zarch machine.
__memset_default differs between 31 and 64bit:
-Some 31bit vs 64bit instructions (e.g. ltr vs ltgr.
Solved with 31/64 specific instruction macros).
-The address of mvc instruction is setup in different ways
(larl vs bras). Solved with #if defined __s390x__.
Otherwise 31/64bit implementation has the same structure of the code.
ChangeLog:
* sysdeps/s390/s390-64/memset.S: Move to ...
* sysdeps/s390/memset.S: ... here.
Adjust to be usable for 31/64bit.
* sysdeps/s390/s390-32/memset.S: Delete File.
* sysdeps/s390/multiarch/Makefile (sysdep_routines): Add memset.
* sysdeps/s390/s390-32/multiarch/Makefile (sysdep_routines):
Remove memset.
* sysdeps/s390/s390-64/multiarch/Makefile: Likewise.
* sysdeps/s390/s390-64/multiarch/memset-s390x.S: Move to ...
* sysdeps/s390/multiarch/memset-s390x.S: ... here.
Adjust to be usable for 31/64bit.
* sysdeps/s390/s390-32/multiarch/memset-s390.S: Delete File.
* sysdeps/s390/s390-64/multiarch/memset.c: Move to ...
* sysdeps/s390/multiarch/memset.c: ... here.
* sysdeps/s390/s390-32/multiarch/memset.c: Delete File.
The renaming of hwcap arguments in ifunc-resolvers is needed
in order to prepare for further commits which refactors
ifunc handling for memset, memcmp, and memcpy. Now you are able
to use s390_libc_ifunc_init which stores the stfle bits
within the expression for an ifunc-resolver generated by
s390_libc_ifunc_expr.
ChangeLog:
* sysdeps/s390/multiarch/ifunc-resolve.h
(s390_libc_ifunc_init, s390_libc_ifunc,
s390_vx_libc_ifunc2_redirected): Use hwcap instead of dl_hwcap.
Add a configure check for z10 in the same way as done for z196.
ChangeLog:
* config.h.in (HAVE_S390_MIN_Z10_ZARCH_ASM_SUPPORT): New undefine.
* sysdeps/s390/configure.ac: Add check for z10 support.
* sysdeps/s390/configure: Regenerated.
* Since __fentry__ is almost the same as _mcount, reuse the code by
#including it twice with different #defines around.
* Remove LA usages - they are needed in 31-bit mode to clear the top
bit, but in 64-bit they appear to do nothing.
* Add CFI rule for the nonstandard return register. This rule applies
to the current function (binutils generates a new CIE - see
gas/dw2gencfi.c:select_cie_for_fde()), so it is not necessary to put
__fentry__ into a new file.
* Fix CFI offset for %r14.
* Add CFI rule for %r0.
* Fix unwound value of %r15 being off by 244 bytes.
* Unwinding in __fentry__@plt does not work, no plan to fix it - it
would require asking linker to generate CFI for return address in
%r0. From functional perspective keeping it broken is fine, since
the callee did not have a chance to do anything yet. From
convenience perspective it would be possible to enhance GDB in the
future to treat __fentry__@plt in a special way.
* Fix whitespace.
* Fix offsets in comments, which were copied from 32-bit code.
* 32-bit version will not be implemented, since it's not compatible
with the corresponding PLT stubs: they assume %r12 points to GOT,
which is not the case for gcc-emitted __fentry__ stub, which runs
before the prolog.
This patch adds the runtime support in glibc for the -mfentry
gcc feature introduced in [1] and [2].
[1] https://gcc.gnu.org/ml/gcc-patches/2018-07/msg00784.html
[2] https://gcc.gnu.org/ml/gcc-patches/2018-07/msg00912.html
ChangeLog:
* sysdeps/s390/s390-64/Versions (__fentry__): Add.
* sysdeps/s390/s390-64/s390x-mcount.S: Move the common
code to s390x-mcount.h and #include it.
* sysdeps/s390/s390-64/s390x-mcount.h: New file.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist
(__fentry__): Add.
The following combinations need to be tested:
* 32- (g5, esa and zarch) and 64-bit
* linux32 glibc/configure CC='gcc -m31 -march=g5'
* linux32 glibc/configure CC='gcc -m31'
* linux32 glibc/configure CC='gcc -m31 -mzarch'
* With and without VX:
* glibc/configure libc_cv_asm_s390_vx=no
* With and without profiling (using LD_PROFILE)
* With and without pltexit (using LD_AUDIT)
ChangeLog:
* sysdeps/s390/Makefile: Register the new tests.
* sysdeps/s390/tst-dl-runtime-mod.S: New file.
* sysdeps/s390/tst-dl-runtime-profile-audit.c: New file.
* sysdeps/s390/tst-dl-runtime-profile-noaudit.c: New file.
* sysdeps/s390/tst-dl-runtime-resolve-audit.c: New file.
* sysdeps/s390/tst-dl-runtime-resolve-noaudit.c: New file.
* sysdeps/s390/tst-dl-runtime.c: New file.
_init and _fini are special functions provided by glibc for linker to
define DT_INIT and DT_FINI in executable and shared library. They
should never be put in dynamic symbol table. This patch marks them as
hidden to remove them from dynamic symbol table.
Tested with build-many-glibcs.py.
[BZ #23145]
* elf/Makefile (tests-special): Add $(objpfx)check-initfini.out.
($(all-built-dso:=.dynsym): New target.
(common-generated): Add $(all-built-dso:$(common-objpfx)%=%.dynsym).
($(objpfx)check-initfini.out): New target.
(generated): Add check-initfini.out.
* scripts/check-initfini.awk: New file.
* sysdeps/aarch64/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/alpha/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/arm/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/hppa/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/i386/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/ia64/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/m68k/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/microblaze/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/mips/mips32/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/mips/mips64/n32/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/mips/mips64/n64/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/nios2/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/powerpc/powerpc32/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/powerpc/powerpc64/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/s390/s390-32/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/s390/s390-64/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/sh/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/sparc/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/x86_64/crti.S (_init): Mark as hidden.
(_fini): Likewise.
Wrap symbol address run-time calculation into a macro and use it
throughout, replacing inline calculations.
There are a couple of variants, most of them different in a functionally
insignificant way. Most calculations are right following RESOLVE_MAP,
at which point either the map or the symbol returned can be checked for
validity as the macro sets either both or neither. In some places both
the symbol and the map has to be checked however.
My initial implementation therefore always checked both, however that
resulted in code larger by as much as 0.3%, as many places know from
elsewhere that no check is needed. I have decided the size growth was
unacceptable.
Having looked closer I realized that it's the map that is the culprit.
Therefore I have modified LOOKUP_VALUE_ADDRESS to accept an additional
boolean argument telling it to access the map without checking it for
validity. This in turn has brought quite nice results, with new code
actually being smaller for i686, and MIPS o32, n32 and little-endian n64
targets, unchanged in size for x86-64 and, unusually, marginally larger
for big-endian MIPS n64, as follows:
i686:
text data bss dec hex filename
152255 4052 192 156499 26353 ld-2.27.9000-base.so
152159 4052 192 156403 262f3 ld-2.27.9000-elf-symbol-value.so
MIPS/o32/el:
text data bss dec hex filename
142906 4396 260 147562 2406a ld-2.27.9000-base.so
142890 4396 260 147546 2405a ld-2.27.9000-elf-symbol-value.so
MIPS/n32/el:
text data bss dec hex filename
142267 4404 260 146931 23df3 ld-2.27.9000-base.so
142171 4404 260 146835 23d93 ld-2.27.9000-elf-symbol-value.so
MIPS/n64/el:
text data bss dec hex filename
149835 7376 408 157619 267b3 ld-2.27.9000-base.so
149787 7376 408 157571 26783 ld-2.27.9000-elf-symbol-value.so
MIPS/o32/eb:
text data bss dec hex filename
142870 4396 260 147526 24046 ld-2.27.9000-base.so
142854 4396 260 147510 24036 ld-2.27.9000-elf-symbol-value.so
MIPS/n32/eb:
text data bss dec hex filename
142019 4404 260 146683 23cfb ld-2.27.9000-base.so
141923 4404 260 146587 23c9b ld-2.27.9000-elf-symbol-value.so
MIPS/n64/eb:
text data bss dec hex filename
149763 7376 408 157547 2676b ld-2.27.9000-base.so
149779 7376 408 157563 2677b ld-2.27.9000-elf-symbol-value.so
x86-64:
text data bss dec hex filename
148462 6452 400 155314 25eb2 ld-2.27.9000-base.so
148462 6452 400 155314 25eb2 ld-2.27.9000-elf-symbol-value.so
[BZ #19818]
* sysdeps/generic/ldsodefs.h (LOOKUP_VALUE_ADDRESS): Add `set'
parameter.
(SYMBOL_ADDRESS): New macro.
[!ELF_FUNCTION_PTR_IS_SPECIAL] (DL_SYMBOL_ADDRESS): Use
SYMBOL_ADDRESS for symbol address calculation.
* elf/dl-runtime.c (_dl_fixup): Likewise.
(_dl_profile_fixup): Likewise.
* elf/dl-symaddr.c (_dl_symbol_address): Likewise.
* elf/rtld.c (dl_main): Likewise.
* sysdeps/aarch64/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/alpha/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/arm/dl-machine.h (elf_machine_rel): Likewise.
(elf_machine_rela): Likewise.
* sysdeps/hppa/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/hppa/dl-symaddr.c (_dl_symbol_address): Likewise.
* sysdeps/i386/dl-machine.h (elf_machine_rel): Likewise.
(elf_machine_rela): Likewise.
* sysdeps/ia64/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/m68k/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/microblaze/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/mips/dl-machine.h (ELF_MACHINE_BEFORE_RTLD_RELOC):
Likewise.
(elf_machine_reloc): Likewise.
(elf_machine_got_rel): Likewise.
* sysdeps/mips/dl-trampoline.c (__dl_runtime_resolve): Likewise.
* sysdeps/nios2/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/powerpc/powerpc64/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/riscv/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/s390/s390-32/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/s390/s390-64/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/sh/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/sparc/sparc32/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/sparc/sparc64/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/tile/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/x86_64/dl-machine.h (elf_machine_rela): Likewise.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Remove the now unused target specific__ieee754_sqrt(f/l) inlines.
Also remove inlines of sqrt which are for really old GCC versions.
Removing these is desirable, under the general principle of leaving
such inlining to the compiler rather than trying to do it in installed
headers, especially when only very old compilers are affected.
Note that removing inlines for __ieee754_sqrt disables inlining in the
sqrt wrapper functions. Given the sqrt function will typically only be
called for negative arguments, it doesn't matter whether the inlining
happens or not.
* sysdeps/aarch64/fpu/math_private.h (__ieee754_sqrt): Remove.
(__ieee754_sqrtf): Remove.
* sysdeps/alpha/fpu/math_private.h (__ieee754_sqrt): Remove.
(__ieee754_sqrtf): Remove.
* sysdeps/generic/math-type-macros.h (M_SQRT): Use sqrt.
* sysdeps/m68k/m680x0/fpu/mathimpl.h (__ieee754_sqrt): Remove.
* sysdeps/powerpc/fpu/math_private.h (__ieee754_sqrt): Remove.
(__ieee754_sqrtf): Remove.
* sysdeps/s390/fpu/bits/mathinline.h: Remove file.
* sysdeps/sparc/fpu/bits/mathinline.h (sqrt) Remove.
(sqrtf): Remove.
(sqrtl): Remove.
(__ieee754_sqrt): Remove.
(__ieee754_sqrtf): Remove.
(__ieee754_sqrtl): Remove.
* sysdeps/m68k/m680x0/fpu/mathimpl.h (__ieee754_sqrt): Remove.
* sysdeps/x86/fpu/math_private.h (__ieee754_sqrt): Remove.
* sysdeps/x86_64/fpu/math_private.h (__ieee754_sqrt): Remove.
(__ieee754_sqrtf): Remove.
(__ieee754_sqrtl): Remove.
Since __libc_longjmp is a private interface for cancellation implementation
in libpthread, there is no need to provide hidden __libc_longjmp in libc.
Tested with build-many-glibcs.py.
* include/setjmp.h (__libc_longjmp): Remove libc_hidden_proto.
* setjmp/longjmp.c (__libc_longjmp): Remove libc_hidden_def.
* sysdeps/s390/longjmp.c (__libc_longjmp): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/longjmp.S (__libc_longjmp):
Likewise.
Building glibc for s390 with -Os (32-bit only, with GCC 7) fails with:
In file included from ../sysdeps/s390/multiarch/8bit-generic.c:370:0,
from ebcdic-at-de.c:28:
../iconv/loop.c: In function '__to_generic_vx':
../iconv/loop.c:264:22: error: 'ch' may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (((Character) >> 7) == (0xe0000 >> 7)) \
^~
In file included from ebcdic-at-de.c:28:0:
../sysdeps/s390/multiarch/8bit-generic.c:340:15: note: 'ch' was declared here
uint32_t ch; \
^
../iconv/loop.c:325:7: note: in expansion of macro 'BODY'
BODY
^~~~
It's fairly easy to see, looking at the (long) expansion of the BODY
macro, that this is a false positive and the relevant variable 'ch' is
always initialized before use, in one of two possible places. As
such, disabling the warning for -Os with the DIAG_* macros is the
natural approach to fix this build failure. However, because of the
location at which the warning is reported, the disabling needs to go
in iconv/loop.c, around the definition of UNICODE_TAG_HANDLER (not
inside the definition), as that macro definition is where the
uninitialized use is reported, whereas the code that needs to be
reasoned about to see that the warning is a false positive is in the
definition of BODY elsewhere.
Thus, the patch adds such disabling in iconv/loop.c, with a comment
pointing to the s390-specific code and a comment in the s390-specific
code pointing to the generic file to alert people to the possible need
to update one place when changing the other. It would be possible if
desired to use #ifdef __s390__ around the disabling, though in general
we try to avoid that sort of thing in generic files. (Or some
extremely specialized macros for "disable -Wmaybe-uninitialized in
this particular place" could be specified, defined to 0 in a lot of
different files that include iconv/loop.c and to 1 in that particular
s390 file.)
Tested that this fixed -Os compilation for s390-linux-gnu with
build-many-glibcs.py.
* iconv/loop.c (UNICODE_TAG_HANDLER): Disable
-Wmaybe-uninitialized for -Os.
* sysdeps/s390/multiarch/8bit-generic.c (BODY): Add comment about
this disabling.
After regenerating ULPs from scratch in
commit 8e7196c875, I've missed
to test it with multiple gcc versions. Hence, here is a further update.
ChangeLog:
* sysdeps/s390/fpu/libm-test-ulps: Regenerated.
We have a general principle of preferring optimizations for library
facilities to use compiler built-in functions rather than being
located in library headers, where the compiler can reasonably optimize
code without needing to know glibc implementation details.
This patch applies this principle to bits/byteswap.h, eliminating all
the architecture-specific variants and bits/byteswap-16.h. The
__bswap_16, __bswap_32 and __bswap_64 interfaces all become inline
functions, never macros, using the GCC built-in functions where
available and otherwise a single architecture-independent definition
using shifts and masking (which compilers may well be able to detect
and optimize; GCC has detection of various byte-swapping idioms).
The __bswap_constant_32 macro needs to stay around because of uses in
static initializers within glibc and its tests, and so for consistency
all __bswap_constant_* are kept rather than just being inlined into
the old-GCC-or-non-GCC parts of the __bswap_* inline function
definitions.
Various open bugs are addressed by this cleanup, with caveats about
exactly what is covered by those bugs and when the bugs applied at
all.
Bug 14508 reports -Wformat warnings building glibc because __bswap_*
sometimes returned the wrong types. Obviously we already don't have
such warnings any more or the build would be failing, given -Werror,
and I suspect that bug was originally for wrong types for x86_64, as
fixed by commit d394eb742a (glibc 2.17).
The only case I saw removed by this patch where the types would still
have been wrong was the non-__GNUC__ case of __bswap_64 in the s390
header (using unsigned long long int, but uint64_t would be unsigned
long int for 64-bit). In any case, the single header consistently
uses __uintN_t types after this patch, thereby eliminating all such
bugs. The existing string/test-endian-types.c test already suffices
to verify that the types are correct with the compiler used to build
glibc and its tests.
Bug 15512 reports an error from __bswap_constant_16 with -Werror
-Wsign-conversion. I am unable to reproduce this with any GCC version
supporting -Wsign-conversion - all seem to be able to avoid warning
for ((x) >> 8) & 0xffu, where x is uint16_t, which while it formally
does involve an implicit conversion from int to unsigned int, is also
a case where it should be easy for the compiler to see that the value
converted is never negative. But in this patch __bswap_constant_16 is
changed to use signed 0xff so that no such implicit conversion occurs
at all, and a test with -Werror -Wsign-conversion is added.
Bug 17082 objects to the use of ({}) statement expressions in these
macros preventing use at file scope (in C, that's in sizeof etc.; in
C++, more generally in static initializers). The particular case of
these interfaces is fixed by this patch as it changes them to inline
functions, eliminating all uses of ({}) in bits/byteswap.h, and a
corresponding testcase is added. The bug tries to raise a more
general policy question about use of ({}) in macros in installed
headers, referring to "many other libc functions" (unspecified which
functions are being considered).
Since such policy questions belong on libc-alpha, and since there
*are* macros in installed headers which can't really avoid using ({})
(where they are type-generic, so can't use an inline function, but
need a temporary variable, and a few where the interface involves
returning memory from alloca so can't use an inline function either),
I propose to consider that bug fixed with this change. That is
without prejudice to any other new bugs anyone wishes to file *for
precisely defined sets of macros* requesting moving away from ({})
*where it is clearly possible for those interfaces*. Where ({}) can
be avoided, typically by use of an inline function, I think that's a
good idea - that inline functions are typically to be preferred to
({}) for header interfaces where such optimizations are useful but the
interface is suited to being defined using an inline function.
Bug 20530 requests use of __builtin_bswap16 when available (GCC 4.8
and later), which this patch implements.
Tested for x86_64, and with build-many-glibcs.py. Also did an x86_64
test with the __GNUC_PREREQ conditionals changed to "#if 0" to verify
the old-GCC/non-GCC case in the headers. (There are already existing
tests for correctness of results of these interfaces.)
[BZ #14508]
[BZ #15512]
[BZ #17082]
[BZ #20530]
* bits/byteswap.h: Update file comment. Do not include
<bits/byteswap-16.h>.
(__bswap_constant_16): Cast result to __uint16_t. Use signed 0xff
constant.
(__bswap_16): Define as inline function.
(__bswap_constant_32): Reformat definition.
(__bswap_32): Always define as inline function, not macro, using
__uint32_t. Use __builtin_bswap32 if [__GNUC_PREREQ (4, 3)],
otherwise __bswap_constant_32.
(__bswap_constant_64): Reformat definition. Do not use
__extension__ here.
(__bswap_64): Always define as inline function, not macro. Use
__extension__ on function definition. Use __builtin_bswap64 if
[__GNUC_PREREQ (4, 3)], otherwise __bswap_constant_64.
* string/test-endian-file-scope.c: New file.
* string/test-endian-sign-conversion.c: Likewise.
* string/Makefile (headers): Remove bits/byteswap-16.h.
(tests): Add test-endian-file-scope and
test-endian-sign-conversion.
(CFLAGS-test-endian-sign-conversion.c): New variable.
* bits/byteswap-16.h: Remove file.
* sysdeps/ia64/bits/byteswap-16.h: Likewise.
* sysdeps/ia64/bits/byteswap.h: Likewise.
* sysdeps/m68k/bits/byteswap.h: Likewise.
* sysdeps/s390/bits/byteswap-16.h: Likewise.
* sysdeps/s390/bits/byteswap.h: Likewise.
* sysdeps/tile/bits/byteswap.h: Likewise.
* sysdeps/x86/bits/byteswap-16.h: Likewise.
* sysdeps/x86/bits/byteswap.h: Likewise.
My fix for bug 22702 introduced linknamespace test failures on
s390x-linux-gnu and s390-linux-gnu because it made remainder call
__feholdexcept, and the s390 __feholdexcept calls fegetenv, and
remainder is in Unix98 and XPG4.2 but fegetenv isn't. This patch
makes __feholdexcept call __fegetenv instead to avoid that namespace
issue.
Tested (compilation) with build-many-glibcs.py for s390x-linux-gnu,
where it resolves the test failures.
* sysdeps/s390/fpu/feholdexcpt.c (__feholdexcept): Call __fegetenv
instead of fegetenv.
In _dl_runtime_resolve[_vx], unwinding fails after the new stack frame
is created as there is no CFI rule for r15. This is also observeable in
GDB: Backtrace stopped: previous frame inner to this frame (corrupt stack?)
Therefore this patch is now storing r15 on stack and is using cfi_offset rule.
The stmg/lmg instruction is used to store/load r14 and r15 with one instruction.
On 64bit, the offsets of the fprs have moved to store r15 directly after r14.
On 31bit, the r14/r15 is now stored between the other gprs and fprs as the space
wasn't used.
ChangeLog:
* sysdeps/s390/s390-64/dl-trampoline.h (_dl_runtime_resolve):
Store r15 on stack and add cfi rule.
* sysdeps/s390/s390-32/dl-trampoline.h (_dl_runtime_resolve):
Likewise.
This patch adds several new tunables to control the behavior of
elision on supported platforms[1]. Since elision now depends
on tunables, we should always *compile* with elision enabled,
and leave the code disabled, but available for runtime
selection. This gives us *much* better compile-time testing of
the existing code to avoid bit-rot[2].
Tested on ppc, ppc64, ppc64le, s390x and x86_64.
[1] This part of the patch was initially proposed by
Paul Murphy but was "staled" because the framework have changed
since the patch was originally proposed:
https://patchwork.sourceware.org/patch/10342/
[2] This part of the patch was inititally proposed as a RFC by
Carlos O'Donnell. Make sense to me integrate this on the patch:
https://sourceware.org/ml/libc-alpha/2017-05/msg00335.html
* elf/dl-tunables.list: Add elision parameters.
* manual/tunables.texi: Add entries about elision tunable.
* sysdeps/unix/sysv/linux/powerpc/elision-conf.c:
Add callback functions to dynamically enable/disable elision.
Add multiple callbacks functions to set elision parameters.
Deleted __libc_enable_secure check.
* sysdeps/unix/sysv/linux/s390/elision-conf.c: Likewise.
* sysdeps/unix/sysv/linux/x86/elision-conf.c: Likewise.
* configure: Regenerated.
* configure.ac: Option enable_lock_elision was deleted.
* config.h.in: ENABLE_LOCK_ELISION flag was deleted.
* config.make.in: Remove references to enable_lock_elision.
* manual/install.texi: Elision configure option was removed.
* INSTALL: Regenerated to remove enable_lock_elision.
* nptl/Makefile:
Disable elision so it can verify error case for destroying a mutex.
* sysdeps/powerpc/nptl/elide.h:
Cleanup ENABLE_LOCK_ELISION check.
Deleted macros for the case when ENABLE_LOCK_ELISION was not defined.
* sysdeps/s390/configure: Regenerated.
* sysdeps/s390/configure.ac: Remove references to enable_lock_elision..
* nptl/tst-mutex8.c:
Deleted all #ifndef ENABLE_LOCK_ELISION from the test.
* sysdeps/powerpc/powerpc32/sysdep.h:
Deleted all ENABLE_LOCK_ELISION checks.
* sysdeps/powerpc/powerpc64/sysdep.h: Likewise.
* sysdeps/powerpc/sysdep.h: Likewise.
* sysdeps/s390/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/force-elision.h: Likewise.
* sysdeps/unix/sysv/linux/s390/elision-conf.h: Likewise.
* sysdeps/unix/sysv/linux/s390/force-elision.h: Likewise.
* sysdeps/unix/sysv/linux/s390/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/s390/Makefile: Remove references to
enable-lock-elision.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes an s390 libm function implementation use
libm_alias_float to define function aliases.
Tested with build-many-glibcs.py for s390-linux-gnu and
s390x-linux-gnu that installed stripped shared libraries are unchanged
by the patch.
* sysdeps/s390/fpu/s_fmaf.c: Include <libm-alias-float.h>.
[!__fmaf] (fmaf): Define using libm_alias_float.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes s390 libm function implementations use
libm_alias_double to define function aliases. This allows
sysdeps/unix/sysv/linux/s390/fpu/s_fma.c to be removed, as
libm_alias_double handles symbol versioning for long double compat
symbols.
Tested with build-many-glibcs.py for s390-linux-gnu and
s390x-linux-gnu that installed stripped shared libraries are unchanged
by the patch.
* sysdeps/s390/fpu/s_fma.c: Include <libm-alias-double.h>.
[!__fma] (fma): Define using libm_alias_double.
* sysdeps/unix/sysv/linux/s390/fpu/s_fma.c: Remove.
GDB failed to detect the outermost frame while showing the backtrace
within a thread:
Backtrace stopped: previous frame identical to this frame (corrupt stack?)
Before this patch, the start routines like thread_start had no cfi information.
GDB is then using the prologue unwinder if no cfi information is available.
This unwinder tries to unwind r15 and stops e.g. if r15 was updated or
on some jump-instructions.
On older glibc-versions (before commit "Remove cached PID/TID in clone"
c579f48edb), the thread_start function used
such a jump-instruction and GDB did not fail with an error.
This patch adds cfi information for _start, thread_start and __makecontext_ret
and marks r14 as undefined which marks the frame as outermost frame and GDB
stops the backtrace. Also tested different gcc versions in order to test
_Unwind_Backtrace() in libgcc as this is used by backtrace() in glibc.
ChangeLog:
* sysdeps/s390/s390-64/start.S (_start): Add cfi information for r14.
* sysdeps/s390/s390-32/start.S: (_start): Likewise
* sysdeps/unix/sysv/linux/s390/s390-64/clone.S
(thread_start): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/clone.S
(thread_start): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/__makecontext_ret.S
(__makecontext_ret): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/__makecontext_ret.S
(__makecontext_ret): Likewise.
This patch adds two new internal defines to set the internal
pthread_mutex_t layout required by the supported ABIS:
1. __PTHREAD_MUTEX_NUSERS_AFTER_KIND which control whether to define
__nusers fields before or after __kind. The preferred value for
is 0 for new ports and it sets __nusers before __kind.
2. __PTHREAD_MUTEX_USE_UNION which control whether internal __spins and
__list members will be place inside an union for linuxthreads
compatibility. The preferred value is 0 for ports and it sets
to not use an union to define both fields.
It fixes the wrong offsets value for __kind value on x86_64-linux-gnu-x32.
Checked with a make check run-built-tests=no on all afected ABIs.
[BZ #22298]
* nptl/allocatestack.c (allocate_stack): Check if
__PTHREAD_MUTEX_HAVE_PREV is non-zero, instead if
__PTHREAD_MUTEX_HAVE_PREV is defined.
* nptl/descr.h (pthread): Likewise.
* nptl/nptl-init.c (__pthread_initialize_minimal_internal):
Likewise.
* nptl/pthread_create.c (START_THREAD_DEFN): Likewise.
* sysdeps/nptl/fork.c (__libc_fork): Likewise.
* sysdeps/nptl/pthread.h (PTHREAD_MUTEX_INITIALIZER): Likewise.
* sysdeps/nptl/bits/thread-shared-types.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): New
defines.
(__pthread_internal_list): Check __PTHREAD_MUTEX_USE_UNION instead
of __WORDSIZE for internal layout.
(__pthread_mutex_s): Check __PTHREAD_MUTEX_NUSERS_AFTER_KIND instead
of __WORDSIZE for internal __nusers layout and __PTHREAD_MUTEX_USE_UNION
instead of __WORDSIZE whether to use an union for __spins and __list
fields.
(__PTHREAD_MUTEX_HAVE_PREV): Define also for __PTHREAD_MUTEX_USE_UNION
case.
* sysdeps/aarch64/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): New
defines.
* sysdeps/alpha/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/arm/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/hppa/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/ia64/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/m68k/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/microblaze/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/mips/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/nios2/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/powerpc/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/s390/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/sh/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/sparc/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/tile/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/x86/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch adds a new build test to check for internal fields
offsets for user visible internal field. Although currently
the only field which is statically initialized to a non zero value
is pthread_mutex_t.__data.__kind value, the tests also check the
offset of __kind, __spins, __elision (if supported), and __list
internal member. A internal header (pthread-offset.h) is added
to each major ABI with the reference value.
Checked on x86_64-linux-gnu and with a build check for all affected
ABIs (aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabihf,
hppa-linux-gnu, i686-linux-gnu, ia64-linux-gnu, m68k-linux-gnu,
microblaze-linux-gnu, mips64-linux-gnu, mips64-n32-linux-gnu,
mips-linux-gnu, powerpc64le-linux-gnu, powerpc-linux-gnu,
s390-linux-gnu, s390x-linux-gnu, sh4-linux-gnu, sparc64-linux-gnu,
sparcv9-linux-gnu, tilegx-linux-gnu, tilegx-linux-gnu-x32,
tilepro-linux-gnu, x86_64-linux-gnu, and x86_64-linux-x32).
* nptl/pthreadP.h (ASSERT_PTHREAD_STRING,
ASSERT_PTHREAD_INTERNAL_OFFSET): New macro.
* nptl/pthread_mutex_init.c (__pthread_mutex_init): Add build time
checks for internal pthread_mutex_t offsets.
* sysdeps/aarch64/nptl/pthread-offsets.h
(__PTHREAD_MUTEX_NUSERS_OFFSET, __PTHREAD_MUTEX_KIND_OFFSET,
__PTHREAD_MUTEX_SPINS_OFFSET, __PTHREAD_MUTEX_ELISION_OFFSET,
__PTHREAD_MUTEX_LIST_OFFSET): New macro.
* sysdeps/alpha/nptl/pthread-offsets.h: Likewise.
* sysdeps/arm/nptl/pthread-offsets.h: Likewise.
* sysdeps/hppa/nptl/pthread-offsets.h: Likewise.
* sysdeps/i386/nptl/pthread-offsets.h: Likewise.
* sysdeps/ia64/nptl/pthread-offsets.h: Likewise.
* sysdeps/m68k/nptl/pthread-offsets.h: Likewise.
* sysdeps/microblaze/nptl/pthread-offsets.h: Likewise.
* sysdeps/mips/nptl/pthread-offsets.h: Likewise.
* sysdeps/nios2/nptl/pthread-offsets.h: Likewise.
* sysdeps/powerpc/nptl/pthread-offsets.h: Likewise.
* sysdeps/s390/nptl/pthread-offsets.h: Likewise.
* sysdeps/sh/nptl/pthread-offsets.h: Likewise.
* sysdeps/sparc/nptl/pthread-offsets.h: Likewise.
* sysdeps/tile/nptl/pthread-offsets.h: Likewise.
* sysdeps/x86_64/nptl/pthread-offsets.h: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch obsoletes the pow10, pow10f and pow10l functions (makes
them into compat symbols, not available for new ports or static
linking). The exp10 names for these functions are standardized (in TS
18661-4) and were added in the same glibc version (2.1) as pow10 so
source code can change to use them without any loss of portability.
Since pow10 is deliberately not provided for _Float128, only exp10,
this slightly simplifies moving to the new wrapper templates in the
!LIBM_SVID_COMPAT case, by avoiding needing to arrange for pow10,
pow10f and pow10l to be defined by those templates.
Tested for x86_64, and with build-many-glibcs.py.
* manual/math.texi (pow10): Do not document.
(pow10f): Likewise.
(pow10l): Likewise.
* math/bits/mathcalls.h [__USE_GNU] (pow10): Do not declare.
* math/bits/math-finite.h [__USE_GNU] (pow10): Likewise.
* math/libm-test-exp10.inc (pow10_test): Remove.
(do_test): Do not call pow10.
* math/w_exp10_compat.c (pow10): Make into compat symbol.
[NO_LONG_DOUBLE] (pow10l): Likewise.
* math/w_exp10f_compat.c (pow10f): Likewise.
* math/w_exp10l_compat.c (pow10l): Likewise.
* sysdeps/ia64/fpu/e_exp10.S: Include <shlib-compat.h>.
(pow10): Make into compat symbol.
* sysdeps/ia64/fpu/e_exp10f.S: Include <shlib-compat.h>.
(pow10f): Make into compat symbol.
* sysdeps/ia64/fpu/e_exp10l.S: Include <shlib-compat.h>.
(pow10l): Make into compat symbol.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Remove
pow10.
(CFLAGS-nldbl-pow10.c): Remove variable..
* sysdeps/ieee754/ldbl-opt/nldbl-pow10.c: Remove file.
* sysdeps/ieee754/ldbl-opt/w_exp10_compat.c (pow10l): Condition on
[SHLIB_COMPAT (libm, GLIBC_2_1, GLIBC_2_27)].
* sysdeps/ieee754/ldbl-opt/w_exp10l_compat.c (compat_symbol):
Undefine and redefine.
(pow10l): Make into compat symbol.
* sysdeps/aarch64/libm-test-ulps: Remove pow10 ulps.
* sysdeps/alpha/fpu/libm-test-ulps: Likewise.
* sysdeps/arm/libm-test-ulps: Likewise.
* sysdeps/hppa/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* sysdeps/microblaze/libm-test-ulps: Likewise.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/nios2/libm-test-ulps: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
* sysdeps/s390/fpu/libm-test-ulps: Likewise.
* sysdeps/sh/libm-test-ulps: Likewise.
* sysdeps/sparc/fpu/libm-test-ulps: Likewise.
* sysdeps/tile/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
The new IBM z14 is added to platform string array.
The macro _DL_PLATFORMS_COUNT is incremented.
ChangeLog:
* sysdeps/s390/dl-procinfo.c (_dl_s390_cap_flags): Add z14.
* sysdeps/s390/dl-procinfo.h (_DL_PLATFORMS_COUNT): Increased.
This patch implements a requirement of binutils >= 2.25 (up from 2.22)
to build glibc. Tests for 2.24 or later on x86_64 and s390 are
removed. It was already the case, as indicated by buildbot results,
that 2.24 was too old for building tests for 32-bit x86 (produced
internal linker errors linking elf/tst-gnu2-tls1mod.so). I don't know
if any configure tests for binutils features are obsolete given the
increased version requirement.
Tested for x86_64.
* configure.ac (AS): Require binutils 2.25 or later.
(LD): Likewise.
* configure: Regenerated.
* sysdeps/s390/configure.ac (AS): Remove version check.
* sysdeps/s390/configure: Regenerated.
* sysdeps/x86_64/configure.ac (AS): Remove version check.
* sysdeps/x86_64/configure: Regenerated.
* manual/install.texi (Tools for Compilation): Document
requirement for binutils 2.25 or later.
* INSTALL: Regenerated.
This patch adds an ifunc variant to use the cu instruction on arch12 CPUs.
This new ifunc variant can be built if binutils support z13 vector
instructions. At runtime, HWCAP_S390_VXE decides if we can use the
cu21 instruction.
ChangeLog:
* sysdeps/s390/utf8-utf16-z9.c (__to_utf8_loop_vx_cu):
Use vector and cu21 instruction.
* sysdeps/s390/multiarch/utf8-utf16-z9.c:
Add __to_utf8_loop_vx_cu in ifunc resolver.
This patch adds an ifunc variant to use the cu instruction on arch12 CPUs.
This new ifunc variant can be built if binutils support z13 vector
instructions. At runtime, HWCAP_S390_VXE decides if we can use the
cu24 instruction.
ChangeLog:
* sysdeps/s390/utf16-utf32-z9.c (__from_utf16_loop_vx_cu):
Use vector and cu24 instruction.
* sysdeps/s390/multiarch/utf16-utf32-z9.c:
Add __from_utf16_loop_vx_cu in ifunc resolver.
This patch adds an ifunc variant to use the cu instruction on arch12 CPUs.
This new ifunc variant can be built if binutils support z13 vector
instructions. At runtime, HWCAP_S390_VXE decides if we can use the
cu42 instruction.
ChangeLog:
* sysdeps/s390/utf16-utf32-z9.c (__to_utf16_loop_vx_cu):
Use vector and cu42 instruction.
* sysdeps/s390/multiarch/utf16-utf32-z9.c:
Add __to_utf16_loop_vx_cu in ifunc resolver.
This patch adds an ifunc variant to use the cu instruction on arch12 CPUs.
This new ifunc variant can be built if binutils support z13 vector
instructions. At runtime, HWCAP_S390_VXE decides if we can use the
cu41 instruction.
ChangeLog:
* sysdeps/s390/utf8-utf32-z9.c (__to_utf8_loop_vx_cu):
Use vector and cu41 instruction.
* sysdeps/s390/multiarch/utf8-utf32-z9.c: Add __to_utf8_loop_vx_cu
in ifunc resolver.
The new hwcap values indicate support for:
- Vector packed decimal facility
- Vector enhancements facility 1
- Guarded storage facility
Note: arch12 is NOT the official name of the new CPU.
It refers to the edition number of the Principle of Operations manual.
ChangeLog:
* sysdeps/s390/dl-procinfo.c (_dl_s390_cap_flags):
Add vxd, vxe, gs flag.
* sysdeps/s390/dl-procinfo.h: Add HWCAP_S390_VXD, HWCAP_S390_VXE,
HWCAP_S390_GS capability.
* sysdeps/unix/sysv/linux/s390/bits/hwcap.h
(HWCAP_S390_VXD, HWCAP_S390_VXE, HWCAP_S390_GS): Define.
The testcases elf/tst-tls1-static and elf/tst-tls2-static
are failing on s390 if gcc is configured with --enable-default-pie.
According to binutils, there are only four valid cases for IE -> LE transition:
lg %rx,(0,%ry) -> sllg %rx,%ry,0
lg %rx,(%ry,0) -> sllg %rx,%ry,0
lg %rx,(%ry,%r12) -> sllg %rx,%ry,0
lg %rx,(%r12,%ry) -> sllg %rx,%ry,0
Thus I've adjusted the TLS_IE macro in s390 tls-macros.h files in PIC case
in order to use r12 for the address of global offset table.
The adjusted macro definition is not used if gcc is not configured with
--enable-default-pie.
ChangeLog:
* sysdeps/s390/s390-32/tls-macros.h (TLS_IE): Use r12 for GOT address.
* sysdeps/s390/s390-64/tls-macros.h (TLS_IE): Likewise.
These machine-dependent inline string functions have never been on by
default, and even if they were a good idea at the time they were
introduced, they haven't really been touched in ten to fifteen years
and probably aren't a good idea on current-gen processors. Current
thinking is that this class of optimization is best left to the
compiler.
* bits/string.h, string/bits/string.h
* sysdeps/aarch64/bits/string.h
* sysdeps/m68k/m680x0/m68020/bits/string.h
* sysdeps/s390/bits/string.h, sysdeps/sparc/bits/string.h
* sysdeps/x86/bits/string.h: Delete file.
* string/string.h: Don't include bits/string.h.
* string/bits/string3.h: Rename to bits/string_fortified.h.
No need to undef various symbols that the removed headers
might have defined as macros.
* string/Makefile (headers): Remove bits/string.h, change
bits/string3.h to bits/string_fortified.h.
* string/string-inlines.c: Update commentary. Remove definitions
of various macros that nothing looks at anymore. Don't directly
include bits/string.h. Set _STRING_INLINE_unaligned here, based on
compiler-predefined macros.
* string/strncat.c: If STRNCAT is not defined, or STRNCAT_PRIMARY
_is_ defined, provide internal hidden alias __strncat.
* include/string.h: Declare internal hidden alias __strncat.
Only forward __stpcpy to __builtin_stpcpy if __NO_STRING_INLINES is
not defined.
* include/bits/string3.h: Rename to bits/string_fortified.h,
update to match above.
* sysdeps/i386/string-inlines.c: Define compat symbols for
everything formerly defined by sysdeps/x86/bits/string.h.
Make existing definitions into compat symbols as well.
Remove some no-longer-necessary messing around with macros.
* sysdeps/powerpc/powerpc32/power4/multiarch/mempcpy.c
* sysdeps/powerpc/powerpc64/multiarch/mempcpy.c
* sysdeps/powerpc/powerpc64/multiarch/stpcpy.c
* sysdeps/s390/multiarch/mempcpy.c
No need to define _HAVE_STRING_ARCH_mempcpy.
Do define __NO_STRING_INLINES and NO_MEMPCPY_STPCPY_REDIRECT.
* sysdeps/i386/i686/multiarch/strncat-c.c
* sysdeps/s390/multiarch/strncat-c.c
* sysdeps/x86_64/multiarch/strncat-c.c
Define STRNCAT_PRIMARY. Don't change definition of libc_hidden_def.
This patch removes PTRACE_GETREGS, PTRACE_SETREGS, PTRACE_GETFPREGS
and PTRACE_SETFPREGS as these requests does not exist on s390 kernel.
But the kernel has support for PTRACE_SINGLEBLOCK,
PTRACE_SECCOMP_GET_FILTER, PTRACE_PEEKUSR_AREA, PTRACE_POKEUSR_AREA,
PTRACE_GET_LAST_BREAK, PTRACE_ENABLE_TE, PTRACE_DISABLE_TE and
PTRACE_TE_ABORT_RAND. Thus those are defined now.
The current kernel s390 specific ptrace.h file also defines
PTRACE_PEEKTEXT_AREA, PTRACE_PEEKDATA_AREA, PTRACE_POKETEXT_AREA,
PTRACE_POKEDATA_AREA, PTRACE_PEEK_SYSTEM_CALL, PTRACE_POKE_SYSTEM_CALL
and PTRACE_PROT, but those requests are not supported.
Thus those defines are skipped in glibc ptrace.h.
There were old includes of ptrace.h in sysdeps/s390/fpu/fesetenv.c.
The ptrace feature isn't used there anymore, thus I removed the includes.
Before this patch, <glibc>/sysdeps/unix/sysv/linux/s390/sys/ptrace.h
uses ptrace-request 12 for PTRACE_GETREGS,
but <kernel>/include/uapi/linux/ptrace.h uses 12 for PTRACE_SINGLEBLOCK.
The s390 kernel has never had support for PTRACE_GETREGS!
Thus glibc ptrace.h is adjusted to match kernel ptrace.h.
The new s390 specific test ensures, that PTRACE_SINGLEBLOCK defined
in glibc works as expected. If the kernel would interpret it as
PTRACE_GETREGS, then the testcase will not make any progress
and will time out.
ChangeLog:
[BZ #21539]
* NEWS: Mention s390 ptrace request changes.
* sysdeps/unix/sysv/linux/s390/sys/ptrace.h
(PTRACE_GETREGS, PTRACE_SETREGS, PTRACE_GETFPREGS,
PTRACE_SETFPREGS): Remove enum constant.
(PT_GETREGS, PT_SETREGS, PT_GETFPREGS, T_SETFPREGS):
Remove defines.
(PTRACE_SINGLEBLOCK): New enum constant.
(PT_STEPBLOCK): New define.
(PTRACE_PEEKUSR_AREA, PTRACE_POKEUSR_AREA,
PTRACE_GET_LAST_BREAK, PTRACE_ENABLE_TE, PTRACE_DISABLE_TE,
PTRACE_TE_ABORT_RAND): New enum constant and define.
* sysdeps/s390/fpu/fesetenv.c: Remove ptrace.h includes.
* sysdeps/unix/sysv/linux/s390/tst-ptrace-singleblock.c:
New file.
* sysdeps/unix/sysv/linux/s390/Makefile: Add test.
Building glibc with gcc configured with --enable-default-pie failed on s390
due to assembler messages:
../sysdeps/unix/sysv/linux/s390/s390-32/__makecontext_ret.S:44:
Error: junk at end of line, first unrecognized character is `@'
HIDDEN_JUMPTARGET was expanded to exit@PLT@GOTOFF.
If SHARED is not defined, HIDDEN_JUMPTARGET is defined to JUMPTARGET
in sysdeps/s390/s390-32/sysdep.h. There it expanded to exit@PLT
in non SHARED case as PIC is defined if gcc is configured with
--enable-default-pie. Thus I've changed the "ifdef PIC" to "ifdef SHARED"
as we do not want PLTs in the static obj files. I've also changed this
in sysdeps/s390/s390-64/sysdep.h.
I've also adjusted sysdeps/unix/sysv/linux/s390/s390-32/__makecontext_ret.S.
If glibc is configured with --disable-hidden-plt, then NO_HIDDEN is defined.
In SHARED case HIDDEN_JUMPTARGET would be expanded to exit@PLT@GOTOFF
instead of __GI_exit@GOTOFF.
Now we jump to:
- __GI_exit if SHARED is defined
- exit@PLT if SHARED and NO_HIDDEN is defined
- exit if both are not defined.
On s390 31bit we have to setup GOT pointer in r12 if we use a PLT stub.
Therefore I use SYSCALL_PIC_SETUP from sysdep.h and added the missing semicolons.
ChangeLog:
[BZ #21537]
* sysdeps/s390/s390-32/sysdep.h (JUMPTARGET, SYSCALL_PIC_SETUP):
Check SHARED instead of PIC.
(SYSCALL_PIC_SETUP): Add missing semicolons.
* sysdeps/s390/s390-64/sysdep.h (JUMPTARGET, SYSCALL_PIC_SETUP):
Check SHARED instead of PIC.
* sysdeps/unix/sysv/linux/s390/s390-32/__makecontext_ret.S
(__makecontext_ret): Adjust code to jump to exit.
ELFv2 functions with localentry:0 are those with a single entry point,
ie. global entry == local entry, that have no requirement on r2 or
r12 and guarantee r2 is unchanged on return. Such an external
function can be called via the PLT without saving r2 or restoring it
on return, avoiding a common load-hit-store for small functions.
This patch implements the ld.so changes necessary for this
optimization. ld.so needs to check that an optimized plt call
sequence is in fact calling a function implemented with localentry:0,
end emit a fatal error otherwise.
The elf/testobj6.c change is to stop "error while loading shared
libraries: expected localentry:0 `preload'" when running
elf/preloadtest, which we'd get otherwise.
* elf/elf.h (PPC64_OPT_LOCALENTRY): Define.
* sysdeps/alpha/dl-machine.h (elf_machine_fixup_plt): Add
refsym and sym parameters. Adjust callers.
* sysdeps/aarch64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/arm/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/generic/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/hppa/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/i386/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/ia64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/m68k/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/microblaze/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/mips/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/nios2/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_fixup_plt):
Likewise.
* sysdeps/s390/s390-32/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/s390/s390-64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/sh/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/sparc/sparc32/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/sparc/sparc64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/tile/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/x86_64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/powerpc/powerpc64/dl-machine.c (_dl_error_localentry): New.
(_dl_reloc_overflow): Increase buffser size. Formatting.
* sysdeps/powerpc/powerpc64/dl-machine.h (ppc64_local_entry_offset):
Delete reloc param, add refsym and sym. Check optimized plt
call stubs for localentry:0 functions. Adjust callers.
(elf_machine_fixup_plt, elf_machine_plt_conflict): Add refsym
and sym parameters. Adjust callers.
(_dl_reloc_overflow): Move attribute.
(_dl_error_localentry): Declare.
* elf/dl-runtime.c (_dl_fixup): Save original sym. Pass
refsym and sym to elf_machine_fixup_plt.
* elf/testobj6.c (preload): Call printf.
This patch removes the s390 specific implementation of spinlock code
and is now using the generic one.
ChangeLog:
* sysdeps/s390/nptl/pthread_spin_init.c: Delete File.
* sysdeps/s390/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/s390/nptl/pthread_spin_trylock.c: Likewise.
* sysdeps/s390/nptl/pthread_spin_unlock.c: Likewise.
This patch optimizes the generic spinlock code.
The type pthread_spinlock_t is a typedef to volatile int on all archs.
Passing a volatile pointer to the atomic macros which are not mapped to the
C11 atomic builtins can lead to extra stores and loads to stack if such
a macro creates a temporary variable by using "__typeof (*(mem)) tmp;".
Thus, those macros which are used by spinlock code - atomic_exchange_acquire,
atomic_load_relaxed, atomic_compare_exchange_weak - have to be adjusted.
According to the comment from Szabolcs Nagy, the type of a cast expression is
unqualified (see http://www.open-std.org/jtc1/sc22/wg14/www/docs/dr_423.htm):
__typeof ((__typeof (*(mem)) *(mem)) tmp;
Thus from spinlock perspective the variable tmp is of type int instead of
type volatile int. This patch adjusts those macros in include/atomic.h.
With this construct GCC >= 5 omits the extra stores and loads.
The atomic macros are replaced by the C11 like atomic macros and thus
the code is aligned to it. The pthread_spin_unlock implementation is now
using release memory order instead of sequentially consistent memory order.
The issue with passed volatile int pointers applies to the C11 like atomic
macros as well as the ones used before.
I've added a glibc_likely hint to the first atomic exchange in
pthread_spin_lock in order to return immediately to the caller if the lock is
free. Without the hint, there is an additional jump if the lock is free.
I've added the atomic_spin_nop macro within the loop of plain reads.
The plain reads are also realized by C11 like atomic_load_relaxed macro.
The new define ATOMIC_EXCHANGE_USES_CAS determines if the first try to acquire
the spinlock in pthread_spin_lock or pthread_spin_trylock is an exchange
or a CAS. This is defined in atomic-machine.h for all architectures.
The define SPIN_LOCK_READS_BETWEEN_CMPXCHG is now removed.
There is no technical reason for throwing in a CAS every now and then,
and so far we have no evidence that it can improve performance.
If that would be the case, we have to adjust other spin-waiting loops
elsewhere, too! Using a CAS loop without plain reads is not a good idea
on many targets and wasn't used by one. Thus there is now no option to
do so.
Architectures are now using the generic spinlock automatically if they
do not provide an own implementation. Thus the pthread_spin_lock.c files
in sysdeps folder are deleted.
ChangeLog:
* NEWS: Mention new spinlock implementation.
* include/atomic.h:
(__atomic_val_bysize): Cast type to omit volatile qualifier.
(atomic_exchange_acq): Likewise.
(atomic_load_relaxed): Likewise.
(ATOMIC_EXCHANGE_USES_CAS): Check definition.
* nptl/pthread_spin_init.c (pthread_spin_init):
Use atomic_store_relaxed.
* nptl/pthread_spin_lock.c (pthread_spin_lock):
Use C11-like atomic macros.
* nptl/pthread_spin_trylock.c (pthread_spin_trylock):
Likewise.
* nptl/pthread_spin_unlock.c (pthread_spin_unlock):
Use atomic_store_release.
* sysdeps/aarch64/nptl/pthread_spin_lock.c: Delete File.
* sysdeps/arm/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/hppa/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/m68k/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/microblaze/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/mips/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/nios2/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/aarch64/atomic-machine.h (ATOMIC_EXCHANGE_USES_CAS): Define.
* sysdeps/alpha/atomic-machine.h: Likewise.
* sysdeps/arm/atomic-machine.h: Likewise.
* sysdeps/i386/atomic-machine.h: Likewise.
* sysdeps/ia64/atomic-machine.h: Likewise.
* sysdeps/m68k/coldfire/atomic-machine.h: Likewise.
* sysdeps/m68k/m680x0/m68020/atomic-machine.h: Likewise.
* sysdeps/microblaze/atomic-machine.h: Likewise.
* sysdeps/mips/atomic-machine.h: Likewise.
* sysdeps/powerpc/powerpc32/atomic-machine.h: Likewise.
* sysdeps/powerpc/powerpc64/atomic-machine.h: Likewise.
* sysdeps/s390/atomic-machine.h: Likewise.
* sysdeps/sparc/sparc32/atomic-machine.h: Likewise.
* sysdeps/sparc/sparc32/sparcv9/atomic-machine.h: Likewise.
* sysdeps/sparc/sparc64/atomic-machine.h: Likewise.
* sysdeps/tile/tilegx/atomic-machine.h: Likewise.
* sysdeps/tile/tilepro/atomic-machine.h: Likewise.
* sysdeps/unix/sysv/linux/hppa/atomic-machine.h: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/atomic-machine.h: Likewise.
* sysdeps/unix/sysv/linux/nios2/atomic-machine.h: Likewise.
* sysdeps/unix/sysv/linux/sh/atomic-machine.h: Likewise.
* sysdeps/x86_64/atomic-machine.h: Likewise.
This patch removes all the replicated pthread definition accross the
architectures and consolidates it on shared headers. The new
organization is as follow:
* Architecture specific definition (such as pthread types sizes) are
place in the new pthreadtypes-arch.h header in arch specific path.
* All shared structure definition are moved to a common NPTL header
at sysdeps/nptl/bits/pthreadtypes.h (with now includes the arch
specific one for internal definitions).
* Also, for C11 future thread support, both mutex and condition
definition are placed in a common header at
sysdeps/nptl/bits/thread-shared-types.h.
It is also a refactor patch without expected functional changes.
Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu,
arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu,
m68k-linux-gnu, microblaze-linux-gnu, mips{64}-linux-gnu, nios2-linux-gnu,
powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu,
tile{pro,gx}-linux-gnu, and x86_64-linux-gnu).
* posix/Makefile (headers): Add pthreadtypes-arch.h and
thread-shared-types.h.
* sysdeps/aarch64/nptl/bits/pthreadtypes-arch.h: New file: arch
specific thread definition.
* sysdeps/alpha/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/arm/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/hppa/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/ia64/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/m68k/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/microblaze/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/mips/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/nios2/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/powerpc/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/s390/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/sh/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/sparc/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/tile/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/x86/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/nptl/bits/thread-shared-types.h: New file: shared
thread definition between POSIX and C11.
* sysdeps/aarch64/nptl/bits/pthreadtypes.h.: Remove file.
* sysdeps/alpha/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/arm/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/hppa/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/m68k/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/microblaze/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/mips/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/nios2/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/ia64/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/powerpc/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/s390/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/sh/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/sparc/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/tile/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/x86/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/nptl/bits/pthreadtypes.h: New file: common thread
definitions shared across all architectures.
cppflags-iterator.mk no longer has anything to do with CPPFLAGS; all
it does is set libof-$(foo) for a list of files. extra-modules.mk
does the same thing, but with a different input variable, and doesn't
let the caller control the module. Therefore, this patch gives
cppflags-iterator.mk a better name, removes extra-modules.mk, and
updates all uses of both.
* extra-modules.mk: Delete file.
* cppflags-iterator.mk: Rename to ...
* libof-iterator.mk: ...this. Adjust comments.
* Makerules, extra-lib.mk, benchtests/Makefile, elf/Makefile
* elf/rtld-Rules, iconv/Makefile, locale/Makefile, malloc/Makefile
* nscd/Makefile, sunrpc/Makefile, sysdeps/s390/Makefile:
Use libof-iterator.mk instead of cppflags-iterator.mk or
extra-modules.mk.
* benchtests/strcoll-inputs/filelist#en_US.UTF-8: Remove
extra-modules.mk and cppflags-iterator.mk, add libof-iterator.mk.
The utf8-utf32-z9.c iconv module is using ifunc and thus the ifunc part should
be in multiarch folder. Otherwise ifunc is used even if you configure
with --disable-multi-arch.
This patch moves the ifunc resolvers to the new file
sysdeps/s390/multiarch/utf8-utf32-z9.c. The resolvers are now implemented
with s390_libc_ifunc_expr macro instead of using gcc attribute ifunc directly.
The ifunc versions are implemented in sysdeps/s390/utf8-utf32-z9.c.
Each version is only implemented if needed or supported. Therefore there is
a block at beginning of the file which selects the versions which should be
defined depending on support for multiarch, vector-support and used minimum
architecture level. This block defines HAVE_[FROM|TO]_[C|CU|VX] to 1 or 0.
The code below is rearranged and surrounded
by #if HAVE_[FROM|TO]_[C|CU|VX] == 1. There is no functional change.
The cu instructions are z9 zarch instructions. As the major distros are
already using the newer z196 as architecture level set, those instructions
can be used as fallback version instead of the c-code. This behaviour is
decided at compile time via HAVE_S390_MIN_Z196_ZARCH_ASM_SUPPORT.
ChangeLog:
* sysdeps/s390/multiarch/utf8-utf32-z9.c: New File.
* sysdeps/s390/utf8-utf32-z9.c: Move ifunc resolvers to multiarch
folder and define ifunc versions depending on HAVE_[FROM|TO]_[C|CU|VX].
(HAVE_FROM_C, HAVE_FROM_CU, HAVE_FROM_VX, HAVE_TO_C, HAVE_TO_VX,
FROM_LOOP_DEFAULT, FROM_LOOP_C, FROM_LOOP_CU, FROM_LOOP_VX,
TO_LOOP_DEFAULT, TO_LOOP_C, TO_LOOP_VX): New Define.
The utf16-utf32-z9.c iconv module is using ifunc and thus the ifunc part should
be in multiarch folder. Otherwise ifunc is used even if you configure
with --disable-multi-arch.
This patch moves the ifunc resolvers to the new file
sysdeps/s390/multiarch/utf16-utf32-z9.c. The resolvers are now implemented
with s390_libc_ifunc_expr macro instead of using gcc attribute ifunc directly.
The ifunc versions are implemented in sysdeps/s390/utf16-utf32-z9.c.
Each version is only implemented if needed or supported. Therefore there is
a block at beginning of the file which selects the versions which should be
defined depending on support for multiarch, vector-support and used minimum
architecture level. This block defines HAVE_[FROM|TO]_[C|VX] to 1 or 0.
The code below is rearranged and surrounded
by #if HAVE_[FROM|TO]_[C|VX] == 1. There is no functional change.
ChangeLog:
* sysdeps/s390/multiarch/utf16-utf32-z9.c: New File.
* sysdeps/s390/utf16-utf32-z9.c: Move ifunc resolvers to multiarch
folder and define ifunc versions depending on HAVE_[FROM|TO]_[C|VX].
(HAVE_FROM_C, HAVE_FROM_VX, HAVE_TO_C, HAVE_TO_VX, FROM_LOOP_DEFAULT,
FROM_LOOP_C, FROM_LOOP_VX, TO_LOOP_DEFAULT, TO_LOOP_C, TO_LOOP_VX):
New Define.
The utf8-utf16-z9.c iconv module is using ifunc and thus the ifunc part should
be in multiarch folder. Otherwise ifunc is used even if you configure
with --disable-multi-arch.
This patch moves the ifunc resolvers to the new file
sysdeps/s390/multiarch/utf8-utf16-z9.c. The resolvers are now implemented
with s390_libc_ifunc_expr macro instead of using gcc attribute ifunc directly.
The ifunc versions are implemented in sysdeps/s390/utf8-utf16-z9.c.
Each version is only implemented if needed or supported. Therefore there is
a block at beginning of the file which selects the versions which should be
defined depending on support for multiarch, vector-support and used minimum
architecture level. This block defines HAVE_[FROM|TO]_[C|CU|VX] to 1 or 0.
The code below is rearranged and surrounded
by #if HAVE_[FROM|TO]_[C|CU|VX] == 1. There is no functional change.
The cu instructions are z9 zarch instructions. As the major distros are
already using the newer z196 as architecture level set, those instructions
can be used as fallback version instead of the c-code. This behaviour is
decided at compile time via HAVE_S390_MIN_Z196_ZARCH_ASM_SUPPORT.
ChangeLog:
* sysdeps/s390/multiarch/utf8-utf16-z9.c: New File.
* sysdeps/s390/utf8-utf16-z9.c: Move ifunc resolvers to multiarch
folder and define ifunc versions depending on HAVE_[FROM|TO]_[C|CU|VX].
(HAVE_FROM_C, HAVE_FROM_CU, HAVE_FROM_VX, HAVE_TO_C, HAVE_TO_VX,
FROM_LOOP_DEFAULT, FROM_LOOP_C, FROM_LOOP_CU, FROM_LOOP_VX,
TO_LOOP_DEFAULT, TO_LOOP_C, TO_LOOP_VX): New Define.
This patch adds s390_libc_ifunc_expr macro which uses the __ifunc base macro
in include/libc-symbols.h and lets the user define a generic expression to
choose the correct ifunc variant. Furthermore as the base macro is used,
the ifunc resolver functions are now also using inhibit_stack_protector.
S390 needs its own version due to the hwcap argument of the ifunc resolver.
This new macro is now used in iconv code in 8bit-generic.c instead of using
gcc attribute ifunc directly.
ChangeLog:
* sysdeps/s390/multiarch/ifunc-resolve.h
(s390_libc_ifunc_expr_init, s390_libc_ifunc_expr): New Define.
* sysdeps/s390/multiarch/8bit-generic.c
(__to_generic, __from_generic): Use s390_libc_ifunc_expr to
define ifunc resolvers.
As noted in [1], divdi3 object is only exported in a handful ABIs
(i386, m68k, powerpc32, s390-32, and ia64), however it is built
for all current architectures regardless.
This patch refact the make rules for this object to so only the
aforementioned architectures that actually require it builds it.
Also, to avoid internal PLT calls to the exported symbol from the
module, glibc uses an internal header (symbol-hacks.h) which is
unrequired (and in fact breaks the build for architectures that
intend to get symbol definitions from libgcc.a). The patch also
changes it to create its own header (divdi3-symbol-hacks.h) and
adjust the architectures that require it accordingly.
I checked the build/check (with run-built-tests=no) on the
following architectures (which I think must cover all supported
ABI/builds) using GCC 6.3:
aarch64-linux-gnu
alpha-linux-gnu
arm-linux-gnueabihf
hppa-linux-gnu
ia64-linux-gnu
m68k-linux-gnu
microblaze-linux-gnu
mips64-n32-linux-gnu
mips-linux-gnu
mips64-linux-gnu
nios2-linux-gnu
powerpc-linux-gnu
powerpc-linux-gnu-power4
powerpc64-linux-gnu
powerpc64le-linux-gnu
s390x-linux-gnu
s390-linux-gnu
sh4-linux-gnu
sh4-linux-gnu-soft
sparc64-linux-gnu
sparcv9-linux-gnu
tilegx-linux-gnu
tilegx-linux-gnu-32
tilepro-linux-gnu
x86_64-linux-gnu
x86_64-linux-gnu-x32
i686-linux-gnu
I only saw one regression on sparcv9-linux-gnu (extra PLT call to
.udiv) which I address in next patch in the set. It also correctly
build SH with GCC 7.0.1 (without any regression from c89721e25d).
[1] https://sourceware.org/ml/libc-alpha/2017-03/msg00243.html
* sysdeps/i386/symbol-hacks.h: New file.
* sysdeps/m68k/symbol-hacks.h: New file.
* sysdeps/powerpc/powerpc32/symbol-hacks.h: New file.
* sysdeps/s390/s390-32/symbol-hacks.h: New file.
* sysdeps/unix/sysv/linux/i386/Makefile
[$(subdir) = csu] (sysdep_routines): New rule: divdi3 object.
[$(subdir) = csu] (sysdep-only-routines): Likewise.
[$(subdir) = csu] (CFLAGS-divdi3.c): Likewise.
* sysdeps/unix/sysv/linux/m68k/Makefile
[$(subdir) = csu] (sysdep_routines): Likewise.
[$(subdir) = csu] (sysdep-only-routines): Likewise.
[$(subdir) = csu] (CFLAGS-divdi3.c): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/Makefile
[$(subdir) = csu] (sysdep_routines): Likewise.
[$(subdir) = csu] (sysdep-only-routines): Likewise.
[$(subdir) = csu] (CFLAGS-divdi3.c): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/Makefile
[$(subdir) = csu] (sysdep_routines): Likewise.
[$(subdir) = csu] (sysdep-only-routines): Likewise.
[$(subdir) = csu] (CFLAGS-divdi3.c): Likewise.
* sysdeps/wordsize-32/Makefile: Remove file.
* sysdeps/wordsize-32/symbol-hacks.h: Definitions move to ...
* sysdeps/wordsize-32/divdi3-symbol-hacks.h: ... here.
This patch also clobbers r14 in TLS_LD, TLS_GD macros on 31bit.
This ensures that r14 isn't used to save and restore r12 while
r14 is clobbered by the bas-instruction.
As note:
r12 can't be added to clobber list as gcc would fail with:
error: PIC register clobbered by ‘12’ in ‘asm’
For 64bit this fix was already done in 2004 in the
commit b80af23ac6.
ChangeLog:
* sysdeps/s390/s390-32/tls-macros.h (TLS_LD, TLS_GD):
Clobber also r14.
I've used gmp 6.1.2, mpfr 3.1.5 and upstream mpc with fix in mpc_atan
(https://scm.gforge.inria.fr/anonscm/gitweb?p=mpc/mpc.git;a=commit;h=958aac9b15a659d6fb5edcb11778123f8a35b14f)
to build gen-auto-libm-tests and regenerated catan / catanh out files.
Regenerated ULPs for s390 from scratch. Now the catan / catanh tests
are passing.
ChangeLog:
* math/auto-libm-test-out-catan: Regenerated.
* math/auto-libm-test-out-catanh: Likewise.
* sysdeps/s390/fpu/libm-test-ulps: Likewise.
This patch activates C11 atomic builtins by defining
USE_ATOMIC_COMPILER_BUILTINS to 1.
Note:
E.g. in nptl/pthread_key_delete.c if compiled with GCCs 6 and before,
an extra stack-frame is generated and the old value is stored on stack
before cs instruction but it never loads this value from stack.
An unreleased GCC 7 omit those stack operations.
E.g. in nptl/pthread_once.c the condition code of cs instruction is
evaluated by a sequence of ipm, sra, compare and jump instructions instead
of one conditional jump instruction. This also occurs with an unreleased
GCC 7.
These shortcomings does not really hurt. Nevertheless, the gcc guys are
investigating those ones and plan to fix them before GCC 7 release.
The atomic_fetch_abc_def C11 builtins are now using load-and-abc instructions
on z196 zarch and higher cpus instead of a loop with compare-and-swap
instruction.
Some of the non-C11 atomic macros from include/atomic.h are now implemented
with help of the C11 atomic builtins. The other non-C11 atomic macros
are using the macros defined here.
ChangeLog:
* sysdeps/s390/atomic-machine.h
(USE_ATOMIC_COMPILER_BUILTINS): Define to 1.
(__arch_compare_and_exchange_val_8_acq,
__arch_compare_and_exchange_val_16_acq,
__arch_compare_and_exchange_val_32_acq,
__arch_compare_and_exchange_val_64_acq):
Delete macro.
(atomic_compare_and_exchange_val_acq,
atomic_compare_and_exchange_val_rel,
atomic_compare_and_exchange_bool_acq,
catomic_compare_and_exchange_bool_acq,
atomic_exchange_acq, atomic_exchange_rel,
atomic_exchange_and_add_acq,
atomic_exchange_and_add_rel,
catomic_exchange_and_add, atomic_or_val,
atomic_or, catomic_or, atomic_bit_test_set,
atomic_and_val, atomic_and, catomic_and):
Define macros with help of C11 atomic builtins.
This is a new implementation for condition variables, required
after http://austingroupbugs.net/view.php?id=609 to fix bug 13165. In
essence, we need to be stricter in which waiters a signal or broadcast
is required to wake up; this couldn't be solved using the old algorithm.
ISO C++ made a similar clarification, so this also fixes a bug in
current libstdc++, for example.
We can't use the old algorithm anymore because futexes do not guarantee
to wake in FIFO order. Thus, when we wake, we can't simply let any
waiter grab a signal, but we need to ensure that one of the waiters
happening before the signal is woken up. This is something the previous
algorithm violated (see bug 13165).
There's another issue specific to condvars: ABA issues on the underlying
futexes. Unlike mutexes that have just three states, or semaphores that
have no tokens or a limited number of them, the state of a condvar is
the *order* of the waiters. A waiter on a semaphore can grab a token
whenever one is available; a condvar waiter must only consume a signal
if it is eligible to do so as determined by the relative order of the
waiter and the signal.
Therefore, this new algorithm maintains two groups of waiters: Those
eligible to consume signals (G1), and those that have to wait until
previous waiters have consumed signals (G2). Once G1 is empty, G2
becomes the new G1. 64b counters are used to avoid ABA issues.
This condvar doesn't yet use a requeue optimization (ie, on a broadcast,
waking just one thread and requeueing all others on the futex of the
mutex supplied by the program). I don't think doing the requeue is
necessarily the right approach (but I haven't done real measurements
yet):
* If a program expects to wake many threads at the same time and make
that scalable, a condvar isn't great anyway because of how it requires
waiters to operate mutually exclusive (due to the mutex usage). Thus, a
thundering herd problem is a scalability problem with or without the
optimization. Using something like a semaphore might be more
appropriate in such a case.
* The scalability problem is actually at the mutex side; the condvar
could help (and it tries to with the requeue optimization), but it
should be the mutex who decides how that is done, and whether it is done
at all.
* Forcing all but one waiter into the kernel-side wait queue of the
mutex prevents/avoids the use of lock elision on the mutex. Thus, it
prevents the only cure against the underlying scalability problem
inherent to condvars.
* If condvars use short critical sections (ie, hold the mutex just to
check a binary flag or such), which they should do ideally, then forcing
all those waiter to proceed serially with kernel-based hand-off (ie,
futex ops in the mutex' contended state, via the futex wait queues) will
be less efficient than just letting a scalable mutex implementation take
care of it. Our current mutex impl doesn't employ spinning at all, but
if critical sections are short, spinning can be much better.
* Doing the requeue stuff requires all waiters to always drive the mutex
into the contended state. This leads to each waiter having to call
futex_wake after lock release, even if this wouldn't be necessary.
[BZ #13165]
* nptl/pthread_cond_broadcast.c (__pthread_cond_broadcast): Rewrite to
use new algorithm.
* nptl/pthread_cond_destroy.c (__pthread_cond_destroy): Likewise.
* nptl/pthread_cond_init.c (__pthread_cond_init): Likewise.
* nptl/pthread_cond_signal.c (__pthread_cond_signal): Likewise.
* nptl/pthread_cond_wait.c (__pthread_cond_wait): Likewise.
(__pthread_cond_timedwait): Move here from pthread_cond_timedwait.c.
(__condvar_confirm_wakeup, __condvar_cancel_waiting,
__condvar_cleanup_waiting, __condvar_dec_grefs,
__pthread_cond_wait_common): New.
(__condvar_cleanup): Remove.
* npt/pthread_condattr_getclock.c (pthread_condattr_getclock): Adapt.
* npt/pthread_condattr_setclock.c (pthread_condattr_setclock):
Likewise.
* npt/pthread_condattr_getpshared.c (pthread_condattr_getpshared):
Likewise.
* npt/pthread_condattr_init.c (pthread_condattr_init): Likewise.
* nptl/tst-cond1.c: Add comment.
* nptl/tst-cond20.c (do_test): Adapt.
* nptl/tst-cond22.c (do_test): Likewise.
* sysdeps/aarch64/nptl/bits/pthreadtypes.h (pthread_cond_t): Adapt
structure.
* sysdeps/arm/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/ia64/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/m68k/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/microblaze/nptl/bits/pthreadtypes.h (pthread_cond_t):
Likewise.
* sysdeps/mips/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/nios2/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/s390/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/sh/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/tile/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/pthreadtypes.h (pthread_cond_t):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h (pthread_cond_t):
Likewise.
* sysdeps/x86/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/nptl/internaltypes.h (COND_NWAITERS_SHIFT): Remove.
(COND_CLOCK_BITS): Adapt.
* sysdeps/nptl/pthread.h (PTHREAD_COND_INITIALIZER): Adapt.
* nptl/pthreadP.h (__PTHREAD_COND_CLOCK_MONOTONIC_MASK,
__PTHREAD_COND_SHARED_MASK): New.
* nptl/nptl-printers.py (CLOCK_IDS): Remove.
(ConditionVariablePrinter, ConditionVariableAttributesPrinter): Adapt.
* nptl/nptl_lock_constants.pysym: Adapt.
* nptl/test-cond-printers.py: Adapt.
* sysdeps/unix/sysv/linux/hppa/internaltypes.h (cond_compat_clear,
cond_compat_check_and_clear): Adapt.
* sysdeps/unix/sysv/linux/hppa/pthread_cond_timedwait.c: Remove file ...
* sysdeps/unix/sysv/linux/hppa/pthread_cond_wait.c
(__pthread_cond_timedwait): ... and move here.
* nptl/DESIGN-condvar.txt: Remove file.
* nptl/lowlevelcond.sym: Likewise.
* nptl/pthread_cond_timedwait.c: Likewise.
* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_broadcast.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_signal.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_timedwait.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_wait.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i586/pthread_cond_broadcast.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i586/pthread_cond_signal.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i586/pthread_cond_timedwait.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i586/pthread_cond_wait.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i686/pthread_cond_broadcast.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i686/pthread_cond_signal.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i686/pthread_cond_timedwait.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i686/pthread_cond_wait.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/pthread_cond_broadcast.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/pthread_cond_signal.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S: Likewise.
Information about whether the ABI of long double is the same as that
of double is split between bits/mathdef.h and bits/wordsize.h.
When the ABIs are the same, bits/mathdef.h defines
__NO_LONG_DOUBLE_MATH. In addition, in the case where the same glibc
binary supports both -mlong-double-64 and -mlong-double-128,
bits/wordsize.h defines __LONG_DOUBLE_MATH_OPTIONAL, along with
__NO_LONG_DOUBLE_MATH if this particular compilation is with
-mlong-double-64.
As part of the refactoring I proposed in
<https://sourceware.org/ml/libc-alpha/2016-11/msg00745.html>, this
patch puts all that information in a single header,
bits/long-double.h. It is included from sys/cdefs.h alongside the
include of bits/wordsize.h, so other headers generally do not need to
include bits/long-double.h directly.
Previously, various bits/mathdef.h headers and bits/wordsize.h headers
had this long double information (including implicitly in some
bits/mathdef.h headers through not having the defines present in the
default version). After the patch, it's all in six bits/long-double.h
headers. Furthermore, most of those new headers are not
architecture-specific. Architectures with optional long double all
use the ldbl-opt sysdeps directory, either in the order (ldbl-64-128,
ldbl-opt, ldbl-128) or (ldbl-128ibm, ldbl-opt). Thus a generic header
for the case where long double = double, and headers in ldbl-128,
ldbl-96 and ldbl-opt, suffices to cover every architecture except for
cases where long double properties vary between different ABIs sharing
a set of installed headers; fortunately all the ldbl-opt cases share a
single compiler-predefined macro __LONG_DOUBLE_128__ that can be used
to tell whether this compilation is -mlong-double-64 or
-mlong-double-128.
The two cases where a set of headers is shared between ABIs with
different long double properties, MIPS (o32 has long double = double,
other ABIs use ldbl-128) and SPARC (32-bit has optional long double,
64-bit has required long double), need their own bits/long-double.h
headers.
As with bits/wordsize.h, multiple-include protection for this header
is generally implicit through the include guards on sys/cdefs.h, and
multiple inclusion is harmless in any case. There is one subtlety:
the header must not define __LONG_DOUBLE_MATH_OPTIONAL if
__NO_LONG_DOUBLE_MATH was defined before its inclusion, because doing
so breaks how sysdeps/ieee754/ldbl-opt/nldbl-compat.h defines
__NO_LONG_DOUBLE_MATH itself before including system headers. Subject
to keeping that working, it would be reasonable to move these macros
from defined/undefined #ifdef to always-defined 1/0 #if semantics, but
this patch does not attempt to do so, just rearranges where the macros
are defined.
After this patch, the only use of bits/mathdef.h is the alpha one for
modifying complex function ABIs for old GCC. Thus, all versions of
the header other than the default and alpha versions are removed, as
is the include from math.h.
Tested for x86_64 and x86. Also did compilation-only testing with
build-many-glibcs.py.
* bits/long-double.h: New file.
* sysdeps/ieee754/ldbl-128/bits/long-double.h: Likewise.
* sysdeps/ieee754/ldbl-96/bits/long-double.h: Likewise.
* sysdeps/ieee754/ldbl-opt/bits/long-double.h: Likewise.
* sysdeps/mips/bits/long-double.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/long-double.h: Likewise.
* math/Makefile (headers): Add bits/long-double.h.
* misc/sys/cdefs.h: Include <bits/long-double.h>.
* stdlib/strtold.c: Include <bits/long-double.h> instead of
<bits/wordsize.h>.
* bits/mathdef.h [!_COMPLEX_H]: Do not allow inclusion.
[!__NO_LONG_DOUBLE_MATH]: Remove conditional code.
* math/math.h: Do not include <bits/mathdef.h>.
* sysdeps/aarch64/bits/mathdef.h: Remove file.
* sysdeps/alpha/bits/mathdef.h [!_COMPLEX_H]: Do not allow
inclusion.
* sysdeps/ia64/bits/mathdef.h: Remove file.
* sysdeps/m68k/m680x0/bits/mathdef.h: Likewise.
* sysdeps/mips/bits/mathdef.h: Likewise.
* sysdeps/powerpc/bits/mathdef.h: Likewise.
* sysdeps/s390/bits/mathdef.h: Likewise.
* sysdeps/sparc/bits/mathdef.h: Likewise.
* sysdeps/x86/bits/mathdef.h: Likewise.
* sysdeps/s390/s390-32/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]: Remove
conditional code.
* sysdeps/s390/s390-64/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
Likewise.
Continuing the refactoring of bits/mathdef.h, this patch stops it
defining FP_ILOGB0 and FP_ILOGBNAN, moving the required information to
a new header bits/fp-logb.h.
There are only two possible values of each of those macros permitted
by ISO C. TS 18661-1 adds corresponding macros for llogb, and their
values are required to correspond to those of the ilogb macros in the
obvious way. Thus two boolean values - for which the same choices are
correct for most architectures - suffice to determine the value of all
these macros, and by defining macros for those boolean values in
bits/fp-logb.h we can then define the public FP_* macros in math.h and
avoid the present duplication of the associated feature test macro
logic.
This patch duly moves to bits/fp-logb.h defining __FP_LOGB0_IS_MIN and
__FP_LOGBNAN_IS_MIN. Default definitions of those to 0 are correct
for both architectures, while ia64, m68k and x86 get their own
versions of bits/fp-logb.h to reflect their use of values different
from the defaults.
The patch renders many copies of bits/mathdef.h trivial (needed only
to avoid the default __NO_LONG_DOUBLE_MATH). I'll revise
<https://sourceware.org/ml/libc-alpha/2016-11/msg00865.html>
accordingly so that it removes all bits/mathdef.h headers except the
default one and the alpha one, and arranges for the header to be
included only by complex.h as the only remaining use at that point
will be for the alpha ABI issues there.
Tested for x86_64 and x86. Also did compile-only testing with
build-many-glibcs.py (using glibc sources from before the commit that
introduced many build failures with undefined __GI___sigsetjmp).
* bits/fp-logb.h: New file.
* sysdeps/ia64/bits/fp-logb.h: Likewise.
* sysdeps/m68k/m680x0/bits/fp-logb.h: Likewise.
* sysdeps/x86/bits/fp-logb.h: Likewise.
* math/Makefile (headers): Add bits/fp-logb.h.
* math/math.h: Include <bits/fp-logb.h>.
[__USE_ISOC99] (FP_ILOGB0): Define based on __FP_LOGB0_IS_MIN.
[__USE_ISOC99] (FP_ILOGBNAN): Define based on __FP_LOGBNAN_IS_MIN.
* bits/mathdef.h (FP_ILOGB0): Remove.
(FP_ILOGBNAN): Likewise.
* sysdeps/aarch64/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/alpha/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/ia64/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/m68k/m680x0/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/mips/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/powerpc/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/s390/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/sparc/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/x86/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
This patch remove the PID cache and usage in current GLIBC code. Current
usage is mainly used a performance optimization to avoid the syscall,
however it adds some issues:
- The exposed clone syscall will try to set pid/tid to make the new
thread somewhat compatible with current GLIBC assumptions. This cause
a set of issue with new workloads and usecases (such as BZ#17214 and
[1]) as well for new internal usage of clone to optimize other algorithms
(such as clone plus CLONE_VM for posix_spawn, BZ#19957).
- The caching complexity also added some bugs in the past [2] [3] and
requires more effort of each port to handle such requirements (for
both clone and vfork implementation).
- Caching performance gain in mainly on getpid and some specific
code paths. The getpid performance leverage is questionable [4],
either by the idea of getpid being a hotspot as for the getpid
implementation itself (if it is indeed a justifiable hotspot a
vDSO symbol could let to a much more simpler solution).
Other usage is mainly for non usual code paths, such as pthread
cancellation signal and handling.
For thread creation (on stack allocation) the code simplification in fact
adds some performance gain due the no need of transverse the stack cache
and invalidate each element pid.
Other thread usages will require a direct getpid syscall, such as
cancellation/setxid signal, thread cancellation, thread fail path (at
create_thread), and thread signal (pthread_kill and pthread_sigqueue).
However these are hardly usual hotspots and I think adding a syscall is
justifiable.
It also simplifies both the clone and vfork arch-specific implementation.
And by review each fork implementation there are some discrepancies that
this patch also solves:
- microblaze clone/vfork does not set/reset the pid/tid field
- hppa uses the default vfork implementation that fallback to fork.
Since vfork is deprecated I do not think we should bother with it.
The patch also removes the TID caching in clone. My understanding for
such semantic is try provide some pthread usage after a user program
issue clone directly (as done by thread creation with CLONE_PARENT_SETTID
and pthread tid member). However, as stated before in multiple discussions
threads, GLIBC provides clone syscalls without further supporting all this
semantics.
I ran a full make check on x86_64, x32, i686, armhf, aarch64, and powerpc64le.
For sparc32, sparc64, and mips I ran the basic fork and vfork tests from
posix/ folder (on a qemu system). So it would require further testing
on alpha, hppa, ia64, m68k, nios2, s390, sh, and tile (I excluded microblaze
because it is already implementing the patch semantic regarding clone/vfork).
[1] https://codereview.chromium.org/800183004/
[2] https://sourceware.org/ml/libc-alpha/2006-07/msg00123.html
[3] https://sourceware.org/bugzilla/show_bug.cgi?id=15368
[4] http://yarchive.net/comp/linux/getpid_caching.html
* sysdeps/nptl/fork.c (__libc_fork): Remove pid cache setting.
* nptl/allocatestack.c (allocate_stack): Likewise.
(__reclaim_stacks): Likewise.
(setxid_signal_thread): Obtain pid through syscall.
* nptl/nptl-init.c (sigcancel_handler): Likewise.
(sighandle_setxid): Likewise.
* nptl/pthread_cancel.c (pthread_cancel): Likewise.
* sysdeps/unix/sysv/linux/pthread_kill.c (__pthread_kill): Likewise.
* sysdeps/unix/sysv/linux/pthread_sigqueue.c (pthread_sigqueue):
Likewise.
* sysdeps/unix/sysv/linux/createthread.c (create_thread): Likewise.
* sysdeps/unix/sysv/linux/getpid.c: Remove file.
* nptl/descr.h (struct pthread): Change comment about pid value.
* nptl/pthread_getattr_np.c (pthread_getattr_np): Remove thread
pid assert.
* sysdeps/unix/sysv/linux/pthread-pids.h (__pthread_initialize_pids):
Do not set pid value.
* nptl_db/td_ta_thr_iter.c (iterate_thread_list): Remove thread
pid cache check.
* nptl_db/td_thr_validate.c (td_thr_validate): Likewise.
* sysdeps/aarch64/nptl/tcb-offsets.sym: Remove pid offset.
* sysdeps/alpha/nptl/tcb-offsets.sym: Likewise.
* sysdeps/arm/nptl/tcb-offsets.sym: Likewise.
* sysdeps/hppa/nptl/tcb-offsets.sym: Likewise.
* sysdeps/i386/nptl/tcb-offsets.sym: Likewise.
* sysdeps/ia64/nptl/tcb-offsets.sym: Likewise.
* sysdeps/m68k/nptl/tcb-offsets.sym: Likewise.
* sysdeps/microblaze/nptl/tcb-offsets.sym: Likewise.
* sysdeps/mips/nptl/tcb-offsets.sym: Likewise.
* sysdeps/nios2/nptl/tcb-offsets.sym: Likewise.
* sysdeps/powerpc/nptl/tcb-offsets.sym: Likewise.
* sysdeps/s390/nptl/tcb-offsets.sym: Likewise.
* sysdeps/sh/nptl/tcb-offsets.sym: Likewise.
* sysdeps/sparc/nptl/tcb-offsets.sym: Likewise.
* sysdeps/tile/nptl/tcb-offsets.sym: Likewise.
* sysdeps/x86_64/nptl/tcb-offsets.sym: Likewise.
* sysdeps/unix/sysv/linux/aarch64/clone.S: Remove pid and tid caching.
* sysdeps/unix/sysv/linux/alpha/clone.S: Likewise.
* sysdeps/unix/sysv/linux/arm/clone.S: Likewise.
* sysdeps/unix/sysv/linux/hppa/clone.S: Likewise.
* sysdeps/unix/sysv/linux/i386/clone.S: Likewise.
* sysdeps/unix/sysv/linux/ia64/clone2.S: Likewise.
* sysdeps/unix/sysv/linux/mips/clone.S: Likewise.
* sysdeps/unix/sysv/linux/nios2/clone.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/sh/clone.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/tile/clone.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/aarch64/vfork.S: Remove pid set and reset.
* sysdeps/unix/sysv/linux/alpha/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/arm/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/i386/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/ia64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/m68k/clone.S: Likewise.
* sysdeps/unix/sysv/linux/m68k/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/mips/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/nios2/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/sh/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/tile/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/tst-clone2.c (f): Remove direct pthread
struct access.
(clone_test): Remove function.
(do_test): Rewrite to take in consideration pid is not cached anymore.
At present, definitions of float_t and double_t are split among many
bits/mathdef.h headers.
For all but three architectures, these types are float and double.
Furthermore, if you assume __FLT_EVAL_METHOD__ to be defined, that
provides a more generic way of determining the correct values of these
typedefs. Defining these typedefs more generally based on
__FLT_EVAL_METHOD__ was previously proposed by Paul Eggert in
<https://sourceware.org/ml/libc-alpha/2012-02/msg00002.html>.
This patch refactors things in the way I proposed in
<https://sourceware.org/ml/libc-alpha/2016-11/msg00745.html>. A new
header bits/flt-eval-method.h defines a single macro,
__GLIBC_FLT_EVAL_METHOD, which is then used by math.h to define
float_t and double_t. The default is based on __FLT_EVAL_METHOD__
(although actually a default to 0 would have the same effect for
current ports, because ports where values other than 0 or 16 are
possible all have their own headers).
To avoid changing the existing semantics in any case, including for
compilers not defining __FLT_EVAL_METHOD__, architecture-specific
files are then added for m68k, s390, x86 which replicate the existing
semantics. At least with __FLT_EVAL_METHOD__ values possible with
GCC, there should be no change to the choices of float_t and double_t
for any supported configuration.
Architecture maintainer notes:
* m68k: sysdeps/m68k/m680x0/bits/flt-eval-method.h always defines
__GLIBC_FLT_EVAL_METHOD to 2 to replicate the existing logic. But
actually GCC defines __FLT_EVAL_METHOD__ to 0 if TARGET_68040. It
might make sense to make the header prefer to base things on
__FLT_EVAL_METHOD__ if defined, like the x86 version, and so make
the choices of these types more accurate (with a NEWS entry as for
the other changes to these types on particular architectures).
* s390: sysdeps/s390/bits/flt-eval-method.h always defines
__GLIBC_FLT_EVAL_METHOD to 1 to replicate the existing logic. As
previously discussed, it might make sense in coordination with GCC
to eliminate the historic mistake, avoid excess precision in the
-fexcess-precision=standard case and make the typedefs match (with a
NEWS entry, again).
Tested for x86-64 and x86. Also did compilation-only testing with
build-many-glibcs.py.
* bits/flt-eval-method.h: New file.
* sysdeps/m68k/m680x0/bits/flt-eval-method.h: Likewise.
* sysdeps/s390/bits/flt-eval-method.h: Likewise.
* sysdeps/x86/bits/flt-eval-method.h: Likewise.
* math/Makefile (headers): Add bits/flt-eval-method.h.
* math/math.h: Include <bits/flt-eval-method.h>.
[__USE_ISOC99] (float_t): Define based on __GLIBC_FLT_EVAL_METHOD.
[__USE_ISOC99] (double_t): Likewise.
* bits/mathdef.h (float_t): Remove.
(double_t): Likewise.
* sysdeps/aarch64/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/alpha/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/arm/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/hppa/fpu/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/ia64/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/m68k/m680x0/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/mips/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/powerpc/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/s390/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/sh/sh4/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/sparc/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/tile/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/x86/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
manual/libm-err-tab.pl hardcodes a list of names for particular
platforms (mapping from sysdeps directory name to friendly name for
the manual). This goes against the principle of keeping information
about individual platforms in their corresponding sysdeps directory,
and the list is also very out-of-date regarding supported platforms
and their corresponding sysdeps directories.
This patch fixes this by adding a libm-test-ulps-name file alongside
each libm-test-ulps file. The script then gets the friendly name from
that file, which is required to exist, so it no longer needs to allow
for the mapping being missing.
Tested for x86_64.
[BZ #14139]
* manual/libm-err-tab.pl (%pplatforms): Initialize to empty.
(find_files): Obtain platform name from libm-test-ulps-name and
store in %pplatforms.
(canonicalize_platform): Remove.
(print_platforms): Use $pplatforms directly.
(by_platforms): Do not allow for platforms missing from
%pplatforms.
* sysdeps/aarch64/libm-test-ulps-name: New file.
* sysdeps/alpha/fpu/libm-test-ulps-name: Likewise.
* sysdeps/arm/libm-test-ulps-name: Likewise.
* sysdeps/generic/libm-test-ulps-name: Likewise.
* sysdeps/hppa/fpu/libm-test-ulps-name: Likewise.
* sysdeps/i386/fpu/libm-test-ulps-name: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps-name: Likewise.
* sysdeps/ia64/fpu/libm-test-ulps-name: Likewise.
* sysdeps/m68k/coldfire/fpu/libm-test-ulps-name: Likewise.
* sysdeps/m68k/m680x0/fpu/libm-test-ulps-name: Likewise.
* sysdeps/microblaze/libm-test-ulps-name: Likewise.
* sysdeps/mips/mips32/libm-test-ulps-name: Likewise.
* sysdeps/mips/mips64/libm-test-ulps-name: Likewise.
* sysdeps/nios2/libm-test-ulps-name: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps-name: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps-name: Likewise.
* sysdeps/s390/fpu/libm-test-ulps-name: Likewise.
* sysdeps/sh/libm-test-ulps-name: Likewise.
* sysdeps/sparc/fpu/libm-test-ulps-name: Likewise.
* sysdeps/tile/libm-test-ulps-name: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps-name: Likewise.
As gcc is using unordered comparison instructions which do not
raise invalid exception if any operand is quiet NAN,
FIX_COMPARE_INVALID is defined to 1.
Thus iseqsig is calling feraiseexcept as workaround.
This patch adjusts the s390 specific ifunc helper macros in ifunc-resolve.h to
use the common __ifunc macro, which uses gcc attribute ifunc to get rid of the
false debuginfo. Therefore the redirection construct is applied where needed.
Perhaps in future we can switch some of the internal symbols __GI_* from the
fallback variant to the ifunc function. But this change is not
straightforward due to a segmentation fault while linking libc.so with older
binutils on s390.
ChangeLog:
[BZ #20478]
* sysdeps/s390/multiarch/ifunc-resolve.h
(s390_vx_libc_ifunc2, s390_libc_ifunc): Use __ifunc from libc-symbols.h
to create ifunc symbols.
(s390_vx_libc_ifunc_init, s390_vx_libc_ifunc_redirected
, s390_vx_libc_ifunc2_redirected, s390_libc_ifunc_init): New define.
* sysdeps/s390/multiarch/memchr.c: Redirect ifunced function in header
for using it as type for ifunc function.
* sysdeps/s390/multiarch/mempcpy.c: Likewise.
* sysdeps/s390/multiarch/rawmemchr.c: Likewise.
* sysdeps/s390/multiarch/stpcpy.c: Likewise.
* sysdeps/s390/multiarch/stpncpy.c: Likewise.
* sysdeps/s390/multiarch/strcat.c: Likewise.
* sysdeps/s390/multiarch/strchr.c: Likewise.
* sysdeps/s390/multiarch/strcmp.c: Likewise.
* sysdeps/s390/multiarch/strcpy.c: Likewise.
* sysdeps/s390/multiarch/strcspn.c: Likewise.
* sysdeps/s390/multiarch/strlen.c: Likewise.
* sysdeps/s390/multiarch/strncmp.c: Likewise.
* sysdeps/s390/multiarch/strncpy.c: Likewise.
* sysdeps/s390/multiarch/strnlen.c: Likewise.
* sysdeps/s390/multiarch/strpbrk.c: Likewise.
* sysdeps/s390/multiarch/strrchr.c: Likewise.
* sysdeps/s390/multiarch/strspn.c: Likewise.
* sysdeps/s390/multiarch/wcschr.c: Likewise.
* sysdeps/s390/multiarch/wcscmp.c: Likewise.
* sysdeps/s390/multiarch/wcspbrk.c: Likewise.
* sysdeps/s390/multiarch/wcsspn.c: Likewise.
* sysdeps/s390/multiarch/wmemchr.c: Likewise.
* sysdeps/s390/multiarch/wmemset.c: Likewise.
* sysdeps/s390/s390-32/multiarch/memcmp.c: Likewise.
* sysdeps/s390/s390-32/multiarch/memcpy.c: Likewise.
* sysdeps/s390/s390-32/multiarch/memset.c: Likewise.
* sysdeps/s390/s390-64/multiarch/memcmp.c: Likewise.
* sysdeps/s390/s390-64/multiarch/memcpy.c: Likewise.
* sysdeps/s390/s390-64/multiarch/memset.c: Likewise.
Nothing depends on the PTW macro anymore, so the mechanism to define
PTW for recompliations of libc routines is no longer needed. The
source files are still recompiled for the nptl directory, just without
the “ptw-” prefix.
(Reducing the number of pattern rules in sysd-rules is critical for
improving make performance.)
This patch adds S/390 versions of fegetmode and fesetmode. Untested.
* sysdeps/s390/fpu/fegetmode.c: New file.
* sysdeps/s390/fpu/fesetmode.c: Likewise.
TS 18661-1 defines a type femode_t to represent the set of dynamic
floating-point control modes (such as the rounding mode and trap
enablement modes), and functions fegetmode and fesetmode to manipulate
those modes (without affecting other state such as the raised
exception flags) and a corresponding macro FE_DFL_MODE.
This patch series implements those interfaces for glibc. This first
patch adds the architecture-independent pieces, the x86 and x86_64
implementations, and the <bits/fenv.h> and ABI baseline updates for
all architectures so glibc keeps building and passing the ABI tests on
all architectures. Subsequent patches add the fegetmode and fesetmode
implementations for other architectures.
femode_t is generally an integer type - the same type as fenv_t, or as
the single element of fenv_t where fenv_t is a structure containing a
single integer (or the single relevant element, where it has elements
for both status and control registers) - except where architecture
properties or consistency with the fenv_t implementation indicate
otherwise. FE_DFL_MODE follows FE_DFL_ENV in whether it's a magic
pointer value (-1 cast to const femode_t *), a value that can be
distinguished from valid pointers by its high bits but otherwise
contains a representation of the desired register contents, or a
pointer to a constant variable (the powerpc case; __fe_dfl_mode is
added as an exported constant object, an alias to __fe_dfl_env).
Note that where architectures (that share a register between control
and status bits) gain definitions of new floating-point control or
status bits in future, the implementations of fesetmode for those
architectures may need updating (depending on whether the new bits are
control or status bits and what the implementation does with
previously unknown bits), just like existing implementations of
<fenv.h> functions that take care not to touch reserved bits may need
updating when the set of reserved bits changes. (As any new bits are
outside the scope of ISO C, that's just a quality-of-implementation
issue for supporting them, not a conformance issue.)
As with fenv_t, femode_t should properly include any software DFP
rounding mode (and for both fenv_t and femode_t I'd consider that
fragment of DFP support appropriate for inclusion in glibc even in the
absence of the rest of libdfp; hardware DFP rounding modes should
already be included if the definitions of which bits are status /
control bits are correct).
Tested for x86_64, x86, mips64 (hard float, and soft float to test the
fallback version), arm (hard float) and powerpc (hard float, soft
float and e500). Other architecture versions are untested.
* math/fegetmode.c: New file.
* math/fesetmode.c: Likewise.
* sysdeps/i386/fpu/fegetmode.c: Likewise.
* sysdeps/i386/fpu/fesetmode.c: Likewise.
* sysdeps/x86_64/fpu/fegetmode.c: Likewise.
* sysdeps/x86_64/fpu/fesetmode.c: Likewise.
* math/fenv.h: Update comment on inclusion of <bits/fenv.h>.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fegetmode): New function
declaration.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetmode): Likewise.
* bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New
typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/m68k/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/microblaze/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (__fe_dfl_mode): New variable
declaration.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/tile/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* manual/arith.texi (FE_DFL_MODE): Document macro.
(fegetmode): Document function.
(fesetmode): Likewise.
* math/Versions (fegetmode): New libm symbol at version
GLIBC_2.25.
(fesetmode): Likewise.
* math/Makefile (libm-support): Add fegetmode and fesetmode.
(tests): Add test-femode and test-femode-traps.
* math/test-femode-traps.c: New file.
* math/test-femode.c: Likewise.
* sysdeps/powerpc/fpu/fenv_const.c (__fe_dfl_mode): Declare as
alias for __fe_dfl_env.
* sysdeps/powerpc/nofpu/fenv_const.c (__fe_dfl_mode): Likewise.
* sysdeps/powerpc/powerpc32/e500/nofpu/fenv_const.c
(__fe_dfl_mode): Likewise.
* sysdeps/powerpc/Versions (__fe_dfl_mode): New libm symbol at
version GLIBC_2.25.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
On s390 feraiseexcept (FE_OVERFLOW|FE_UNDERFLOW) sets FE_INEXACT, too.
This patch uses z196 zarch load rounded instruction which can suppress
FE_INEXACT exception if gcc has z196 support in used configuration.
Otherwise FE_INEXACT flag is set as before. The gcc support is tested
in a new configure-check.
A comment in fsetexcptflg.c is corrected as new exceptions are not
executed with the next floating-point instruction if fpc is set with
_FPU_SETCW macro. It seems the comment was copied e.g. from
sysdeps/x86_64/fpu/fsetexcptflg.c file.
ChangeLog:
* config.h.in (HAVE_S390_MIN_Z196_ZARCH_ASM_SUPPORT):
New undefine.
* sysdeps/s390/configure.ac: Add test for z196 zarch support.
* sysdeps/s390/configure: Regenerated.
* sysdeps/s390/fpu/fraiseexcpt.c (__feraiseexcept): Use ledbra
instruction for raising over-/underflow if z196 zarch is supported
by default.
* sysdeps/s390/fpu/fsetexcptflg.c (fesetexceptflag):
Correct comment.
TS 18661-1 defines an fetestexceptflag function to test the exception
state saved in an fexcept_t object by fegetexceptflag.
This patch implements this function for glibc. Almost all
architectures save exception state in such a way that it can be
directly ANDed with exception flag bits, so rather than having lots of
fetestexceptflag implementations that all do the same thing, the math/
implementation is made to use this generic logic (which is also OK in
the fallback case where FE_ALL_EXCEPT is zero). The only architecture
that seems to need anything different is s390.
(fegetexceptflag and fesetexceptflag use abbreviated filenames
fgetexcptflg.c and fsetexcptflg.c. Because we are no longer concerned
by 14-character filename limits, fetestexceptflag uses the obvious
filename fetestexceptflag.c.)
The NEWS entry is intended to be expanded along the lines given in
<https://sourceware.org/ml/libc-alpha/2016-08/msg00356.html> when
fegetmode and fesetmode are added.
Tested for x86_64, x86, mips64 and powerpc.
* math/fetestexceptflag.c: New file.
* sysdeps/s390/fpu/fetestexceptflag.c: Likewise. Comment by
Stefan Liebler.
* math/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(fetestexceptflag): New function declaration.
* manual/arith.texi (fetestexceptflag): Document function.
* math/Versions (fetestexceptflag): New libm symbol at version
GLIBC_2.25.
* math/Makefile (libm-support): Add fetestexceptflag.
(tests): Add test-fetestexceptflag.
* math/test-fetestexceptflag.c: New file.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
If the default memcpy variant is called with a length of >1MB on 31bit,
r13 is clobbered as the algorithm is switching to mvcle. The mvcle code
returns without restoring r13. All other cases are restoring r13.
If memcpy is called from outside libc the ifunc resolver will only select
this variant if running on machines older than z10.
Otherwise or if memcpy is called from inside libc, this default memcpy
variant is called.
The testcase timezone/tst-tzset is triggering this issue in some combinations
of gcc versions and optimization levels.
This bug was introduced in commit 04bb21ac93
and thus is a regression compared to former glibc 2.23 release.
This patch removes the usage of r13 at all. Thus it is not saved and restored.
The base address for execute-instruction is now stored in r5 which is obtained
after r5 is not needed anymore as 256byte block counter.
ChangeLog:
* sysdeps/s390/s390-32/memcpy.S (memcpy): Eliminate the usage
of r13 as it is not restored in mvcle case.
On s390, the current prelink undo code in elf_machine_lazy_rel()
has the requirement, that the plt stubs use the first got slots
after the 3 reserved ones.
In case of undoing prelink, the plt got slots are reset to the correct
addresses whithin the corresponding plt-stub. Therefore the address
is calculated by the address of the first plt-stub-address which
was written by prelink (see l->l_mach.plt) to got[1] and index of
current relocation multiplied with 32 (=size of one plt slot).
The index was calculated with ¤t-got-slot - &got[3].
This patch removes the requirement, that the plt-got-slots are
starting at got[3]. The index is now calculated with
¤t-reloc - &reloc[0]. The first struct Elf64_Rela is stored
at DT_JMPREL.
This patch is needed to prepare for partial relro support.
Ulrich Weigand suggested this approach to use DT_JMPREL - Thanks.
ChangeLog:
* sysdeps/s390/linkmap.h (struct link_map_machine):
Remove member gotplt and add member jmprel.
* sysdeps/s390/s390-32/dl-machine.h
(elf_machine_runtime_setup): Setup member jmprel with DT_JMPREL
instead of gotplt with &got[3].
(elf_machine_lazy_rel): Calculate address with reloc and jmprel.
* sysdeps/s390/s390-64/dl-machine.h: Likewise.
According to the latest Unicode standard, a conversion from/to UTF-xx has
to report an error if the character value is in range of an utf16 surrogate
(0xd800..0xdfff). See https://sourceware.org/ml/libc-help/2015-12/msg00015.html.
Thus the cu42 instruction, which converts from utf32 to utf16, has to be
disabled because it does not report an error in case of a value in range of
a low surrogate (0xdc00..0xdfff). The etf3eh variant is removed and the c,
vector variant is adjusted to handle the value in range of an utf16 low
surrogate correctly.
ChangeLog:
* sysdeps/s390/utf16-utf32-z9.c: Disable cu42 instruction and report
an error in case of a value in range of an utf16 low surrogate.
According to the latest Unicode standard, a conversion from/to UTF-xx has
to report an error if the character value is in range of an utf16 surrogate
(0xd800..0xdfff). See https://sourceware.org/ml/libc-help/2015-12/msg00015.html.
Thus the cu41 instruction, which converts from utf32 to utf8, has to be
disabled because it does not report an error in case of a value in range of
a low surrogate (0xdc00..0xdfff). The etf3eh variant is removed and the c,
vector variant is adjusted to handle the value in range of an utf16 low
surrogate correctly.
ChangeLog:
* sysdeps/s390/utf8-utf32-z9.c: Disable cu41 instruction and report
an error in case of a value in range of an utf16 low surrogate.
This patch reworks the existing s390 64bit specific iconv modules in order
to use them on s390 31bit, too.
Thus the parts for subdirectory iconvdata in sysdeps/s390/s390-64/Makefile
were moved to sysdeps/s390/Makefile so that they apply on 31bit, too.
All those modules are moved from sysdeps/s390/s390-64 directory to sysdeps/s390.
The iso-8859-1 to/from cp037 module was adjusted, to use brct (branch relative
on count) instruction on 31bit s390 instead of brctg, because the brctg is a
zarch instruction and is not available on a 31bit kernel.
The utf modules are using zarch instructions, thus the directive machinemode
zarch_nohighgprs was added to the inline assemblies to omit the high-gprs flag
in the shared libraries. Otherwise they can't be loaded on a 31bit kernel.
The ifunc resolvers were adjusted in order to call the etf3eh or vector variants
only if zarch instructions are available (64bit kernel in 31bit compat-mode).
Furthermore some variable types were changed. E.g. unsigned long long would be
a register pair on s390 31bit, but we want only one single register.
For variables of type size_t the register contents have to be enlarged from a
32bit to a 64bit value on 31bit, because the inline assemblies uses 64bit values
in such cases.
ChangeLog:
* sysdeps/s390/s390-64/Makefile (iconvdata-subdirectory):
Move to ...
* sysdeps/s390/Makefile: ... here.
* sysdeps/s390/s390-64/iso-8859-1_cp037_z900.c: Move to ...
* sysdeps/s390/iso-8859-1_cp037_z900.c: ... here.
(BRANCH_ON_COUNT): New define.
(TR_LOOP): Use BRANCH_ON_COUNT instead of brctg.
* sysdeps/s390/s390-64/utf16-utf32-z9.c: Move to ...
* sysdeps/s390/utf16-utf32-z9.c: ... here and adjust to
run on s390-32, too.
* sysdeps/s390/s390-64/utf8-utf16-z9.c: Move to ...
* sysdeps/s390/utf8-utf16-z9.c: ... here and adjust to
run on s390-32, too.
* sysdeps/s390/s390-64/utf8-utf32-z9.c: Move to ...
* sysdeps/s390/utf8-utf32-z9.c: ... here and adjust to
run on s390-32, too.
This patch reworks the s390 specific module to convert between utf16 and utf32.
Now ifunc is used to choose either the c or etf3eh (with convert utf
instruction) variants at runtime.
Furthermore a new vector variant for z13 is introduced which will be build
and chosen if vector support is available at build / runtime.
In case of converting utf 32 to utf16, the vector variant optimizes input of
2byte utf16 characters. The convert utf instruction is used if an utf16
surrogate is found.
For the other direction utf16 to utf32, the cu24 instruction can't be re-
enabled, because it does not report an error, if the input-stream consists of
a single low surrogate utf16 char (e.g. 0xdc00). This applies to the newest z13,
too. Thus there is only the c or the new vector variant, which can handle utf16
surrogate characters.
This patch also fixes some whitespace errors. Furthermore, the etf3eh variant is
handling the "UTF-xx//IGNORE" case now. Before they ignored the ignore-case and
always stopped at an error.
ChangeLog:
* sysdeps/s390/s390-64/utf16-utf32-z9.c: Use ifunc to select c,
etf3eh or new vector loop-variant.
This patch reworks the s390 specific module to convert between utf8 and utf16.
Now ifunc is used to choose either the c or etf3eh (with convert utf instruction)
variants at runtime. Furthermore a new vector variant for z13 is introduced
which will be build and chosen if vector support is available at build / runtime.
In case of converting utf 8 to utf16, the vector variant optimizes input of
1byte utf8 characters. The convert utf instruction is used if a multibyte utf8
character is found.
For the other direction utf16 to utf8, the cu21 instruction can't be re-enabled,
because it does not report an error, if the input-stream consists of a single
low surrogate utf16 char (e.g. 0xdc00). This applies to the newest z13, too.
Thus there is only the c or the new vector variant, which can handle 1..4 byte
utf8 characters.
The c variant from utf16 to utf8 has beed fixed. If a high surrogate was at the
end of the input-buffer, then errno was set to EINVAL and the input-pointer
pointed just after the high surrogate. Now it points to the beginning of the
high surrogate.
This patch also fixes some whitespace errors. The c variant from utf8 to utf16
is now checking that tail-bytes starts with 0b10... and the value is not in
range of an utf16 surrogate.
Furthermore, the etf3eh variants are handling the "UTF-xx//IGNORE" case now.
Before they ignored the ignore-case and always stopped at an error.
ChangeLog:
* sysdeps/s390/s390-64/utf8-utf16-z9.c: Use ifunc to select c,
etf3eh or new vector loop-variant.
This patch reworks the s390 specific module to convert between utf8 and utf32.
Now ifunc is used to choose either the c or etf3eh (with convert utf
instruction) variants at runtime.
Furthermore a new vector variant for z13 is introduced which will be build
and chosen if vector support is available at build / runtime.
The vector variants optimize input of 1byte utf8 characters. The convert utf
instruction is used if a multibyte utf8 character is found.
This patch also fixes some whitespace errors. The c variants are rejecting
UTF-16 surrogates and values above 0x10ffff now.
Furthermore, the etf3eh variants are handling the "UTF-xx//IGNORE" case now.
Before they ignored the ignore-case and always stopped at an error.
ChangeLog:
* sysdeps/s390/s390-64/utf8-utf32-z9.c: Use ifunc to select c, etf3eh
or new vector loop-variant.
This patch reworks the s390 specific module which used the z900
translate one to one instruction. Now the g5 translate instruction is used,
because it outperforms the troo instruction.
ChangeLog:
* sysdeps/s390/s390-64/iso-8859-1_cp037_z900.c (TROO_LOOP):
Rename to TR_LOOP and usage of tr instead of troo instruction.
This patch introduces a s390 specific gconv_simple.c file which provides
optimized versions for z13 with vector instructions, which will be chosen at
runtime via ifunc.
The optimized conversions can convert between internal and ascii, ucs4, ucs4le,
ucs2, ucs2le.
If the build-environment lacks vector support, then iconv/gconv_simple.c
is used wihtout any change. Otherwise iconvdata/gconv_simple.c is used to create
conversion loop routines without vector instructions as fallback, if vector
instructions aren't available at runtime.
ChangeLog:
* sysdeps/s390/multiarch/gconv_simple.c: New File.
* sysdeps/s390/multiarch/Makefile (sysdep_routines): Add gconv_simple.
This patch introduces a s390 specific 8bit-generic.c file which provides an
optimized version for z13 with translate-/vector-instructions, which will be
chosen at runtime via ifunc.
If the build-environment lacks vector support, then iconvdata/8bit-generic.c
is used wihtout any change. Otherwise iconvdata/8bit-generic.c is used to create
conversion loop routines without vector instructions as fallback, if vector
instructions aren't available at runtime.
The vector routines can only be used with charsets where the maximum UCS4 value
fits in 1 byte size. Then the hardware translate-instruction is used
to translate between up to 256 generic characters and "1 byte UCS4"
characters at once. The vector instructions are used to convert between
the "1 byte UCS4" and UCS4.
The gen-8bit.sh script in sysdeps/s390/multiarch generates the conversion
table to_ucs1. Therefore in sysdeps/s390/multiarch/Makefile is added an
override define generate-8bit-table, which is originally defined in
iconvdata/Makefile. This version calls the gen-8bit.sh in iconvdata folder
and the s390 one.
ChangeLog:
* sysdeps/s390/multiarch/8bit-generic.c: New File.
* sysdeps/s390/multiarch/gen-8bit.sh: New File.
* sysdeps/s390/multiarch/Makefile (generate-8bit-table):
New override define.
* sysdeps/s390/multiarch/iconv/skeleton.c: Likewise.
The S390 specific test checks if the gcc has support for vector registers
by compiling an inline assembly which clobbers vector registers.
On success the macro HAVE_S390_VX_GCC_SUPPORT is defined.
This macro can be used to determine if e.g. clobbering vector registers
is allowed or not.
ChangeLog:
* config.h.in (HAVE_S390_VX_GCC_SUPPORT): New macro undefine.
* sysdeps/s390/configure.ac: Add test for S390 vector register
support in gcc.
* sysdeps/s390/configure: Regenerated.
This patch introduces a way to provide an architecture dependent gconv-modules
file. Before this patch, the gconv-modules file was normally installed from
src-dir/iconvdata/gconv-modules. The S390 Makefile had overridden the
installation recipe (with a make warning) in order to install the
gconv-module-s390 file from build-dir.
The iconvdata/Makefile provides another recipe, which copies the gconv-modules
file from src to build dir, which are used by the testcases.
Thus the testcases does not use the currently build s390-modules.
This patch uses build-dir/iconvdata/gconv-modules for installation, which
is generated by concatenating src-dir/iconvdata/gconv-modules and the
architecture specific one. The latter one can be specified by setting the variable
sysdeps-gconv-modules in sysdeps/.../Makefile.
The architecture specific gconv-modules file is emitted before the common one
because these modules aren't used in all possible conversions. E.g. the converting
from INTERNAL to UTF-16 used the common UTF-16.so module instead of UTF16_UTF32_Z9.so.
This way, the s390-Makefile does not need to override the recipe for gconv-modules
and no warning is emitted anymore.
Since we no longer support empty objpfx the conditional test in iconvdata/Makefile
is removed.
ChangeLog:
* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules):
Install file from $(objpfx)gconv-modules.
($(objpfx)gconv-modules): Concatenate architecture specific file
in variable sysdeps-gconv-modules and gconv-modules in src dir.
* sysdeps/s390/gconv-modules: New file.
* sysdeps/s390/s390-64/Makefile: ($(inst_gconvdir)/gconv-modules):
Deleted.
($(objpfx)gconv-modules-s390): Deleted.
(sysdeps-gconv-modules): New variable.
There exist optimized memcpy functions on s390, but no optimized mempcpy.
This patch adds mempcpy entry points in memcpy.S files, which
use the memcpy implementation. Now mempcpy itself is also an IFUNC function
as memcpy is and the variants are listed in ifunc-impl-list.c.
The s390 string.h does not define _HAVE_STRING_ARCH_mempcpy.
Instead mempcpy string/string.h inlines memcpy() + n.
If n is constant and small enough, GCC emits instructions like mvi or mvc
and avoids the function call to memcpy.
If n is not constant, then memcpy is called and n is added afterwards.
If _HAVE_STRING_ARCH_mempcpy would be defined, mempcpy would be called in
every case.
According to PR70140 "Inefficient expansion of __builtin_mempcpy"
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=70140) GCC should handle a
call to mempcpy in the same way as memcpy. Then either the mempcpy macro
in string/string.h has to be removed or _HAVE_STRING_ARCH_mempcpy has to
be defined for S390.
ChangeLog:
[BZ #19765]
* sysdeps/s390/mempcpy.S: New File.
* sysdeps/s390/multiarch/mempcpy.c: Likewise.
* sysdeps/s390/multiarch/Makefile (sysdep_routines): Add mempcpy.
* sysdeps/s390/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list):
Add mempcpy variants.
* sysdeps/s390/s390-32/memcpy.S: Add mempcpy entry point.
(memcpy): Adjust to be usable from mempcpy entry point.
(__memcpy_mvcle): Likewise.
* sysdeps/s390/s390-64/memcpy.S: Likewise.
* sysdeps/s390/s390-32/multiarch/memcpy-s390.S: Add entry points
____mempcpy_z196, ____mempcpy_z10 and add __GI_ symbols for mempcpy.
(__memcpy_z196): Adjust to be usable from mempcpy entry point.
(__memcpy_z10): Likewise.
* sysdeps/s390/s390-64/multiarch/memcpy-s390x.S: Likewise.
On s390, the memcpy, memcmp, memset functions are IFUNC symbols,
which are created with s390_libc_ifunc-macro.
This macro creates a __GI_ symbol which is set to the
ifunced symbol. Thus calls within libc.so to e.g. memcpy
result in a call to *ABS*+0x954c0@plt stub and afterwards
to the resolved memcpy-ifunc-variant.
This patch sets the __GI_ symbol to the default-ifunc-variant
to avoid the plt call. The __GI_ symbols are now created at the
default variant of ifunced function.
ChangeLog:
* sysdeps/s390/multiarch/ifunc-resolve.h (s390_libc_ifunc):
Remove __GI_ symbol.
* sysdeps/s390/s390-32/multiarch/memcmp-s390.S: Add __GI_memcmp symbol.
* sysdeps/s390/s390-64/multiarch/memcmp-s390x.S: Likewise.
* sysdeps/s390/s390-32/multiarch/memcpy-s390.S: Add __GI_memcpy symbol.
* sysdeps/s390/s390-64/multiarch/memcpy-s390x.S: Likewise.
* sysdeps/s390/s390-32/multiarch/memset-s390.S: Add __GI_memset symbol.
* sysdeps/s390/s390-64/multiarch/memset-s390x.S: Likewise.
The __memcpy_default variant on s390 64bit calculates the number of
256byte blocks in a 64bit register and checks, if they exceed 1MB
to jump to mvcle. Otherwise a mvc-loop is used. The compare-instruction
only checks a 32bit value.
This patch uses a 64bit compare.
ChangeLog:
* sysdeps/s390/s390-64/memcpy.S (memcpy):
Use cghi instead of chi to compare 64bit value.
If more than 255 bytes should be copied, the algorithm jumps away.
Before this patch, it jumps to the mvc-loop (.L_G5_12).
Now it jumps first to the "> 1MB" check, which jumps away to
__memcpy_mvcle. Otherwise, the mvc-loop (.L_G5_12) copies the bytes.
ChangeLog:
* sysdeps/s390/s390-32/memcpy.S (memcpy):
Jump to 1MB check before executing mvc-loop.
if glibc is build with -march=z900 | -march=z990,
the startup file gcrt1.o (used if you link with gcc -pg)
contains R_390_GOT12 | R_390_GOT20 relocations.
Thus, an entry in the GOT can be addressed relative to the GOT pointer
with a 12 | 20 bit displacement value.
The startup files should not contain R_390_GOT12,
R_390_GOT20 relocations, but R_390_GOTENT ones.
This patch removes the overrides of pic-ccflag and
the default pic-ccflag = -fPIC in Makeconfig
is used instead to get the R_390_GOTENT relocations in gcrt1.o.
ChangeLog:
* sysdeps/s390/s390-32/Makefile (pic-ccflag): Remove.
* sysdeps/s390/s390-64/Makefile: Likewise.
This patch uses ahi instead of aghi in 32bit _dl_runtime_resolve
to adjust the stack pointer. This is no functional change,
but a cosmetic one.
ChangeLog:
* sysdeps/s390/s390-32/dl-trampoline.h (_dl_runtime_resolve):
Use ahi instead of aghi to adjust stack pointer.
Starting with z13, vector registers can also occur as argument registers.
Thus the passed input/output register structs for
la_s390_[32|64]_gnu_plt[enter|exit] functions should reflect those new
registers. This patch extends these structs La_s390_regs and La_s390_retval
and adjusts _dl_runtime_profile() to handle those fields in case of
running on a z13 machine.
ChangeLog:
* sysdeps/s390/bits/link.h: (La_s390_vr) New typedef.
(La_s390_32_regs): Append vector register lr_v24-lr_v31.
(La_s390_64_regs): Likewise.
(La_s390_32_retval): Append vector register lrv_v24.
(La_s390_64_retval): Likeweise.
* sysdeps/s390/s390-32/dl-trampoline.h (_dl_runtime_profile):
Handle extended structs La_s390_32_regs and La_s390_32_retval.
* sysdeps/s390/s390-64/dl-trampoline.h (_dl_runtime_profile):
Handle extended structs La_s390_64_regs and La_s390_64_retval.
On s390, no fpr/vrs were saved while resolving a symbol
via _dl_runtime_resolve/_dl_runtime_profile.
According to the abi, the fpr-arguments are defined as call clobbered.
In leaf-functions, gcc 4.9 and newer can use fprs for saving/restoring gprs
instead of saving them to the stack.
If gcc do this in one of the resolver-functions, then the floating point
arguments of a library-function are invalid for the first library-function-call.
Thus, this patch saves/restores the fprs around the resolving code.
The same could occur for vector registers. Furthermore an ifunc-resolver
could also clobber the vector/floating point argument registers.
Thus this patch provides the further variants _dl_runtime_resolve_vx/
_dl_runtime_profile_vx, which are used if the kernel claims, that
we run on a machine with vector registers.
Furthermore, if _dl_runtime_profile calls _dl_call_pltexit,
the pointers to inregs-/outregs-structs were setup invalid.
Now they point to the correct location in the stack-frame.
Before branching back to the caller, the return values are now
restored instead of containing the return values of the
_dl_call_pltexit() call.
On s390-32, an endless loop occurs if _dl_call_pltexit() should be called.
Now, this code-path branches to this function instead of just after the
preceding basr-instruction.
ChangeLog:
* sysdeps/s390/s390-32/dl-trampoline.S: Include dl-trampoline.h twice
to create a non-vector/vector version for _dl_runtime_resolve and
_dl_runtime_profile. Move implementation to ...
* sysdeps/s390/s390-32/dl-trampoline.h: ... here.
(_dl_runtime_resolve) Save and restore fpr/vrs.
(_dl_runtime_profile) Save and restore vrs and fix some issues
if _dl_call_pltexit is called.
* sysdeps/s390/s390-32/dl-machine.h (elf_machine_runtime_setup):
Choose the correct resolver function if running on a machine with vx.
* sysdeps/s390/s390-64/dl-trampoline.S: Include dl-trampoline.h twice
to create a non-vector/vector version for _dl_runtime_resolve and
_dl_runtime_profile. Move implementation to ...
* sysdeps/s390/s390-64/dl-trampoline.h: ... here.
(_dl_runtime_resolve) Save and restore fpr/vrs.
(_dl_runtime_profile) Save and restore vrs and fix some issues
* sysdeps/s390/s390-64/dl-machine.h: (elf_machine_runtime_setup):
Choose the correct resolver function if running on a machine with vx.
As discussed in
https://sourceware.org/ml/libc-alpha/2015-10/msg00403.html
the setting of _STRING_ARCH_unaligned currently controls the external
GLIBC ABI as well as selecting the use of unaligned accesses withing
GLIBC.
Since _STRING_ARCH_unaligned was recently changed for AArch64, this
would potentially break the ABI in GLIBC 2.23, so split the uses and add
_STRING_INLINE_unaligned to select the string ABI. This setting must be
fixed for each target, while _STRING_ARCH_unaligned may be changed from
release to release. _STRING_ARCH_unaligned is used unconditionally in
glibc. But <bits/string.h>, which defines _STRING_ARCH_unaligned, isn't
included with -Os. Since _STRING_ARCH_unaligned is internal to glibc and
may change between glibc releases, it should be made private to glibc.
_STRING_ARCH_unaligned should defined in the new string_private.h heade
file which is included unconditionally from internal <string.h> for glibc
build.
[BZ #19462]
* bits/string.h (_STRING_ARCH_unaligned): Renamed to ...
(_STRING_INLINE_unaligned): This.
* include/string.h: Include <string_private.h>.
* string/bits/string2.h: Replace _STRING_ARCH_unaligned with
_STRING_INLINE_unaligned.
* sysdeps/aarch64/bits/string.h (_STRING_ARCH_unaligned): Removed.
(_STRING_INLINE_unaligned): New.
* sysdeps/aarch64/string_private.h: New file.
* sysdeps/generic/string_private.h: Likewise.
* sysdeps/m68k/m680x0/m68020/string_private.h: Likewise.
* sysdeps/s390/string_private.h: Likewise.
* sysdeps/x86/string_private.h: Likewise.
* sysdeps/m68k/m680x0/m68020/bits/string.h
(_STRING_ARCH_unaligned): Renamed to ...
(_STRING_INLINE_unaligned): This.
* sysdeps/s390/bits/string.h (_STRING_ARCH_unaligned): Renamed
to ...
(_STRING_INLINE_unaligned): This.
* sysdeps/sparc/bits/string.h (_STRING_ARCH_unaligned): Renamed
to ...
(_STRING_INLINE_unaligned): This.
* sysdeps/x86/bits/string.h (_STRING_ARCH_unaligned): Renamed
to ...
(_STRING_INLINE_unaligned): This.
I've regenerated ulps from scratch for s390/s390x.
All math testcases are passing afterwards.
ChangeLog:
* sysdeps/s390/fpu/libm-test-ulps: Regenerated.
I get some math test-failures on s390 for float/double/ldouble for
various lrint/lround functions like:
lrint (0x1p64): Exception "Inexact" set
lrint (-0x1p64): Exception "Inexact" set
lround (0x1p64): Exception "Inexact" set
lround (-0x1p64): Exception "Inexact" set
...
GCC emits "convert to fixed" instructions for casting floating point
values to integer values. These instructions raise invalid and inexact
exceptions if the floating point value exceeds the integer type ranges.
This patch enables the various FIX_DBL_LONG_CONVERT_OVERFLOW macros in
order to avoid a cast from floating point to integer type and raise the
invalid exception with feraiseexcept.
The ldbl-128 rint/round functions are now using the same logic.
ChangeLog:
[BZ #19486]
* sysdeps/s390/fix-fp-int-convert-overflow.h: New File.
* sysdeps/generic/fix-fp-int-convert-overflow.h
(FIX_LDBL_LONG_CONVERT_OVERFLOW,
FIX_LDBL_LLONG_CONVERT_OVERFLOW): New define.
* sysdeps/arm/fix-fp-int-convert-overflow.h: Likewise.
* sysdeps/mips/mips32/fpu/fix-fp-int-convert-overflow.h:
Likewise.
* sysdeps/ieee754/ldbl-128/s_lrintl.c (__lrintl):
Avoid conversions to long int where inexact exceptions
could be raised.
* sysdeps/ieee754/ldbl-128/s_lroundl.c (__lroundl):
Likewise.
* sysdeps/ieee754/ldbl-128/s_llrintl.c (__llrintl):
Avoid conversions to long long int where inexact exceptions
could be raised.
* sysdeps/ieee754/ldbl-128/s_llroundl.c (__llroundl):
Likewise.
Preparation for gcc -fsplit-stack support (gcc bug #68191). The new
field is basically identical to the one on x86. Its TCB offset needs
to be constant, as it'll be hardcoded in gcc.
ChangeLog:
* sysdeps/s390/nptl/tls.h (struct tcbhead_t): Add __private_ss field.
