On some microarchitectures performance of the backwards memmove improves if
the stores use STR with decreasing addresses. So change the memmove loop
in memcpy_advsimd.S to use 2x STR rather than STP.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Support building three variants of 32-bit RISC-V glibc as follows:
- riscv32-linux-gnu-rv32imac-ilp32
- riscv32-linux-gnu-rv32imafdc-ilp32
- riscv32-linux-gnu-rv32imafdc-ilp32d
Reviewed-by: Maciej W. Rozycki <macro@wdc.com>
There is already RISC-V 64-bit port information in the documentation.
Let's add some documentation entries for the RISC-V 32-bit as well.
Reviewed-by: Maciej W. Rozycki <macro@wdc.com>
This patch lays out the top-level organisation of the RISC-V 32-bit port.
It provides all the Implies files as well as various other fragments of
the build infrastructure.
Reviewed-by: Maciej W. Rozycki <macro@wdc.com>
Specify the minimum kernel version for RISC-V 32-bit as the 5.4 kernel.
We require this commit: "waitid: Add support for waiting for the current
process group" for the kernel as it adds support for the P_PGID id for
the waitid syscall. Without this patch we can't replace the wait4
syscall on 64-bit time_t only systems.
Reviewed-by: Maciej W. Rozycki <macro@wdc.com>
Conversions from a float to a long long on 32-bit RISC-V (RV32) may not
raise the correct exceptions on overflow, it also may raise spurious
"inexact" exceptions on non overflow cases. This patch fixes the
problem, similarly to the fix for MIPS, ARM and S390.
Reviewed-by: Maciej W. Rozycki <macro@wdc.com>
Add a libm-test-ulps for RV32, this is the same as the RV64 one.
This dosn't match what is generated by running `make regen-ulps` on RV32
QEMU, but the current in tree RV64 doesn't match that either.
Reviewed-by: Maciej W. Rozycki <macro@wdc.com>
This patch adds the ABI implementation for 32-bit RISC-V. It contains
the Linux-specific and RISC-V architecture code.
Reviewed-by: Maciej W. Rozycki <macro@wdc.com>
With RV32 support the list of possible RISC-V system directories
increases to:
- /lib64/lp64d
- /lib64/lp64
- /lib32/ilp32d
- /lib32/ilp32
- /lib (only ld.so)
This patch changes the add_system_dir () macro to support the new ilp32d
and ilp32 directories for RV32. While refactoring this code let's split
out the confusing if statements into a loop to make it easier to
understand and extend.
Reviewed-by: Maciej W. Rozycki <macro@wdc.com>
sysdep.h redefines only the syscall where the generic implementation
still does not have actual 64-bit time_t support:
/* Workarounds for generic code needing to handle 64-bit time_t. */
/* Fix sysdeps/unix/sysv/linux/clock_getcpuclockid.c. */
#define __NR_clock_getres __NR_clock_getres_time64
/* Fix sysdeps/nptl/lowlevellock-futex.h. */
#define __NR_futex __NR_futex_time64
[...]
This patch also adds a comment that it is a workaround to handle 64-bit
time_t and on each #define comment for which implementation it intends
to.
Reviewed-by: Maciej W. Rozycki <macro@wdc.com>
Remove a duplicate inclusion of <sysdeps/unix/sysdep.h> which is already
pulled via <sysdeps/unix/sysv/linux/generic/sysdep.h>, and the inclusion
of <errno.h> whose definition of `__set_errno' is not needed here.
Reviewed-by: Maciej W. Rozycki <macro@wdc.com>
Using the original glibc headers under bits/ let's make small
modifications to use 64-bit time_t and off_t for both RV32 and RV64.
For the typesizes.h, here are justifications for the changes from the
generic version (based on Arnd's very helpful feedback):
- All the !__USE_FILE_OFFSET64 types (__off_t, __ino_t, __rlim_t, ...)
are changed to match the 64-bit replacements.
- __time_t is defined to 64 bit, but no __time64_t is added. This makes
sense as we don't have the time64 support for other 32-bit
architectures yet, and it will be easy to change when that happens.
- __suseconds_t is 64-bit. This matches what we use the kernel ABI for
the few drivers that are relying on 'struct timeval' input arguments
in ioctl, as well as the adjtimex system call. It means that timeval
has to be defined without the padding, unlike timespec, which needs
padding.
Reviewed-by: Maciej W. Rozycki <macro@wdc.com>
It's possible that although __OFF_T_MATCHES_OFF64_T is defined the
included the relevent header file. This results in a io/tst-lockf
failure for RV32 by calling the non 64-bit version of lockf. This
patch fixes the failure by including bits/types.h.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The _sys_errlist and _sys_siglist symbols are deprecated since 2.32.
This patch adds a TEST_COMPAT check around the tests. This fixes test
failures on new architectures (such as RV32) that don't have this
symbol defined.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
With arch-syscall.h it can now assumes the existance of either
__NR_utimensat or __NR_utimensat_time64. The 32-bit time_t
support is now only build for !__ASSUME_TIME64_SYSCALLS.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Lukasz Majewski <lukma@denx.de>
With arch-syscall.h it can now assumes the existance of either
__NR_timer_settime or __NR_time_settime_time64. The 32-bit time_t
support is now only build for !__ASSUME_TIME64_SYSCALLS.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Lukasz Majewski <lukma@denx.de>
With arch-syscall.h it can now assumes the existance of either
__NR_timer_gettime or __NR_time_gettime_time64. The 32-bit time_t
support is now only build for !__ASSUME_TIME64_SYSCALLS.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Lukasz Majewski <lukma@denx.de>
With arch-syscall.h it can now assumes the existance of either
__NR_sched_rr_get_interval or __NR_sched_rr_get_interval_time64.
The 32-bit time_t support is now only build for
!__ASSUME_TIME64_SYSCALLS.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Lukasz Majewski <lukma@denx.de>
With arch-syscall.h it can now assumes the existance of either
__NR_ppoll or __NR_ppoll_time64. The 32-bit time_t support is now
only build for !__ASSUME_TIME64_SYSCALLS.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Lukasz Majewski <lukma@denx.de>
With arch-syscall.h it can now assumes the existance of either
__NR_mq_timedsend or __NR_mq_timedsend_time64. The 32-bit
time_t support is now only build for !__ASSUME_TIME64_SYSCALLS.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Lukasz Majewski <lukma@denx.de>
With arch-syscall.h it can now assumes the existance of either
__NR_mq_timedreceive or __NR_mq_timedreceive_time64. The 32-bit
time_t support is now only build for !__ASSUME_TIME64_SYSCALLS.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Lukasz Majewski <lukma@denx.de>
With arch-syscall.h it can now assumes the existance of either
__NR_clock_settime or __NR_clock_settime_time64. The 32-bit
time_t support is now only build for !__ASSUME_TIME64_SYSCALLS.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Lukasz Majewski <lukma@denx.de>
With arch-syscall.h it can now assumes the existance of either
__NR_clock_nanosleep or __NR_clock_nanosleep_time64. The 32-bit
time_t support is now only build for !__ASSUME_TIME64_SYSCALLS.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Lukasz Majewski <lukma@denx.de>
With arch-syscall.h it can now assumes the existance of either
__NR_clock_gettime or __NR_clock_gettime_time64. The 32-bit time_t
support is now only build for !__ASSUME_TIME64_SYSCALLS.
It also uses the time64-support functions to simplify it further.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
With arch-syscall.h it can now assumes the existance of either
__NR_clock_adjtime or __NR_clock_adjtime_time64. The 32-bit time_t
support is now only build for !__ASSUME_TIME64_SYSCALLS.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
These helper functions are used to optimize the 64-bit time_t support on
configurations that requires support for 32-bit time_t fallback
(!__ASSUME_TIME64_SYSCALLS). The idea is once the kernel advertises that
it does not have 64-bit time_t support, glibc will stop to try issue the
64-bit time_t syscall altogether.
For instance:
#ifndef __NR_symbol_time64
# define __NR_symbol_time64 __NR_symbol
#endif
int r;
if (supports_time64 ())
{
r = INLINE_SYSCALL_CALL (symbol, ...);
if (r == 0 || errno != ENOSYS)
return r;
mark_time64_unsupported ();
}
#ifndef __ASSUME_TIME64_SYSCALLS
<32-bit fallback syscall>
#endif
return r;
On configuration with default 64-bit time_t this optimization should be
optimized away by the compiler resulting in no overhead.
Unfortunately some HWCAP names like HWCAP_S390_VX differs between
kernel (see <kernel>/arch/s390/include/asm/elf.h) and glibc.
Therefore, those HWCAP names from kernel are now introduced as alias
ProjectQuirks moved into its own file in gnulib because one cannot
import modules with hyphens in them. Adjust the quirks file to
reflect this reality.
On s390x, gcc inlines more aggresive compared to other architectures.
This occaisionally leads to build warnings / errors.
Therefore this patch adds a s390x glibc variant with optimization.
There is the ccopts field which contain ABI options which are passed
to configure as CC / CXX. Now there is also the cflags field which
contains non-ABI options like -g or -O. Those are passed to configure
as CFLAGS / CXXFLAGS.
Currently CC is passed to conformtest.py or linknamespace.py but not
the CFLAGS.
If build with optimization, stdio.h and sys/stat.h are defining some inlining
functions. This leads to test fails if glibc is build with the following
commands. (Note that the conformtests usually builds without optimization or
other CFLAGS):
<glibc>/configure CC="gcc -O3" --prefix=/usr
make
make subdirs=conform check
- FAIL: conform/XPG4/stdio.h/conform
- FAIL: conform/XPG42/stdio.h/conform
out-files:
...
PASSCOMBINED: Availability of variable optopt
PASSCOMBINED: Type of variable optopt
Namespace violation: "getc_unlocked"
Namespace violation: "getchar_unlocked"
Namespace violation: "putc_unlocked"
Namespace violation: "putchar_unlocked"
FAIL: Namespace of <stdio.h>
----------------------------------------------------------------------------
Total number of tests : 168
Number of failed tests : 1
Number of xfailed tests : 0
Number of skipped tests : 0
- FAIL: conform/POSIX2008/sys/stat.h/conform
out-file:
...
PASSCOMBINED: Availability of function utimensat
PASSCOMBINED: Type of function utimensat
Namespace violation: "mknodat"
FAIL: Namespace of <sys/stat.h>
----------------------------------------------------------------------------
Total number of tests : 97
Number of failed tests : 1
Number of xfailed tests : 0
Number of skipped tests : 0
For getc_unlocked, getchar_unlocked, putc_unlocked, putchar_unlocked in stdio.h,
those are defined "# ifdef __USE_POSIX" instead of "#ifdef __USE_POSIX199506"
for the non-inlining declaration. See also
"Bug 20014 - stdio.h namespace for pre-threads POSIX"
(https://sourceware.org/bugzilla/show_bug.cgi?id=20014).
For mknodat in sys/stat.h, those are defined "# ifdef __USE_ATFILE" instead of
the additional guard "# if defined __USE_MISC || defined __USE_XOPEN_EXTENDED".
C2x adds BOOL_MAX and BOOL_WIDTH macros to <limits.h>. This patch
adds them to glibc's <limits.h> for the case when they aren't defined
by GCC's <limits.h>.
Tested for x86_64.
This patch adds the new STATX_MNT_ID, STATX_ATTR_MOUNT_ROOT and
STATX_ATTR_DAX macros from Linux 5.8 to glibc's bits/statx-generic.h.
(As with previous such changes, this only does anything if glibc is
being used with old kernel headers.)
A comment in the Linux kernel headers indicates that STATX_ALL is
deliberately not being changed.
Tested for x86_64.
Properly serialize the access to the global state shared between the
syslog functions, to avoid races in multithreaded processes. Protect a
local allocation in the __vsyslog_internal function from leaking during
cancellation.
Since binutils has obsoleted ia64 support, use --enable-obsolete for
now when configuring binutils for ia64 in build-many-glibcs.py (which
requires adding support for architecture-specific binutils configure
options there). As with other obsoletions, the removal of support for
ia64 in any of (binutils, GCC, Linux kernel) should imply its removal
from glibc.
Tested with build-many-glibcs.py for ia64-linux-gnu (compilers and
glibcs build).
This patch updates the kernel version in the test tst-mman-consts.py
to 5.8. (There are no new MAP_* constants covered by this test in 5.8
that need any other header changes.)
Tested with build-many-glibcs.py.
The pthread_clockjoin_np and pthread_timedjoin_np have been converted to
support 64 bit time.
This change introduces new futex_timed_wait_cancel64 function in
./sysdeps/nptl/futex-internal.h, which uses futex_time64 where possible
and tries to replace low-level preprocessor macros from
lowlevellock-futex.h
The pthread_{timed|clock}join_np only accept absolute time. Moreover,
there is no need to check for NULL passed as *abstime pointer as
clockwait_tid() always passes struct __timespec64.
For systems with __TIMESIZE != 64 && __WORDSIZE == 32:
- Conversions between 64 bit time to 32 bit are necessary
- Redirection to __pthread_{clock|timed}join_np64 will provide support
for 64 bit time
Build tests:
./src/scripts/build-many-glibcs.py glibcs
Run-time tests:
- Run specific tests on ARM/x86 32bit systems (qemu):
https://github.com/lmajewski/meta-y2038 and run tests:
https://github.com/lmajewski/y2038-tests/commits/master
Above tests were performed with Y2038 redirection applied as well as without
to test the proper usage of both __pthread_{timed|clock}join_np64 and
__pthread_{timed|clock}join_np.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
