GCC 9 dropped support for the SPE extensions to PowerPC, which means
powerpc*-*-*gnuspe* configurations are no longer buildable with that
compiler. This ISA extension was peculiar to the “e500” line of
embedded PowerPC chips, which, as far as I can tell, are no longer
being manufactured, so I think we should follow suit.
This patch was developed by grepping for “e500”, “__SPE__”, and
“__NO_FPRS__”, and may not eliminate every vestige of SPE support.
Most uses of __NO_FPRS__ are left alone, as they are relevant to
normal embedded PowerPC with soft-float.
* sysdeps/powerpc/preconfigure: Error out on powerpc-*-*gnuspe*
host type.
* scripts/build-many-glibcs.py: Remove powerpc-*-linux-gnuspe
and powerpc-*-linux-gnuspe-e500v1 from list of build configurations.
* sysdeps/powerpc/powerpc32/e500: Recursively delete.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/e500: Recursively delete.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/context-e500.h:
Delete.
* sysdeps/powerpc/fpu_control.h: Remove SPE variant.
Issue an #error if used with a compiler in SPE-float mode.
* sysdeps/powerpc/powerpc32/__longjmp_common.S
* sysdeps/powerpc/powerpc32/setjmp_common.S
* sysdeps/unix/sysv/linux/powerpc/powerpc32/getcontext-common.S
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/getcontext.S
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/setcontext.S
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/swapcontext.S
* sysdeps/unix/sysv/linux/powerpc/powerpc32/setcontext-common.S
* sysdeps/unix/sysv/linux/powerpc/powerpc32/swapcontext-common.S:
Remove code to preserve SPE register state.
* sysdeps/unix/sysv/linux/powerpc/elision-lock.c
* sysdeps/unix/sysv/linux/powerpc/elision-trylock.c
* sysdeps/unix/sysv/linux/powerpc/elision-unlock.c
Remove __SPE__ ifndefs.
Improve string benchtest timing. Many tests run for 0.01s which is way too
short to give accurate results. Other tests take over 40 seconds which is
way too long. Significantly increase the iterations of the short running
tests. Reduce number of alignment variations in the long running memcpy walk
tests so they take less than 5 seconds.
As a result most tests take at least 0.1s and all finish within 5 seconds.
* benchtests/bench-memcpy-random.c (do_one_test): Use medium iterations.
* benchtests/bench-memcpy-walk.c (test_main): Reduce alignment tests.
* benchtests/bench-memmem.c (do_one_test): Use small iterations.
* benchtests/bench-memmove-walk.c (test_main): Reduce alignment tests.
* benchtests/bench-memset-walk.c (test_main): Reduce alignment tests.
* benchtests/bench-strcasestr.c (do_one_test): Use small iterations.
* benchtests/bench-string.h (INNER_LOOP_ITERS): Increase iterations.
(INNER_LOOP_ITERS_MEDIUM): New define.
(INNER_LOOP_ITERS_SMALL): New define.
* benchtests/bench-strpbrk.c (do_one_test): Use medium iterations.
* benchtests/bench-strsep.c (do_one_test): Use small iterations.
* benchtests/bench-strspn.c (do_one_test): Use medium iterations.
* benchtests/bench-strstr.c (do_one_test): Use small iterations.
* benchtests/bench-strtok.c (do_one_test): Use small iterations.
This patch add the missing SEMTIMEDOP_IPC_ARGS definions on powerpc
and sparc ipc_priv.h.
Checked on powerpc64le-linux-gnu and with a build for sparc64-linux-gnu.
* sysdeps/unix/sysv/linux/powerpc/ipc_priv.h (SEMTIMEDOP_IPC_ARGS):
New define.
* sysdeps/unix/sysv/linux/sparc/sparc64/ipc_priv.h
(SEMTIMEDOP_IPC_ARGS): Likewise.
struct gconv_fcts for the C locale is statically allocated,
and __gconv_close_transform deallocates the steps object.
Therefore this commit introduces __wcsmbs_close_conv to avoid
freeing the statically allocated steps objects.
The codecvt vtable is not a real vtable because it also contains the
conversion state data. Furthermore, wide stream support was added to
GCC 3.0, after a C++ ABI bump, so there is no compatibility
requirement with libstdc++.
This change removes several unmangled function pointers which could
be used with a corrupted FILE object to redirect execution. (libio
vtable verification did not cover the codecvt vtable.)
Reviewed-by: Yann Droneaud <ydroneaud@opteya.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The original implementations of test_timespec_before_impl and
test_timespec_equal_or_after in 5198399651
were missing the backslash required for a newline.
Checked on x86_64-linux-gnu.
* support/timespec.c: Add backslash to correct newline in failure
message.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch consolidates the s390-32 semtimedop implementation by defining
a arch-specific SEMTIMEDOP_IPC_ARGS to rearrange the arguments expected
by s390 Linux kABI. The idea is to avoid have multiples semtimedop
implementation changes for Linux v5.1 change to enable wire-up sysvipc
support.
Checked with a s390-linux-gnu and s390x-linux-gnu and checking that
resulting semtimedop objects did not change.
* sysdeps/unix/sysv/linux/ipc_priv.h (SEMTIMEDOP_IPC_ARGS): New
define.
* sysdpes/unix/sysv/linux/s390/ipc_priv.h: New file.
* sysdeps/unix/sysv/linux/s390/semtimedop.c: Remove file.
* sysdeps/unix/sysv/linux/semtimedop.c (semtimedop): Use
SEMTIMEDOP_IPC_ARGS for calls with __NR_ipc.
The __IPC64 flags is meant to be used to enable the new sysv struct
format when the architectures supports it (ARCH_WANT_IPC_PARSE_VERSION
config flag on Linux kernel).
This currently issue only affects alpha.
[BZ #24570]
* sysdeps/unix/sysv/linux/msgctl.c (__old_msgctl): Remove __IPC_64
usage.
This patch adds the new NT_ARM_PACA_KEYS and NT_ARM_PACG_KEYS from
Linux 5.1 to glibc's elf.h.
Tested for x86_64.
* elf/elf.h (NT_ARM_PACA_KEYS): New macro.
(NT_ARM_PACG_KEYS): Likewise.
Change the tcache->counts[] entries to uint16_t - this removes
the limit set by char and allows a larger tcache. Remove a few
redundant asserts.
bench-malloc-thread with 4 threads is ~15% faster on Cortex-A72.
Reviewed-by: DJ Delorie <dj@redhat.com>
* malloc/malloc.c (MAX_TCACHE_COUNT): Increase to UINT16_MAX.
(tcache_put): Remove redundant assert.
(tcache_get): Remove redundant asserts.
(__libc_malloc): Check tcache count is not zero.
* manual/tunables.texi (glibc.malloc.tcache_count): Update maximum.
Linux 5.1 adds missing syscalls to the syscall table for many Linux
kernel architectures. This patch updates the kernel-features.h
headers accordingly. __ASSUME_DIRECT_SYSVIPC_SYSCALLS is not updated
because of the differences between new and old syscalls described in
<https://sourceware.org/ml/libc-alpha/2019-05/msg00235.html>. The
statfs64 structure used by alpha matches what the new kernel syscalls
use.
Tested with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/alpha/kernel-features.h
(__ASSUME_STATFS64): Only undefine if [__LINUX_KERNEL_VERSION <
0x050100].
* sysdeps/unix/sysv/linux/ia64/kernel-features.h (__ASSUME_STATX):
Likewise.
* sysdeps/unix/sysv/linux/sh/kernel-features.h
(__ASSUME_STATX): Likewise.
Provide an explicit diagnostic if the length is positive, and
do not just crash with a null pointer dereference. Null pointers
are only valid if the length is zero, so this can only happen with
a faulty test.
dlerror.c (__dlerror_main_freeres) will try to free resources which only
have been initialized when init () has been called. That function is
called when resources are needed using __libc_once (once, init) where
once is a __libc_once_define (static, once) in the dlerror.c file.
Trying to free those resources if init () hasn't been called will
produce errors under valgrind memcheck. So guard the freeing of those
resources using __libc_once_get (once) and make sure we have a valid
key. Also add a similar guard to __dlerror ().
* dlfcn/dlerror.c (__dlerror_main_freeres): Guard using
__libc_once_get (once) and static_bug == NULL.
(__dlerror): Check we have a valid key, set result to static_buf
otherwise.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
When computing the length of the converted part of the stdio buffer, use
the number of consumed wide characters, not the (negative) distance to the
end of the wide buffer.
The function uses the internal service_user type, so it is not
really usable from the outside of glibc. Rename the function
to __nss_database_lookup2 for internal use, and change
__nss_database_lookup to always indicate failure to the caller.
__nss_next already was a compatibility symbol. The new
implementation always fails and no longer calls __nss_next2.
unscd, the alternative nscd implementation, does not use
__nss_database_lookup, so it is not affected by this change.
Commit ba7b4d294b ("Complete the
removal of __gconv_translit_find") added a declaration of the
GLIBC_PRIVATE function, __gconv_transliterate, to the installed
header <gconv.h>. It should have been added to the internal
<gconv_int.h> header.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The tgkill function is sometimes used in crash handlers.
<bits/signal_ext.h> follows the same approach as <bits/unistd_ext.h>
(which was added for the gettid system call wrapper).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Use a new libsupport support_bindir_prefix instead of a hardcoded
/usr/bin to create the pldd path on container directory.
Checked on x86_64-linux-gnu with default and non-default --prefix and
--bindir paths, as well with --enable-hardcoded-path-in-tests.
[BZ #24544]
* elf/tst-pldd.c (do_test): Use support_bindir_prefix instead of
pre-defined value.
Reviewed-by: DJ Delorie <dj@redhat.com>
This allows sets a path using --bindir. Checked on x86_64-linux-gnu
with a non-default --bindir and checked resulting installed binaries
(pldd for instance).
* config.make.in (bindir): New variable.
Reviewed-by: DJ Delorie <dj@redhat.com>
This patch removes the arch-specific x86 assembly implementation for
low level locking and consolidate both 64 bits and 32 bits in a
single implementation.
Different than other architectures, x86 lll_trylock, lll_lock, and
lll_unlock implements a single-thread optimization to avoid atomic
operation, using cmpxchgl instead. This patch implements by using
the new single-thread.h definitions in a generic way, although using
the previous semantic.
The lll_cond_trylock, lll_cond_lock, and lll_timedlock just use
atomic operations plus calls to lll_lock_wait*.
For __lll_lock_wait_private and __lll_lock_wait the generic implemtation
there is no indication that assembly implementation is required
performance-wise.
Checked on x86_64-linux-gnu and i686-linux-gnu.
* sysdeps/nptl/lowlevellock.h (__lll_trylock): New macro.
(lll_trylock): Call __lll_trylock.
* sysdeps/unix/sysv/linux/i386/libc-lowlevellock.S: Remove file.
* sysdeps/unix/sysv/linux/i386/lll_timedlock_wait.c: Likewise.
* sysdeps/unix/sysv/linux/i386/lowlevellock.S: Likewise.
* sysdeps/unix/sysv/linux/i386/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/libc-lowlevellock.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/lll_timedlock_wait.c: Likewise.
* sysdeps/unix/sysv/linux/x86_64/lowlevellock.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/x86/lowlevellock.h: New file.
* sysdeps/unix/sysv/linux/x86_64/cancellation.S: Include
lowlevellock-futex.h.
Since hppa is not an outlier anymore regarding LLL_LOCK_INITIALIZER value,
we can now assume it 0 for all architectures.
Checked on a build for all major ABIs.
* nptl/nptl-init.c (__pthread_initialize_minimal_internal): Remove
initialization for LLL_LOCK_INITIALIZER different than 0.
* nptl/old_pthread_cond_broadcast.c (__pthread_cond_broadcast_2_0):
Assume LLL_LOCK_INITIALIZER being 0.
* nptl/old_pthread_cond_signal.c (__pthread_cond_signal_2_0): Likewise.
* nptl/old_pthread_cond_timedwait.c (__pthread_cond_timedwait_2_0):
Likewise.
* nptl/old_pthread_cond_wait.c (__pthread_cond_wait_2_0): Likewise.
* sysdeps/nptl/libc-lockP.h (__libc_lock_define_initialized): Likewise.
This patch move the single-thread syscall optimization defintions from
syscall-cancel.h to new header file single-thread.h and also move the
cancellation definitions from pthreadP.h to syscall-cancel.h.
The idea is just simplify the inclusion of both syscall-cancel.h and
single-thread.h (without the requirement of including all pthreadP.h
defintions).
No semantic changes expected, checked on a build for all major ABIs.
* nptl/pthreadP.h (CANCEL_ASYNC, CANCEL_RESET, LIBC_CANCEL_ASYNC,
LIBC_CANCEL_RESET, __libc_enable_asynccancel,
__libc_disable_asynccancel, __librt_enable_asynccancel,
__libc_disable_asynccancel, __librt_enable_asynccancel,
__librt_disable_asynccancel): Move to ...
* sysdeps/unix/sysv/linux/sysdep-cancel.h: ... here.
(SINGLE_THREAD_P, RTLD_SINGLE_THREAD_P): Move to ...
* sysdeps/unix/sysv/linux/single-thread.h: ... here.
* sysdeps/generic/single-thread.h: New file.
* sysdeps/unix/sysdep.h: Include single-thread.h.
* sysdeps/unix/sysv/linux/futex-internal.h: Include sysdep-cancel.h.
* sysdeps/unix/sysv/linux/lowlevellock-futex.h: Likewise.
Unicode 12.1.0 Support: Character encoding, character type info, and
transliteration tables are all updated to Unicode 12.1.0, using
the generator scripts contributed by Mike FABIAN (Red Hat).
Some info about the number of characters added or changed:
Total added characters in newly generated CHARMAP: 1
added: <U32FF> /xe3/x8b/xbf SQUARE ERA NAME REIWA
Total added characters in newly generated WIDTH: 1
added: <U32FF> 2 : eaw=W category=So bidi=L name=SQUARE ERA NAME REIWA
graph: Added 1 characters in new ctype which were not in old ctype
graph: Added: ㋿ U+32FF SQUARE ERA NAME REIWA
print: Added 1 characters in new ctype which were not in old ctype
print: Added: ㋿ U+32FF SQUARE ERA NAME REIWA
punct: Added 1 characters in new ctype which were not in old ctype
punct: Added: ㋿ U+32FF SQUARE ERA NAME REIWA
The tcache counts[] array is a char, which has a very small range and thus
may overflow. When setting tcache_count tunable, there is no overflow check.
However the tunable must not be larger than the maximum value of the tcache
counts[] array, otherwise it can overflow when filling the tcache.
[BZ #24531]
* malloc/malloc.c (MAX_TCACHE_COUNT): New define.
(do_set_tcache_count): Only update if count is small enough.
* manual/tunables.texi (glibc.malloc.tcache_count): Document max value.
The patch print timespec members as intmax_t instead of long int.
It avoid the -Werror=format= build issue on x32:
timespec.c: In function 'test_timespec_before_impl':
timespec.c:32:23: error: format '%ld' expects argument of type 'long int',
but argument 4 has type '__time_t' {aka 'const long long int'} [-Werror=format=]
Checked on x86_64-linux-gnu-x32, x86_64-linux-gnu, and i686-linux-gnu.
* support/timespec.c (test_timespec_before_impl,
test_timespec_equal_or_after_impl): print timespec member as intmax_t
insted of long int.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Checked on x86_64-linux-gnu and i686-linux-gnu.
* nptl/tst-rwlock6.c: Use libsupport. This also happens to fix a
small bug where only tv.tv_usec was checked which could cause an
erroneous pass if pthread_rwlock_timedrdlock incorrectly took more
than a second.
* nptl/tst-rwlock7.c, nptl/tst-rwlock9.c, nptl/tst-rwlock14.c: Use
libsupport.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Checked on x86_64-linux-gnu and i686-linux-gnu.
* nptl/tst-sem5.c(do_test): Use xclock_gettime, timespec_add and
TEST_TIMESPEC_NOW_OR_AFTER from libsupport.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
It adds useful functions for tests that use struct timespec.
Checked on x86_64-linux-gnu and i686-linux-gnu.
* support/timespec.h: New file. Provide timespec helper functions
along with macros in the style of those in check.h.
* support/timespec.c: New file. Implement check functions declared
in support/timespec.h.
* support/timespec-add.c: New file from gnulib containing
timespec_add implementation that handles overflow.
* support/timespec-sub.c: New file from gnulib containing
timespec_sub implementation that handles overflow.
* support/README: Mention timespec.h.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Don't run nptl/tst-eintr1 by normal make check because it can spuriously
break testing on various linux kernels. (Currently this affects the
aarch64 glibc buildbot machine which regularly fails and loses test
results.)
[BZ #24537]
* nptl/Makefile: Move tst-eintr1 to xtests.
This patches consolidates all the powerpc trunc{f} implementations on
the generic sysdeps/powerpc/fpu/s_trunc{f}. The generic implementation
uses either the compiler builts for ISA 2.03+ (which generates the
frim instruction) or a generic implementation which uses FP only
operations.
The IFUNC organization for powerpc64 is also change to be enabled only
for powerpc64 and not for powerpc64le (since minium ISA of 2.08 does not
require the fallback generic implementation).
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/fpu/trunc_to_integer.h (set_fenv_mode): Add
TRUNC handling.
(round_mode): Add definition for TRUNC.
* sysdeps/powerpc/fpu/s_trunc.c: New file.
* sysdeps/powerpc/fpu/s_truncf.c: New file.
* sysdeps/powerpc/powerpc32/fpu/s_trunc.S: Remove file.
* sysdeps/powerpc/powerpc32/fpu/s_truncf.S: Likewise.
* sysdep/powerpc/powepc32/power4/fpu/multiarch/s_trunc-power5+.S:
Likewise.
* sysdep/powerpc/powepc32/power4/fpu/multiarch/s_trunc-ppc32.S:
Likewise.
* sysdep/powerpc/powepc32/power4/fpu/multiarch/s_truncf-power5+.S:
Likewise.
* sysdep/powerpc/powepc32/power4/fpu/multiarch/s_truncf-ppc32.S:
Likewise.
* sysdep/powerpc/powepc32/power4/fpu/multiarch/s_trunc-power5+.c: New
file.
* sysdep/powerpc/powepc32/power4/fpu/multiarch/s_trunc-ppc32.c:
Likewise.
* sysdep/powerpc/powepc32/power4/fpu/multiarch/s_truncf-power5+.c:
Likewise.
* sysdep/powerpc/powepc32/power4/fpu/multiarch/s_truncf-ppc32.c:
Likewise.
* sysdep/powerpc/powerpc32/power5+/fpu/s_trunc.S: Remove file.
* sysdep/powerpc/powerpc32/power5+/fpu/s_truncf.S: Likewise.
* sysdep/powerpc/powerpc64/be/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_trunc-power5+, s_trunc-ppc64,
s_truncf-power5+, and s_truncf-ppc64.
(CFLAGS-s_trunc-power5+.c, CFLAGS-s_truncf-power5+.c): New rule.
* sysdep/powerpc/powercp64/be/fpu/multiarch/s_trunc-power5+.c: New
file.
* sysdep/powerpc/powercp64/be/fpu/multiarch/s_trunc-ppc64.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_trunc.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_trunc.c: ... here.
* sysdep/powerpc/powercp64/be/fpu/multiarch/s_truncf-power5+.c: New
file.
* sysdep/powerpc/powercp64/be/fpu/multiarch/s_truncf-ppc64.c:
Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_truncf.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_truncf.c: ... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile
(libm-sysdep_routines): Remove s_trunc-power5+, s_trunc-ppc64,
s_truncf-power5+, and s_truncf-ppc64.
* sysdep/powerpc/powerpc64/fpu/multiarch/s_trunc-power5+.S: Remove
file.
* sysdep/powerpc/powerpc64/fpu/multiarch/s_trunc-ppc64.S: Likewise.
* sysdep/powerpc/powerpc64/fpu/multiarch/s_truncf-power5+.S:
Likewise.
* sysdep/powerpc/powerpc64/fpu/multiarch/s_truncf-ppc64.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_trunc.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_truncf.S: Likewise.
* sysdep/powerpc/powerpc64/power5+/fpu/s_trunc.S: Likewise.
* sysdep/powerpc/powerpc64/power5+/fpu/s_truncf.S: Likewise.
Reviewed-by: Gabriel F. T. Gomes <gabriel@inconstante.eti.br>
This patches consolidates all the powerpc round{f} implementations on
the generic sysdeps/powerpc/fpu/s_round{f}. The generic implementation
uses either the compiler builts for ISA 2.03+ (which generates the
frim instruction) or a generic implementation which uses FP only
operations.
The IFUNC organization for powerpc64 is also change to be enabled only
for powerpc64 and not for powerpc64le (since minium ISA of 2.08 does not
require the fallback generic implementation).
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/fpu/round_to_integer.h (set_fenv_mode): Add
ROUND handling.
(round_mode): Add definition for ROUND.
(round_to_integer_float): Likewise.
* sysdeps/powerpc/fpu/s_round.c: New file.
* sysdeps/powerpc/fpu/s_roundf.c: New file.
* sysdeps/powerpc/powerpc32/fpu/s_round.S: Remove file.
* sysdeps/powerpc/powerpc32/fpu/s_roundf.S: Likewise.
* sysdep/powerpc/powepc32/power4/fpu/multiarch/s_round-power5+.S:
Likewise.
* sysdep/powerpc/powepc32/power4/fpu/multiarch/s_round-ppc32.S:
Likewise.
* sysdep/powerpc/powepc32/power4/fpu/multiarch/s_roundf-power5+.S:
Likewise.
* sysdep/powerpc/powepc32/power4/fpu/multiarch/s_roundf-ppc32.S:
Likewise.
* sysdep/powerpc/powepc32/power4/fpu/multiarch/s_round-power5+.c: New
file.
* sysdep/powerpc/powepc32/power4/fpu/multiarch/s_round-ppc32.c:
Likewise.
* sysdep/powerpc/powepc32/power4/fpu/multiarch/s_roundf-power5+.c:
Likewise.
* sysdep/powerpc/powepc32/power4/fpu/multiarch/s_roundf-ppc32.c:
Likewise.
* sysdep/powerpc/powerpc32/power5+/fpu/s_round.S: Remove file.
* sysdep/powerpc/powerpc32/power5+/fpu/s_roundf.S: Likewise.
* sysdep/powerpc/powerpc64/be/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_round-power5+, s_round-ppc64,
s_roundf-power5+, and s_roundf-ppc64.
(CFLAGS-s_round-power5+.c, CFLAGS-s_roundf-power5+.c): New rule.
* sysdep/powerpc/powercp64/be/fpu/multiarch/s_round-power5+.c: New
file.
* sysdep/powerpc/powercp64/be/fpu/multiarch/s_round-ppc64.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_round.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_round.c: ... here.
* sysdep/powerpc/powercp64/be/fpu/multiarch/s_roundf-power5+.c: New
file.
* sysdep/powerpc/powercp64/be/fpu/multiarch/s_roundf-ppc64.c:
Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_roundf.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_roundf.c: ... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile
(libm-sysdep_routines): Remove s_round-power5+, s_round-ppc64,
s_roundf-power5+, and s_roundf-ppc64.
* sysdep/powerpc/powerpc64/fpu/multiarch/s_round-power5+.S: Remove
file.
* sysdep/powerpc/powerpc64/fpu/multiarch/s_round-ppc64.S: Likewise.
* sysdep/powerpc/powerpc64/fpu/multiarch/s_roundf-power5+.S:
Likewise.
* sysdep/powerpc/powerpc64/fpu/multiarch/s_roundf-ppc64.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_round.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_roundf.S: Likewise.
* sysdep/powerpc/powerpc64/power5+/fpu/s_round.S: Likewise.
* sysdep/powerpc/powerpc64/power5+/fpu/s_roundf.S: Likewise.
Reviewed-by: Gabriel F. T. Gomes <gabriel@inconstante.eti.br>
This patches consolidates all the powerpc floor{f} implementations on
the generic sysdeps/powerpc/fpu/s_floor{f}. The generic implementation
uses either the compiler builts for ISA 2.03+ (which generates the
frim instruction) or a generic implementation which uses FP only
operations.
The IFUNC organization for powerpc64 is also change to be enabled only
for powerpc64 and not for powerpc64le (since minium ISA of 2.08 does not
require the fallback generic implementation).
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/fpu/round_to_integer.h (set_fenv_mode):
Add FLOOR option.
(round_mode): Add definition for FLOOR.
* sysdeps/powerpc/fpu/s_floor.c: New file.
* sysdeps/powerpc/fpu/s_floorf.c: Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_floor.S: Remove file.
* sysdeps/powerpc/powerpc32/fpu/s_floorf.S: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_floor-power5+.S:
Remove file.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_floor-ppc32.S:
Likewise
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_floorf-power5+.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_floorf-ppc32.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_floor-power5+.c:
New file.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_floor-ppc32.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_floorf-power5+.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_floorf-ppc32.c:
Likewise.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_floor.S: Remove file.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_floorf.S: Remove file.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_floor-power5+, s_floor-ppc64,
s_floorf-power5+, and s_floorf-ppc64.
(CFLAGS-s_floor-power5+.c, CFLAGS-s_floorf-power5+.c): New rule.
* sysdep/powerpc/powerpc64/be/fpu/multiarch/s_floor-power5+.c: New
file.
* sysdep/powerpc/powerpc64/be/fpu/multiarch/s_floor-ppc64.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_floor.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_floor.c: ... here.
* sysdep/powerpc/powerpc64/be/fpu/multiarch/s_floorf-power5+.c: New
file.
* sysdep/powerpc/powerpc64/be/fpu/multiarch/s_floorf-ppc64.c:
Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_floorf.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_floorf.c: ... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile
(libm-sysdep_routines): Remove s_floor-power5+, s_floor-ppc64,
s_floorf-power5+, and s_floorf-ppc64.
* sysdep/powerpc/powerpc64/fpu/multiarch/s_floor-power5+.S: Remove
file.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_floor-ppc64.S: Remove
file.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_floorf-power5+.S:
Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_floorf-ppc64.S:
Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_floor.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_floorf.S: Likewise.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_floor.S: Likewise.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_floorf.S: Likewise.
Reviewed-by: Gabriel F. T. Gomes <gabriel@inconstante.eti.br>
* support/xclock_gettime.c (xclock_gettime): New file. Provide
clock_gettime wrapper for use in tests that fails the test rather
than returning failure.
* support/xtime.h: New file to declare xclock_gettime.
* support/Makefile: Add xclock_gettime.c.
* support/README: Mention xtime.h.
This synchronization method has a lower overhead and makes
it more likely that the signal arrives during one of the critical
functions.
Also test for fork deadlocks explicitly.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
This patch updates syscall-names.list for Linux 5.1 (which has many
new syscalls, mainly but not entirely ones for 64-bit time).
Tested with build-many-glibcs.py (before the revert of the move to
Linux 5.1 there; verified there were no tst-syscall-list failures).
* sysdeps/unix/sysv/linux/syscall-names.list: Update kernel
version to 5.1.
(clock_adjtime64) New syscall.
(clock_getres_time64) Likewise.
(clock_gettime64) Likewise.
(clock_nanosleep_time64) Likewise.
(clock_settime64) Likewise.
(futex_time64) Likewise.
(io_pgetevents_time64) Likewise.
(io_uring_enter) Likewise.
(io_uring_register) Likewise.
(io_uring_setup) Likewise.
(mq_timedreceive_time64) Likewise.
(mq_timedsend_time64) Likewise.
(pidfd_send_signal) Likewise.
(ppoll_time64) Likewise.
(pselect6_time64) Likewise.
(recvmmsg_time64) Likewise.
(rt_sigtimedwait_time64) Likewise.
(sched_rr_get_interval_time64) Likewise.
(semtimedop_time64) Likewise.
(timer_gettime64) Likewise.
(timer_settime64) Likewise.
(timerfd_gettime64) Likewise.
(timerfd_settime64) Likewise.
(utimensat_time64) Likewise.
