The addmntent function replicates elements of struct mnt on stack
using alloca, which is unsafe. Put characters directly into the
stream, escaping them as they're being written out.
Also add a test to check all escaped characters with addmntent and
getmntent.
Add Intel Linear Address Masking (LAM) support to <sys/platform/x86.h>.
HAS_CPU_FEATURE (LAM) can be used to detect if LAM is enabled in CPU.
LAM modifies the checking that is applied to 64-bit linear addresses,
allowing software to use of the untranslated address bits for metadata.
Add various defines and stubs for enabling MTE on AArch64 sysv-like
systems such as Linux. The HWCAP feature bit is copied over in the
same way as other feature bits. Similarly we add a new wrapper header
for mman.h to define the PROT_MTE flag that can be used with mmap and
related functions.
We add a new field to struct cpu_features that can be used, for
example, to check whether or not certain ifunc'd routines should be
bound to MTE-safe versions.
Finally, if we detect that MTE should be enabled (ie via the glibc
tunable); we enable MTE during startup as required.
Support in the Linux kernel was added in version 5.10.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Older versions of the Linux kernel headers obviously lack support for
memory tagging, but we still want to be able to build in support when
using those (obviously it can't be enabled on such systems).
The linux kernel extensions are made to the platform-independent
header (linux/prctl.h), so this patch takes a similar approach.
This patch adds the basic support for memory tagging.
Various flavours are supported, particularly being able to turn on
tagged memory at run-time: this allows the same code to be used on
systems where memory tagging support is not present without neededing
a separate build of glibc. Also, depending on whether the kernel
supports it, the code will use mmap for the default arena if morecore
does not, or cannot support tagged memory (on AArch64 it is not
available).
All the hooks use function pointers to allow this to work without
needing ifuncs.
Reviewed-by: DJ Delorie <dj@redhat.com>
Add a new glibc tunable: mem.tagging. This is a decimal constant in
the range 0-255 but used as a bit-field.
Bit 0 enables use of tagged memory in the malloc family of functions.
Bit 1 enables precise faulting of tag failure on platforms where this
can be controlled.
Other bits are currently unused, but if set will cause memory tag
checking for the current process to be enabled in the kernel.
This patch adds the configuration machinery to allow memory tagging to be
enabled from the command line via the configure option --enable-memory-tagging.
The current default is off, though in time we may change that once the API
is more stable.
This is clever, but it confuses downstream detection in at least zstd
and GNOME's glib. zstd has preprocessor tests for the 'st_mtime' macro,
which is not provided by the path using the anonymous union; glib checks
for the presence of 'st_mtimensec' in struct stat but then tries to
access that field in struct statx (which might be a bug on its own).
Checked with a build for alpha-linux-gnu.
setjmp() uses C code to store current registers into jmp_buf
environment. -fstack-protector-all places canary into setjmp()
prologue and clobbers 'a5' before it gets saved.
The change inhibits stack canary injection to avoid clobber.
The byte 0xfe as input to the EUC-KR conversion denotes a user-defined
area and is not allowed. The from_euc_kr function used to skip two bytes
when told to skip over the unknown designation, potentially running over
the buffer end.
This change is required in order to correctly release per-thread
resources. Directly reusing the threading library reference isn't
possible since the sigstate is also used early in the main thread,
before threading is initialized.
* hurd/hurd/signal.h (_hurd_self_sigstate): Drop thread reference after
calling _hurd_thread_sigstate.
(_hurd_critical_section_lock): Likewise.
* hurd/hurdsig.c (_hurd_thread_sigstate): Add a reference on the thread.
(_hurd_sigstate_delete): Drop thread reference.
When SA_SIGINFO is available, sysdeps/posix/s?profil.c use it, so we have to
fix the __profil_counter function accordingly, using sigcontextinfo.h's
sigcontext_get_pc.
SA_SIGINFO is actually just another way of expressing what we were
already passing over with struct sigcontext. This just introduces the
SIGINFO interface and fixes the posix values when that interface is
requested by the application.
asin and acos have slow paths for rounding the last bit that cause some
calls to be 500-1500x slower than average calls.
These slow paths are rare, a test of a trillion (1.000.000.000.000)
random inputs between -1 and 1 showed 32870 slow calls for acos and 4473
for asin, with most occurrences between -1.0 .. -0.9 and 0.9 .. 1.0.
The slow paths claim correct rounding and use __sin32() and __cos32()
(which compare two result candidates and return the closest one) as the
final step, with the second result candidate (res1) having a small offset
applied from res. This suggests that res and res1 are intended to be 1
ULP apart (which makes sense for rounding), barring bugs, allowing us to
pick either one and still remain within 1 ULP of the exact result.
Remove the slow paths as the accuracy is better than 1 ULP even without
them, which is enough for glibc.
Also remove code comments claiming correctly rounded results.
After slow path removal, checking the accuracy of 14.400.000.000 random
asin() and acos() inputs showed only three incorrectly rounded
(error > 0.5 ULP) results:
- asin(-0x1.ee2b43286db75p-1) (0.500002 ULP, same as before)
- asin(-0x1.f692ba202abcp-4) (0.500003 ULP, same as before)
- asin(-0x1.9915e876fc062p-1) (0.50000000001 ULP, previously exact)
The first two had the same error even before this commit, and they did
not use the slow path at all.
Checking 4934 known randomly found previously-slow-path asin inputs
shows 25 calls with incorrectly rounded results, with a maximum error of
0.500000002 ULP (for 0x1.fcd5742999ab8p-1). The previous slow-path code
rounded all these inputs correctly (error < 0.5 ULP).
The observed average speed increase was 130x.
Checking 36240 known randomly found previously-slow-path acos inputs
shows 42 calls with incorrectly rounded results, with a maximum error of
0.500000008 ULP (for 0x1.f63845056f35ep-1). The previous "exact"
slow-path code showed 34 calls with incorrectly rounded results, with the
same maximum error of 0.500000008 ULP (for 0x1.f63845056f35ep-1).
The observed average speed increase was 130x.
The functions could likely be trimmed more while keeping acceptable
accuracy, but this at least gets rid of the egregiously slow cases.
Tested on x86_64.
The len variable is only used in the else branch.
We don't need the call to strlen if the name is 0 or 1 characters long.
2019-10-02 Lode Willems <Lode.Willems@UGent.be>
* tdlib/getenv.c: Move the call to strlen into the branch it's used.
This patch updates the kernel version in the test tst-mman-consts.py
to 5.10. (There are no new MAP_* constants covered by this test in
5.10 that need any other header changes.)
Tested with build-many-glibcs.py.
GCC 6.5 fails to correctly build ldconfig with recent ld.so.cache
commits, e.g.:
785969a047
elf: Implement a string table for ldconfig, with tail merging
If glibc is build with gcc 6.5.0:
__builtin_add_overflow is used in
<glibc>/elf/stringtable.c:stringtable_finalize()
which leads to ldconfig failing with "String table is too large".
This is also recognizable in following tests:
FAIL: elf/tst-glibc-hwcaps-cache
FAIL: elf/tst-glibc-hwcaps-prepend-cache
FAIL: elf/tst-ldconfig-X
FAIL: elf/tst-ldconfig-bad-aux-cache
FAIL: elf/tst-ldconfig-ld_so_conf-update
FAIL: elf/tst-stringtable
See gcc "Bug 98269 - gcc 6.5.0 __builtin_add_overflow() with small
uint32_t values incorrectly detects overflow"
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98269)
The secondary/non-primary/inner libc (loaded via dlmopen, LD_AUDIT,
static dlopen) must not use sbrk to allocate member because that would
interfere with allocations in the outer libc. On Linux, this does not
matter because sbrk itself was changed to fail in secondary libcs.
_dl_addr occasionally shows up in profiles, but had to be used before
because __libc_multiple_libs was unreliable. So this change achieves
a slight reduction in startup time.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Change sbrk to fail for !__libc_initial (in the generic
implementation). As a result, sbrk is (relatively) safe to use
for the __libc_initial case (from the main libc). It is therefore
no longer necessary to avoid using it in that case (or updating the
brk cache), and the __libc_initial flag does not need to be updated
as part of dlmopen or static dlopen.
As before, direct brk system calls on Linux may lead to memory
corruption.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
GCC 11 with
commit 6fbec038f7a7ddf29f074943611b53210d17c40c
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Mon Feb 3 11:55:43 2020 -0800
Use SHF_GNU_RETAIN to preserve symbol definitions
places used symbols in SECTION_RETAIN sections if assembler supports it.
Mark __libc_freeres_fn as used to avoid
gconv_dl.c: In function 'free_mem':
gconv_dl.c:191:1: error: 'do_release_all' without 'used' attribute and 'free_mem' with 'used' attribute are placed in a section with the same name [-Werror=attributes]
191 | do_release_all (void *nodep)
| ^~~~~~~~~~~~~~
In file included from <command-line>:
gconv_dl.c:202:18: note: 'free_mem' was declared here
202 | libc_freeres_fn (free_mem)
| ^~~~~~~~
./../include/libc-symbols.h:316:15: note: in definition of macro 'libc_freeres_fn'
316 | static void name (void)
| ^~~~
cc1: all warnings being treated as errors
Linux 5.10 has one new syscall, process_madvise. Update
syscall-names.list and regenerate the arch-syscall.h headers with
build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
Otherwise, it will not participate in the dependency sorting.
Fixes commit 9ffa50b26b
("elf: Include libc.so.6 as main program in dependency sort
(bug 20972)").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This patch makes build-many-glibcs.py use the recent GMP 6.2.1
release.
Tested with build-many-glibcs.py (host-libraries, compilers and glibcs
builds).
This symbol is not in the implementation reserved namespace for static
linking and it was never used: it seems it was mistakenly added in the
orignal strlen_asimd commit 436e4d5b96
