mirror of
https://sourceware.org/git/glibc.git
synced 2024-11-27 07:20:11 +00:00
d8742dd82f
434 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Joseph Myers
|
d8742dd82f |
Add narrowing add functions.
This patch adds the narrowing add functions from TS 18661-1 to glibc's libm: fadd, faddl, daddl, f32addf64, f32addf32x, f32xaddf64 for all configurations; f32addf64x, f32addf128, f64addf64x, f64addf128, f32xaddf64x, f32xaddf128, f64xaddf128 for configurations with _Float64x and _Float128; __nldbl_daddl for ldbl-opt. As discussed for the build infrastructure patch, tgmath.h support is deliberately deferred, and FP_FAST_* macros are not applicable without optimized function implementations. Function implementations are added for all relevant pairs of formats (including certain cases of a format and itself where more than one type has that format). The main implementations use round-to-odd, or a trivial computation in the case where both formats are the same or where the wider format is IBM long double (in which case we don't attempt to be correctly rounding). The sysdeps/ieee754/soft-fp implementations use soft-fp, and are used automatically for configurations without exceptions and rounding modes by virtue of existing Implies files. As previously discussed, optimized versions for particular architectures are possible, but not included. i386 gets a special version of f32xaddf64 to avoid problems with double rounding (similar to the existing fdim version), since this function must round just once without an intermediate rounding to long double. (No such special version is needed for any other function, because the nontrivial functions use round-to-odd, which does the intermediate computation with the rounding mode set to round-to-zero, and double rounding is OK except in round-to-nearest mode, so is OK for that intermediate round-to-zero computation.) mul and div will need slightly different special versions for i386 (using round-to-odd on long double instead of precision control) because of the possibility of inexact intermediate results in the subnormal range for double. To reduce duplication among the different function implementations, math-narrow.h gets macros CHECK_NARROW_ADD, NARROW_ADD_ROUND_TO_ODD and NARROW_ADD_TRIVIAL. In the trivial cases and for any architecture-specific optimized implementations, the overhead of the errno setting might be significant, but I think that's best handled through compiler built-in functions rather than providing separate no-errno versions in glibc (and likewise there are no __*_finite entry points for these function provided, __*_finite effectively being no-errno versions at present in most cases). Tested for x86_64 and x86, with both GCC 6 and GCC 7. Tested for mips64 (all three ABIs, both hard and soft float) and powerpc with GCC 7. Tested with build-many-glibcs.py with both GCC 6 and GCC 7. * math/Makefile (libm-narrow-fns): Add add. (libm-test-funcs-narrow): Likewise. * math/Versions (GLIBC_2.28): Add narrowing add functions. * math/bits/mathcalls-narrow.h (add): Use __MATHCALL_NARROW . * math/gen-auto-libm-tests.c (test_functions): Add add. * math/math-narrow.h (CHECK_NARROW_ADD): New macro. (NARROW_ADD_ROUND_TO_ODD): Likewise. (NARROW_ADD_TRIVIAL): Likewise. * sysdeps/ieee754/float128/float128_private.h (__faddl): New macro. (__daddl): Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fadd and dadd. (CFLAGS-nldbl-dadd.c): New variable. (CFLAGS-nldbl-fadd.c): Likewise. * sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add __nldbl_daddl. * sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_daddl): New prototype. * manual/arith.texi (Misc FP Arithmetic): Document fadd, faddl, daddl, fMaddfN, fMaddfNx, fMxaddfN and fMxaddfNx. * math/auto-libm-test-in: Add tests of add. * math/auto-libm-test-out-narrow-add: New generated file. * math/libm-test-narrow-add.inc: New file. * sysdeps/i386/fpu/s_f32xaddf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_f32xaddf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_fadd.c: Likewise. * sysdeps/ieee754/float128/s_f32addf128.c: Likewise. * sysdeps/ieee754/float128/s_f64addf128.c: Likewise. * sysdeps/ieee754/float128/s_f64xaddf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_daddl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_f64xaddf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_faddl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_daddl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_faddl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_daddl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_faddl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-dadd.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-fadd.c: Likewise. * sysdeps/ieee754/soft-fp/s_daddl.c: Likewise. * sysdeps/ieee754/soft-fp/s_fadd.c: Likewise. * sysdeps/ieee754/soft-fp/s_faddl.c: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Update. * sysdeps/mach/hurd/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
Wilco Dijkstra
|
b7c83ca30e |
Remove slow paths from log
Remove the slow paths from log. Like several other double precision math functions, log is exactly rounded. This is not required from math functions and causes major overheads as it requires multiple fallbacks using higher precision arithmetic if a result is close to 0.5ULP. Ridiculous slowdowns of up to 100000x have been reported when the highest precision path triggers. Interestingly removing the slow paths makes hardly any difference in practice: the worst case error is still ~0.502ULP, and exp(log(x)) shows identical results before/after on many millions of random cases. All GLIBC math tests pass on AArch64 and x64 with no change in ULP error. A simple test over a few hundred million values shows log is now 18% faster on average. * manual/probes.texi (slowlog): Delete documentation of removed probe. (slowlog_inexact): Likewise * sysdeps/ieee754/dbl-64/e_log.c (__ieee754_log): Remove slow paths. * sysdeps/ieee754/dbl-64/ulog.h: Remove unused declarations. |
||
|
Joseph Myers
|
6f9a3dd8b8 |
Move LDBL_CLASSIFY_COMPAT to its own header.
The general rule in glibc is that it's better for a macro to be always defined, and tested with #if, than for it to be tested with #ifdef, because the latter is prone to typos in the macro name as well as to the header with the macro accidentally not being included in a file testing it. (Testing with an "if" statement is even better, in those cases where it's possible to do things that way, as it then means both cases in the code get checked for syntax in glibc builds with either value of the condition.) math_private.h has several different groups of macros, meaning that architectures wanting to override some of them need to define those then include the generic version, which then defines macros if not already defined. It's hard to avoid that arrangement completely, but various cases can be improved by splitting out macros or groups of macros into separate files. This patch splits out the LDBL_CLASSIFY_COMPAT macro into a separate ldbl-classify-compat.h header. This macro is tested with #ifdef; this patch changes it to testing with #if, with a default definition to 0 in the generic header and then architecture-specific headers defining it to 1. Tested with build-many-glibcs.py that installed stripped shared libraries are unchanged by the patch. * sysdeps/generic/ldbl-classify-compat.h: New file. * sysdeps/arm/ldbl-classify-compat.h: Likewise. * sysdeps/m68k/coldfire/ldbl-classify-compat.h: Likewise. * sysdeps/microblaze/ldbl-classify-compat.h: Likewise. * sysdeps/mips/ldbl-classify-compat.h: Likewise. * sysdeps/nios2/ldbl-classify-compat.h: Likewise. * sysdeps/sh/ldbl-classify-compat.h: Likewise. * sysdeps/ieee754/dbl-64/s_finite.c: Include <ldbl-classify-compat.h>. [LDBL_CLASSIFY_COMPAT]: Test value, not whether defined. * sysdeps/ieee754/dbl-64/s_isinf.c: Include <ldbl-classify-compat.h>. [LDBL_CLASSIFY_COMPAT]: Test value, not whether defined. * sysdeps/ieee754/dbl-64/s_isnan.c: Include <ldbl-classify-compat.h>. [LDBL_CLASSIFY_COMPAT]: Test value, not whether defined. * sysdeps/ieee754/dbl-64/wordsize-64/s_finite.c: Include <ldbl-classify-compat.h>. [LDBL_CLASSIFY_COMPAT]: Test value, not whether defined. * sysdeps/ieee754/dbl-64/wordsize-64/s_isinf.c: Include <ldbl-classify-compat.h>. [LDBL_CLASSIFY_COMPAT]: Test value, not whether defined. * sysdeps/ieee754/dbl-64/wordsize-64/s_isnan.c: Include <ldbl-classify-compat.h>. [LDBL_CLASSIFY_COMPAT]: Test value, not whether defined. * sysdeps/arm/math_private.h (LDBL_CLASSIFY_COMPAT): Remove macro. * sysdeps/mips/math_private.h (LDBL_CLASSIFY_COMPAT): Likewise. * sysdeps/m68k/coldfire/math_private.h: Remove file. * sysdeps/microblaze/math_private.h: Likewise. * sysdeps/nios2/math_private.h: Likewise. * sysdeps/sh/math_private.h: Likewise. |
||
Carlos O'Donell
|
f1d7368196 |
Fix -Os log1p, log1pf build (bug 21314).
As reported in bug 21314, building log1p and log1pf fails with -Os because of a spurious -Wmaybe-uninitialized warning (reported there for GCC 5 for MIPS, I see it also with GCC 7 for x86_64). This patch, based on the patches in the bug, fixes this using the DIAG_* macros. Tested for x86_64 with -Os that this eliminates those warnings and so allows the build to progress further. 2018-02-01 Carlos O'Donell <carlos@redhat.com> Ramin Seyed-Moussavi <lordrasmus@gmail.com> Joseph Myers <joseph@codesourcery.com> [BZ #21314] * sysdeps/ieee754/dbl-64/s_log1p.c: Include <libc-diag.h>. (__log1p): Disable -Wmaybe-uninitialized for -Os around computation using c. * sysdeps/ieee754/flt-32/s_log1pf.c: Include <libc-diag.h>. (__log1pf): Disable -Wmaybe-uninitialized for -Os around computation using c. |
||
|
Joseph Myers
|
688903eb3e |
Update copyright dates with scripts/update-copyrights.
* All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise. |
||
Bernd Edlinger
|
648615e13f |
Avoid signed shift overflow in pow (bug 21309).
As noted in bug 21309, dbl-64/e_pow.c contains signed int shifts that, although the shift count is in the range [0, 31], shift bits into and beyond the sign bit and so are undefined in ISO C. Although this is defined in GNU C, this patch from the bug cleans up the code to avoid those shifts. Tested for x86_64. [BZ #21309] * sysdeps/ieee754/dbl-64/e_pow.c (checkint): Make m and n unsigned. |
||
|
Joseph Myers
|
f1e005022e |
Revert exp reimplementation (causes test failures).
Revert: 2017-12-19 Joseph Myers <joseph@codesourcery.com> * sysdeps/x86_64/fpu/libm-test-ulps: Update. 2017-12-19 Patrick McGehearty <patrick.mcgehearty@oracle.com> * sysdeps/ieee754/dbl-64/e_exp.c: Include <math-svid-compat.h> and <errno.h>. Include "eexp.tbl". (half): New constant. (one): Likewise. (__ieee754_exp): Rewrite. (__slowexp): Remove prototype. * sysdeps/ieee754/dbl-64/eexp.tbl: New file. * sysdeps/ieee754/dbl-64/slowexp.c: Remove file. * sysdeps/i386/fpu/slowexp.c: Likewise. * sysdeps/ia64/fpu/slowexp.c: Likewise. * sysdeps/m68k/m680x0/fpu/slowexp.c: Likewise. * sysdeps/x86_64/fpu/multiarch/slowexp-avx.c: Likewise. * sysdeps/x86_64/fpu/multiarch/slowexp-fma.c: Likewise. * sysdeps/x86_64/fpu/multiarch/slowexp-fma4.c: Likewise. * sysdeps/generic/math_private.h (__slowexp): Remove prototype. * sysdeps/ieee754/dbl-64/e_pow.c: Remove mention of slowexp.c in comment. * sysdeps/powerpc/power4/fpu/Makefile [$(subdir) = math] (CPPFLAGS-slowexp.c): Remove variable. * sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines): Remove slowexp-fma, slowexp-fma4 and slowexp-avx. (CFLAGS-slowexp-fma.c): Remove variable. (CFLAGS-slowexp-fma4.c): Likewise. (CFLAGS-slowexp-avx.c): Likewise. * sysdeps/x86_64/fpu/multiarch/e_exp-avx.c (__slowexp): Do not define as macro. * sysdeps/x86_64/fpu/multiarch/e_exp-fma.c (__slowexp): Likewise. * sysdeps/x86_64/fpu/multiarch/e_exp-fma4.c (__slowexp): Likewise. * math/Makefile (type-double-routines): Remove slowexp. * manual/probes.texi (slowexp_p6): Remove. (slowexp_p32): Likewise. |
||
Patrick McGehearty
|
6fd0a3c6a8 |
Improve __ieee754_exp() performance by greater than 5x on sparc/x86.
These changes will be active for all platforms that don't provide
their own exp() routines. They will also be active for ieee754
versions of ccos, ccosh, cosh, csin, csinh, sinh, exp10, gamma, and
erf.
Typical performance gains is typically around 5x when measured on
Sparc s7 for common values between exp(1) and exp(40).
Using the glibc perf tests on sparc,
sparc (nsec) x86 (nsec)
old new old new
max 17629 395 5173 144
min 399 54 15 13
mean 5317 200 1349 23
The extreme max times for the old (ieee754) exp are due to the
multiprecision computation in the old algorithm when the true value is
very near 0.5 ulp away from an value representable in double
precision. The new algorithm does not take special measures for those
cases. The current glibc exp perf tests overrepresent those values.
Informal testing suggests approximately one in 200 cases might
invoke the high cost computation. The performance advantage of the new
algorithm for other values is still large but not as large as indicated
by the chart above.
Glibc correctness tests for exp() and expf() were run. Within the
test suite 3 input values were found to cause 1 bit differences (ulp)
when "FE_TONEAREST" rounding mode is set. No differences in exp() were
seen for the tested values for the other rounding modes.
Typical example:
exp(-0x1.760cd2p+0) (-1.46113312244415283203125)
new code: 2.31973271630014299393707e-01 0x1.db14cd799387ap-3
old code: 2.31973271630014271638132e-01 0x1.db14cd7993879p-3
exp = 2.31973271630014285508337 (high precision)
Old delta: off by 0.49 ulp
New delta: off by 0.51 ulp
In addition, because ieee754_exp() is used by other routines, cexp()
showed test results with very small imaginary input values where the
imaginary portion of the result was off by 3 ulp when in upward
rounding mode, but not in the other rounding modes. For x86, tgamma
showed a few values where the ulp increased to 6 (max ulp for tgamma
is 5). Sparc tgamma did not show these failures. I presume the tgamma
differences are due to compiler optimization differences within the
gamma function.The gamma function is known to be difficult to compute
accurately.
* sysdeps/ieee754/dbl-64/e_exp.c: Include <math-svid-compat.h> and
<errno.h>. Include "eexp.tbl".
(half): New constant.
(one): Likewise.
(__ieee754_exp): Rewrite.
(__slowexp): Remove prototype.
* sysdeps/ieee754/dbl-64/eexp.tbl: New file.
* sysdeps/ieee754/dbl-64/slowexp.c: Remove file.
* sysdeps/i386/fpu/slowexp.c: Likewise.
* sysdeps/ia64/fpu/slowexp.c: Likewise.
* sysdeps/m68k/m680x0/fpu/slowexp.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowexp-avx.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowexp-fma.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowexp-fma4.c: Likewise.
* sysdeps/generic/math_private.h (__slowexp): Remove prototype.
* sysdeps/ieee754/dbl-64/e_pow.c: Remove mention of slowexp.c in
comment.
* sysdeps/powerpc/power4/fpu/Makefile [$(subdir) = math]
(CPPFLAGS-slowexp.c): Remove variable.
* sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines):
Remove slowexp-fma, slowexp-fma4 and slowexp-avx.
(CFLAGS-slowexp-fma.c): Remove variable.
(CFLAGS-slowexp-fma4.c): Likewise.
(CFLAGS-slowexp-avx.c): Likewise.
* sysdeps/x86_64/fpu/multiarch/e_exp-avx.c (__slowexp): Do not
define as macro.
* sysdeps/x86_64/fpu/multiarch/e_exp-fma.c (__slowexp): Likewise.
* sysdeps/x86_64/fpu/multiarch/e_exp-fma4.c (__slowexp): Likewise.
* math/Makefile (type-double-routines): Remove slowexp.
* manual/probes.texi (slowexp_p6): Remove.
(slowexp_p32): Likewise.
|
||
|
Joseph Myers
|
7e16a5d1d1 |
Use libm_alias_double for dbl-64 fma.
This patch makes dbl-64 fma use libm_alias_double. The ldbl-opt version is removed. The sparc32 version no longer needs to handle compat symbols, while alpha needs a new wrapper to avoid getting the ldbl-128 version (where ldbl-opt is earlier in the list of sysdeps directories, so previously fma came from there). Tested for x86_64, and tested with build-many-glibcs.py that installed stripped shared libraries are unchanged by the patch. * sysdeps/ieee754/dbl-64/s_fma.c: Include <libm-alias-double.h>. (fma): Define using libm_alias_double. * sysdeps/ieee754/ldbl-opt/s_fma.c: Remove file. * sysdeps/sparc/sparc32/fpu/s_fma.c: Do not include <math_ldbl_opt.h>. (fmal): Do not define as compat symbol here. * sysdeps/alpha/fpu/s_fma.c: New file. |
||
Szabolcs Nagy
|
86c27ade1e |
[BZ #22244] Fix yn(n,0) without SVID wrapper
Without SVID compat wrapper yn(n,0) and ynf(n,0) does not raise the divide-by-zero excpetion and it may return inf with the wrong sign for n < 0. [BZ #22244] * sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_yn): Fix x == 0 case. * sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_ynf): Likewise. |
||
|
Szabolcs Nagy
|
8f8f8ef7ab |
[BZ #22243] fix log2(0) and log(10) in downward rounding
On 64bit targets if the SVID compat wrapper is suppressed (e.g. static linking) then log2(0) and log10(0) returned inf instead of -inf. [BZ #22243] * sysdeps/ieee754/dbl-64/wordsize-64/e_log10.c (__ieee754_log10): Use fabs. * sysdeps/ieee754/dbl-64/wordsize-64/e_log2.c (__ieee754_log2): Likewise. |
||
|
Joseph Myers
|
d8f619b393 |
Use libm_alias_double for dbl-64 modf.
This patch makes dbl-64 modf use libm_alias_double. Both the dbl-64 and dbl-64/wordsize-64 versions are changed, and the ldbl-opt version is changed to define the libc compat symbol only. Because of multiarch wrappers, the changed implementations are made not to define aliases at all if __modf is defined as a macro, as with other functions, so avoiding duplicate compat symbols while allowing those wrappers to be simplified. Tested for x86_64, and verified with build-many-glibcs.py that installed stripped shared libraries are unchanged by the patch. * sysdeps/ieee754/dbl-64/s_modf.c: Include <libm-alias-double.h>. (modf): Define using libm_alias_double, only if [!__modf]. * sysdeps/ieee754/dbl-64/wordsize-64/s_modf.c: Include <libm-alias-double.h>. (modf): Define using libm_alias_double, only if [!__modf]. * sysdeps/ieee754/ldbl-opt/s_modf.c (modfl): Only define libc compat symbol here. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_modf-ppc32.c (weak_alias): Do not undefine and redefine. (strong_alias): Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_modf-ppc64.c (weak_alias): Likewise. (strong_alias): Likewise. |
||
|
Joseph Myers
|
4699cb8b5f |
Use libm_alias_double for dbl-64 logb.
This patch makes dbl-64 logb use libm_alias_double. Both the dbl-64 and dbl-64/wordsize-64 versions are changed, and the ldbl-opt version is removed. Because of multiarch wrappers, the changed implementations are made not to define aliases at all if __logb is defined as a macro, as with other functions, so avoiding duplicate compat symbols while allowing those wrappers to be simplified. Tested for x86_64, and verified with build-many-glibcs.py that installed stripped shared libraries are unchanged (except on alpha where changes from using the wordsize-64 version are expected). * sysdeps/ieee754/dbl-64/s_logb.c: Include <libm-alias-double.h>. (logb): Define using libm_alias_double, only if [!__logb]. * sysdeps/ieee754/dbl-64/wordsize-64/s_logb.c: Include <libm-alias-double.h>. (logb): Define using libm_alias_double, only if [!__logb]. * sysdeps/ieee754/ldbl-opt/s_logb.c: Remove file. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logb-ppc32.c (weak_alias): Do not undefine and redefine. (strong_alias): Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_logb-ppc64.c (weak_alias): Likewise. (strong_alias): Likewise. |
||
|
Joseph Myers
|
7f1cbdf8ed |
Use libm_alias_float for dbl-64 fmaf.
This patch makes the implementation of fmaf in the dbl-64 directory use libm_alias float. Tested for x86_64, and verified with build-many-glibcs.py that installed stripped shared libraries are unchanged by this patch. * sysdeps/ieee754/dbl-64/s_fmaf.c: Include <libm-alias-float.h>. [!__fmaf] (fmaf): Define using libm_alias_float. |
||
|
Joseph Myers
|
39793865ec |
Use libm_alias_double for dbl-64 frexp.
This patch makes dbl-64 frexp use libm_alias_double. Both the dbl-64 and dbl-64/wordsize-64 versions are changed; the ldbl-opt version is made to define only the libc frexpl compat symbol, now the generic code handles the libm compat symbol automatically. Tested for x86_64, and verified with build-many-glibcs.py that installed stripped shared libraries are unchanged by this patch. * sysdeps/ieee754/dbl-64/s_frexp.c: Include <libm-alias-double.h>. (frexp): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/wordsize-64/s_frexp.c: Include <libm-alias-double.h>. (frexp): Define using libm_alias_double. * sysdeps/ieee754/ldbl-opt/s_frexp.c (frexpl): Only define libc compat symbol here. |
||
|
Joseph Myers
|
a1132b5e56 |
Use libm_alias_double for more dbl-64 functions.
This patch makes more dbl-64 functions use libm_alias_double to define function aliases. Specifically, it makes the change for functions with dbl-64/wordsize-64 versions, changing both the dbl-64 and dbl-64/wordsize-64 versions and removing the ldbl-opt wrappers. Functions are excluded from this patch if there are complications because of versions of those functions also present in libc, or architecture-specific wrappers round these files. Tested for x86_64, and with build-many-glibcs.py. Installed stripped shared libraries are unchanged except for alpha (where increased use of dbl-64/wordsize-64 files, where previously ldbl-opt files that wrapped dbl-64 files were used, was expected to result in different, better code). * sysdeps/ieee754/dbl-64/s_ceil.c: Include <libm-alias-double.h>. (ceil): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/s_floor.c: Include <libm-alias-double.h>. (floor): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/s_llround.c: Include <libm-alias-double.h>. (llround): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/s_lround.c: Include <libm-alias-double.h>. (lround): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/s_nearbyint.c: Include <libm-alias-double.h>. (nearbyint): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/s_remquo.c: Include <libm-alias-double.h>. (remquo): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/s_rint.c: Include <libm-alias-double.h>. (rint): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/s_round.c: Include <libm-alias-double.h>. (round): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/s_trunc.c: Include <libm-alias-double.h>. (trunc): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/wordsize-64/s_ceil.c: Include <libm-alias-double.h>. (ceil): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/wordsize-64/s_floor.c: Include <libm-alias-double.h>. (floor): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/wordsize-64/s_llround.c: Include <libm-alias-double.h>. (llround): Define using libm_alias_double. [_LP64] (lround): Likewise. * sysdeps/ieee754/dbl-64/wordsize-64/s_lround.c: Include <libm-alias-double.h>. [!_LP64] (lround): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/wordsize-64/s_nearbyint.c: Include <libm-alias-double.h>. (nearbyint): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/wordsize-64/s_remquo.c: Include <libm-alias-double.h>. (remquo): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/wordsize-64/s_rint.c: Include <libm-alias-double.h>. (rint): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/wordsize-64/s_round.c: Include <libm-alias-double.h>. (round): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/wordsize-64/s_trunc.c: Include <libm-alias-double.h>. (trunc): Define using libm_alias_double. * sysdeps/ieee754/ldbl-opt/s_ceil.c: Remove file. * sysdeps/ieee754/ldbl-opt/s_floor.c: Likewise. * sysdeps/ieee754/ldbl-opt/s_llround.c: Likewise. * sysdeps/ieee754/ldbl-opt/s_lround.c: Likewise. * sysdeps/ieee754/ldbl-opt/s_nearbyint.c: Likewise. * sysdeps/ieee754/ldbl-opt/s_remquo.c: Likewise. * sysdeps/ieee754/ldbl-opt/s_rint.c: Likewise. * sysdeps/ieee754/ldbl-opt/s_round.c: Likewise. * sysdeps/ieee754/ldbl-opt/s_trunc.c: Likewise. |
||
|
Joseph Myers
|
38722448c6 |
Use libm_alias_double for dbl-64 atan, tan.
This patch makes the dbl-64 atan and tan implementations use libm_alias_double, removing the corresponding ldbl-opt wrappers. Tested for x86_64, and with build-many-glibcs.py. Installed stripped shared libraries are unchanged on non-ldbl-opt platforms. For ldbl-opt configurations, the patch has the effect of causing compat_symbol to define atanl and tanl in terms of __atan and __tan instead of in terms of atan and tan, which is enough to change the installed stripped libm.so. * sysdeps/ieee754/dbl-64/s_atan.c: Include <libm-alias-double.h>. (atan): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/s_tan.c: Include <libm-alias-double.h>. (tan): Define using libm_alias_double. * sysdeps/ieee754/ldbl-opt/s_atan.c: Remove file. * sysdeps/ieee754/ldbl-opt/s_tan.c: Likewise. |
||
|
Joseph Myers
|
527cd19c3d |
Make dbl-64 atan and tan into weak aliases.
This patch converts the dbl-64 implementations of atan and tan into weak aliases of __atan and __tan, in preparation for making them use libm_alias_double. Consequent changes are made to the x86_64 multiarch versions wrapping round them (with the dbl-64 functions, like other such functions, being made not to define their aliases at all if __atan or __tan are defined as macros by an including file). Tested for x86_64, and with build-many-glibcs.py. * sysdeps/ieee754/dbl-64/s_atan.c (atan): Rename to __atan and define as weak alias of __atan. Do not define any aliases if [__atan]. [NO_LONG_DOUBLE] (__atanl): Define as strong alias of __atan. [NO_LONG_DOUBLE] (atanl): Define as weak alias of __atanl. * sysdeps/ieee754/dbl-64/s_tan.c (tan): Rename to __tan and define as weak alias of __tan. Do not define any aliases if [__tan]. [NO_LONG_DOUBLE] (__tanl): Define as strong alias of __tan. [NO_LONG_DOUBLE] (tanl): Define as weak alias of __tanl. * sysdeps/x86_64/fpu/multiarch/s_atan-avx.c (atan): Rename to __atan. * sysdeps/x86_64/fpu/multiarch/s_atan-fma.c (atan): Likewise. * sysdeps/x86_64/fpu/multiarch/s_atan-fma4.c (atan): Likewise. * sysdeps/x86_64/fpu/multiarch/s_atan.c (atan): Rename to __atan and define as weak alias of __atan. * sysdeps/x86_64/fpu/multiarch/s_tan-avx.c (tan): Rename to __atan. * sysdeps/x86_64/fpu/multiarch/s_tan-fma.c (tan): Likewise. * sysdeps/x86_64/fpu/multiarch/s_tan-fma4.c (tan): Likewise. * sysdeps/x86_64/fpu/multiarch/s_tan.c (tan): Rename to __tan and define as weak alias of __tan. |
||
|
Joseph Myers
|
1e2bffd05c |
Use libm_alias_double for some dbl-64 functions.
Continuing the move of libm aliases to common macros that can create _FloatN / _FloatNx aliases in future, this patch converts some dbl-64 functions to using libm_alias_double, thereby eliminating the need for some ldbl-opt wrappers. This patch deliberately limits what functions are converted so that it can be verified by comparison of stipped binaries. Specifically, atan and tan are excluded because they first need converting to being weak aliases; fma is omitted as it has additional complications with versions in other directories (removing the ldbl-opt version can e.g. cause the ldbl-128 version to be used instead of dbl-64); and functions that have both dbl-64/wordsize-64 and ldbl-opt versions are excluded because ldbl-opt currently always wraps dbl-64 function versions, so changing those will result in platforms using both ldbl-opt and dbl-64/wordsize-64 (i.e. alpha) starting to use the dbl-64/wordsize-64 versions of those functions (which is good, as an optimization, but still best separated from the present patch to get better validation). Tested for x86_64, and tested with build-many-glibcs.py that installed stripped shared libraries are unchanged by the patch. * sysdeps/ieee754/dbl-64/s_asinh.c: Include <libm-alias-double.h>. (asinh): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/s_cbrt.c: Include <libm-alias-double.h>. (cbrt): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/s_copysign.c: Include <libm-alias-double.h>. (copysign): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/s_erf.c: Include <libm-alias-double.h>. (erf): Define using libm_alias_double. (erfc): Likewise. * sysdeps/ieee754/dbl-64/s_expm1.c: Include <libm-alias-double.h>. (expm1): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/s_fabs.c: Include <libm-alias-double.h>. (fabs): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/s_fromfp.c (fromfp): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/s_fromfp_main.c: Include <libm-alias-double.h>. * sysdeps/ieee754/dbl-64/s_fromfpx.c (fromfpx): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/s_getpayload.c: Include <libm-alias-double.h>. (getpayload): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/s_llrint.c: Include <libm-alias-double.h>. (llrint): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/s_lrint.c: Include <libm-alias-double.h>. (lrint): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/s_nextup.c: Include <libm-alias-double.h>. (nextup): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/s_roundeven.c: Include <libm-alias-double.h>. (roundeven): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/s_setpayload.c (setpayload): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/s_setpayload_main.c: Include <libm-alias-double.h>. * sysdeps/ieee754/dbl-64/s_setpayloadsig.c (setpayloadsig): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/s_sin.c: Include <libm-alias-double.h>. (cos): Define using libm_alias_double. (sin): Likewise. * sysdeps/ieee754/dbl-64/s_sincos.c: Include <libm-alias-double.h>. (sincos): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/s_tanh.c: Include <libm-alias-double.h>. (tanh): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/s_totalorder.c: Include <libm-alias-double.h>. (totalorder): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/s_totalordermag.c: Include <libm-alias-double.h>. (totalordermag): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/s_ufromfp.c (ufromfp): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/s_ufromfpx.c (ufromfpx): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/wordsize-64/s_getpayload.c: Include <libm-alias-double.h>. (getpayload): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/wordsize-64/s_roundeven.c: Include <libm-alias-double.h>. (roundeven): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/wordsize-64/s_setpayload_main.c: Include <libm-alias-double.h>. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Include <libm-alias-double.h>. (totalorder): Define using libm_alias_double. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Include <libm-alias-double.h>. (totalordermag): Define using libm_alias_double. * sysdeps/ieee754/ldbl-opt/s_copysign.c (copysignl): Only define libc compat symbol here. * sysdeps/ieee754/ldbl-opt/s_asinh.c: Remove file. * sysdeps/ieee754/ldbl-opt/s_cbrt.c: Likewise. * sysdeps/ieee754/ldbl-opt/s_erf.c: Likewise. * sysdeps/ieee754/ldbl-opt/s_expm1.c: Likewise. * sysdeps/ieee754/ldbl-opt/s_fabs.c: Likewise. * sysdeps/ieee754/ldbl-opt/s_llrint.c: Likewise. * sysdeps/ieee754/ldbl-opt/s_lrint.c: Likewise. * sysdeps/ieee754/ldbl-opt/s_sin.c: Likewise. * sysdeps/ieee754/ldbl-opt/s_sincos.c: Likewise. * sysdeps/ieee754/ldbl-opt/s_tanh.c: Likewise. |
||
|
Wilco Dijkstra
|
bd8d53bb33 |
Use fabs(f/l) rather than __fabs
A few math functions still use __fabs(f/l) rather than fabs, which means they won't be inlined. Rename them so they are inlined. Also add -fno-builtin-fabsl to nofpu powerpc makefile to work around BZ #29253. * sysdeps/ieee754/dbl-64/e_lgamma_r.c (__ieee754_lgamma_r): Use fabs rather than __fabs. * sysdeps/ieee754/dbl-64/e_log10.c (__ieee754_log10): Likewise. * sysdeps/ieee754/dbl-64/e_log2.c (__ieee754_log2): Likewise. * sysdeps/ieee754/flt-32/e_lgammaf_r.c (__ieee754_lgammaf_r): Use fabsf rather than __fabsf. * sysdeps/ieee754/flt-32/e_log10f.c (__ieee754_log10f): Likewise. * sysdeps/ieee754/flt-32/e_log2f.c (__ieee754_log2f): Likewise. * sysdeps/ieee754/ldbl-128/e_lgammal_r.c (__ieee754_lgammal_r): Use fabsl rather than __fabsl. * sysdeps/ieee754/ldbl-128/e_log10l.c (__ieee754_log10l): Likewise. * sysdeps/ieee754/ldbl-128/e_log2l.c (__ieee754_log2l): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_lgammal_r.c (__ieee754_lgammal_r): Use fabsl rather than __fabsl. * sysdeps/ieee754/ldbl-128ibm/e_log10l.c (__ieee754_log10l): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_log2l.c (__ieee754_log2l): Likewise. * sysdeps/powerpc/nofpu/Makefile: Add -fno-builtin-fabsl for BZ #29253. |
||
|
Joseph Myers
|
f124cb3811 |
Fix nearbyint arithmetic moved before feholdexcept (bug 22225).
In <https://sourceware.org/ml/libc-alpha/2013-05/msg00722.html> I remarked on the possibility of arithmetic in various nearbyint implementations being scheduled before feholdexcept calls, resulting in spurious "inexact" exceptions. I'm now actually observing this occurring in glibc built for ARM with GCC 7 (in fact, both copies of the same addition/subtraction sequence being combined and moved out before the conditionals and feholdexcept/fesetenv pairs), resulting in test failures. This patch makes the nearbyint implementations with this particular feholdexcept / arithmetic / fesetenv pattern consistently use math_opt_barrier on the function argument when first used in arithmetic, and also consistently use math_force_eval before fesetenv (the latter was generally already done, but the dbl-64/wordsize-64 implementation used math_opt_barrier instead, and as math_opt_barrier's intended effect is through its output value being used, such a use that doesn't use the return value is suspect). Tested for x86_64 (--disable-multi-arch so more of these implementations get used), and for ARM in a configuration where I saw the problem scheduling. [BZ #22225] * sysdeps/ieee754/dbl-64/s_nearbyint.c (__nearbyint): Use math_opt_barrier on argument when doing arithmetic on it. * sysdeps/ieee754/dbl-64/wordsize-64/s_nearbyint.c (__nearbyint): Likewise. Use math_force_eval not math_opt_barrier after arithmetic. * sysdeps/ieee754/flt-32/s_nearbyintf.c (__nearbyintf): Use math_opt_barrier on argument when doing arithmetic on it. * sysdeps/ieee754/ldbl-128/s_nearbyintl.c (__nearbyintl): Likewise. |
||
Stefan Liebler
|
9947638d74 |
Fix typo in sincos32.h inclusion guard.
This patch fixes a typo in inclusion guard in sincos32.h. ChangeLog: * sysdeps/ieee754/dbl-64/sincos32.h [SINCCOS32_H]: Remove define. [SINCOS32_H]: Define. |
||
|
Joseph Myers
|
01f2881245 |
Make more libm functions into weak aliases.
Many libm functions define the function as __<func> and then define <func> as a weak alias. This is not at all limited to cases where there is an internal call that has namespace reasons to need to call __<func> instead of <func>. The common macros for creating libm function aliases work on the basis of public function names all being aliases; that is, they define aliases for functions using the above pattern. Thus, where a function just defines the public name <func> directly, changing that to be a weak alias enables a subsequent conversion to the common macros to retain the exact existing symbols (and so be testable by comparison of stripped binaries). This patch converts many existing functions to use the weak alias pattern, as preparation for subsequent conversions to common macros. I do expect that _FloatN/_FloatNx function aliases will end up needing new variants of the common macros that do *not* create the original float / double / long double name of a function - for cases where that name is created specially to give it a particular symbol version, for example - but for functions that can use the most common macros to create all the public names as aliases, it makes sense for them to do so. Regarding the Bessel function wrappers in this patch: only float and double wrappers are changed because the long double wrappers already used the weak alias pattern. Tested for x86_64, and with build-many-glibcs.py. * include/math.h (roundeven): Change hidden_proto call to __roundeven. * math/w_j0_compat.c (j0): Rename to __j0 and define as weak alias. [NO_LONG_DOUBLE] (__j0l): New strong alias. (y0): Rename to __y0 and define as weak alias. [NO_LONG_DOUBLE] (__y0l): New strong alias. * math/w_j0f_compat.c (j0f): Rename to __j0f and define as weak alias. (y0f): Rename to __y0f and define as weak alias. * math/w_j1_compat.c (j1): Rename to __j1 and define as weak alias. [NO_LONG_DOUBLE] (__j1l): New strong alias. (y1): Rename to __y1 and define as weak alias. [NO_LONG_DOUBLE] (__y1l): New strong alias. * math/w_j1f_compat.c (j1f): Rename to __j1f and define as weak alias. (y1f): Rename to __y1f and define as weak alias. * math/w_jn_compat.c (jn): Rename to __jn and define as weak alias. [NO_LONG_DOUBLE] (__jnl): New strong alias. (yn): Rename to __yn and define as weak alias. [NO_LONG_DOUBLE] (__ynl): New strong alias. * math/w_jnf_compat.c (jnf): Rename to __jnf and define as weak alias. (ynf): Rename to __ynf and define as weak alias. * sysdeps/ieee754/dbl-64/s_fromfp.c (FUNC): Define to __fromfp. (fromfp): Define as weak alias. [NO_LONG_DOUBLE] (__fromfpl): New strong alias. * sysdeps/ieee754/dbl-64/s_fromfpx.c (FUNC): Define to __fromfpx. (fromfpx): Define as weak alias. [NO_LONG_DOUBLE] (__fromfpxl): New strong alias. * sysdeps/ieee754/dbl-64/s_getpayload.c (getpayload): Rename to __getpayload and define as weak alias. [NO_LONG_DOUBLE] (__getpayloadl): New strong alias. * sysdeps/ieee754/dbl-64/s_roundeven.c (roundeven): Rename to __roundeven and define as weak alias. [NO_LONG_DOUBLE] (__roundevenl): New strong alias. * sysdeps/ieee754/dbl-64/s_setpayload.c (FUNC): Define to __setpayload. (setpayload): Define as weak alias. [NO_LONG_DOUBLE] (__setpayloadl): New strong alias. * sysdeps/ieee754/dbl-64/s_setpayloadsig.c (FUNC): Define to __setpayloadsig. (setpayloadsig): Define as weak alias. [NO_LONG_DOUBLE] (__setpayloadsigl): New strong alias. * sysdeps/ieee754/dbl-64/s_totalorder.c (totalorder): Rename to __totalorder and define as weak alias. [NO_LONG_DOUBLE] (__totalorderl): New strong alias. * sysdeps/ieee754/dbl-64/s_totalordermag.c (totalordermag): Rename to __totalordermag and define as weak alias. [NO_LONG_DOUBLE] (__totalordermagl): New strong alias. * sysdeps/ieee754/dbl-64/s_ufromfp.c (FUNC): Define to __ufromfp. (ufromfp): Define as weak alias. [NO_LONG_DOUBLE] (__ufromfpl): New strong alias. * sysdeps/ieee754/dbl-64/s_ufromfpx.c (FUNC): Define to __ufromfpx. (ufromfpx): Define as weak alias. [NO_LONG_DOUBLE] (__ufromfpxl): New strong alias. * sysdeps/ieee754/dbl-64/wordsize-64/s_getpayload.c (getpayload): Rename to __getpayload and define as weak alias. [NO_LONG_DOUBLE] (__getpayloadl): New strong alias. * sysdeps/ieee754/dbl-64/wordsize-64/s_roundeven.c (roundeven): Rename to __roundeven and define as weak alias. [NO_LONG_DOUBLE] (__roundevenl): New strong alias. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c (totalorder): Rename to __totalorder and define as weak alias. [NO_LONG_DOUBLE] (__totalorderl): New strong alias. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c (totalordermag): Rename to __totalordermag and define as weak alias. [NO_LONG_DOUBLE] (__totalordermagl): New strong alias. * sysdeps/ieee754/float128/float128_private.h (__getpayloadl): New macro. (__roundevenl): Likewise. (__totalorderl): Likewise. (__totalordermagl): Likewise * sysdeps/ieee754/float128/s_fromfpf128.c (FUNC): Define to __fromfpf128. (fromfpf128): Define as weak alias. * sysdeps/ieee754/float128/s_fromfpxf128.c (FUNC): Define to __fromfpxf128. (fromfpxf128): Define as weak alias. * sysdeps/ieee754/float128/s_setpayloadf128.c (FUNC): Define to __setpayloadf128. (setpayloadf128): Define as weak alias. * sysdeps/ieee754/float128/s_setpayloadsigf128.c (FUNC): Define to __setpayloadsigf128. (setpayloadsigf128): Define as weak alias. * sysdeps/ieee754/float128/s_ufromfpf128.c (FUNC): Define to __ufromfpf128. (ufromfpf128): Define as weak alias. * sysdeps/ieee754/float128/s_ufromfpxf128.c (FUNC): Define to __ufromfpxf128. (ufromfpxf128): Define as weak alias. * sysdeps/ieee754/flt-32/s_fromfpf.c (FUNC): Define to __fromfpf. (fromfpf): Define as weak alias. * sysdeps/ieee754/flt-32/s_fromfpxf.c (FUNC): Define to __fromfpxf. (fromfpxf): Define as weak alias. * sysdeps/ieee754/flt-32/s_getpayloadf.c (getpayloadf): Rename to __getpayloadf and define as weak alias. * sysdeps/ieee754/flt-32/s_roundevenf.c (roundevenf): Rename to __roundevenf and define as weak alias. * sysdeps/ieee754/flt-32/s_setpayloadf.c (FUNC): Define to __setpayloadf. (setpayloadf): Define as weak alias. * sysdeps/ieee754/flt-32/s_setpayloadsigf.c (FUNC): Define to __setpayloadsigf. (setpayloadsigf): Define as weak alias. * sysdeps/ieee754/flt-32/s_totalorderf.c (totalorderf): Rename to __totalorderf and define as weak alias. * sysdeps/ieee754/flt-32/s_totalordermagf.c (totalordermagf): Rename to __totalordermagf and define as weak alias. * sysdeps/ieee754/flt-32/s_ufromfpf.c (FUNC): Define to __ufromfpf. (ufromfpf): Define as weak alias. * sysdeps/ieee754/flt-32/s_ufromfpxf.c (FUNC): Define to __ufromfpxf. (ufromfpxf): Define as weak alias. * sysdeps/ieee754/ldbl-128/s_fromfpl.c (FUNC): Define to __fromfpl. (fromfpl): Define as weak alias. * sysdeps/ieee754/ldbl-128/s_fromfpxl.c (FUNC): Define to __fromfpxl. (fromfpxl): Define as weak alias. * sysdeps/ieee754/ldbl-128/s_getpayloadl.c (getpayloadl): Rename to __getpayloadl and define as weak alias. * sysdeps/ieee754/ldbl-128/s_roundevenl.c (roundevenl): Rename to __roundevenl and define as weak alias. * sysdeps/ieee754/ldbl-128/s_setpayloadl.c (FUNC): Define to __setpayloadl. (setpayloadl): Define as weak alias. * sysdeps/ieee754/ldbl-128/s_setpayloadsigl.c (FUNC): Define to __setpayloadsigl. (setpayloadsigl): Define as weak alias. * sysdeps/ieee754/ldbl-128/s_totalorderl.c (totalorderl): Rename to __totalorderl and define as weak alias. * sysdeps/ieee754/ldbl-128/s_totalordermagl.c (totalordermagl): Rename to __totalordermagl and define as weak alias. * sysdeps/ieee754/ldbl-128/s_ufromfpl.c (FUNC): Define to __ufromfpl. (ufromfpl): Define as weak alias. * sysdeps/ieee754/ldbl-128/s_ufromfpxl.c (FUNC): Define to __ufromfpxl. (ufromfpxl): Define as weak alias. * sysdeps/ieee754/ldbl-128ibm/s_fromfpl.c (FUNC): Define to __fromfpl. (fromfpl): Define as weak alias. * sysdeps/ieee754/ldbl-128ibm/s_fromfpxl.c (FUNC): Define to __fromfpxl. (fromfpxl): Define as weak alias. * sysdeps/ieee754/ldbl-128ibm/s_getpayloadl.c (getpayloadl): Rename to __getpayloadl and define as weak alias. * sysdeps/ieee754/ldbl-128ibm/s_roundevenl.c (roundevenl): Rename to __roundevenl and define as weak alias. Call __roundeven instead of roundeven. * sysdeps/ieee754/ldbl-128ibm/s_setpayloadl.c (FUNC): Define to __setpayloadl. (setpayloadl): Define as weak alias. * sysdeps/ieee754/ldbl-128ibm/s_setpayloadsigl.c (FUNC): Define to __setpayloadsigl. (setpayloadsigl): Define as weak alias. * sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c (totalorderl): Rename to __totalorderl and define as weak alias. * sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c (totalordermagl): Rename to __totalordermagl and define as weak alias. * sysdeps/ieee754/ldbl-128ibm/s_ufromfpl.c (FUNC): Define to __ufromfpl. (ufromfpl): Define as weak alias. * sysdeps/ieee754/ldbl-128ibm/s_ufromfpxl.c (FUNC): Define to __ufromfpxl. (ufromfpxl): Define as weak alias. * sysdeps/ieee754/ldbl-96/s_fromfpl.c (FUNC): Define to __fromfpl. (fromfpl): Define as weak alias. * sysdeps/ieee754/ldbl-96/s_fromfpxl.c (FUNC): Define to __fromfpxl. (fromfpxl): Define as weak alias. * sysdeps/ieee754/ldbl-96/s_getpayloadl.c (getpayloadl): Rename to __getpayloadl and define as weak alias. * sysdeps/ieee754/ldbl-96/s_roundevenl.c (roundevenl): Rename to __roundevenl and define as weak alias. * sysdeps/ieee754/ldbl-96/s_setpayloadl.c (FUNC): Define to __setpayloadl. (setpayloadl): Define as weak alias. * sysdeps/ieee754/ldbl-96/s_setpayloadsigl.c (FUNC): Define to __setpayloadsigl. (setpayloadsigl): Define as weak alias. * sysdeps/ieee754/ldbl-96/s_totalorderl.c (totalorderl): Rename to __totalorderl and define as weak alias. * sysdeps/ieee754/ldbl-96/s_totalordermagl.c (totalordermagl): Rename to __totalordermagl and define as weak alias. * sysdeps/ieee754/ldbl-96/s_ufromfpl.c (FUNC): Define to __ufromfpl. (ufromfpl): Define as weak alias. * sysdeps/ieee754/ldbl-96/s_ufromfpxl.c (FUNC): Define to __ufromfpxl. (ufromfpxl): Define as weak alias. |
||
|
Szabolcs Nagy
|
bcea7ad608 |
Move exp compat wrappers under math/
Move exp compat wrappers to math/w_exp{,f,l}_compat.c to be
consistent with other wrappers.
* sysdeps/ieee754/dbl-64/w_exp_compat.c: Move to...
* math/w_exp_compat.c: ... here.
* sysdeps/ieee754/flt-32/w_expf_compat.c: Move to...
* math/w_expf_compat.c: ... here.
* sysdeps/ieee754/ldbl-128/w_expl_compat.c: Move to...
* math/w_expl_compat.c: ... here.
* sysdeps/ieee754/ldbl-128ibm/w_expl_compat.c: Remove.
* sysdeps/ieee754/ldbl-96/w_expl_compat.c: Remove.
* sysdeps/ieee754/ldbl-opt/w_exp_compat.c: Use the new path.
* sysdeps/ieee754/ldbl-opt/w_expl_compat.c: Likewise.
|
||
|
Joseph Myers
|
4f3647e46e |
Prefer new libm function wrappers for !LIBM_SVID_COMPAT.
The initial obsoletion of SVID libm error handling left the old wrappers and __kernel_standard still being used for new ports and static linking, just with macro definitions of _LIB_VERSION and matherr that meant symbols with those names were never actually used and the code for different error handling variants could be optimized out. This patch cleans things up further by eliminating the __kernel_standard use for new ports and static linking. Now, the old wrappers no longer generate any code in the !LIBM_SVID_COMPAT case, while the new errno-only wrappers that were added for float128 support are now also used for float, double and long double in that case. The changes are generally straightforward. The w_scalb*_compat wrappers continue to be used (scalb is obsolescent in the sense of not being supported for float128, but is present in supported standards - the 2001 edition of POSIX and earlier XSI versions - so remains supported for static linking and new ports, as do the float and long double variants that are existing GNU extensions). Those wrappers would only call __kernel_standard in the _LIB_VERSION == _SVID_ case. Since we would like to be able to compile most of glibc without optimization, relying on a static function whose only use is under an if (0) condition being optimized away to avoid an undefined __kernel_standard reference may not be a good idea. Thus, the relevant code in the scalb wrappers has LIBM_SVID_COMPAT conditionals added to guarantee it's not built at all in the case where __kernel_standard does not exist. Just as i386 has its own w_sqrt_compat.c, so w_sqrt.c is also added. ia64 gets dummy w_*.c to prevent those files being built where they would conflict with the ia64 libm, as with its existing w_*_compat.c. Conditions disabling code for !LIBM_SVID_COMPAT are needed in both the math/ wrappers and in the long double wrappers in ldbl-opt (to avoid them setting up aliases and symbol versions for undefined symbols). I hope that future cleanups to how libm function aliases and symbol versioning are done will eliminate the need for most of the ldbl-opt wrappers. Tested for x86_64 and x86, and with build-many-glibcs.py. * sysdeps/generic/math-type-macros-double.h: Include <math-svid-compat.h>. (__USE_WRAPPER_TEMPLATE): Define to !LIBM_SVID_COMPAT. * sysdeps/generic/math-type-macros-float.h: Include <math-svid-compat.h>. (__USE_WRAPPER_TEMPLATE): Define to !LIBM_SVID_COMPAT. * sysdeps/generic/math-type-macros-ldouble.h: Include <math-svid-compat.h>. (__USE_WRAPPER_TEMPLATE): Define to !LIBM_SVID_COMPAT. * math/lgamma-compat.h (BUILD_LGAMMA): Include LIBM_SVID_COMPAT condition. * math/w_acos_compat.c: Condition contents on [LIBM_SVID_COMPAT]. * math/w_acosf_compat.c: Likewise. * math/w_acosh_compat.c: Likewise. * math/w_acoshf_compat.c: Likewise. * math/w_acoshl_compat.c: Likewise. * math/w_acosl_compat.c: Likewise. * math/w_asin_compat.c: Likewise. * math/w_asinf_compat.c: Likewise. * math/w_asinl_compat.c: Likewise. * math/w_atan2_compat.c: Likewise. * math/w_atan2f_compat.c: Likewise. * math/w_atan2l_compat.c: Likewise. * math/w_atanh_compat.c: Likewise. * math/w_atanhf_compat.c: Likewise. * math/w_atanhl_compat.c: Likewise. * math/w_cosh_compat.c: Likewise. * math/w_coshf_compat.c: Likewise. * math/w_coshl_compat.c: Likewise. * math/w_exp10_compat.c: Likewise. * math/w_exp10f_compat.c: Likewise. * math/w_exp10l_compat.c: Likewise. * math/w_exp2_compat.c: Likewise. * math/w_exp2f_compat.c: Likewise. * math/w_exp2l_compat.c: Likewise. * math/w_fmod_compat.c: Likewise. * math/w_fmodf_compat.c: Likewise. * math/w_fmodl_compat.c: Likewise. * math/w_hypot_compat.c: Likewise. * math/w_hypotf_compat.c: Likewise. * math/w_hypotl_compat.c: Likewise. * math/w_j0_compat.c: Likewise. * math/w_j0f_compat.c: Likewise. * math/w_j0l_compat.c: Likewise. * math/w_j1_compat.c: Likewise. * math/w_j1f_compat.c: Likewise. * math/w_j1l_compat.c: Likewise. * math/w_jn_compat.c: Likewise. * math/w_jnf_compat.c: Likewise. * math/w_jnl_compat.c: Likewise. * math/w_lgamma_r_compat.c: Likewise. * math/w_lgammaf_r_compat.c: Likewise. * math/w_lgammal_r_compat.c: Likewise. * math/w_log10_compat.c: Likewise. * math/w_log10f_compat.c: Likewise. * math/w_log10l_compat.c: Likewise. * math/w_log2_compat.c: Likewise. * math/w_log2f_compat.c: Likewise. * math/w_log2l_compat.c: Likewise. * math/w_log_compat.c: Likewise. * math/w_logf_compat.c: Likewise. * math/w_logl_compat.c: Likewise. * math/w_pow_compat.c: Likewise. * math/w_powf_compat.c: Likewise. * math/w_powl_compat.c: Likewise. * math/w_remainder_compat.c: Likewise. * math/w_remainderf_compat.c: Likewise. * math/w_remainderl_compat.c: Likewise. * math/w_sinh_compat.c: Likewise. * math/w_sinhf_compat.c: Likewise. * math/w_sinhl_compat.c: Likewise. * math/w_sqrt_compat.c: Likewise. * math/w_sqrtf_compat.c: Likewise. * math/w_sqrtl_compat.c: Likewise. * math/w_tgamma_compat.c: Likewise. * math/w_tgammaf_compat.c: Likewise. * math/w_tgammal_compat.c: Likewise. * math/w_scalb_compat.c (sysv_scalb): Condition definition on [LIBM_SVID_COMPAT]. (__scalb): Condition call to sysv_scalb on [LIBM_SVID_COMPAT]. * math/w_scalbf_compat.c (sysv_scalbf): Condition definition on [LIBM_SVID_COMPAT]. (__scalbf): Condition call to sysv_scalbf on [LIBM_SVID_COMPAT]. * math/w_scalbl_compat.c (sysv_scalbl): Condition definition on [LIBM_SVID_COMPAT]. (__scalbl): Condition call to sysv_scalbl on [LIBM_SVID_COMPAT]. * sysdeps/i386/fpu/w_sqrt.c: New file. * sysdeps/ia64/fpu/w_acos.c: Likewise. * sysdeps/ia64/fpu/w_acosf.c: Likewise. * sysdeps/ia64/fpu/w_acosh.c: Likewise. * sysdeps/ia64/fpu/w_acoshf.c: Likewise. * sysdeps/ia64/fpu/w_acoshl.c: Likewise. * sysdeps/ia64/fpu/w_acosl.c: Likewise. * sysdeps/ia64/fpu/w_asin.c: Likewise. * sysdeps/ia64/fpu/w_asinf.c: Likewise. * sysdeps/ia64/fpu/w_asinl.c: Likewise. * sysdeps/ia64/fpu/w_atan2.c: Likewise. * sysdeps/ia64/fpu/w_atan2f.c: Likewise. * sysdeps/ia64/fpu/w_atan2l.c: Likewise. * sysdeps/ia64/fpu/w_atanh.c: Likewise. * sysdeps/ia64/fpu/w_atanhf.c: Likewise. * sysdeps/ia64/fpu/w_atanhl.c: Likewise. * sysdeps/ia64/fpu/w_cosh.c: Likewise. * sysdeps/ia64/fpu/w_coshf.c: Likewise. * sysdeps/ia64/fpu/w_coshl.c: Likewise. * sysdeps/ia64/fpu/w_exp.c: Likewise. * sysdeps/ia64/fpu/w_exp10.c: Likewise. * sysdeps/ia64/fpu/w_exp10f.c: Likewise. * sysdeps/ia64/fpu/w_exp10l.c: Likewise. * sysdeps/ia64/fpu/w_exp2.c: Likewise. * sysdeps/ia64/fpu/w_exp2f.c: Likewise. * sysdeps/ia64/fpu/w_exp2l.c: Likewise. * sysdeps/ia64/fpu/w_expf.c: Likewise. * sysdeps/ia64/fpu/w_expl.c: Likewise. * sysdeps/ia64/fpu/w_fmod.c: Likewise. * sysdeps/ia64/fpu/w_fmodf.c: Likewise. * sysdeps/ia64/fpu/w_fmodl.c: Likewise. * sysdeps/ia64/fpu/w_hypot.c: Likewise. * sysdeps/ia64/fpu/w_hypotf.c: Likewise. * sysdeps/ia64/fpu/w_hypotl.c: Likewise. * sysdeps/ia64/fpu/w_lgamma_r.c: Likewise. * sysdeps/ia64/fpu/w_lgammaf_r.c: Likewise. * sysdeps/ia64/fpu/w_lgammal_r.c: Likewise. * sysdeps/ia64/fpu/w_log.c: Likewise. * sysdeps/ia64/fpu/w_log10.c: Likewise. * sysdeps/ia64/fpu/w_log10f.c: Likewise. * sysdeps/ia64/fpu/w_log10l.c: Likewise. * sysdeps/ia64/fpu/w_log2.c: Likewise. * sysdeps/ia64/fpu/w_log2f.c: Likewise. * sysdeps/ia64/fpu/w_log2l.c: Likewise. * sysdeps/ia64/fpu/w_logf.c: Likewise. * sysdeps/ia64/fpu/w_logl.c: Likewise. * sysdeps/ia64/fpu/w_pow.c: Likewise. * sysdeps/ia64/fpu/w_powf.c: Likewise. * sysdeps/ia64/fpu/w_powl.c: Likewise. * sysdeps/ia64/fpu/w_remainder.c: Likewise. * sysdeps/ia64/fpu/w_remainderf.c: Likewise. * sysdeps/ia64/fpu/w_remainderl.c: Likewise. * sysdeps/ia64/fpu/w_sinh.c: Likewise. * sysdeps/ia64/fpu/w_sinhf.c: Likewise. * sysdeps/ia64/fpu/w_sinhl.c: Likewise. * sysdeps/ia64/fpu/w_sqrt.c: Likewise. * sysdeps/ia64/fpu/w_sqrtf.c: Likewise. * sysdeps/ia64/fpu/w_sqrtl.c: Likewise. * sysdeps/ia64/fpu/w_tgamma.c: Likewise. * sysdeps/ia64/fpu/w_tgammaf.c: Likewise. * sysdeps/ia64/fpu/w_tgammal.c: Likewise. * sysdeps/ieee754/dbl-64/w_exp_compat.c: Condition contents on [LIBM_SVID_COMPAT]. * sysdeps/ieee754/flt-32/w_expf_compat.c: Likewise. * sysdeps/ieee754/k_standard.c: Likewise. * sysdeps/ieee754/k_standardf.c: Likewise. * sysdeps/ieee754/k_standardl.c: Likewise. * sysdeps/ieee754/ldbl-128/w_expl_compat.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/w_expl_compat.c: Likewise. * sysdeps/ieee754/ldbl-96/w_expl_compat.c: Likewise. * sysdeps/ieee754/ldbl-64-128/w_expl_compat.c: Condition long_double_symbol call on [LIBM_SVID_COMPAT]. * sysdeps/ieee754/ldbl-opt/w_acoshl_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_acosl_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_asinl_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_atan2l_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_atanhl_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_coshl_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_fmodl_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_hypotl_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_j0l_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_j1l_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_jnl_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_lgammal_r_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_log10l_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_log2l_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_logl_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_powl_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_remainderl_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_sinhl_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_sqrtl_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_tgammal_compat.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_exp10l_compat.c: Condition long_double_symbol and compat_symbol calls on [LIBM_SVID_COMPAT]. |
||
|
Szabolcs Nagy
|
8aa48656bb |
Fix CFLAGS override in sysdeps/ieee754/dbl-64
Use += instead of = to avoid overriding target specific CFLAGS settings. Ideally the settings in target Makefiles would have precedence, but the Makefile inclusion order does not allow that, with this fix at least the target settings are not dropped. |
||
|
Joseph Myers
|
813378e9fe |
Obsolete matherr, _LIB_VERSION, libieee.a.
This patch obsoletes support for SVID libm error handling (the system where a user-defined function matherr is called on a libm function error; only enabled if you also set _LIB_VERSION = _SVID_ or _LIB_VERSION = _XOPEN_) and the use of the _LIB_VERSION global variable to control libm error handling. matherr and _LIB_VERSION are made into compat symbols, not supported for new ports or for static linking. The libieee.a object file (which sets _LIB_VERSION = _IEEE_, so disabling errno setting for some functions) is also removed, and all the related definitions are removed from math.h. The manual already recommends against using matherr, and it's already not supported for _Float128 functions (those use new wrappers that don't support matherr, only errno) - this patch means that it becomes possible to e.g. add sinf32 as an alias to sinf without that resulting in undesired matherr support in sinf32 for existing glibc ports. matherr support is not part of any standard supported by glibc (it was removed in XPG4). Because matherr is a function to be defined by the user, of course user programs defining such a function will still continue to link; it just quietly won't be used. If they try to write to the library's copy of _LIB_VERSION to enable SVID error handling, however, they will get a link error (but if they define their own _LIB_VERSION variable, they won't). I expect the most likely case of build failures from this patch to be programs with unconditional cargo-culted uses of -lieee (based on a notion of "I want IEEE floating point", not any actual requirement for that library). Ideally, the new-port-or-static-linking case would use the new wrappers used for _Float128. This is not implemented in this patch, because of the complication of architecture-specific (powerpc32 and sparc) sqrt wrappers that use _LIB_VERSION and __kernel_standard directly. Thus, the old wrappers and __kernel_standard are still built unconditionally, and _LIB_VERSION still exists in static libm. But when the old wrappers and __kernel_standard are built in the non-compat case, _LIB_VERSION and matherr are defined as macros so code to support those features isn't actually built into static libm or new ports' shared libm after this patch. I intend to move to the new wrappers for static libm and new ports in followup patches. I believe the sqrt wrappers for powerpc32 and sparc can reasonably be removed. GCC already optimizes the normal case of sqrt by generating code that uses a hardware instruction and only calls the sqrt function if the argument was negative (if -fno-math-errno, of course, it just uses the hardware instruction without any check for negative argument being needed). Thus those wrappers will only actually get called in the case of negative arguments, which is not a case it makes sense to optimize for. But even without removing the powerpc32 and sparc wrappers it should still be possible to move to the new wrappers for static libm and new ports, just without having those dubious architecture-specific optimizations in static libm. Everything said about matherr equally applies to matherrf and matherrl (IA64-specific, undocumented), except that the structure of IA64 libm means it won't be converted to using the new wrappers (it doesn't use the old ones either, but its own error-handling code instead). As with other tests of compat symbols, I expect test-matherr and test-matherr-2 to need to become appropriately conditional once we have a system for disabling such tests for ports too new to have the relevant symbols. Tested for x86_64 and x86, and with build-many-glibcs.py. * math/math.h [__USE_MISC] (_LIB_VERSION_TYPE): Remove. [__USE_MISC] (_LIB_VERSION): Likewise. [__USE_MISC] (struct exception): Likewise. [__USE_MISC] (matherr): Likewise. [__USE_MISC] (DOMAIN): Likewise. [__USE_MISC] (SING): Likewise. [__USE_MISC] (OVERFLOW): Likewise. [__USE_MISC] (UNDERFLOW): Likewise. [__USE_MISC] (TLOSS): Likewise. [__USE_MISC] (PLOSS): Likewise. [__USE_MISC] (HUGE): Likewise. [__USE_XOPEN] (MAXFLOAT): Define even if [__USE_MISC]. * math/math-svid-compat.h: New file. * conform/linknamespace.pl (@whitelist): Remove matherr, matherrf and matherrl. * include/math.h [!_ISOMAC] (__matherr): Remove. * manual/arith.texi (FP Exceptions): Do not document matherr. * math/Makefile (tests): Change test-matherr to test-matherr-3. (tests-internal): New variable. (install-lib): Do not add libieee.a. (non-lib.a): Likewise. (extra-objs): Do not add libieee.a and ieee-math.o. (CPPFLAGS-s_lib_version.c): Remove variable. ($(objpfx)libieee.a): Remove rule. ($(addprefix $(objpfx), $(tests-internal)): Depend on $(libm). * math/ieee-math.c: Remove. * math/libm-test-support.c (matherr): Remove. * math/test-matherr.c: Use <support/test-driver.c>. Add copyright and license notices. Include <math-svid-compat.h> and <shlib-compat.h>. (matherr): Undefine as macro. Use compat_symbol_reference. (_LIB_VERSION): Likewise. * math/test-matherr-2.c: New file. * math/test-matherr-3.c: Likewise. * sysdeps/generic/math_private.h (__kernel_standard): Remove declaration. (__kernel_standard_f): Likewise. (__kernel_standard_l): Likewise. * sysdeps/ieee754/s_lib_version.c: Do not include <math.h> or <math_private.h>. Include <math-svid-compat.h>. (_LIB_VERSION): Undefine as macro. (_LIB_VERSION_INTERNAL): Always initialize to _POSIX_. Define only if [LIBM_SVID_COMPAT || !defined SHARED]. If [LIBM_SVID_COMPAT], use compat_symbol. * sysdeps/ieee754/s_matherr.c: Do not include <math.h> or <math_private.h>. Include <math-svid-compat.h>. (matherr): Undefine as macro. (__matherr): Define only if [LIBM_SVID_COMPAT]. Use compat_symbol. * sysdeps/ia64/fpu/libm_error.c: Include <math-svid-compat.h>. [_LIBC && LIBM_SVID_COMPAT] (matherrf): Use compat_symbol_reference. [_LIBC && LIBM_SVID_COMPAT] (matherrl): Likewise. [_LIBC && !LIBM_SVID_COMPAT] (matherrf): Define as macro. [_LIBC && !LIBM_SVID_COMPAT] (matherrl): Likewise. * sysdeps/ia64/fpu/libm_support.h: Include <math-svid-compat.h>. (MATHERR_D): Remove declaration. [!_LIBC] (_LIB_VERSION_TYPE): Likewise [!LIBM_BUILD] (_LIB_VERSIONIMF): Likewise. [LIBM_BUILD] (pmatherrf): Likewise. [LIBM_BUILD] (pmatherr): Likewise. [LIBM_BUILD] (pmatherrl): Likewise. (DOMAIN): Likewise. (SING): Likewise. (OVERFLOW): Likewise. (UNDERFLOW): Likewise. (TLOSS): Likewise. (PLOSS): Likewise. * sysdeps/ia64/fpu/s_matherrf.c: Include <math-svid-compat.h>. (__matherrf): Define only if [LIBM_SVID_COMPAT]. Use compat_symbol. * sysdeps/ia64/fpu/s_matherrl.c: Include <math-svid-compat.h>. (__matherrl): Define only if [LIBM_SVID_COMPAT]. Use compat_symbol. * math/lgamma-compat.h: Include <math-svid-compat.h>. * math/w_acos_compat.c: Likewise. * math/w_acosf_compat.c: Likewise. * math/w_acosh_compat.c: Likewise. * math/w_acoshf_compat.c: Likewise. * math/w_acoshl_compat.c: Likewise. * math/w_acosl_compat.c: Likewise. * math/w_asin_compat.c: Likewise. * math/w_asinf_compat.c: Likewise. * math/w_asinl_compat.c: Likewise. * math/w_atan2_compat.c: Likewise. * math/w_atan2f_compat.c: Likewise. * math/w_atan2l_compat.c: Likewise. * math/w_atanh_compat.c: Likewise. * math/w_atanhf_compat.c: Likewise. * math/w_atanhl_compat.c: Likewise. * math/w_cosh_compat.c: Likewise. * math/w_coshf_compat.c: Likewise. * math/w_coshl_compat.c: Likewise. * math/w_exp10_compat.c: Likewise. * math/w_exp10f_compat.c: Likewise. * math/w_exp10l_compat.c: Likewise. * math/w_exp2_compat.c: Likewise. * math/w_exp2f_compat.c: Likewise. * math/w_exp2l_compat.c: Likewise. * math/w_fmod_compat.c: Likewise. * math/w_fmodf_compat.c: Likewise. * math/w_fmodl_compat.c: Likewise. * math/w_hypot_compat.c: Likewise. * math/w_hypotf_compat.c: Likewise. * math/w_hypotl_compat.c: Likewise. * math/w_j0_compat.c: Likewise. * math/w_j0f_compat.c: Likewise. * math/w_j0l_compat.c: Likewise. * math/w_j1_compat.c: Likewise. * math/w_j1f_compat.c: Likewise. * math/w_j1l_compat.c: Likewise. * math/w_jn_compat.c: Likewise. * math/w_jnf_compat.c: Likewise. * math/w_jnl_compat.c: Likewise. * math/w_lgamma_main.c: Likewise. * math/w_lgamma_r_compat.c: Likewise. * math/w_lgammaf_main.c: Likewise. * math/w_lgammaf_r_compat.c: Likewise. * math/w_lgammal_main.c: Likewise. * math/w_lgammal_r_compat.c: Likewise. * math/w_log10_compat.c: Likewise. * math/w_log10f_compat.c: Likewise. * math/w_log10l_compat.c: Likewise. * math/w_log2_compat.c: Likewise. * math/w_log2f_compat.c: Likewise. * math/w_log2l_compat.c: Likewise. * math/w_log_compat.c: Likewise. * math/w_logf_compat.c: Likewise. * math/w_logl_compat.c: Likewise. * math/w_pow_compat.c: Likewise. * math/w_powf_compat.c: Likewise. * math/w_powl_compat.c: Likewise. * math/w_remainder_compat.c: Likewise. * math/w_remainderf_compat.c: Likewise. * math/w_remainderl_compat.c: Likewise. * math/w_scalb_compat.c: Likewise. * math/w_scalbf_compat.c: Likewise. * math/w_scalbl_compat.c: Likewise. * math/w_sinh_compat.c: Likewise. * math/w_sinhf_compat.c: Likewise. * math/w_sinhl_compat.c: Likewise. * math/w_sqrt_compat.c: Likewise. * math/w_sqrtf_compat.c: Likewise. * math/w_sqrtl_compat.c: Likewise. * math/w_tgamma_compat.c: Likewise. * math/w_tgammaf_compat.c: Likewise. * math/w_tgammal_compat.c: Likewise. * sysdeps/ieee754/dbl-64/w_exp_compat.c: Likewise. * sysdeps/ieee754/flt-32/w_expf_compat.c: Likewise. * sysdeps/ieee754/k_standard.c: Likewise. * sysdeps/ieee754/k_standardf.c: Likewise. * sysdeps/ieee754/k_standardl.c: Likewise. * sysdeps/ieee754/ldbl-128/w_expl_compat.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/w_expl_compat.c: Likewise. * sysdeps/ieee754/ldbl-96/w_expl_compat.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/w_sqrt_compat.S: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/w_sqrtf_compat.S: Likewise. * sysdeps/powerpc/powerpc32/power5/fpu/w_sqrt_compat.S: Likewise. * sysdeps/powerpc/powerpc32/power5/fpu/w_sqrtf_compat.S: Likewise. * sysdeps/sparc/sparc32/fpu/w_sqrt_compat.S: Likewise. * sysdeps/sparc/sparc32/fpu/w_sqrtf_compat.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrt_compat-vis3.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrtf_compat-vis3.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrt_compat.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrtf_compat.S: Likewise. * sysdeps/sparc/sparc64/fpu/w_sqrt_compat.S: Likewise. * sysdeps/sparc/sparc64/fpu/w_sqrtf_compat.S: Likewise. |
||
|
Joseph Myers
|
24ab7723b8 |
Consistently use uintN_t not u_intN_t in libm.
This patch changes libm code to make consistent use of C99 uintN_t types instead of sometimes using those and sometimes using the older nonstandard u_intN_t names. This makes sense as a cleanup in its own right, and also facilitates merges to GCC's libquadmath (which gets the types from stdint.h and so may not have u_intN_t available at all). Tested for x86_64, and with build-many-glibcs.py. * math/s_nextafter.c (__nextafter): Use uintN_t instead of u_intN_t. * math/s_nexttowardf.c (__nexttowardf): Likewise. * sysdeps/generic/math_private.h (ieee_double_shape_type): Likewise. (ieee_float_shape_type): Likewise. * sysdeps/i386/fpu/s_fpclassifyl.c (__fpclassifyl): Likewise. * sysdeps/i386/fpu/s_isnanl.c (__isnanl): Likewise. * sysdeps/i386/fpu/s_nextafterl.c (__nextafterl): Likewise. * sysdeps/i386/fpu/s_nexttoward.c (__nexttoward): Likewise. * sysdeps/i386/fpu/s_nexttowardf.c (__nexttowardf): Likewise. * sysdeps/ieee754/dbl-64/e_acosh.c (__ieee754_acosh): Likewise. * sysdeps/ieee754/dbl-64/e_cosh.c (__ieee754_cosh): Likewise. * sysdeps/ieee754/dbl-64/e_fmod.c (__ieee754_fmod): Likewise. * sysdeps/ieee754/dbl-64/e_gamma_r.c (__ieee754_gamma_r): Likewise. * sysdeps/ieee754/dbl-64/e_hypot.c (__ieee754_hypot): Likewise. * sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_jn): Likewise. (__ieee754_yn): Likewise. * sysdeps/ieee754/dbl-64/e_log10.c (__ieee754_log10): Likewise. * sysdeps/ieee754/dbl-64/e_log2.c (__ieee754_log2): Likewise. * sysdeps/ieee754/dbl-64/e_rem_pio2.c (__ieee754_rem_pio2): Likewise. * sysdeps/ieee754/dbl-64/e_sinh.c (__ieee754_sinh): Likewise. * sysdeps/ieee754/dbl-64/s_ceil.c (__ceil): Likewise. * sysdeps/ieee754/dbl-64/s_copysign.c (__copysign): Likewise. * sysdeps/ieee754/dbl-64/s_erf.c (__erf): Likewise. (__erfc): Likewise. * sysdeps/ieee754/dbl-64/s_expm1.c (__expm1): Likewise. * sysdeps/ieee754/dbl-64/s_finite.c (FINITE): Likewise. * sysdeps/ieee754/dbl-64/s_floor.c (__floor): Likewise. * sysdeps/ieee754/dbl-64/s_fpclassify.c (__fpclassify): Likewise. * sysdeps/ieee754/dbl-64/s_isnan.c (__isnan): Likewise. * sysdeps/ieee754/dbl-64/s_issignaling.c (__issignaling): Likewise. * sysdeps/ieee754/dbl-64/s_llrint.c (__llrint): Likewise. * sysdeps/ieee754/dbl-64/s_llround.c (__llround): Likewise. * sysdeps/ieee754/dbl-64/s_lrint.c (__lrint): Likewise. * sysdeps/ieee754/dbl-64/s_lround.c (__lround): Likewise. * sysdeps/ieee754/dbl-64/s_modf.c (__modf): Likewise. * sysdeps/ieee754/dbl-64/s_nextup.c (__nextup): Likewise. * sysdeps/ieee754/dbl-64/s_remquo.c (__remquo): Likewise. * sysdeps/ieee754/dbl-64/s_round.c (__round): Likewise. * sysdeps/ieee754/dbl-64/s_trunc.c (__trunc): Likewise. * sysdeps/ieee754/dbl-64/wordsize-64/s_issignaling.c (__issignaling): Likewise. * sysdeps/ieee754/flt-32/e_atan2f.c (__ieee754_atan2f): Likewise. * sysdeps/ieee754/flt-32/e_fmodf.c (__ieee754_fmodf): Likewise. * sysdeps/ieee754/flt-32/e_gammaf_r.c (__ieee754_gammaf_r): Likewise. * sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_ynf): Likewise. * sysdeps/ieee754/flt-32/e_log10f.c (__ieee754_log10f): Likewise. * sysdeps/ieee754/flt-32/e_powf.c (__ieee754_powf): Likewise. * sysdeps/ieee754/flt-32/e_rem_pio2f.c (__ieee754_rem_pio2f): Likewise. * sysdeps/ieee754/flt-32/e_remainderf.c (__ieee754_remainderf): Likewise. * sysdeps/ieee754/flt-32/e_sqrtf.c (__ieee754_sqrtf): Likewise. * sysdeps/ieee754/flt-32/s_ceilf.c (__ceilf): Likewise. * sysdeps/ieee754/flt-32/s_copysignf.c (__copysignf): Likewise. * sysdeps/ieee754/flt-32/s_erff.c (__erff): Likewise. (__erfcf): Likewise. * sysdeps/ieee754/flt-32/s_expm1f.c (__expm1f): Likewise. * sysdeps/ieee754/flt-32/s_finitef.c (FINITEF): Likewise. * sysdeps/ieee754/flt-32/s_floorf.c (__floorf): Likewise. * sysdeps/ieee754/flt-32/s_fpclassifyf.c (__fpclassifyf): Likewise. * sysdeps/ieee754/flt-32/s_isnanf.c (__isnanf): Likewise. * sysdeps/ieee754/flt-32/s_issignalingf.c (__issignalingf): Likewise. * sysdeps/ieee754/flt-32/s_llrintf.c (__llrintf): Likewise. * sysdeps/ieee754/flt-32/s_llroundf.c (__llroundf): Likewise. * sysdeps/ieee754/flt-32/s_lrintf.c (__lrintf): Likewise. * sysdeps/ieee754/flt-32/s_lroundf.c (__lroundf): Likewise. * sysdeps/ieee754/flt-32/s_modff.c (__modff): Likewise. * sysdeps/ieee754/flt-32/s_remquof.c (__remquof): Likewise. * sysdeps/ieee754/flt-32/s_roundf.c (__roundf): Likewise. * sysdeps/ieee754/ldbl-128/e_acoshl.c (__ieee754_acoshl): Likewise. * sysdeps/ieee754/ldbl-128/e_atan2l.c (__ieee754_atan2l): Likewise. * sysdeps/ieee754/ldbl-128/e_atanhl.c (__ieee754_atanhl): Likewise. * sysdeps/ieee754/ldbl-128/e_fmodl.c (__ieee754_fmodl): Likewise. * sysdeps/ieee754/ldbl-128/e_gammal_r.c (__ieee754_gammal_r): Likewise. * sysdeps/ieee754/ldbl-128/e_hypotl.c (__ieee754_hypotl): Likewise. * sysdeps/ieee754/ldbl-128/e_jnl.c (__ieee754_jnl): Likewise. (__ieee754_ynl): Likewise. * sysdeps/ieee754/ldbl-128/e_powl.c (__ieee754_powl): Likewise. * sysdeps/ieee754/ldbl-128/e_rem_pio2l.c (__ieee754_rem_pio2l): Likewise. * sysdeps/ieee754/ldbl-128/e_remainderl.c (__ieee754_remainderl): Likewise. * sysdeps/ieee754/ldbl-128/e_sinhl.c (__ieee754_sinhl): Likewise. * sysdeps/ieee754/ldbl-128/k_cosl.c (__kernel_cosl): Likewise. * sysdeps/ieee754/ldbl-128/k_sincosl.c (__kernel_sincosl): Likewise. * sysdeps/ieee754/ldbl-128/k_sinl.c (__kernel_sinl): Likewise. * sysdeps/ieee754/ldbl-128/s_ceill.c (__ceill): Likewise. * sysdeps/ieee754/ldbl-128/s_copysignl.c (__copysignl): Likewise. * sysdeps/ieee754/ldbl-128/s_erfl.c (__erfcl): Likewise. * sysdeps/ieee754/ldbl-128/s_fabsl.c (__fabsl): Likewise. * sysdeps/ieee754/ldbl-128/s_finitel.c (__finitel): Likewise. * sysdeps/ieee754/ldbl-128/s_floorl.c (__floorl): Likewise. * sysdeps/ieee754/ldbl-128/s_fpclassifyl.c (__fpclassifyl): Likewise. * sysdeps/ieee754/ldbl-128/s_frexpl.c (__frexpl): Likewise. * sysdeps/ieee754/ldbl-128/s_isnanl.c (__isnanl): Likewise. * sysdeps/ieee754/ldbl-128/s_issignalingl.c (__issignalingl): Likewise. * sysdeps/ieee754/ldbl-128/s_llrintl.c (__llrintl): Likewise. * sysdeps/ieee754/ldbl-128/s_llroundl.c (__llroundl): Likewise. * sysdeps/ieee754/ldbl-128/s_lrintl.c (__lrintl): Likewise. * sysdeps/ieee754/ldbl-128/s_lroundl.c (__lroundl): Likewise. * sysdeps/ieee754/ldbl-128/s_modfl.c (__modfl): Likewise. * sysdeps/ieee754/ldbl-128/s_nearbyintl.c (__nearbyintl): Likewise. * sysdeps/ieee754/ldbl-128/s_nextafterl.c (__nextafterl): Likewise. * sysdeps/ieee754/ldbl-128/s_nexttoward.c (__nexttoward): Likewise. * sysdeps/ieee754/ldbl-128/s_nexttowardf.c (__nexttowardf): Likewise. * sysdeps/ieee754/ldbl-128/s_nextupl.c (__nextupl): Likewise. * sysdeps/ieee754/ldbl-128/s_remquol.c (__remquol): Likewise. * sysdeps/ieee754/ldbl-128/s_rintl.c (__rintl): Likewise. * sysdeps/ieee754/ldbl-128/s_roundl.c (__roundl): Likewise. * sysdeps/ieee754/ldbl-128/s_tanhl.c (__tanhl): Likewise. * sysdeps/ieee754/ldbl-128/s_truncl.c (__truncl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_fmodl.c (__ieee754_fmodl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c (__ieee754_gammal_r): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_powl.c (__ieee754_powl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_rem_pio2l.c (__ieee754_rem_pio2l): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_remainderl.c (__ieee754_remainderl): Likewise. * sysdeps/ieee754/ldbl-128ibm/k_cosl.c (__kernel_cosl): Likewise. * sysdeps/ieee754/ldbl-128ibm/k_sinl.c (__kernel_sinl): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fabsl.c (__fabsl): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fpclassifyl.c (___fpclassifyl): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_modfl.c (__modfl): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_nexttowardf.c (__nexttowardf): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_remquol.c (__remquol): Likewise. * sysdeps/ieee754/ldbl-96/e_acoshl.c (__ieee754_acoshl): Likewise. * sysdeps/ieee754/ldbl-96/e_asinl.c (__ieee754_asinl): Likewise. * sysdeps/ieee754/ldbl-96/e_atanhl.c (__ieee754_atanhl): Likewise. * sysdeps/ieee754/ldbl-96/e_coshl.c (__ieee754_coshl): Likewise. * sysdeps/ieee754/ldbl-96/e_gammal_r.c (__ieee754_gammal_r): Likewise. * sysdeps/ieee754/ldbl-96/e_hypotl.c (__ieee754_hypotl): Likewise. * sysdeps/ieee754/ldbl-96/e_j0l.c (__ieee754_j0l): Likewise. (__ieee754_y0l): Likewise. (pzero): Likewise. (qzero): Likewise. * sysdeps/ieee754/ldbl-96/e_j1l.c (__ieee754_j1l): Likewise. (__ieee754_y1l): Likewise. (pone): Likewise. (qone): Likewise. * sysdeps/ieee754/ldbl-96/e_jnl.c (__ieee754_jnl): Likewise. (__ieee754_ynl): Likewise. * sysdeps/ieee754/ldbl-96/e_lgammal_r.c (sin_pi): Likewise. (__ieee754_lgammal_r): Likewise. * sysdeps/ieee754/ldbl-96/e_rem_pio2l.c (__ieee754_rem_pio2l): Likewise. * sysdeps/ieee754/ldbl-96/e_sinhl.c (__ieee754_sinhl): Likewise. * sysdeps/ieee754/ldbl-96/s_copysignl.c (__copysignl): Likewise. * sysdeps/ieee754/ldbl-96/s_erfl.c (__erfl): Likewise. (__erfcl): Likewise. * sysdeps/ieee754/ldbl-96/s_frexpl.c (__frexpl): Likewise. * sysdeps/ieee754/ldbl-96/s_issignalingl.c (__issignalingl): Likewise. * sysdeps/ieee754/ldbl-96/s_llrintl.c (__llrintl): Likewise. * sysdeps/ieee754/ldbl-96/s_llroundl.c (__llroundl): Likewise. * sysdeps/ieee754/ldbl-96/s_lrintl.c (__lrintl): Likewise. * sysdeps/ieee754/ldbl-96/s_lroundl.c (__lroundl): Likewise. * sysdeps/ieee754/ldbl-96/s_modfl.c (__modfl): Likewise. * sysdeps/ieee754/ldbl-96/s_nexttoward.c (__nexttoward): Likewise. * sysdeps/ieee754/ldbl-96/s_nexttowardf.c (__nexttowardf): Likewise. * sysdeps/ieee754/ldbl-96/s_nextupl.c (__nextupl): Likewise. * sysdeps/ieee754/ldbl-96/s_remquol.c (__remquol): Likewise. * sysdeps/ieee754/ldbl-96/s_roundl.c (__roundl): Likewise. * sysdeps/ieee754/ldbl-96/s_tanhl.c (__tanhl): Likewise. * sysdeps/ieee754/ldbl-opt/s_nexttowardfd.c (__nldbl_nexttowardf): Likewise. * sysdeps/m68k/m680x0/fpu/e_pow.c (s(__ieee754_pow)): Likewise. * sysdeps/m68k/m680x0/fpu/s_fpclassifyl.c (__fpclassifyl): Likewise. * sysdeps/m68k/m680x0/fpu/s_llrint.c (__llrint): Likewise. * sysdeps/m68k/m680x0/fpu/s_llrintf.c (__llrintf): Likewise. * sysdeps/m68k/m680x0/fpu/s_llrintl.c (__llrintl): Likewise. * sysdeps/m68k/m680x0/fpu/s_nextafterl.c (__nextafterl): Likewise. * sysdeps/x86/fpu/powl_helper.c (__powl_helper): Likewise. |
||
Zack Weinberg
|
9090848d06 |
Narrowing the visibility of libc-internal.h even further.
posix/wordexp-test.c used libc-internal.h for PTR_ALIGN_DOWN; similar
to what was done with libc-diag.h, I have split the definitions of
cast_to_integer, ALIGN_UP, ALIGN_DOWN, PTR_ALIGN_UP, and PTR_ALIGN_DOWN
to a new header, libc-pointer-arith.h.
It then occurred to me that the remaining declarations in libc-internal.h
are mostly to do with early initialization, and probably most of the
files including it, even in the core code, don't need it anymore. Indeed,
only 19 files actually need what remains of libc-internal.h. 23 others
need libc-diag.h instead, and 12 need libc-pointer-arith.h instead.
No file needs more than one of them, and 16 don't need any of them!
So, with this patch, libc-internal.h stops including libc-diag.h as
well as losing the pointer arithmetic macros, and all including files
are adjusted.
* include/libc-pointer-arith.h: New file. Define
cast_to_integer, ALIGN_UP, ALIGN_DOWN, PTR_ALIGN_UP, and
PTR_ALIGN_DOWN here.
* include/libc-internal.h: Definitions of above macros
moved from here. Don't include libc-diag.h anymore either.
* posix/wordexp-test.c: Include stdint.h and libc-pointer-arith.h.
Don't include libc-internal.h.
* debug/pcprofile.c, elf/dl-tunables.c, elf/soinit.c, io/openat.c
* io/openat64.c, misc/ptrace.c, nptl/pthread_clock_gettime.c
* nptl/pthread_clock_settime.c, nptl/pthread_cond_common.c
* string/strcoll_l.c, sysdeps/nacl/brk.c
* sysdeps/unix/clock_settime.c
* sysdeps/unix/sysv/linux/i386/get_clockfreq.c
* sysdeps/unix/sysv/linux/ia64/get_clockfreq.c
* sysdeps/unix/sysv/linux/powerpc/get_clockfreq.c
* sysdeps/unix/sysv/linux/sparc/sparc64/get_clockfreq.c:
Don't include libc-internal.h.
* elf/get-dynamic-info.h, iconv/loop.c
* iconvdata/iso-2022-cn-ext.c, locale/weight.h, locale/weightwc.h
* misc/reboot.c, nis/nis_table.c, nptl_db/thread_dbP.h
* nscd/connections.c, resolv/res_send.c, soft-fp/fmadf4.c
* soft-fp/fmasf4.c, soft-fp/fmatf4.c, stdio-common/vfscanf.c
* sysdeps/ieee754/dbl-64/e_lgamma_r.c
* sysdeps/ieee754/dbl-64/k_rem_pio2.c
* sysdeps/ieee754/flt-32/e_lgammaf_r.c
* sysdeps/ieee754/flt-32/k_rem_pio2f.c
* sysdeps/ieee754/ldbl-128/k_tanl.c
* sysdeps/ieee754/ldbl-128ibm/k_tanl.c
* sysdeps/ieee754/ldbl-96/e_lgammal_r.c
* sysdeps/ieee754/ldbl-96/k_tanl.c, sysdeps/nptl/futex-internal.h:
Include libc-diag.h instead of libc-internal.h.
* elf/dl-load.c, elf/dl-reloc.c, locale/programs/locarchive.c
* nptl/nptl-init.c, string/strcspn.c, string/strspn.c
* malloc/malloc.c, sysdeps/i386/nptl/tls.h
* sysdeps/nacl/dl-map-segments.h, sysdeps/x86_64/atomic-machine.h
* sysdeps/unix/sysv/linux/spawni.c
* sysdeps/x86_64/nptl/tls.h:
Include libc-pointer-arith.h instead of libc-internal.h.
* elf/get-dynamic-info.h, sysdeps/nacl/dl-map-segments.h
* sysdeps/x86_64/atomic-machine.h:
Add multiple include guard.
|
||
Tulio Magno Quites Machado Filho
|
51b34a9c47 |
Fix lgamma*, log10* and log2* results [BZ #21171]
lgamma(-x) should return +Inf and raise divide-by-zero. log10(+-0) and log2(+-0) should return -Inf and raise divide-by-zero. Tested on powerpc, powerpc64, powerpc64le and x86_64. [BZ #21171] * sysdeps/ieee754/dbl-64/e_lgamma_r.c (__ieee754_lgamma_r): Return +Inf and raise divide-by-zero when x is negative. * sysdeps/ieee754/flt-32/e_lgammaf_r.c (__ieee754_lgammaf_r): Likewise. * sysdeps/ieee754/ldbl-128/e_lgammal_r.c (__ieee754_lgammal_r): Likewise. * sysdeps/ieee754/dbl-64/e_log10.c (__ieee754_log10): Return -Inf and raise divide-by-zero when x = +-0. * sysdeps/ieee754/dbl-64/e_log2.c (__ieee754_log2): Likewise. * sysdeps/ieee754/flt-32/e_log10f.c (__ieee754_log10f): Likewise. * sysdeps/ieee754/flt-32/e_log2f.c (__ieee754_log2f): Likewise. * sysdeps/ieee754/ldbl-128/e_log10l.c (__ieee754_log10l): Likewise. * sysdeps/ieee754/ldbl-128/e_log2l.c (__ieee754_log2l): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_log10l.c (__ieee754_log10l): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_log2l.c (__ieee754_log2l): Likewise. |
||
Gabriel F. T. Gomes
|
4918e5f4cd |
Fix y0 and y1 exception handling for zero input [BZ #21134]
The Bessel functions of the second type (Yn) should raise the "divide by zero" exception when input is zero (both positive and negative). Current code gives the right output, but fails to set the exception. This error is exposed for float, double, and long double when linking with -lieee. Without this flag, the error is not exposed, because the wrappers for these functions, which use __kernel_standard functionality, set the exception as expected. Tested for powerpc64le. [BZ #21134] * sysdeps/ieee754/dbl-64/e_j0.c (__ieee754_y0): Raise the "divide by zero" exception when the input is zero. * sysdeps/ieee754/dbl-64/e_j1.c (__ieee754_y1): Likewise. * sysdeps/ieee754/flt-32/e_j0f.c (__ieee754_y0f): Likewise. * sysdeps/ieee754/flt-32/e_j1f.c (__ieee754_y1f): Likewise. * sysdeps/ieee754/ldbl-128/e_j0l.c (__ieee754_y0l): Likewise. * sysdeps/ieee754/ldbl-128/e_j1l.c (__ieee754_y1l): Likewise. |
||
|
Gabriel F. T. Gomes
|
5ab621c347 |
Move w_exp to libm-compat-call-auto
This patch adds the "_compat" suffix to the wrappers of the function exp, which use _LIB_VERSION / matherr / __kernel_standard functionality. Tested for powerpc64le, s390, and x86_64. * math/Makefile (libm-calls): Move w_exp... (libm-compat-calls-auto): Here. * math/w_expl.c: Add suffix "_compat" to filename. * sysdeps/ia64/fpu/w_expl.c: Likewise. * sysdeps/ia64/fpu/w_expf.c: Likewise. * sysdeps/ia64/fpu/w_exp.c: Likewise. * sysdeps/ieee754/dbl-64/w_exp.c: Likewise. * sysdeps/ieee754/flt-32/w_expf.c: Likewise. * sysdeps/ieee754/ldbl-128/w_expl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/w_expl.c: Likewise. * sysdeps/ieee754/ldbl-96/w_expl.c: Likewise. * math/w_expl_compat.c: New file, copied from above. * sysdeps/ia64/fpu/w_exp_compat.c: Likewise. * sysdeps/ia64/fpu/w_expf_compat.c: Likewise. * sysdeps/ia64/fpu/w_expl_compat.c: Likewise. * sysdeps/ieee754/dbl-64/w_exp_compat.c: Likewise. * sysdeps/ieee754/flt-32/w_expf_compat.c: Likewise. * sysdeps/ieee754/ldbl-128/w_expl_compat.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/w_expl_compat.c: Likewise. * sysdeps/ieee754/ldbl-96/w_expl_compat.c: Likewise. * sysdeps/ieee754/ldbl-64-128/w_expl.c: Add suffix "_compat" to filename. * sysdeps/ieee754/ldbl-opt/w_exp.c: Likewise. * sysdeps/ieee754/ldbl-64-128/w_expl_compat.c: New file, copied from above and adjusted for the new filenames. * sysdeps/ieee754/ldbl-opt/w_exp_compat.c: Likewise. |
||
|
Joseph Myers
|
bfff8b1bec | Update copyright dates with scripts/update-copyrights. | ||
|
Joseph Myers
|
423c2b9d08 |
Add fromfp functions.
TS 18661-1 defines fromfp functions (fromfp, fromfpx, ufromfp, ufromfpx, and float and long double variants) to convert from floating-point to an integer type with any signedness and any given width up to that of intmax_t, in any of the five IEEE rounding modes (the usual four for binary floating point, plus rounding to nearest with ties rounding away from zero), with control of whether in-range non-integer values should result in the "inexact" exception being raised. This patch implements these functions for glibc. These implementations are (apart from raising exceptions) pure integer implementations; it's entirely possible optimized versions could be devised for some architectures. A common math/fromfp.h header provides various common helper code that can readily be shared between the implementations for different types. For each type, the bulk of the implementation is also shared between the four functions, with wrappers that define UNSIGNED and INEXACT macros appropriately before including the main implementation. As the functions return intmax_t and uintmax_t without math.h being allowed to expose those typedef names, they are declared using __intmax_t and __uintmax_t as obtained from <bits/types.h>. The FP_INT_* rounding direction macros are defined as ascending integers in the order the names are listed in the TS; I see no significant value in allowing architectures to vary the values of them. The libm-test machinery is duly adapted to handle unsigned int arguments, and intmax_t and uintmax_t results. Because each test input is generally tested for four functions, five rounding modes and several different widths, the libm-test.inc additions are very large. Thus, the diffs in the body of this message exclude the libm-test.inc changes, with the full patch being attached gzipped. The bulk of the new tests were generated (expanded from a test input plus rounding results and information about where it lies in the relevant interval between integers, to libm-test tests for all relevant combinations of function, rounding direction and width) by a script that's included in the patch as math/gen-fromfp-tests.py (input data math/gen-fromfp-tests-inputs); as an ad hoc script that's not really expected to be rerun, it's not very polished, but it's at least plausibly useful for adding any further tests for these functions in future. I may split the libm-test tests up by function in future (so both libm-test.inc and auto-libm-test-out are split into separate files, and the tests for each function are also built and run separately), but not for 2.25. For no obvious reason, adding tgmath tests for the new functions resulted in -Wuninitialized errors from test-tgmath.c about the variable i being used uninitialized. Those errors were correct - the variable is read by the frexp version in test-tgmath.c (where real frexp would write through that pointer instead of reading it) - but I don't know why this patch would result in the pre-existing issue being newly detected. The patch initializes the variable to avoid those errors. With these changes, glibc 2.25 should have all the library features from TS 18661-1 other than the functions that round result to narrower type (and constant rounding directions, but I'm considering those mainly a compiler feature not a library one). Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfp): New declaration. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfpx): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfp): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfpx): Likewise. * math/tgmath.h (__TGMATH_TERNARY_FIRST_REAL_RET_ONLY): New macro. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfp): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfp): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfpx): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfpx): Likewise. * math/math.h: Include <bits/types.h>. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_INT_UPWARD): New enum constant and macro. (FP_INT_DOWNWARD): Likewise. (FP_INT_TOWARDZERO): Likewise. (FP_INT_TONEARESTFROMZERO): Likewise. (FP_INT_TONEAREST): Likewise. * math/Versions (fromfp): New libm symbol at version GLIBC_2.25. (fromfpf): Likewise. (fromfpl): Likewise. (ufromfp): Likewise. (ufromfpf): Likewise. (ufromfpl): Likewise. (fromfpx): Likewise. (fromfpxf): Likewise. (fromfpxl): Likewise. (ufromfpx): Likewise. (ufromfpxf): Likewise. (ufromfpxl): Likewise. * math/Makefile (libm-calls): Add s_fromfpF, s_ufromfpF, s_fromfpxF and s_ufromfpxF. * math/gen-fromfp-tests.py: New file. * math/gen-fromfp-tests-inputs: Likewise. * math/libm-test.inc: Include <stdint.h> (check_intmax_t): New function. (check_uintmax_t): Likewise. (struct test_fiu_M_data): New type. (struct test_fiu_U_data): Likewise. (RUN_TEST_fiu_M): New macro. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (fromfp_test_data): New array. (fromfp_test): New function. (fromfpx_test_data): New array. (fromfpx_test): New function. (ufromfp_test_data): New array. (ufromfp_test): New function. (ufromfpx_test_data): New array. (ufromfpx_test): New function. (main): Call fromfp_test, fromfpx_test, ufromfp_test and ufromfpx_test. * math/gen-libm-test.pl (parse_args): Handle u, M and U descriptor characters. * math/test-tgmath-ret.c: Include <stdint.h>. (rm): New variable. (width): Likewise. (CHECK_RET_CONST_TYPE): Take extra arguments and pass them to called function. (CHECK_RET_CONST_FLOAT): Take extra arguments and pass them to CHECK_RET_CONST_TYPE. (CHECK_RET_CONST_DOUBLE): Likewise. (CHECK_RET_CONST_LDOUBLE): Likewise. (CHECK_RET_CONST): Take extra arguments and pass them to calls macros. (fromfp): New CHECK_RET_CONST call. (ufromfp): Likewise. (fromfpx): Likewise. (ufromfpx): Likewise. (do_test): Call check_return_fromfp, check_return_ufromfp, check_return_fromfpx and check_return_ufromfpx. * math/test-tgmath.c: Include <stdint.h> (NCALLS): Increase to 138. (F(compile_test)): Initialize i. Call fromfp functions. (F(fromfp)): New function. (F(fromfpx)): Likewise. (F(ufromfp)): Likewise. (F(ufromfpx)): Likewise. * manual/arith.texi (Rounding Functions): Document FP_INT_UPWARD, FP_INT_DOWNWARD, FP_INT_TOWARDZERO, FP_INT_TONEARESTFROMZERO, FP_INT_TONEAREST, fromfp, fromfpf, fromfpl, ufromfp, ufromfpf, ufromfpl, fromfpx, fromfpxf, fromfpxl, ufromfpx, ufromfpxf and ufromfpxl. * manual/libm-err-tab.pl (@all_functions): Add fromfp, fromfpx, ufromfp and ufromfpx. * math/fromfp.h: New file. * sysdeps/ieee754/dbl-64/s_fromfp.c: Likewise. * sysdeps/ieee754/dbl-64/s_fromfp_main.c: Likewise. * sysdeps/ieee754/dbl-64/s_fromfpx.c: Likewise. * sysdeps/ieee754/dbl-64/s_ufromfp.c: Likewise. * sysdeps/ieee754/dbl-64/s_ufromfpx.c: Likewise. * sysdeps/ieee754/flt-32/s_fromfpf.c: Likewise. * sysdeps/ieee754/flt-32/s_fromfpf_main.c: Likewise. * sysdeps/ieee754/flt-32/s_fromfpxf.c: Likewise. * sysdeps/ieee754/flt-32/s_ufromfpf.c: Likewise. * sysdeps/ieee754/flt-32/s_ufromfpxf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fromfpl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fromfpl_main.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_ufromfpl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_ufromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fromfpl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fromfpl_main.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_ufromfpl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_ufromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fromfpl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fromfpl_main.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_ufromfpl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_ufromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fromfp, ufromfp, fromfpx and ufromfpx. (CFLAGS-nldbl-fromfp.c): New variable. (CFLAGS-nldbl-fromfpx.c): Likewise. (CFLAGS-nldbl-ufromfp.c): Likewise. (CFLAGS-nldbl-ufromfpx.c): Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-compat.h: Include <stdint.h>. * sysdeps/ieee754/ldbl-opt/nldbl-fromfp.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-fromfpx.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-ufromfp.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-ufromfpx.c: Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
|
Joseph Myers
|
41c67149b9 |
Add roundeven, roundevenf, roundevenl.
TS 18661-1 defines roundeven functions that round a floating-point number to the nearest integer, in that floating-point type, with ties rounding to even (whereas the round functions round ties away from zero). As with other such functions, they raise no exceptions apart from "invalid" for signaling NaNs. There was a previous user request for this functionality in glibc in <https://sourceware.org/ml/libc-help/2015-02/msg00005.html>. This patch implements these functions for glibc. The implementations use integer bit-manipulation (or roundeven on the high and low parts, in the IBM long double case). It's possible that there may be faster approaches on some architectures (in particular, on AArch64 the frintn instruction should do exactly what's required); I'll leave it to architecture maintainers or others interested to implement such architecture-specific versions if desired. (Where architectures have instructions to round to nearest integer in the current rounding mode, implementations saving and restoring the rounding mode - and dealing with exceptions if those instructions generate "inexact" - are also possible, though their performance depends on the cost of manipulating exceptions / rounding mode state.) Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (roundeven): New declaration. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (roundeven): New macro. * math/Versions (roundeven): New libm symbol at version GLIBC_2.25. (roundevenf): Likewise. (roundevenl): Likewise. * math/Makefile (libm-calls): Add s_roundevenF. * math/libm-test.inc (roundeven_test_data): New array. (roundeven_test): New function. (main): Call roundeven_test. * math/test-tgmath.c (NCALLS): Increase to 134. (F(compile_test)): Call roundeven. (F(roundeven)): New function. * manual/arith.texi (Rounding Functions): Document roundeven, roundevenf and roundevenl. * manual/libm-err-tab.pl (@all_functions): Add roundeven. * include/math.h (roundeven): Use libm_hidden_proto. * sysdeps/ieee754/dbl-64/s_roundeven.c: New file. * sysdeps/ieee754/dbl-64/wordsize-64/s_roundeven.c: Likewise. * sysdeps/ieee754/flt-32/s_roundevenf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_roundevenl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_roundevenl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_roundevenl.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add roundeven. (CFLAGS-nldbl-roundeven.c): New variable. * sysdeps/ieee754/ldbl-opt/nldbl-roundeven.c: New file. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
|
Joseph Myers
|
58307649fb |
Fix hypot sNaN handling (bug 20940).
TS 18661-1 generally defines libm functions taking sNaN arguments to return qNaN and raise "invalid", even for the cases where a corresponding qNaN argument would not result in a qNaN return. This includes hypot with one argument being an infinity and the other being an sNaN. This patch duly fixes hypot implementatations in glibc (generic and powerpc) to ensure qNaN, computed by arithmetic on the arguments, is returned in that case. Various implementations do their checks for infinities and NaNs inline by manipulating the representations of the arguments. For simplicity, this patch just uses issignaling to check for sNaN arguments. This could be inlined like the existing code (with due care about reversed quiet NaN conventions, for implementations where that is relevant), but given that all these checks are in cases where it's already known at least one argument is not finite, which should be the uncommon case, that doesn't seem worthwhile unless performance issues are observed in practice. Tested for x86_64, x86, mips64 and powerpc. [BZ #20940] * sysdeps/ieee754/dbl-64/e_hypot.c (__ieee754_hypot): Do not return Inf for arguments Inf and sNaN. * sysdeps/ieee754/flt-32/e_hypotf.c (__ieee754_hypotf): Likewise. * sysdeps/ieee754/ldbl-128/e_hypotl.c (__ieee754_hypotl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_hypotl.c (__ieee754_hypotl): Likewise. * sysdeps/ieee754/ldbl-96/e_hypotl.c (__ieee754_hypotl): Likewise. * sysdeps/powerpc/fpu/e_hypot.c (TEST_INF_NAN): Do not return Inf for arguments Inf and sNaN. When returning a NaN, compute it by arithmetic on the arguments. * sysdeps/powerpc/fpu/e_hypotf.c (TEST_INF_NAN): Likewise. * math/libm-test.inc (pow_test_data): Add tests of sNaN arguments. |
||
|
Joseph Myers
|
90ab295a9e |
Fix sysdeps/ieee754 pow handling of sNaN arguments (bug 20916).
Various pow function implementations mishandle sNaN arguments in various ways. This includes returning sNaN instead of qNaN for sNaN arguments. For arguments (1, sNaN) and (sNaN, 0), TS 18661-1 semantics are also that the result should be qNaN, whereas with a qNaN argument there the result should be 1, but for the dbl-64 implementation of pow there are issues with sNaN arguments beyond not implementing the TS 18661-1 semantics in those special cases. This patch makes the implementations in sysdeps/ieee754 follow the TS 18661-1 semantics consistently. Because x86 / x86_64 implementations still need fixing, testcases are not included with this patch; they will be included with the fix for the x86 / x86_64 versions. Tested for x86_64, x86, mips64 and powerpc (with such testcases, which pass in the mips64 and powerpc cases). [BZ #20916] * sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Do not return 1 for arguments (sNaN, 0) or (1, sNaN). Do arithmetic on NaN arguments to compute result. * sysdeps/ieee754/flt-32/e_powf.c (__ieee754_powf): Do not return 1 for arguments (sNaN, 0) or (1, sNaN). * sysdeps/ieee754/ldbl-128/e_powl.c (__ieee754_powl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_powl.c (__ieee754_powl): Likewise. |
||
|
Joseph Myers
|
72d839a42f |
Fix pow (qNaN, 0) result with -lieee (bug 20919), remove dead parts of wrappers.
The dbl-64 implementation of __ieee754_pow returns a NaN for pow (qNaN, 0) when it should return 1. Normally this is covered up by the wrappers ending up calling __kernel_standard which fixes up the result for this case, but for -lieee the wrappers are bypassed and the bad result gets through as a return value. Now, the wrappers fixing this are dealing with variant error handling that wants a result of NaN for pow (qNaN, 0), and only ever call __kernel_standard for this case if NaN resulted from __ieee754_pow. This leads to a question of whether the dbl-64 code might be deliberately returning NaN in order to use those code paths. However, I can find no sign that this is deliberate. If it were deliberate one would expect other implementations to do the same, and would expect the return of NaN to be very old, but it appears it came in by accident when the present e_pow.c implementation replaced an fdlibm implementation in 2001. So it appears to be unintended that this path through the pow wrapper could be used at all. So this patch fixes the implementation to return 1 in this case as expected. This is consistent with all the other implementations. The relevant path through the wrappers is now unreachable, so is removed (which is the main motivation of this patch: to avoid that path becoming accidentally reachable when implementing TS 18661-1 semantics that pow (sNaN, 0) should return qNaN with "invalid" raised). Another path that would require __ieee754_pow (0, 0) to return 0 is also unreachable (as all implementations return 1, in accordance with C99 semantics), so is removed as well. Note: we don't have anything set up to test -lieee, which in any case is obsolescent (at some point we should remove the ability for new programs to access _LIB_VERSION or define matherr and have it called by glibc). So testing will be implicit through sNaN tests added when making sNaN inputs work correctly for pow functions. Tested for x86_64 and x86. [BZ #20919] * sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Do not return NaN first argument when raised to power 0. * math/w_pow.c (__pow): Do not check for NaN or zero results from raising to power zero. * math/w_powf.c (__powf): Likewise. * math/w_powl.c (__powl): Likewise. * sysdeps/ieee754/k_standard.c (__kernel_standard): Do not handle pow (0, 0) or pow (NaN, 0). |
||
|
Joseph Myers
|
457663a7cd |
Add setpayloadsig, setpayloadsigf, setpayloadsigl.
TS 18661-1 defines functions for manipulating the payloads of NaNs. This patch implements the setpayloadsig functions for glibc; these are like the setpayload functions, but produce a signaling NaN instead of a quiet NaN. The substance of the implementation was included with the setpayload implementation, so the new files here just need to wrap the main files with different defines to build the new functions. Because the functions store a signaling NaN via a pointer and the libm-test macros choose a suitable initial value for the variable in such a case by comparing with the expected value, the relevant macro needs to clear exceptions after FE_INVALID may have been raised by that comparison. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (setpayloadsig): New declaration. * math/Versions (setpayloadsig): New libm symbol at version GLIBC_2.25. (setpayloadsigf): Likewise. (setpayloadsigl): Likewise. * math/Makefile (libm-calls): Add s_setpayloadsigF. * math/libm-test.inc (RUN_TEST_Ff_b1): Call feclearexcept (FE_ALL_EXCEPT) after initializing EXTRA_VAR. (setpayloadsig_test_data): New array. (setpayloadsig_test): New function. (main): Call setpayloadsig_test. * manual/arith.texi (FP Bit Twiddling): Document setpayloadsig, setpayloadsigf and setpayloadsigl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_setpayloadsig.c: New file. * sysdeps/ieee754/flt-32/s_setpayloadsigf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_setpayloadsigl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_setpayloadsigl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_setpayloadsigl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-setpayloadsig.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add setpayloadsig. (CFLAGS-nldbl-setpayloadsig.c): New variable. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
|
Joseph Myers
|
eb3c12c784 |
Add setpayload, setpayloadf, setpayloadl.
TS 18661-1 defines functions for manipulating the payloads of NaNs. This patch implements the setpayload functions for glibc; these set a number (pointed to by a function argument) to a quiet NaN with the given payload, or to +0 if the given payload is not valid. The implementations are structured to allow the substance of the implementation to be shared with the setpayloadsig functions when those are added. The semantics in the TS are not entirely clear in the case where the payload passed to the function is zero (see discussion on the WG14 reflector last month). This patch implements what seems the most sensible interpretation, that -0 is never valid to give as the payload, but +0 is valid in the case where the kind of NaN being generated has its high mantissa bit set so payload 0 is actually possible in such a NaN. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (setpayload): New declaration. * math/Versions (setpayload): New libm symbol at version GLIBC_2.25. (setpayloadf): Likewise. (setpayloadl): Likewise. * math/Makefile (libm-calls): Add s_setpayloadF. * math/libm-test.inc (struct test_Ffp_b1_data): Rename to struct test_Ff_b1_data. (RUN_TEST_Ff_b1): New macro. (RUN_TEST_LOOP_Ff_b1): Likewise. (canonicalize_test_data): Update type. (setpayload_test_data): New array. (setpayload_test): New function. (main): Call setpayload_test. * manual/arith.texi (FP Bit Twiddling): Document setpayload, setpayloadf and setpayloadl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_setpayload.c: New file. * sysdeps/ieee754/dbl-64/s_setpayload_main.c: Likewise. * sysdeps/ieee754/dbl-64/wordsize-64/s_setpayload_main.c: Likewise. * sysdeps/ieee754/flt-32/s_setpayloadf.c: Likewise. * sysdeps/ieee754/flt-32/s_setpayloadf_main.c: Likewise. * sysdeps/ieee754/ldbl-128/s_setpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_setpayloadl_main.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_setpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_setpayloadl_main.c: Likewise. * sysdeps/ieee754/ldbl-96/s_setpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_setpayloadl_main.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-setpayload.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add setpayload. (CFLAGS-nldbl-setpayload.c): New variable. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
|
Joseph Myers
|
f8e8b8ed9f |
Add getpayload, getpayloadf, getpayloadl.
TS 18661-1 defines functions for manipulating the payloads of NaNs. This patch implements the getpayload functions for glibc; these extract the NaN payload (from an argument passed as a pointer, for which corresponding libm-test support is added) and return it in the same floating-point type. The return value of these functions is unspecified for non-NaN arguments; the patch does the simplest thing to implement, which is that the functions do not check whether the argument is a NaN and just treat the relevant bits of the representation as a payload regardless. A conversion from integer to floating-point is used to produce the required return value, except in the ldbl-128 case; as 128-bit integers are not supported for all configurations using ldbl-128, the code constructs the required floating-point representation of the return value directly instead. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (getpayload): New declaration. * math/Versions (getpayload): New libm symbol at version GLIBC_2.25. (getpayloadf): Likewise. (getpayloadl): Likewise. * math/Makefile (libm-calls): Add s_getpayloadF. * math/libm-test.inc: Include <nan-high-order-bit.h>. (struct test_f_f_data): Add comment. (RUN_TEST_fp_f): New macro. (RUN_TEST_LOOP_fp_f): Likewise. (getpayload_test_data): New array. (getpayload_test): New function. (main): Call getpayload_test. * math/gen-libm-test.pl (parse_args): Handle 'p' in argument descriptor. * manual/arith.texi (FP Bit Twiddling): Document getpayload, getpayloadf and getpayloadl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_getpayload.c: New file. * sysdeps/ieee754/dbl-64/wordsize-64/s_getpayload.c: Likewise. * sysdeps/ieee754/flt-32/s_getpayloadf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_getpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_getpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_getpayloadl.c: Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
|
Joseph Myers
|
6f322a8947 |
Define HIGH_ORDER_BIT_IS_SET_FOR_SNAN to 0 or 1.
This patch moves the HIGH_ORDER_BIT_IS_SET_FOR_SNAN macro from being defined or undefined to the preferred convention of always being defined, to either 0 or 1, so allowing typo-proof tests with #if. The macro is moved from math_private.h to a new header nan-high-order-bit.h to make it easy for all architectures to define, either through the sysdeps/generic version of the header or through providing their own version of the header, without needing #ifndef in the generic math_private.h to give a default definition. The move also allows the macro to be used without needing math_private.h to be included; the immediate motivation of this patch is to allow tests to access this information (to know what kinds of NaNs 0 is a valid payload for) without needing to include math_private.h. Existing C level rather than preprocessor conditionals at all, but this patch does not make such a change). Tested for x86_64 and x86 (testsuite); also verified for x86_64, x86, mips64 and powerpc that installed stripped shared libraries are unchanged by the patch. * sysdeps/generic/nan-high-order-bit.h: New file. * sysdeps/hppa/nan-high-order-bit.h: Likewise. * sysdeps/mips/nan-high-order-bit.h: Likewise. * sysdeps/hppa/math_private.h: Remove file. * sysdeps/mips/math_private.h (HIGH_ORDER_BIT_IS_SET_FOR_SNAN): Do not define here. * sysdeps/ieee754/dbl-64/s_issignaling.c: Include <nan-high-order-bit.h>. [HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef. * sysdeps/ieee754/dbl-64/s_totalorder.c: Include <nan-high-order-bit.h>. [HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef. * sysdeps/ieee754/dbl-64/s_totalordermag.c: Include <nan-high-order-bit.h>. [HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef. * sysdeps/ieee754/dbl-64/wordsize-64/s_issignaling.c: Include <nan-high-order-bit.h>. [HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Include <nan-high-order-bit.h>. [HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Include <nan-high-order-bit.h>. [HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef. * sysdeps/ieee754/flt-32/s_issignalingf.c: Include <nan-high-order-bit.h>. [HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef. * sysdeps/ieee754/flt-32/s_totalorderf.c: Include <nan-high-order-bit.h>. [HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef. * sysdeps/ieee754/flt-32/s_totalordermagf.c: Include <nan-high-order-bit.h>. [HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef. * sysdeps/ieee754/ldbl-128/s_issignalingl.c: Include <nan-high-order-bit.h>. [HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef. * sysdeps/ieee754/ldbl-128/s_totalorderl.c: Include <nan-high-order-bit.h>. [HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef. * sysdeps/ieee754/ldbl-128/s_totalordermagl.c: Include <nan-high-order-bit.h>. [HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef. * sysdeps/ieee754/ldbl-128ibm/s_issignalingl.c: Include <nan-high-order-bit.h>. [HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef. * sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Include <nan-high-order-bit.h>. [HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef. * sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c: Include <nan-high-order-bit.h>. [HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef. * sysdeps/ieee754/ldbl-96/s_issignalingl.c: Include <nan-high-order-bit.h>. [HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef. * sysdeps/ieee754/ldbl-96/s_totalorderl.c: Include <nan-high-order-bit.h>. [HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef. * sysdeps/ieee754/ldbl-96/s_totalordermagl.c: Include <nan-high-order-bit.h>. [HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef. |
||
|
Joseph Myers
|
cc6a8d7457 |
Add totalordermag, totalordermagf, totalordermagl.
In addition to the totalorder functions, TS 18661-1 defines totalordermag functions, which do the same comparison but on the absolute values of the arguments. This patch implements these functions for glibc, including the type-generic macro in <tgmath.h>. In general the implementations are similar to but simpler than those for the totalorder functions. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag): New declaration. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag): New macro. * math/Versions (totalordermag): New libm symbol at version GLIBC_2.25. (totalordermagf): Likewise. (totalordermagl): Likewise. * math/Makefile (libm-calls): Add s_totalordermagF. * math/libm-test.inc (totalordermag_test_data): New array. (totalordermag_test): New function. (main): Call totalordermag_test. * math/test-tgmath.c (NCALLS): Increase to 125. (F(compile_test)): Call totalordermag. (F(totalordermag)): New function. * manual/arith.texi (FP Comparison Functions): Document totalordermag, totalordermagf and totalordermagl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_totalordermag.c: New file. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Likewise. * sysdeps/ieee754/flt-32/s_totalordermagf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_totalordermagl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_totalordermagl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-totalordermag.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add totalordermag. (CFLAGS-nldbl-totalordermag.c): New variable. * sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c (do_test): Also test totalordermagl. * sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c (do_test): Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
steve ellcey-CA Eng-Software
|
e223d1fe72 |
Fix warnings from latest GCC.
* sysdeps/ieee754/dbl-64/e_pow.c (checkint) Make conditions explicitly boolean. |
||
|
Joseph Myers
|
5e9d98a3d9 |
Add totalorder, totalorderf, totalorderl.
TS 18661-1 defines totalorder functions implementing the totalOrder comparison operation from IEEE 754-2008. This patch implements these functions for glibc, including the type-generic macro in <tgmath.h>. (The totalordermag functions will be added in a separate patch.) The description of the totalOrder operation is complicated. However, for IEEE interchange binary formats and the preferred quiet NaN convention, what that complicated description means is that you interpret the representation as a sign-magnitude integer (with -0 coming before +0) and do a <= comparison on that interpretation. For finite values and infinities the ordering of the sign-magnitude integers is just the same as the ordering of floating-point values, so this extends that to all representations. (Different representations of the same floating-point value - which includes same quantum in the decimal case - must still be considered equal by this operation, but that issue doesn't arise for IEEE interchange binary formats.) So the complications are: * When MIPS quiet NaN conventions are in use, the representation of NaNs needs adjusting before making such an integer comparison. This patch does this adjustment only when both arguments are NaNs, as there's no need for it if only one is a NaN, and as long as both are NaNs you can just flip the relevant bits without any problems from this turning a NaN into an infinity. * For the m68k version of ldbl-96, where the high mantissa bit is "don't care" for infinities and NaNs, representations where it differs must compare the same. Note: although the testcase for this compiles, I have not actually tested on m68k. * For ldbl-128ibm, the low part must be ignored when the high part is NaN, and low parts of +0 and -0 must be considered the same whatever the high part. The new tests in libm-test.inc are the first tests there specifying particular payloads for input NaNs. Separate tests are also added for the ldbl-96 and ldbl-128ibm special cases where there are different representations of the same value that must compare equal (which can't be covered in libm-test.inc as that only specifies values, not representations). Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): New declaration. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): New macro. * math/Versions (totalorder): New libm symbol at version GLIBC_2.25. (totalorderf): Likewise. (totalorderl): Likewise. * math/Makefile (libm-calls): Add s_totalorderF. * math/gen-libm-test.pl (parse_args): Escape quotes in test name string. * math/libm-test.inc (PAYLOAD_DIG): New macro. (qnan_value_pl): Likewise. (snan_value_pl): Likewise. (qnan_value): Define using qnan_value_pl. (snan_value): Define using snan_value_pl. (struct test_ff_i_data): Add comment about which tests use this structure. (RUN_TEST_ff_b): New macro. (RUN_TEST_LOOP_ff_b): Likewise. (totalorder_test_data): New array. (totalorder_test): New function. (main): Call totalorder_test. * math/test-tgmath.c (NCALLS): Increase to 122. (F(compile_test)): Call totalorder. (F(totalorder)): New function. * manual/arith.texi (FP Comparison Functions): Document totalorder, totalorderf and totalorderl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_totalorder.c: New file. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Likewise. * sysdeps/ieee754/flt-32/s_totalorderf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_totalorderl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_totalorderl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add totalorder. (CFLAGS-nldbl-totalorder.c): New variable. * sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c: New file. * sysdeps/ieee754/ldbl-128ibm/Makefile [$(subdir) = math] (tests): Add test-totalorderl-ldbl-128ibm. * sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c: New file. * sysdeps/ieee754/ldbl-96/Makefile [$(subdir) = math] (tests): Add test-totalorderl-ldbl-96. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
Siddhesh Poyarekar
|
36ee03e6a8 |
Update comments for some functions in s_sin.c
Update comments for some functions to bring them in sync with what the functions are actually doing. |
||
|
Siddhesh Poyarekar
|
9cb069308c |
Adjust calls to do_sincos_1 and do_sincos_2 in s_sincos.c
Adjust calls to do_sincos_1 and do_sincos_2 to pass a boolean shift_quadrant instead of the numeric 0 and 1. This does not affect codegen. |
||
|
Siddhesh Poyarekar
|
ead1ef37d2 |
Make quadrant shift a boolean in reduce_and_compute in s_sin.c
Like the previous change, make the quadrant shift a boolean to make it clearer that we will do at most a single rotation of the quadrants to compute the cosine from the sine function. This does not affect codegen. |
||
|
Siddhesh Poyarekar
|
ba4e688461 |
Check n instead of k1 to decide on sign of sin/cos result
For k1 in 1 and 3, n can only have values of 0 and 2, so checking k1 &
2 is equivalent to checking n & 2. We prefer the latter so that we
don't use k1 for anything other than selecting the quadrant in
do_sincos_1, thus dropping it completely.
The previous logic was:
"Compute sine for the value and based on the new rotated quadrant
(k1) negate the value if we're in the fourth quadrant."
With this change, the logic now is:
"Compute sine for the value and negate it if we were either (1) in
the fourth quadrant or (2) we actually wanted the cosine and were
in the third quadrant."
* sysdeps/ieee754/dbl-64/s_sin.c (do_sincos_1): Check N
instead of K1.
|
||
|
Siddhesh Poyarekar
|
b8b7e5e644 |
Make the quadrant shift K a bool in do_sincos_* functions
The do_sincos_* functions are helpers to compute sin/cos, where they get cosine by computing sine for the next quadrant. This is decided with the value of K passed to it, which is the amount by which to shift the quadrant. Since we will only need the shift to be 0 or 1, we make K a bool to make that explicit. * sysdeps/ieee754/dbl-64/s_sin.c (do_sincos_1): Rename K to SHIFT_QUADRANT and make it bool. (do_sincos_2): Likewise. (sloww): Likewise. (sloww1): Likewise. (__sin): Adjust calls to do_sincos_1 and do_sincos_2. (__cos): Likewise. |