I think the last clause of the conditional,
|| __n <= __bos (__dest)
may be backward. The code should call the runtime-checking function
if __n is not constant, or if __n is known to be LARGER than the size
of the destination.
Various fma implementations have logic that, when computing fma (x, y,
z) where z is large (so care needs taking to avoid internal overflow)
but x * y is small, scale x * y up instead of down to avoid internal
underflows resulting from scaling down. (In these cases, x * y is
small enough that only its sign actually matters rather than the exact
value.)
The threshold for scaling up instead of down was correct for "if the
unscaled values were multiplied, the low part of the multiplication
could underflow", and the scaling was sufficient to ensure that the
low part of the multiplication did not underflow (given that cases of
very small x * y - less than half the least subnormal - were
previously dealt with). However, the choice in the functions wasn't
between scaling up or no scaling, but between scaling up and scaling
down (scaling down actually being needed when x * y isn't so small
compared to z and so the exact value does matter). Thus a larger
threshold is needed to ensure that scaling down doesn't produce values
the multiplication of whose low parts underflows. This patch
increases the thresholds accordingly.
Tested for x86_64, x86 and mips64 (with the MIPS version of s_fmal.c
removed so that the ldbl-128 version gets tested instead of the
soft-fp one).
[BZ #18824]
* sysdeps/ieee754/dbl-64/s_fma.c (__fma): Increase threshold for
scaling x * y up instead of down.
* sysdeps/ieee754/ldbl-128/s_fmal.c (__fmal): Likewise.
* sysdeps/ieee754/ldbl-96/s_fmal.c (__fmal): Likewise.
* math/auto-libm-test-in: Add more tests of fma.
* math/auto-libm-test-out: Regenerated.
The change in 0b5395f052 replaced calls
to __get_cpu_features@plt followed by a mov from rax to rdx, with a
single macro LOAD_RTLD_GLOBAL_RO_RDX. It is pretty clear that there
was a typo in s_floorf and __nearbyint due to which the (now incorrect)
mov was not removed. This patch removes that mov.
* sysdeps/x86_64/fpu/multiarch/s_floorf.S (__floorf): Remove
unnecessary movq.
* sysdeps/x86_64/fpu/multiarch/s_nearbyint.S (__nearbyint):
Likewise.
This patch adds more test inputs to various libm functions found
through random generation to have larger ulps errors than previously
listed in libm-test-ulp, on at least one of x86_64 and x86.
Tested for x86_64 and x86.
* math/auto-libm-test-in: Add more tests of acos, acosh, asin,
asinh, atan, atan2, atanh, cabs, cbrt, cosh, csqrt, erf, erfc,
exp, exp2, lgamma, log, log1p, log2, pow, sin, sincos, tan, tanh
and tgamma.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
Similar to various other bugs in this area, some tanh implementations
do not raise the underflow exception for subnormal arguments, when the
result is tiny and inexact. This patch forces the exception in a
similar way to previous fixes.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #16520]
* sysdeps/ieee754/dbl-64/s_tanh.c: Include <float.h>.
(__tanh): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/flt-32/s_tanhf.c: Include <float.h>.
(__tanhf): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/ldbl-128/s_tanhl.c: Include <float.h>.
(__tanhl): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/ldbl-128ibm/s_tanhl.c: Include <float.h>.
(__tanhl): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/ldbl-96/s_tanhl.c: Include <float.h>.
(__tanhl): Force underflow exception for arguments with small
absolute value.
* math/auto-libm-test-in: Add more tests of tanh.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
Since not all i486 processors support cpuid, we call __get_cpuid_max to
check if cpuid is available before using it if not compiling for i586,
i686 nor x86-64.
* sysdeps/x86/cpu-features.c (init_cpu_features): Call
__get_cpuid_max if not compiling for i586, i686 nor x86-64.
This patch updates x86 elision-conf.c to use the newly defined
HAS_CPU_FEATURE from <cpu-features.h>.
* sysdeps/unix/sysv/linux/x86/elision-conf.c (elision_init):
Replace HAS_RTM with HAS_CPU_FEATURE (RTM).
When building with --disable-multi-arch the memmove and strstr POWER7
optimization create and uses symbols that conflict with expect conform
tests.
* sysdeps/powerpc/powerpc64/power7/memmove.S (bcopy): Changing to
__bcopy and add a weak_alias to bcopy.
* sysdeps/powerpc/powerpc64/power7/strstr.S (strstr): Use __strnlen
for static build.
This patches uses the default strcpy/stpcpy implementation for
POWER7/PPC64. This is faster in mostly inputs for benchtests
and for multiarch the implementation uses the POWER7 strlen and
memcpy.
* string/stpcpy.c (__stpcpy): Use STPCPY to redefine symbol name and
cleanup macro usage.
* string/strcpy.c (strcpt): Use STRCPY to redefine symbol name.
* sysdeps/powerpc/powerpc64/multiarch/stpcpy-power7.S: Remove file.
* sysdeps/powerpc/powerpc64/multiarch/stpcpy-ppc64.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strcpy-power7.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strcpy-ppc64.S: Likewise.
* sysdeps/powerpc/powerpc64/power7/stpcpy.S: Likewise.
* sysdeps/powerpc/powerpc64/power7/strcpy.S: Likewise.
* sysdeps/powerpc/powerpc64/power7/strcpy.c: Likewise.
* sysdeps/powerpc/powerpc64/stpcpy.S: Likewise.
* sysdeps/powerpc/powerpc64/strcpy.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/stpcpy.c
[SHARED && IS_IN (libc)]: Include <string/strcpy.c>.
* sysdeps/powerpc/powerpc64/multiarch/stpcpy.c
[SHARED && IS_IN (libc)]: Include <string/stpcpy.c>.
* sysdeps/powerpc/powerpc64/multiarch/stpcpy-power7.c: New file.
* sysdeps/powerpc/powerpc64/multiarch/stpcpy-ppc64.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strcpy-power7.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strcpy-ppc64.c: Likewise.
* sysdeps/powerpc/powerpc64/power7/strcpy.c: Likewise.
This patch fixes the strstr build with --disable-multi-arch option.
The optimization calls the __strstr_ppc symbol, which always build
for multiarch config but not if it is disable. This patch fixes it
by adding the default C implementation object with the expected
symbol name.
* sysdeps/powerpc/powerpc64/power7/Makefile [$(subdir) = string]
(sysdep_routines): Add strstr-ppc64.
* sysdeps/powerpc/powerpc64/power7/strstr-ppc64.c: New file.
https://sourceware.org/bugzilla/show_bug.cgi?id=18778
If dlopen fails to load an object that has triggered loading libpthread it
causes ld.so to unload libpthread because its DF_1_NODELETE flags has been
forcefully cleared. The next call to __rtdl_unlock_lock_recursive will crash
since pthread_mutex_unlock no longer exists.
This patch moves l->l_flags_1 &= ~DF_1_NODELETE out of loop through all loaded
libraries and performs the action only on inconsistent one.
[BZ #18778]
* elf/Makefile (tests): Add Add tst-nodelete2.
(modules-names): Add tst-nodelete2mod.
(tst-nodelete2mod.so-no-z-defs): New.
($(objpfx)tst-nodelete2): Likewise.
($(objpfx)tst-nodelete2.out): Likewise.
(LDFLAGS-tst-nodelete2): Likewise.
* elf/dl-close.c (_dl_close_worker): Move DF_1_NODELETE clearing
out of loop through all loaded libraries.
* elf/tst-nodelete2.c: New file.
* elf/tst-nodelete2mod.c: Likewise.
This patch adds more tests of various libm functions found through
random test generation to give increased ulps on 32-bit x86.
Tested for x86_64 and x86.
* math/auto-libm-test-in: Add more tests of acosh, asin, asinh,
atanh, cabs, carg, cbrt, cosh, csqrt, erf, erfc, exp, exp10,
expm1, hypot, log, log10, log1p, log2, pow, sinh, tan and tgamma.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
ldbl-128ibm tanhl uses a too-small threshold to decide when to return
+/-1, resulting in large errors. This patch changes it to a more
appropriate threshold (the requirement is for 2*exp(-2|x|) to be small
in terms of ulps of 1).
Tested for x86_64, x86 and powerpc.
[BZ #18790]
* sysdeps/ieee754/ldbl-128ibm/s_tanhl.c (__tanhl): Increase
threshold for returning +/- 1.
* math/auto-libm-test-in: Add more tests of tanh.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
ldbl-128ibm sinhl uses a too-big threshold to decide when to return
the argument, resulting in large errors. This patch fixes it to use a
more appropriate threshold.
Tested for x86_64, x86 and powerpc.
[BZ #18789]
* sysdeps/ieee754/ldbl-128ibm/e_sinhl.c (__ieee754_sinhl): Use
smaller threshold for returning the argument.
* math/auto-libm-test-in: Add more tests of sinh.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
The third arg can either be a string with "g" or "G", or it is a number.
The empty string elicits a warning with newer versions like so:
gawk: scripts/sysd-rules.awk:56: warning: gensub: third argument `' treated as 1
These scripts use #!/bin/sh explicitly, so make sure they avoid echo -n
as different shells treat it differently. Use the portable printf func
instead.
No other arch exports these defines, and having them in the default
namespace causes conformance header tests to fail. Put them behind
the __USE_MISC define as that is what other arches seem to use.
The attached change fixes the miscompilation of sched_setaffinity() on
hppa. This is an old problem that was fixed on other architectures using
a similar approach to the attached change. See:
https://sourceware.org/ml/libc-hacker/2004-04/msg00016.html
Build tested on trunk. Patch has been applied to debian glibc for some time.
As noted in the bug, the asm operands need to be copied to register
variables to avoid operand reloads in the principal asm of the macro.
See the arm implementation for reference. Otherwise we get:
../sysdeps/unix/sysv/linux/hppa/bits/atomic.h:68:6: error:
can't find a register in class 'R1_REGS' while reloading 'asm'
Build tested on trunk with gcc-4.8. Similar patch has been tested
with 2.19 on Debian hppa-unknown-linux-gnu.
The semi-recent SYSCALL_CANCEL inclusion broke microblaze due to the
sysdep.h header not including the unix/sysdep.h header. Include it
here like all other ports.
Similar to various other bugs in this area, some tan implementations
do not raise the underflow exception for subnormal arguments, when the
result is tiny and inexact. This patch forces the exception in a
similar way to previous fixes.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #16517]
* sysdeps/ieee754/dbl-64/s_tan.c: Include <float.h>.
(tan): Force underflow exception for arguments with small absolute
value.
* sysdeps/ieee754/flt-32/k_tanf.c: Include <float.h>.
(__kernel_tanf): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/ldbl-128/k_tanl.c: Include <float.h>.
(__kernel_tanl): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/ldbl-128ibm/k_tanl.c: Include <float.h>.
(__kernel_tanl): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/ldbl-96/k_tanl.c: Include <float.h>.
(__kernel_tanl): Force underflow exception for arguments with
small absolute value.
* math/auto-libm-test-in: Add more tests of tan.
* math/auto-libm-test-out: Regenerated.
Commit 2a6ad8142d updated the headers and
the common dl-symaddr.c, but missed that hppa has its own dedicated source
file for this func. Update that too to fix build errors due to missing
exports of the symbol.
When static-start-installed-name is different from
start-installed-name, we must not use the shared objects.
* csu/Makefile
(extra-objs): Add gmon-start.o when building shared library and
$(static-start-installed-name) is different from
$(start-installed-name).
$(objpfx)g$(static-start-installed-name): When building shared
library and $(static-start-installed-name) is different from
$(static-start-installed-name), revert to non-shared rule,
i.e. using $(objpfx)% and gmon-start.o.
Similar to various other bugs in this area, some sinh implementations
do not raise the underflow exception for subnormal arguments, when the
result is tiny and inexact. This patch forces the exception in a
similar way to previous fixes.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #16519]
* sysdeps/ieee754/dbl-64/e_sinh.c: Include <float.h>.
(__ieee754_sinh): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/flt-32/e_sinhf.c: Include <float.h>.
(__ieee754_sinhf): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/ldbl-128/e_sinhl.c: Include <float.h>.
(__ieee754_sinhl): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/ldbl-128ibm/e_sinhl.c: Include <float.h>.
(__ieee754_sinhl): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/ldbl-96/e_sinhl.c: Include <float.h>.
(__ieee754_sinhl): Force underflow exception for arguments with
small absolute value.
* math/auto-libm-test-in: Add more tests of sinh.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
This file uses isspace but doesn't include ctype.h leading to:
isomac.c: In function 'get_null_defines':
isomac.c:305:30: warning: implicit declaration of function 'isspace' [-Wimplicit-function-declaration]
for (end = start + 1; !isspace (*end) && *end != '\0'; ++end)
These tests were skipped by the use-test-skeleton conversion done in
commit 29955b5d because they did not have an `int main (void)'
declaration. Instead their `main' functions were declared with arguments
(i.e. argc, argv) even though they didn't use them.
Remove these arguments and include the test skeleton in these tests.
