This patch syncs mktime.c from Gnulib, fixing a
problem reported by Mark Krenz <https://bugs.gnu.org/48085>,
and it should fix BZ#29035 too.
* time/mktime.c (__mktime_internal): Be more generous about
accepting arguments with the wrong value of tm_isdst, by falling
back to a one-hour DST difference if we find no nearby DST that is
unusual. This fixes a problem where "1986-04-28 00:00 EDT" was
rejected when TZ="America/Indianapolis" because the nearest DST
timestamp occurred in 1970, a temporal distance too great for the
old heuristic. This also also narrows the search a bit, which
is a minor performance win.
(cherry picked from commit 83859e1115)
When using a timezone file with a truncated starting time,
generated by the zic in IANA tzcode-2021d a.k.a. tzlib-2021d
(also in tzlib-2021e; current as of this writing), glibc
asserts in __tzfile_read (on e.g. tzset() for this file) and
you may find lines matching "tzfile.c:435: __tzfile_read:
Assertion `num_types == 1' failed" in your syslog.
One example of such a file is the tzfile for Asuncion
generated by tzlib-2021e as follows, using the tzlib-2021e zic:
"zic -d DEST -r @1546300800 -L /dev/null -b slim
SOURCE/southamerica". Note that in its type 2 header, it has
two entries in its "time-types" array (types), but only one
entry in its "transition types" array (type_idxs).
This is valid and expected already in the published RFC8536, and
not even frowned upon: "Local time for timestamps before the
first transition is specified by the first time type (time type
0)" ... "every nonzero local time type index SHOULD appear at
least once in the transition type array". Note the "nonzero ...
index". Until the 2021d zic, index 0 has been shared by the
first valid transition but with 2021d it's separate, set apart
as a placeholder and only "implicitly" indexed. (A draft update
of the RFC mandates that the entry at index 0 is a placeholder
in this case, hence can no longer be shared.)
* time/tzfile.c (__tzfile_read): Don't assert when no transitions
are found.
Co-authored-by: Christopher Wong <Christopher.Wong@axis.com>
(cherry picked from commit c36f64aa6d)
* time/tzfile.c (__tzfile_compute): Fix unlikely off-by-one bug
that accessed before start of an array when an oddball-but-valid
TZif file was queried with an unusual time_t value.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 645277434a)
librt.so is no longer installed for PTHREAD_IN_LIBC, and tests
are not linked against it. $(librt) is introduced globally for
shared tests that need to be linked for both PTHREAD_IN_LIBC
and !PTHREAD_IN_LIBC.
GLIBC_PRIVATE symbols that were needed during the transition are
removed again.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
For the legacy ABI with supports 32-bit time_t it calls the 64-bit
time directly, since the LFS symbols calls the 64-bit time_t ones
internally.
Checked on i686-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
A new build flag, _TIME_BITS, enables the usage of the newer 64-bit
time symbols for legacy ABI (where 32-bit time_t is default). The 64
bit time support is only enabled if LFS (_FILE_OFFSET_BITS=64) is
also used.
Different than LFS support, the y2038 symbols are added only for the
required ABIs (armhf, csky, hppa, i386, m68k, microblaze, mips32,
mips64-n32, nios2, powerpc32, sparc32, s390-32, and sh). The ABIs with
64-bit time support are unchanged, both for symbol and types
redirection.
On Linux the full 64-bit time support requires a minimum of kernel
version v5.1. Otherwise, the 32-bit fallbacks are used and might
results in error with overflow return code (EOVERFLOW).
The i686-gnu does not yet support 64-bit time.
This patch exports following rediretions to support 64-bit time:
* libc:
adjtime
adjtimex
clock_adjtime
clock_getres
clock_gettime
clock_nanosleep
clock_settime
cnd_timedwait
ctime
ctime_r
difftime
fstat
fstatat
futimens
futimes
futimesat
getitimer
getrusage
gettimeofday
gmtime
gmtime_r
localtime
localtime_r
lstat_time
lutimes
mktime
msgctl
mtx_timedlock
nanosleep
nanosleep
ntp_gettime
ntp_gettimex
ppoll
pselec
pselect
pthread_clockjoin_np
pthread_cond_clockwait
pthread_cond_timedwait
pthread_mutex_clocklock
pthread_mutex_timedlock
pthread_rwlock_clockrdlock
pthread_rwlock_clockwrlock
pthread_rwlock_timedrdlock
pthread_rwlock_timedwrlock
pthread_timedjoin_np
recvmmsg
sched_rr_get_interval
select
sem_clockwait
semctl
semtimedop
sem_timedwait
setitimer
settimeofday
shmctl
sigtimedwait
stat
thrd_sleep
time
timegm
timerfd_gettime
timerfd_settime
timespec_get
utime
utimensat
utimes
utimes
wait3
wait4
* librt:
aio_suspend
mq_timedreceive
mq_timedsend
timer_gettime
timer_settime
* libanl:
gai_suspend
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The getdate is basically a wrapper localtime and mktime. The 64-bit
time support is done calling the 64-bit internal functions, there is
no need to add a new symbol version.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The __USE_TIME_BITS64 is not defined internally yet.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The __USE_TIME_BITS64 is not defined internally yet.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The __USE_TIME_BITS64 is not defined internally yet.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
ISO C2X added the asctime_r, ctime_r, gmtime_r and localtime_r
functions from POSIX. It's now removed asctime_r and ctime_r again,
reflecting that they are marked obsolescent in POSIX; update glibc's
time.h accordingly.
The same change that removed those two functions from C2X also marked
asctime and ctime as deprecated (reflecting how POSIX shows them as
obsolescent), i.e. using the [[deprecated]] attribute in the
prototypes shown in C2X. It's less clear if we should explicitly
deprecate those functions like that in the glibc headers; this patch
does nothing regarding such a deprecation (there's no normative
requirement from C2X showing the functions as deprecated).
Tested for x86_64 and x86.
ISO C2X adds a timespec_getres function alongside the C11
timespec_get, with functionality similar to that of POSIX clock_getres
(including allowing a NULL pointer to be passed to the function).
Implement this function for glibc, similarly to the implementation of
timespec_get.
This includes a basic test like that of timespec_get, but no
documentation in the manual, given that TIME_UTC and timespec_get
aren't documented in the manual at all. The handling of 64-bit time
follows that in timespec_get; people maintaining patch series for
64-bit time will need to update them accordingly (to export
__timespec_getres64, redirect calls in time.h and run the test for
_TIME_BITS=64).
Tested for x86_64 and x86, and (previous version; only testcase
differs) with build-many-glibcs.py.
The test is also converted to use libsupport.
Checked on i686-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
This essentially folds compat_symbol_unique functionality into
compat_symbol.
This change eliminates the need for intermediate aliases for defining
multiple symbol versions, for both compat_symbol and versioned_symbol.
Some binutils versions do not suport multiple versions per symbol on
some targets, so aliases are automatically introduced, similar to what
compat_symbol_unique did. To reduce symbol table sizes, a configure
check is added to avoid these aliases if they are not needed.
The new mechanism works with data symbols as well as function symbols,
due to the way an assembler-level redirect is used. It is not
compatible with weak symbols for old binutils versions, which is why
the definition of __malloc_initialize_hook had to be changed. This
is not a loss of functionality because weak symbols do not matter
to dynamic linking.
The placeholder symbol needs repeating in nptl/libpthread-compat.c
now that compat_symbol is used, but that seems more obvious than
introducing yet another macro.
A subtle difference was that compat_symbol_unique made the symbol
global automatically. compat_symbol does not do this, so static
had to be removed from the definition of
__libpthread_version_placeholder.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This code brings test to check if time on target machine is properly set.
To avoid any issues with altering the time:
- The time, which was set before the test was executed is restored.
- The time is altered only when cross-test-ssh.sh is executed with
--allow-time-setting flag
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This code brings test to check if time on target machine is properly set.
To avoid any issues with altering the time:
- The time, which was set before the test was executed is restored.
- The time is altered only when cross-test-ssh.sh is executed with
--allow-time-setting flag
Reviewed-by: DJ Delorie <dj@redhat.com>
This change adds new test to assess mktime's functionality.
To be more specific - following use cases are checked:
- Pass struct tm as epoch time
- Pass struct tm as value just before Y2038 threshold (returned
value shall be 0x7FFFFFFF)
- Pass struct tm as the first value after Y2038 threshold
(expected value - 0x80000000)
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This change adds new test to assess difftime's functionality by
adding some arbitrary offsets to current time_t value (read via
time).
If 64 bit time_t is supported, the same procedure is applied around
the threshold of Y2038 time overflow.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This change adds new test to assess ctime's functionality.
To be more specific - following use cases are checked:
- Pass time_t value as 0 to check if epoch time is converted
- Pass time_t as max value for 32 bit systems
- Pass time_t as the first value after Y2038 threshold
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
The adjtime interface allows return the amount of time remaining
from any previous adjustment that has not yet been completed by
passing a NULL as first argument. This was introduced with y2038
support 0308077e3a.
Checked on i686-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
It does not provide __clock_gettime64, the ftime y2038 support is
moved to a Linux specific implementation.
Checked with a build for i686-linux-gnu and on x86_64-linux and
i686-linux-gnu.
It basically calls the 64-bit __clock_gettime64 and adds the overflow
check.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Starting with the commit 04deeaa9ea
"Fix time/tst-cpuclock1 intermitent failures" (2020-07-11),
this test fails quite often on s390x/s390 with one/multiple of those:
"before - after" / "nanosleep time" / "dead - after" ourside reasonable range.
On a zVM/kvm guest the CPUs are shared between multiple guests.
And even on the lpar (kvm host) the CPUs are usually shared between multiple lpars.
The defined CPUs for a lpar/zVM-system could also have lower weights compared
to other lpars which let the steal time further grow.
Usually I build (-j$(nproc)) and test (PARALLELMFLAGS="-j$(nproc)") glibc multiple
times, e.g. with different GCCs, on various lpars or zVM guests at the same time.
During this time, I've run the test for 13500 times and obvserved the following fails:
~600x "before - after"
~60x "nanosleep time"
~70x "dead - after"
I've also observed a lot of "before - after" fails on a intel kvm-guest while
building/testing glibc on it.
The mentioned commit has tighten the limits of valid tv_nsec ranges:
"before - after" (expected: 500000000):
- 100000000 ... 600000000
+ 450000000 ... 550000000
"nanosleep time" (expected: 100000000):
- 100000000 ... 200000000
+ 090000000 ... 120000000
"dead - after" (expected: 100000000):
- ... 200000000
+ 090000000 ... 120000000
The test itself forks a child process which chew_cpu (user- and kernel-space).
The parent process sleeps with nanosleep(0.5s) and measures the child_clock time:
diff = after - before
With much workload on the machine, the child won't make much progess
and it can fall much beyond the minimum limit.
Afterwards the parent process sleeps with clock_nanosleep (child_clock, 0.1s):
diff = afterns - after
The test currently also allows 0.9 * 0.1s which would be an error.
Depending on the workload, the maximum limit can exceed the 1.2 * 0.1s.
For "dead - after", the parent process kills the child process and waits long
enough to let the child finish dying. Then it gets the time of the child:
diff = dead - after
Note that diff also contains the time for the previous clock_nanosleep.
Thus you'll often see both fails at the same time.
After discussion on the mailing list, we've decided to keep the functional
checks for the clock* functions and remove the timing related checks as those
are prone to false positives.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was made deprecated on 2.31, so it moves to compat symbol after
two releases. It was also removed from exported symbol for riscv32
(since ABI will be supported on for 2.33).
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
It replaces the internal usage of __{f,l}xstat{at}{64} with the
__{f,l}stat{at}{64}. It should not change the generate code since
sys/stat.h explicit defines redirections to internal calls back to
xstat* symbols.
Checked with a build for all affected ABIs. I also check on
x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
This test fails intermittently in systems with heavy load as
CLOCK_PROCESS_CPUTIME_ID is subject to scheduler pressure. Thus the
test boundaries were relaxed to keep it from failing on such systems.
A refactor of the spent time checking was made with some support
functions. With the advantage to representing time jitter in percent
of the target.
The values used by the test boundaries are all empirical.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This patch updates files coming from tzcode to tzcode 2020a.
This is mostly for better support for Internet RFC 8536, by adding
support to zic for the Expires line (new to tzcode 2020a), the -b
option (new to 2019b) and the -r option (new to 2019a).
One trivial change to other glibc was needed.
* time/tzfile.c (__tzfile_read): Adjust to tzcode private.h renaming.
* timezone/private.h, timezone/tzfile.h, timezone/version:
* timezone/zdump.c, timezone/zic.c: Update from tzcode 2020a.
In the glibc project calls to clock_gettime shall be replaced with
__clock_gettime64, which is supporting 64 bit time.
To allow that the __clock_gettime64 needs to be exported as a GLIBC_PRIVATE
symbol.
By undef strong_alias on alpha implementation, the
default_symbol_version macro becomes an empty macro on static build.
It fixes the issue introduced at c953219420.
Checked on alpha-linux-gnu with a 'make check run-built-tests=no'.
It makes alpha no longer reports information about a system-wide
time zone and moves the version logic on the alpha implementation.
Checked on a build and check-abi for alpha-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
C2X adds the asctime_r, ctime_r, gmtime_r and localtime_r functions.
This patch duly adds __GLIBC_USE (ISOC2X) to the conditions under
which <time.h> declares them.
Tested for x86_64.
The generic version is straightforward. For Hurd, its nanosleep
implementation is moved to clock_nanosleep with adjustments from
generic unix implementation.
The generic clock_nanosleep unix version is also removed since
it calls nanosleep.
Checked on x86_64-linux-gnu and powerpc64le-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Checked on x86_64-linux-gnu and powerpc64le-linux-gnu. I also checked
the libpthread.so .gnu.version_d entries for every ABI affected and
all of them contains the required versions (including for architectures
which exports __nanosleep with a different version).
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Also make the public prototype of gettimeofday declare its second
argument with type "void *" unconditionally, consistent with POSIX.
It is also consistent with POSIX.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Consolidate generic gettimeofday implementation to use clock_gettime.
Linux ports that still provide gettimeofday through vDSO are not
changed.
Remove sysdeps/unix/clock_gettime.c, which implemented clock_gettime
using gettimeofday; new OS ports must provide a real implementation of
clock_gettime.
Rename sysdeps/mach/gettimeofday.c to sysdeps/mach/clock_gettime.c and
convert into an implementation of clock_gettime. It only supports
CLOCK_REALTIME; Mach does not appear to have any support for monotonic
clocks. It uses __host_get_time, which provides at best microsecond
resolution. Hurd is currently using sysdeps/posix/clock_getres.c for
clock_getres; its output for CLOCK_REALTIME is based on
sysconf (_SC_CLK_TCK), and I do not know whether that gives the
correct result.
Unlike settimeofday, there are no known uses of gettimeofday's
vestigial "get time zone" feature that are not bugs. (The per-process
timezone support in localtime and friends is unrelated, and the
programs that set the kernel's offset between the hardware clock and
UTC do not need to read it back.) Therefore, this feature is dummied
out. Henceforth, if gettimeofday's "struct timezone" argument is not
NULL, it will write zeroes to both fields. Any program that is
actually looking at this data will thus think it is running in UTC,
which is probably more correct than whatever it was doing before.
[__]gettimeofday no longer has any internal callers, so we can now
remove its internal prototype and PLT bypass aliases. The
__gettimeofday@GLIBC_2.0 export remains, in case it is used by any
third-party code.
It also allows to simplify the arch-specific implementation on x86 and
powerpc to remove the hack to disable the internal route to non iFUNC
variant for internal symbol.
This patch also fixes a missing optimization on aarch64, powerpc, and
x86 where the code used on static build do not use the vDSO.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Co-authored-by: Zack Weinberg <zackw@panix.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
timespec_get is the same function as clock_gettime, with an obnoxious
coating of NIH painted on it by the ISO C committee. In addition to
the rename, it takes its arguments in a different order, it returns 0
on *failure* or a positive number on *success*, and it requires that
all of its TIME_* constants be positive. This last means we cannot
directly reuse the existing CLOCK_* constants for it, because
those have been allocated starting with CLOCK_REALTIME = 0 on all
existing platforms.
This patch simply promotes the sysdeps/posix implementation to
universal, and removes the Linux-specific implementation, whose
apparent reason for existing was to cut out one function call's worth
of overhead.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
ftime is an obsolete variation on gettimeofday, offering only
millisecond time resolution; it was probably a system call in ooold
versions of BSD Unix. For historic reasons, we had three
implementations of it. These are all consolidated into time/ftime.c,
and then the function is deprecated.
For some reason, the implementation of ftime in terms of gettimeofday
was rounding rather than truncating microseconds to milliseconds. In
all the other places where we use a higher-resolution time function to
implement a lower-resolution one, we truncate. ftime is changed to
match, just for tidiness' sake.
Like gettimeofday, ftime tries to report the time zone, and using that
information is always a bug. This patch dummies out the reported
timezone information; the timezone and dstflag fields of the
returned "struct timeb" will always be zero.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, and powerpc-linux-gnu.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
As for gettimeofday, time will be implemented based on clock_gettime
on all platforms and internal code should use clock_gettime
directly. In addition to removing a layer of indirection, this will
allow us to remove the PLT-bypass gunk for gettimeofday.
The changed code always assumes __clock_gettime (CLOCK_REALTIME)
or __clock_gettime (CLOCK_REALTIME_COARSE) (for Linux case) cannot
fail, using the same rationale for gettimeofday change. And internal
helper was added (time_now).
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, and powerpc-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Change the default implementation of time to call clock_gettime,
to align with new Linux ports that are expected to only implement
__NR_clock_gettime. Arch-specific implementation that either call
the time vDSO or route to gettimeofday vDSO are not removed.
Also for Linux, CLOCK_REALTIME_COARSE is used instead of generic
CLOCK_REALTIME clockid. This takes less CPU time and its behavior
better matches what the current glibc does.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Co-authored-by: Zack Weinberg <zackw@panix.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
