This helps compilers split the codegen for setting up the arguments
(`__expression`, `__filename`, etc...) from the potentially hot cold
where the `assert` is to a presumably cold region on the assertion
failure path.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Sam James <sam@gentoo.org>
Complement commit b03e4d7bd2 ("stdio: fix vfscanf with matches longer
than INT_MAX (bug 27650)") and add a test case for the issue, inspired
by the reproducer provided with the bug report.
This has been verified to succeed as from the commit referred and fail
beforehand.
As the test requires 2GiB of data to be passed around its performance
has been evaluated using a choice of systems and the execution time
determined to be respectively in the range of 9s for POWER9@2.166GHz,
24s for FU740@1.2GHz, and 40s for 74Kf@950MHz. As this is on the verge
of and beyond the default timeout it has been increased by the factor of
8. Regardless, following recent practice the test has been added to the
standard rather than extended set.
Reviewed-by: DJ Delorie <dj@redhat.com>
Add a FAIL test failure helper analogous to FAIL_RET, that does not
cause the current function to return, providing a standardized way to
report a test failure with a message supplied while permitting the
caller to continue executing, for further reporting, cleaning up, etc.
Update existing test cases that provide a conflicting definition of FAIL
by removing the local FAIL definition and then as follows:
- tst-fortify-syslog: provide a meaningful message in addition to the
file name already added by <support/check.h>; 'support_record_failure'
is already called by 'support_print_failure_impl' invoked by the new
FAIL test failure helper.
- tst-ctype: no update to FAIL calls required, with the name of the file
and the line number within of the failure site additionally included
by the new FAIL test failure helper, and error counting plus count
reporting upon test program termination also already provided by
'support_record_failure' and 'support_report_failure' respectively,
called by 'support_print_failure_impl' and 'adjust_exit_status' also
respectively. However in a number of places 'printf' is called and
the error count adjusted by hand, so update these places to make use
of FAIL instead. And last but not least adjust the final summary just
to report completion, with any error count following as reported by
the test driver.
- test-tgmath2: no update to FAIL calls required, with the name of the
file of the failure site additionally included by the new FAIL test
failure helper. Also there is no need to track the return status by
hand as any call to FAIL will eventually cause the test case to return
an unsuccesful exit status regardless of the return status from the
test function, via a call to 'adjust_exit_status' made by the test
driver.
Reviewed-by: DJ Delorie <dj@redhat.com>
Remove local FAIL macro in favor to FAIL_RET from <support/check.h>,
which provides equivalent reporting, with the name of the file of the
failure site additionally included, for the tst-truncate-common core
shared between the tst-truncate and tst-truncate64 tests.
Reviewed-by: DJ Delorie <dj@redhat.com>
Remove local FAIL macro in favor to FAIL_EXIT1 from <support/check.h>,
which provides equivalent reporting, with the name of the file and the
line number within of the failure site additionally included. Remove
FAIL_ERR altogether and include ": %m" explicitly with the format string
supplied to FAIL_EXIT1 as there seems little value to have a separate
macro just for this.
Reviewed-by: DJ Delorie <dj@redhat.com>
Use RXX_LP in RTLD_START_ENABLE_X86_FEATURES. Support shadow stack during
startup for Linux 6.10:
commit 2883f01ec37dd8668e7222dfdb5980c86fdfe277
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Fri Mar 15 07:04:33 2024 -0700
x86/shstk: Enable shadow stacks for x32
1. Add shadow stack support to x32 signal.
2. Use the 64-bit map_shadow_stack syscall for x32.
3. Set up shadow stack for x32.
Add the map_shadow_stack system call to <fixup-asm-unistd.h> and regenerate
arch-syscall.h. Tested on Intel Tiger Lake with CET enabled x32. There
are no regressions with CET enabled x86-64. There are no changes in CET
enabled x86-64 _dl_start_user.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Remove sysdeps/x86_64/x32/dl-machine.h by folding x32 ARCH_LA_PLTENTER,
ARCH_LA_PLTEXIT and RTLD_START into sysdeps/x86_64/dl-machine.h. There
are no regressions on x86-64 nor x32. There are no changes in x86-64
_dl_start_user. On x32, _dl_start_user changes are
<_dl_start_user>:
mov %eax,%r12d
+ mov %esp,%r13d
mov (%rsp),%edx
mov %edx,%esi
- mov %esp,%r13d
and $0xfffffff0,%esp
mov 0x0(%rip),%edi # <_dl_start_user+0x14>
lea 0x8(%r13,%rdx,4),%ecx
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
For now, do not enable this mode by default due to the potential
impact on compatibility with existing deployments.
Reviewed-by: DJ Delorie <dj@redhat.com>
In single-request mode, there is no second response after an error
because the second query has not been sent yet. Waiting for it
introduces an unnecessary timeout.
Reviewed-by: DJ Delorie <dj@redhat.com>
Improve aligned_alloc/calloc/malloc test coverage by adding
multi-threaded tests with random memory allocations and with/without
cross-thread memory deallocations.
Perform a number of memory allocation calls with random sizes limited
to 0xffff.
Use the existing DSO ('malloc/tst-aligned_alloc-lib.c') to randomize
allocator selection.
The multi-threaded allocation/deallocation is staged as described below:
- Stage 1: Half of the threads will be allocating memory and the
other half will be waiting for them to finish the allocation.
- Stage 2: Half of the threads will be allocating memory and the
other half will be deallocating memory.
- Stage 3: Half of the threads will be deallocating memory and the
second half waiting on them to finish.
Add 'malloc/tst-aligned-alloc-random-thread.c' where each thread will
deallocate only the memory that was previously allocated by itself.
Add 'malloc/tst-aligned-alloc-random-thread-cross.c' where each thread
will deallocate memory that was previously allocated by another thread.
The intention is to be able to utilize existing malloc testing to ensure
that similar allocation APIs are also exposed to the same rigors.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
Make sure the DSO used by aligned_alloc/calloc/malloc tests does not get
a global lock on multithreaded tests.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
For each input readelf output, localplt.awk parses each 'Relocation
section' entry, checks its offset against the dynamic section entry, and
saves each DT_JMPREL, DT_RELA, and DT_REL offset value it finds. After
all lines are read, the script checks if any segment offset differed
from 0, meaning at least one 'Relocation section' was matched.
However, if the shared object was built with RELR support and the static
linker could place all the relocation on DT_RELR, there would be no
DT_JMPREL, DT_RELA, and DT_REL entries; only a DT_RELR.
For the current three ABIs that support (aarch64, x86, and powerpc64),
the powerpc64 ld.so shows the behavior above. Both x86_64 and aarch64
show extra relocations on '.rela.dyn', which makes the script check to
succeed.
This patch fixes by handling DT_RELR, where the offset is checked
against the dynamic section entries and if the shared object contains an
entry it means that there are no extra PLT entries (since all
relocations are relative).
It fixes the elf/check-localplt failure on powerpc.
Checked with a build/check for aarch64-linux-gnu, x86_64-linux-gnu,
i686-linux-gnu, arm-linux-gnueabihf, s390x-linux-gnu, powerpc-linux-gnu,
powerpc64-linux-gnu, and powerpc64le-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The powerpc pkey_get/pkey_set support was only added for 64-bit [1],
and tst-pkey only checks if the support was present with pkey_alloc
(which does not fail on powerpc32, at least running a 64-bit kernel).
Checked on powerpc-linux-gnu.
[1] https://sourceware.org/git/gitweb.cgi?p=glibc.git;h=a803367bab167f5ec4fde1f0d0ec447707c29520
Reviewed-By: Andreas K. Huettel <dilfridge@gentoo.org>
AT_HWCAP on some architecture can indeed use all bits.
Checked on x86_64-linux-gnu and powerpc-linux-gnu.
Reviewed-By: Andreas K. Hüttel <dilfridge@gentoo.org>
Xfail elf/tst-platform-1 on x32 since kernel passes i686 in AT_PLATFORM.
See https://sourceware.org/bugzilla/show_bug.cgi?id=22363
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Sam James <sam@gentoo.org>
This avoids a test failure when the system has no /etc/ld.so.cache.
Tested on x86_64-linux-gnu.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
0e75c4a463 ("hurd: Fix pthread_self() without libpthread") added a
declaration for ___pthread_init_thread instead of __pthread_init_thread,
and missed defining the external hidden symbol.
5476f8cd2e ("htl: move pthread_self info libc.") moved the htl
pthread_self() function from libpthread to libc, replacing the previous libc
stub that just returns 0. And 53da64d1cf ("htl: Initialize ___pthread_self
early") added initialization code which is needed before being able to
call pthread_self. It is currently in libpthread, and thus never called
before programs can call pthread_self from libc, which then segfaults
when accessing _pthread_self()->thread.
This moves the initialization to libc itself, as initialized variables, so
pthread_self can always be called fine.
