Problem reported by Stefan Liebler in:
https://sourceware.org/ml/libc-alpha/2019-08/msg00658.html
* posix/tst-regex.c: Convert this file from Latin-1 to UTF-8.
(do_test, test_expr): Adjust to the fact that this source file,
and the test data in ChangeLog.8, is now UTF-8 instead of Latin-1.
* posix/tst-regex.input: Copy from ChangeLog.old/ChangeLog.8,
so that it is now UTF-8.
fegetenv_status() wants to use the lighter weight instruction 'mffsl'
for reading the Floating-Point Status and Control Register (FPSCR).
It currently will use it directly if compiled '-mcpu=power9', and will
perform a runtime check (cpu_supports("arch_3_00")) otherwise.
Nicely, it turns out that the 'mffsl' instruction will decode to
'mffs' on architectures older than "arch_3_00" because the additional
bits set for 'mffsl' are "don't care" for 'mffs'. 'mffs' is a superset
of 'mffsl'.
So, just generate 'mffsl'.
fesetenv() reads the current value of the Floating-Point Status and Control
Register (FPSCR) to determine the difference between the current state of
exception enables and the newly requested state. All of these bits are also
returned by the lighter weight 'mffsl' instruction used by fegetenv_status().
Use that instead.
Also, remove a local macro _FPU_MASK_ALL in favor of a common macro,
FPU_ENABLES_MASK from fenv_libc.h.
Finally, use a local variable ('new') in favor of a pointer dereference
('*envp').
SET_RESTORE_ROUND uses libc_feholdsetround_ppc_ctx and
libc_feresetround_ppc_ctx to bracket a block of code where the floating point
rounding mode must be set to a certain value.
For the *prologue*, libc_feholdsetround_ppc_ctx is used and performs:
1. Read/save FPSCR.
2. Create new value for FPSCR with new rounding mode and enables cleared.
3. If new value is different than current value,
a. If transitioning from a state where some exceptions enabled,
enter "ignore exceptions / non-stop" mode.
b. Write new value to FPSCR.
c. Put a mark on the wall indicating the FPSCR was changed.
(1) uses the 'mffs' instruction. On POWER9, the lighter weight 'mffsl'
instruction can be used, but it doesn't return all of the bits in the FPSCR.
fegetenv_status uses 'mffsl' on POWER9, 'mffs' otherwise, and can thus be
used instead of fegetenv_register.
(3b) uses 'mtfsf 0b11111111' to write the entire FPSCR, so it must
instead use 'mtfsf 0b00000011' to write just the enables and the mode,
because some of the rest of the bits are not valid if 'mffsl' was used.
fesetenv_mode uses 'mtfsf 0b00000011' on POWER9, 'mtfsf 0b11111111'
otherwise.
For the *epilogue*, libc_feresetround_ppc_ctx checks the mark on the wall, then
calls libc_feresetround_ppc, which just calls __libc_femergeenv_ppc with
parameters such that it performs:
1. Retreive saved value of FPSCR, saved in prologue above.
2. Read FPSCR.
3. Create new value of FPSCR where:
- Summary bits and exception indicators = current OR saved.
- Rounding mode and enables = saved.
- Status bits = current.
4. If transitioning from some exceptions enabled to none,
enter "ignore exceptions / non-stop" mode.
5. If transitioning from no exceptions enabled to some,
enter "catch exceptions" mode.
6. Write new value to FPSCR.
The summary bits are hardwired to the exception indicators, so there is no
need to restore any saved summary bits.
The exception indicator bits, which are sticky and remain set unless
explicitly cleared, would only need to be restored if the code block
might explicitly clear any of them. This is certainly not expected.
So, the only bits that need to be restored are the enables and the mode.
If it is the case that only those bits are to be restored, there is no need to
read the FPSCR. Steps (2) and (3) are unnecessary, and step (6) only needs to
write the bits being restored.
We know we are transitioning out of "ignore exceptions" mode, so step (4) is
unnecessary, and in step (6), we only need to check the state we are
entering.
Since fe{en,dis}ableexcept() and fesetmode() read-modify-write just the
"mode" (exception enable and rounding mode) bits of the Floating Point Status
Control Register (FPSCR), the lighter weight 'mffsl' instruction can be used
to read the FPSCR (enables and rounding mode), and 'mtfsf 0b00000011' can be
used to write just those bits back to the FPSCR. The net is better performance.
In addition, fe{en,dis}ableexcept() read the FPSCR again after writing it, or
they determine that it doesn't need to be written because it is not changing.
In either case, the local variable holds the current values of the enable
bits in the FPSCR. This local variable can be used instead of again reading
the FPSCR.
Also, that value of the FPSCR which is read the second time is validated
against the requested enables. Since the write can't fail, this validation
step is unnecessary, and can be removed. Instead, the exceptions to be
enabled (or disabled) are transformed into available bits in the FPSCR,
then validated after being transformed back, to ensure that all requested
bits are actually being set. For example, FE_INVALID_SQRT can be
requested, but cannot actually be set. This bit is not mapped during the
transformations, so a test for that bit being set before and after
transformations will show the bit would not be set, and the function will
return -1 for failure.
Finally, convert the local macros in fesetmode.c to more generally useful
macros in fenv_libc.h.
The exceptions passed to fe{en,dis}ableexcept() are defined in the ABI
as a bitmask, a combination of FE_INVALID, FE_OVERFLOW, etc.
Within the functions, these bits must be translated to/from the corresponding
enable bits in the Floating Point Status Control Register (FPSCR).
This translation is currently done bit-by-bit. The compiler generates
a series of conditional bit operations. Nicely, the "FE" exception
bits are all a uniform offset from the FPSCR enable bits, so the bit-by-bit
operation can instead be performed by a shift with appropriate masking.
Both the buffer and struct mntent are now allocated on the heap.
This results in a slight reduction of RSS usage.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The internal_getut_r function updates the file_offset variable and
therefore must always update last_entry as well.
Previously, if pututxline could not upgrade the read lock to a
write lock, internal_getut_r would update file_offset only,
without updating last_entry, and a subsequent call would not
overwrite the existing utmpx entry at file_offset, instead
creating a new entry. This has been observed to cause unbounded
file growth in high-load situations.
This commit removes the buffer argument to internal_getut_r and
updates the last_entry variable directly, along with file_offset.
Initially reported and fixed by Ondřej Lysoněk.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
The recent commit e6855a3bdf
changed the encoding of ChangeLog.old/ChangeLog.8 from ISO-8859 to UTF-8.
Unfortunately the test posix/tst-regex assumes the former encoding.
Furthermore Francesco Potortì is now written with 'ì' instead of 'i`'
which would lead to two further matches in the first call to test_expr.
This patch just copies the former ChangeLog.8 file to tst-regex.input
and adjusts the test in order to use this new input file.
ChangeLog:
* posix/tst-regex.c (do_test): Use tst-regex.input as input file.
* posix/tst-regex.input: New file.
Move non-ASCII contributor names from installed headers
into contrib.texi when possible, and when it's not (the
copyright notice in sysdeps/unix/sysv/linux/mips/sys/user.h)
go back to ASCIIfied names. Problem reported by Joseph Myers in:
https://www.sourceware.org/ml/libc-alpha/2019-08/msg00646.html
This bumps the highest valid EI_ABIVERSION value to ABSOLUTE ABI.
New testcase loads the symbol from the GOT with the "lb" instruction
so that the EI_ABIVERSION header field of the shared object is set
to ABSOLUTE (it doesn't actually check the value of the symbol), and
makes sure that the main executable is executed without "ABI version
invalid" error.
Tested for all three ABIs (o32, n32, n64) using both static linker which
handles undefined weak symbols correctly [1] (and sets the EI_ABIVERSION
of the test module) and the one that doesn't (EI_ABIVERSION left as 0).
[1] https://sourceware.org/ml/binutils/2018-07/msg00268.html
[BZ #24916]
* sysdeps/mips/Makefile [$(subdir) = elf] (tests): Add
tst-undefined-weak.
[$(subdir) = elf] (modules-names): Add tst-undefined-weak-lib.
[$(subdir) = elf] ($(objpfx)tst-undefined-weak): Add dependency.
* sysdeps/mips/tst-undefined-weak-lib.S: New file.
* sysdeps/mips/tst-undefined-weak.c: Likewise.
* sysdeps/unix/sysv/linux/mips/ldsodefs.h (VALID_ELF_ABIVERSION):
Increment highest valid ABIVERSION value.
Linux/Mips kernels prior to 4.8 could potentially crash the user
process when doing FPU emulation while running on non-executable
user stack.
Currently, gcc doesn't emit .note.GNU-stack for mips, but that will
change in the future. To ensure that glibc can be used with such
future gcc, without silently resulting in binaries that might crash
in runtime, this patch forces RWX stack for all built objects if
configured to run against minimum kernel version less than 4.8.
* sysdeps/unix/sysv/linux/mips/Makefile
(test-xfail-check-execstack):
Move under mips-has-gnustack != yes.
(CFLAGS-.o*, ASFLAGS-.o*): New rules.
Apply -Wa,-execstack if mips-force-execstack == yes.
* sysdeps/unix/sysv/linux/mips/configure: Regenerated.
* sysdeps/unix/sysv/linux/mips/configure.ac
(mips-force-execstack): New var.
Set to yes for hard-float builds with minimum_kernel < 4.8.0
or minimum_kernel not set at all.
(mips-has-gnustack): New var.
Use value of libc_cv_as_noexecstack
if mips-force-execstack != yes, otherwise set to no.
As indicated by Joseph's comment on BZ#17726, this symbol is most
likely a historical ABI accident. This patch make it on both arm
and sparc ABIs a compat_symbol.
Checked against a build arm-linux-gnueabihf, sparcv9-linux-gnu, adn
sparc64-linux-gnu to see if the symbol is still present.
* gmon/Versions (libc) [GLIBC_2.31]: New entry.
* sysdeps/unix/sysv/linux/arm/profil-counter.h (profil_counter):
Make a compat_symbol.
* sysdeps/unix/sysv/linux/sparc/profil-counter.h
(__profil_counter_global): Likewise.
This patch refactor sigcontextinfo.h header to use SA_SIGINFO as default
for both gmon and debug implementations. This allows simplify
profil-counter.h on Linux to use a single implementation and remove the
requirements for newer ports to redefine __sigaction/sigaction to use
SA_SIGINFO.
The GET_PC macro is also replaced with a function sigcontext_get_pc that
returns an uintptr_t instead of a void pointer. It allows easier convertion
to integer on ILP32 architecture, such as x32, without the need to suppress
compiler warnings.
The patch also requires some refactor of register-dump.h file for some
architectures (to reflect it is now called from a sa_sigaction instead of
sa_handler signal context).
- Alpha, i386, and s390 are straighfoward to take in consideration the
new argument type.
- ia64 takes in consideration the kernel pass a struct sigcontextt
as third argument for sa_sigaction.
- sparc take in consideration the kernel pass a pt_regs struct
as third argument for sa_sigaction.
- m68k dummy function is removed and the FP state is dumped on
register_dump itself.
- For SH the register-dump.h file is consolidate on a common implementation
and the floating-point state is checked based on ownedfp field.
The register_dump does not change its output format in any affected
architecture.
I checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu,
arm-linux-gnueabihf, sparcv9-linux-gnu, sparc64-linux-gnu, powerpc-linux-gnu,
powerpc64-linux-gnu, and powerpc64le-linux-gnu.
I also checked the libSegFault.so through catchsegv on alpha-linux-gnu,
m68k-linux-gnu and sh4-linux-gnu to confirm the output has not changed.
Adhemerval Zanella <adhemerval.zanella@linaro.org>
Florian Weimer <fweimer@redhat.com>
* debug/segfault.c (install_handler): Use SA_SIGINFO if defined.
* sysdeps/generic/profil-counter.h (__profil_counter): Cast to
uintptr_t.
* sysdeps/generic/sigcontextinfo.h (GET_PC): Rename to
sigcontext_get_pc and return aligned cast to uintptr_t.
* sysdeps/mach/hurd/i386/sigcontextinfo.h (GET_PC): Likewise.
* sysdeps/posix/profil.c (profil_count): Change PC argument to
uintptr_t.
(__profil): Use SA_SIGINFO.
* sysdeps/posix/sprofil.c (profil_count): Change PCP argument to
uintptr_t.
(__sprofil): Use SA_SIGINFO.
* sysdeps/unix/sysv/linux/profil-counter.h: New file.
* sysdeps/unix/sysv/linux/aarch64/profil-counter.h: Remove file.
* sysdeps/unix/sysv/linux/csky/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/hppa/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/i386/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/ia64/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/microblaze/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/mips/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/nios2/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/riscv/profil-counter.h: Likewise.
* sysdeps/sysv/linux/s390/s390-32/profil-counter.h: Likewise.
* sysdeps/sysv/linux/s390/s390-64/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/sh/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/arm/profil-counter.h (__profil_counter):
Assume SA_SIGINFO and use sigcontext_get_pc instead of GET_PC.
* sysdeps/unix/sysv/linux/sparc/profil-counter.h: New file.
* sysdeps/unix/sysv/linux/sparc/sparc64/profil-counter.h: Remove file.
* sysdeps/unix/sysv/linux/sparc/sparc32/profil-counter.h: Likewise.
* sysdpes/unix/sysv/linux/aarch64/sigcontextinfo.h (SIGCONTEXT,
GET_PC, __sigaction, sigaction): Remove defines.
(sigcontext_get_pc): New function.
* sysdeps/unix/sysv/linux/alpha/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/arm/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/csky/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/hppa/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/i386/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/ia64/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/m68k/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/mips/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/nios2/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/s390/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/microblaze/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/riscv/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/sh/sigcontextinfo.h: Likewise.
* sysdeps/sysv/linux/sparc/sparc32/sigcontextinfo.h: Likewise.
* sysdeps/sysv/linux/sparc/sparc64/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/alpha/register-dump.h (register_dump):
Handle CTX argument as ucontext_t.
* sysdeps/unix/sysv/linux/i386/register-dump.h: Likewise.
Likewise.
* sysdeps/unix/sysv/linux/m68k/register-dump.h: Likewise.
* sysdeps/sysv/linux/s390/s390-32/register-dump.h: Likewise.
* sysdeps/sysv/linux/s390/s390-64/register-dump.h: Likewise.
* sysdeps/unix/sysv/linux/sh/register-dump.h: New file.
* sysdeps/unix/sysv/linux/sh/sh4/register-dump.h: Remove File.
* sysdeps/unix/sysv/linux/sh/sh3/register-dump.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/register-dump.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/register-dump.h: Likewise.
* sysdeps/unix/sysv/linux/Makefile (tests-internal): Add
tst-sigcontextinfo-get_pc.
* sysdeps/unix/sysv/linux/tst-sigcontextinfo-get_pc.c: New file.
(CFLAGS-tst-sigcontextinfo-get_pc.c): New rule.
The first day of the week in China (Mainland) should be Monday according
to the national standard GB/T 7408-2005. References:
* https://www.doc88.com/p-1166696540287.html
* https://unicode-org.atlassian.net/browse/CLDR-11510
[BZ #24682]
* localedata/locales/bo_CN (first_weekday): Add, set to 2 (Monday).
* localedata/locales/ug_CN (first_weekday): Likewise.
* localedata/locales/zh_CN (first_weekday): Likewise.
Fix a couple of typos and v_regs field name in mcontext_t.
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h: Fix typos and
field name in mcontext_t struct.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
When using a system (e.g. Ubuntu 18.04) with libidn2 2.0.4 or earlier,
test results include:
FAIL: resolv/tst-resolv-ai_idn
FAIL: resolv/tst-resolv-ai_idn-latin1
It was previously stated
<https://sourceware.org/ml/libc-alpha/2018-05/msg00771.html> that "It
should fail to indicate you have bugs in your system libidn.".
However, the glibc testsuite should be indicating whether there are
bugs in glibc, not whether there are bugs in other system pieces - so
unless you consider it a glibc bug that it fails to work around the
libidn issues, these FAILs are not helpful. And as a general
principle, it's best for the expected glibc test results to be clean,
with Bugzilla used to track known bugs in glibc itself, rather than
people needing to know about the expected FAILs to tell if there are
problems with their glibc build. So, while there is an argument that
install.texi (not just the old NEWS entries for 2.28) should explain
the use of libidn2 and that 2.0.5 or later is recommended, test FAILs
are not the right way to indicate the presence of an old libidn2
version.
This patch accordingly makes those tests return UNSUPPORTED for older
libidn2 versions, just as they do when libidn2 isn't present at all.
As implied by that past discussion, it's possible this could result in
UNSUPPORTED for systems with older versions but whatever required
fixes backported so the tests previously passed, if there are any such
systems.
Tested for x86_64 on Ubuntu 18.04, including verifying that putting an
earlier version in place of 2.0.5 results in the tests FAILing whereas
using 2.0.5 as in the patch results in UNSUPPORTED. Florian reports
that the tests still run on Fedora 30, with libidn 2.2.0.
* resolv/tst-resolv-ai_idn-latin1.c (do_test): Mark test
unsupported with libidn2 before 2.0.5.
* resolv/tst-resolv-ai_idn.c (do_test): Likewise.
C2X standardizes strftime %Ob and %OB support. This patch updates the
glibc manual to say these are C2X features, while noting that the
details of what is the alternative form of a month name are not
specified in C2X.
Note: C2X seems unclear to me about whether %h being equivalent to %b
means %Oh is thereby allowed and equivalent to %Ob; I've asked WG14.
Tested with "make info" and "make pdf".
* manual/time.texi (strftime): Document %Ob and %OB as C2X
features.
This was found by Coverity (CID 1484201). [BZ#24844]
* posix/regex_internal.c (create_cd_newstate): Fix use of bad
pointer and/or memory leak when storage is exhausted.
It doesn't make sense to remove all the internal uses of time.
It's still a standard ISO C function, and its callers don't need
sub-second resolution and would be unnecessarily complicated if
they had to declare a struct timespec instead of just a time_t.
However, a handful of places were using the vestigial "result"
argument instead of the return value, which is slightly less
efficient and also looks strange. Correct this.
* misc/syslog.c (__vsyslog_internal)
* time/getdate.c (__getdate_r)
* time/tst_wcsftime.c (main):
Use return value of time, not its argument.
* string/strfry.c (strfry)
* sysdeps/mach/sleep.c (__sleep):
Remove unnecessary casts of NULL in calls to time.
When adding some of the TS 18661 narrowing functions for glibc 2.28, I
deferred adding corresponding <tgmath.h> support because of unresolved
questions about the specification for those type-generic macros,
especially in relation to _FloatN and _FloatNx types.
Those issues are now clarified in the response to Clarification
Request 13 to TS 18661-3, and this patch adds the deferred tgmath.h
support. As with other tgmath.h macros, there are fairly
straightforward implementations based on __builtin_tgmath for GCC 8
and later, which result in exactly the right function being called in
each case, and more complicated implementations for GCC 7 and earlier,
which generally result in a function being called whose arguments have
the right format (i.e. an alias for the right function), but which
might not be exactly the function name specified by TS 18661.
In one case with older compilers (f32x* macros, where the type
_Float64x exists and all the arguments have type _Float32 or
_Float32x), there is a further relaxation and the function called may
have arguments narrower than the one specified by the TS, but still
wide enough to represent the arguments exactly, so the result of the
call is unchanged (as this does not affect any case where rounding of
integer arguments might be involved). With GCC 6 or before this is
inherently unavoidable (but still harmless and not detectable by how
the compiled program behaves, unless it redefines the functions in
question like the testcases do) because _Float32x and _Float64 are
both typedefs for double in that case but the specified semantics
result in different functions, with different argument formats, being
called for those two argument types.
Tests for the new macros are handled through gen-tgmath-tests.py,
which deals with the special-case handling for older GCC.
Tested as follows: with the full glibc testsuite on x86_64 and x86
(with GCC 6, 7 and 8); with the math/ tests on aarch64 and arm (with
GCC 6, 7 and 8); with build-many-glibcs.py (with GCC 6, 7 and 9).
* math/tgmath.h [__HAVE_FLOAT128X]: Give error.
[(__HAVE_FLOAT64X && !__HAVE_FLOAT128)
|| (__HAVE_FLOAT128 && !__HAVE_FLOAT64X)]: Likewise.
(__TGMATH_2_NARROW_F): Likewise.
(__TGMATH_2_NARROW_D): New macro.
(__TGMATH_2_NARROW_F16): Likewise.
(__TGMATH_2_NARROW_F32): Likewise.
(__TGMATH_2_NARROW_F64): Likewise.
(__TGMATH_2_NARROW_F32X): Likewise.
(__TGMATH_2_NARROW_F64X): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_NARROW_FUNCS_F): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_NARROW_FUNCS_F16): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_NARROW_FUNCS_F32): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_NARROW_FUNCS_F64): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_NARROW_FUNCS_F32X): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (fadd): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (dadd): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (fdiv): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (ddiv): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (fmul): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (dmul): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (fsub): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (dsub): Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT16] (f16add):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT16] (f16div):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT16] (f16mul):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT16] (f16sub):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32] (f32add):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32] (f32div):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32] (f32mul):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32] (f32sub):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64
&& (__HAVE_FLOAT64X || __HAVE_FLOAT128)] (f64add): Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64
&& (__HAVE_FLOAT64X || __HAVE_FLOAT128)] (f64div): Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64
&& (__HAVE_FLOAT64X || __HAVE_FLOAT128)] (f64mul): Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64
&& (__HAVE_FLOAT64X || __HAVE_FLOAT128)] (f64sub): Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32X] (f32xadd):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32X] (f32xdiv):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32X] (f32xmul):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32X] (f32xsub):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64X
&& (__HAVE_FLOAT128X || __HAVE_FLOAT128)] (f64xadd): Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64X
&& (__HAVE_FLOAT128X || __HAVE_FLOAT128)] (f64xdiv): Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64X
&& (__HAVE_FLOAT128X || __HAVE_FLOAT128)] (f64xmul): Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64X
&& (__HAVE_FLOAT128X || __HAVE_FLOAT128)] (f64xsub): Likewise.
* math/gen-tgmath-tests.py (Type): Add members
non_standard_real_argument_types_list, long_double_type,
complex_float64_type and float32x_ext_type.
(Type.__init__): Set the new members.
(Type.floating_type): Add new argument floatn.
(Type.real_floating_type): Likewise.
(Type.can_combine_types): Likewise.
(Type.combine_types): Likewise.
(Type.init_types): Create internal Float32x_ext type.
(Tests.__init__): Define Float32x_ext in generated C code.
(Tests.add_tests): Handle narrowing functions.
(Tests.add_all_tests): Likewise.
(Tests.tests_text): Allow variation in mant_dig for narrowing
functions with compilers before GCC 8.
* math/Makefile (tgmath3-narrow-types): New variable.
(tgmath3-narrow-macros): Likewise.
(tgmath3-macros): Add $(tgmath3-narrow-macros).
This change adds a warning to nscd.conf about running multiple caching
services together and that it may lead to unexpected behaviours. Also we
add a note that enabling the 'shared' option will cause cache hit rates
to be misreported (a side effect of the implementation).
v2
- Rewrite comment to avoid implementation details.
The current default nsswitch.conf file provided by glibc is not very
distribution friendly. The file contains some minimal directives that no
real distribution uses. This update aims to provide a rich set of
comments which are useful for all distributions, and a broader set of
service defines which should work for all distributions.
Tested defaults on x86_64 and they work. The nsswitch.conf file more
closely matches what we have in Fedora now, and I'll adjust Fedora to
use this version with minor changes to enable Fedora-specific service
providers.
v2
- Add missing databases to manual.
- Add link to manual from default nsswitch.conf.
- Sort nsswitch.conf according to most used database first.
v3
- Only mention implemented services in 'NSS Basics.'
- Mention 'automount' in 'Services in the NSS configuration.'
- Sort services in alphabetical order.
v4
- Project name is 'Samba'.
v5
- Fix typo in manual/nss.texi.
v6
- Fix another typo in manual/nss.texi. Ran spell checker this time.
If the process is in a bad state, we used to print backtraces in
many cases. This is problematic because doing so could involve
a lot of work, like loading libgcc_s using the dynamic linker,
and this could itself be targeted by exploit writers. For example,
if the crashing process was forked from a long-lived process, the
addresses in the error message could be used to bypass ASLR.
Commit ed421fca42 ("Avoid backtrace from
__stack_chk_fail [BZ #12189]"), backtraces where no longer printed
because backtrace_and_maps was always called with do_abort == 1.
Rather than fixing this logic error, this change removes the backtrace
functionality from the sources. With the prevalence of external crash
handlers, it does not appear to be particularly useful. The crash
handler may also destroy useful information for debugging.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
I noticed that the totalorder compat tests mixed TEST_COMPAT
conditions using COMPAT_VER (computed as the first symbol version for
the symbol being tested) and those with a hardcoded GLIBC_2_25.
COMPAT_VER is logically correct here, so this patch changes the tests
to use it. GLIBC_2_25 is harmless at present (even for _FloatN /
_FloatNx functions added in later glibc versions). However, if in
future we support _Float16 functions in glibc for any existing
configuration, the test using GLIBC_2_25 would get things wrong
(wrongly think that there are compat versions of totalorderf16 and
totalordermagf16 to test).
(The actual definitions of the compat / versioned symbols for the
totalorder functions make no attempt to deal with the possibility of
libm function support for a new floating-point format, already
supported for other architectures in glibc, being added in some glibc
configuration in future, for which the only vaguely plausible case
would be if some architecture gets _Float128 support it previously
lacked; this is much like functions added after glibc 2.4 not
generally attempting to deal with compat support for long double
changing away from having the same format as double.)
Tested for x86_64, and with build-many-glibcs.py.
* math/libm-test-compat_totalorder.inc (do_test)
[TEST_COMPAT (libm, GLIBC_2_25, GLIBC_2_31)]: Change condition to
[TEST_COMPAT (libm, COMPAT_VER, GLIBC_2_31)].
* math/libm-test-compat_totalordermag.inc (do_test)
[TEST_COMPAT (libm, GLIBC_2_25, GLIBC_2_31)]: Likewise.
In case of an explicit loader invocation, ld.so essentially performs
a dlopen call to load the main executable. Since the pathname of
the executable is known at this point, it gets stored in the link
map. In regular mode, the pathname is not known and "" is used
instead.
As a result, if a program calls dlopen on the pathname of the main
program, the dlopen call succeeds and returns a handle for the main
map. This results in an unnecessary difference between glibc
testing (without --enable-hardcoded-path-in-tests) and production
usage.
This commit discards the names when building the link map in
_dl_new_object for the main executable, but it still determines
the origin at this point in case of an explict loader invocation.
The reason is that the specified pathname has to be used; the kernel
has a different notion of the main executable.
The resolution of C floating-point Clarification Request 25
<http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2397.htm#dr_25> is
that the totalorder and totalordermag functions should take pointer
arguments, and this has been adopted in C2X (with const added; note
that the integration of this change into C2X is present in the C
standard git repository but postdates the most recent public PDF
draft).
This patch updates glibc accordingly. As a defect resolution, the API
is changed unconditionally rather than supporting any sort of TS
18661-1 mode for compilation with the old version of the API. There
are compat symbols for existing binaries that pass floating-point
arguments directly. As a consequence of changing to pointer
arguments, there are no longer type-generic macros in tgmath.h for
these functions.
Because of the fairly complicated logic for creating libm function
aliases and determining the set of aliases to create in a given glibc
configuration, rather than duplicating all that in individual source
files to create the versioned and compat symbols, the source files for
the various versions of totalorder functions are set up to redefine
weak_alias before using libm_alias_* macros to create the symbols
required. In turn, this requires creating a separate alias for each
symbol version pointing to the same implementation (see binutils bug
<https://sourceware.org/bugzilla/show_bug.cgi?id=23840>), which is
done automatically using __COUNTER__. (As I noted in
<https://sourceware.org/ml/libc-alpha/2018-10/msg00631.html>, it might
well make sense for glibc's symbol versioning macros to do that alias
creation with __COUNTER__ themselves, which would somewhat simplify
the logic in the totalorder source files.)
It is of course desirable to test the compat symbols. I did this with
the generic libm-test machinery, but didn't wish to duplicate the
actual tables of test inputs and outputs, and thought it risky to
attempt to have a single object file refer to both default and compat
versions of the same function in order to test them together. Thus, I
created libm-test-compat_totalorder.inc and
libm-test-compat_totalordermag.inc which include the generated .c
files (with the processed version of those tables of inputs) from the
non-compat tests, and added appropriate dependencies. I think this
provides sufficient test coverage for the compat symbols without also
needing to make the special ldbl-96 and ldbl-128ibm tests (of
peculiarities relating to the representations of those formats that
can't be covered in the generic tests) run for the compat symbols.
Tests of compat symbols need to be internal tests, meaning _ISOMAC is
not defined. Making some libm-test tests into internal tests showed
up two other issues. GCC diagnoses duplicate macro definitions of
__STDC_* macros, including __STDC_WANT_IEC_60559_TYPES_EXT__; I added
an appropriate conditional and filed
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=91451> for this issue.
On ia64, include/setjmp.h ends up getting included indirectly from
libm-symbols.h, resulting in conflicting definitions of the STR macro
(also defined in libm-test-driver.c); I renamed the macros in
include/setjmp.h. (It's arguable that we should have common internal
headers used everywhere for stringizing and concatenation macros.)
Tested for x86_64 and x86, and with build-many-glibcs.py.
* math/bits/mathcalls.h
[__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN]
(totalorder): Take pointer arguments.
[__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN]
(totalordermag): Likewise.
* manual/arith.texi (totalorder): Likewise.
(totalorderf): Likewise.
(totalorderl): Likewise.
(totalorderfN): Likewise.
(totalorderfNx): Likewise.
(totalordermag): Likewise.
(totalordermagf): Likewise.
(totalordermagl): Likewise.
(totalordermagfN): Likewise.
(totalordermagfNx): Likewise.
* math/tgmath.h (__TGMATH_BINARY_REAL_RET_ONLY): Remove macro.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag): Likewise.
* math/Versions (GLIBC_2.31): Add totalorder, totalorderf,
totalorderl, totalordermag, totalordermagf, totalordermagl,
totalorderf32, totalorderf64, totalorderf32x, totalordermagf32,
totalordermagf64, totalordermagf32x, totalorderf64x,
totalordermagf64x, totalorderf128 and totalordermagf128.
* math/Makefile (libm-test-funcs-noauto): Add compat_totalorder
and compat_totalordermag.
(libm-test-funcs-compat): New variable.
(libm-tests-compat): Likewise.
(tests): Do not include compat tests.
(tests-internal): Add compat tests.
($(foreach t,$(libm-tests-base),
$(objpfx)$(t)-compat_totalorder.o)): Depend
on $(objpfx)libm-test-totalorder.c.
($(foreach t,$(libm-tests-base),
$(objpfx)$(t)-compat_totalordermag.o): Depend on
$(objpfx)libm-test-totalordermag.c.
(tgmath3-macros): Remove totalorder and totalordermag.
* math/libm-test-compat_totalorder.inc: New file.
* math/libm-test-compat_totalordermag.inc: Likewise.
* math/libm-test-driver.c (struct test_ff_i_data): Update comment.
(RUN_TEST_fpfp_b): New macro.
(RUN_TEST_LOOP_fpfp_b): Likewise.
* math/libm-test-totalorder.inc (totalorder_test_data): Use
TEST_fpfp_b.
(totalorder_test): Condition on [!COMPAT_TEST].
(do_test): Likewise.
* math/libm-test-totalordermag.inc (totalordermag_test_data): Use
TEST_fpfp_b.
(totalordermag_test): Condition on [!COMPAT_TEST].
(do_test): Likewise.
* math/gen-tgmath-tests.py (Tests.add_all_tests): Remove
totalorder and totalordermag.
* math/test-tgmath.c (NCALLS): Change to 132.
(F(compile_test)): Do not call totalorder or totalordermag.
(F(totalorder)): Remove.
(F(totalordermag)): Likewise.
* include/float.h (__STDC_WANT_IEC_60559_TYPES_EXT__): Do not
define if [__STDC_WANT_IEC_60559_TYPES_EXT__].
* include/setjmp.h [!_ISOMAC] (STR_HELPER): Rename to
SJSTR_HELPER.
[!_ISOMAC] (STR): Rename to SJSTR. Update call to STR_HELPER.
[!_ISOMAC] (TEST_SIZE): Update call to STR.
[!_ISOMAC] (TEST_ALIGN): Likewise.
[!_ISOMAC] (TEST_OFFSET): Likewise.
* sysdeps/ieee754/dbl-64/s_totalorder.c: Include <shlib-compat.h>
and <first-versions.h>.
(__totalorder): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/dbl-64/s_totalordermag.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermag): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalorder): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermag): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/float128/float128_private.h
(__totalorder_compatl): New macro.
(__totalordermag_compatl): Likewise.
* sysdeps/ieee754/flt-32/s_totalorderf.c: Include <shlib-compat.h>
and <first-versions.h>.
(__totalorderf): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/flt-32/s_totalordermagf.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermagf): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-128/s_totalorderl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalorderl): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/ldbl-128/s_totalordermagl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermagl): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Include
<shlib-compat.h>.
(__totalorderl): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c: Include
<shlib-compat.h>.
(__totalordermagl): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-96/s_totalorderl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalorderl): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/ldbl-96/s_totalordermagl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermagl): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c (totalorderl): Take
pointer arguments.
* sysdeps/ieee754/ldbl-opt/nldbl-totalordermag.c (totalordermagl):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c
(do_test): Update calls to totalorderl and totalordermagl.
* sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c (do_test):
Update calls to totalorderl and totalordermagl.
* sysdeps/mach/hurd/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/csky/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
Commit 7532837d7b ("The
-Wstringop-truncation option new in GCC 8 detects common misuses")
added __attribute_nonstring__ to bits/utmp.h, but it did not update
the parallel bits/utmpx.h header. In struct utmp, the nonstring
attribute for ut_id was missing.
Commit 06ab719d30 ("Fix Linux fcntl OFD
locks for non-LFS architectures (BZ#20251)") introduced the use of
fcntl64 into the utmp implementation. However, the lock file
structure was not updated to struct flock64 at that point.
If the file processing takes a long time for some reason, SIGALRM can
arrive while the file is still being processed. At that point, file
access will fail with EINTR. Disarming the timer after lock
acquisition avoids that. (If there was a previous alarm, it is the
responsibility of the caller to deal with the EINTR error.)
Commit 5a3afa9738 (login: Replace
macro-based control flow with function calls in utmp) introduced
a regression because after it, __libc_updwtmp attempts to unlock
the wrong file descriptor.
* sysdeps/aarch64/multiarch/memset_base64.S (DC_ZVA_THRESHOLD):
Disable DC ZVA code if this macro is defined as zero.
* sysdeps/aarch64/multiarch/memset_emag.S (DC_ZVA_THRESHOLD):
Change to zero to disable using DC ZVA.
C2X (current version in git, postdating the most recent public draft
available as a PDF on the WG14 website) adds the interfaces from TS
18661-4, other than the reduction functions, as unconditionally
required and visible in <math.h> for hosted implementations; the
__STDC_WANT_IEC_60559_FUNCS_EXT__ macro is not included in C2X at all
(as the reduction functions aren't included at all, expected to end up
in a version of the TS updated to be relative to C2X).
This patch updates the glibc headers accordingly, following the same
pattern used for 18661-1 functions. As the only 18661-4 functions
currently supported are the exp10 functions that have been in glibc
for a very long time, this means that in fact __GLIBC_USE
(IEC_60559_FUNCS_EXT) ends up being used only to determine the
definition of __GLIBC_USE_IEC_60559_FUNCS_EXT_C2X, not yet in any
headers other than bits/libc-header-start.h.
(I hope to add the other 18661-4 functions to glibc at some point; the
main complication is the current lack of MPFR support for many of
these functions.)
Tested for x86_64.
* bits/libc-header-start.h (__GLIBC_USE_IEC_60559_FUNCS_EXT):
Update comment.
(__GLIBC_USE_IEC_60559_FUNCS_EXT_C2X): New macro.
* bits/math-finite.h [__GLIBC_USE (IEC_60559_FUNCS_EXT)]: Change
to [__GLIBC_USE (IEC_60559_FUNCS_EXT_C2X)].
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_FUNCS_EXT)]:
Likewise.
C2X adds the memccpy, strdup and strndup functions. This patch duly
adds __GLIBC_USE (ISOC2X) to the conditions under which <string.h>
declares them.
Tested for x86_64.
* string/string.h (memccpy): Also declare if [__GLIBC_USE (ISOC2X)].
(strdup): Likewise.
(strndup): Likewise.
