5bf07e1b3a ("Linux: Simplify __opensock and fix race condition [BZ #28353]")
made __opensock try NETLINK then UNIX then INET. On the Hurd, only INET
knows about network interfaces, so better actually specify that in
if_index.
(cherry picked from commit 1d3decee99)
AF_NETLINK support is not quite optional on modern Linux systems
anymore, so it is likely that the first attempt will always succeed.
Consequently, there is no need to cache the result. Keep AF_UNIX
and the Internet address families as a fallback, for the rare case
that AF_NETLINK is missing. The other address families previously
probed are totally obsolete be now, so remove them.
Use this simplified version as the generic implementation, disabling
Netlink support as needed.
(cherry picked from commit 5bf07e1b3a)
Pass the actual number of bytes returned by the kernel.
Fixes: 33099d72e4 ("linux: Simplify get_nprocs")
Reviewed-by: Dmitry V. Levin <ldv@altlinux.org>
(cherry picked from commit 97ba273b50)
time_t size is defined by __TIMESIZE, not __WORDSIZE. Check __TIMESIZE,
instead of __WORDSIZE, for time_t size. This fixes BZ #28837.
(cherry pick from commit 77a602ebb0)
The timestamps created by __convert_scm_timestamps only make sense for
64 bit time_t programs, 32 bit time_t programs will ignore 64 bit time_t
timestamps since SO_TIMESTAMP will be defined to old values (either by
glibc or kernel headers).
Worse, if the buffer is not suffice MSG_CTRUNC is set to indicate it
(which breaks some programs [1]).
This patch makes only 64 bit time_t recvmsg and recvmmsg to call
__convert_scm_timestamps. Also, the assumption to called it is changed
from __ASSUME_TIME64_SYSCALLS to __TIMESIZE != 64 since the setsockopt
might be called by libraries built without __TIME_BITS=64. The
MSG_CTRUNC is only set for the 64 bit symbols, it should happen only
if 64 bit time_t programs run older kernels.
Checked on x86_64-linux-gnu and i686-linux-gnu.
[1] https://github.com/systemd/systemd/pull/20567
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit 948ce73b31)
The __convert_scm_timestamps only updates the control message last
pointer for SOL_SOCKET type, so if the message control buffer contains
multiple ancillary message types the converted timestamp one might
overwrite a valid message.
The test checks if the extra ancillary space is correctly handled
by recvmsg/recvmmsg, where if there is no extra space for the 64-bit
time_t converted message the control buffer should be marked with
MSG_TRUNC. It also check if recvmsg/recvmmsg handle correctly multiple
ancillary data.
Checked on x86_64-linux and on i686-linux-gnu on both 5.11 and
4.15 kernel.
Co-authored-by: Fabian Vogt <fvogt@suse.de>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit 8fba672472)
Check if the socket support 64-bit network packages timestamps
(SO_TIMESTAMP and SO_TIMESTAMPNS). This will be used on recvmsg
and recvmmsg tests to check if the timestamp should be generated.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from 38bc0f4e78)
The glibc 2.34 release really should have added a GLIBC_2.34
symbol to the dynamic loader. With it, we could move functions such
as dlopen or pthread_key_create that work on process-global state
into the dynamic loader (once we have fixed a longstanding issue
with static linking). Without the GLIBC_2.34 symbol, yet another
new symbol version would be needed because old glibc will fail to
load binaries due to the missing symbol version in ld.so that newly
linked programs will require.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit af121ae3e7)
Fixes [BZ# 28755] for wcsncmp by redirecting length >= 2^56 to
__wcscmp_evex. For x86_64 this covers the entire address range so any
length larger could not possibly be used to bound `s1` or `s2`.
test-strcmp, test-strncmp, test-wcscmp, and test-wcsncmp all pass.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
(cherry picked from commit 7e08db3359)
Fixes [BZ# 28755] for wcsncmp by redirecting length >= 2^56 to
__wcscmp_avx2. For x86_64 this covers the entire address range so any
length larger could not possibly be used to bound `s1` or `s2`.
test-strcmp, test-strncmp, test-wcscmp, and test-wcsncmp all pass.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
(cherry picked from commit ddf0992cf5)
Otherwise the test fails with certain container runtimes.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
(cherry picked from commit 5b8e7980c5)
Set errno and failure for paths that are too long only if no other error
occurred earlier.
Related: BZ #28770
Reviewed-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
(cherry picked from commit 84d2d0fe20)
No valid path returned by getcwd would fit into 1 byte, so reject the
size early and return NULL with errno set to ERANGE. This change is
prompted by CVE-2021-3999, which describes a single byte buffer
underflow and overflow when all of the following conditions are met:
- The buffer size (i.e. the second argument of getcwd) is 1 byte
- The current working directory is too long
- '/' is also mounted on the current working directory
Sequence of events:
- In sysdeps/unix/sysv/linux/getcwd.c, the syscall returns ENAMETOOLONG
because the linux kernel checks for name length before it checks
buffer size
- The code falls back to the generic getcwd in sysdeps/posix
- In the generic func, the buf[0] is set to '\0' on line 250
- this while loop on line 262 is bypassed:
while (!(thisdev == rootdev && thisino == rootino))
since the rootfs (/) is bind mounted onto the directory and the flow
goes on to line 449, where it puts a '/' in the byte before the
buffer.
- Finally on line 458, it moves 2 bytes (the underflowed byte and the
'\0') to the buf[0] and buf[1], resulting in a 1 byte buffer overflow.
- buf is returned on line 469 and errno is not set.
This resolves BZ #28769.
Reviewed-by: Andreas Schwab <schwab@linux-m68k.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Qualys Security Advisory <qsa@qualys.com>
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
(cherry picked from commit 23e0e8f5f1)
Define PATH_MAX to a constant if it isn't already defined, like in hurd.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
(cherry picked from commit 976db046bc)
realpath returns an allocated string when the result exceeds PATH_MAX,
which is unexpected when its second argument is not NULL. This results
in the second argument (resolved) being uninitialized and also results
in a memory leak since the caller expects resolved to be the same as the
returned value.
Return NULL and set errno to ENAMETOOLONG if the result exceeds
PATH_MAX. This fixes [BZ #28770], which is CVE-2021-3998.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
(cherry picked from commit ee8d5e33ad)
Add new helpers support_create_and_chdir_toolong_temp_directory and
support_chdir_toolong_temp_directory to create and descend into
directory trees longer than PATH_MAX.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
(cherry picked from commit fb7bff12e8)
Recent versions of binutils (with commit
b25f942e18d6ecd7ec3e2d2e9930eb4f996c258a) stopped preserving "sticky"
options across a base `.machine` directive, nullifying the use of
passing "-many" through GCC to the assembler. As a result, some
instructions which were recognized even under older, more stringent
`.machine` directives become unrecognized instructions in that
context.
In `sysdeps/powerpc/tst-set_ppr.c`, the use of the `mfppr32` extended
mnemonic became unrecognized, as the default compilation with GCC for
32bit powerpc adds a `.machine ppc` in the resulting assembly, so the
command line option `-Wa,-many` is essentially ignored, and the ISA 2.06
instructions and mnemonics, like `mfppr32`, are unrecognized.
The compilation of `sysdeps/powerpc/tst-set_ppr.c` fails with:
Error: unrecognized opcode: `mfppr32'
Add appropriate `.machine` directives in the assembly to bracket the
`mfppr32` instruction.
Part of a 2019 fix (commit 9250e6610f) to
the above test's Makefile to add `-many` to the compilation when GCC
itself stopped passing `-many` to the assember no longer has any effect,
so remove that.
Reported-by: Joseph Myers <joseph@codesourcery.com>
(cherry picked from commit ee874f44fd)
In some cases (e.g QEMU, non-Intel/AMD CPU) the cache information can
not be retrieved and the corresponding values are set to 0.
Commit 2d651eb926 ("x86: Move x86 processor cache info to
cpu_features") changed the behaviour in such case by defining the
__x86_shared_cache_size and __x86_data_cache_size variables to 0 instead
of using the default values. This cause an issue with the i686 SSE2
optimized bzero/routine which assumes that the cache size is at least
128 bytes, and otherwise tries to zero/set the whole address space minus
128 bytes.
Fix that by restoring the original code to only update
__x86_shared_cache_size and __x86_data_cache_size variables if the
corresponding cache sizes are not zero.
Fixes bug 28784
Fixes commit 2d651eb926
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit c242fcce06)
The sunrpc function svcunix_create suffers from a stack-based buffer
overflow with overlong pathname arguments.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
(cherry picked from commit f545ad4928)
Processing an overlong pathname in the sunrpc clnt_create function
results in a stack-based buffer overflow.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
(cherry picked from commit 226b46770c)
With gdb-11.1-6.fc35.x86_64, I got
FAIL: nptl/test-cond-printers
FAIL: nptl/test-condattr-printers
FAIL: nptl/test-mutex-printers
FAIL: nptl/test-mutexattr-printers
FAIL: nptl/test-rwlock-printers
FAIL: nptl/test-rwlockattr-printers
$ cat nptl/test-condattr-printers.out
Error: Response does not match the expected pattern.
Command: start
Expected pattern: main
Response: Temporary breakpoint 1 at 0x11d5: file test-condattr-printers.c, line 43.
Starting program: /export/build/gnu/tools-build/glibc-cet-gitlab/build-x86_64-linux/nptl/test-condattr-printers
This GDB supports auto-downloading debuginfo from the following URLs:
https://debuginfod.fedoraproject.org/
Enable debuginfod for this session? (y or [n])
Disable debuginfod to avoid GDB messages. This fixes BZ #28757.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit 7de501f941)
Linux 5.16 has one new syscall, futex_waitv. Update
syscall-names.list and regenerate the arch-syscall.h headers with
build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
(cherry picked from commit 4997a533ae)
The configure check for CAN_USE_REGISTER_ASM_EBP tried to compile a
simple function that uses %ebp as an inline assembly operand. If
compilation failed, CAN_USE_REGISTER_ASM_EBP was set 0, which
eventually had these consequences:
(1) %ebx was avoided as an inline assembly operand, with an
assembler macro hack to avoid unnecessary register moves.
(2) %ebp was avoided as an inline assembly operand, using an
out-of-line syscall function for 6-argument system calls.
(1) is no longer needed for any GCC version that is supported for
building glibc. %ebx can be used directly as a register operand.
Therefore, this commit removes the %ebx avoidance completely. This
avoids the assembler macro hack, which turns out to be incompatible
with the current Systemtap probe macros (which switch to .altmacro
unconditionally).
(2) is still needed in many build configurations. The existing
configure check cannot really capture that because the simple function
succeeds to compile, while the full glibc build still fails.
Therefore, this commit removes the check, the CAN_USE_REGISTER_ASM_EBP
macro, and uses the out-of-line syscall function for 6-argument system
calls unconditionally.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit a78e6a10d0)
Linux 5.15 has one new syscall, process_mrelease (and also enables the
clone3 syscall for RV32). It also has a macro __NR_SYSCALL_MASK for
Arm, which is not a syscall but matches the pattern used for syscall
macro names.
Add __NR_SYSCALL_MASK to the names filtered out in the code dealing
with syscall lists, update syscall-names.list for the new syscall and
regenerate the arch-syscall.h headers with build-many-glibcs.py
update-syscalls.
Tested with build-many-glibcs.py.
(cherry picked from commit 3387c40a8b)
Recent binutils commit b25f942e18d6ecd7ec3e2d2e9930eb4f996c258a
changes the behavior of `.machine` directives to override, rather
than augment, the base CPU. This can result in _reduced_ functionality
when, for example, compiling for default machine "power8", but explicitly
asking for ".machine power5", which loses Altivec instructions.
In tst-ucontext-ppc64-vscr.c, while the instructions provoking the new
error messages are bracketed by ".machine power5", which is ostensibly
Power ISA 2.03 (POWER5), the POWER5 processor did not support the
VSX subset, so these instructions are not recognized as "power5".
Error: unrecognized opcode: `vspltisb'
Error: unrecognized opcode: `vpkuwus'
Error: unrecognized opcode: `mfvscr'
Error: unrecognized opcode: `stvx'
Manually adding the VSX subset via ".machine altivec" is sufficient.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
(cherry picked from commit 064b475a2e)
This test-case is the tzfile for Asuncion generated by
tzlib-2021e as follows, using the tzlib-2021e zic: "zic -d
DEST -r @1546300800 -L /dev/null -b slim
SOURCE/southamerica". Note that in its type 2 header, it
has two entries in its "time-types" array (types), but only
one entry in its "transition types" array (type_idxs).
* timezone/Makefile, timezone/tst-pr28707.c,
timezone/testdata/gen-XT5.sh: New test.
Co-authored-by: Christopher Wong <Christopher.Wong@axis.com>
(cherry picked from commit ebe899af0d)
When using a timezone file with a truncated starting time,
generated by the zic in IANA tzcode-2021d a.k.a. tzlib-2021d
(also in tzlib-2021e; current as of this writing), glibc
asserts in __tzfile_read (on e.g. tzset() for this file) and
you may find lines matching "tzfile.c:435: __tzfile_read:
Assertion `num_types == 1' failed" in your syslog.
One example of such a file is the tzfile for Asuncion
generated by tzlib-2021e as follows, using the tzlib-2021e zic:
"zic -d DEST -r @1546300800 -L /dev/null -b slim
SOURCE/southamerica". Note that in its type 2 header, it has
two entries in its "time-types" array (types), but only one
entry in its "transition types" array (type_idxs).
This is valid and expected already in the published RFC8536, and
not even frowned upon: "Local time for timestamps before the
first transition is specified by the first time type (time type
0)" ... "every nonzero local time type index SHOULD appear at
least once in the transition type array". Note the "nonzero ...
index". Until the 2021d zic, index 0 has been shared by the
first valid transition but with 2021d it's separate, set apart
as a placeholder and only "implicitly" indexed. (A draft update
of the RFC mandates that the entry at index 0 is a placeholder
in this case, hence can no longer be shared.)
* time/tzfile.c (__tzfile_read): Don't assert when no transitions
are found.
Co-authored-by: Christopher Wong <Christopher.Wong@axis.com>
(cherry picked from commit c36f64aa6d)
* time/tzfile.c (__tzfile_compute): Fix unlikely off-by-one bug
that accessed before start of an array when an oddball-but-valid
TZif file was queried with an unusual time_t value.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 645277434a)
bison-3.8 includes these lines in the generated intl/plural.c:
#if !defined __gettexterror && !defined YYERROR_IS_DECLARED
void __gettexterror (struct parse_args *arg, const char *msg);
#endif
#if !defined __gettextlex && !defined YYLEX_IS_DECLARED
int __gettextlex (YYSTYPE *yylvalp, struct parse_args *arg);
#endif
Those default prototypes provided by bison conflict with the
declarations later on in plural.y. This patch solves the issue.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
(cherry picked from commit c6d7d6312c)
When the clock_id is CLOCK_PROCESS_CPUTIME_ID or CLOCK_THREAD_CPUTIME_ID,
on the 5.10 kernel powerpc 32-bit, the 32-bit vDSO is executed successfully (
because the __kernel_clock_gettime in arch/powerpc/kernel/vdso32/gettimeofday.S
does not support these two IDs, the 32-bit time_t syscall will be used),
but tp32.tv_sec is equal to 0, causing the 64-bit time_t syscall to continue to be used,
resulting in two system calls.
Fix commit 72e84d1db2.
Signed-off-by: maminjie <maminjie2@huawei.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit e0fc721ce6)
It turned that the generic implementation of brk() does not work
for sparc, since on failure kernel will just return the previous
input value without setting the conditional register.
This patches adds back a sparc32 and sparc64 implementation removed
by 720480934a.
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
(cherry picked from commit 5b86241a03)
Align the stack pointer to 128 bits during the call to _dl_init() as
specified by the RISC-V ABI [1]. This fixes the elf/tst-align2 test.
Fixes bug 28703.
[1] https://github.com/riscv-non-isa/riscv-elf-psabi-doc
(cherry picked from commit 225da459ce)
The RISC-V ABI [1] mandates that "the stack pointer shall be aligned to
a 128-bit boundary upon procedure entry". This as not the case in clone.
This fixes the misc/tst-misalign-clone-internal and
misc/tst-misalign-clone tests.
Fixes bug 28702.
[1] https://github.com/riscv-non-isa/riscv-elf-psabi-doc
(cherry picked from commit d2e594d715)
The syscall function does not allocate the extra stack frame for scv like other
assembly syscalls using DO_CALL_SCV. So after commit d120fb9941 changed the
offset that is used to save LR, syscall ended up using an invalid offset,
causing regressions on powerpc64. So make sure the extra stack frame is
allocated in syscall.S as well to make it consistent with other uses of
DO_CALL_SCV and avoid similar issues in the future.
Tested on powerpc, powerpc64, and powerpc64le (with and without scv)
Reviewed-by: Raphael M Zinsly <rzinsly@linux.ibm.com>
(cherry picked from commit ae91d3df24)
On KVM guests running on some AMD systems, the IBRS feature is reported
as a synthetic feature using the Intel feature, while the cpuinfo entry
keeps the same. Handle that by first checking the presence of the Intel
feature on AMD systems.
Fixes bug 28704.
(cherry picked from commit 94058f6cde)
This matches what is currently in nss/nsswitch.conf. The new ordering
matches what most distributions use in their installed configuration
files.
It is common to add localhost to /etc/hosts because the name does not
exist in the DNS, but is commonly used as a host name.
With the built-in "dns [!UNAVAIL=return] files" default, dns is
searched first and provides an answer for "localhost" (NXDOMAIN).
We never look at the files database as a result, so the contents of
/etc/hosts is ignored. This means that "getent hosts localhost"
fail without a /etc/nsswitch.conf file, even though the host name
is listed in /etc/hosts.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit b99b0f93ee)
