Previously, the installed objects were named like libc-2.33.so,
and the ABI soname libc.so.6 was just a symbolic link.
The Makefile targets to install these symbolic links are no longer
needed after this, so they are removed with this commit. The more
general $(make-link) command (which invokes scripts/rellns-sh) is
retained because other symbolic links are still needed.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@rehdat.com>
The usage of signals to implementation pthread cancellation is an
implementation detail and should not be visible through cancellation
entrypoints.
However now that pthread_cancel always send the SIGCANCEL, some
entrypoint might be interruptable and return EINTR to the caller
(for instance on sem_wait).
Using SA_RESTART hides this, since the cancellation handler should
either act uppon cancellation (if asynchronous cancellation is enable)
or ignore the cancellation internal signal.
Checked on x86_64-linux-gnu and i686-linux-gnu.
* NEWS: Don't imply the default will always be 32-bit.
* manual/creature.texi (Feature Test Macros):
Say that _TIME_BITS and _FILE_OFFSET_BITS defaults
may change in future releases.
A new build flag, _TIME_BITS, enables the usage of the newer 64-bit
time symbols for legacy ABI (where 32-bit time_t is default). The 64
bit time support is only enabled if LFS (_FILE_OFFSET_BITS=64) is
also used.
Different than LFS support, the y2038 symbols are added only for the
required ABIs (armhf, csky, hppa, i386, m68k, microblaze, mips32,
mips64-n32, nios2, powerpc32, sparc32, s390-32, and sh). The ABIs with
64-bit time support are unchanged, both for symbol and types
redirection.
On Linux the full 64-bit time support requires a minimum of kernel
version v5.1. Otherwise, the 32-bit fallbacks are used and might
results in error with overflow return code (EOVERFLOW).
The i686-gnu does not yet support 64-bit time.
This patch exports following rediretions to support 64-bit time:
* libc:
adjtime
adjtimex
clock_adjtime
clock_getres
clock_gettime
clock_nanosleep
clock_settime
cnd_timedwait
ctime
ctime_r
difftime
fstat
fstatat
futimens
futimes
futimesat
getitimer
getrusage
gettimeofday
gmtime
gmtime_r
localtime
localtime_r
lstat_time
lutimes
mktime
msgctl
mtx_timedlock
nanosleep
nanosleep
ntp_gettime
ntp_gettimex
ppoll
pselec
pselect
pthread_clockjoin_np
pthread_cond_clockwait
pthread_cond_timedwait
pthread_mutex_clocklock
pthread_mutex_timedlock
pthread_rwlock_clockrdlock
pthread_rwlock_clockwrlock
pthread_rwlock_timedrdlock
pthread_rwlock_timedwrlock
pthread_timedjoin_np
recvmmsg
sched_rr_get_interval
select
sem_clockwait
semctl
semtimedop
sem_timedwait
setitimer
settimeofday
shmctl
sigtimedwait
stat
thrd_sleep
time
timegm
timerfd_gettime
timerfd_settime
timespec_get
utime
utimensat
utimes
utimes
wait3
wait4
* librt:
aio_suspend
mq_timedreceive
mq_timedsend
timer_gettime
timer_settime
* libanl:
gai_suspend
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Commit 68ab82f566 added support for the scv
syscall ABI on powerpc. Since then systems that have kernel and processor
support started using scv. However adding the proper support for a new syscall
ABI requires changes to several other projects (e.g. qemu, valgrind, strace,
kernel), which are gradually receiving support.
Meanwhile, having a way to disable scv on glibc at build time can be useful for
distros that may encounter conflicts with projects that still do not support the
scv ABI, buying time until proper support is added.
This commit adds a --disable-scv option that disables scv support and uses sc
for all syscalls, like before commit 68ab82f566.
Reviewed-by: Raphael M Zinsly <rzinsly@linux.ibm.com>
ISO C2X has made some changes to the handling of feature test macros
related to features from the floating-point TSes, and to exactly what
such features are present in what headers, that require corresponding
changes in glibc.
* For the few features that were controlled by
__STDC_WANT_IEC_60559_BFP_EXT__ (and the corresponding DFP macro) in
C2X, there is now instead a new feature test macro
__STDC_WANT_IEC_60559_EXT__ covering both binary and decimal FP.
This controls CR_DECIMAL_DIG in <float.h> (provided by GCC; I
implemented support for the new feature test macro for GCC 11) and
the totalorder and payload functions in <math.h>. C2X no longer
says anything about __STDC_WANT_IEC_60559_BFP_EXT__ (so it's
appropriate for that macro to continue to enable exactly the
features from TS 18661-1).
* The SNAN macros for each floating-point type have moved to <float.h>
(and been renamed in the process). Thus, the copies in <math.h>
should only be defined for __STDC_WANT_IEC_60559_BFP_EXT__, not for
C2X.
* The fmaxmag and fminmag functions have been removed (replaced by new
functions for the new min/max operations in IEEE 754-2019). Thus
those should also only be declared for
__STDC_WANT_IEC_60559_BFP_EXT__.
* The _FloatN / _FloatNx handling for the last two points in glibc is
trickier, since __STDC_WANT_IEC_60559_TYPES_EXT__ is still in C2X
(the integration of TS 18661-3 as an Annex, that is, which hasn't
yet been merged into the C standard git repository but has been
accepted by WG14), so C2X with that macro should not declare some
things that are declared for older standards with that macro. The
approach taken here is to provide the declarations (when
__STDC_WANT_IEC_60559_TYPES_EXT__ is enabled) only when (defined
__USE_GNU || !__GLIBC_USE (ISOC2X)), so if C2X features are enabled
then those declarations (that are only in TS 18661-3 and not in C2X)
will only be provided if _GNU_SOURCE is defined as well. Thus
_GNU_SOURCE remains a superset of the TS features as well as of C2X.
Some other somewhat related changes in C2X are not addressed here.
There's an open proposal not to include the fmin and fmax functions
for the _FloatN / _FloatNx types, given the new min/max operations,
which could be handled like the previous point if adopted. And the
fromfp functions have been changed to return a result in floating type
rather than intmax_t / uintmax_t; my inclination there is to treat
that like that change of totalorder type (new symbol versions etc. for
the ABI change; old versions become compat symbols and are no longer
supported as an API).
Tested for x86_64 and x86.
ISO C2X adds a timespec_getres function alongside the C11
timespec_get, with functionality similar to that of POSIX clock_getres
(including allowing a NULL pointer to be passed to the function).
Implement this function for glibc, similarly to the implementation of
timespec_get.
This includes a basic test like that of timespec_get, but no
documentation in the manual, given that TIME_UTC and timespec_get
aren't documented in the manual at all. The handling of 64-bit time
follows that in timespec_get; people maintaining patch series for
64-bit time will need to update them accordingly (to export
__timespec_getres64, redirect calls in time.h and run the test for
_TIME_BITS=64).
Tested for x86_64 and x86, and (previous version; only testcase
differs) with build-many-glibcs.py.
It operates similar to execve and it is is already used to implement
fexecve without requiring /proc to be mounted. However, different
than fexecve, if the syscall is not supported by the kernel an error
is returned instead of trying a fallback.
Checked on x86_64-linux-gnu and powerpc64le-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
And deprecate it in <pthread.h>, redirecting it to sched_yield
for the time being.
The symbol was moved using scripts/move-symbol-to-libc.py.
No GLIBC_2.34 symbol version is added because of the compatibility
symbol status.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Previously, glibc would pick an arbitrary tmpfs file system from
/proc/mounts if /dev/shm was not available. This could lead to
an unsuitable file system being picked for the backing storage for
shm_open, sem_open, and related functions.
This patch introduces a new function, __shm_get_name, which builds
the file name under the appropriate (now hard-coded) directory. It is
called from the various shm_* and sem_* function. Unlike the
SHM_GET_NAME macro it replaces, the callers handle the return values
and errno updates. shm-directory.c is moved directly into the posix
subdirectory because it can be implemented directly using POSIX
functionality. It resides in libc because it is needed by both
librt and nptl/htl.
In the sem_open implementation, tmpfname is initialized directly
from a string constant. This happens to remove one alloca call.
Checked on x86_64-linux-gnu.
Add _SC_MINSIGSTKSZ for the minimum signal stack size derived from
AT_MINSIGSTKSZ, which is the minimum number of bytes of free stack
space required in order to gurantee successful, non-nested handling
of a single signal whose handler is an empty function, and _SC_SIGSTKSZ
which is the suggested minimum number of bytes of stack space required
for a signal stack.
If AT_MINSIGSTKSZ isn't available, sysconf (_SC_MINSIGSTKSZ) returns
MINSIGSTKSZ. On Linux/x86 with XSAVE, the signal frame used by kernel
is composed of the following areas and laid out as:
------------------------------
| alignment padding |
------------------------------
| xsave buffer |
------------------------------
| fsave header (32-bit only) |
------------------------------
| siginfo + ucontext |
------------------------------
Compute AT_MINSIGSTKSZ value as size of xsave buffer + size of fsave
header (32-bit only) + size of siginfo and ucontext + alignment padding.
If _SC_SIGSTKSZ_SOURCE or _GNU_SOURCE are defined, MINSIGSTKSZ and SIGSTKSZ
are redefined as
/* Default stack size for a signal handler: sysconf (SC_SIGSTKSZ). */
# undef SIGSTKSZ
# define SIGSTKSZ sysconf (_SC_SIGSTKSZ)
/* Minimum stack size for a signal handler: SIGSTKSZ. */
# undef MINSIGSTKSZ
# define MINSIGSTKSZ SIGSTKSZ
Compilation will fail if the source assumes constant MINSIGSTKSZ or
SIGSTKSZ.
The reason for not simply increasing the kernel's MINSIGSTKSZ #define
(apart from the fact that it is rarely used, due to glibc's shadowing
definitions) was that userspace binaries will have baked in the old
value of the constant and may be making assumptions about it.
For example, the type (char [MINSIGSTKSZ]) changes if this #define
changes. This could be a problem if an newly built library tries to
memcpy() or dump such an object defined by and old binary.
Bounds-checking and the stack sizes passed to things like sigaltstack()
and makecontext() could similarly go wrong.
I've updated copyright dates in glibc for 2021. This is the patch for
the changes not generated by scripts/update-copyrights and subsequent
build / regeneration of generated files. As well as the usual annual
updates, mainly dates in --version output (minus csu/version.c which
previously had to be handled manually but is now successfully updated
by update-copyrights), there is a small change to the copyright notice
in NEWS which should let NEWS get updated automatically next year.
Please remember to include 2021 in the dates for any new files added
in future (which means updating any existing uncommitted patches you
have that add new files to use the new copyright dates in them).
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
Introduce a new _FORTIFY_SOURCE level of 3 to enable additional
fortifications that may have a noticeable performance impact, allowing
more fortification coverage at the cost of some performance.
With llvm 9.0 or later, this will replace the use of
__builtin_object_size with __builtin_dynamic_object_size.
__builtin_dynamic_object_size
-----------------------------
__builtin_dynamic_object_size is an LLVM builtin that is similar to
__builtin_object_size. In addition to what __builtin_object_size
does, i.e. replace the builtin call with a constant object size,
__builtin_dynamic_object_size will replace the call site with an
expression that evaluates to the object size, thus expanding its
applicability. In practice, __builtin_dynamic_object_size evaluates
these expressions through malloc/calloc calls that it can associate
with the object being evaluated.
A simple motivating example is below; -D_FORTIFY_SOURCE=2 would miss
this and emit memcpy, but -D_FORTIFY_SOURCE=3 with the help of
__builtin_dynamic_object_size is able to emit __memcpy_chk with the
allocation size expression passed into the function:
void *copy_obj (const void *src, size_t alloc, size_t copysize)
{
void *obj = malloc (alloc);
memcpy (obj, src, copysize);
return obj;
}
Limitations
-----------
If the object was allocated elsewhere that the compiler cannot see, or
if it was allocated in the function with a function that the compiler
does not recognize as an allocator then __builtin_dynamic_object_size
also returns -1.
Further, the expression used to compute object size may be non-trivial
and may potentially incur a noticeable performance impact. These
fortifications are hence enabled at a new _FORTIFY_SOURCE level to
allow developers to make a choice on the tradeoff according to their
environment.
GCC 6.5 fails to correctly build ldconfig with recent ld.so.cache
commits, e.g.:
785969a047
elf: Implement a string table for ldconfig, with tail merging
If glibc is build with gcc 6.5.0:
__builtin_add_overflow is used in
<glibc>/elf/stringtable.c:stringtable_finalize()
which leads to ldconfig failing with "String table is too large".
This is also recognizable in following tests:
FAIL: elf/tst-glibc-hwcaps-cache
FAIL: elf/tst-glibc-hwcaps-prepend-cache
FAIL: elf/tst-ldconfig-X
FAIL: elf/tst-ldconfig-bad-aux-cache
FAIL: elf/tst-ldconfig-ld_so_conf-update
FAIL: elf/tst-stringtable
See gcc "Bug 98269 - gcc 6.5.0 __builtin_add_overflow() with small
uint32_t values incorrectly detects overflow"
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98269)
float_t supposedly represents the type that is used to evaluate float
expressions internally. While the isa supports single-precision float
operations, the port of glibc to s390 incorrectly deferred to the
generic definitions which, back then, tied float_t to double. gcc by
default evaluates float in single precision, so that scenario violates
the C standard (sections 5.2.4.2.2 and 7.12 in C11/C17). With
-fexcess-precision=standard, gcc evaluates float in double precision,
which aligns with the standard yet at the cost of added conversion
instructions.
With this patch, we drop the s390-specific definition of float_t and
defer to the default behavior, which aligns float_t with the
compiler-defined FLT_EVAL_METHOD in a standard-compliant way.
Checked on s390x-linux-gnu with 31-bit and 64-bit builds.
The IBM1364, IBM1371, IBM1388, IBM1390 and IBM1399 character sets
share converter logic (iconvdata/ibm1364.c) which would reject
redundant shift sequences when processing input in these character
sets. This led to a hang in the iconv program (CVE-2020-27618).
This commit adjusts the converter to ignore redundant shift sequences
and adds test cases for iconv_prog hangs that would be triggered upon
their rejection. This brings the implementation in line with other
converters that also ignore redundant shift sequences (e.g. IBM930
etc., fixed in commit 692de4b396).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
I couldn't pinpoint which standard has added it, but no other POSIX
system supports it and/or no longer provide it. The 'struct vtimes'
also has a lot of drawbacks due its limited internal type size.
I couldn't also see find any project that actually uses this symbol,
either in some dignostic way (such as sanitizer). So I think it should
be safer to just move to compat symbol, instead of deprecated. The
idea it to avoid new ports to export such broken interface (riscv32
for instance).
Checked on x86_64-linux-gnu and i686-linux-gnu.
This functionality does not seem to be useful since static dlopen
is mostly used for iconv/character set conversion and NSS support.
gconv modules are loaded with full paths anyway, so that the
HWCAP subdirectory logic does not apply.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Current systems do not have BSD terminals, so the fallback code in
posix_openpt/getpt does not do anything. Also remove the file system
check for /dev/pts. Current systems always have a devpts file system
mounted there if /dev/ptmx exists.
grantpt is now essentially a no-op. It only verifies that the
argument is a ptmx-descriptor. Therefore, this change indirectly
addresses bug 24941.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch adds the ABI-related bits to reflect the new mallinfo2
function, and adds a test case to verify basic functionality.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Install <sys/platform/x86.h> so that programmers can do
#if __has_include(<sys/platform/x86.h>)
#include <sys/platform/x86.h>
#endif
...
if (CPU_FEATURE_USABLE (SSE2))
...
if (CPU_FEATURE_USABLE (AVX2))
...
<sys/platform/x86.h> exports only:
enum
{
COMMON_CPUID_INDEX_1 = 0,
COMMON_CPUID_INDEX_7,
COMMON_CPUID_INDEX_80000001,
COMMON_CPUID_INDEX_D_ECX_1,
COMMON_CPUID_INDEX_80000007,
COMMON_CPUID_INDEX_80000008,
COMMON_CPUID_INDEX_7_ECX_1,
/* Keep the following line at the end. */
COMMON_CPUID_INDEX_MAX
};
struct cpuid_features
{
struct cpuid_registers cpuid;
struct cpuid_registers usable;
};
struct cpu_features
{
struct cpu_features_basic basic;
struct cpuid_features features[COMMON_CPUID_INDEX_MAX];
};
/* Get a pointer to the CPU features structure. */
extern const struct cpu_features *__x86_get_cpu_features
(unsigned int max) __attribute__ ((const));
Since all feature checks are done through macros, programs compiled with
a newer <sys/platform/x86.h> are compatible with the older glibc binaries
as long as the layout of struct cpu_features is identical. The features
array can be expanded with backward binary compatibility for both .o and
.so files. When COMMON_CPUID_INDEX_MAX is increased to support new
processor features, __x86_get_cpu_features in the older glibc binaries
returns NULL and HAS_CPU_FEATURE/CPU_FEATURE_USABLE return false on the
new processor feature. No new symbol version is neeeded.
Both CPU_FEATURE_USABLE and HAS_CPU_FEATURE are provided. HAS_CPU_FEATURE
can be used to identify processor features.
Note: Although GCC has __builtin_cpu_supports, it only supports a subset
of <sys/platform/x86.h> and it is equivalent to CPU_FEATURE_USABLE. It
doesn't support HAS_CPU_FEATURE.
There is already RISC-V 64-bit port information in the documentation.
Let's add some documentation entries for the RISC-V 32-bit as well.
Reviewed-by: Maciej W. Rozycki <macro@wdc.com>
After some discussions it seems the original news was not clear
and that it is valid to manually pass the branch protection flags
iff GCC target libs are built with them too. The main difference
between manually passing the flags and using the configure
option is that the latter also makes branch protection the
default in GCC which may not be desirable in some cases.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was fixed in commit d937694059
("Fix array overflow in backtrace on PowerPC (bug 25423)"), which
went into glibc 2.31.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Storing user databases in DNS, without client-side DNSSEC validation,
is problematic from a security point of view.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The kernel ABI is not finalized, and there are now various proposals
to change the size of struct rseq, which would make the glibc ABI
dependent on the version of the kernels used for building glibc.
This is of course not acceptable.
This reverts commit 48699da1c4 ("elf:
Support at least 32-byte alignment in static dlopen"), commit
8f4632deb3 ("Linux: rseq registration
tests"), commit 6e29cb3f61 ("Linux: Use
rseq in sched_getcpu if available"), and commit
0c76fc3c2b ("Linux: Perform rseq
registration at C startup and thread creation"), resolving the conflicts
introduced by the ARC port and the TLS static surplus changes.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Sun RPC was removed from glibc. This includes rpcgen program, librpcsvc,
and Sun RPC headers. Also test for bug #20790 was removed
(test for rpcgen).
Backward compatibility for old programs is kept only for architectures
and ABIs that have been added in or before version 2.28.
libtirpc is mature enough, librpcsvc and rpcgen are provided in
rpcsvc-proto project.
NOTE: libnsl code depends on Sun RPC (installed libnsl headers use
installed Sun RPC headers), thus --enable-obsolete-rpc was a dependency
for --enable-obsolete-nsl (removed in a previous commit).
The arc ABI list file has to be updated because the port was added
with the sunrpc symbols
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
__morecore, __after_morecore_hook, and __default_morecore had not
been deprecated in commit 7d17596c19
("Mark malloc hook variables as deprecated"), probably by accident.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Unicode 13.0.0 Support: Character encoding, character type info, and
transliteration tables are all updated to Unicode 13.0.0, using
the generator scripts contributed by Mike FABIAN (Red Hat).
Total added characters in newly generated CHARMAP: 5930
Total added characters in newly generated WIDTH: 5536
this means that *always* libnsl is only built as shared library for
backward compatibility and the NSS modules libnss_nis and libnss_nisplus
are not built at all, libnsl's headers aren't installed.
This compatibility is kept only for architectures and ABIs that have
been added in or before version 2.28.
Replacement implementations based on TIRPC, which additionally support
IPv6, are available from <https://github.com/thkukuk/>.
This change does not affect libnss_compat which does not depended
on libnsl since 2.27 and thus can be used without NIS.
libnsl code depends on Sun RPC, e.g. on --enable-obsolete-rpc (installed
libnsl headers use installed Sun RPC headers), which will be removed in
the following commit.
The interface has hard-coded buffer sizes and is therefore tied to
DES. It also does not match current practice where different
services on the same host use different key material.
This change simplifies removal of the sunrpc code.
The strerrorname_np returns error number name (e.g. "EINVAL" for EINVAL)
while strerrordesc_np returns string describing error number (e.g
"Invalid argument" for EINVAL). Different than strerror,
strerrordesc_np does not attempt to translate the return description,
both functions return NULL for an invalid error number.
They should be used instead of sys_errlist and sys_nerr, both are
thread and async-signal safe. These functions are GNU extensions.
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The sigabbrev_np returns the abbreviated signal name (e.g. "HUP" for
SIGHUP) while sigdescr_np returns the string describing the error
number (e.g "Hangup" for SIGHUP). Different than strsignal,
sigdescr_np does not attempt to translate the return description and
both functions return NULL for an invalid signal number.
They should be used instead of sys_siglist or sys_sigabbrev and they
are both thread and async-signal safe. They are added as GNU
extensions on string.h header (same as strsignal).
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
If the thread is terminated then __libc_thread_freeres will free the
storage via __glibc_tls_internal_free.
It is only within the calling thread that this matters. It makes
strerror MT-safe.
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The symbol is deprecated by strerror since its usage imposes some issues
such as copy relocations.
Its internal name is also changed to _sys_errlist_internal to avoid
static linking usage. The compat code is also refactored by removing
the over enginered errlist-compat.c generation from manual entried and
extra comment token in linker script file. It disantangle the code
generation from manual and simplify both Linux and Hurd compat code.
The definitions from errlist.c are moved to errlist.h and a new test
is added to avoid a new errno entry without an associated one in manual.
Checked on x86_64-linux-gnu and i686-linux-gnu. I also run a check-abi
on all affected platforms.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The symbol was deprecated by strsignal and its usage imposes issues
such as copy relocations.
Its internal name is changed to __sys_siglist and __sys_sigabbrev to
avoid static linking usage. The compat code is also refactored, since
both Linux and Hurd usage the same strategy: export the same array with
different object sizes.
The libSegfault change avoids calling strsignal on the SIGFAULT signal
handler (the current usage is already sketchy, adding a call that
potentially issue locale internal function is even sketchier).
Checked on x86_64-linux-gnu and i686-linux-gnu. I also run a check-abi
on all affected platforms.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The variable is placed in libc.so, and it can be true only in
an outer libc, not libcs loaded via dlmopen or static dlopen.
Since thread creation from inner namespaces does not work,
pthread_create can update __libc_single_threaded directly.
Using __libc_early_init and its initial flag, implementation of this
variable is very straightforward. A future version may reset the flag
during fork (but not in an inner namespace), or after joining all
threads except one.
Reviewed-by: DJ Delorie <dj@redhat.com>
Register rseq TLS for each thread (including main), and unregister for
each thread (excluding main). "rseq" stands for Restartable Sequences.
See the rseq(2) man page proposed here:
https://lkml.org/lkml/2018/9/19/647
Those are based on glibc master branch commit 3ee1e0ec5c.
The rseq system call was merged into Linux 4.18.
The TLS_STATIC_SURPLUS define is increased to leave additional room for
dlopen'd initial-exec TLS, which keeps elf/tst-auditmany working.
The increase (76 bytes) is larger than 32 bytes because it has not been
increased in quite a while. The cost in terms of additional TLS storage
is quite significant, but it will also obscure some initial-exec-related
dlopen failures.
This needs a few test adjustments: In some cases, sigignore was
used for convenience (replaced with xsignal with SIG_IGN). Tests
for the deprecated functions need to disable
-Wdeprecated-declarations, and for the sigmask deprecation,
-Wno-error.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
On platforms where long double may have two different formats, i.e.: the
same format as double (64-bits) or something else (128-bits), building
with -mlong-double-128 is the default and function calls in the user
program match the name of the function in Glibc. When building with
-mlong-double-64, Glibc installed headers redirect such calls to the
appropriate function.
Likewise, the internals of glibc are now built against IEEE long double.
However, the only (minimally) notable usage of long double is difftime.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Add compiler feature tests to ensure we can build ieee128 long double.
These test for -mabi=ieeelongdouble, -mno-gnu-attribute, and -Wno-psabi.
Likewise, verify some compiler bugs have been addressed. These aren't
helpful for building glibc, but may cause test failures when testing
the new long double. See notes below from Raji.
On powerpc64le, some older compiler versions give error for the function
signbit() for 128-bit floating point types. This is fixed by PR83862
in gcc 8.0 and backported to gcc6 and gcc7. This patch adds a test
to check compiler version to avoid compiler errors during make check.
Likewise, test for -mno-gnu-attribute support which was
On powerpc64le, a few files are built on IEEE long double mode
(-mabi=ieeelongdouble), whereas most are built on IBM long double mode
(-mabi=ibmlongdouble, the default for -mlong-double-128). Since binutils
2.31, linking object files with different long double modes causes
errors similar to:
ld: libc_pic.a(s_isinfl.os) uses IBM long double,
libc_pic.a(ieee128-qefgcvt.os) uses IEEE long double.
collect2: error: ld returned 1 exit status
make[2]: *** [../Makerules:649: libc_pic.os] Error 1
The warnings are fair and correct, but in order for glibc to have
support for both long double modes on powerpc64le, they have to be
ignored. This can be accomplished with the use of -mno-gnu-attribute
option when building the few files that require IEEE long double mode.
However, -mno-gnu-attribute is not available in GCC 6, the minimum
version required to build glibc, so this patch adds a test for this
feature in powerpc64le builds, and fails early if it's not available.
Co-Authored-By: Rajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com>
Co-Authored-By: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
This change should not have an effect because the system call was
never defined. Also add the misssing attribute_compat_text_section
attribute to the sstk function (a minor optimization). Also update the
NEWS file to document the change.
Fixes commit 9cc93ba097
("misc: Turn sstk into a compat symbol").
Unicode 13.0.0 Support: Character encoding, character type info, and
transliteration tables are all updated to Unicode 13.0.0, using
the generator scripts contributed by Mike FABIAN (Red Hat).
Total added characters in newly generated CHARMAP: 5930
Total added characters in newly generated WIDTH: 5536
Linux 5.5 remove the system call in commit
61a47c1ad3a4dc6882f01ebdc88138ac62d0df03 ("Linux: Remove
<sys/sysctl.h>"). Therefore, the compat function is just a stub that
sets ENOSYS.
Due to SHLIB_COMPAT, new ports will not add the sysctl function anymore
automatically.
x32 already lacks the sysctl function, so an empty sysctl.c file is
used to suppress it. Otherwise, a new compat symbol would be added.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
binutils ld has supported --audit, --depaudit for a long time,
only support in glibc has been missing.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Match up with list-fixed-bugs.py and also with the fact that many
email clients default to 72 chars when composing emails.
Reviewed-by: Joseph Myers <joseph@codesourcery.com>
This internal change ideally should not affect the public API or ABI,
but there is a widespread use of seccomp sandboxes, even on 32-bit
targets, that don't handle new Linux syscall usage well, so it's
worth mentioning in the NEWS.
Co-authored-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The change was introduced in:
commit 33bc9efd91
Author: Dragan Mladjenovic <dmladjenovic@wavecomp.com>
Date: Fri Aug 23 16:38:04 2019 +0000
mips: Force RWX stack for hard-float builds that can run on pre-4.8 kernels
and probably requires a small explanation.
Co-authored-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Mostly English grammar and style improvements. The bullet list is
reorganized a little for clarity. The details of exactly which
Linux-based ports still report system-wide time zone information
from gettimeofday has been removed, as this is not intended to be
something people should rely on.
Also clarify the deprecation of older SPARC ISAs, based on the fact
that “SPARC version 7” is actually the very first version of the SPARC
ISA (Sun Microsystems was very fond of letting the marketing
department pick version numbers).
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
We no longer write manual ChangeLog entries since they are
auto-generated at release time. Drop dependency of the `make dist`
target on the file and document the fact that the latest ChangeLog
entries can be read in the highest numbered ChangeLog.N file in
ChangeLog.old.
The ChangeLog.old/ChangeLog.20 file for 2.31 will thus be generated
just before tagging a release.
Reviewed-by: Paul Eggert <eggert@cs.ucla.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Use <arch-syscall.h> instead of <asm/unistd.h> to obtain the system
call numbers. A few direct includes of <asm/unistd.h> need to be
removed (if the system call numbers are already provided indirectly
by <sysdep.h>) or replaced with <sys/syscall.h>.
Current Linux headers for alpha define the required system call names,
so most of the _NR_* hacks are no longer needed. For the 32-bit arm
architecture, eliminate the INTERNAL_SYSCALL_ARM macro, now that we
have regular system call names for cacheflush and set_tls. There are
more such cleanup opportunities for other architectures, but these
cleanups are required to avoid macro redefinition errors during the
build.
For ia64, it is desirable to use <asm/break.h> directly to obtain
the break number for system calls (which is not a system call number
itself). This requires replacing __BREAK_SYSCALL with
__IA64_BREAK_SYSCALL because the former is defined as an alias in
<asm/unistd.h>, but not in <asm/break.h>.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
I've updated copyright dates in glibc for 2020. This is the patch for
the changes not generated by scripts/update-copyrights and subsequent
build / regeneration of generated files. As well as the usual annual
updates, mainly dates in --version output (minus libc.texinfo which
previously had to be handled manually but is now successfully updated
by update-copyrights), there is a fix to
sysdeps/unix/sysv/linux/powerpc/bits/termios-c_lflag.h where a typo in
the copyright notice meant it failed to be updated automatically.
Please remember to include 2020 in the dates for any new files added
in future (which means updating any existing uncommitted patches you
have that add new files to use the new copyright dates in them).
If a lazy binding failure happens during the execution of an ELF
constructor or destructor, the dynamic loader catches the error
and reports it using the dlerror mechanism. This is undesirable
because there could be other constructors and destructors that
need processing (which are skipped), and the process is in an
inconsistent state at this point. Therefore, we have to issue
a fatal dynamic loader error error and terminate the process.
Note that the _dl_catch_exception in _dl_open is just an inner catch,
to roll back some state locally. If called from dlopen, there is
still an outer catch, which is why calling _dl_init via call_dl_init
and a no-exception is required and cannot be avoiding by moving the
_dl_init call directly into _dl_open.
_dl_fini does not need changes because it does not install an error
handler, so errors are already fatal there.
Change-Id: I6b1addfe2e30f50a1781595f046f44173db9491a
This introduces a concept of trusted name servers, for which the
AD bit is passed through to applications. For untrusted name
servers (the default), the AD bit in responses are cleared, to
provide a safe default.
This approach is very similar to the one suggested by Pavel Šimerda
in <https://bugzilla.redhat.com/show_bug.cgi?id=1164339#c15>.
The DNS test framework in support/ is enhanced with support for
setting the AD bit in responses.
Tested on x86_64-linux-gnu.
Change-Id: Ibfe0f7c73ea221c35979842c5c3b6ed486495ccc
The patch is straighforward:
- The sparc32 v8 implementations are moved as the generic ones.
- A configure test is added to check for either __sparc_v8__ or
__sparc_v9__.
- The triple names are simplified and sparc implies sparcv8.
The idea is to keep support on sparcv8 architectures that does support
CAS instructions, such as LEON3/LEON4.
Checked on a sparcv9-linux-gnu and sparc64-linux-gnu.
Tested-by: Andreas Larsson <andreas@gaisler.com>
Introduce pthread_clockjoin_np as a version of pthread_timedjoin_np that
accepts a clockid_t parameter to indicate which clock the timeout should be
measured against. This mirrors the recently-added POSIX-proposed "clock"
wait functions.
Checked on x86_64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Consolidate generic gettimeofday implementation to use clock_gettime.
Linux ports that still provide gettimeofday through vDSO are not
changed.
Remove sysdeps/unix/clock_gettime.c, which implemented clock_gettime
using gettimeofday; new OS ports must provide a real implementation of
clock_gettime.
Rename sysdeps/mach/gettimeofday.c to sysdeps/mach/clock_gettime.c and
convert into an implementation of clock_gettime. It only supports
CLOCK_REALTIME; Mach does not appear to have any support for monotonic
clocks. It uses __host_get_time, which provides at best microsecond
resolution. Hurd is currently using sysdeps/posix/clock_getres.c for
clock_getres; its output for CLOCK_REALTIME is based on
sysconf (_SC_CLK_TCK), and I do not know whether that gives the
correct result.
Unlike settimeofday, there are no known uses of gettimeofday's
vestigial "get time zone" feature that are not bugs. (The per-process
timezone support in localtime and friends is unrelated, and the
programs that set the kernel's offset between the hardware clock and
UTC do not need to read it back.) Therefore, this feature is dummied
out. Henceforth, if gettimeofday's "struct timezone" argument is not
NULL, it will write zeroes to both fields. Any program that is
actually looking at this data will thus think it is running in UTC,
which is probably more correct than whatever it was doing before.
[__]gettimeofday no longer has any internal callers, so we can now
remove its internal prototype and PLT bypass aliases. The
__gettimeofday@GLIBC_2.0 export remains, in case it is used by any
third-party code.
It also allows to simplify the arch-specific implementation on x86 and
powerpc to remove the hack to disable the internal route to non iFUNC
variant for internal symbol.
This patch also fixes a missing optimization on aarch64, powerpc, and
x86 where the code used on static build do not use the vDSO.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Co-authored-by: Zack Weinberg <zackw@panix.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
ftime is an obsolete variation on gettimeofday, offering only
millisecond time resolution; it was probably a system call in ooold
versions of BSD Unix. For historic reasons, we had three
implementations of it. These are all consolidated into time/ftime.c,
and then the function is deprecated.
For some reason, the implementation of ftime in terms of gettimeofday
was rounding rather than truncating microseconds to milliseconds. In
all the other places where we use a higher-resolution time function to
implement a lower-resolution one, we truncate. ftime is changed to
match, just for tidiness' sake.
Like gettimeofday, ftime tries to report the time zone, and using that
information is always a bug. This patch dummies out the reported
timezone information; the timezone and dstflag fields of the
returned "struct timeb" will always be zero.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, and powerpc-linux-gnu.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Unconditionally, on all ports, use clock_settime to implement
settimeofday. Remove sysdeps/unix/clock_settime.c, which implemented
clock_settime by calling settimeofday; new OS ports must henceforth
provide a real implementation of clock_settime.
Hurd had a real implementation of settimeofday but not of
clock_settime; this patch converts it into an implementation of
clock_settime. It only supports CLOCK_REALTIME and microsecond
resolution; Hurd/Mach does not appear to have any support for
finer-resolution clocks.
The vestigial "set time zone" feature of settimeofday complicates the
generic settimeofday implementation a little. The only remaining uses
of this feature that aren't just bugs, are using it to inform the
Linux kernel of the offset between the hardware clock and UTC, on
systems where the hardware clock doesn't run in UTC (usually because
of dual-booting with Windows). There currently isn't any other way to
do this. However, the callers that do this call settimeofday with
_only_ the timezone argument non-NULL. Therefore, glibc's new
behavior is: callers of settimeofday must supply one and only one of
the two arguments. If both arguments are non-NULL, or both arguments
are NULL, the call fails and sets errno to EINVAL.
When only the timeval argument is supplied, settimeofday calls
__clock_settime(CLOCK_REALTIME), same as stime.
When only the timezone argument is supplied, settimeofday calls a new
internal function called __settimezone. On Linux, only, this function
will pass the timezone structure to the settimeofday system call. On
all other operating systems, and on Linux architectures that don't
define __NR_settimeofday, __settimezone is a stub that always sets
errno to ENOSYS and returns -1.
The settimeoday syscall is enabled on Linux by the flag
COMPAT_32BIT_TIME, which is an option to either 32-bits ABIs or COMPAT
builds (defined usually by 64-bit kernels that want to support 32-bit
ABIs, such as x86). The idea to future 64-bit time_t only ABIs
is to not provide settimeofday syscall.
The same semantics are implemented for Linux/Alpha's GLIBC_2.0 compat
symbol for settimeofday.
There are no longer any internal callers of __settimeofday, so the
internal prototype is removed.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Unconditionally, on all ports, use clock_settime to implement stime,
not settimeofday or a direct syscall. Then convert stime into a
compatibility symbol and remove its prototype from time.h.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
When adding some of the TS 18661 narrowing functions for glibc 2.28, I
deferred adding corresponding <tgmath.h> support because of unresolved
questions about the specification for those type-generic macros,
especially in relation to _FloatN and _FloatNx types.
Those issues are now clarified in the response to Clarification
Request 13 to TS 18661-3, and this patch adds the deferred tgmath.h
support. As with other tgmath.h macros, there are fairly
straightforward implementations based on __builtin_tgmath for GCC 8
and later, which result in exactly the right function being called in
each case, and more complicated implementations for GCC 7 and earlier,
which generally result in a function being called whose arguments have
the right format (i.e. an alias for the right function), but which
might not be exactly the function name specified by TS 18661.
In one case with older compilers (f32x* macros, where the type
_Float64x exists and all the arguments have type _Float32 or
_Float32x), there is a further relaxation and the function called may
have arguments narrower than the one specified by the TS, but still
wide enough to represent the arguments exactly, so the result of the
call is unchanged (as this does not affect any case where rounding of
integer arguments might be involved). With GCC 6 or before this is
inherently unavoidable (but still harmless and not detectable by how
the compiled program behaves, unless it redefines the functions in
question like the testcases do) because _Float32x and _Float64 are
both typedefs for double in that case but the specified semantics
result in different functions, with different argument formats, being
called for those two argument types.
Tests for the new macros are handled through gen-tgmath-tests.py,
which deals with the special-case handling for older GCC.
Tested as follows: with the full glibc testsuite on x86_64 and x86
(with GCC 6, 7 and 8); with the math/ tests on aarch64 and arm (with
GCC 6, 7 and 8); with build-many-glibcs.py (with GCC 6, 7 and 9).
* math/tgmath.h [__HAVE_FLOAT128X]: Give error.
[(__HAVE_FLOAT64X && !__HAVE_FLOAT128)
|| (__HAVE_FLOAT128 && !__HAVE_FLOAT64X)]: Likewise.
(__TGMATH_2_NARROW_F): Likewise.
(__TGMATH_2_NARROW_D): New macro.
(__TGMATH_2_NARROW_F16): Likewise.
(__TGMATH_2_NARROW_F32): Likewise.
(__TGMATH_2_NARROW_F64): Likewise.
(__TGMATH_2_NARROW_F32X): Likewise.
(__TGMATH_2_NARROW_F64X): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_NARROW_FUNCS_F): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_NARROW_FUNCS_F16): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_NARROW_FUNCS_F32): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_NARROW_FUNCS_F64): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_NARROW_FUNCS_F32X): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (fadd): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (dadd): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (fdiv): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (ddiv): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (fmul): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (dmul): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (fsub): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (dsub): Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT16] (f16add):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT16] (f16div):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT16] (f16mul):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT16] (f16sub):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32] (f32add):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32] (f32div):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32] (f32mul):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32] (f32sub):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64
&& (__HAVE_FLOAT64X || __HAVE_FLOAT128)] (f64add): Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64
&& (__HAVE_FLOAT64X || __HAVE_FLOAT128)] (f64div): Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64
&& (__HAVE_FLOAT64X || __HAVE_FLOAT128)] (f64mul): Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64
&& (__HAVE_FLOAT64X || __HAVE_FLOAT128)] (f64sub): Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32X] (f32xadd):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32X] (f32xdiv):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32X] (f32xmul):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32X] (f32xsub):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64X
&& (__HAVE_FLOAT128X || __HAVE_FLOAT128)] (f64xadd): Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64X
&& (__HAVE_FLOAT128X || __HAVE_FLOAT128)] (f64xdiv): Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64X
&& (__HAVE_FLOAT128X || __HAVE_FLOAT128)] (f64xmul): Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64X
&& (__HAVE_FLOAT128X || __HAVE_FLOAT128)] (f64xsub): Likewise.
* math/gen-tgmath-tests.py (Type): Add members
non_standard_real_argument_types_list, long_double_type,
complex_float64_type and float32x_ext_type.
(Type.__init__): Set the new members.
(Type.floating_type): Add new argument floatn.
(Type.real_floating_type): Likewise.
(Type.can_combine_types): Likewise.
(Type.combine_types): Likewise.
(Type.init_types): Create internal Float32x_ext type.
(Tests.__init__): Define Float32x_ext in generated C code.
(Tests.add_tests): Handle narrowing functions.
(Tests.add_all_tests): Likewise.
(Tests.tests_text): Allow variation in mant_dig for narrowing
functions with compilers before GCC 8.
* math/Makefile (tgmath3-narrow-types): New variable.
(tgmath3-narrow-macros): Likewise.
(tgmath3-macros): Add $(tgmath3-narrow-macros).
The resolution of C floating-point Clarification Request 25
<http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2397.htm#dr_25> is
that the totalorder and totalordermag functions should take pointer
arguments, and this has been adopted in C2X (with const added; note
that the integration of this change into C2X is present in the C
standard git repository but postdates the most recent public PDF
draft).
This patch updates glibc accordingly. As a defect resolution, the API
is changed unconditionally rather than supporting any sort of TS
18661-1 mode for compilation with the old version of the API. There
are compat symbols for existing binaries that pass floating-point
arguments directly. As a consequence of changing to pointer
arguments, there are no longer type-generic macros in tgmath.h for
these functions.
Because of the fairly complicated logic for creating libm function
aliases and determining the set of aliases to create in a given glibc
configuration, rather than duplicating all that in individual source
files to create the versioned and compat symbols, the source files for
the various versions of totalorder functions are set up to redefine
weak_alias before using libm_alias_* macros to create the symbols
required. In turn, this requires creating a separate alias for each
symbol version pointing to the same implementation (see binutils bug
<https://sourceware.org/bugzilla/show_bug.cgi?id=23840>), which is
done automatically using __COUNTER__. (As I noted in
<https://sourceware.org/ml/libc-alpha/2018-10/msg00631.html>, it might
well make sense for glibc's symbol versioning macros to do that alias
creation with __COUNTER__ themselves, which would somewhat simplify
the logic in the totalorder source files.)
It is of course desirable to test the compat symbols. I did this with
the generic libm-test machinery, but didn't wish to duplicate the
actual tables of test inputs and outputs, and thought it risky to
attempt to have a single object file refer to both default and compat
versions of the same function in order to test them together. Thus, I
created libm-test-compat_totalorder.inc and
libm-test-compat_totalordermag.inc which include the generated .c
files (with the processed version of those tables of inputs) from the
non-compat tests, and added appropriate dependencies. I think this
provides sufficient test coverage for the compat symbols without also
needing to make the special ldbl-96 and ldbl-128ibm tests (of
peculiarities relating to the representations of those formats that
can't be covered in the generic tests) run for the compat symbols.
Tests of compat symbols need to be internal tests, meaning _ISOMAC is
not defined. Making some libm-test tests into internal tests showed
up two other issues. GCC diagnoses duplicate macro definitions of
__STDC_* macros, including __STDC_WANT_IEC_60559_TYPES_EXT__; I added
an appropriate conditional and filed
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=91451> for this issue.
On ia64, include/setjmp.h ends up getting included indirectly from
libm-symbols.h, resulting in conflicting definitions of the STR macro
(also defined in libm-test-driver.c); I renamed the macros in
include/setjmp.h. (It's arguable that we should have common internal
headers used everywhere for stringizing and concatenation macros.)
Tested for x86_64 and x86, and with build-many-glibcs.py.
* math/bits/mathcalls.h
[__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN]
(totalorder): Take pointer arguments.
[__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN]
(totalordermag): Likewise.
* manual/arith.texi (totalorder): Likewise.
(totalorderf): Likewise.
(totalorderl): Likewise.
(totalorderfN): Likewise.
(totalorderfNx): Likewise.
(totalordermag): Likewise.
(totalordermagf): Likewise.
(totalordermagl): Likewise.
(totalordermagfN): Likewise.
(totalordermagfNx): Likewise.
* math/tgmath.h (__TGMATH_BINARY_REAL_RET_ONLY): Remove macro.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag): Likewise.
* math/Versions (GLIBC_2.31): Add totalorder, totalorderf,
totalorderl, totalordermag, totalordermagf, totalordermagl,
totalorderf32, totalorderf64, totalorderf32x, totalordermagf32,
totalordermagf64, totalordermagf32x, totalorderf64x,
totalordermagf64x, totalorderf128 and totalordermagf128.
* math/Makefile (libm-test-funcs-noauto): Add compat_totalorder
and compat_totalordermag.
(libm-test-funcs-compat): New variable.
(libm-tests-compat): Likewise.
(tests): Do not include compat tests.
(tests-internal): Add compat tests.
($(foreach t,$(libm-tests-base),
$(objpfx)$(t)-compat_totalorder.o)): Depend
on $(objpfx)libm-test-totalorder.c.
($(foreach t,$(libm-tests-base),
$(objpfx)$(t)-compat_totalordermag.o): Depend on
$(objpfx)libm-test-totalordermag.c.
(tgmath3-macros): Remove totalorder and totalordermag.
* math/libm-test-compat_totalorder.inc: New file.
* math/libm-test-compat_totalordermag.inc: Likewise.
* math/libm-test-driver.c (struct test_ff_i_data): Update comment.
(RUN_TEST_fpfp_b): New macro.
(RUN_TEST_LOOP_fpfp_b): Likewise.
* math/libm-test-totalorder.inc (totalorder_test_data): Use
TEST_fpfp_b.
(totalorder_test): Condition on [!COMPAT_TEST].
(do_test): Likewise.
* math/libm-test-totalordermag.inc (totalordermag_test_data): Use
TEST_fpfp_b.
(totalordermag_test): Condition on [!COMPAT_TEST].
(do_test): Likewise.
* math/gen-tgmath-tests.py (Tests.add_all_tests): Remove
totalorder and totalordermag.
* math/test-tgmath.c (NCALLS): Change to 132.
(F(compile_test)): Do not call totalorder or totalordermag.
(F(totalorder)): Remove.
(F(totalordermag)): Likewise.
* include/float.h (__STDC_WANT_IEC_60559_TYPES_EXT__): Do not
define if [__STDC_WANT_IEC_60559_TYPES_EXT__].
* include/setjmp.h [!_ISOMAC] (STR_HELPER): Rename to
SJSTR_HELPER.
[!_ISOMAC] (STR): Rename to SJSTR. Update call to STR_HELPER.
[!_ISOMAC] (TEST_SIZE): Update call to STR.
[!_ISOMAC] (TEST_ALIGN): Likewise.
[!_ISOMAC] (TEST_OFFSET): Likewise.
* sysdeps/ieee754/dbl-64/s_totalorder.c: Include <shlib-compat.h>
and <first-versions.h>.
(__totalorder): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/dbl-64/s_totalordermag.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermag): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalorder): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermag): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/float128/float128_private.h
(__totalorder_compatl): New macro.
(__totalordermag_compatl): Likewise.
* sysdeps/ieee754/flt-32/s_totalorderf.c: Include <shlib-compat.h>
and <first-versions.h>.
(__totalorderf): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/flt-32/s_totalordermagf.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermagf): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-128/s_totalorderl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalorderl): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/ldbl-128/s_totalordermagl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermagl): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Include
<shlib-compat.h>.
(__totalorderl): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c: Include
<shlib-compat.h>.
(__totalordermagl): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-96/s_totalorderl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalorderl): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/ldbl-96/s_totalordermagl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermagl): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c (totalorderl): Take
pointer arguments.
* sysdeps/ieee754/ldbl-opt/nldbl-totalordermag.c (totalordermagl):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c
(do_test): Update calls to totalorderl and totalordermagl.
* sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c (do_test):
Update calls to totalorderl and totalordermagl.
* sysdeps/mach/hurd/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/csky/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
This patch starts preparation for C2X support in glibc headers by
adding a feature test macro _ISOC2X_SOURCE and corresponding
__GLIBC_USE (ISOC2X). (I chose to use the newer __GLIBC_USE style for
this rather than the older __USE_* macros tested with #ifdef.) As
with other such macros, C2X features are also enabled by compiling for
a standard newer than C17, or by using _GNU_SOURCE.
This patch does not itself enable anything new in the headers for C2X;
that is to be done in followup patches. (For example, most of the TS
18661-1 functions should be declared for C2X without any
__STDC_WANT_IEC_60559_BFP_EXT__ being needed, but the ones that
18661-1 adds to Annex F because of their close relation to IEEE 754
formats do still need the WANT macro in C2X.)
Once C2X becomes an actual standard we'll presumably move to using the
actual year in the feature test macro and __GLIBC_USE, with some
period when both macro spellings are accepted, as was done with
_ISOC9X_SOURCE.
Tested for x86_64.
* include/features.h (_ISOC2X_SOURCE): New feature test macro.
Undefine and define to 1 if [_GNU_SOURCE].
(__GLIBC_USE_ISOC2X): New macro. Undefine and redefine depending
on [_ISOC2X_SOURCE] and [__STDC_VERSION__ > 201710L].
(__USE_ISOC11): Also define to 1 if [_ISOC2X_SOURCE].
(__USE_ISOC99): Likewise.
(__USE_ISOC95): Likewise.
* manual/creature.texi (_ISOC2X_SOURCE): Document.
The new IFUNC resolver call ABI was introduced in
commit 2b8a3c86e7
Commit: Szabolcs Nagy <szabolcs.nagy@arm.com>
CommitDate: 2019-07-04 11:13:32 +0100
aarch64: new ifunc resolver ABI
See the commit log and the comments in sys/ifunc.h for details.
This change should be fully backwards-compatible because the old
code aborted the load if a soname mismatch was encountered
(instead of searching further for a matching symbol). This means
that no different symbols are found.
The soname check was explicitly disabled for the skip_map != NULL
case. However, this only happens with dl(v)sym and RTLD_NEXT,
and those lookups do not come with a verneed entry that could be used
for the check.
The error check was already explicitly disabled for the skip_map !=
NULL case, that is, when dl(v)sym was called with RTLD_NEXT. But
_dl_vsym always sets filename in the struct r_found_version argument
to NULL, so the check was not active anyway. This means that
symbol lookup results for the skip_map != NULL case do not change,
either.
The kernel is evolving this interface (e.g., removal of the
restriction on cross-device copies), and keeping up with that
is difficult. Applications which need the function should
run kernels which support the system call instead of relying on
the imperfect glibc emulation.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Now that there are no internal users of __sysctl left, it is possible
to add an unconditional deprecation warning to <sys/sysctl.h>.
To avoid a test failure due this warning in check-install-headers,
skip the test for sys/sysctl.h.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
No 32-bit system call wrapper is added because the interface
is problematic because it cannot deal with 64-bit inode numbers
and 64-bit directory hashes.
A future commit will deprecate the undocumented getdirentries
and getdirentries64 functions.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Linux only supports the required ISA sysctls on StrongARM devices,
which are armv4 and no longer tested during glibc development
and probably bit-rotted by this point. (No reported test results,
and the last discussion of armv4 support was in the glibc 2.19
release notes.)
GCC 9 dropped support for the SPE extensions to PowerPC, which means
powerpc*-*-*gnuspe* configurations are no longer buildable with that
compiler. This ISA extension was peculiar to the “e500” line of
embedded PowerPC chips, which, as far as I can tell, are no longer
being manufactured, so I think we should follow suit.
This patch was developed by grepping for “e500”, “__SPE__”, and
“__NO_FPRS__”, and may not eliminate every vestige of SPE support.
Most uses of __NO_FPRS__ are left alone, as they are relevant to
normal embedded PowerPC with soft-float.
* sysdeps/powerpc/preconfigure: Error out on powerpc-*-*gnuspe*
host type.
* scripts/build-many-glibcs.py: Remove powerpc-*-linux-gnuspe
and powerpc-*-linux-gnuspe-e500v1 from list of build configurations.
* sysdeps/powerpc/powerpc32/e500: Recursively delete.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/e500: Recursively delete.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/context-e500.h:
Delete.
* sysdeps/powerpc/fpu_control.h: Remove SPE variant.
Issue an #error if used with a compiler in SPE-float mode.
* sysdeps/powerpc/powerpc32/__longjmp_common.S
* sysdeps/powerpc/powerpc32/setjmp_common.S
* sysdeps/unix/sysv/linux/powerpc/powerpc32/getcontext-common.S
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/getcontext.S
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/setcontext.S
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/swapcontext.S
* sysdeps/unix/sysv/linux/powerpc/powerpc32/setcontext-common.S
* sysdeps/unix/sysv/linux/powerpc/powerpc32/swapcontext-common.S:
Remove code to preserve SPE register state.
* sysdeps/unix/sysv/linux/powerpc/elision-lock.c
* sysdeps/unix/sysv/linux/powerpc/elision-trylock.c
* sysdeps/unix/sysv/linux/powerpc/elision-unlock.c
Remove __SPE__ ifndefs.
The tgkill function is sometimes used in crash handlers.
<bits/signal_ext.h> follows the same approach as <bits/unistd_ext.h>
(which was added for the gettid system call wrapper).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Unicode 12.1.0 Support: Character encoding, character type info, and
transliteration tables are all updated to Unicode 12.1.0, using
the generator scripts contributed by Mike FABIAN (Red Hat).
Some info about the number of characters added or changed:
Total added characters in newly generated CHARMAP: 1
added: <U32FF> /xe3/x8b/xbf SQUARE ERA NAME REIWA
Total added characters in newly generated WIDTH: 1
added: <U32FF> 2 : eaw=W category=So bidi=L name=SQUARE ERA NAME REIWA
graph: Added 1 characters in new ctype which were not in old ctype
graph: Added: ㋿ U+32FF SQUARE ERA NAME REIWA
print: Added 1 characters in new ctype which were not in old ctype
print: Added: ㋿ U+32FF SQUARE ERA NAME REIWA
punct: Added 1 characters in new ctype which were not in old ctype
punct: Added: ㋿ U+32FF SQUARE ERA NAME REIWA
The twalk function is very difficult to use in a multi-threaded
program because there is no way to pass external state to the
iterator function.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Commit 2d6ab5df3b ("Document and fix
--enable-bind-now [BZ #21015]") extended BIND_NOW to all installed
shared objects. This change also covers installed programs.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
As discussed previously on libc-alpha [1], this patch follows up the idea
and add both the __attribute_alloc_size__ on malloc functions (malloc,
calloc, realloc, reallocarray, valloc, pvalloc, and memalign) and limit
maximum requested allocation size to up PTRDIFF_MAX (taking into
consideration internal padding and alignment).
This aligns glibc with gcc expected size defined by default warning
-Walloc-size-larger-than value which warns for allocation larger than
PTRDIFF_MAX. It also aligns with gcc expectation regarding libc and
expected size, such as described in PR#67999 [2] and previously discussed
ISO C11 issues [3] on libc-alpha.
From the RFC thread [4] and previous discussion, it seems that consensus
is only to limit such requested size for malloc functions, not the system
allocation one (mmap, sbrk, etc.).
The implementation changes checked_request2size to check for both overflow
and maximum object size up to PTRDIFF_MAX. No additional checks are done
on sysmalloc, so it can still issue mmap with values larger than
PTRDIFF_T depending on the requested size.
The __attribute_alloc_size__ is for functions that return a pointer only,
which means it cannot be applied to posix_memalign (see remarks in GCC
PR#87683 [5]). The runtimes checks to limit maximum requested allocation
size does applies to posix_memalign.
Checked on x86_64-linux-gnu and i686-linux-gnu.
[1] https://sourceware.org/ml/libc-alpha/2018-11/msg00223.html
[2] https://gcc.gnu.org/bugzilla//show_bug.cgi?id=67999
[3] https://sourceware.org/ml/libc-alpha/2011-12/msg00066.html
[4] https://sourceware.org/ml/libc-alpha/2018-11/msg00224.html
[5] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=87683
[BZ #23741]
* malloc/hooks.c (malloc_check, realloc_check): Use
__builtin_add_overflow on overflow check and adapt to
checked_request2size change.
* malloc/malloc.c (__libc_malloc, __libc_realloc, _mid_memalign,
__libc_pvalloc, __libc_calloc, _int_memalign): Limit maximum
allocation size to PTRDIFF_MAX.
(REQUEST_OUT_OF_RANGE): Remove macro.
(checked_request2size): Change to inline function and limit maximum
requested size to PTRDIFF_MAX.
(__libc_malloc, __libc_realloc, _int_malloc, _int_memalign): Limit
maximum allocation size to PTRDIFF_MAX.
(_mid_memalign): Use _int_memalign call for overflow check.
(__libc_pvalloc): Use __builtin_add_overflow on overflow check.
(__libc_calloc): Use __builtin_mul_overflow for overflow check and
limit maximum requested size to PTRDIFF_MAX.
* malloc/malloc.h (malloc, calloc, realloc, reallocarray, memalign,
valloc, pvalloc): Add __attribute_alloc_size__.
* stdlib/stdlib.h (malloc, realloc, reallocarray, valloc): Likewise.
* malloc/tst-malloc-too-large.c (do_test): Add check for allocation
larger than PTRDIFF_MAX.
* malloc/tst-memalign.c (do_test): Disable -Walloc-size-larger-than=
around tests of malloc with negative sizes.
* malloc/tst-posix_memalign.c (do_test): Likewise.
* malloc/tst-pvalloc.c (do_test): Likewise.
* malloc/tst-valloc.c (do_test): Likewise.
* malloc/tst-reallocarray.c (do_test): Replace call to reallocarray
with resulting size allocation larger than PTRDIFF_MAX with
reallocarray_nowarn.
(reallocarray_nowarn): New function.
* NEWS: Mention the malloc function semantic change.
This functionality was deprecated in glibc 2.25.
This commit only includes the core changes to remove the
functionality. It does not remove the RES_USE_INET6 handling in the
individual NSS service modules and the res_use_inet6 function.
These changes will happen in future commits.
The Japanese era name will be changed on May 1, 2019. The Japanese
government made a preliminary announcement on April 1, 2019.
The glibc ja_JP locale must be updated to include the new era name for
strftime's alternative year format support.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
ChangeLog:
[BZ #22964]
* localedata/locales/ja_JP (LC_TIME): Add entry for the new Japanese
era.
* time/tst-strftime2.c (dates): Add 2019-04-30 and 2019-05-01.
(mkreftable): Add rules for the new Japanese era and the new dates.
The stub implementations are turned into compat symbols.
Linux actually has two reserved system call numbers (for getpmsg
and putpmsg), but these system calls have never been implemented,
and there are no plans to implement them, so this patch replaces
the wrappers with the generic stubs.
According to <https://bugzilla.redhat.com/show_bug.cgi?id=436349>,
the presence of the XSI STREAMS declarations is a minor portability
hazard because they are not actually implemented.
This commit does not change the TIRPC support code in
sunrpc/rpc_svcout.c. It uses additional XTI functionality and
therefore never worked with glibc.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Unicode 12.0.0 Support: Character encoding, character type info, and
transliteration tables are all updated to Unicode 12.0.0, using
the generator scripts contributed by Mike FABIAN (Red Hat).
Some info about the number of characters added or changed:
Total added characters in newly generated CHARMAP: 554
Total added characters in newly generated WIDTH: 106
alpha: Missing 8 characters of old ctype in new ctype
(These are combining marks, apparently they were removed from alpha
on purpose)
alpha: Added 295 characters in new ctype which were not in old ctype
combining: Missing 2 characters of old ctype in new ctype
(U+1CF2 VEDIC SIGN ARDHAVISARGA and U+1CF3 VEDIC SIGN ROTATED ARDHAVISARGA,
these are now "Alphabetic" in Unicode 12.0.0)
combining: Added 37 characters in new ctype which were not in old ctype
combining_level3: Missing 2 characters of old ctype in new ctype
(U+1CF2 VEDIC SIGN ARDHAVISARGA and U+1CF3 VEDIC SIGN ROTATED ARDHAVISARGA,
these are now "Alphabetic" in Unicode 12.0.0)
combining_level3: Added 26 characters in new ctype which were not in old ctype
graph: Added 554 characters in new ctype which were not in old ctype
lower: Added 6 characters in new ctype which were not in old ctype
print: Added 554 characters in new ctype which were not in old ctype
punct: Missing 29 characters of old ctype in new ctype
(These characters have all become "Alphabetic" in Unicode 12.0.0.
Therefore, they are not in "punct" anymore (see: is_punct() in unicode_utils.py))
punct: Added 296 characters in new ctype which were not in old ctype
tolower: Added 7 characters in new ctype which were not in old ctype
totitle: Added 7 characters in new ctype which were not in old ctype
toupper: Added 7 characters in new ctype which were not in old ctype
upper: Added 7 characters in new ctype which were not in old ctype
[BZ #24307]
* localedata/unicode-gen/Makefile (UNICODE_VERSION): Set to 12.0.0.
* localedata/unicode-gen/DerivedCoreProperties.txt: Update to Unicode 12.0.0.
* localedata/unicode-gen/EastAsianWidth.txt: Likewise.
* localedata/unicode-gen/PropList.txt: Likewise.
* localedata/unicode-gen/UnicodeData.txt: Likewise.
* localedata/unicode-gen/ctype_compatibility_test_cases.py: U+108D became
"Alphabetic" in Unicode 12.0.0. Adapt test case.
* localedata/charmaps/UTF-8: Regenerate.
* localedata/locales/i18n_ctype: Likewise.
* localedata/locales/tr_TR: Likewise.
* localedata/locales/translit_circle: Likewise.
* localedata/locales/translit_cjk_compat: Likewise.
* localedata/locales/translit_combining: Likewise.
* localedata/locales/translit_compat: Likewise.
* localedata/locales/translit_font: Likewise.
* localedata/locales/translit_fraction: Likewise.
This commit adds gettid to <unistd.h> on Linux, and not to the
kernel-independent GNU API.
gettid is now supportable on Linux because too many things assume a
1:1 mapping between libpthread threads and kernel threads.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
As the result of commit 6e6249d0b4
("BZ#14743: Move clock_* symbols from librt to libc."), in glibc 2.17,
clock_gettime, clock_getres, clock_settime, clock_getcpuclockid,
clock_nanosleep were added to libc, and the file rt/clock-compat.c
was added with forwarders to the actual implementations in libc.
These forwarders were wrapped in
#if SHLIB_COMPAT (librt, GLIBC_2_2, GLIBC_2_17)
so that they are not present for newer architectures (such as
powerpc64le) with a 2.17 or later ABI baseline. But the forwarders
were not marked as compatibility symbols. As a result, on older
architectures, historic configure checks such as
AC_CHECK_LIB(rt, clock_gettime)
still cause linking against librt, even though this is completely
unnecessary. It also creates a needless porting hazard because
architectures behave differently when it comes to symbol availability.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since the size argument is unsigned. we should use unsigned Jcc
instructions, instead of signed, to check size.
Tested on x86-64 and x32, with and without --disable-multi-arch.
[BZ #24155]
CVE-2019-7309
* NEWS: Updated for CVE-2019-7309.
* sysdeps/x86_64/memcmp.S: Use RDX_LP for size. Clear the
upper 32 bits of RDX register for x32. Use unsigned Jcc
instructions, instead of signed.
* sysdeps/x86_64/x32/Makefile (tests): Add tst-size_t-memcmp-2.
* sysdeps/x86_64/x32/tst-size_t-memcmp-2.c: New test.
As discussed during development for glibc 2.29, when we increased the
required minimum GCC version for building glibc to GCC 5, working
purely based on the times at which such requirements have been
increased in the past it would be appropriate for glibc 2.30 to
require GCC 6 (matching GCC 4.9 having been required for glibc 2.26).
Naming 6.2 specifically as the minimum version then means a separate
version requirement no longer needs to be specified for powerpc64le.
Thus, this patch increases the minimum to 6.2, removing the
documentation of the separate requirement for powerpc64le. It does
not remove the powerpc64le configure test, or any __GNUC_PREREQ that
could be removed as not being in installed headers or files shared
with gnulib; I think such cleanups are best done separately.
Tested for x86_64.
* configure.ac (libc_cv_compiler_ok): Require GCC 6.2 or later.
* configure: Regenerated.
* manual/install.texi (Tools for Compilation): Update minimum GCC
version.
* INSTALL: Regenerated.
* NEWS: Add the list of bugs fixed in 2.29.
* manual/contrib.texi: Update contributors list with some more
names.
* manual/install.texi: Update latest versions of packages
tested.
* INSTALL: Regenerated.
The full representation of the alternative calendar year (%EY)
typically includes an internal use of "%Ey". As a GNU extension,
apply any flags on "%EY" (e.g. "%_EY", "%-EY") to the internal "%Ey",
allowing users of "%EY" to control how the year is padded.
Reviewed-by: Rafal Luzynski <digitalfreak@lingonborough.com>
Reviewed-by: Zack Weinberg <zackw@panix.com>
ChangeLog:
[BZ #24096]
* manual/time.texi (strftime): Document "%EC" and "%EY".
* time/Makefile (tests): Add tst-strftime2.
(LOCALES): Add ja_JP.UTF-8, lo_LA.UTF-8, and th_TH.UTF-8.
* time/strftime_l.c (__strftime_internal): Add argument yr_spec to
override padding for "%Ey".
If an optional flag ('_' or '-') is specified to "%EY", interpret the
"%Ey" in the subformat as if decorated with that flag.
* time/tst-strftime2.c: New file.
In Japanese locales, strftime's alternative year format (%Ey) produces
a year numbered within a time period called an _era_. A new era
typically begins when a new emperor is enthroned. The result of "%Ey"
is therefore usually a one- or two-digit number.
Many programs that display Japanese era dates assume that the era year
is two digits wide. To improve how these programs display dates
during the first nine years of a new era, change "%Ey" to pad one-
digit numbers on the left with a zero. This change applies to all
locales. It is expected to be harmless for other locales that use the
alternative year format (e.g. lo_LA and th_TH, in which "%Ey" produces
the year of the Buddhist calendar) as those calendars' year numbers
are already more than two digits wide, and this is not expected to
change.
This change needs to be in place before 2019-05-01 CE, as a new era is
scheduled to begin on that date.
Reviewed-by: Zack Weinberg <zackw@panix.com>
Reviewed-by: Rafal Luzynski <digitalfreak@lingonborough.com>
ChangeLog:
[BZ #23758]
* manual/time.texi (strftime): Document "%Ey".
* time/strftime_l.c (__strftime_internal): Set the default width
padding with zero of "%Ey" to 2.
The IPv4 address parser in the getaddrinfo function is changed so that
it does not ignore trailing whitespace and all characters after it.
For backwards compatibility, the getaddrinfo function still recognizes
legacy name syntax, such as 192.000.002.010 interpreted as 192.0.2.8
(octal).
This commit does not change the behavior of inet_addr and inet_aton.
gethostbyname already had additional sanity checks (but is switched
over to the new __inet_aton_exact function for completeness as well).
To avoid sending the problematic query names over DNS, commit
6ca53a2453 ("resolv: Do not send queries
for non-host-names in nss_dns [BZ #24112]") is needed.
On x32, the size_t parameter may be passed in the lower 32 bits of a
64-bit register with the non-zero upper 32 bits. The string/memory
functions written in assembly can only use the lower 32 bits of a
64-bit register as length or must clear the upper 32 bits before using
the full 64-bit register for length.
This pach fixes memchr/wmemchr for x32. Tested on x86-64 and x32. On
x86-64, libc.so is the same with and withou the fix.
[BZ# 24097]
CVE-2019-6488
* sysdeps/x86_64/memchr.S: Use RDX_LP for length. Clear the
upper 32 bits of RDX register.
* sysdeps/x86_64/multiarch/memchr-avx2.S: Likewise.
* sysdeps/x86_64/x32/Makefile (tests): Add tst-size_t-memchr and
tst-size_t-wmemchr.
* sysdeps/x86_64/x32/test-size_t.h: New file.
* sysdeps/x86_64/x32/tst-size_t-memchr.c: Likewise.
* sysdeps/x86_64/x32/tst-size_t-wmemchr.c: Likewise.
The only difference between noncompliant and C99-compliant scanf is
that the former accepts the archaic GNU extension '%as' (also %aS and
%a[...]) meaning to allocate space for the input string with malloc.
This extension conflicts with C99's use of %a as a format _type_
meaning to read a floating-point number; POSIX.1-2008 standardized
equivalent functionality using the modifier letter 'm' instead (%ms,
%mS, %m[...]).
The extension was already disabled in most conformance modes:
specifically, any mode that doesn't involve _GNU_SOURCE and _does_
involve either strict conformance to C99 or loose conformance to both
C99 and POSIX.1-2001 would get the C99-compliant scanf. With
compilers new enough to use -std=gnu11 instead of -std=gnu89, or
equivalent, that includes the default mode.
With this patch, we now provide C99-compliant scanf in all
configurations except when _GNU_SOURCE is defined *and*
__STDC_VERSION__ or __cplusplus (whichever is relevant) indicates
C89/C++98. This leaves the old scanf available under e.g. -std=c89
-D_GNU_SOURCE, but removes it from e.g. -std=gnu11 -D_GNU_SOURCE (it
was already not present under -std=gnu11 without -D_GNU_SOURCE) and
from -std=gnu89 without -D_GNU_SOURCE.
There needs to be an internal override so we can compile the
noncompliant scanf itself. This is the same problem we had when we
removed 'gets' from _GNU_SOURCE and it's dealt with the same way:
there's a new __GLIBC_USE symbol, DEPRECATED_SCANF, which defaults to
off under the appropriate conditions for external code, but can be
overridden by individual files within stdio.
We also run into problems with PLT bypass for internal uses of sscanf,
because libc_hidden_proto uses __REDIRECT and so does the logic in
stdio.h for choosing which implementation of scanf to use; __REDIRECT
isn't transitive, so include/stdio.h needs to bridge the gap with a
macro. As far as I can tell, sscanf is the only function in this
family that's internally called by unrelated code.
Finally, there are several tests in stdio-common that use the
extension. bug21.c is a regression test for a crash; it still
exercises the relevant code when changed to use %ms instead of %as.
scanf14.c through scanf17.c are more complicated since they are
actually testing the subtleties of the extension - under what
circumstances is 'a' treated as a modifier letter, etc. I changed all
of them to use %ms instead of %as as well, but duplicated scanf14.c
and scanf16.c as scanf14a.c and scanf16a.c. These still use %as and
are compiled with -std=gnu89 to access the old extension. A bunch of
diagnostic overrides and manual workarounds for the old stdio.h
behavior become unnecessary. Yay!
* include/features.h (__GLIBC_USE_DEPRECATED_SCANF): New __GLIBC_USE
parameter. Only use deprecated scanf when __USE_GNU is defined
and __STDC_VERSION__ is less than 199901L or __cplusplus is less
than 201103L, whichever is relevant for the language being compiled.
* libio/stdio.h, libio/bits/stdio-ldbl.h: Decide whether to redirect
scanf, fscanf, sscanf, vscanf, vfscanf, and vsscanf to their
__isoc99_ variants based only on __GLIBC_USE (DEPRECATED_SCANF).
* wcsmbs/wchar.h: wcsmbs/bits/wchar-ldbl.h: Likewise for
wscanf, fwscanf, swscanf, vwscanf, vfwscanf, and vswscanf.
* libio/iovsscanf.c
* libio/fwscanf.c
* libio/iovswscanf.c
* libio/swscanf.c
* libio/vscanf.c
* libio/vwscanf.c
* libio/wscanf.c
* stdio-common/fscanf.c
* stdio-common/scanf.c
* stdio-common/vfscanf.c
* stdio-common/vfwscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-compat.c
* sysdeps/ieee754/ldbl-opt/nldbl-fscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-fwscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-iovfscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-scanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-sscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-swscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-vfscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-vfwscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-vscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-vsscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-vswscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-vwscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-wscanf.c:
Override __GLIBC_USE_DEPRECATED_SCANF to 1.
* stdio-common/sscanf.c: Likewise. Remove ldbl_hidden_def for __sscanf.
* stdio-common/isoc99_sscanf.c: Add libc_hidden_def for __isoc99_sscanf.
* include/stdio.h: Provide libc_hidden_proto for __isoc99_sscanf,
not sscanf.
[!__GLIBC_USE (DEPRECATED_SCANF)]: Define sscanf as __isoc99_scanf
with a preprocessor macro.
* stdio-common/bug21.c, stdio-common/scanf14.c:
Use %ms instead of %as, %mS instead of %aS, %m[] instead of %a[];
remove DIAG_IGNORE_NEEDS_COMMENT for -Wformat.
* stdio-common/scanf16.c: Likewise. Add __attribute__ ((format (scanf)))
to xscanf, xfscanf, xsscanf.
* stdio-common/scanf14a.c: New copy of scanf14.c which still uses
%as, %aS, %a[]. Remove DIAG_IGNORE_NEEDS_COMMENT for -Wformat.
* stdio-common/scanf16a.c: New copy of scanf16.c which still uses
%as, %aS, %a[]. Add __attribute__ ((format (scanf))) to xscanf,
xfscanf, xsscanf.
* stdio-common/scanf15.c, stdio-common/scanf17.c: No need to
override feature selection macros or provide definitions of u_char etc.
* stdio-common/Makefile (tests): Add scanf14a and scanf16a.
(CFLAGS-scanf15.c, CFLAGS-scanf17.c): Remove.
(CFLAGS-scanf14a.c, CFLAGS-scanf16a.c): New. Compile these files
with -std=gnu89.
We know that building glibc with GCC 4.9 is broken on various
platforms (bug 23993). As it's more than a year since we last
increased the minimum GCC version to build glibc, this patch changes
the requirement to be GCC 5 or later (indeed, based on 4.9 having been
required for building 2.26, it would be consistent in terms of timing
to require GCC 6 or later from the 2.30 release onwards). It
deliberately just updates the configure test and corresponding
documentation, leaving removal of no-longer-needed __GNUC_PREREQ tests
for a separate patch.
In the NEWS entry, the requirement for a newer GCC version for
powerpc64le is reiterated (as in the entry for the 4.9 requirement in
2.26) to avoid suggesting the version requirement there has gone down.
(If that version goes up further as part of support for binary128 long
double, of course the wording would change at that time.)
Tested for x86_64.
[BZ #23993]
* configure.ac (libc_cv_compiler_ok): Require GCC 5 or later.
* configure: Regenerated.
* manual/install.texi (Tools for Compilation): Update minimum GCC
version.
* INSTALL: Regenerated.
Along with posix_spawn_file_actions_addchdir,
posix_spawn_file_actions_addfchdir is the subject of a change proposal
for POSIX: <http://austingroupbugs.net/view.php?id=1208>
This patch uses posix_spawn on popen instead of fork and execl. On Linux
this has the advantage of much lower memory consumption (usually 32 Kb
minimum for the mmap stack area).
Two issues are also fixed with this change:
* BZ#17490: although POSIX pthread_atfork description only list 'fork'
as the function that should execute the atfork handlers, popen
description states that:
'[...] shall be *as if* a child process were created within the popen()
call using the fork() function [...]'
Other libc/system seems to follow the idea atfork handlers should not be
executed for popen:
libc/system | run atfork handles | notes
------------|----------------------|---------------------------------------
Freebsd | no | uses vfork
Solaris 11 | no |
MacOSX 11 | no | implemented through posix_spawn syscall
------------|----------------------|----------------------------------------
Similar to posix_spawn and system, popen idea is to spawn a different
binary so all the POSIX rationale to run the atfork handlers to avoid
internal process inconsistency is not really required and in some cases
might be unsafe.
* BZ#22834: the described scenario, where the forked process might access
invalid memory due an inconsistent state in multithreaded environment,
should not happen because posix_spawn does not access the affected
data structure (proc_file_chain).
Checked on x86_64-linux-gnu and i686-linux-gnu.
[BZ #22834]
[BZ #17490]
* NEWS: Add new semantic for atfork with popen and system.
* libio/iopopen.c (_IO_new_proc_open): use posix_spawn instead of
fork and execl.
This patch makes Python 3.4 or later a required tool for building
glibc, so allowing changes of awk, perl etc. code used in the build
and test to Python code without any such changes needing makefile
conditionals or to handle older Python versions.
This patch makes the configure test for Python check the version and
give an error if Python is missing or too old, and removes makefile
conditionals that are no longer needed. It does not itself convert
any code from another language to Python, and does not remove any
compatibility with older Python versions from existing scripts.
Tested for x86_64.
* configure.ac (PYTHON_PROG): Use AC_CHECK_PROG_VER. Set
critic_missing for versions before 3.4.
* configure: Regenerated.
* manual/install.texi (Tools for Compilation): Document
requirement for Python to build glibc.
* INSTALL: Regenerated.
* Rules [PYTHON]: Make code unconditional.
* benchtests/Makefile [PYTHON]: Likewise.
* conform/Makefile [PYTHON]: Likewise.
* manual/Makefile [PYTHON]: Likewise.
* math/Makefile [PYTHON]: Likewise.
This patch extends gen-libm-test.py to generate the ulps table for the
manual, so meaning there is only a single ulps file parser needed and
another Perl script is eliminated. As with the introduction of
gen-libm-test.py, this is designed to generate exactly the same
libm-err.texi as libm-err-tab.pl did. (gen-libm-test.py is still
shorter in lines than the old gen-libm-test.pl even after this patch.)
Note that this introduces a Python dependency for building the manual,
which is thus noted in install.texi and NEWS.
Tested building html / info / pdf versions of the manual.
* math/gen-libm-test.py: Import os.
(ALL_FLOATS_MANUAL): New constant.
(ALL_FLOATS_SUFFIX): Likewise.
(Ulps.all_functions): New function.
(real_all_ulps): Likewise.
(generate_err_table_sub): Likewise.
(generate_err_table): Likewise.
(main): Handle -s and -m options.
* manual/libm-err-tab.pl: Remove.
* manual/Makefile ($(objpfx)stamp-libm-err): Use gen-libm-test.py
instead of libm-err-tab.pl.
[$(PERL) != no]: Change condition to [$(if $(PYTHON),$(PERL),no)
!= no].
* manual/install.texi (Tools for Compilation): Document
requirement for Python to build manual.
* INSTALL: Regenerated.
Linux from 3.9 through 4.2 does not abort HTM transaction on syscalls,
instead it suspend and resume it when leaving the kernel. The
side-effects of the syscall will always remain visible, even if the
transaction is aborted. This is an issue when transaction is used along
with futex syscall, on pthread_cond_wait for instance, where the futex
call might succeed but the transaction is rolled back leading the
pthread_cond object in an inconsistent state.
Glibc used to prevent it by always aborting a transaction before issuing
a syscall. Linux 4.2 also decided to abort active transaction in
syscalls which makes the glibc workaround superfluous. Worse, glibc
transaction abortion leads to a performance issue on recent kernels
where the HTM state is saved/restore lazily (v4.9). By aborting a
transaction on every syscalls, regardless whether a transaction has being
initiated before, GLIBS makes the kernel always save/restore HTM state
(it can not even lazily disable it after a certain number of syscall
iterations).
Because of this shortcoming, Transactional Lock Elision is just enabled
when it has been explicitly set (either by tunables of by a configure
switch) and if kernel aborts HTM transactions on syscalls
(PPC_FEATURE2_HTM_NOSC). It is reported that using simple benchmark [1],
the context-switch is about 5% faster by not issuing a tabort in every
syscall in newer kernels.
Checked on powerpc64le-linux-gnu with 4.4.0 kernel (Ubuntu 16.04).
* NEWS: Add note about new TLE support on powerpc64le.
* sysdeps/powerpc/nptl/tcb-offsets.sym (TM_CAPABLE): Remove.
* sysdeps/powerpc/nptl/tls.h (tcbhead_t): Rename tm_capable to
__ununsed1.
(TLS_INIT_TP, TLS_DEFINE_INIT_TP): Remove tm_capable setup.
(THREAD_GET_TM_CAPABLE, THREAD_SET_TM_CAPABLE): Remove macros.
* sysdeps/powerpc/powerpc32/sysdep.h,
sysdeps/powerpc/powerpc64/sysdep.h (ABORT_TRANSACTION_IMPL,
ABORT_TRANSACTION): Remove macros.
* sysdeps/powerpc/sysdep.h (ABORT_TRANSACTION): Likewise.
* sysdeps/unix/sysv/linux/powerpc/elision-conf.c (elision_init): Set
__pthread_force_elision iff PPC_FEATURE2_HTM_NOSC is set.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep.h,
sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep.h
sysdeps/unix/sysv/linux/powerpc/syscall.S (ABORT_TRANSACTION): Remove
usage.
* sysdeps/unix/sysv/linux/powerpc/not-errno.h: Remove file.
Reported-by: Breno Leitão <leitao@debian.org>
The algorithm is exp(y * log(x)), where log(x) is computed with about
1.3*2^-68 relative error (1.5*2^-68 without fma), returning the result
in two doubles, and the exp part uses the same algorithm (and lookup
tables) as exp, but takes the input as two doubles and a sign (to handle
negative bases with odd integer exponent). The __exp1 internal symbol
is no longer necessary.
There is separate code path when fma is not available but the worst case
error is about 0.54 ULP in both cases. The lookup table and consts for
log are 4168 bytes. The .rodata+.text is decreased by 37908 bytes on
aarch64. The non-nearest rounding error is less than 1 ULP.
Improvements on Cortex-A72 compared to current glibc master:
pow thruput: 2.40x in [0.01 11.1]x[0.01 11.1]
pow latency: 1.84x in [0.01 11.1]x[0.01 11.1]
Tested on
aarch64-linux-gnu (defined __FP_FAST_FMA, TOINT_INTRINSICS) and
arm-linux-gnueabihf (!defined __FP_FAST_FMA, !TOINT_INTRINSICS) and
x86_64-linux-gnu (!defined __FP_FAST_FMA, !TOINT_INTRINSICS) and
powerpc64le-linux-gnu (defined __FP_FAST_FMA, !TOINT_INTRINSICS) targets.
* NEWS: Mention pow improvements.
* math/Makefile (type-double-routines): Add e_pow_log_data.
* sysdeps/generic/math_private.h (__exp1): Remove.
* sysdeps/i386/fpu/e_pow_log_data.c: New file.
* sysdeps/ia64/fpu/e_pow_log_data.c: New file.
* sysdeps/ieee754/dbl-64/Makefile (CFLAGS-e_pow.c): Allow fma
contraction.
* sysdeps/ieee754/dbl-64/e_exp.c (__exp1): Remove.
(exp_inline): Remove.
(__ieee754_exp): Only single double input is handled.
* sysdeps/ieee754/dbl-64/e_pow.c: Rewrite.
* sysdeps/ieee754/dbl-64/e_pow_log_data.c: New file.
* sysdeps/ieee754/dbl-64/math_config.h (issignaling_inline): Define.
(__pow_log_data): Define.
* sysdeps/ieee754/dbl-64/upow.h: Remove.
* sysdeps/ieee754/dbl-64/upow.tbl: Remove.
* sysdeps/m68k/m680x0/fpu/e_pow_log_data.c: New file.
* sysdeps/x86_64/fpu/multiarch/Makefile (CFLAGS-e_pow-fma.c): Allow fma
contraction.
(CFLAGS-e_pow-fma4.c): Likewise.
As discussed at
<https://sourceware.org/ml/libc-alpha/2018-09/msg00191.html> and
followup discussions, the MIPS n32 definitions of pr_sigpend and
pr_sighold in struct elf_prstatus, and pr_flag in struct elf_prpsinfo,
are wrong to use unsigned long long int; actual n32 core dumps use a
32-bit type there, so userspace unsigned long int is correct for all
MIPS ABIs. This patch removes the conditionals (also thereby aligning
the structures with other architectures and so facilitating future
unification of different versions of this header).
Tested with build-many-glibcs.py for its MIPS configurations.
[BZ #23656]
* sysdeps/unix/sysv/linux/mips/sys/procfs.h (struct elf_prstatus):
Remove [_MIPS_SIM = _ABIN32] conditional case.
(struct elf_prpsinfo): Likewise.
As noted in
<https://sourceware.org/ml/libc-alpha/2018-09/msg00178.html>, glibc's
sys/procfs.h headers for microblaze, mips (n64), nios2 and riscv have
incorrect types for the pr_uid and pr_gid members of struct
elf_prpsinfo (as does the generic Linux version, but nothing uses
that).
This patch fixes those headers to use unsigned int. The generic Linux
version is also fixed, but I do *not* recommend making new
architectures use it yet. Rather, I think it should be reworked to
look more like a copy of the AArch64 version, but with a new
<bits/procfs.h> header included to provide register set definitions;
<bits/procfs.h> would then be architecture-specific while many
architectures could use the generic <sys/procfs.h>. This fix is
deliberately separate from any reworking to use a generic header more,
since it's possible there could be uses for backporting this fix but
not for backporting a subsequent cleanup.
Tested with build-many-glibcs.py. This of course doesn't provide much
validation of the structure layout; if the Linux kernel is fixed so
that "#include <linux/elfcore.h>" actually compiles with the headers
from "make headers_install" (and if the layout in both headers is
meant to be the same, whatever ABI we are building for), I have a test
that can be added to glibc to check the layout against that from the
Linux kernel.
[BZ #23649]
* sysdeps/unix/sysv/linux/microblaze/sys/procfs.h (struct
elf_prpsinfo): Use unsigned int for pr_uid and pr_gid.
* sysdeps/unix/sysv/linux/mips/sys/procfs.h (struct elf_prpsinfo):
Likewise.
* sysdeps/unix/sysv/linux/nios2/sys/procfs.h (struct
elf_prpsinfo): Likewise.
* sysdeps/unix/sysv/linux/riscv/sys/procfs.h (struct
elf_prpsinfo): Likewise.
* sysdeps/unix/sysv/linux/sys/procfs.h (struct elf_prpsinfo):
Likewise.
Similar algorithm is used as in log: log2(2^k x) = k + log2(c) + log2(x/c)
where the last term is approximated by a polynomial of x/c - 1, the first
order coefficient is about 1/ln2 in this case.
There is separate code path when fma instruction is not available for
computing x/c - 1 precisely, for which the table size is doubled.
The worst case error is 0.547 ULP (0.55 without fma), the read only
global data size is 1168 bytes (2192 without fma) on aarch64. The
non-nearest rounding error is less than 1 ULP.
Improvements on Cortex-A72 compared to current glibc master:
log2 thruput: 2.00x in [0.01 11.1]
log2 latency: 2.04x in [0.01 11.1]
log2 thruput: 2.17x in [0.999 1.001]
log2 latency: 2.88x in [0.999 1.001]
Tested on
aarch64-linux-gnu (defined __FP_FAST_FMA)
arm-linux-gnueabihf (!defined __FP_FAST_FMA)
x86_64-linux-gnu (!defined __FP_FAST_FMA)
powerpc64le-linxu-gnu (defined __FP_FAST_FMA)
targets.
* NEWS: Mention log2 improvements.
* math/Makefile (type-double-routines): Add e_log2_data.
* sysdeps/i386/fpu/e_log2_data.c: New file.
* sysdeps/ia64/fpu/e_log2_data.c: New file.
* sysdeps/ieee754/dbl-64/e_log2.c: Rewrite.
* sysdeps/ieee754/dbl-64/e_log2_data.c: New file.
* sysdeps/ieee754/dbl-64/math_config.h (__log2_data): Add.
* sysdeps/ieee754/dbl-64/wordsize-64/e_log2.c: Remove.
* sysdeps/m68k/m680x0/fpu/e_log2_data.c: New file.
Optimized log using carefully generated lookup table with 1/c and log(c)
values for small intervalls around 1. The log(c) is very near a double
precision value, it has about 62 bits precision. The algorithm is
log(2^k x) = k log(2) + log(c) + log(x/c), where the last term is
approximated by a polynomial of x/c - 1. Near 1 a single polynomial of
x - 1 is used.
There is separate code path when fma instruction is not available for
computing x/c - 1 precisely, in which case the table size is doubled.
The code uses __builtin_fma under __FP_FAST_FMA to ensure it is inlined
as an instruction.
With the default configuration settings the worst case error is 0.519 ULP
(and 0.520 without fma), the rodata size is 2192 bytes (4240 without fma).
The non-nearest rounding error is less than 1 ULP.
Improvements on Cortex-A72 compared to current glibc master:
log thruput: 3.28x in [0.01 11.1]
log latency: 2.23x in [0.01 11.1]
log thruput: 1.56x in [0.999 1.001]
log latency: 1.57x in [0.999 1.001]
Tested on
aarch64-linux-gnu (defined __FP_FAST_FMA)
arm-linux-gnueabihf (!defined __FP_FAST_FMA)
x86_64-linux-gnu (!defined __FP_FAST_FMA)
powerpc64le-linux-gnu (defined __FP_FAST_FMA)
targets.
* NEWS: Mention log improvement.
* math/Makefile (type-double-routines): Add e_log_data.
* sysdeps/i386/fpu/e_log_data.c: New file.
* sysdeps/ia64/fpu/e_log_data.c: New file.
* sysdeps/ieee754/dbl-64/e_log.c: Rewrite.
* sysdeps/ieee754/dbl-64/e_log_data.c: New file.
* sysdeps/ieee754/dbl-64/math_config.h (__log_data): Add.
* sysdeps/ieee754/dbl-64/ulog.h: Remove.
* sysdeps/ieee754/dbl-64/ulog.tbl: Remove.
* sysdeps/m68k/m680x0/fpu/e_log_data.c: New file.
Optimized exp and exp2 implementations using a lookup table for
fractional powers of 2. There are several variants, see e_exp_data.c,
they can be selected by modifying math_config.h allowing different
tradeoffs.
The default selection should be acceptable as generic libm code.
Worst case error is 0.509 ULP for exp and 0.507 ULP for exp2, on
aarch64 the rodata size is 2160 bytes, shared between exp and exp2.
On aarch64 .text + .rodata size decreased by 24912 bytes.
The non-nearest rounding error is less than 1 ULP even on targets
without efficient round implementation (although the error rate is
higher in that case). Targets with single instruction, rounding mode
independent, to nearest integer rounding and conversion can use them
by setting TOINT_INTRINSICS and adding the necessary code to their
math_private.h.
The __exp1 code uses the same algorithm, so the error bound of pow
increased a bit.
New double precision error handling code was added following the
style of the single precision error handling code.
Improvements on Cortex-A72 compared to current glibc master:
exp thruput: 1.61x in [-9.9 9.9]
exp latency: 1.53x in [-9.9 9.9]
exp thruput: 1.13x in [0.5 1]
exp latency: 1.30x in [0.5 1]
exp2 thruput: 2.03x in [-9.9 9.9]
exp2 latency: 1.64x in [-9.9 9.9]
For small (< 1) inputs the current exp code uses a separate algorithm
so the speed up there is less.
Was tested on
aarch64-linux-gnu (TOINT_INTRINSICS, fma contraction) and
arm-linux-gnueabihf (!TOINT_INTRINSICS, no fma contraction) and
x86_64-linux-gnu (!TOINT_INTRINSICS, no fma contraction) and
powerpc64le-linux-gnu (!TOINT_INTRINSICS, fma contraction) targets,
only non-nearest rounding ulp errors increase and they are within
acceptable bounds (ulp updates are in separate patches).
* NEWS: Mention exp and exp2 improvements.
* math/Makefile (libm-support): Remove t_exp.
(type-double-routines): Add math_err and e_exp_data.
* sysdeps/aarch64/libm-test-ulps: Update.
* sysdeps/arm/libm-test-ulps: Update.
* sysdeps/i386/fpu/e_exp_data.c: New file.
* sysdeps/i386/fpu/math_err.c: New file.
* sysdeps/i386/fpu/t_exp.c: Remove.
* sysdeps/ia64/fpu/e_exp_data.c: New file.
* sysdeps/ia64/fpu/math_err.c: New file.
* sysdeps/ia64/fpu/t_exp.c: Remove.
* sysdeps/ieee754/dbl-64/e_exp.c: Rewrite.
* sysdeps/ieee754/dbl-64/e_exp2.c: Rewrite.
* sysdeps/ieee754/dbl-64/e_exp_data.c: New file.
* sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Update error bound.
* sysdeps/ieee754/dbl-64/eexp.tbl: Remove.
* sysdeps/ieee754/dbl-64/math_config.h: New file.
* sysdeps/ieee754/dbl-64/math_err.c: New file.
* sysdeps/ieee754/dbl-64/t_exp.c: Remove.
* sysdeps/ieee754/dbl-64/t_exp2.h: Remove.
* sysdeps/ieee754/dbl-64/uexp.h: Remove.
* sysdeps/ieee754/dbl-64/uexp.tbl: Remove.
* sysdeps/m68k/m680x0/fpu/e_exp_data.c: New file.
* sysdeps/m68k/m680x0/fpu/math_err.c: New file.
* sysdeps/m68k/m680x0/fpu/t_exp.c: Remove.
* sysdeps/powerpc/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Update.
Initially, this function was restricted to _GNU_SOURCE, but experience
shows that compatibility with existing build systems is improved if we
declare it under _DEFAULT_SOURCE as well.
The NEWS entry for sinf improvements is listed for 2.28, while it was
committed in 2.29, so move it there and mention tanf.
Committed as obvious.
* NEWS: Move optimized sinf entry to 2.29.
The second patch improves performance of sinf and cosf using the same
algorithms and polynomials. The returned values are identical to sincosf
for the same input. ULP definitions for AArch64 and x64 are updated.
sinf/cosf througput gains on Cortex-A72:
* |x| < 0x1p-12 : 1.2x
* |x| < M_PI_4 : 1.8x
* |x| < 2 * M_PI: 1.7x
* |x| < 120.0 : 2.3x
* |x| < Inf : 3.0x
* NEWS: Mention sinf, cosf, sincosf.
* sysdeps/aarch64/libm-test-ulps: Update ULP for sinf, cosf, sincosf.
* sysdeps/x86_64/fpu/libm-test-ulps: Update ULP for sinf and cosf.
* sysdeps/x86_64/fpu/multiarch/s_sincosf-fma.c: Add definitions of
constants rather than including generic sincosf.h.
* sysdeps/x86_64/fpu/s_sincosf_data.c: Remove.
* sysdeps/ieee754/flt-32/s_cosf.c (cosf): Rewrite.
* sysdeps/ieee754/flt-32/s_sincosf.h (reduced_sin): Remove.
(reduced_cos): Remove.
(sinf_poly): New function.
* sysdeps/ieee754/flt-32/s_sinf.c (sinf): Rewrite.
The convenience install target 'install-locale-files' is created
to allow distributions to install all of the SUPPORTED locales as
files instead of into the locale-archive.
You invoke the new convenience target like this:
make localedata/install-locale-files DESTDIR=<prefix>
The glibc.tune namespace is vaguely named since it is a 'tunable', so
give it a more specific name that describes what it refers to. Rename
the tunable namespace to 'cpu' to more accurately reflect what it
encompasses. Also rename glibc.tune.cpu to glibc.cpu.name since
glibc.cpu.cpu is weird.
* NEWS: Mention the change.
* elf/dl-tunables.list: Rename tune namespace to cpu.
* sysdeps/powerpc/dl-tunables.list: Likewise.
* sysdeps/x86/dl-tunables.list: Likewise.
* sysdeps/aarch64/dl-tunables.list: Rename tune.cpu to
cpu.name.
* elf/dl-hwcaps.c (_dl_important_hwcaps): Adjust.
* elf/dl-hwcaps.h (GET_HWCAP_MASK): Likewise.
* manual/README.tunables: Likewise.
* manual/tunables.texi: Likewise.
* sysdeps/powerpc/cpu-features.c: Likewise.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.c
(init_cpu_features): Likewise.
* sysdeps/x86/cpu-features.c: Likewise.
* sysdeps/x86/cpu-features.h: Likewise.
* sysdeps/x86/cpu-tunables.c: Likewise.
* sysdeps/x86_64/Makefile: Likewise.
* sysdeps/x86/dl-cet.c: Likewise.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Glibc supports two grammatical forms of month names and we keep adding
the locale data which actually use this feature but those two forms are
not necessarily nominative and genitive. It is better to use a more
generic term.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Multiple updates for Occitan language including alternative month names,
update abday and abmon, fix typos in day, fix d_fmt, correct LC_NAME,
and use “copy "ca_ES"” as LC_COLLATE.
[BZ #23140]
* localedata/locales/oc_FR (mon): Rename to...
(alt_mon): This, then update October (typo fix).
(mon): New content (genitive case, month names preceded by
"de" or "d’").
[BZ #23422]
* localedata/locales/oc_FR (abday): Update all items.
(day): Update Wednesday and Saturday (typo fixes).
(abmon): Update all items, except May.
(d_fmt): Update "%d.%m.%Y" -> "%d/%m/%Y".
(LC_IDENTIFICATION): Bump the revision number and date.
Keep the "category" entries in alphabetic order.
(LC_ADDRESS): Remove no longer needed comment.
(LC_COLLATE): Use “copy "ca_ES"”.
(LC_NAME): Set the correct values of "name_fmt", "name_mr", and
"name_mrs".
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Define a new ABSOLUTE ABI for static linker's use with EI_ABIVERSION
where correct absolute (SHN_ABS) symbol run-time load semantics is
required. This way it can be ensured at static link time that a program
or DSO will not suffer from previous semantics where absolute symbols
were relocated by the base address, or symbols whose `st_value' is zero
silently ignored leading to a confusing "undefined symbol" error message
at load time, and instead "ELF file ABI version invalid" is printed with
old dynamic loaders, making it clear that there is an ABI version
incompatibility.
[BZ #19818]
[BZ #23307]
* libc-abis (ABSOLUTE): New ABI.
* sysdeps/unix/sysv/linux/mips/libc-abis (ABSOLUTE): New ABI.
* NEWS: Mention the new ABI.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The implementation falls back to renameat if renameat2 is not available
in the kernel (or in the kernel headers) and the flags argument is zero.
Without kernel support, a non-zero argument returns EINVAL, not ENOSYS.
This mirrors what the kernel does for invalid renameat2 flags.
$(file …) appears to be the only convenient way to create files
with newlines and make substitution variables. This needs make 4.0
(released in 2013), so update the requirement to match.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Unicode 11.0.0 Support: Character encoding, character type info, and
transliteration tables are all updated to Unicode 11.0.0, using
the generator scripts contributed by Mike FABIAN (Red Hat).
Some info about the number of characters added:
Total added characters in newly generated CHARMAP: 684
Total added characters in newly generated WIDTH: 119
alpha: Added 380 characters in new ctype which were not in old ctype
combining: Added 56 characters in new ctype which were not in old ctype
combining_level3: Added 37 characters in new ctype which were not in old ctype
graph: Added 684 characters in new ctype which were not in old ctype
lower: Added 82 characters in new ctype which were not in old ctype
print: Added 684 characters in new ctype which were not in old ctype
punct: Added 304 characters in new ctype which were not in old ctype
tolower: Added 79 characters in new ctype which were not in old ctype
totitle: Added 33 characters in new ctype which were not in old ctype
toupper: Added 79 characters in new ctype which were not in old ctype
upper: Added 79 characters in new ctype which were not in old ctype
No characters were removed.
[BZ #23308]
* unicode-gen/Makefile (UNICODE_VERSION): Set to 11.0.0.
* localedata/unicode-gen/DerivedCoreProperties.txt: Update to Unicode 11.0.0.
* localedata/unicode-gen/EastAsianWidth.txt: likewise.
* localedata/unicode-gen/PropList.txt: likewise.
* localedata/unicode-gen/UnicodeData.txt: likewise.
* localedata/charmaps/UTF-8: Regenerate.
* localedata/locales/i18n_ctype: likewise.
* localedata/locales/tr_TR: likewise.
* localedata/locales/translit_circle: likewise.
* localedata/locales/translit_cjk_compat: likewise.
* localedata/locales/translit_combining: likewise.
* localedata/locales/translit_compat: likewise.
* localedata/locales/translit_font: likewise.
* localedata/locales/translit_fraction: likewise.
This locale already contained correct data in mon array. Updated from
CLDR to start the month names with the lowercase letters.
alt_mon is a new import from CLDR. The change has been consulted
off-list with a native speaker.
[BZ #23140]
* localedata/locales/hy_AM (mon): Synchronize with CLDR (lowercase,
genitive case).
(alt_mon): New entry, import from CLDR (nominative case).
Some Linux distributions are experimenting with a new, separately
maintained and hopefully more agile implementation of the crypt
API. To facilitate this, add a configure option which disables
glibc's embedded libcrypt. When this option is given, libcrypt.*
and crypt.h will not be built nor installed.
The functions encrypt, setkey, encrypt_r, setkey_r, cbc_crypt,
ecb_crypt, and des_setparity should not be used in new programs,
because they use the DES block cipher, which is unacceptably weak by
modern standards. Demote all of them to compatibility symbols, and
remove their prototypes from installed headers. cbc_crypt, ecb_crypt,
and des_setparity were already compat symbols when glibc was
configured with --disable-obsolete-rpc.
POSIX requires encrypt and setkey to be available when _XOPEN_CRYPT
is defined, so this change also removes the definition of X_OPEN_CRYPT
from <unistd.h>.
The entire "DES Encryption" section is dropped from the manual, as is
the mention of AUTH_DES and FIPS 140-2 in the introduction to
crypt.texi. The documentation of 'memfrob' cross-referenced the DES
Encryption section, which is replaced by a hyperlink to libgcrypt, and
while I was in there I spruced up the actual documentation of
'memfrob' and 'strfry' a little. It's still fairly jokey, because
those functions _are_ jokes, but they do also have real use cases, so
people trying to use them for real should have all the information
they need.
DES-based authentication for Sun RPC is also insecure and should be
deprecated or even removed, but maybe that can be left as TI-RPC's
problem.
This patch fixes the OFD ("file private") locks for architectures that
support non-LFS flock definition (__USE_FILE_OFFSET64 not defined). The
issue in this case is both F_OFD_{GETLK,SETLK,SETLKW} and
F_{SET,GET}L{W}K64 expects a flock64 argument and when using old
F_OFD_* flags with a non LFS flock argument the kernel might interpret
the underlying data wrongly. Kernel idea originally was to avoid using
such flags in non-LFS syscall, but since GLIBC uses fcntl with LFS
semantic as default it is possible to provide the functionality and
avoid the bogus struct kernel passing by adjusting the struct manually
for the required flags.
The idea follows other LFS interfaces that provide two symbols:
1. A new LFS fcntl64 is added on default ABI with the usual macros to
select it for FILE_OFFSET_BITS=64.
2. The Linux non-LFS fcntl use a stack allocated struct flock64 for
F_OFD_{GETLK,SETLK,SETLKW} copy the results on the user provided
struct.
3. Keep a compat symbol with old broken semantic for architectures
that do not define __OFF_T_MATCHES_OFF64_T.
So for architectures which defines __USE_FILE_OFFSET64, fcntl64 will
aliased to fcntl and no adjustment would be required. So to actually
use F_OFD_* with LFS support the source must be built with LFS support
(_FILE_OFFSET_BITS=64).
Also F_OFD_SETLKW command is handled a cancellation point, as for
F_SETLKW{64}.
Checked on x86_64-linux-gnu and i686-linux-gnu.
[BZ #20251]
* NEWS: Mention fcntl64 addition.
* csu/check_fds.c: Replace __fcntl_nocancel by __fcntl64_nocancel.
* login/utmp_file.c: Likewise.
* sysdeps/posix/fdopendir.c: Likewise.
* sysdeps/posix/opendir.c: Likewise.
* sysdeps/unix/pt-fcntl.c: Likewise.
* include/fcntl.h (__libc_fcntl64, __fcntl64,
__fcntl64_nocancel_adjusted): New prototype.
(__fcntl_nocancel_adjusted): Remove prototype.
* io/Makefile (routines): Add fcntl64.
(CFLAGS-fcntl64.c): New rule.
* io/Versions [GLIBC_2.28] (fcntl64): New symbol.
[GLIBC_PRIVATE] (__libc_fcntl): Rename to __libc_fcntl64.
* io/fcntl.h (fcntl64): Add prototype and redirect if
__USE_FILE_OFFSET64 is defined.
* io/fcntl64.c: New file.
* manual/llio.text: Add a note for which commands fcntl acts a
cancellation point.
* nptl/Makefile (CFLAGS-fcntl64.c): New rule.
* sysdeps/mach/hurd/fcntl.c: Alias fcntl to fcntl64 symbols.
* sysdeps/mach/hurd/i386/libc.abilist [GLIBC_2.28] (fcntl, fcntl64):
New symbols.
* sysdeps/unix/sysv/linux/fcntl.c (__libc_fcntl): Fix F_GETLK64,
F_OFD_GETLK, F_SETLK64, F_SETLKW64, F_OFD_SETLK, and F_OFD_SETLKW for
non-LFS case.
* sysdeps/unix/sysv/linux/fcntl64.c: New file.
* sysdeps/unix/sysv/linux/fcntl_nocancel.c (__fcntl_nocancel): Rename
to __fcntl64_nocancel.
(__fcntl_nocancel_adjusted): Rename to __fcntl64_nocancel_adjusted.
* sysdeps/unix/sysv/linux/not-cancel.h (__fcntl_nocancel): Rename
to __fcntl64_nocancel.
* sysdeps/unix/sysv/linux/tst-ofdlocks.c: New file.
* sysdeps/unix/sysv/linux/tst-ofdlocks-compat.c: Likewise.
* sysdeps/unix/sysv/linux/Makefile (tests): Add tst-ofdlocks.
(tests-internal): Add tst-ofdlocks-compat.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist [GLIBC_2.28]
(fcntl64): New symbol.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libc.abilist [GLIBC_2.28] (fcntl,
fcntl64): Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilis: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
Kashubian language is not supported by CLDR, data copied from Wikipedia
and documents released by RJK (official Kashubian Language Council),
also consulted with a native speaker.
Note that this language also needs ab_alt_mon feature due to the month
May: nominative "môj", genitive "maja"; abbreviated nominative "môj",
abbreviated genitive "maj".
[BZ #23140]
* localedata/locales/csb_PL (mon): Rename to...
(alt_mon): This.
(abmon): Rename to...
(ab_alt_mon): This.
(mon): Add with proper genitive forms, copy from Wikipedia.
(abmon): Likewise.
This commit improves DST handling significantly in the following
ways: firstly is_dst () is overhauled to correctly process DST
sequences that would be accepted given the ELF gABI. This means that
we actually now accept slightly more sequences than before. Now we
accept $ORIGIN$ORIGIN, but in the past we accepted only $ORIGIN\0 or
$ORIGIN/..., but this kind of behaviour results in unexpected
and uninterpreted DST sequences being used as literal search paths
leading to security defects. Therefore the first step in correcting
this defect is making is_dst () properly account for all DSTs
and making the function context free in the sense that it counts
DSTs without knowledge of path, or AT_SECURE. Next, _dl_dst_count ()
is also simplified to count all DSTs regardless of context.
Then in _dl_dst_substitute () we reintroduce context-dependent
processing for such things as AT_SECURE handling. At the level of
_dl_dst_substitute we can have access to things like the true start
of the string sequence to validate $ORIGIN-based paths rooted in
trusted directories. Lastly, we tighten up the accepted sequences
in AT_SECURE, and avoid leaving known unexpanded DSTs, this is
noted in the NEWS entry.
Verified with a sequence of 68 tests on x86_64 that cover
non-AT_SECURE and AT_SECURE testing using a sysroot (requires root
to run). The tests cover cases for bug 23102, bug 21942, bug 18018,
and bug 23259. These tests are not yet appropriate for the glibc
regression testsuite, but with the upcoming test-in-container testing
framework it should be possible to include these tests upstream soon.
See the mailing list for the tests:
https://www.sourceware.org/ml/libc-alpha/2018-06/msg00251.html
As a followup of fixing bug 10871, these three languages now support two
grammatical cases of the month names.
This commit does not resolve the bug because there are more languages
to be committed.
[BZ #23140]
* localedata/locales/gd_GB (mon): Rename to...
(alt_mon): This.
(mon): Import from CLDR (genitive case).
* localedata/locales/hsb_DE (mon): Rename to...
(alt_mon): This.
(mon): Import from CLDR (genitive case).
* localedata/locales/wa_BE (mon): Rename to...
(alt_mon): This.
(mon): Add, fill with the proper genitive forms, but CLDR data
is incomplete; completed according to the comments in this file.
(d_t_fmt): Do not use "di" before the month name, no longer needed.
* localedata/locales/wa_BE (country_name): Reword
"Beljike" -> "Beldjike".
The llseek function name is an obsolete, Linux-specific, unprototyped
name for lseek64 with a link-time warning. This patch completes the
obsoletion of this function name by making it into a compat symbol,
not available for newly linked programs and not included in the ABI
for new ports.
When a compat symbol is defined in syscalls.list, the code for that
function is not built at all for static linking unless some non-compat
symbol for that function is also defined with an explicit symbol
version, so an explicit symbol version for lseek64 is added to the
MIPS n32 syscalls.list. The case in make-syscalls.sh that handles
such explicit non-compat symbol versions then needs to be changed to
use weak_alias instead of strong_alias when the syscall is built
outside of libc, to avoid linknamespace failures from a strong lseek64
symbol in static libpthread.
The x32 llseek.S was as far as I could tell already unused (nothing
builds an llseek.* source file, at least since the lseek / lseek64 /
llseek consolidation), so is removed in this patch as well.
Tested for x86_64 and x86, and with build-many-glibcs.py.
[BZ #18471]
* sysdeps/unix/make-syscalls.sh (emit_weak_aliases): Use weak
aliases for non-libc case of versioned symbols.
* sysdeps/unix/sysv/linux/lseek64.c: Include <shlib-compat.h>.
(llseek): Define as compat symbol if
[SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_28)], not as weak alias
with link warning.
* sysdeps/unix/sysv/linux/mips/mips64/n32/syscalls.list (llseek):
Make into a compat symbol, disabled for minimum symbol version
GLIBC_2.28 and later.
* sysdeps/unix/sysv/linux/x86_64/x32/llseek.S: Remove file.
The Linux nfsservctl syscall was removed in Linux 3.1. Since the
minimum kernel version for use with glibc is 3.2, the glibc wrapper
for this syscall can no longer usefully be called. This patch makes
it into a compat symbol, not provided at all for static linking or new
ports. (It was already the case that there was no header declaration
of this function.)
Tested for x86_64.
* sysdeps/unix/sysv/linux/syscalls.list (nfsservctl): Make into a
compat symbol, disabled for minimum symbol version GLIBC_2.28 and
later.
