/
* sysdeps/unix/sysv/linux/sparc/sparc64/get_clockfreq.c
(set_obp_int): New function.
(get_obp_int): New function.
(__get_clockfreq_via_dev_openprom): Likewise.
* sysdeps/unix/sysv/linux/sparc/sysdep.h (INTERNAL_SYSCALL_ERROR_P): Avoid
unused variable warnings on 'val' and use builtin_expect.
(INLINE_SYSCALL): Don't wrap INTERNAL_SYSCALL_ERROR_P with builtin_expect.
(INLINE_CLONE_SYSCALL): Likewise.
nptl/
* sysdeps/unix/sysv/linux/sparc/sem_post.c (__new_sem_post): Use
atomic_increment and remove unused local variable.
(__old_sem_post): Likewise.
Replace gettimeofday with __vdso_gettimeofday.
* sysdeps/unix/sysv/linux/x86_64/init-first.c (_libc_vdso_platform_setup):
Replace clock_gettime and getcpu with __vdso_clock_gettime and
__vdso_getcpu.
* sysdeps/unix/sysv/linux/x86_64/time.c (time_ifunc): Replace
time with __vdso_time.
* sysdeps/generic/dl-osinfo.h (_dl_setup_stack_chk_guard): Ensure
default stack guard is set in last bytes.
* sysdeps/unix/sysv/linux/dl-osinfo.h (_dl_setup_stack_chk_guard): Same.
* sysdeps/sparc/sparc32/__longjmp.S: Unwind in the 'thread' path
using a normal save/restore sequence, rather than allocating a
dummy stack frame just to store a frame pointer and restore.
* sysdeps/unix/sysv/linux/sparc/sparc32/____longjmp_chk.S: Likewise.
* sysdeps/unix/sparc/sysdep.h (SPARC_PIC_THUNK): New macro.
(SETUP_PIC_REG): Use SPARC_PIC_THUNK and don't save and restore
%o7 across the call.
(SETUP_PIC_REG_LEAF): Do %o7 save/restore in this new macro
instead.
* sysdeps/unix/sysv/linux/sparc/sparc32/sysdep.h: Use
SETUP_PIC_REG_LEAF.
* sysdeps/unix/sysv/linux/sparc/sparc64/sysdep.h: Likewise.
* sysdeps/sparc/crti.S: Use SETUP_PIC_REG.
* sysdeps/sparc/crtn.S: Likewise.
Whenever getaddrinfo needed network interface information it used the
netlink interface to read the information every single time. The
problem is that this information can change at any time.
The patch implements monitoring of the network interfaces through
nscd. If no change is detected the previously read information can
be reused (which is the norm). This timestamp information is also
made available to other processes using the shared memory segment
between nscd and those processes.
nscd can clear caches when certain files change. The list of files
was hardcoded so far and worked for nss_files and nss_dns and those
modules which need no monitoring. nss_db, for instance, has its
own set of files to monitor. Now the NSS modules themselves can
request that certain files are monitored.
fopen should set the FD_CLOEXEC flag if requested evenif the kernel does
not support an aotmic operation.
freopen should reuse the file descriptor for the stream. This is
especially important for calls to change the standard streams (stin,
stdout, stderr).
The getcwd syscall (so far?) can only handle path up to one page
in size. There is no limit about directory hierarchy depth, though,
and the POSIX getcwd is supposed to handle this. In that case fall
back to the generic getcwd.
Additionally, optimize the generic getcwd to use openat when possible
to change the asymptotic performance from O(N^2) to O(n).
This patch tries to organize the implies files for ppc, since there are
a number of processors and most of them are compatible with each other
(backwards compatible).
Having in mind that we start the search for processor-specific files in
the sysdeps/unix/sysv/linux tree
(sysdeps/unix/sysv/linux/powerpc/powerpc[32|64]/[processor]/fpu to be
exact), we would like to grab any linux-specific code from that tree
prior to going through the other tree (sysdeps/powerpc/...).
For that, i removed the Implies files that were originally inside the
fpu directories and placed then in the non-fpu directories (still inside
the unix/sysv/linux tree). If no processor-specific/linux-specific files
could be found, we "imply" the other tree's (sysdeps/powerpc/...) fpu
directory for that specific processor AND also the non-fpu directory for
that same tree.
If, again, no processor-specific code is found, we read another Implies
file that will point to the most compatible processor that we should
grab code from, and so on, until we reach the power4 processor.
So, in summary, the Implies files will live inside these directories
now:
* sysdeps/unix/sysv/linux/powerpc/powerpc[32|64]/[processor]
* sysdeps/powerpc/powerpc[32|64]/[processor]
Practical example of the order we will use to pick power6-specific code
with the new structure.
sysdeps/unix/sysv/linux/powerpc/powerpc[32|64]/power6/fpu ->
sysdeps/unix/sysv/linux/powerpc/powerpc[32|64]/power6 ->
sysdeps/powerpc/powerpc[32|64]/power6/fpu ->
sysdeps/powerpc/powerpc[32|64]/power6 ->
sysdeps/powerpc/powerpc[32|64]/power5+/fpu ->
sysdeps/powerpc/powerpc[32|64]/power5+ ->
sysdeps/powerpc/powerpc[32|64]/power5/fpu ->
sysdeps/powerpc/powerpc[32|64]/power5 ->
sysdeps/powerpc/powerpc[32|64]/power4/fpu ->
sysdeps/powerpc/powerpc[32|64]/power4 (from here, it'll go to the
generic path as usual)
The getdents64 syscall adds on 32-but platforms padding which isn't needed
and not included in the userlevel data structure definition. We have to
avoid copying those padding bytes in the readdir64_r function.
When doing i686-unknown-linux-gnu build configured with --enable-kernel=2.6.24,
there are several warnings like this:
../sysdeps/unix/sysv/linux/i386/fcntl.c:36:12: warning: ‘miss_F_GETOWN_EX’ defined but not used
GCC 4.5 warns about "extern void _end; &end;".
Use char[] instead, as that also doesn't fall foul
of a target's .sdata optimizations.
Signed-off-by: Richard Henderson <rth@twiddle.net>
The old implementation uses fd 0 to determine the login TTY. This
was needed because using /dev/tty it is not possible to deduce the
login TTY. For some time now there is the pseudo-file
/proc/self/loginuid which directly helps us to find the user. Prefer
using this file. It also works if stdin is closed, redirected, or
re-opened.
msgrcv() does not work on sparc64, as it passes the 6th argument using
the ipc kludge, while the kernel waits for a 6 arguments syscall. This
patches fixes the problem by using a sparc64 specific version of
msgrcv.c.
2010-03-03 Aurelien Jarno <aurelien@aurel32.net>
* sysdeps/unix/sysv/linux/sparc/sparc64/msgrcv.c: New file.
grantpt was performing two consecutive calls to stat with the same
file name. Avoid this by creating a special version of the ptsname
function which allows to pass the stat result back to the caller.
The pt_chown program is completely transparently called. It might
not be able to live with the various file descriptors the program
has open at the time of the call (e.g., under SELinux). Close all
but the needed descriptor and connect stdin, stdout, and stderr
with /dev/null. pt_chown shouldn't print anything when called to
do real work.
This is a minor optimization. The tty group mustn't change so a
successful call to getgrnam will always return the same information.
Cache it and reuse it.
The ntp_gettime implementation of NTP exports the tai field the kernel
now produces. This requires an ABI change since the ntptimeval structure
changed. Upstream kept the same name, there is nothing to do. This
patch changes the ntptimeval structure but keeps the old ntp_gettime
definition. A new ntp_gettimex function which is transparently invoked
through the old name is introduced. This has the advantage that even
object files can remain compatible. This wouldn't be the case if
symbol versioning would be used to overload the name ntp_gettime.
I've noticed that sync_file_range is a stub on ppc/ppc64.
The kernel on these arches provides sync_file_range2 syscall with swapped
parameters.
The following completely untested patch ought to fix this.
Due to alignment of 64bit parameters there is a dummy second argument.
But other than that the syscall arguments are directly mapped to the
function arguments.
As reported in http://bugzilla.redhat.com/533063 , preadv/pwritev prototypes
are wrong on 32-bit arches with -D_FILE_OFFSET_BITS=64 and as I've just
found, fallocate is wrong too.
The problem is that only off_t is remapped to the 64-bit type transparently,
__off_t is not.
The implementation of posix_openpt on Linux can fail in a few extra
ways if the appropriate pseudo filesystems are not mounted etc. In
some of these cases we have to explicitly set errno.
If a second call to ttyname is not for the same type of device (e.g.,
serial vs ptty) the prefix of the buffer was wrong. Don't rely on
the previous content, always reinitialize it.
The syscall conventions on some Linux archs prevented F_GETOWN from working
correctly in some situations. This can be rectified when using the new
F_GETOWN_EX command.
tst-longjmp_chk passes, tst-longjmp_chk2 fails but that is because
of some limitations of kernel signal delivery on sparc that I need
to fix, it has nothing to do with the longjmp_chk implementation.
(The problem with tst-longjmp_chk2 is that it tries to do a stack
fault SIGSEGV within a stack fault SIGSEGV , and the Linux kernel
will refuse to setup the signal stack and deliver the signal if the
register windows can't be written out to the stack first)
This patch adds multiarch support when configured for i686. I modified
some x86-64 functions to support 32bit. I will contribute 32bit SSE string
and memory functions later.
We use sigaltstack internally which on some systems is a syscall
and should be used as such. Move the x86-64 version to the Linux
specific directory and create in its place a file which always
causes compile errors.
The terminal output etc is not visible in a core file. The new
libc-internal variable __abort_msg will point to a string with the
message which has been printed before the abort in case abort is
called from inside libc. BZ #10217
Due to a pasto the fallocate64 interface, introduced in glibc 2.10,
isn't exported for 32-bit Linux platforms. It is too late for this
now so exported them for glibc 2.11.
2009-05-06 Ryan S. Arnold <rsa@us.ibm.com>
[BZ #10118]
* Makeconfig (+asflags): New variable based upon ASFLAG or
asflags-cpu.
(ASFLAGS): Add override to set ASFLAGS to +asflags.
* config.make.in (asflags-cpu): Add variable based upon
@libc_cv_cc_submachine@ to propagate -mcpu=CPU from --with-cpu=CPU to
the assembler.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/power6/fpu/setcontext.S:
Remove unneeded file now that the assembler emits _ARCH_PWR6 and
recognizes power6 instruction set due to passing -mcpu=power6 from
--with-cpu=power6 when compiling .S files.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/power6/fpu/swapcontext.S:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/power6/fpu/setcontext.S:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/power6/fpu/swapcontext.S:
Likewise.
from definition.
* sysdeps/x86_64/dl-machine.h (elf_machine_rela): Don't define
label if it is not used.
* elf/dl-profile.c (_dl_start_profile): Define real-type variant
of gmon_hist_hdr and gmon_hdr structures and use them.
* elf/dl-load.c (open_verify): Add temporary variable to avoid
warning.
* nscd/nscd_helper.c (get_mapping): Avoid casts to avoid warnings.
* sunrpc/clnt_raw.c (clntraw_private_s): Use union in definition
to avoid cast.
* inet/rexec.c (rexec_af): Make sa2 a union to avoid warnings.
* inet/rcmd.c (rcmd_af): Make from a union of the various needed types
to avoid warnings.
(iruserok_af): Use ss_family instead of casts.
* gmon/gmon.c (write_hist): Define real-type variant of
gmon_hist_hdr structure and use it.
(write_gmon): Likewise for gmon_hdr.
* sysdeps/unix/sysv/linux/readv.c: Avoid declaration of replacement
function if we are not going to define it.
* sysdeps/unix/sysv/linux/writev.c: Likewise.
* inet/inet6_option.c (optin_alloc): Add temporary variable to
avoid warning.
* libio/strfile.h (struct _IO_streambuf): Use correct type and
name of VTable element.
* libio/iovsprintf.c: Avoid casts to avoid warnings.
* libio/iovsscanf.c: Likewise.
* libio/vasprintf.c: Likewise.
* libio/vsnprintf.c: Likewise.
* stdio-common/isoc99_vsscanf.c: Likewise.
* stdlib/strfmon_l.c: Likewise.
* debug/vasprintf_chk.c: Likewise.
* debug/vsnprintf_chk.c: Likewise.
* debug/vsprintf_chk.c: Likewise.
are always at least 4 bytes in the returned line.
2009-04-15 Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/getsysstats.c (__get_nprocs): Check
__libc_use_alloca (8192), if the stack is too small use 512 bytes
instead of 8K. Stop searching in /proc/stat after hitting first
line not starting with cpu.
(next_line): Truncate too long
lines at buffer size * 3/4 instead of pretending there were line
breaks inside of large lines.
* misc/Versions: Export preadv, preadv64, pwritev, pwritev64 for
GLIBC_2.10.
* misc/sys/uio.h: Declare preadv, preadv64, pwritev, pwritev64.
* sysdeps/unix/sysv/linux/kernel-features.h: Add entries for preadv
and pwritev.
* misc/preadv.c: New file.
* misc/preadv64.c: New file.
* misc/pwritev.c: New file.
* misc/pwritev64.c: New file.
* sysdeps/posx/preadv.c: New file.
* sysdeps/posx/preadv64.c: New file.
* sysdeps/posx/pwritev.c: New file.
* sysdeps/posx/pwritev64.c: New file.
* sysdeps/unix/sysv/linux/preadv.c: New file.
* sysdeps/unix/sysv/linux/preadv64.c: New file.
* sysdeps/unix/sysv/linux/pwritev.c: New file.
* sysdeps/unix/sysv/linux/pwritev64.c: New file.
* sysdeps/unix/sysv/linux/wordsize-64/preadv64.c: New file.
* sysdeps/unix/sysv/linux/wordsize-64/pwritev64.c: New file.
__ASSUME_COMPLETE_READV_WRITEV.
* sysdeps/unix/sysv/linux/readv.c: No need for userlevel fallback
with modern kernels.
* sysdeps/unix/sysv/linux/writev.c: Likewise.
* sysdeps/posix/readv.c: Since read is a cancellation point we have
to free a possible malloced buffer in case of cancellation.
* sysdeps/posix/writev.c: Likewise for write.
c2009-04-01 Ulrich Drepper <drepper@redhat.com>
* sysdeps/unix/sysv/linux/fallocate64.c: New file.
* sysdeps/unix/sysv/linux/wordsize-64/fallocate64.c: New file.
* sysdeps/unix/sysv/linux/wordsize-64/fallocate.c: New file.
* sysdeps/unix/sysv/linux/i386/fallocate64.c: New file.
* sysdeps/unix/sysv/linux/i386/fallocate.c: New file.
* sysdeps/unix/sysv/linux/Versions: Export fallocate and fallocate64
for GLIBC_2.10.
* sysdeps/unix/sysv/linux/Makefile [subdir=io] (sysdep_routines):
Add fallocate and fallocate64.
* io/fcntl.h: Pretty printing.
* wcsmbs/wchar.h: mbsnrtowcs, open_wmemstream, wcpcpy, wcpncpy,
wcscasecmp, wcsdup, wcsncasecmp, wcsnlen, wcsnrtombs,
wcscasecmp_l, wcsncasecmp_l, wcscoll_l, and wcsxfrm_l.
* sysdeps/mach/hurd/bits/posix_opt.h: Reset value of macros from
200112L to 200809L.
* sysdeps/unix/sysv/linux/bits/posix_opt.h: Likewise.
* posix/getconf.c (vars): Add _SC_THREAD_ROBUST_PRIO_INHERIT and
_SC_THREAD_ROBUST_PRIO_PROTECT entries.
* bits/confname.h: Add _SC_THREAD_ROBUST_PRIO_INHERIT and
_SC_THREAD_ROBUST_PRIO_PROTECT.
* posix/unistd.h: fexecve is in POSIX 2008.
* time/time.h: strftime_l is in POSIX 2008.
* io/sys/stat.h: futimens is in POSIX 2008.
* string/strings.h: strcasecmp_l and strncasecmp_l are in POSIX 2008.
* string/string.h: stpcpy, stpncpy, strndup, strnlen, strsignal,
strcoll_l, strerror_l, and strxfrm_l are in POSIX 2008.
* stdlib/stdlib.h: mkdtemp is in POSIX 2008.
* sysdeps/unix/sysv/linux/bits/stat.h: Protect UTIME_NOW and
UTIME_OMIT only with __USE_ATFILE.
* sysdeps/unix/sysv/linux/ia64/bits/stat.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/stat.h: Likewise.
* sysdeps/unix/sysv/linux/s390/bits/stat.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/stat.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/bits/stat.h: Likewise.
* io/sys/stat.h: Move mknodat definition into same conditional as
mknod.
* time/sys/time.h: futimesat is not among the functions accepted
into the POSIX standard.
