TS 18661-1 adds an issubnormal classification macro to <math.h>. This
patch implements it for glibc. There are no new underlying functions
in libm because the implementation uses fpclassify; any optimizations
for this macro should be done through adding __builtin_subnormal in
GCC and using it in the header for suitable GCC versions, not through
adding other optimized inline or out-of-line versions to glibc.
The intended structure of the NEWS entry for <math.h> features from TS
18661-1 is like:
* New <math.h> features are added from TS 18661-1:2014:
- Nearest integer functions: roundeven, roundevenf, roundevenl.
- Comparison macros: iseqsig.
- Classification macros: iscanonical, issubnormal, iszero.
(that is, following the grouping of interfaces in TS 18661-1:2014,
with any group where any interfaces are new in glibc 2.25 being listed
like that).
Tested for x86_64 and x86.
* math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (issubnormal): New
macro.
* math/libm-test.inc (issubnormal_test_data): New array.
(issubnormal_test): New function.
* manual/arith.texi (Floating Point Classes): Document
issubnormal.
* manual/libm-err-tab.pl: Update comment on interfaces without
ulps tabulated.
TS 18661-1 defines macros for the width of integer types, intended for
use with the fromfp functions to convert from floating-point types to
integer types of any width, in any rounding mode and with control over
whether "inexact" is raised. Such macros are, of course, more
generally useful than just with those functions.
Those macros are added to <limits.h> and <stdint.h>. Having
previously added the <limits.h> macros, this patch adds the <stdint.h>
ones. I've also added these macros to GCC's headers for GCC 7, but
for glibc systems, the definitions in GCC's <stdint.h> will only be
used with -ffreestanding.
Tested for x86_64 and x86.
* sysdeps/generic/stdint.h: Define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
<bits/libc-header-start.h> instead of including <features.h>.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT8_WIDTH): New macro.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT8_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT16_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT16_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT32_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT32_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT64_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT64_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_LEAST8_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_LEAST8_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_LEAST16_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_LEAST16_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_LEAST32_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_LEAST32_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_LEAST64_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_LEAST64_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_FAST8_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_FAST8_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_FAST16_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_FAST16_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_FAST32_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_FAST32_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_FAST64_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_FAST64_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (INTPTR_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINTPTR_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (INTMAX_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINTMAX_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (PTRDIFF_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (SIG_ATOMIC_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (SIZE_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (WCHAR_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (WINT_WIDTH): Likewise.
* manual/arith.texi (Integers): Document these macros for types
specified by width properties.
* manual/lang.texi (Width of Type): Document these macros for
other standard typedefs.
* stdlib/tst-width-stdint.c: New file.
* stdlib/Makefile (tests): Add tst-width-stdint.
The macros are no longer up-to-date, and the classification is not
useful. In this particular case, removal without prior deprecation
seems the right approach.
This patch correctly block and unblocks all signals when executing
Linux posix_spawn by using the __libc_signal_{un}block_all functions
instead of default sigprocmask. The latter might remove both
SIGCANCEL and SIGSETXID from the blocked signal list.
Checked on x86_64, i686, powerpc64le, and aarch64.
* sysdeps/unix/sysv/linux/spawni.c (__spawnix): Correctly block and unblock
all signals when executing the clone vfork child.
(SIGALL_SET): Remove macro.
This patch correctly enable and disable asynchronous cancellation on
Linux posix_spawn. Current code invert the logic by enabling and
disabling instead. It also adds a new test to check if posix_spawn
is not a cancellation entrypoint.
Checked on x86_64, i686, powerpc64le, and aarch64.
* nptl/Makefile (tests): Add tst-exec5.
* nptl/tst-exec5.c: New file.
* sysdeps/unix/sysv/linux/spawni.c (__spawni): Correctly enable and disable
asynchronous cancellation.
This requires adding a macro to synthesize the call
to __strto*_nan. Since this is likely to be the only
usage ever for strto* functions in generated libm
calls, a dedicated macro is defined for it.
Use the GCC builtin instead. With the exception of the
files built from a template, they are unused. This
is preparation for making the s_nanF objects generated.
This one is a little more tricky since it is built both for
libm and libc, and exports multiple aliases.
To simplify aliasing, a new macro is introduced which handles
aliasing to two symbols. By default, it just applies
declare_mgen_alias to both target symbols.
Likewise, the makefile is tweaked a little to generate
templates for shared files too, and a new rule is added
to build m_*.c objects from the objpfx directory.
Verified there are no symbol or code changes using a script
to diff the *_ldexp* object files on s390x, aarch64, arm,
x86_64, and ppc64.
This was used by --enable-omitfp, and the bulk of it was removed in this
commit:
commit bdeba1354b
Author: Ulrich Drepper <drepper@gmail.com>
Date: Sat Jan 7 11:29:31 2012 -0500
Remove --enable-omitfp support
rtld only needs shared objects, so the other patterns are pointless and
significantly increase the work make has to perform while identifying
which pattern rule to apply.
TS 18661-1 defines macros for the width of integer types, intended for
use with the fromfp functions to convert from floating-point types to
integer types of any width, in any rounding mode and with control over
whether "inexact" is raised. Such macros are, of course, more
generally useful than just with those functions.
Those macros are added to <limits.h> and <stdint.h>. This patch adds
the <limits.h> macros to glibc's header, with the <stdint.h> ones
intended to be added in a separate patch (which would add to the NEWS
entry created by this patch). I've also added these macros to GCC's
headers for GCC 7, but definitions in glibc's <limits.h> are still
useful for older GCC, for non-GNU compilers and for when it's
_GNU_SOURCE rather than __STDC_WANT_IEC_60559_BFP_EXT__ that implies
the macros should be defined since the GCC header only considers
__STDC_WANT_IEC_60559_BFP_EXT__ (and for glibc systems, the
definitions in GCC's <stdint.h> will only be used with
-ffreestanding).
Tested for x86_64 and x86.
* include/limits.h: Define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
<bits/libc-header-start.h> instead of including <features.h>.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (CHAR_WIDTH): New macro.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (SCHAR_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (UCHAR_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (SHRT_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (USHRT_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (LONG_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (ULONG_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (LLONG_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (ULLONG_WIDTH): Likewise.
* manual/lang.texi (Width of Type): Document these macros.
* stdlib/tst-width.c: New file.
* stdlib/Makefile (tests): Add tst-width.
Current sparc32 sem_init and default one only differ on sem.newsem.pad
initialization. This patch removes sparc32 and sparc32v9 sem_init arch
specific implementation and set sparc32 to use nptl default one.
The default implementation sets the required sem.newsem.pad to 0 (which
is ununsed in other architectures).
I checked on i686 and a sparc32v9 build.
* nptl/sem_init.c (sem_init): Init pad value to 0.
* sysdeps/sparc/sparc32/sem_init.c: Remove file.
* sysdeps/sparc/sparc32/sparcv9/sem_init.c: Likewise.
This patch changes shm_open to not act as a cancellation point.
Cancellation is disable at start and reenable in function exit.
It fixes BZ #18243.
Tested on x86_64 and i686.
[BZ #18243]
* rt/Makefile (test): Add tst-shm-cancel.
* rt/tst-shm-cancel.c: New file.
* sysdeps/posix/shm_open.c: Disable asynchronous cancellation.
This patch fixes both sem_wait and sem_timedwait cancellation point for
uncontended case. In this scenario only atomics are involved and thus
the futex cancellable call is not issue and a pending cancellation signal
is not handled.
The fix is straighforward by calling pthread_testcancel is both function
start. Although it would be simpler to call CANCELLATION_P directly, I
decided to add an internal pthread_testcancel alias and use it to export
less internal implementation on such function. A possible change on
how pthread_testcancel is internally implemented would lead to either
continue to force use CANCELLATION_P or to adjust its every use.
GLIBC testcase also does have tests for uncontended cases, test-cancel12
and test-cancel14.c, however both are flawed by adding another
cancellation point just after thread pthread_cleanup_pop:
47 static void *
48 tf (void *arg)
49 {
50 pthread_cleanup_push (cleanup, NULL);
51
52 int e = pthread_barrier_wait (&bar);
53 if (e != 0 && e != PTHREAD_BARRIER_SERIAL_THREAD)
54 {
55 puts ("tf: 1st barrier_wait failed");
56 exit (1);
57 }
58
59 /* This call should block and be cancelable. */
60 sem_wait (&sem);
61
62 pthread_cleanup_pop (0);
63
64 puts ("sem_wait returned");
65
66 return NULL;
67 }
So sem_{timed}wait does not act on cancellation, pthread_cleanup_pop executes
'cleanup' and then 'puts' acts on cancellation. Since pthread_cleanup_pop
removed the clean-up handler, it will ran only once and thus it won't accuse
an error to indicate sem_wait has not acted on the cancellation signal.
This patch also fixes this behavior by removing the cancellation point 'puts'.
It also adds some cleanup on all sem_{timed}wait cancel tests.
It partially fixes BZ #18243. Checked on x86_64.
[BZ #18243]
* nptl/pthreadP.h (__pthread_testcancel): Add prototype and hidden_proto.
* nptl/pthread_testcancel.c (pthread_cancel): Add internal aliais
definition.
* nptl/sem_timedwait.c (sem_timedwait): Add cancellation check for
uncontended case.
* nptl/sem_wait.c (__new_sem_wait): Likewise.
* nptl/tst-cancel12.c (cleanup): Remove wrong cancellation point.
(tf): Fix check for uncontended case.
(do_test): Likewise.
* nptl/tst-cancel13.c (cleanup): Remove wrong cancellation point.
(tf): Fix check for uncontended case.
(do_test): Likewise.
* nptl/tst-cancel14.c (cleanup): Remove wrong cancellation point.
(tf): Fix check for uncontended case.
(do_test): Likewise.
* nptl/tst-cancel15.c (cleanup): Remove wrong cancellation point.
(tf): Fix check for uncontended case.
(do_test): Likewise.
This patch removes the sparc32 sem_wait.c implementation since it is
identical to default nptl one. The sparcv9 is no longer required with
the removal.
Checked with a sparcv9 build.
* sysdeps/sparc/sparc32/sem_wait.c: Remove file.
* sysdeps/sparc/sparc32/sparcv9/sem_wait.c: Likewise.
This patch changes sem_open to not act as a cancellation point.
Cancellation is disable at start and reenable in function exit.
It fixes BZ #15765.
Tested on x86_64 and i686.
[BZ #15765]
* nptl/Makefile (tests): Add tst-sem16.
* nptl/tst-sem16.c: New file.
* nptl/sem_open.c (sem_open): Disable asynchronous cancellation.
Current sparc32 sem_open and default one only differ on:
1. Default one contains a 'futex_supports_pshared' check.
2. sem.newsem.pad is initialized to zero.
This patch removes sparc32 and sparc32v9 sem_open arch specific
implementation and instead set sparc32 to use nptl default one.
Using 1. is fine since it should always evaluate 0 for Linux
(an optimized away by the compiler). Adding 2. to default
implementation should be ok since 'pad' field is used mainly
on sparc32 code.
I checked on i686 and checked a sparc32v9 build.
* nptl/sem_open.c (sem_open): Init pad value to 0.
* sysdeps/sparc/sparc32/sem_open.c: Remove file.
* sysdeps/sparc/sparc32/sparcv9/sem_open.c: Likewise.
Nothing depends on the PTW macro anymore, so the mechanism to define
PTW for recompliations of libc routines is no longer needed. The
source files are still recompiled for the nptl directory, just without
the “ptw-” prefix.
(Reducing the number of pattern rules in sysd-rules is critical for
improving make performance.)
This runs the attached sed script against these files using
a regex which aggressively matches long double literals
when not obviously part of a comment.
Likewise, 5 digit or less integral constants are replaced
with integer constants, excepting the two cases of 0 used
in large tables, which are also the only integral values
of the form x.0*E0L encountered within these converted
files.
Likewise, -L(x) is transformed into L(-x).
Naturally, the script has a few minor hiccups which are
more clearly remedied via the attached fixup patch. Such
hiccups include, context-sensitive promotion to a real
type, and munging constants inside harder to detect
comment blocks.
This is a trivial change to add the static tests only to tests-static
and then adding all of tests-static to the tests target to make it
look consistent with some other Makefiles. This avoids having to
duplicate the test names across the two make targets.
* malloc/Makefile (tests): Remove individual static test names
and just add all of tests-static.
21ad055803 removed the function, but
missed the declaration in libc-start. Removed and verified that the
generated assembly is unchanged.
* csu/libc-start.c (__libc_csu_irel): Remove declaration.
When I added fetestexceptflag, I missed that e500 was another case
that needed its own version because saved exceptions were not directly
stored in a form that could be ANDed with exception bits (they were
stored with exceptions in SPE form, but the FE_* macros always use the
classic hard-float form). This patch adds an e500 version with the
required call to __fexcepts_from_spe to convert from one form to the
other.
Tested for e500.
* sysdeps/powerpc/powerpc32/e500/nofpu/fetestexceptflag.c: New
file.
This patch adds SPARC versions of fegetmode and fesetmode. Untested.
* sysdeps/sparc/fpu/fegetmode.c: New file.
* sysdeps/sparc/fpu/fesetmode.c: Likewise.
This patch adds SH versions of fegetmode and fesetmode. Untested.
* sysdeps/sh/sh4/fpu/fegetmode.c: New file.
* sysdeps/sh/sh4/fpu/fesetmode.c: Likewise.
This patch adds S/390 versions of fegetmode and fesetmode. Untested.
* sysdeps/s390/fpu/fegetmode.c: New file.
* sysdeps/s390/fpu/fesetmode.c: Likewise.
This patch adds M68K versions of fegetmode and fesetmode. Untested.
* sysdeps/m68k/fpu/fegetmode.c: New file.
* sysdeps/m69k/fpu/fesetmode.c: Likewise.
This patch adds IA64 versions of fegetmode and fesetmode. Untested.
* sysdeps/ia64/fpu/fegetmode.c: New file.
* sysdeps/ia64/fpu/fesetmode.c: Likewise.
This patch adds HPPA versions of fegetmode and fesetmode. Untested.
* sysdeps/hppa/fpu/fegetmode.c: New file.
* sysdeps/hppa/fpu/fesetmode.c: Likewise.
This patch adds Alpha versions of fegetmode and fesetmode. Untested.
* sysdeps/alpha/fpu/fegetmode.c: New file.
* sysdeps/alpha/fpu/fesetmode.c: Likewise.
