The ldbl-96 implementation of scalblnl (used for x86_64 and ia64) uses
a condition k <= -63 to determine when a standard underflowing result
tiny*__copysignl(tiny,x) should be returned. However, that condition
corresponds to values with exponent -16446 or less, and in the case of
-16446, the correct result for round-to-nearest depends on whether the
value is exactly 0x1p-16446 (half the least subnormal) or more than
that. This patch fixes the bug by changing the condition to k <= -64
and accordingly adjusting the exponent by 64 not 63 when converting to
a normal value.
Tested for x86_64.
[BZ #17803]
* sysdeps/ieee754/ldbl-96/s_scalblnl.c (twom63): Rename to
twom64. Adjust value to 0x1p-64L.
(__scalblnl): Only return standard underflowing result for K <=
-64 not K <= -63; adjust exponent for underflowing result by 64
not 63.
* math/libm-test.inc (scalbn_test_data): Add more tests.
(scalbln_test_data): Likewise.
The ldbl-96 implementation of scalblnl (used for x86_64 and ia64) is
incorrect for subnormal arguments (this is a separate bug from bug
17803, which is about underflowing results). There are two problems
with the adjustments of subnormal arguments: the "two63" variable
multiplied by is actually 0x1p52L not 0x1p63L, so is insufficient to
make values normal, and then GET_LDOUBLE_EXP(es,x), used to extract
the new exponent, extracts it into a variable that isn't used, while
the value taken to by the new exponent is wrongly taken from the high
part of the mantissa before the adjustment (hx). This patch fixes
both those problems and adds appropriate tests.
Tested for x86_64.
[BZ #17834]
* sysdeps/ieee754/ldbl-96/s_scalblnl.c (two63): Change value to
0x1p63L.
(__scalblnl): Get new exponent of adjusted subnormal value from ES
not HX.
* math/libm-test.inc (scalbn_test_data): Add more tests.
(scalbln_test_data): Likewise.
Concluding the fixes for C90 libm functions calling C99 fe* functions,
this patch fixes the case of feupdateenv by making it a weak alias for
__feupdateenv and making the affected code call __feupdateenv.
Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by the patch). Also tested for ARM
(soft-float) that the math.h linknamespace tests now pass.
[BZ #17748]
* include/fenv.h (__feupdateenv): Use libm_hidden_proto.
* math/feupdateenv.c (__feupdateenv): Use libm_hidden_def.
* sysdeps/aarch64/fpu/feupdateenv.c (feupdateenv): Rename to
__feupdateenv and define as weak alias of __feupdateenv. Use
libm_hidden_weak.
* sysdeps/alpha/fpu/feupdateenv.c (__feupdateenv): Use
libm_hidden_def.
* sysdeps/arm/feupdateenv.c (feupdateenv): Rename to __feupdateenv
and define as weak alias of __feupdateenv. Use libm_hidden_weak.
* sysdeps/hppa/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/i386/fpu/feupdateenv.c (__feupdateenv): Use
libm_hidden_def.
* sysdeps/ia64/fpu/feupdateenv.c (feupdateenv): Rename to
__feupdateenv and define as weak alias of __feupdateenv. Use
libm_hidden_weak.
* sysdeps/m68k/fpu/feupdateenv.c (__feupdateenv): Use
libm_hidden_def.
* sysdeps/mips/fpu/feupdateenv.c (feupdateenv): Rename to
__feupdateenv and define as weak alias of __feupdateenv. Use
libm_hidden_weak.
* sysdeps/powerpc/fpu/feupdateenv.c (__feupdateenv): Use
libm_hidden_def.
* sysdeps/powerpc/nofpu/feupdateenv.c (__feupdateenv): Likewise.
* sysdeps/powerpc/powerpc32/e500/nofpu/feupdateenv.c
(__feupdateenv): Likewise.
* sysdeps/s390/fpu/feupdateenv.c (feupdateenv): Rename to
__feupdateenv and define as weak alias of __feupdateenv. Use
libm_hidden_weak.
* sysdeps/sh/sh4/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/sparc/fpu/feupdateenv.c (__feupdateenv): Use
libm_hidden_def.
* sysdeps/tile/math_private.h (__feupdateenv): New inline
function.
* sysdeps/x86_64/fpu/feupdateenv.c (__feupdateenv): Use
libm_hidden_def.
* sysdeps/generic/math_private.h (default_libc_feupdateenv): Call
__feupdateenv instead of feupdateenv.
(default_libc_feupdateenv_test): Likewise.
(libc_feresetround_ctx): Likewise.
Continuing the fixes for C90 libm functions calling C99 fe* functions,
this patch fixes the case of fesetround by making it a weak alias of
__fesetround and making the affected code call __fesetround. An
existing __fesetround function in fenv_libc.h for powerpc is renamed
to __fesetround_inline.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by the patch). Also tested for ARM
(soft-float) that fesetround failures disappear from the linknamespace
test results (feupdateenv remains to be addressed to complete fixing
bug 17748).
[BZ #17748]
* include/fenv.h (__fesetround): Declare. Use libm_hidden_proto.
* math/fesetround.c (fesetround): Rename to __fesetround and
define as weak alias of __fesetround. Use libm_hidden_weak.
* sysdeps/aarch64/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/alpha/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/arm/fesetround.c (fesetround): Likewise.
* sysdeps/hppa/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/i386/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/ia64/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/m68k/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/mips/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/powerpc/fpu/fenv_libc.h (__fesetround): Rename to
__fesetround_inline.
* sysdeps/powerpc/fpu/fenv_private.h (libc_fesetround_ppc): Call
__fesetround_inline instead of __fesetround.
* sysdeps/powerpc/fpu/fesetround.c (fesetround): Rename to
__fesetround and define as weak alias of __fesetround. Use
libm_hidden_weak. Call __fesetround_inline instead of
__fesetround.
* sysdeps/powerpc/nofpu/fesetround.c (fesetround): Rename to
__fesetround and define as weak alias of __fesetround. Use
libm_hidden_weak.
* sysdeps/powerpc/powerpc32/e500/nofpu/fesetround.c (fesetround):
Likewise.
* sysdeps/s390/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/sh/sh4/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/sparc/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/tile/math_private.h (__fesetround): New inline function.
* sysdeps/x86_64/fpu/fesetround.c (fesetround): Rename to
__fesetround and define as weak alias of __fesetround. Use
libm_hidden_weak.
* sysdeps/generic/math_private.h (default_libc_fesetround): Call
__fesetround instead of fesetround.
(default_libc_feholdexcept_setround): Likewise.
(libc_feholdsetround_ctx): Likewise.
(libc_feholdsetround_noex_ctx): Likewise.
Continuing the fixes for C90 libm functions calling C99 fe* functions,
this patch fixes the case of fesetenv by making it a weak alias of
__fesetenv and making the affected code (including various copies of
feupdateenv which also gets called from C90 functions) call
__fesetenv.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by the patch). Also tested for ARM
(soft-float) that fesetenv failures disappear from the linknamespace
test results (fsetround and feupdateenv remain to be addressed to
complete fixing bug 17748).
[BZ #17748]
* include/fenv.h (__fesetenv): Use libm_hidden_proto.
* math/fesetenv.c (__fesetenv): Use libm_hidden_def.
* sysdeps/aarch64/fpu/fesetenv.c (fesetenv): Rename to __fesetenv
and define as weak alias of __fesetenv. Use libm_hidden_weak.
* sysdeps/alpha/fpu/fesetenv.c (__fesetenv): Use libm_hidden_def.
* sysdeps/arm/fesetenv.c (fesetenv): Rename to __fesetenv and
define as weak alias of __fesetenv. Use libm_hidden_weak.
* sysdeps/hppa/fpu/fesetenv.c (fesetenv): Likewise.
* sysdeps/i386/fpu/fesetenv.c (__fesetenv): Use libm_hidden_def.
* sysdeps/ia64/fpu/fesetenv.c (fesetenv): Rename to __fesetenv and
define as weak alias of __fesetenv. Use libm_hidden_weak.
* sysdeps/m68k/fpu/fesetenv.c (__fesetenv): Use libm_hidden_def.
* sysdeps/mips/fpu/fesetenv.c (fesetenv): Rename to __fesetenv and
define as weak alias of __fesetenv. Use libm_hidden_weak.
* sysdeps/powerpc/fpu/fesetenv.c (__fesetenv): Use
libm_hidden_def.
* sysdeps/powerpc/nofpu/fesetenv.c (__fesetenv): Likewise.
* sysdeps/powerpc/powerpc32/e500/nofpu/fesetenv.c (__fesetenv):
Likewise.
* sysdeps/s390/fpu/fesetenv.c (fesetenv): Rename to __fesetenv and
define as weak alias of __fesetenv. Use libm_hidden_weak.
* sysdeps/sh/sh4/fpu/fesetenv.c (fesetenv): Likewise.
* sysdeps/sparc/fpu/fesetenv.c (__fesetenv): Use libm_hidden_def.
* sysdeps/tile/math_private.h (__fesetenv): New inline function.
* sysdeps/x86_64/fpu/fesetenv.c (fesetenv): Rename to __fesetenv
and define as weak alias of __fesetenv. Use libm_hidden_weak.
* sysdeps/generic/math_private.h (default_libc_fesetenv): Use
__fesetenv instead of fesetenv.
(libc_feresetround_noex_ctx): Likewise.
* sysdeps/alpha/fpu/feupdateenv.c (__feupdateenv): Likewise.
* sysdeps/hppa/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/i386/fpu/feupdateenv.c (__feupdateenv): Likewise.
* sysdeps/ia64/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/m68k/fpu/feupdateenv.c (__feupdateenv): Likewise.
* sysdeps/mips/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/powerpc/nofpu/feupdateenv.c (__feupdateenv): Likewise.
* sysdeps/powerpc/powerpc32/e500/nofpu/feupdateenv.c
(__feupdateenv): Likewise.
* sysdeps/s390/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/sh/sh4/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/sparc/fpu/feupdateenv.c (__feupdateenv): Likewise.
* sysdeps/x86_64/fpu/feupdateenv.c (__feupdateenv): Likewise.
Continuing the fixes for C90 libm functions calling C99 fe* functions,
this patch fixes the case of feholdexcept by making it a weak alias of
__feholdexcept and making the affected code call __feholdexcept.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by the patch). Also tested for ARM
(soft-float) that feholdexcept failures disappear from the
linknamespace test failures (fesetenv, fsetround and feupdateenv
remain to be addressed to complete fixing bug 17748).
[BZ #17748]
* include/fenv.h (__feholdexcept): Declare. Use
libm_hidden_proto.
* math/feholdexcpt.c (feholdexcept): Rename to __feholdexcept and
define as weak alias of __feholdexcept. Use libm_hidden_weak.
* sysdeps/aarch64/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/alpha/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/arm/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/hppa/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/i386/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/ia64/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/m68k/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/mips/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/powerpc/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/powerpc/nofpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/powerpc/powerpc32/e500/nofpu/feholdexcpt.c
(feholdexcept): Likewise.
* sysdeps/s390/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/sh/sh4/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/sparc/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/x86_64/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/generic/math_private.h (default_libc_feholdexcept): Use
__feholdexcept instead of feholdexcept.
(default_libc_feholdexcept_setround): Likewise.
Continuing the fixes for C90 libm functions calling C99 fe* functions,
this patch fixes the case of fegetround by making it a weak alias of
__fegetround and making the affected code call __fegetround.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by the patch). Also tested for ARM
(soft-float) that fegetround failures disappear from the linknamespace
test failures (feholdexcept, fesetenv, fesetround and feupdateenv
remain to be addressed before bug 17748 is fully fixed, although this
patch may suffice to fix the failures in some cases, when the libc_fe*
functions are implemented but there is no architecture-specific sqrt
implementation in use so there were failures from fegetround used by
sqrt but no other such failures).
[BZ #17748]
* include/fenv.h (__fegetround): Declare. Use libm_hidden_proto.
* math/fegetround.c (fegetround): Rename to __fegetround and
define as weak alias of __fegetround. Use libm_hidden_weak.
* sysdeps/aarch64/fpu/fegetround.c (fegetround): Likewise.
* sysdeps/alpha/fpu/fegetround.c (fegetround): Likewise.
* sysdeps/arm/fegetround.c (fegetround): Likewise.
* sysdeps/hppa/fpu/fegetround.c (fegetround): Likewise.
* sysdeps/i386/fpu/fegetround.c (fegetround): Likewise.
* sysdeps/ia64/fpu/fegetround.c (fegetround): Likewise.
* sysdeps/m68k/fpu/fegetround.c (fegetround): Likewise.
* sysdeps/mips/fpu/fegetround.c (fegetround): Likewise.
* sysdeps/powerpc/fpu/fegetround.c (fegetround): Likewise.
Undefine after rather than before function definition; use
parentheses around function name in definition.
(__fegetround): Also undefine macro after function definition.
* sysdeps/powerpc/nofpu/fegetround.c (fegetround): Rename to
__fegetround and define as weak alias of __fegetround. Use
libm_hidden_weak. Do not undefine as macro.
* sysdeps/powerpc/powerpc32/e500/nofpu/fegetround.c (fegetround):
Likewise.
* sysdeps/s390/fpu/fegetround.c (fegetround): Rename to
__fegetround and define as weak alias of __fegetround. Use
libm_hidden_weak.
* sysdeps/sh/sh4/fpu/fegetround.c (fegetround): Likewise.
* sysdeps/sparc/fpu/fegetround.c (fegetround): Likewise.
* sysdeps/tile/math_private.h (__fegetround): New inline function.
* sysdeps/x86_64/fpu/fegetround.c (fegetround): Rename to
__fegetround and define as weak alias of __fegetround. Use
libm_hidden_weak.
* sysdeps/ieee754/dbl-64/e_sqrt.c (__ieee754_sqrt): Use
__fegetround instead of fegetround.
Some C90 libm functions call fegetenv via libc_feholdsetround*
functions in math_private.h. This patch makes them call __fegetenv
instead, making fegetenv into a weak alias for __fegetenv as needed.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by the patch). Also tested for ARM
(soft-float) that fegetenv failures disappear from the linknamespace
test failures (however, similar fixes will also be needed for
fegetround, feholdexcept, fesetenv, fesetround and feupdateenv before
this set of namespace issues covered by bug 17748 is fully fixed and
those linknamespace tests start passing).
[BZ #17748]
* include/fenv.h (__fegetenv): Use libm_hidden_proto.
* math/fegetenv.c (__fegetenv): Use libm_hidden_def.
* sysdeps/aarch64/fpu/fegetenv.c (fegetenv): Rename to __fegetenv
and define as weak alias of __fegetenv. Use libm_hidden_weak.
* sysdeps/alpha/fpu/fegetenv.c (__fegetenv): Use libm_hidden_def.
* sysdeps/arm/fegetenv.c (fegetenv): Rename to __fegetenv and
define as weak alias of __fegetenv. Use libm_hidden_weak.
* sysdeps/hppa/fpu/fegetenv.c (fegetenv): Likewise.
* sysdeps/i386/fpu/fegetenv.c (__fegetenv): Use libm_hidden_def.
* sysdeps/ia64/fpu/fegetenv.c (fegetenv): Rename to __fegetenv and
define as weak alias of __fegetenv. Use libm_hidden_weak.
* sysdeps/m68k/fpu/fegetenv.c (__fegetenv): Use libm_hidden_def.
* sysdeps/mips/fpu/fegetenv.c (fegetenv): Rename to __fegetenv and
define as weak alias of __fegetenv. Use libm_hidden_weak.
* sysdeps/powerpc/fpu/fegetenv.c (__fegetenv): Use
libm_hidden_def.
* sysdeps/powerpc/nofpu/fegetenv.c (__fegetenv): Likewise.
* sysdeps/powerpc/powerpc32/e500/nofpu/fegetenv.c (__fegetenv):
Likewise.
* sysdeps/s390/fpu/fegetenv.c (fegetenv): Rename to __fegetenv and
define as weak alias of __fegetenv. Use libm_hidden_weak.
* sysdeps/sh/sh4/fpu/fegetenv.c (fegetenv): Likewise.
* sysdeps/sparc/fpu/fegetenv.c (__fegetenv): Use libm_hidden_def.
* sysdeps/tile/math_private.h (__fegetenv): New inline function.
* sysdeps/x86_64/fpu/fegetenv.c (fegetenv): Rename to __fegetenv
and define as weak alias of __fegetenv. Use libm_hidden_weak.
* sysdeps/generic/math_private.h (libc_feholdsetround_ctx): Use
__fegetenv instead of fegetenv.
(libc_feholdsetround_noex_ctx): Likewise.
Due to tile missing a bunch of FP exception and rounding
support, the tests generate warnings. These changes fix the
warnings by just not compiling some unused functions, and
adding some attribute ((unused)) tags.
Various C90 and UNIX98 libm functions call feraiseexcept, which is not
in those standards. This causes linknamespace test failures - except
on x86 / x86_64, where feraiseexcept is inline (for the relevant
constant arguments) in bits/fenv.h.
This patch fixes this by making those functions call __feraiseexcept
instead. All changes are applied to all architectures rather than
considering the possibility that some might not be needed in some
cases (e.g. x86) as it seems most maintainable to keep architectures
consistent.
Where __feraiseexcept does not exist, it is added, with feraiseexcept
made a weak alias; where it is a strong alias, it is made weak.
libm_hidden_def / libm_hidden_proto are used with __feraiseexcept
(this might in some cases improve code generation for existing calls
to __feraiseexcept in some code on some architectures). Where there
are dummy feraiseexcept macros (on architectures without
floating-point exceptions support, to avoid compile errors from
references to undefined FE_* macros), corresponding dummy
__feraiseexcept macros are added. And on x86, to ensure
__feraiseexcept calls still get inlined, the inline function in
bits/fenv.h is refactored so that most of it can be reused in an
inline __feraiseexcept in a separate include/bits/fenv.h.
Calls are changed in C90/UNIX98 functions, but generally not in
functions missing from those standards. They are also changed in
libc_fe* functions (on the basis that those might be used in any libm
function), and in feupdateenv (on the same basis - may be used, via
default libc_*, in any libm function - of course feupdateenv will need
changing to __feupdateenv in a subsequent patch to make that fully
namespace-clean).
No __feraiseexcept is added corresponding to the feraiseexcept in
powerpc bits/fenvinline.h, because that macro definition is
conditional on !defined __NO_MATH_INLINES, and glibc libm is built
with -D__NO_MATH_INLINES, so changing internal calls to use
__feraiseexcept should make no difference.
Tested for x86_64 (testsuite; the only change in disassembly of
installed shared libraries is a slight code reordering in clog10, of
no apparent significance). Also tested for MIPS, where (in the
configuration tested) it eliminates math.h linknamespace failures for
n32 and n64 (some for o32 remain because of other issues).
[BZ #17723]
* include/fenv.h (__feraiseexcept): Use libm_hidden_proto.
* math/fraiseexcpt.c (__feraiseexcept): Use libm_hidden_def.
* sysdeps/aarch64/fpu/fraiseexcpt.c (feraiseexcept): Rename to
__feraiseexcept and define as weak alias of __feraiseexcept. Use
libm_hidden_weak.
* sysdeps/arm/fraiseexcpt.c (feraiseexcept): Likewise.
* sysdeps/hppa/fpu/fraiseexcpt.c (feraiseexcept): Likewise.
* sysdeps/i386/fpu/fraiseexcpt.c (__feraiseexcept): Use
libm_hidden_def.
* sysdeps/ia64/fpu/fraiseexcpt.c (feraiseexcept): Rename to
__feraiseexcept and define as weak alias of __feraiseexcept. Use
libm_hidden_weak.
* sysdeps/m68k/coldfire/fpu/fraiseexcpt.c (feraiseexcept):
Likewise.
* sysdeps/microblaze/math_private.h (__feraiseexcept): New macro.
* sysdeps/mips/fpu/fraiseexcpt.c (feraiseexcept): Rename to
__feraiseexcept and define as weak alias of __feraiseexcept. Use
libm_hidden_weak.
* sysdeps/powerpc/fpu/fraiseexcpt.c (__feraiseexcept): Use
libm_hidden_def.
* sysdeps/powerpc/nofpu/fraiseexcpt.c (__feraiseexcept): Likewise.
* sysdeps/powerpc/powerpc32/e500/nofpu/fraiseexcpt.c
(__feraiseexcept): Likewise.
* sysdeps/s390/fpu/fraiseexcpt.c (feraiseexcept): Rename to
__feraiseexcept and define as weak alias of __feraiseexcept. Use
libm_hidden_weak.
* sysdeps/sh/sh4/fpu/fraiseexcpt.c (feraiseexcept): Likewise.
* sysdeps/sparc/fpu/fraiseexcpt.c (__feraiseexcept): Use
libm_hidden_def.
* sysdeps/tile/math_private.h (__feraiseexcept): New macro.
* sysdeps/unix/sysv/linux/alpha/fraiseexcpt.S (__feraiseexcept):
Use libm_hidden_def.
* sysdeps/x86_64/fpu/fraiseexcpt.c (__feraiseexcept): Use
libm_hidden_def.
(feraiseexcept): Define as weak not strong alias. Use
libm_hidden_weak.
* sysdeps/x86/fpu/bits/fenv.h (__feraiseexcept_invalid_divbyzero):
New inline function. Factored out of ...
(feraiseexcept): ... here. Use __feraiseexcept_invalid_divbyzero.
* sysdeps/x86/fpu/include/bits/fenv.h: New file.
* math/e_scalb.c (invalid_fn): Call __feraiseexcept instead of
feraiseexcept.
* math/w_acos.c (__acos): Likewise.
* math/w_asin.c (__asin): Likewise.
* math/w_ilogb.c (__ilogb): Likewise.
* math/w_j0.c (y0): Likewise.
* math/w_j1.c (y1): Likewise.
* math/w_jn.c (yn): Likewise.
* math/w_log.c (__log): Likewise.
* math/w_log10.c (__log10): Likewise.
* sysdeps/aarch64/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/aarch64/fpu/math_private.h
(libc_feupdateenv_test_aarch64): Likewise.
* sysdeps/alpha/fpu/feupdateenv.c (__feupdateenv): Likewise.
* sysdeps/arm/fenv_private.h (libc_feupdateenv_test_vfp): Likewise.
* sysdeps/arm/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/ia64/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/m68k/fpu/feupdateenv.c (__feupdateenv): Likewise.
* sysdeps/mips/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/powerpc/fpu/e_sqrt.c (__slow_ieee754_sqrt): Likewise.
* sysdeps/s390/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/sh/sh4/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/sparc/fpu/feupdateenv.c (__feupdateenv): Likewise.
[BZ #17747]
The y0/y1/yn and j0/j1/jn functions provided a strong_alias
to the "l"-suffixed variants when no long double support is
being compiled. This breaks namespace conformance when the
basename versions conform but the l-suffixed ones don't.
Fixed by making them weak aliases instead.
Bug 17724 reports references to fesetround being brought in by
ldbl-128ibm rintl via references to __rintl from __kernel_standard_l.
Because all three __kernel_standard* functions are in the same file,
this gets brought in even though only the long double version
__kernel_standard_l needs __rintl, and the C90 functions use only
__kernel_standard.
This patch fixes this by splitting the three versions into separate
files; it's fine for long double functions to refer to fe* functions
directly, unless they get called by C90 double functions.
Tested for x86_64 (testsuite; the reordering of code means disassembly
of shared libraries can't usefully be compared). Tested for powerpc
that the relevant issue disappears from the linknamespace test
output.
[BZ #17724]
* sysdeps/ieee754/k_standard.c: Don't include <float.h>.
(__kernel_standard_f): Remove. Moved to k_standardf.c.
(__kernel_standard_l): Remove. Moved to k_standardl.c with
(char *) casts added.
* sysdeps/ieee754/k_standardf.c: New file.
* sysdeps/ieee754/k_standardl.c: Likewise.
* math/Makefile (libm-support): Remove k_standard.
(libm-calls): Add k_standard.
Continuing the removal of the obsolete INTDEF / INTUSE mechanism, this
patch removes the use of INTDEF for __ldexpf. As far as I can tell,
the resulting alias is completely unused.
Tested for x86_64 that stripped installed shared libraries are
unchanged by this patch.
[BZ #14132]
* math/s_ldexpf.c (__ldexpf): Do not use INTDEF.
Building this test on ARM fails because the prototypes for the long
double variants of the math functions are unavailable.
Add an additional include guard to math.h that enables long double math
function declarations if _LIBC_TEST is defined and define _LIBC_TEST in
stdlib/tst-strtod-round.c.
ChangeLog:
2014-09-30 Will Newton <will.newton@linaro.org>
* math/math.h: Define long double math functions if
_LIBC_TEST is defined.
* stdlib/tst-strtod-round.c: Define _LIBC_TEST.
The check for only __GNUC_STDC_INLINE__ and __GNUC_GNU_INLINE__ may
not be sufficient since those flags were added during initial support
for C99 inlining semantics. There is also a problem with always
defining __extern_inline and __extern_always_inline, since it enables
inline wrapper functions even when GNU inlining semantics are not
guaranteed. This, along with the possibility of such wrappers using
redirection (btowc for example) could result in compiler generating an
infinitely recusrive call to the function.
In fact it was such a recursion that led to this code being written
the way it was; see:
https://bugzilla.redhat.com/show_bug.cgi?id=186410
The initial change was to fix bugs 14530 and 13741, but they can be
resolved by checking if __fortify_function and/or
__extern_always_inline are defined, as it has been done in this patch.
In addition, I have audited uses of __extern_always_inline to make
sure that none of the uses result in compilation errors.
There is however a regression in this patch for llvm, since it reverts
the llvm expectation that __GNUC_STDC_INLINE__ or __GNUC_GNU_INLINE__
definition imply proper extern inline semantics.
2014-09-16 Siddhesh Poyarekar <siddhesh@redhat.com>
Jakub Jelinek <jakub@redhat.com>
[BZ #17266]
* libio/stdio.h: Check definition of __fortify_function
instead of __extern_always_inline to include bits/stdio2.h.
* math/bits/math-finite.h [__USE_XOPEN || __USE_ISOC99]: Also
check if __extern_always_inline is defined.
[__USE_MISC || __USE_XOPEN]: Likewise.
[__USE_ISOC99] Likewise.
* misc/sys/cdefs.h (__fortify_function): Define only if
__extern_always_inline is defined.
[!__cplusplus || __GNUC_PREREQ (4,3)]: Revert to defining
__extern_always_inline and __extern_inline only for g++-4.3
and newer or a compatible gcc.
This patch fixes bug 17088, fallback fesetenv and feupdateenv not
giving an error for an FE_NOMASK_ENV argument when it requires traps
to be enabled. (This is the bug tested for by test-fenv-return.c.)
Tested mips64 soft-float.
[BZ #17088]
* math/fesetenv.c (__fesetenv)
[FE_NOMASK_ENV && FE_ALL_EXCEPT != 0]: Return 1 for FE_NOMASK_ENV.
* math/feupdateenv.c (__feupdateenv)
[FE_NOMASK_ENV && FE_ALL_EXCEPT != 0]: Likewise.
This patch fixes bugs 16561 and 16562, bad results of yn in overflow
cases in non-default rounding modes, both because an intermediate
overflow in the recurrence does not get detected if the result is not
an infinity and because an overflowing result may occur in the wrong
sign. The fix is to set FE_TONEAREST mode internally for the parts of
the function where such overflows can occur (which includes the call
to y1 - where yn is used to compute a Bessel function of order -1,
negating the result of y1 isn't correct for overflowing results in
directed rounding modes) and then compute an overflowing value in the
original rounding mode if the to-nearest result was an infinity.
Tested x86_64 and x86 and ulps updated accordingly. Also tested for
mips64 and powerpc32 to test the ldbl-128 and ldbl-128ibm changes.
(The tests for these bugs were added in my previous y1 patch, so the
only thing this patch has to do with the testsuite is enable yn
testing in all rounding modes.)
[BZ #16561]
[BZ #16562]
* sysdeps/ieee754/dbl-64/e_jn.c: Include <float.h>.
(__ieee754_yn): Set FE_TONEAREST mode internally and then
recompute overflowing results in original rounding mode.
* sysdeps/ieee754/flt-32/e_jnf.c: Include <float.h>.
(__ieee754_ynf): Set FE_TONEAREST mode internally and then
recompute overflowing results in original rounding mode.
* sysdeps/ieee754/ldbl-128/e_jnl.c: Include <float.h>.
(__ieee754_ynl): Set FE_TONEAREST mode internally and then
recompute overflowing results in original rounding mode.
* sysdeps/ieee754/ldbl-128ibm/e_jnl.c: Include <float.h>.
(__ieee754_ynl): Set FE_TONEAREST mode internally and then
recompute overflowing results in original rounding mode.
* sysdeps/ieee754/ldbl-96/e_jnl.c: Include <float.h>.
(__ieee754_ynl): Set FE_TONEAREST mode internally and then
recompute overflowing results in original rounding mode.
* sysdeps/i386/fpu/fenv_private.h [!__SSE2_MATH__]
(libc_feholdsetround_ctx): New macro.
* math/libm-test.inc (yn_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps : Likewise.
This patch fixes spurious underflows from exp10 for arguments near 0
(part of bug 16560; that bug also includes spurious underflows from
exp2, which are not fixed by this patch). The problem is underflows
in the internal computation converting the exp10 argument to arguments
for exp (with extra precision), and the fix is simply to return 1
early for arguments near enough to 0 (just as arguments with large
enough magnitude have their own overflow / underflow logic at the
start of the function).
Tested x86_64 and x86 and ulps updated accordingly; also tested for
powerpc32 and mips64 to validate the ldbl-128ibm and ldbl-128 changes.
[BZ #16560]
* sysdeps/ieee754/dbl-64/e_exp10.c (__ieee754_exp10): Return 1 for
arguments close to 0.
* sysdeps/ieee754/ldbl-128/e_exp10l.c (__ieee754_exp10l):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_exp10l.c (__ieee754_exp10l):
Likewise.
* math/auto-libm-test-in: Add more tests of exp10.
* math/auto-libm-test-out: Regenerated.
* sysdeps/x86_64/fpu/libm-test-ulps: Update.
This patch fixes bug 16539, spurious underflow exceptions from x86 /
x86-64 expm1l. The problem is that the computation of a base-2
exponent with extra precision involves spurious underflows for
arguments that are small but not subnormal, so a check is added to
just return the argument in those cases. (If the argument *is*
subnormal, underflowing is correct and the existing code will always
underflow, so it suffices to keep using the existing code in that
case; some expm1 implementations have a bug (bug 16353) with missing
underflow exceptions, but I don't think there's such a bug in this
particular version.)
Tested x86_64 and x86; no ulps updates needed.
(auto-libm-test-out diffs omitted below.)
[BZ #16539]
* sysdeps/i386/fpu/e_expl.S (IEEE754_EXPL) [USE_AS_EXPM1L]: Just
return the argument for normal arguments with exponent below -64.
* sysdeps/x86_64/fpu/e_expl.S (IEEE754_EXPL) [USE_AS_EXPM1L]:
Likewise.
* math/auto-libm-test-in: Add another test of expm1.
* math/auto-libm-test-out: Regenerated.
This patch fixes bug 16287, spurious underflows from ldbl-128 erfl
arising from it calling erfcl for arguments with absolute value at
least 1.0, although for large positive arguments erfcl correctly
underflows but erfl shouldn't. The fix is simply to avoid calling
erfcl, and just return 1, for arguments above a cut-off large enough
that erfl correctly rounds to-nearest as 1 but not so large that erfcl
underflows.
Tested mips64. Also tested x86_64 and x86 to confirm the new tests
(taken from the tests of erfc) don't cause any problems there; no ulps
updates needed.
[BZ #16287]
* sysdeps/ieee754/ldbl-128/s_erfl.c (__erfl): Return 1 without
calling __erfcl for arguments at least 16.
* math/auto-libm-test-in: Add more tests of erf.
* math/auto-libm-test-out: Regenerated.
This patch fixes bug 16354, spurious underflows from cosh when a tiny
argument is passed to expm1 and expm1 correctly underflows although
the final result of cosh should be 1. As noted in that bug, some
cases are latent because of expm1 implementations not raising
underflow (bug 16353), but all the implementations are fixed
similarly. They already contained checks for tiny arguments, but the
checks were too late to avoid underflow from expm1 (although they
would avoid underflow from subsequent squaring of the result of
expm1); they are moved before the expm1 calls.
The thresholds used for considering arguments tiny are not
particularly consistent in how they relate to the precision of the
floating-point format in question. They are, however, all sufficient
to ensure that the round-to-nearest result of cosh is indeed 1 below
the threshold (although sometimes they are smaller than necessary).
But the previous logic did not return 1, but the previously computed 1
+ expm1(abs(x)) value. And the thresholds in the ldbl-128 and
ldbl-128ibm code (0x1p-71L - I suspect 0x3f8b was intended in the code
instead of 0x3fb8 - and (roughly) 0x1p-55L) are not sufficient for
that value to be 1. So by moving the test for tiny arguments, and
consequently returning 1 directly now the expm1 value hasn't been
computed by that point, this patch also fixes bug 17061, the (large
number of ulps) inaccuracy for small arguments in those
implementations. Tests for that bug are duly added.
Tested x86_64 and x86 and ulps updated accordingly. Also tested for
mips64 and powerpc32 to validate the ldbl-128 and ldbl-128ibm changes.
[BZ #16354]
[BZ #17061]
* sysdeps/ieee754/dbl-64/e_cosh.c (__ieee754_cosh): Check for
small arguments before calling __expm1.
* sysdeps/ieee754/flt-32/e_coshf.c (__ieee754_coshf): Check for
small arguments before calling __expm1f.
* sysdeps/ieee754/ldbl-128/e_coshl.c (__ieee754_coshl): Check for
small arguments before calling __expm1l.
* sysdeps/ieee754/ldbl-128ibm/e_coshl.c (__ieee754_coshl):
Likewise.
* sysdeps/ieee754/ldbl-96/e_coshl.c (__ieee754_coshl): Likewise.
* math/auto-libm-test-in: Add more cosh tests. Do not allow
spurious underflow for some cosh tests.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
This patch fixes bug 17050, missing errno setting for y1 overflow (for
small positive arguments). An appropriate check is added for overflow
directly in the __ieee754_y1 implementation, similar to the check
present for yn (doing it there rather than in the wrapper also avoids
yn needing to repeat the check when called for order 1 or -1 and it
uses __ieee754_y1).
Tested x86_64 and x86; no ulps update needed. Also tested for mips64
to verify the ldbl-128 fix (the ldbl-128ibm code just #includes the
ldbl-128 file).
[BZ #17050]
* sysdeps/ieee754/dbl-64/e_j1.c: Include <errno.h>.
(__ieee754_y1): Set errno if return value overflows.
* sysdeps/ieee754/flt-32/e_j1f.c: Include <errno.h>.
(__ieee754_y1f): Set errno if return value overflows.
* sysdeps/ieee754/ldbl-128/e_j1l.c: Include <errno.h>.
(__ieee754_y1l): Set errno if return value overflows.
* sysdeps/ieee754/ldbl-96/e_j1l.c: Include <errno.h>.
(__ieee754_y1l): Set errno if return value overflows.
* math/auto-libm-test-in: Add more tests of y0, y1 and yn.
* math/auto-libm-test-out: Regenerated.
This patch enables testing of cpow in all rounding modes using
ALL_RM_TEST. There were two reasons this was previously deferred:
* MPC has complicated rounding-mode-dependent rules for the signs of
exact zero real or imaginary parts in the result of mpc_pow. Annex
G does not impose any such requirements and I don't think glibc
should try to implement any particular logic here. This patch adds
support for gen-auto-libm-tests passing the IGNORE_ZERO_INF_SIGN
flag to libm-test.inc.
* Error accumulations in some tests in non-default rounding modes
exceed the maximum error permitted in libm-test.inc. This patch
marks the problem tests with xfail-rounding. (It might be possible
to reduce the accumulations a bit by using round-to-nearest when
cpow calls clog, but I don't think there's much point; the
implementation approach for cpow is fundamentally deficient, as
discussed in the existing bug for cpow inaccuracy which can
reasonably be considered to cover these less-inaccurate cases as
well. It's possible that the test "cpow 2 0 10 0" will also need
xfail-rounding on some platforms.)
Tested x86_64 and x86 and ulps updated accordingly.
* math/gen-auto-libm-tests.c: Document use of
ignore-zero-inf-sign.
(input_flag_type): Add value flag_ignore_zero_inf_sign.
(input_flags): Add ignore-zero-inf-sign.
(output_for_one_input_case): Handle flag_ignore_zero_inf_sign.
* math/gen-libm-test.pl (generate_testfile): Handle
ignore-zero-inf-sign.
* math/auto-libm-test-in: Mark some cpow tests with
ignore-zero-inf-sign and some with xfail-rounding.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (cpow_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch fixes bug 16315, bad pow handling of overflow/underflow in
non-default rounding modes. Tests of pow are duly converted to
ALL_RM_TEST to run all tests in all rounding modes.
There are two main issues here. First, various implementations
compute a negative result by negating a positive result, but this
yields inappropriate overflow / underflow values for directed
rounding, so either overflow / underflow results need recomputing in
the correct sign, or the relevant overflowing / underflowing operation
needs to be made to have a result of the correct sign. Second, the
dbl-64 implementation sets FE_TONEAREST internally; in the overflow /
underflow case, the result needs recomputing in the original rounding
mode.
Tested x86_64 and x86 and ulps updated accordingly.
[BZ #16315]
* sysdeps/i386/fpu/e_pow.S (__ieee754_pow): Ensure possibly
overflowing or underflowing operations take place with sign of
result.
* sysdeps/i386/fpu/e_powf.S (__ieee754_powf): Likewise.
* sysdeps/i386/fpu/e_powl.S (__ieee754_powl): Likewise.
* sysdeps/ieee754/dbl-64/e_pow.c: Include <math.h>.
(__ieee754_pow): Recompute overflowing and underflowing results in
original rounding mode.
* sysdeps/x86/fpu/powl_helper.c: Include <stdbool.h>.
(__powl_helper): Allow negative argument X and scale negated value
as needed. Avoid passing value outside [-1, 1] to f2xm1.
* sysdeps/x86_64/fpu/e_powl.S (__ieee754_powl): Ensure possibly
overflowing or underflowing operations take place with sign of
result.
* sysdeps/x86_64/fpu/multiarch/e_pow.c [HAVE_FMA4_SUPPORT]:
Include <math.h>.
* math/auto-libm-test-in: Add more tests of pow.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (pow_test): Use ALL_RM_TEST.
(pow_tonearest_test_data): Remove.
(pow_test_tonearest): Likewise.
(pow_towardzero_test_data): Likewise.
(pow_test_towardzero): Likewise.
(pow_downward_test_data): Likewise.
(pow_test_downward): Likewise.
(pow_upward_test_data): Likewise.
(pow_test_upward): Likewise.
(main): Don't call removed functions.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
Errno is not set and the testcases will fail.
Now the scalbln-aliases are removed in i386/m68
and the wrappers are used when calling the scalbln-functions.
On ia64 only scalblnf has its own implementation.
For scalbln and scalblnl the ieee754/dbl-64 and ieee754/ldbl-96 are used, thus
the wrappers are needed, too.
This patch fixes few failures in nearbyintl() where the fraction part is
close to 0.5.i The new tests added report few extra failures in
nearbyint_downward and nearbyint_towardzero which is a known issue.
Fixes#17031.
As with other issues of this kind, bug 17042 is log2 (1) wrongly
returning -0 instead of +0 in round-downward mode because of
implementations effectively in terms of log1p (x - 1). This patch
fixes the issue in the same way used for log and log10.
Tested x86_64 and x86 and ulps updated accordingly. Also tested for
mips64 to confirm a fix was needed for ldbl-128 and to validate that
fix (also applied to ldbl-128ibm since that version of log2l is
essentially the same as the ldbl-128 one).
[BZ #17042]
* sysdeps/i386/fpu/e_log2.S (__ieee754_log2): Take absolete value
when x - 1 is zero.
* sysdeps/i386/fpu/e_log2f.S (__ieee754_log2f): Likewise.
* sysdeps/i386/fpu/e_log2l.S (__ieee754_log2l): Likewise.
* sysdeps/ieee754/ldbl-128/e_log2l.c (__ieee754_log2l): Return
0.0L for an argument of 1.0L.
* sysdeps/ieee754/ldbl-128ibm/e_log2l.c (__ieee754_log2l):
Likewise.
* sysdeps/x86_64/fpu/e_log2l.S (__ieee754_log2l): Take absolute
value when x - 1 is zero.
* math/libm-test.inc (log2_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
One wart in the original support for test wrappers for cross testing,
as noted in
<https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the
requirement for test wrappers to pass a poorly-defined set of
environment variables from the build system to the system running the
glibc under test. Although some variables are passed explicitly via
$(test-wrapper-env), including LD_* variables that simply can't be
passed implicitly because of the side effects they'd have on the build
system's dynamic linker, others are passed implicitly, including
variables such as GCONV_PATH and LOCPATH that could potentially affect
the build system's libc (so effectively relying on any such effects
not breaking the wrappers). In addition, the code in
cross-test-ssh.sh for preserving environment variables is fragile (it
depends on how bash formats a list of exported variables, and could
well break for multi-line variable definitions where the contents
contain things looking like other variable definitions).
This patch moves to explicitly passing environment variables via
$(test-wrapper-env). Makefile variables that previously used
$(test-wrapper) are split up into -before-env and -after-env parts
that can be passed separately to the various .sh files used in
testing, so those files can then insert environment settings between
the two parts.
The common default environment settings in make-test-out are made into
a separate makefile variable that can also be passed to scripts,
rather than many scripts duplicating those settings (for testing an
installed glibc, it is desirable to have the GCONV_PATH setting on
just one place, so just that one place needs to support it pointing to
an installed sysroot instead of the build tree). The default settings
are included in the variables such as $(test-program-prefix), so that
if tests do not need any non-default settings they can continue to use
single variables rather than the split-up variables.
Although this patch cleans up LC_ALL=C settings (that being part of
the common defaults), various LANG=C and LANGUAGE=C settings remain.
Those are generally unnecessary and I propose a subsequent cleanup to
remove them. LC_ALL takes precedence over LANG, and while LANGUAGE
takes precedence over LC_ALL, it only does so for settings other than
LC_ALL=C. So LC_ALL=C on its own is sufficient to ensure the C
locale, and anything that gets LC_ALL=C does not need the other
settings.
While preparing this patch I noticed some tests with .sh files that
appeared to do nothing beyond what the generic makefile support for
tests can do (localedata/tst-wctype.sh - the makefiles support -ENV
variables and .input files - and localedata/tst-mbswcs.sh - just runs
five tests that could be run individually from the makefile). So I
propose another subsequent cleanup to move those to using the generic
support instead of special .sh files.
Tested x86_64 (native) and powerpc32 (cross).
* Makeconfig (run-program-env): New variable.
(run-program-prefix-before-env): Likewise.
(run-program-prefix-after-env): Likewise.
(run-program-prefix): Define in terms of new variables.
(built-program-cmd-before-env): New variable.
(built-program-cmd-after-env): Likewise.
(built-program-cmd): Define in terms of new variables.
(test-program-prefix-before-env): New variable.
(test-program-prefix-after-env): Likewise.
(test-program-prefix): Define in terms of new variables.
(test-program-cmd-before-env): New variable.
(test-program-cmd-after-env): Likewise.
(test-program-cmd): Define in terms of new variables.
* Rules (make-test-out): Use $(run-program-env).
* scripts/cross-test-ssh.sh (env_blacklist): Remove variable.
(help): Do not mention environment variables. Mention
--timeoutfactor option.
(timeoutfactor): New variable.
(blacklist_exports): Remove function.
(exports): Remove variable.
(command): Do not include ${exports}.
* manual/install.texi (Configuring and compiling): Do not mention
test wrappers preserving environment variables. Mention that last
assignment to a variable must take precedence.
* INSTALL: Regenerated.
* benchtests/Makefile (run-bench): Use $(run-program-env).
* catgets/Makefile ($(objpfx)test1.cat): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)test2.cat): Do not specify environment variables
explicitly.
($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)sample.SJIS.cat): Do not specify environment variables
explicitly.
* catgets/test-gencat.sh: Use test_program_cmd_before_env,
run_program_env and test_program_cmd_after_env arguments.
* elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env).
* elf/tst-pathopt.sh: Use run_program_env argument.
* iconvdata/Makefile ($(objpfx)iconv-test.out): Use
$(test-wrapper-env) and $(run-program-env).
* iconvdata/run-iconv-test.sh: Use test_wrapper_env and
run_program_env arguments.
* iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly.
* intl/Makefile ($(objpfx)tst-gettext.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-gettext2.out): Likewise.
* intl/tst-gettext.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* intl/tst-gettext2.sh: Likewise.
* intl/tst-gettext4.sh: Do not set environment variables
explicitly.
* intl/tst-gettext6.sh: Likewise.
* intl/tst-translit.sh: Likewise.
* malloc/Makefile ($(objpfx)tst-mtrace.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* malloc/tst-mtrace.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* math/Makefile (run-regen-ulps): Use $(run-program-env).
* nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env).
* nptl/tst-tls6.sh: Use run_program_env argument. Set LANG=C
explicitly with each use of ${test_wrapper_env}.
* posix/Makefile ($(objpfx)wordexp-tst.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* posix/tst-getconf.sh: Do not set environment variables
explicitly.
* posix/wordexp-tst.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* stdio-common/tst-printf.sh: Do not set environment variables
explicitly.
* stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
Split $test calls into $test_pre and $test.
* timezone/Makefile (build-testdata): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
localedata/ChangeLog:
* Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)sort-test.out): Use $(test-program-prefix-before-env),
$(run-program-env) and $(test-program-prefix-after-env).
($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env),
$(run-program-env) and $(run-program-prefix-after-env).
($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env),
$(run-program-env), $(run-program-prefix-after-env),
$(test-program-prefix-before-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)tst-wctype.out): Likewise.
($(objpfx)tst-langinfo.out): Likewise.
($(objpfx)tst-langinfo-static.out): Likewise.
* gen-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* sort-test.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* tst-ctype.sh: Use tst_ctype_before_env, run_program_env and
tst_ctype_after_env arguments.
* tst-fmon.sh: Use run_program_prefix_before_env, run_program_env
and run_program_prefix_after_env arguments.
* tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env
and tst_langinfo_after_env arguments.
* tst-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* tst-mbswcs.sh: Do not set environment variables explicitly.
* tst-numeric.sh: Likewise.
* tst-rpmatch.sh: Likewise.
* tst-trans.sh: Use run_program_prefix_before_env,
run_program_env, run_program_prefix_after_env,
test_program_prefix_before_env and test_program_prefix_after_env
arguments.
* tst-wctype.sh: Use tst_wctype_before_env, run_program_env and
tst_wctype_after_env arguments.
As with various other issues of this kind, bug 16977 is log10 (1)
wrongly returning -0 rather than +0 in round-downward mode because of
an implementation effectively in terms of log1p (x - 1). This patch
fixes the issue in the same way used for log.
Tested x86_64 and x86 and ulps updated accordingly. Also tested for
mips64 to confirm a fix was needed for ldbl-128 and to validate that
fix (also applied to ldbl-128ibm since that version of logl is
essentially the same as the ldbl-128 one).
[BZ #16977]
* sysdeps/i386/fpu/e_log10.S (__ieee754_log10): Take absolute
value when x - 1 is zero.
* sysdeps/i386/fpu/e_log10f.S (__ieee754_log10f): Likewise.
* sysdeps/i386/fpu/e_log10l.S (__ieee754_log10l): Likewise.
* sysdeps/ieee754/ldbl-128/e_log10l.c (__ieee754_log10l): Return
0.0L for an argument of 1.0L.
* sysdeps/ieee754/ldbl-128ibm/e_log10l.c (__ieee754_log10l):
Likewise.
* sysdeps/x86_64/fpu/e_log10l.S (__ieee754_log10l): Take absolute
value when x - 1 is zero.
* math/libm-test.inc (log10_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
glibc's Makeconfig defines some variables such as $(libm) and $(libdl)
for linking with libraries built by glibc, and nptl/Makeconfig
(included by the toplevel Makeconfig) defines others such as
$(shared-thread-library).
In some places glibc's Makefiles use those variables when linking
against the relevant libraries, but in other places they hardcode the
location of the libraries in the build tree. This patch cleans up
various places to use the variables that already exist (in the case of
libm, replacing several duplicate definitions of a $(link-libm)
variable in subdirectory Makefiles). (It's not necessarily exactly
equivalent to what the existing code does - in particular,
$(shared-thread-library) includes libpthread_nonshared, but is
replacing places that just referred to libpthread.so. But I think
that change is desirable on the general principle of linking things as
close as possible to the way in which they would be linked with an
installed library, unless there is a clear reason not to do so.)
To support running tests with an installed copy of glibc without
needing the full build tree from when that copy was built, I think it
will be useful to use such variables more generally and systematically
- every time the rules for building a test refer to some file from the
build tree that's also installed by glibc, use a makefile variable so
that the installed-testing case can point those variables to installed
copies of the files. This patch just deals with straightforward cases
where such variables already exist.
It's quite possible some uses of $(shared-thread-library) should
actually be a new $(thread-library) variable that's set appropriately
in the --disable-shared case, if those uses would in fact work without
shared libraries. I didn't change the status quo that those cases
hardcode use of a shared library whether or not it's actually needed
(but other uses such as $(libm) and $(libdl) would now get the static
library if the shared library isn't built, when some previously
hardcoded use of the shared library - if they actually need shared
libraries, the test itself needs an enable-shared conditional anyway).
Tested x86_64.
* benchtests/Makefile
($(addprefix $(objpfx)bench-,$(bench-math))): Depend on $(libm),
not $(common-objpfx)math/libm.so.
($(addprefix $(objpfx)bench-,$(bench-pthread))): Depend on
$(shared-thread-library), not $(common-objpfx)nptl/libpthread.so.
* elf/Makefile ($(objpfx)noload): Depend on $(libdl), not
$(common-objpfx)dlfcn/libdl.so.
($(objpfx)tst-audit8): Depend on $(libm), not
$(common-objpfx)math/libm.so.
* malloc/Makefile ($(objpfx)libmemusage.so): Depend on $(libdl),
not $(common-objpfx)dlfcn/libdl.so.
* math/Makefile
($(addprefix $(objpfx),$(filter-out $(tests-static),$(tests)))):
Depend on $(libm), not $(objpfx)libm.so. Do not condition on
[$(build-shared) = yes].
($(objpfx)test-fenv-tls): Depend on $(shared-thread-library), not
$(common-objpfx)nptl/libpthread.so.
* misc/Makefile ($(objpfx)tst-tsearch): Depend on $(libm), not
$(common-objpfx)math/libm.so$(libm.so-version) or
$(common-objpfx)math/libm.a depending on [$(build-shared) = yes].
* nptl/Makefile ($(objpfx)tst-unload): Depend on $(libdl), not
$(common-objpfx)dlfcn/libdl.so.
* setjmp/Makefile (link-libm): Remove variable.
($(objpfx)tst-setjmp-fp): Depend on $(libm), not $(link-libm).
* stdio-common/Makefile (link-libm): Remove variable.
($(objpfx)tst-printf-round): Depend on $(libm), not $(link-libm).
* stdlib/Makefile (link-libm): Remove variable.
($(objpfx)bug-getcontext): Depend on $(libm), not $(link-libm).
($(objpfx)tst-strtod-round): Likewise.
($(objpfx)tst-tininess): Likewise.
($(objpfx)tst-strtod-underflow): Likewise.
($(objpfx)tst-strtod6): Likewise.
($(objpfx)tst-tls-atexit): Depend on $(shared-thread-library) and
$(libdl), not $(common-objpfx)nptl/libpthread.so and
$(common-objpfx)dlfcn/libdl.so.
Bug 16564 is spurious overflow of log1pl (LDBL_MAX) in FE_UPWARD mode,
resulting from log1pl adding 1 to its argument (for arguments not
close to 0), which overflows in that mode. This patch fixes this by
avoiding adding 1 to large arguments (precisely what counts as large
depends on the floating-point format).
Tested x86_64 and x86, and spot-checked log1pl tests on mips64 and
powerpc64.
[BZ #16564]
* sysdeps/i386/fpu/s_log1pl.S (__log1pl): Do not add 1 to positive
arguments with exponent 65 or above.
* sysdeps/ieee754/ldbl-128/s_log1pl.c (__log1pl): Do not add 1 to
arguments 0x1p113L or above.
* sysdeps/ieee754/ldbl-128ibm/s_log1pl.c (__log1pl): Do not add 1
to arguments 0x1p107L or above.
* sysdeps/x86_64/fpu/s_log1pl.S (__log1pl): Do not add 1 to
positive arguments with exponent 65 or above.
* math/auto-libm-test-in: Add more tests of log1p.
* math/auto-libm-test-out: Regenerated.
According to C99/C11 Annex G, cacos applied to a value with real part
+Inf and finite imaginary part should produce a result with real part
+0. glibc wrongly produces a result with real part -0 in FE_DOWNWARD
mode. This patch fixes this by checking for zero results in the
relevant case of non-finite arguments (where there should never be a
result with -0 real part), and converts the tests of cacos to
ALL_RM_TEST.
Tested x86_64 and x86 and ulps updated accordingly.
[BZ #16928]
* math/s_cacos.c (__cacos): Ensure zero real part of result from
non-finite arguments is +0.
* math/s_cacosf.c (__cacosf): Likewise.
* math/s_cacosl.c (__cacosl): Likewise.
* math/libm-test.inc (cacos_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
According to C99 and C11 Annex F, acosh (1) should be +0 in all
rounding modes. However, some implementations in glibc wrongly return
-0 in round-downward mode (which is what you get if you end up
computing log1p (-0), via 1 - 1 being -0 in round-downward mode).
This patch fixes the problem implementations, by correcting the test
for an exact 1 value in the ldbl-96 implementation to allow for the
explicit high bit of the mantissa, and by inserting fabs instructions
in the i386 implementations; tests of acosh are duly converted to
ALL_RM_TEST. I believe all the other sysdeps/ieee754 implementations
are already OK (I haven't checked the ia64 versions, but if buggy then
that will be obvious from the results of test runs after this patch is
in).
Tested x86_64 and x86 and ulps updated accordingly.
[BZ #16927]
* sysdeps/i386/fpu/e_acosh.S (__ieee754_acosh): Use fabs on x-1
value.
* sysdeps/i386/fpu/e_acoshf.S (__ieee754_acoshf): Likewise.
* sysdeps/i386/fpu/e_acoshl.S (__ieee754_acoshl): Likewise.
* sysdeps/ieee754/ldbl-96/e_acoshl.c (__ieee754_acoshl): Correct
for explicit high bit of mantissa when testing for argument equal
to 1.
* math/libm-test.inc (acosh_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
Bug 16516 reports spurious underflows from erf (for all floating-point
types), when the result is close to underflowing but does not actually
underflow.
erf (x) is about (2/sqrt(pi))*x for x close to 0, so there are
subnormal arguments for which it does not underflow. The various
implementations do (x + efx*x) (for efx = 2/sqrt(pi) - 1), for greater
accuracy than if just using a single multiplication by an
approximation to 2/sqrt(pi) (effectively, this way there are a few
more bits in the approximation to 2/sqrt(pi)). This can introduce
underflows when efx*x underflows even though the final result does
not, so a scaled calculation with 8*efx is done in these cases - but 8
is not a big enough scale factor to avoid all such underflows. 16 is
(any underflows with a scale factor of 16 would only occur when the
final result underflows), so this patch changes the code to use that
factor. Rather than recomputing all the values of the efx8 variable,
it is removed, leaving it to the compiler's constant folding to
compute 16*efx. As such scaling can also lose underflows when the
final scaling down happens to be exact, appropriate checks are added
to ensure underflow exceptions occur when required in such cases.
Tested x86_64 and x86; no ulps updates needed. Also spot-checked for
powerpc32 and mips64 to verify the changes to the ldbl-128ibm and
ldbl-128 implementations.
[BZ #16516]
* sysdeps/ieee754/dbl-64/s_erf.c (efx8): Remove variable.
(__erf): Scale by 16 instead of 8 in potentially underflowing
case. Ensure exception if result actually underflows.
* sysdeps/ieee754/flt-32/s_erff.c (efx8): Remove variable.
(__erff): Scale by 16 instead of 8 in potentially underflowing
case. Ensure exception if result actually underflows.
* sysdeps/ieee754/ldbl-128/s_erfl.c: Include <float.h>.
(efx8): Remove variable.
(__erfl): Scale by 16 instead of 8 in potentially underflowing
case. Ensure exception if result actually underflows.
* sysdeps/ieee754/ldbl-128ibm/s_erfl.c: Include <float.h>.
(efx8): Remove variable.
(__erfl): Scale by 16 instead of 8 in potentially underflowing
case. Ensure exception if result actually underflows.
* sysdeps/ieee754/ldbl-96/s_erfl.c: Include <float.h>.
(efx8): Remove variable.
(__erfl): Scale by 16 instead of 8 in potentially underflowing
case. Ensure exception if result actually underflows.
* math/auto-libm-test-in: Add more tests of erf.
* math/auto-libm-test-out: Regenerated.
Besides fixing the bugzilla, this also fixes corner-cases where the high
and low double differ greatly in magnitude, and handles a denormal
input without resorting to a fp rescale.
[BZ #16740]
[BZ #16619]
* sysdeps/ieee754/ldbl-128ibm/s_frexpl.c (__frexpl): Rewrite.
* math/libm-test.inc (frexp_test_data): Add tests.
This patch fixes incorrect results from catan and catanh of certain
special inputs in round-downward mode (bug 16799), and incorrect
results of __ieee754_logf (+/-0) in round-downward mode (bug 16800)
that show up through catan/catanh when tested in all rounding modes,
but not directly in the testing for logf because the bug gets hidden
by the wrappers.
Both bugs involve a zero that should be +0 being -0 instead: one
computed as (1-x)*(1+x) in the catan/catanh case, and one as (x-x) in
the logf case. The fixes ensure positive zero is used. Testing of
catan and catanh in all rounding modes is duly enabled.
I expect there are various other bugs in special cases in __ieee754_*
functions that are normally hidden by the wrappers but would show up
for testing with -lieee (or in future with -fno-math-errno if we
replace -lieee and _LIB_VERSION with compile-time redirection to new
*_noerrno symbol names).
Tested x86_64 and x86 and ulps updated accordingly.
[BZ #16799]
[BZ #16800]
* math/s_catan.c (__catan): Avoid passing -0 denominator to atan2
with 0 numerator.
* math/s_catanf.c (__catanf): Likewise.
* math/s_catanh.c (__catanh): Likewise.
* math/s_catanhf.c (__catanhf): Likewise.
* math/s_catanhl.c (__catanhl): Likewise.
* math/s_catanl.c (__catanl): Likewise.
* sysdeps/ieee754/flt-32/e_logf.c (__ieee754_logf): Always divide
by positive zero when computing -Inf result.
* math/libm-test.inc (catan_test): Use ALL_RM_TEST.
(catanh_test): Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch fixes bug 16789, incorrect sign of (real part) zero result
from clog and clog10 in round-downward mode, arising from that real
part being computed as 0 - 0. To ensure that an underflow exception
occurred, the code used an underflowing value (the next term in the
series for log1p) in arithmetic computing the real part of the result,
yielding the problematic 0 - 0 computation in some cases even when the
mathematical result would be small but positive. The patch changes
this code to use the math_force_eval approach to ensuring that an
underflowing computation actually occurs. Tests of clog and clog10
are enabled in all rounding modes.
Tested x86_64 and x86 and ulps updated accordingly.
[BZ #16789]
* math/s_clog.c (__clog): Use math_force_eval to ensure underflow
instead of using underflowing value in computing result.
* math/s_clog10.c (__clog10): Likewise.
* math/s_clog10f.c (__clog10f): Likewise.
* math/s_clog10l.c (__clog10l): Likewise.
* math/s_clogf.c (__clogf): Likewise.
* math/s_clogl.c (__clogl): Likewise.
* math/libm-test.inc (clog_test): Use ALL_RM_TEST.
(clog10_test): Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
Fix for values near a power of two, and some tidies.
[BZ #16739]
* sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c (__nextafterl): Correct
output when value is near a power of two. Use int64_t for lx and
remove casts. Use decimal rather than hex exponent constants.
Don't use long double multiplication when double will suffice.
* math/libm-test.inc (nextafter_test_data): Add tests.
* NEWS: Add 16739 and 16786 to bug list.
This patch fixes the default mode of scalb to set errno (bugs 6803 and
6804).
Previously, the _LIB_VERSION == _SVID_ mode would set errno but only
in some relevant cases, and with various peculiarities (such as errno
setting when an exact infinity or zero result arises with an argument
to scalb being an infinity). This patch leaves this mode
bug-compatible, while making the default mode set errno in accordance
with normal practice (so an exact infinity from an infinite argument
is not an error, and nor is an exact zero result). gen-libm-test.pl
is taught new notation such as ERRNO_PLUS_OFLOW to facilitate writing
the tests of errno setting for underflow / overflow in libm-test.inc.
Note that bug 6803 also covers scalbn and scalbln, but this patch only
addresses the scalb parts of that bug (along with the whole of bug
6804).
Tested x86_64 and x86.
[BZ #6803]
[BZ #6804]
* math/w_scalb.c (__scalb): For non-SVID mode, check result and
set errno as appropriate.
* math/w_scalbf.c (__scalbf): Likewise.
* math/w_scalbl.c (__scalbl): Likewise.
* math/gen-libm-test.pl (parse_args): Handle ERRNO_PLUS_OFLOW,
ERRNO_MINUS_OFLOW, ERRNO_PLUS_UFLOW and ERRNO_MINUS_UFLOW.
* math/libm-test.inc (scalb_test_data): Add errno expectations.
Add more NaN tests.
This patch fixes bug 16349, missing errno setting for atan2 underflow,
by adding appropriate checks to the existing wrappers. (As in other
cases, the __kernel_standard support for calling matherr is considered
to be for existing code expecting existing rules for what's considered
an error, even if those don't correspond to a general logical scheme
for what counts as what kind of error, so __set_errno calls are added
directly without any changes to __kernel_standard.)
Tested x86_64 and x86.
[BZ #16349]
* math/w_atan2.c: Include <errno.h>.
(__atan2): Set errno for result underflowing to zero.
* math/w_atan2f.c: Include <errno.h>.
(__atan2f): Set errno for result underflowing to zero.
* math/w_atan2l.c: Include <errno.h>.
(__atan2l): Set errno for result underflowing to zero.
* math/auto-libm-test-in: Don't allow missing errno for some atan2
tests.
* math/auto-libm-test-out: Regenerated.
This patch fixes bug 16770, spurious "invalid" exceptions from scalb
when testing whether the second argument is an integer, by inserting
appropriate range checks to determine whether a cast to int is safe.
(Note that invalid_fn is a function that handles both nonintegers and
large integers, distinguishing them reliably using functions such as
__rint; note also that there are no issues with scalb needing to avoid
spurious "inexact" exceptions - it's an old-POSIX XSI function, not a
standard C function bound to an IEEE 754 operation - although the
return value is still fully determined.)
Tested x86_64 and x86.
[BZ #16770]
* math/e_scalb.c (__ieee754_scalb): Check second argument is not
too large before casting to int.
* math/e_scalbf.c (__ieee754_scalbf): Likewise.
* math/e_scalbl.c (__ieee754_scalbl): Likewise.
* math/libm-test.inc (scalb_test_data): Add more tests.
This patch fixes the imaginary part of clog10 (-0 +/- 0i), which
should be +/-pi / log(10) by analogy with clog (the functions were
wrongly returning a result with imaginary part +/-pi, same as for
clog, and the tests matched the incorrect result, though both
functions and tests were correct for the similar case of clog10 (-inf
+/- 0i)). Tested x86_64 and x86.
[BZ #16362]
* math/s_clog10.c (M_PI_LOG10E): New macro.
(__clog10): Use M_PI_LOG10E instead of M_PI when real and
imaginary parts are 0.
* math/s_clog10f.c (M_PI_LOG10Ef): New macro.
(__clog10f): Use M_PI_LOG10Ef instead of M_PI when real and
imaginary parts are 0.
* math/s_clog10l.c (M_PI_LOG10El): New macro.
(__clog10l): Use M_PI_LOG10El instead of M_PIl when real and
imaginary parts are 0.
* math/libm-test.inc (clog10_test_data): Update expected results
for when real and imaginary parts are 0.
This patch fixes bug 16348, spurious underflows from x86/x86_64 expl
on arguments close to 0. These implementations effectively use expm1
(on the fractional part of the argument) internally, so resulting in
spurious underflows when the result is very close to 1. For arguments
small enough that the round-to-nearest correct result is 1, this patch
uses 1+x instead.
These implementations are also used for exp10l and so the patch fixes
similar issues there (the 0x1p-67 threshold being small enough to be
correct for exp10l as well as expl). But because of spurious
underflows in other exp10 implementations (bug 16560), the tests
aren't added for exp10 at this point - they can be added when the
other exp10 parts of that bug are fixed.
Tested x86_64 and x86; no ulps updates needed.
[BZ #16348]
* sysdeps/i386/fpu/e_expl.S (IEEE754_EXPL) [!USE_AS_EXPM1L]: Use
1+x for argument with exponent below -67.
* sysdeps/x86_64/fpu/e_expl.S (IEEE754_EXPL) [!USE_AS_EXPM1L]:
Likewise.
* math/auto-libm-test-in: Add more tests of exp.
* math/auto-libm-test-out: Regenerated.
