Power ISA 2.07B section B.5.5 relaxed the barrier requirement around a
TLE enabled lock. It is now identical to a traditional lock.
2015-08-26 Paul E. Murphy <murphyp@linux.vnet.ibm.com>
* sysdeps/unix/sysv/linux/powerpc/elision-lock.c
(__arch_compare_and_exchange_val_32_acq): Remove and use common
definition. ISA 2.07B no longer requires full sync.
Explicit system calls for the socket operations were added in Linux kernel
in commit 86250b9d12ca for powerpc. This patch make use of those instead of
calling socketcall to save number of cycles on networking syscalls.
2015-08-25 Rajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com>
* sysdeps/unix/sysv/linux/powerpc/kernel-features.h: Define new macros.
* sysdeps/unix/sysv/linux/accept.c: Call direct system call.
* sysdeps/unix/sysv/linux/bind.c: Call direct system call.
* sysdeps/unix/sysv/linux/connect.c: Call direct system call.
* sysdeps/unix/sysv/linux/getpeername.c: Call direct system call.
* sysdeps/unix/sysv/linux/getsockname.c: Call direct system call.
* sysdeps/unix/sysv/linux/getsockopt.c: Call direct system call.
* sysdeps/unix/sysv/linux/listen.c: Call direct system call.
* sysdeps/unix/sysv/linux/recv.c: Call direct system call.
* sysdeps/unix/sysv/linux/recvfrom.c: Call direct system call.
* sysdeps/unix/sysv/linux/recvmsg.c: Call direct system call.
* sysdeps/unix/sysv/linux/send.c: Call direct system call.
* sysdeps/unix/sysv/linux/sendmsg.c: Call direct system call.
* sysdeps/unix/sysv/linux/sendto.c: Call direct system call.
* sysdeps/unix/sysv/linux/setsockopt.c: Call direct system call.
* sysdeps/unix/sysv/linux/shutdown.c: Call direct system call.
* sysdeps/unix/sysv/linux/socket.c: Call direct system call.
* sysdeps/unix/sysv/linux/socketpair.c: Call direct system call.
Fix usage of tabort in generated syscalls. r0 has special meaning
when used with this instruction, thus it will not generate
persistent errors, nor return an error code. This mitigates poor
CPU usage when performing elided critical sections.
Additionally, transactions should be aborted when entering a user
invoked syscall. Otherwise the results of the transaction may be
undefined.
2015-08-25 Paul E. Murphy <murphyp@linux.vnet.ibm.com>
* sysdeps/powerpc/powerpc32/sysdep.h (ABORT_TRANSACTION): Use
register other than r0 for tabort, it has special meaning.
* sysdeps/powerpc/powerpc64/sysdep.h (ABORT_TRANSACTION): Likewise
* sysdeps/unix.sysv/linux/powerpc/syscall.S (syscall): Abort
transaction before starting syscall.
PowerPC has always used __IPC_64 like most other architectures, which
means that __ASSUME_IPC64 can be always true. Also, all other
architecture implementations that use the ipc syscall are effectively
identical to the generic version and can be removed.
This patch added a new fmemopen version, for glibc 2.22, that aims to be
POSIX complaint. It fixes some long-stading glibc fmemopen issues, such
as:
* it changes the way fseek with SEEK_END works on fmemopen to seek
relative to buffer size instead of first '\0'. This is default mode and
'b' opening mode does not change internal behavior (bz#6544).
* fix apending opening mode to use as start position either first null
byte of len specified in function call (bz#13152 and #13151).
* remove binary option 'b' and internal different handling (bz#12836)
* fix seek/SEE_END with negative values (bz#14292).
A compatibility symbol is provided to with old behavior for older symbols
version (2.2.5).
* include/stdio.h (fmemopen): Remove hidden prototype.
(__fmemopen): Add new hidden prototype.
* libio/Makefile: Add oldfmemopen object.
* libio/Versions [GLIBC_2.22]: Add new fmemopen symbol.
* libio/fmemopen.c (__fmemopen): Function rewrite to be POSIX
compliance.
* libio/oldfmemopen.c: New file: old fmemopen implementation for
symbol compatibility.
* stdio-common/Makefile [tests]: Add new tst-fmemopen3.
* stdio-common/psiginfo.c [psiginfo]: Call __fmemopen instead of
fmemopen.
* stdio-common/tst-fmemopen3.c: New file: more fmemopen tests, focus
on append and read mode.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist [GLIBC_2.22]: Add
fmemopen.
* sysdeps/unix/sysv/linux/alpha/libc.abilist [GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/arm/libc.abilist [GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist [GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist [GLIBC_2.22]:
Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist [GLIBC_2.22]:
Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist [GLIBC_2.22]:
Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist [GLIBC_2.22]:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist [GLIBC_2.22]:
Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist [GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist [GLIBC_2.22]:
Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist [GLIBC_2.22]:
Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist [GLIBC_2.22]:
Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist [GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist [GLIBC_2.22]: Likewise.
This patch consolidates the sched_getcpu implementations across all
arches (except tile, which requires its own). This patch removes
the powerpc, x86_64 and x32 specific files and change the default
linux one to use INLINE_VSYSCALL where possible (for ports that
implements it).
This patch uses inline calls (through INLINE_SYSCALL macro) to define
the non-cancellable functions macros to avoid use of the
syscall_nocancel entrypoint.
The attached patch fixes a glibc build failure with gcc 5 on powerpc64le
caused by a recent change in gcc where the compiler defines the
_ARCH_PWR6 macro when processing assembly files but doesn't invoke the
assembler in the corresponding machine mode (unless it has been
explicitly configured to target POWER 6 or later). A bug had been filed
with gcc for this (65341) but was closed as won't fix. Glibc relies on
the _ARCH_PWR6 macro in a few .S files to make use of Power ISA 2.5
instructions (specifically, the four-argument form of the mtfsf insn).
A similar problem had occurred in the past (bug 10118) but the fix that
was committed for it didn't anticipate this new problem.
This patch removes the architecture specific gettimeofday implementation
to use the vDSO symbol and consolidate it on a common Linux one.
Similar to clock_gettime and clock_getres vDSO implementation, each port
that supports gettimeofday through vDSO should just implement INLINE_VSYSCALL
to access the symbol and define HAVE_{GETTIME,GETRES}_VSYSCAL as 1.
This patch consolidate the Linux vDSO define and usage across all ports
that uses it. The common vDSO definitions and calling through
{INLINE/INTERNAL}_VSYSCALL macros are moved to a common header
sysdep-vdso.h and vDSO name declaration and prototype is defined
using a common macro.
Also PTR_{MANGLE,DEMANGLE} is added to ports that does not use them
for vDSO calls (aarch64, powerpc, s390, and tile) and thus it will
reflect in code changes. For ports that already implement pointer
mangling/demangling in vDSO system (i386, x32, x86_64) this patch
is mainly a code refactor.
Checked on x32, x86_64, x32, ppc64le, and aarch64.
This patch removes the socket.S implementation for all ports and replace
it by a C implementation using socketcall. For ports that implement
the syscall directly, there is no change.
The patch idea is to simplify the socket function implementation that
uses the socketcall to be based on C implemetation instead of a pseudo
assembly implementation with arch specific parts. The patch then remove
the assembly implementatation for the ports which uses socketcall
(i386, microblaze, mips, powerpc, sparc, m68k, s390 and sh).
I have cross-build GLIBC for afore-mentioned ports and tested on both
i386 and ppc32 without regressions.
This patch is glibc support for a PowerPC TLS optimization, inspired
by Alexandre Oliva's TLS optimization for other processors,
http://www.lsd.ic.unicamp.br/~oliva/writeups/TLS/RFC-TLSDESC-x86.txt
In essence, this optimization uses a zero module id in the tls_index
GOT entry to indicate that a TLS variable is allocated space in the
static TLS area. A special plt call linker stub for __tls_get_addr
checks for such a tls_index and if found, returns the offset
immediately. The linker communicates the fact that the special
__tls_get_addr stub is used by setting a bit in the dynamic tag
DT_PPC64_OPT/DT_PPC_OPT. glibc communicates to the linker that this
optimization is available by the presence of __tls_get_addr_opt.
tst-tlsmod2.so is built with -Wl,--no-tls-get-addr-optimize for
tst-tls-dlinfo, which otherwise would fail since it tests that no
static tls is allocated. The ld option --no-tls-get-addr-optimize has
been available since binutils-2.20 so doesn't need a configure test.
* NEWS: Advertise TLS optimization.
* elf/elf.h (R_PPC_TLSGD, R_PPC_TLSLD, DT_PPC_OPT, PPC_OPT_TLS): Define.
(DT_PPC_NUM): Increment.
* elf/dynamic-link.h (HAVE_STATIC_TLS): Define.
(CHECK_STATIC_TLS): Use here.
* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_rela): Optimize
TLS descriptors.
* sysdeps/powerpc/powerpc64/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/powerpc/dl-tls.c: New file.
* sysdeps/powerpc/Versions: Add __tls_get_addr_opt.
* sysdeps/powerpc/tst-tlsopt-powerpc.c: New tls test.
* sysdeps/unix/sysv/linux/powerpc/Makefile: Add new test.
Build tst-tlsmod2.so with --no-tls-get-addr-optimize.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/ld.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/ld.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/ld-le.abilist: Likewise.
In bc0cdc498 the configure check for HAVE_ASM_PPC_REL16 was removed
on the grounds that the minimum binutils supports rel16 relocs. This
is true, but not all references to HAVE_ASM_PPC_REL16 in the sources
were removed.
* config.h.in: Remove HAVE_ASM_PPC_REL16.
* sysdeps/powerpc/powerpc32/tls-macros.h: Remove HAVE_ASM_PPC_REL16
and false branch of conditional.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/swapcontext-common.S:
Likewise.
With AIX port deprecated there is no need to check/define
HAVE_ASM_GLOBAL_DOT_NAME anymore since the current minimum binutils
supported (2.22) does not emit global symbol with dot.
This patch removes all the HAVE_ASM_GLOBAL_DOT_NAME definition and
checks for powerpc64 port.
posix_spawn (a standard POSIX function) brings in a use of getrlimit64
(not a standard POSIX function). This patch fixes this by using
__getrlimit64 and making getrlimit64 a weak alias.
This is more complicated than some such changes because of files that
define getrlimit64 in their own way using symbol versioning after
including the main sysdeps/unix/sysv/linux/getrlimit64.c with a
getrlimit macro defined. There are various existing patterns for such
cases in glibc; the one I've used here is that a getrlimit64 macro
disables the weak_alias / libc_hidden_weak calls, leaving it to the
including file to define the getrlimit64 name in whatever way is
appropriate.
Tested for x86_64 and x86 that installed stripped shared libraries are
unchanged by this patch.
[BZ #17991]
* include/sys/resource.h (__getrlimit64): Declare. Use
libc_hidden_proto.
* resource/getrlimit64.c (getrlimit64): Rename to __getrlimit64
and define as weak alias of __getrlimit64. Use libc_hidden_weak.
* sysdeps/posix/spawni.c (__spawni): Call __getrlimit64 instead of
getrlimit64.
* sysdeps/unix/sysv/linux/getrlimit64.c (getrlimit64): Rename to
__getrlimit64.
[!getrlimit64] (getrlimit64): Define as weak alias of
__getrlimit64. Use libc_hidden_weak.
* sysdeps/unix/sysv/linux/i386/getrlimit64.c (getrlimit64): Define
using __getrlimit64 not __new_getrlimit64.
(__GI_getrlimit64): Likewise.
* sysdeps/unix/sysv/linux/mips/getrlimit64.c (getrlimit64):
Likewise.
(__GI_getrlimit64): Likewise.
(__old_getrlimit64): Use __getrlimit64 not __new_getrlimit64.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/syscalls.list
(getrlimit): Add __getrlimit64 alias.
* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list (getrlimit):
Likewise.
* conform/Makefile (test-xfail-XOPEN2K/spawn.h/linknamespace):
Remove variable.
(test-xfail-POSIX2008/spawn.h/linknamespace): Likewise.
(test-xfail-XOPEN2K8/spawn.h/linknamespace): Likewise.
This patch fix powerpc __get_clockfreq racy and cancel-safe issues by
dropping internal static cache and by using nocancel file operations.
The vDSO failure check is also removed, since kernel code does not
return an error (it cleans cr0.so bit on function return) and the static
code (to read value /proc) now uses non-cancellable calls.
This commit fixes semaphore destruction by either using 64b atomic
operations (where available), or by using two separate fields when only
32b atomic operations are available. In the latter case, we keep a
conservative estimate of whether there are any waiting threads in one
bit of the field that counts the number of available tokens, thus
allowing sem_post to atomically both add a token and determine whether
it needs to call futex_wake.
See:
https://sourceware.org/ml/libc-alpha/2014-12/msg00155.html
Linux kernel powerpc documentation states issuing a syscall inside a
transaction is not recommended and may lead to undefined behavior. It
also states syscalls does not abort transactoin neither they run in
transactional state.
To avoid side-effects being visible outside transactions, GLIBC with
lock elision enabled will issue a transaction abort instruction just
before all syscalls if hardware supports hardware transactions.
This patch adds support for lock elision using ISA 2.07 hardware
transactional memory for rwlocks. The logic is similar to the
one presented in pthread_mutex lock elision.
This patch adds support for lock elision using ISA 2.07 hardware
transactional memory instructions for pthread_mutex primitives.
Similar to s390 version, the for elision logic defined in
'force-elision.h' is only enabled if ENABLE_LOCK_ELISION is defined.
Also, the lock elision code should be able to be built even with
a compiler that does not provide HTM support with builtins.
However I have noted the performance is sub-optimal due scheduling
pressures.
Continuing the removal of unused __libc_* function names, this patch
removes the __libc_waitpid name.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by the patch; __waitpid, which is exported from
shared libc, changes from weak to strong on some configurations, which
is of no significance).
* include/sys/wait.h (__libc_waitpid): Remove declaration.
* posix/waitpid.c (__libc_waitpid): Rename to __waitpid.
(__waitpid): Don't define as alias. Use libc_hidden_def not
libc_hidden_weak.
(waitpid): Define as alias of __waitpid.
* sysdeps/unix/bsd/waitpid.c (__libc_waitpid): Rename to
__waitpid.
(__waitpid): Don't define as alias. Use libc_hidden_def not
libc_hidden_weak.
(waitpid): Define as alias of __waitpid.
* sysdeps/unix/sysv/linux/i386/syscalls.list (waitpid): Remove
__libc_waitpid alias.
* sysdeps/unix/sysv/linux/m68k/syscalls.list (waitpid): Likewise.
* sysdeps/unix/sysv/linux/powerpc/syscalls.list (waitpid):
Likewise.
* sysdeps/unix/sysv/linux/sh/syscalls.list (waitpid): Likewise.
* sysdeps/unix/sysv/linux/sparc/syscalls.list (waitpid): Likewise.
* sysdeps/unix/sysv/linux/tile/waitpid.S (__libc_waitpid): Remove
alias.
* sysdeps/unix/sysv/linux/waitpid.c (__libc_waitpid): Rename to
__waitpid.
(__waitpid): Don't define as alias. Use libc_hidden_def not
libc_hidden_weak.
(waitpid): Define as alias of __waitpid.
For maximum paranoia we run ld.so through the normal set
of tests for all of the shared libraries. This includes
running ld.so through check-localplt, check-textrel, and
check-execstack. While none of these should trigger any
failures given the way ld.so is built, it might possibly
fail if a developer does something wrong. This paranoia
was triggered by a discussion over the use of __strcpy
vs. strcpy [1] and if the symbol could leak and use the
libc.so version.
The check-localplt test fails right away because localplt.data
needs updating for all arches. By default we add 6 new symbols:
__tls_get_addr, __libc_memalign, malloc, calloc, realloc and
free. Other machines like i386, power, and s390 require some
different symbol sets e.g. ___tls_get_addr vs. __tls_get_addr
for i386.
Verified for i386
Verified for x86_64
Verified for ppc32
Verified for ppc64
Verified for ppc64le
Verified for arm
Verified for aarch64
Verified for s390
Verified for s390x
Guessed for alpha
Guessed for ia64
Guessed for m68k
Guessed for microblaze
Guessed for sparc32
Guessed for sparc64
Defaults for sh
Defaults for mips
Defaults for hppa
Defaults for tile
Machine manintainers notified to double check the data
used in localplt.data.
[1] https://sourceware.org/ml/libc-alpha/2014-10/msg00548.html
Concluding the move of syscall definitions to syscalls.list, where the
removal of support for old kernel versions has made this possible,
this patch removes C definitions of pread, pread64, pwrite and
pwrite64 for powerpc64. As far as I can tell, the existing
syscalls.list definitions in
sysdeps/unix/sysv/linux/wordsize-64/syscalls.list should suffice to
produce results equivalent to what these C files do.
[BZ #14138]
* sysdeps/unix/sysv/linux/powerpc/powerpc64/pread.c: Remove file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/pread64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/pwrite.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/pwrite64.c: Likewise.
This patch enables syscalls.list entries to specify both compat and
non-compat symbol versions for the same syscall definition, making use
of this for setrlimit / chown / lchown where the inability to specify
such aliases showed up in the course of work on bug 14138.
The change to make-syscalls.sh is minimal: adding a SHARED conditional
on the compat_symbol calls. It remains the case that if a compat
symbol version is specified, the syscall is only built for the shared
library at all if an explicit symbol version is given for a non-compat
symbol (so it's necessary to specify "lchown@@GLIBC_2.0
chown@GLIBC_2.0" rather than just "lchown chown@GLIBC_2.0"). It also
remains the case, as already commented in make-syscalls.sh, that no
SHLIB_COMPAT conditionals are generated, so there would be problems if
the same syscalls.list file, with compat symbols, were used for both
configurations that should have those symbols and configurations for
which they should be conditioned out with SHLIB_COMPAT.
Tested for x86.
* sysdeps/unix/make-syscalls.sh (emit_weak_aliases): Condition
compat_symbol calls on [SHARED].
* sysdeps/unix/sysv/linux/powerpc/lchown.S: Remove file.
* sysdeps/unix/sysv/linux/i386/syscalls.list (oldsetrlimit):
Remove.
(setrlimit): Add setrlimit@GLIBC_2.0 alias.
* sysdeps/unix/sysv/linux/m68k/m680x0/syscalls.list
(oldsetrlimit): Remove.
(setrlimit): Add setrlimit@GLIBC_2.0 alias.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list
(lchown): New syscall entry.
(oldsetrlimit): Remove.
(setrlimit): Add setrlimit@GLIBC_2.0 alias.
* sysdeps/unix/sysv/linux/s390/s390-32/syscalls.list
(oldsetrlimit): Remove.
(setrlimit): Add setrlimit@GLIBC_2.0 alias.
Continuing the move of syscall definitions to syscalls.list, where the
removal of support for old kernel versions has made this possible,
this patch moves various definitions of chown, lchown and fchown.
In most cases the need for special syscalls.list entries (rather than
existing generic ones) is because these architectures use chown32,
lchown32 and fchown32 as syscall names. Some architectures also have
symbol versioning compatibility for older versions of chown having
been equivalent to lchown.
In the case of powerpc, chown.c (providing the chown@@GLIBC_2.1
default version) is replaced by a syscalls.list entry (for powerpc32;
powerpc64 has no need for this because of its more recent minimum
symbol version, so can just use the entry in
sysdeps/unix/syscalls.list), but lchown.S is left as-is because it
provides the compat version of chown as an actual alias for __lchown,
which is not yet supported by syscalls.list. This file can be removed
once such aliases are supported in syscalls.list.
[BZ #14138]
* sysdeps/unix/sysv/linux/arm/fchown.c: Remove file.
* sysdeps/unix/sysv/linux/arm/lchown.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/fchown.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/lchown.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/chown.c: Likewise.
* sysdeps/unix/sysv/linux/arm/syscalls.list (lchown): Add syscall.
(fchown): Likewise.
* sysdeps/unix/sysv/linux/m68k/syscalls.list (lchown): Likewise.
(fchown): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list (chown):
Likewise.
When a shlib-versions file has a DEFAULT line, it's not necessary to
specify the same default minimum symbol version on the lines for
individual libraries. If those lines otherwise duplicate the default
SONAME for the library in question, they can be removed completely.
This patch makes such cleanups: version entries for ld.so are removed
(leaving just the definition of the architecture-specific dynamic
linker name) and entries for libpthread are removed completely (since
the default is libpthread.so.0).
Tested for x86_64 that the installed shared libraries are unchanged by
this patch.
There are various architectures (hppa, ia64, mips, sh, sparc64) that
define minimum symbol versions (or in the case of mips, omission of
symbol versions) only for particular libraries without a DEFAULT line.
None of these are equivalent to something simpler with a DEFAULT line
because all have some other libraries, not explicitly mentioned, with
symbol versions that would be omitted were such a line used. In the
mips case I'm pretty sure it was a mistake not to omit the 2.1 symbols
for libthread_db; for the others I don't know if it was a mistake or
deliberate that some symbols in various libraries have 2.0 or 2.1
versions despite other libraries having a 2.2 minimum.
This concludes the shlib-versions cleanups I'm aware of.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions: Do not
specify symbol version for ld.so. Do not include entry for
libpthread.
* sysdeps/unix/sysv/linux/s390/s390-64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/shlib-versions: Likewise.
This patch eliminates the mixture of SONAME information in
shlib-versions files and SONAME information used to generate
gnu/lib-names.h in makefiles, with the information in the makefiles
being removed so all this information comes from the shlib-versions
files.
So that gnu/lib-names.h supports multiple ABIs, it is changed to be
generated on the same basis as gnu/stubs.h: when there are multiple
ABIs, gnu/lib-names.h is a wrapper header (the same header installed
whatever ABI is being built) and separate headers such as
gnu/lib-names-64.h contain the substantive contents (only one such
header being installed by any glibc build).
The rules for building gnu/lib-names.h were moved from Makeconfig to
Makerules because they need to come after sysdeps makefiles are
included (now that "ifndef abi-variants" is a toplevel conditional on
the rules rather than $(abi-variants) being evaluated later inside the
commands for a rule).
Tested for x86_64 and x86 that the installed shared libraries are
unchanged by this patch, and examined the installed gnu/lib-names*.h
headers by hand. Also tested the case of a single ABI (where there is
just a single header installed, again like stubs.h) by hacking
abi-variants to empty for x86_64.
[BZ #14171]
* Makeconfig [$(build-shared) = yes]
($(common-objpfx)soversions.mk): Don't handle SONAMEs specified in
makefiles.
[$(build-shared) = yes && $(soversions.mk-done) = t]
($(common-objpfx)gnu/lib-names.h): Remove rule.
[$(build-shared) = yes && $(soversions.mk-done) = t]
($(common-objpfx)gnu/lib-names.stmp): Likewise. Split and moved
to Makerules.
[$(build-shared) = yes && $(soversions.mk-done) = t]
(before-compile): Don't append $(common-objpfx)gnu/lib-names.h
here.
[$(build-shared) = yes && $(soversions.mk-done) = t]
(common-generated): Don't append gnu/lib-names.h and
gnu/lib-names.stmp here.
* Makerules [$(build-shared) = yes && $(soversions.mk-done) = t]
(lib-names-h-abi): New variable.
[$(build-shared) = yes && $(soversions.mk-done) = t]
(lib-names-stmp-abi): Likewise.
[$(build-shared) = yes && $(soversions.mk-done) = t &&
abi-variants] (before-compile): Append
$(common-objpfx)$(lib-names-h-abi).
[$(build-shared) = yes && $(soversions.mk-done) = t &&
abi-variants] (common-generated): Append gnu/lib-names.h.
[$(build-shared) = yes && $(soversions.mk-done) = t &&
abi-variants] (install-others-nosubdir): Depend on
$(inst_includedir)/$(lib-names-h-abi).
[$(build-shared) = yes && $(soversions.mk-done) = t &&
abi-variants] ($(common-objpfx)gnu/lib-names.h): New rule.
[$(build-shared) = yes && $(soversions.mk-done) = t]
($(common-objpfx)$(lib-names-h-abi)): New rule.
[$(build-shared) = yes && $(soversions.mk-done) = t]
($(common-objpfx)$(lib-names-stmp-abi)): Likewise.
[$(build-shared) = yes && $(soversions.mk-done) = t]
(common-generated): Append $(lib-names-h-abi) and
$(lib-names-stmp-abi).
* scripts/lib-names.awk: Do not handle multi being set.
* sysdeps/unix/sysv/linux/aarch64/Makefile (abi-lp64-ld-soname):
Remove variable.
(abi-lp64_be-ld-soname): Likewise.
* sysdeps/unix/sysv/linux/arm/Makefile (abi-soft-ld-soname):
Likewise.
(abi-hard-ld-soname): Likewise.
* sysdeps/unix/sysv/linux/i386/shlib-versions: New file.
* sysdeps/unix/sysv/linux/mips/Makefile (abi-o32_soft-ld-soname):
Remove variable.
(abi-o32_hard-ld-soname): Likewise.
(abi-o32_soft_2008-ld-soname): Likewise.
(abi-o32_hard_2008-ld-soname): Likewise.
(abi-n32_soft-ld-soname): Likewise.
(abi-n32_hard-ld-soname): Likewise.
(abi-n32_soft_2008-ld-soname): Likewise.
(abi-n32_hard_2008-ld-soname): Likewise.
(abi-n64_soft-ld-soname): Likewise.
(abi-n64_hard-ld-soname): Likewise.
(abi-n64_soft_2008-ld-soname): Likewise.
(abi-n64_hard_2008-ld-soname): Likewise.
* sysdeps/unix/sysv/linux/powerpc/Makefile (abi-64-v1-ld-soname):
Likewise.
(abi-64-v2-ld-soname): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions: Add
ld.so entries.
* sysdeps/unix/sysv/linux/s390/Makefile (abi-64-ld-soname): Remove
variable.
* sysdeps/unix/sysv/linux/s390/s390-64/shlib-versions: Add ld.so
entry.
* sysdeps/unix/sysv/linux/x86/Makefile (abi-32-ld-soname): Remove
variable.
(abi-64-ld-soname): Likewise.
(abi-x32-ld-soname): Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/shlib-versions: Add ld.so
entry.
* sysdeps/unix/sysv/linux/x86_64/x32/shlib-versions: Likewise.
Bug 14138 is followup cleanup after removal of support for old Linux
kernel versions: moving syscalls to syscalls.list where the only
reason for using C definitions was kernel version conditionals that
are no longer present.
This patch deals with the case of setrlimit
(sysdeps/unix/sysv/linux/i386/setrlimit.c, included by various other
architectures). Where needed (where there is also a compat symbol for
setrlimit@GLIBC_2.0), new syscalls.list entries are added. Where not
needed (where there is no such compat symbol and the minimum symbol
version for libc is 2.2 or later), no such entries are added as that
in sysdeps/unix/syscalls.list will suffice. Thus arm and sh need no
such entries, while m68k and powerpc need entries only in a
subdirectory syscalls.list file rather than for all configurations
that previously used setrlimit.c.
(setrlimit@@GLIBC_2.2 and setrlimit@GLIBC_2.0 are now semantically
identical - the new symbol version was about a change of types from
signed to unsigned and the former compatibility code for dealing with
large unsigned arguments on old kernels is no longer needed or
present, having been removed with support for pre-2.4 kernels.
However, making the two versions into aliases doesn't work at present:
the case of having both default and non-default symbol versions on the
same syscalls.list line results in a compat_symbol call in code built
for static libc, which doesn't compile. I don't suppose it would be
hard to generate SHARED conditionals from make-syscalls.sh to fix
this, but in any case this patch doesn't make things any worse, as the
functions weren't aliases before the patch either.)
Tested for x86, and ran ABI tests for ARM as an example of an
architecture where the setrlimit.c file was just removed without
adding syscalls.list entries.
[BZ #14138]
* sysdeps/unix/sysv/linux/arm/setrlimit.c: Remove file.
* sysdeps/unix/sysv/linux/i386/setrlimit.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/setrlimit.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/setrlimit.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/setrlimit.c: Likewise.
* sysdeps/unix/sysv/linux/sh/setrlimit.c: Likewise.
* sysdeps/unix/sysv/linux/i386/syscalls.list (setrlimit): Add
syscall entry for GLIBC_2.2 symbol version.
* sysdeps/unix/sysv/linux/m68k/m680x0/syscalls.list (setrlimit):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list
(setrlimit): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/syscalls.list (setrlimit):
Likewise.
This patch removes the first column (patterns matching configuration
names) from shlib-versions, leaving shlib-versions entry selection
based purely on sysdeps directories.
An implication of this removal is that the default for any non-Linux
ports using NPTL will be the same SONAMEs for NPTL libraries as for
Linux (as those defaults, previously limited to .*-.*-linux.*, are
left in nptl/shlib-versions and nptl_db/shlib-versions).
Special host_os handling in configure.ac that was purely for
shlib-versions is removed. (The host_os setting is still used for
libc-abis - see
<https://sourceware.org/ml/libc-alpha/2014-01/msg00375.html> regarding
that - but no entries there are affected by this change.)
Tested on x86_64 and x86 that the installed shared libraries are
unchanged by this patch.
* scripts/soversions.awk: Do not handle configuration names.
* Makeconfig ($(common-objpfx)soversions.i): Do not pass cpu,
vendor and os variables to soversions.awk.
* configure.ac: Do not modify gnu-* host_os.
* configure: Regenerated
* shlib-versions: Remove first column with configuration names.
* nptl/shlib-versions: Likewise.
* nptl_db/shlib-versions: Likewise.
* sysdeps/hppa/shlib-versions: Likewise.
* sysdeps/m68k/shlib-versions: Likewise.
* sysdeps/mach/hurd/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/aarch64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/alpha/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/arm/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/hppa/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/ia64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/microblaze/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/mips/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/sh/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/tile/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/shlib-versions: Likewise.
libidn/ChangeLog:
* shlib-versions: Remove first column with configuration names.
This patch makes
sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions use %ifdef
conditionals around the different symbol version definitions for big
and little endian. (It doesn't actually change the host patterns used
for those definitions; the point is to make it possible to remove the
first column from shlib-versions by eliminating the last case where it
would be harmful for it to be treated as .*-.*-.*.) The conditional
is based on the ELFv1/ELFv2 distinction rather than BE/LE, since
that's what's already tested in configure and used for the ld.so
soname in the Makefiles. (Of course if BE ELFv2 were supported in
future, it would get new symbol versions and so need new
conditionals.)
* sysdeps/unix/sysv/linux/powerpc/powerpc64/configure.ac
(HAVE_ELFV2_ABI): AC_DEFINE in ELFv2 case.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/configure:
Regenerated.
* config.h.in (HAVE_ELFV2_ABI): New macro undefine.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions:
Condition symbol version definitions on [HAVE_ELFV2_ABI].
This patch eliminates another way in which ex-ports and non-ex-ports
architectures differ, by moving architecture-specific entries from the
top-level shlib-versions file and that in nptl/ to appropriate sysdeps
directories. As with my previous patch
<https://sourceware.org/ml/libc-alpha/2014-06/msg00949.html>, I do not
change the regular expressions used; even where the present
expressions seem more general, I believe they are in fact specific to
the chosen sysdeps directory, because any port that matches the
expression but not the sysdeps directory does not currently exist, and
so would use different symbol versions if added in future (and an
intended goal of these changes is to eliminate the first column in
shlib-versions completely rather than having two different mechanisms
in use for system-specific configuration).
Tested on x86_64 that this does not change the installed shared
libraries. (x86_64 of course does not provide much test coverage for
this patch - what should be architecture-specific contents in
shlib-versions for x86_64 is currently abi-*-ld-soname Makefile
settings, until gnu/lib-names.h is generated more like gnu/stubs.h so
those can move back to shlib-versions.)
* nptl/shlib-versions: Remove architecture-specific entries.
Moved to files in sysdeps.
* shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions: New
file.
* sysdeps/unix/sysv/linux/s390/s390-64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/sh/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/shlib-versions: Likewise.
In my powerpc32 testing I've observed misc/test-gettimebasefreq
failing.
This is a glibc build (soft-float, though that's not relevant here)
without any --with-cpu and without any special configuration of the
default CPU for GCC either. In particular, it's one not using
sysdeps/powerpc/powerpc32/power4/hp-timing.h (although in fact the
processor I'm using for testing is POWER4-based), so hp_timing_t is
32-bit not 64-bit. But the VDSO call being used by
INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK is generating a 64-bit result
(high part in r3, low part in r4). The code extracting that result,
however, expects a result of the type hp_timing_t as passed to
INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK, meaning that only r3 (= 0) is
used and the value in r4 is ignored. This patch fixes this by always
using uint64_t as the type in INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK -
reflecting the actual ABI (unconditional in the kernel) of that VDSO
call. This is the minimal change for this issue - no check for
overflow, no change of the type of the timebase_freq variable or the
return type of __get_clockfreq to something other than hp_timing_t
(such a change would simply move the implicit conversions to the over
callers of that function), no change to hp_timing_t itself.
Tested for powerpc32 soft float.
[BZ #17263]
* sysdeps/unix/sysv/linux/powerpc/get_clockfreq.c: Include
<stdint.h>.
(__get_clockfreq): Use uint64_t instead of hp_timing_t in
INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK call.
This patch fixes the incorrect guard by __USE_MISC of struct winsize and
struct termio in powerpc termios header. Current states leads to build
failures if the program defines _XOPEN_SOURCE, but not _DEFAULT_SOURCE
or either _BSD_SOURCE or _SVID_SOURCE. Without any definition,
__USE_MISC will not be defined and neither the struct definitions.
This patch copies the default Linux ioctl-types.h by adjusting only the
character control field (c_cc) size in struct termio.
