TLS_INIT_TP in sysdeps/i386/nptl/tls.h uses some hand written asm to
generate a set_thread_area that might result in exchanging ebx and esp
around the syscall causing introspection tools like valgrind to loose
track of the user stack. Just use INTERNAL_SYSCALL which makes sure
esp isn't changed arbitrarily.
Before the patch the code would generate:
mov $0xf3,%eax
movl $0xfffff,0x8(%esp)
movl $0x51,0xc(%esp)
xchg %esp,%ebx
int $0x80
xchg %esp,%ebx
Using INTERNAL_SYSCALL instead will generate:
movl $0xfffff,0x8(%esp)
movl $0x51,0xc(%esp)
xchg %ecx,%ebx
mov $0xf3,%eax
int $0x80
xchg %ecx,%ebx
Thanks to Florian Weimer for analysing why the original code generated
the bogus esp usage:
_segdescr.desc happens to be at the top of the stack, so its address
is in %esp. The asm statement says that %3 is an input, so its value
will not change, and GCC can use %esp as the input register for the
expression &_segdescr.desc. But the constraints do not fully describe
the asm statement because the %3 register is actually modified, albeit
only temporarily.
[BZ #17319]
* sysdeps/i386/nptl/tls.h (TLS_INIT_TP): Use INTERNAL_SYSCALL
to call set_thread_area instead of hand written asm.
(__NR_set_thread_area): Removed define.
(TLS_FLAG_WRITABLE): Likewise.
(__ASSUME_SET_THREAD_AREA): Remove check.
(TLS_EBX_ARG): Remove define.
(TLS_LOAD_EBX): Likewise.
* config.h.in (HAVE_AVX2_SUPPORT): New #undef.
* sysdeps/i386/configure.ac: Set HAVE_AVX2_SUPPORT and
config-cflags-avx2.
* sysdeps/x86_64/configure.ac: Likewise.
* sysdeps/i386/configure: Regenerated.
* sysdeps/x86_64/configure: Likewise.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
memset-avx2 only if config-cflags-avx2 is yes.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list):
Tests for memset_chk and memset only if HAVE_AVX2_SUPPORT is
defined.
* sysdeps/x86_64/multiarch/memset.S: Define multiple versions
only if HAVE_AVX2_SUPPORT is defined.
* sysdeps/x86_64/multiarch/memset_chk.S: Likewise.
The definition of SHARED is tested with #ifdef pretty much everywhere
apart from these few places. The tlsdesc.c code seems to be copy and
pasted to a few architectures and there is one instance in the hppa
startup code.
ChangeLog:
2014-07-09 Will Newton <will.newton@linaro.org>
* sysdeps/aarch64/tlsdesc.c (_dl_unmap): Test SHARED with #ifdef.
* sysdeps/arm/tlsdesc.c (_dl_unmap): Likewise.
* sysdeps/i386/tlsdesc.c (_dl_unmap): Likewise.
* sysdeps/x86_64/tlsdesc.c (_dl_unmap): Likewise.
* sysdeps/hppa/start.S (_start): Likewise.
This patch fixes bugs 16561 and 16562, bad results of yn in overflow
cases in non-default rounding modes, both because an intermediate
overflow in the recurrence does not get detected if the result is not
an infinity and because an overflowing result may occur in the wrong
sign. The fix is to set FE_TONEAREST mode internally for the parts of
the function where such overflows can occur (which includes the call
to y1 - where yn is used to compute a Bessel function of order -1,
negating the result of y1 isn't correct for overflowing results in
directed rounding modes) and then compute an overflowing value in the
original rounding mode if the to-nearest result was an infinity.
Tested x86_64 and x86 and ulps updated accordingly. Also tested for
mips64 and powerpc32 to test the ldbl-128 and ldbl-128ibm changes.
(The tests for these bugs were added in my previous y1 patch, so the
only thing this patch has to do with the testsuite is enable yn
testing in all rounding modes.)
[BZ #16561]
[BZ #16562]
* sysdeps/ieee754/dbl-64/e_jn.c: Include <float.h>.
(__ieee754_yn): Set FE_TONEAREST mode internally and then
recompute overflowing results in original rounding mode.
* sysdeps/ieee754/flt-32/e_jnf.c: Include <float.h>.
(__ieee754_ynf): Set FE_TONEAREST mode internally and then
recompute overflowing results in original rounding mode.
* sysdeps/ieee754/ldbl-128/e_jnl.c: Include <float.h>.
(__ieee754_ynl): Set FE_TONEAREST mode internally and then
recompute overflowing results in original rounding mode.
* sysdeps/ieee754/ldbl-128ibm/e_jnl.c: Include <float.h>.
(__ieee754_ynl): Set FE_TONEAREST mode internally and then
recompute overflowing results in original rounding mode.
* sysdeps/ieee754/ldbl-96/e_jnl.c: Include <float.h>.
(__ieee754_ynl): Set FE_TONEAREST mode internally and then
recompute overflowing results in original rounding mode.
* sysdeps/i386/fpu/fenv_private.h [!__SSE2_MATH__]
(libc_feholdsetround_ctx): New macro.
* math/libm-test.inc (yn_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps : Likewise.
This patch moves the USE_REGPARMS define from the toplevel
configure.ac to sysdeps/i386/configure.ac.
Tested x86 that the disassembly of installed shared libraries is
unchanged by this patch.
* configure.ac (USE_REGPARMS): Don't define here.
* configure: Regenerated.
* sysdeps/i386/configure.ac (USE_REGPARMS): Define here.
* sysdeps/i386/configure: Regenerated.
This patch makes non-ex-ports architectures set base_machine and
machine based on the original configured machine value in preconfigure
fragments, like ex-ports architectures, rather than in the toplevel
configure.ac.
Tested x86 that the disassembly of installed shared libraries is
unchanged by the patch.
* configure.ac (base_machine): Do not set specially for particular
machines here.
* configure: Regenerated.
* sysdeps/powerpc/preconfigure: Move machine and base_machine
settings from configure.ac.
* sysdeps/i386/preconfigure: New file.
* sysdeps/s390/preconfigure: Likewise.
* sysdeps/sh/preconfigure: Likewise.
* sysdeps/sparc/preconfigure: Likewise.
This patch fixes bug 16539, spurious underflow exceptions from x86 /
x86-64 expm1l. The problem is that the computation of a base-2
exponent with extra precision involves spurious underflows for
arguments that are small but not subnormal, so a check is added to
just return the argument in those cases. (If the argument *is*
subnormal, underflowing is correct and the existing code will always
underflow, so it suffices to keep using the existing code in that
case; some expm1 implementations have a bug (bug 16353) with missing
underflow exceptions, but I don't think there's such a bug in this
particular version.)
Tested x86_64 and x86; no ulps updates needed.
(auto-libm-test-out diffs omitted below.)
[BZ #16539]
* sysdeps/i386/fpu/e_expl.S (IEEE754_EXPL) [USE_AS_EXPM1L]: Just
return the argument for normal arguments with exponent below -64.
* sysdeps/x86_64/fpu/e_expl.S (IEEE754_EXPL) [USE_AS_EXPM1L]:
Likewise.
* math/auto-libm-test-in: Add another test of expm1.
* math/auto-libm-test-out: Regenerated.
This patch fixes bug 16354, spurious underflows from cosh when a tiny
argument is passed to expm1 and expm1 correctly underflows although
the final result of cosh should be 1. As noted in that bug, some
cases are latent because of expm1 implementations not raising
underflow (bug 16353), but all the implementations are fixed
similarly. They already contained checks for tiny arguments, but the
checks were too late to avoid underflow from expm1 (although they
would avoid underflow from subsequent squaring of the result of
expm1); they are moved before the expm1 calls.
The thresholds used for considering arguments tiny are not
particularly consistent in how they relate to the precision of the
floating-point format in question. They are, however, all sufficient
to ensure that the round-to-nearest result of cosh is indeed 1 below
the threshold (although sometimes they are smaller than necessary).
But the previous logic did not return 1, but the previously computed 1
+ expm1(abs(x)) value. And the thresholds in the ldbl-128 and
ldbl-128ibm code (0x1p-71L - I suspect 0x3f8b was intended in the code
instead of 0x3fb8 - and (roughly) 0x1p-55L) are not sufficient for
that value to be 1. So by moving the test for tiny arguments, and
consequently returning 1 directly now the expm1 value hasn't been
computed by that point, this patch also fixes bug 17061, the (large
number of ulps) inaccuracy for small arguments in those
implementations. Tests for that bug are duly added.
Tested x86_64 and x86 and ulps updated accordingly. Also tested for
mips64 and powerpc32 to validate the ldbl-128 and ldbl-128ibm changes.
[BZ #16354]
[BZ #17061]
* sysdeps/ieee754/dbl-64/e_cosh.c (__ieee754_cosh): Check for
small arguments before calling __expm1.
* sysdeps/ieee754/flt-32/e_coshf.c (__ieee754_coshf): Check for
small arguments before calling __expm1f.
* sysdeps/ieee754/ldbl-128/e_coshl.c (__ieee754_coshl): Check for
small arguments before calling __expm1l.
* sysdeps/ieee754/ldbl-128ibm/e_coshl.c (__ieee754_coshl):
Likewise.
* sysdeps/ieee754/ldbl-96/e_coshl.c (__ieee754_coshl): Likewise.
* math/auto-libm-test-in: Add more cosh tests. Do not allow
spurious underflow for some cosh tests.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
This patch enables testing of cpow in all rounding modes using
ALL_RM_TEST. There were two reasons this was previously deferred:
* MPC has complicated rounding-mode-dependent rules for the signs of
exact zero real or imaginary parts in the result of mpc_pow. Annex
G does not impose any such requirements and I don't think glibc
should try to implement any particular logic here. This patch adds
support for gen-auto-libm-tests passing the IGNORE_ZERO_INF_SIGN
flag to libm-test.inc.
* Error accumulations in some tests in non-default rounding modes
exceed the maximum error permitted in libm-test.inc. This patch
marks the problem tests with xfail-rounding. (It might be possible
to reduce the accumulations a bit by using round-to-nearest when
cpow calls clog, but I don't think there's much point; the
implementation approach for cpow is fundamentally deficient, as
discussed in the existing bug for cpow inaccuracy which can
reasonably be considered to cover these less-inaccurate cases as
well. It's possible that the test "cpow 2 0 10 0" will also need
xfail-rounding on some platforms.)
Tested x86_64 and x86 and ulps updated accordingly.
* math/gen-auto-libm-tests.c: Document use of
ignore-zero-inf-sign.
(input_flag_type): Add value flag_ignore_zero_inf_sign.
(input_flags): Add ignore-zero-inf-sign.
(output_for_one_input_case): Handle flag_ignore_zero_inf_sign.
* math/gen-libm-test.pl (generate_testfile): Handle
ignore-zero-inf-sign.
* math/auto-libm-test-in: Mark some cpow tests with
ignore-zero-inf-sign and some with xfail-rounding.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (cpow_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch fixes bug 16315, bad pow handling of overflow/underflow in
non-default rounding modes. Tests of pow are duly converted to
ALL_RM_TEST to run all tests in all rounding modes.
There are two main issues here. First, various implementations
compute a negative result by negating a positive result, but this
yields inappropriate overflow / underflow values for directed
rounding, so either overflow / underflow results need recomputing in
the correct sign, or the relevant overflowing / underflowing operation
needs to be made to have a result of the correct sign. Second, the
dbl-64 implementation sets FE_TONEAREST internally; in the overflow /
underflow case, the result needs recomputing in the original rounding
mode.
Tested x86_64 and x86 and ulps updated accordingly.
[BZ #16315]
* sysdeps/i386/fpu/e_pow.S (__ieee754_pow): Ensure possibly
overflowing or underflowing operations take place with sign of
result.
* sysdeps/i386/fpu/e_powf.S (__ieee754_powf): Likewise.
* sysdeps/i386/fpu/e_powl.S (__ieee754_powl): Likewise.
* sysdeps/ieee754/dbl-64/e_pow.c: Include <math.h>.
(__ieee754_pow): Recompute overflowing and underflowing results in
original rounding mode.
* sysdeps/x86/fpu/powl_helper.c: Include <stdbool.h>.
(__powl_helper): Allow negative argument X and scale negated value
as needed. Avoid passing value outside [-1, 1] to f2xm1.
* sysdeps/x86_64/fpu/e_powl.S (__ieee754_powl): Ensure possibly
overflowing or underflowing operations take place with sign of
result.
* sysdeps/x86_64/fpu/multiarch/e_pow.c [HAVE_FMA4_SUPPORT]:
Include <math.h>.
* math/auto-libm-test-in: Add more tests of pow.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (pow_test): Use ALL_RM_TEST.
(pow_tonearest_test_data): Remove.
(pow_test_tonearest): Likewise.
(pow_towardzero_test_data): Likewise.
(pow_test_towardzero): Likewise.
(pow_downward_test_data): Likewise.
(pow_test_downward): Likewise.
(pow_upward_test_data): Likewise.
(pow_test_upward): Likewise.
(main): Don't call removed functions.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch makes files using __ASSUME_* macros include
<kernel-features.h> explicitly, rather than relying on some other
header (such as tls.h, lowlevellock.h or pthreadP.h) to include it
implicitly. (I omitted cases where I've already posted or am testing
the patch that stops the file from needing __ASSUME_* at all.) This
accords with the general principle of making source files include the
headers for anything they use, and also helps make it safe to remove
<kernel-features.h> includes from any file that doesn't use
__ASSUME_* (some of those may be stray includes left behind after
increasing the minimum kernel version, others may never have been
needed or may have become obsolete after some other change).
Tested x86_64 that the disassembly of installed shared libraries is
unchanged by this patch.
* nptl/pthread_cond_wait.c: Include <kernel-features.h>.
* nptl/pthread_rwlock_timedrdlock.c: Likewise.
* nptl/pthread_rwlock_timedwrlock.c: Likewise.
* nptl/sysdeps/unix/sysv/linux/lowlevelrobustlock.c: Likewise.
* nscd/nscd.c: Likewise.
* sysdeps/i386/nptl/tcb-offsets.sym: Likewise.
* sysdeps/powerpc/nptl/tcb-offsets.sym: Likewise.
* sysdeps/sh/nptl/tcb-offsets.sym: Likewise.
* sysdeps/x86_64/nptl/tcb-offsets.sym: Likewise.
Errno is not set and the testcases will fail.
Now the scalbln-aliases are removed in i386/m68
and the wrappers are used when calling the scalbln-functions.
On ia64 only scalblnf has its own implementation.
For scalbln and scalblnl the ieee754/dbl-64 and ieee754/ldbl-96 are used, thus
the wrappers are needed, too.
This patch fixes __ieee754_logl (-LDBL_MAX) on x86_64 and x86 not to
subtract 1 from its argument and so cause spurious overflow in
FE_DOWNWARD mode. (For any argument strictly less than -1, it doesn't
matter whether or not 1 is subtracted before computing log1p, as long
as the result doesn't overflow to -Inf.)
Tested x86_64 and x86. (This particular case lacks test coverage,
since the testsuite doesn't cover -lieee, but it will be covered by
tests after the following patch to test pow in all rounding modes,
which was the context in which this bug was found.)
[BZ #17022]
* sysdeps/i386/fpu/e_logl.S (__ieee754_logl): Do not subtract 1
from arguments -2 or below.
* sysdeps/i386/i686/fpu/e_logl.S (__ieee754_logl): Likewise.
* sysdeps/x86_64/fpu/e_logl.S (__ieee754_logl): Likewise.
As with other issues of this kind, bug 17042 is log2 (1) wrongly
returning -0 instead of +0 in round-downward mode because of
implementations effectively in terms of log1p (x - 1). This patch
fixes the issue in the same way used for log and log10.
Tested x86_64 and x86 and ulps updated accordingly. Also tested for
mips64 to confirm a fix was needed for ldbl-128 and to validate that
fix (also applied to ldbl-128ibm since that version of log2l is
essentially the same as the ldbl-128 one).
[BZ #17042]
* sysdeps/i386/fpu/e_log2.S (__ieee754_log2): Take absolete value
when x - 1 is zero.
* sysdeps/i386/fpu/e_log2f.S (__ieee754_log2f): Likewise.
* sysdeps/i386/fpu/e_log2l.S (__ieee754_log2l): Likewise.
* sysdeps/ieee754/ldbl-128/e_log2l.c (__ieee754_log2l): Return
0.0L for an argument of 1.0L.
* sysdeps/ieee754/ldbl-128ibm/e_log2l.c (__ieee754_log2l):
Likewise.
* sysdeps/x86_64/fpu/e_log2l.S (__ieee754_log2l): Take absolute
value when x - 1 is zero.
* math/libm-test.inc (log2_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
As with various other issues of this kind, bug 16977 is log10 (1)
wrongly returning -0 rather than +0 in round-downward mode because of
an implementation effectively in terms of log1p (x - 1). This patch
fixes the issue in the same way used for log.
Tested x86_64 and x86 and ulps updated accordingly. Also tested for
mips64 to confirm a fix was needed for ldbl-128 and to validate that
fix (also applied to ldbl-128ibm since that version of logl is
essentially the same as the ldbl-128 one).
[BZ #16977]
* sysdeps/i386/fpu/e_log10.S (__ieee754_log10): Take absolute
value when x - 1 is zero.
* sysdeps/i386/fpu/e_log10f.S (__ieee754_log10f): Likewise.
* sysdeps/i386/fpu/e_log10l.S (__ieee754_log10l): Likewise.
* sysdeps/ieee754/ldbl-128/e_log10l.c (__ieee754_log10l): Return
0.0L for an argument of 1.0L.
* sysdeps/ieee754/ldbl-128ibm/e_log10l.c (__ieee754_log10l):
Likewise.
* sysdeps/x86_64/fpu/e_log10l.S (__ieee754_log10l): Take absolute
value when x - 1 is zero.
* math/libm-test.inc (log10_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
Bug 16564 is spurious overflow of log1pl (LDBL_MAX) in FE_UPWARD mode,
resulting from log1pl adding 1 to its argument (for arguments not
close to 0), which overflows in that mode. This patch fixes this by
avoiding adding 1 to large arguments (precisely what counts as large
depends on the floating-point format).
Tested x86_64 and x86, and spot-checked log1pl tests on mips64 and
powerpc64.
[BZ #16564]
* sysdeps/i386/fpu/s_log1pl.S (__log1pl): Do not add 1 to positive
arguments with exponent 65 or above.
* sysdeps/ieee754/ldbl-128/s_log1pl.c (__log1pl): Do not add 1 to
arguments 0x1p113L or above.
* sysdeps/ieee754/ldbl-128ibm/s_log1pl.c (__log1pl): Do not add 1
to arguments 0x1p107L or above.
* sysdeps/x86_64/fpu/s_log1pl.S (__log1pl): Do not add 1 to
positive arguments with exponent 65 or above.
* math/auto-libm-test-in: Add more tests of log1p.
* math/auto-libm-test-out: Regenerated.
According to C99/C11 Annex G, cacos applied to a value with real part
+Inf and finite imaginary part should produce a result with real part
+0. glibc wrongly produces a result with real part -0 in FE_DOWNWARD
mode. This patch fixes this by checking for zero results in the
relevant case of non-finite arguments (where there should never be a
result with -0 real part), and converts the tests of cacos to
ALL_RM_TEST.
Tested x86_64 and x86 and ulps updated accordingly.
[BZ #16928]
* math/s_cacos.c (__cacos): Ensure zero real part of result from
non-finite arguments is +0.
* math/s_cacosf.c (__cacosf): Likewise.
* math/s_cacosl.c (__cacosl): Likewise.
* math/libm-test.inc (cacos_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
According to C99 and C11 Annex F, acosh (1) should be +0 in all
rounding modes. However, some implementations in glibc wrongly return
-0 in round-downward mode (which is what you get if you end up
computing log1p (-0), via 1 - 1 being -0 in round-downward mode).
This patch fixes the problem implementations, by correcting the test
for an exact 1 value in the ldbl-96 implementation to allow for the
explicit high bit of the mantissa, and by inserting fabs instructions
in the i386 implementations; tests of acosh are duly converted to
ALL_RM_TEST. I believe all the other sysdeps/ieee754 implementations
are already OK (I haven't checked the ia64 versions, but if buggy then
that will be obvious from the results of test runs after this patch is
in).
Tested x86_64 and x86 and ulps updated accordingly.
[BZ #16927]
* sysdeps/i386/fpu/e_acosh.S (__ieee754_acosh): Use fabs on x-1
value.
* sysdeps/i386/fpu/e_acoshf.S (__ieee754_acoshf): Likewise.
* sysdeps/i386/fpu/e_acoshl.S (__ieee754_acoshl): Likewise.
* sysdeps/ieee754/ldbl-96/e_acoshl.c (__ieee754_acoshl): Correct
for explicit high bit of mantissa when testing for argument equal
to 1.
* math/libm-test.inc (acosh_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch fixes bug 16064, i386 fenv_t not including SSE state, using
the technique suggested there of storing the state in the existing
__eip field of fenv_t to avoid needing to increase the size of fenv_t
and add new symbol versions. The included testcase, which previously
failed for i386 (but passed for x86_64), illustrates how the previous
state was buggy.
This patch causes the SSE state to be included *to the extent it is on
x86_64*. Where some state should logically be included but isn't for
x86_64 (see bug 16068), this patch does not cause it to be included
for i386 either. The idea is that any patch fixing that bug should
fix it for both x86_64 and i386 at once.
Tested i386 and x86_64. (I haven't tested the case of a CPU without
SSE2 disabling the test.)
[BZ #16064]
* sysdeps/i386/fpu/fegetenv.c: Include <unistd.h>, <ldsodefs.h>
and <dl-procinfo.h>.
(__fegetenv): Save SSE state in envp->__eip if supported.
* sysdeps/i386/fpu/feholdexcpt.c (feholdexcept): Save SSE state in
envp->__eip if supported.
* sysdeps/i386/fpu/fesetenv.c: Include <unistd.h>, <ldsodefs.h>
and <dl-procinfo.h>.
(__fesetenv): Always set __eip, __cs_selector, __opcode,
__data_offset and __data_selector in environment to 0. Set SSE
state if supported.
* sysdeps/x86/fpu/Makefile [$(subdir) = math] (tests): Add
test-fenv-sse.
[$(subdir) = math] (CFLAGS-test-fenv-sse.c): Add -msse2
-mfpmath=sse.
* sysdeps/x86/fpu/test-fenv-sse.c: New file.
This patch fixes incorrect results from catan and catanh of certain
special inputs in round-downward mode (bug 16799), and incorrect
results of __ieee754_logf (+/-0) in round-downward mode (bug 16800)
that show up through catan/catanh when tested in all rounding modes,
but not directly in the testing for logf because the bug gets hidden
by the wrappers.
Both bugs involve a zero that should be +0 being -0 instead: one
computed as (1-x)*(1+x) in the catan/catanh case, and one as (x-x) in
the logf case. The fixes ensure positive zero is used. Testing of
catan and catanh in all rounding modes is duly enabled.
I expect there are various other bugs in special cases in __ieee754_*
functions that are normally hidden by the wrappers but would show up
for testing with -lieee (or in future with -fno-math-errno if we
replace -lieee and _LIB_VERSION with compile-time redirection to new
*_noerrno symbol names).
Tested x86_64 and x86 and ulps updated accordingly.
[BZ #16799]
[BZ #16800]
* math/s_catan.c (__catan): Avoid passing -0 denominator to atan2
with 0 numerator.
* math/s_catanf.c (__catanf): Likewise.
* math/s_catanh.c (__catanh): Likewise.
* math/s_catanhf.c (__catanhf): Likewise.
* math/s_catanhl.c (__catanhl): Likewise.
* math/s_catanl.c (__catanl): Likewise.
* sysdeps/ieee754/flt-32/e_logf.c (__ieee754_logf): Always divide
by positive zero when computing -Inf result.
* math/libm-test.inc (catan_test): Use ALL_RM_TEST.
(catanh_test): Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch fixes bug 16789, incorrect sign of (real part) zero result
from clog and clog10 in round-downward mode, arising from that real
part being computed as 0 - 0. To ensure that an underflow exception
occurred, the code used an underflowing value (the next term in the
series for log1p) in arithmetic computing the real part of the result,
yielding the problematic 0 - 0 computation in some cases even when the
mathematical result would be small but positive. The patch changes
this code to use the math_force_eval approach to ensuring that an
underflowing computation actually occurs. Tests of clog and clog10
are enabled in all rounding modes.
Tested x86_64 and x86 and ulps updated accordingly.
[BZ #16789]
* math/s_clog.c (__clog): Use math_force_eval to ensure underflow
instead of using underflowing value in computing result.
* math/s_clog10.c (__clog10): Likewise.
* math/s_clog10f.c (__clog10f): Likewise.
* math/s_clog10l.c (__clog10l): Likewise.
* math/s_clogf.c (__clogf): Likewise.
* math/s_clogl.c (__clogl): Likewise.
* math/libm-test.inc (clog_test): Use ALL_RM_TEST.
(clog10_test): Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch fixes bug 16348, spurious underflows from x86/x86_64 expl
on arguments close to 0. These implementations effectively use expm1
(on the fractional part of the argument) internally, so resulting in
spurious underflows when the result is very close to 1. For arguments
small enough that the round-to-nearest correct result is 1, this patch
uses 1+x instead.
These implementations are also used for exp10l and so the patch fixes
similar issues there (the 0x1p-67 threshold being small enough to be
correct for exp10l as well as expl). But because of spurious
underflows in other exp10 implementations (bug 16560), the tests
aren't added for exp10 at this point - they can be added when the
other exp10 parts of that bug are fixed.
Tested x86_64 and x86; no ulps updates needed.
[BZ #16348]
* sysdeps/i386/fpu/e_expl.S (IEEE754_EXPL) [!USE_AS_EXPM1L]: Use
1+x for argument with exponent below -67.
* sysdeps/x86_64/fpu/e_expl.S (IEEE754_EXPL) [!USE_AS_EXPM1L]:
Likewise.
* math/auto-libm-test-in: Add more tests of exp.
* math/auto-libm-test-out: Regenerated.
gen-auto-libm-tests presently allows but does not require underflow
exceptions for results with magnitude in the range (greatest
subnormal, least normal].
In some cases, the magnitude of the exact result is very slightly
above the least normal, but rounding in the implementation results in
it effectively computing an infinite-precision result that is slightly
below the least normal, so raising an underflow exception. This is in
accordance with the documented accuracy goals, but results in
testsuite failures.
This patch changes the logic to allow underflows when the mathematical
result is up to 0.5ulp above the least normal (so in any case where
the round-to-nearest result is the least normal). Ideally underflows
in all these cases would be accepted only when an underflow with the
actual result is consistent with the rounding mode (in FE_TOWARDZERO
mode, a return value of the least normal implies that the
infinite-precision result did not underflow so there should be no
underflow exception, for example), so as to match the documented goals
more precisely - whereas at present the tests for exceptions are
completely independent of the tests of the returned values. (The same
applies to overflow exceptions as well - they too should be checked
for consistency with the result, as in FE_TOWARDZERO mode a result
1ulp below the largest finite value should be inconsistent with an
overflow exception and cause a failure with overflow rather than
simply being considered a 1ulp error when overflow is expected.) But
the present patch at least deals with the cases causing spurious
failures so that (a) certain existing tests no longer need to be
marked as having spurious exceptions (such markings in
auto-libm-test-in end up applying to more cases than just those they
are needed for) and (b) log1p can be tested in all rounding modes
without introducing more such failures. This patch duly moves tests
of log1p to ALL_RM_TEST.
Tested x86_64 and x86 and ulps updated accordingly.
[BZ #16357]
[BZ #16599]
* math/gen-auto-libm-tests.c (fp_format_desc): Add field
min_plus_half.
(fp_formats): Update initializers.
(init_fp_formats): Initialize new field.
(output_for_one_input_case): Allow underflow for results up to
min_plus_half.
* math/libm-test.inc (log1p_test): Use ALL_RM_TEST.
* math/auto-libm-test-in: Don't mark some underflows from asin and
atanh as spurious.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
The dbl-64 version of exp needs round-to-nearest mode for its internal
computations, but that has the consequence of inappropriate
overflowing and underflowing results in other rounding modes. This
patch fixes this by recomputing the relevant results in cases where
the round-to-nearest result overflows to infinity or underflows to
zero (most of the diffs are actually just consequent reindentation).
Tests are enabled in all rounding modes for complex functions using
exp - but not for cexp because it turns out there are bugs causing
spurious underflows for cexp for some tests, which will need to be
fixed separately (I suspect ccos ccosh csin csinh ctan ctanh have
similar bugs, just not shown by the present set of test inputs).
Tested x86_64 and x86 and ulps updated accordingly.
[BZ #16284]
* sysdeps/ieee754/dbl-64/e_exp.c (__ieee754_exp): Use original
rounding mode to recompute results that overflow to infinity or
underflow to zero.
* math/auto-libm-test-in: Don't mark tests as expected to fail for
bug 16284.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (ccos_test): Use ALL_RM_TEST.
(ccosh_test): Likewise.
(csin_test_data): Use plus_oflow.
(csin_test): Use ALL_RM_TEST.
(csinh_test_data): Use plus_oflow.
(csinh_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
According to ISO C Annex F, log (1) should be +0 in all rounding
modes, but some implementations in glibc wrongly return -0 in
round-downward mode (mapping to log1p (x - 1) is problematic because 1
- 1 is -0 in round-downward mode, and log1p (-0) is -0). This patch
fixes this. (It helps with some implementations of other functions
such as acosh, log2 and log10 that call out to log, but not enough to
enable all-rounding-modes testing for those functions without further
fixes to other implementations of them.)
Tested x86_64 and x86 and ulps updated accordingly, and did spot tests
for mips64 for the ldbl-128 fix, and i586 for the sysdeps/i386/fpu
implementations shadowed by those in sysdeps/i386/i686/fpu.
[BZ #16731]
* sysdeps/i386/fpu/e_log.S (__ieee754_log): Take absolute value
when x - 1 is zero.
* sysdeps/i386/fpu/e_logf.S (__ieee754_logf): Likewise.
* sysdeps/i386/fpu/e_logl.S (__ieee754_logl): Likewise.
* sysdeps/i386/i686/fpu/e_logl.S (__ieee754_logl): Likewise.
* sysdeps/ieee754/dbl-64/e_log.c (__ieee754_log): Return +0 when
argument is 1.
* sysdeps/ieee754/ldbl-128/e_logl.c (__ieee754_logl): Likewise.
* sysdeps/x86_64/fpu/e_logl.S: Take absolute value when x - 1 is
zero.
* math/libm-test.inc (log_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch makes libm-test.inc tests of most functions use ALL_RM_TEST
unless there was some reason to defer that change for a particular
function.
I started out planning to defer the change for pow (bug 16315), cexp /
ccos / ccosh / csin / csinh (likely fallout from exp, bug 16284) and
cpow (exact expectations for signs of exact zero results not wanted).
Testing on x86_64 and x86 showed additional failures for acosh, cacos,
catan, catanh, clog, clog10, jn, log, log10, log1p, log2, tgamma, yn,
so making the change for those functions was deferred as well, pending
investigation to show which of these represent distinct bugs (some
such bugs may already be filed) and appropriate fixing / XFAILing.
Failures include wrong signs of zero results, errors slightly above
the 9ulp bound (in such cases it may make sense for functions to set
round-to-nearest internally to reduce error accumulation), large
errors and incorrect overflow/underflow for the rounding mode (with
consequent missing errno settings in some cases). It's possible some
could be issues with test expectations, though I didn't notice any
that were obviously like that (I added NO_TEST_INLINE for cases that
were failing for ildoubl on x86 and where it seemed reasonable for
them to fail for the fast-math inlines).
There may of course be failures on other architectures for functions
that didn't fail on x86_64 or x86, in which case the usual rule
applies: file a bug (preferably identifying the underlying problem
function, in cases where function A calls function B and a problem
with function B may present in the test results for function A) if not
already in Bugzilla then fix or XFAIL.
Tested x86_64 and x86 and ulps updated accordingly.
* math/libm-test.inc (asinh_test): Use ALL_RM_TEST.
(atan_test): Likewise.
(atanh_test_data): Use NO_TEST_INLINE for two tests.
(atanh_test): Use ALL_RM_TEST.
(atan2_test_data): Likewise.
(cabs_test): Likewise.
(cacosh_test): Likewise.
(carg_test): Likewise.
(casin_test): Likewise.
(casinh_test): Likewise.
(cbrt_test): Likewise.
(csqrt_test): Likewise.
(erf_test): Likewise.
(erfc_test): Likewise.
(pow10_test): Likewise.
(exp2_test): Likewise.
(hypot_test): Likewise.
(j0_test): Likewise.
(j1_test): Likewise.
(lgamma_test): Likewise.
(gamma_test): Likewise.
(sincos_test): Likewise.
(tanh_test): Likewise.
(y0_test): Likewise.
(y1_test): Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
ISO C requires the result of nextafter to be independent of the
rounding mode, even when underflow or overflow occurs. This patch
fixes the bug in various nextafter implementations that, having done
an overflowing computation to force an overflow exception (correct),
they then return the result of that computation rather than an
infinity computed some other way (incorrect, when the overflowing
result of arithmetic with that sign and rounding mode is finite but
the correct result is infinite) - generally by falling through to
existing code to return a value that in fact is correct for this case
(but was computed by an integer increment and so without generating
the exceptions required). Having fixed the bug, the previously
deferred conversion of nextafter testing in libm-test.inc to
ALL_RM_TEST is also included.
Tested x86_64 and x86; also spot-checked results of nextafter tests
for powerpc32 and mips64 to test the ldbl-128ibm and ldbl-128
changes. (The m68k change is untested.)
[BZ #16677]
* math/s_nextafter.c (__nextafter): Do not return value from
overflowing computation.
* sysdeps/i386/fpu/s_nextafterl.c (__nextafterl): Likewise.
* sysdeps/ieee754/flt-32/s_nextafterf.c (__nextafterf): Likewise.
* sysdeps/ieee754/ldbl-128/s_nextafterl.c (__nextafterl):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c (__nextafterl):
Likewise.
* sysdeps/m68k/m680x0/fpu/s_nextafterl.c (__nextafterl): Likewise.
* math/libm-test.inc (nextafter_test): Use ALL_RM_TEST.
As recently discussed
<https://sourceware.org/ml/libc-alpha/2014-02/msg00670.html>, it
doesn't seem particularly useful for libm-test-ulps files to contain
huge amounts of data on ulps for individual tests; just the global
maximum observed ulps for each function, together with the
verification of exceptions, errno and special results such as
infinities and NaNs for each test, suffices to verify that a
function's behavior on the given test inputs is within the expected
accuracy. Removing this data reduces source tree churn caused by
updates to these files when libm tests are added, and reduces the
frequency with which testsuite additions actually need libm-test-ulps
changes at all.
Accordingly, this patch removes that data, so that individual tests
get checked against the global bounds for the given function and only
generate an error if those are exceeded. Tested x86_64 (including
verifying that if an ulps value is artificially reduced, the tests do
indeed fail as they should and "make regen-ulps" generates the
expected changes).
* math/libm-test.inc (struct ulp_data): Don't refer to ulps for
individual tests in comment.
(libm-test-ulps.h): Don't refer to test_ulps in #include comment.
(prev_max_error): New variable.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(compare_ulp_data): Don't refer to test names in comment.
(find_test_ulps): Remove function.
(find_function_ulps): Likewise.
(find_complex_function_ulps): Likewise.
(init_max_error): Take function name as argument. Look up ulps
for that function.
(print_ulps): Remove function.
(print_max_error): Use prev_max_error instead of calling
find_function_ulps.
(print_complex_max_error): Use prev_real_max_error and
prev_imag_max_error instead of calling find_complex_function_ulps.
(check_float_internal): Take max_ulp parameter instead of calling
find_test_ulps. Don't call print_ulps.
(check_float): Update call to check_float_internal.
(check_complex): Update calls to check_float_internal.
(START): Pass argument to init_max_error.
* math/gen-libm-test.pl (%results): Don't include "kind"
information.
(parse_ulps): Don't handle ulps of individual tests.
(print_ulps_file): Likewise.
(output_ulps): Likewise.
* math/README.libm-test: Update.
* manual/libm-err-tab.pl (parse_ulps): Don't handle ulps of
individual tests.
* sysdeps/aarch64/libm-test-ulps: Remove individual test ulps.
* sysdeps/alpha/fpu/libm-test-ulps: Likewise.
* sysdeps/arm/libm-test-ulps: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/ia64/fpu/libm-test-ulps: Likewise.
* sysdeps/m68k/coldfire/fpu/libm-test-ulps: Likewise.
* sysdeps/m68k/m680x0/fpu/libm-test-ulps: Likewise.
* sysdeps/microblaze/libm-test-ulps: Likewise.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
* sysdeps/s390/fpu/libm-test-ulps: Likewise.
* sysdeps/sh/libm-test-ulps: Likewise.
* sysdeps/sparc/fpu/libm-test-ulps: Likewise.
* sysdeps/tile/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* sysdeps/hppa/fpu/libm-test-ulps: Remove individual test ulps.
This patch moves tests of clog10 to auto-libm-test-in. Note that this
means gen-auto-libm-tests will now depend on the recent MPC 1.0.2
release which added a fix for a bug that made gen-auto-libm-tests hang
for clog10. (It still can't conveniently be used for cacos cacosh
casin casinh catan catanh csin csinh because of extreme slowness of
those functions for special cases in MPC; at least some slow cases of
csin / csinh are fixed in MPC trunk, but not in a release.)
Tested x86_64 and x86 and ulps updated accordingly.
* math/auto-libm-test-in: Add tests of clog10.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (clog10_test_data): Use AUTO_TESTS_c_c.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
gen-auto-libm-tests has a bug in the logic for setting a sticky bit
based on the ternary value from MPFR: it is correct for positive
results, but for negative results mpz_setbit acts as if a two's
complement representation is used, whereas the low bit needs setting
based on the sign-magnitude representation GMP actually uses. (This
showed up in converting fma tests to use auto-libm-test-in /
gen-auto-libm-tests.)
This patch fixes the problem by negating the mpz_t value to set its
low bit. There are lots of changes to auto-libm-test-out (mainly 1ulp
fixes to ldbl-128 expected results), but only a few ulps updates are
needed on x86 / x86_64. In one case, a corrected expectation showed
up a spurious underflow exception where the correct result is slightly
outside the underflowing range.
Tested x86_64 and x86 and ulps updated accordingly.
* math/gen-auto-libm-tests.c (adjust_real): Ensure integers are
non-negative before setting low bit.
* math/auto-libm-test-in: Mark one asin test possibly having
spurious underflow.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
