Since strlen.S contains SSE2 version of strlen/strnlen and SSE4.1
version of wcslen/wcsnlen, move strlen.S to multiarch/strlen-vec.S
and include multiarch/strlen-vec.S from SSE2 and SSE4.1 variants.
This also removes the unused symbols, __GI___strlen_sse2 and
__GI___wcsnlen_sse4_1.
The usage of signals to implementation pthread cancellation is an
implementation detail and should not be visible through cancellation
entrypoints.
However now that pthread_cancel always send the SIGCANCEL, some
entrypoint might be interruptable and return EINTR to the caller
(for instance on sem_wait).
Using SA_RESTART hides this, since the cancellation handler should
either act uppon cancellation (if asynchronous cancellation is enable)
or ignore the cancellation internal signal.
Checked on x86_64-linux-gnu and i686-linux-gnu.
* NEWS: Don't imply the default will always be 32-bit.
* manual/creature.texi (Feature Test Macros):
Say that _TIME_BITS and _FILE_OFFSET_BITS defaults
may change in future releases.
On filesystems that do not support dt_type, a regular file shows up as
DT_UNKNOWN. Fall back to using lstat64 to read file properties in
such cases.
Reviewed-by: DJ Delorie <dj@redhat.com>
Drop local copy of gconv file parsing and use the one in
gconv_parseconfdir.h instead. Now there is a single implementation of
configuration file parsing.
Reviewed-by: DJ Delorie <dj@redhat.com>
Split configuration file processing into a separate header file and
include it. Macroize all calls that need to go through internal
interfaces so that iconvconfig can also use them.
Reviewed-by: DJ Delorie <dj@redhat.com>
The modules and nmodules parameters passed to add_modules, add_alias,
etc. are not used and are hence unnecessary. Remove them so that
their signatures match the functions in iconvconfig.
Reviewed-by: DJ Delorie <dj@redhat.com>
Reviewed-by: Andreas Schwab <schwab@linux-m68k.org>
The alloca sizes ought to be constrained to PATH_MAX, but replace them
with dynamic allocation to be safe. A static PATH_MAX array would
have worked too but Hurd does not have PATH_MAX and the code path is
not hot enough to micro-optimise this allocation. Revisit if any of
those realities change.
Reviewed-by: DJ Delorie <dj@redhat.com>
The (private) symbols __pthread_clock_gettime, __pthread_clock_settime and
__pthread_initialize_minimal haven't been defined by libpthread for some
time.
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one.
The large timeout are already tests by io/tst-utimensat-skeleton.c.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
It breaks the usage case of live migration like CRIU or similar
and most usages can be optimized away by either building glibc with
a minimum 5.1 kernel or by using the 32-bit syscall for the common
case.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
It breaks the usage case of live migration like CRIU or similar.
The performance drawback is it would require an extra syscall
on older kernels without 64-bit time support.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
It breaks the usage case of live migration like CRIU or similar.
The performance drawback is it would require an extra syscall
on older kernels without 64-bit time support.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one. This also avoids the need
to use supports_time64() (which breaks the usage case of live migration
like CRIU or similar).
It also fixes an issue on 32-bit select call for !__ASSUME_PSELECT
(microblase with older kernels only) where the expected timeout
is a 'struct timeval' instead of 'struct timespec'.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one. This also avoids the need
to use supports_time64() (which breaks the usage case of live migration
like CRIU or similar).
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one. This also avoids the need
to use supports_time64() (which breaks the usage case of live migration
like CRIU or similar).
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
It is a simple wrapper over timer_create, timer_settime, and
sigaction. It will be used to check for large timeout to trigger an
EINTR and to avoid use a large timeout (as for alarm()).
Reviewed-by: Lukasz Majewski <lukma@denx.de>
For the legacy ABI with supports 32-bit time_t it calls the 64-bit
time directly, since the LFS symbols calls the 64-bit time_t ones
internally.
Checked on i686-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
MALLOC_CHECK_ and mcheck() are two different malloc checking features.
tst-mcheck does not check mcheck(), instead it checks MALLOC_CHECK_,
so rename the file to avoid confusion.
This mirrors the situation on Hurd. These directories are on
the include search part, so #include <pthreadP.h> works after this
change on both Hurd and nptl.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The pthread-based implementation is the generic one. Replacing
the stubs makes it clear that they do not have to be adjusted for
the libpthread move.
Result of:
git mv -f sysdeps/pthread/aio_misc.h sysdeps/generic/
git mv sysdeps/pthread/timer_routines.c sysdeps/htl/
git mv -f sysdeps/pthread/{aio,lio,timer}_*.c rt/
Followed by manual adjustment of the #include paths in
sysdeps/unix/sysv/linux/wordsize-64, and a move of the version
definitions formerly in sysdeps/pthread/Versions.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This function has no dependency on libpthread, so the move is also
applied to Hurd.
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This function has no dependency on libpthread, so the move is also
applied to Hurd.
To avoid localplt failures, use __open64_nocancel instead of
pthread_setcancelstate and open.
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Result of: git mv -f sysdeps/posix/shm_unlink.c rt
and manual removal of the _POSIX_MAPPED_FILES preprocessor condition.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Result of: git mv -f sysdeps/posix/shm_open.c rt
and manual removal of the _POSIX_MAPPED_FILES preprocessor condition.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The variable name was incorrect, and the existing librt-routines
variable needs to be augmented (not assigned) in rt/Makefile.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
dlerrror_run in elf/dl-libc.c needs to call GLRO (dl_catch_error)
from the base namespace, just like the exported dlerror
implementation.
Fixes commit b2964eb1d9 ("dlfcn:
Failures after dlmopen should not terminate process [BZ #24772]").
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The time64-compat.i needed for the time64-compat.mk Makeconfig include
ends up trying to include libc-modules.h, which is not generated until
later. This results in an error during build which is not noticed
because it somehow does not terminate the build.
Exclude the modules cppflags from the pre-processing command and fix
up the time64-compat.mk target so that the build runs without issues.
Reviewed-by: Andreas Schwab <schwab@linux-m68k.org>
These were turned into compat symbols as part of the libpthread
move. It turns out they are used by language run-time libraries
(e.g., the GCC D front end), so it makes to preserve them as
external symbols even though they are not declared in any header
file.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Starting with recent commit 92a7d13439
"x86-64: Align child stack to 16 bytes [BZ #27902]"
the new test misc/tst-misalign-clone has failed on s390x/s390.
This patch is now aligning the stack to a double
word boundary as also done in start.S files.
The patch adds redirections for xstat, xlstat, and xfstat when
_TIME_BITS=64 is defined.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The patch adds redirections for xclock_gettime, xclock_settime,
timespec_add, timespec_sub, test_timespec_before_impl,
test_timespec_equal_or_after_impl, support_timespec_ns,
support_timespec_normalize, and support_timespec_check_in_range when
_TIME_BITS=64 is defined.
Co-authored-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Similar to fts, ftw routines passes a stat pointer that might
differ of size and layout when 64-bit time API is used.
Checked on i686-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Similar to glob, fts routines passes a stat pointer that might
differ of size and layout when 64-bit time API is used.
Checked on i686-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The glob might pass a different stat struct for gl_stat and gl_lstat
when GLOB_ALTDIRFUNC is used. This requires add a new 64-bit time
version that also uses 64-bit time stat functions.
Checked on i686-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
