This patch fixes math/test-fenvinline.c to stop it failing in
no-exceptions configurations (where some exception macros are defined
but may not be supported at runtime). The relevant parts of the test
are disabled in that case; some parts can still run (and the rounding
mode tests are written in a way such that they work even if the
rounding modes aren't supported).
Tested for mips64 soft-float, and for x86_64 to make sure the tests
still run when the exceptions are supported.
* math/test-fenvinline.c (do_test): Disable tests of raised
exceptions if !EXCEPTION_TESTS (FLOAT).
Similar to BZ#19387, BZ#21014, and BZ#20971, both x86 sse2 strncat
optimized assembly implementations do not handle the size overflow
correctly.
The x86_64 one is in fact an issue with strcpy-sse2-unaligned, but
that is triggered also with strncat optimized implementation.
This patch uses a similar strategy used on 3daef2c8ee, where
saturared math is used for overflow case.
Checked on x86_64-linux-gnu and i686-linux-gnu. It fixes BZ #19390.
[BZ #19390]
* string/test-strncat.c (test_main): Add tests with SIZE_MAX as
maximum string size.
* sysdeps/i386/i686/multiarch/strcat-sse2.S (STRCAT): Avoid overflow
in pointer addition.
* sysdeps/x86_64/multiarch/strcpy-sse2-unaligned.S (STRCPY):
Likewise.
elf/Makefile passes arguments to tst-ldconfig-X.sh that are different
from what it expects, so resulting in the test failing in cross
testing. This patch corrects the arguments passed (the script itself
has correct logic for cross testing, it's just the Makefile that's
wrong).
Tested for powerpc (cross testing) and for x86_64 (native testing).
* elf/Makefile ($(objpfx)tst-ldconfig-X.out): Correct arguments
passed to tst-ldconfig-X.sh.
Mixing them up breaks the gdb pretty printer tests.
ChangeLog:
2017-01-02 Martin Galvan <martingalvan@sourceware.org>
* nptl/nptl-printers.py: Fix tabs/spaces mismatches.
The lseek consolidation broke lseek64 for MIPS n32, so resulting in
io/test-lfs failing with an incorrect return from ftello64. This
configuration uses the lseek syscall with a 64-bit return value; as
the C syscall macros return long, they cannot be used in this case and
so an assembly implementation is needed; accordingly, this patch adds
lseek64 back to syscalls.list for this configuration.
lseek was also broken, truncating the result without checking for
overflow. lseek however was already broken before the consolidation;
it aliased lseek64 so would return an out-of-range value, resulting in
architecturally undefined behavior in the caller if it tried to use a
non-sign-extended value with a 32-bit instruction. This patch adds a
custom lseek implementation in C for n32, which calls __lseek64 to get
the 64-bit value then checks for overflow.
Because the prior lseek breakage did not show in test results, and the
lseek64 breakage showed only indirectly through tests of ftello64,
test coverage was clearly inadequate. This patch extends
io/test-lfs.c to test the lseek64 return value (at a point where it
has already seeked over 2GB into a file), and then to test the lseek
return value (with the latter's expectations depending on whether
off_t is smaller than off64_t).
Tested for mips64 n32. Also tested test-lfs for x86_64 and x86, where
as expected it passes.
[BZ #21019]
* sysdeps/unix/sysv/linux/mips/mips64/n32/syscalls.list (lseek64):
New syscall entry.
* sysdeps/unix/sysv/linux/mips/mips64/n32/lseek.c: New file.
* io/test-lfs.c (do_test): Test offset returned from lseek64 and
lseek.
The 32-bit powerpc configurations in build-many-glibcs.py were failing
to cover the powerpc32 multiarch code at all, because that code is
only built for power4 and above configurations. This patch adds a
32-bit power4 configuration so that at least some of that multiarch
code gets build-tested. (This is preparation for reviewing the w_*
file renaming, which affects such powerpc32 multiarch files.)
* scripts/build-many-glibcs.py (Context.add_all_configs): Add
power4 glibc for powerpc-linux-gnu.
The command IPC_STAT of semctl expects an union semun in its fourth
argument instead of struct semid_ds *. This can cause failures on
powerpc32-linux-gnu.
Checked on x86_64-linux-gnu, i686-linux-gnu, and powerpc32-linux-gnu
(qemu system emulation).
The test math/test-nearbyint-except conditions some of its tests on an
EXCEPTION_TESTS call, not not all that need such a condition. This
patch fixes it to use such a conditional for all its tests and to
return 77 (UNSUPPORTED) if none of the floating-point types tested
support exceptions.
Tested for mips64 soft float (where the test previously failed and is
now UNSUPPORTED); also tested for x86_64 to make sure the test still
PASSes in exceptions-supported cases.
* math/test-nearbyint-except.c: Include <stdbool.h>.
(any_supported): New variable.
(TEST_FUNC): Return early if !EXCEPTION_TESTS (FLOAT). Otherwise
set any_supported.
(do_test): Return 77 if no floating-point type supported
exceptions.
Testing for MIPS soft float shows that the issue with NaN payload
preservation applies to soft float as well as hard float: the
sfp-machine.h emulates hardware non-preservation semantics, although
only for the case of two NaN arguments.
This patch duly changes the MIPS math-tests.h to expect such
non-preservation for soft float as well as hard float. The issue in
the NAN2008 case for which I posted
<https://gcc.gnu.org/ml/gcc-patches/2017-01/msg00034.html>, of sNaN
payloads being preserved but qNaN payloads not being preserved, is not
currently an issue for glibc tests because we don't have any tests
that check for qNaN payloads being preserved by arithmetic, so a
simple __mips_nan2008 conditional suffices without needing compiler
version checks in the __mips_nan2008 case.
Tested for mips64 soft float.
* sysdeps/mips/math-tests.h (SNAN_TESTS_PRESERVE_PAYLOAD): Do not
condition on [__mips_hard_float].
Similar to BZ#19387 and BZ#20971, both i686 memchr optimized assembly
implementations (memchr-sse2-bsf and memchr-sse2) do not handle the
size overflow correctly.
It is shown by the new tests added by commit 3daef2c8ee, where
both implementation fails with size as SIZE_MAX.
This patch uses a similar strategy used on 3daef2c8ee, where
saturared math is used for overflow case.
Checked on i686-linux-gnu.
[BZ #21014]
* sysdeps/i386/i686/multiarch/memchr-sse2-bsf.S (MEMCHR): Avoid overflow
in pointer addition.
* sysdeps/i386/i686/multiarch/memchr-sse2.S (MEMCHR): Likewise.
Now that a release branch exists for binutils 2.28, this patch makes
build-many-glibcs.py use that by default in place of 2.27.
* scripts/build-many-glibcs.py (Context.checkout): Default
binutils version to 2.28 branch.
Create a new node for tunables documentation and add notes for the
malloc tunables.
* manual/tunables.texi: New chapter.
* manual/Makefile (chapters): Add it.
* manual/probes.texi (@node): Point to the Tunables chapter.
At the GNU Tools Cauldron 2016, the state of the current tunables
patchset was considered OK with the addition of a way to select the
frontend to be used for the tunables. That is, to avoid being locked
in to one type of frontend initially, it should be possible to build
tunables with a different frontend with something as simple as a
configure switch.
To that effect, this patch enhances the --enable-tunables option to
accept more values than just 'yes' or 'no'. The current frontend (and
default when enable-tunables is 'yes') is called 'valstring', to
select the frontend where a single environment variable is set to a
colon-separated value string. More such frontends can be added in
future.
* Makeconfig (have-tunables): Check for non-negative instead
of positive.
* configure.ac: Add 'valstring' as a valid value for
--enable-tunables.
* configure: Regenerate.
* elf/Makefile (have-tunables): Check for non-negative instead
of positive.
(CPPFLAGS-dl-tunables.c): Define TUNABLES_FRONTEND for
dl-tunables.c.
* elf/dl-tunables.c (GLIBC_TUNABLES): Define only when
TUNABLES_FRONTEND == TUNABLES_FRONTEND_valstring.
(tunables_strdup): Likewise.
(disable_tunables): Likewise.
(parse_tunables): Likewise.
(__tunables_init): Process GLIBC_TUNABLES envvar only when.
TUNABLES_FRONTEND == TUNABLES_FRONTEND_valstring.
* elf/dl-tunables.h (TUNABLES_FRONTEND_valstring): New macro.
(TUNABLES_FRONTEND_yes): New macro, define as
TUNABLES_FRONTEND_valstring by default.
* manual/install.texi: Document new acceptable values for
--enable-tunables.
* INSTALL: Regenerate.
Read tunables values from the users using the GLIBC_TUNABLES
environment variable. The value of this variable is a colon-separated
list of name=value pairs. So a typical string would look like this:
GLIBC_TUNABLES=glibc.malloc.mmap_threshold=2048:glibc.malloc.trim_threshold=1024
* config.make.in (have-loop-to-function): Define.
* elf/Makefile (CFLAGS-dl-tunables.c): Add
-fno-tree-loop-distribute-patterns.
* elf/dl-tunables.c: Include libc-internals.h.
(GLIBC_TUNABLES): New macro.
(tunables_strdup): New function.
(parse_tunables): New function.
(min_strlen): New function.
(__tunables_init): Use the new functions and macro.
(disable_tunable): Disable tunable from GLIBC_TUNABLES.
* malloc/tst-malloc-usable-tunables.c: New test case.
* malloc/tst-malloc-usable-static-tunables.c: New test case.
* malloc/Makefile (tests, tests-static): Add tests.
The tunables framework allows us to uniformly manage and expose global
variables inside glibc as switches to users. tunables/README has
instructions for glibc developers to add new tunables.
Tunables support can be enabled by passing the --enable-tunables
configure flag to the configure script. This patch only adds a
framework and does not pose any limitations on how tunable values are
read from the user. It also adds environment variables used in malloc
behaviour tweaking to the tunables framework as a PoC of the
compatibility interface.
* manual/install.texi: Add --enable-tunables option.
* INSTALL: Regenerate.
* README.tunables: New file.
* Makeconfig (CPPFLAGS): Define TOP_NAMESPACE.
(before-compile): Generate dl-tunable-list.h early.
* config.h.in: Add HAVE_TUNABLES.
* config.make.in: Add have-tunables.
* configure.ac: Add --enable-tunables option.
* configure: Regenerate.
* csu/init-first.c (__libc_init_first): Move
__libc_init_secure earlier...
* csu/init-first.c (LIBC_START_MAIN):... to here.
Include dl-tunables.h, libc-internal.h.
(LIBC_START_MAIN) [!SHARED]: Initialize tunables for static
binaries.
* elf/Makefile (dl-routines): Add dl-tunables.
* elf/Versions (ld): Add __tunable_set_val to GLIBC_PRIVATE
namespace.
* elf/dl-support (_dl_nondynamic_init): Unset MALLOC_CHECK_
only when !HAVE_TUNABLES.
* elf/rtld.c (process_envvars): Likewise.
* elf/dl-sysdep.c [HAVE_TUNABLES]: Include dl-tunables.h
(_dl_sysdep_start): Call __tunables_init.
* elf/dl-tunable-types.h: New file.
* elf/dl-tunables.c: New file.
* elf/dl-tunables.h: New file.
* elf/dl-tunables.list: New file.
* malloc/tst-malloc-usable-static.c: New test case.
* malloc/Makefile (tests-static): Add it.
* malloc/arena.c [HAVE_TUNABLES]: Include dl-tunables.h.
Define TUNABLE_NAMESPACE.
(DL_TUNABLE_CALLBACK (set_mallopt_check)): New function.
(DL_TUNABLE_CALLBACK_FNDECL): New macro. Use it to define
callback functions.
(ptmalloc_init): Set tunable values.
* scripts/gen-tunables.awk: New file.
* sysdeps/mach/hurd/dl-sysdep.c: Include dl-tunables.h.
(_dl_sysdep_start): Call __tunables_init.
This causes more test programs to link in the support_record_failure
function, which triggers an early call to mmap from an ELF
constructor, but this should not have side effects intefering
with the functionality actually under test (unlike, say, a call
to malloc).
This is a new implementation for condition variables, required
after http://austingroupbugs.net/view.php?id=609 to fix bug 13165. In
essence, we need to be stricter in which waiters a signal or broadcast
is required to wake up; this couldn't be solved using the old algorithm.
ISO C++ made a similar clarification, so this also fixes a bug in
current libstdc++, for example.
We can't use the old algorithm anymore because futexes do not guarantee
to wake in FIFO order. Thus, when we wake, we can't simply let any
waiter grab a signal, but we need to ensure that one of the waiters
happening before the signal is woken up. This is something the previous
algorithm violated (see bug 13165).
There's another issue specific to condvars: ABA issues on the underlying
futexes. Unlike mutexes that have just three states, or semaphores that
have no tokens or a limited number of them, the state of a condvar is
the *order* of the waiters. A waiter on a semaphore can grab a token
whenever one is available; a condvar waiter must only consume a signal
if it is eligible to do so as determined by the relative order of the
waiter and the signal.
Therefore, this new algorithm maintains two groups of waiters: Those
eligible to consume signals (G1), and those that have to wait until
previous waiters have consumed signals (G2). Once G1 is empty, G2
becomes the new G1. 64b counters are used to avoid ABA issues.
This condvar doesn't yet use a requeue optimization (ie, on a broadcast,
waking just one thread and requeueing all others on the futex of the
mutex supplied by the program). I don't think doing the requeue is
necessarily the right approach (but I haven't done real measurements
yet):
* If a program expects to wake many threads at the same time and make
that scalable, a condvar isn't great anyway because of how it requires
waiters to operate mutually exclusive (due to the mutex usage). Thus, a
thundering herd problem is a scalability problem with or without the
optimization. Using something like a semaphore might be more
appropriate in such a case.
* The scalability problem is actually at the mutex side; the condvar
could help (and it tries to with the requeue optimization), but it
should be the mutex who decides how that is done, and whether it is done
at all.
* Forcing all but one waiter into the kernel-side wait queue of the
mutex prevents/avoids the use of lock elision on the mutex. Thus, it
prevents the only cure against the underlying scalability problem
inherent to condvars.
* If condvars use short critical sections (ie, hold the mutex just to
check a binary flag or such), which they should do ideally, then forcing
all those waiter to proceed serially with kernel-based hand-off (ie,
futex ops in the mutex' contended state, via the futex wait queues) will
be less efficient than just letting a scalable mutex implementation take
care of it. Our current mutex impl doesn't employ spinning at all, but
if critical sections are short, spinning can be much better.
* Doing the requeue stuff requires all waiters to always drive the mutex
into the contended state. This leads to each waiter having to call
futex_wake after lock release, even if this wouldn't be necessary.
[BZ #13165]
* nptl/pthread_cond_broadcast.c (__pthread_cond_broadcast): Rewrite to
use new algorithm.
* nptl/pthread_cond_destroy.c (__pthread_cond_destroy): Likewise.
* nptl/pthread_cond_init.c (__pthread_cond_init): Likewise.
* nptl/pthread_cond_signal.c (__pthread_cond_signal): Likewise.
* nptl/pthread_cond_wait.c (__pthread_cond_wait): Likewise.
(__pthread_cond_timedwait): Move here from pthread_cond_timedwait.c.
(__condvar_confirm_wakeup, __condvar_cancel_waiting,
__condvar_cleanup_waiting, __condvar_dec_grefs,
__pthread_cond_wait_common): New.
(__condvar_cleanup): Remove.
* npt/pthread_condattr_getclock.c (pthread_condattr_getclock): Adapt.
* npt/pthread_condattr_setclock.c (pthread_condattr_setclock):
Likewise.
* npt/pthread_condattr_getpshared.c (pthread_condattr_getpshared):
Likewise.
* npt/pthread_condattr_init.c (pthread_condattr_init): Likewise.
* nptl/tst-cond1.c: Add comment.
* nptl/tst-cond20.c (do_test): Adapt.
* nptl/tst-cond22.c (do_test): Likewise.
* sysdeps/aarch64/nptl/bits/pthreadtypes.h (pthread_cond_t): Adapt
structure.
* sysdeps/arm/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/ia64/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/m68k/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/microblaze/nptl/bits/pthreadtypes.h (pthread_cond_t):
Likewise.
* sysdeps/mips/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/nios2/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/s390/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/sh/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/tile/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/pthreadtypes.h (pthread_cond_t):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h (pthread_cond_t):
Likewise.
* sysdeps/x86/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/nptl/internaltypes.h (COND_NWAITERS_SHIFT): Remove.
(COND_CLOCK_BITS): Adapt.
* sysdeps/nptl/pthread.h (PTHREAD_COND_INITIALIZER): Adapt.
* nptl/pthreadP.h (__PTHREAD_COND_CLOCK_MONOTONIC_MASK,
__PTHREAD_COND_SHARED_MASK): New.
* nptl/nptl-printers.py (CLOCK_IDS): Remove.
(ConditionVariablePrinter, ConditionVariableAttributesPrinter): Adapt.
* nptl/nptl_lock_constants.pysym: Adapt.
* nptl/test-cond-printers.py: Adapt.
* sysdeps/unix/sysv/linux/hppa/internaltypes.h (cond_compat_clear,
cond_compat_check_and_clear): Adapt.
* sysdeps/unix/sysv/linux/hppa/pthread_cond_timedwait.c: Remove file ...
* sysdeps/unix/sysv/linux/hppa/pthread_cond_wait.c
(__pthread_cond_timedwait): ... and move here.
* nptl/DESIGN-condvar.txt: Remove file.
* nptl/lowlevelcond.sym: Likewise.
* nptl/pthread_cond_timedwait.c: Likewise.
* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_broadcast.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_signal.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_timedwait.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_wait.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i586/pthread_cond_broadcast.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i586/pthread_cond_signal.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i586/pthread_cond_timedwait.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i586/pthread_cond_wait.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i686/pthread_cond_broadcast.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i686/pthread_cond_signal.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i686/pthread_cond_timedwait.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i686/pthread_cond_wait.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/pthread_cond_broadcast.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/pthread_cond_signal.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S: Likewise.
TS 18661-1 defines fromfp functions (fromfp, fromfpx, ufromfp,
ufromfpx, and float and long double variants) to convert from
floating-point to an integer type with any signedness and any given
width up to that of intmax_t, in any of the five IEEE rounding modes
(the usual four for binary floating point, plus rounding to nearest
with ties rounding away from zero), with control of whether in-range
non-integer values should result in the "inexact" exception being
raised. This patch implements these functions for glibc.
These implementations are (apart from raising exceptions) pure integer
implementations; it's entirely possible optimized versions could be
devised for some architectures. A common math/fromfp.h header
provides various common helper code that can readily be shared between
the implementations for different types. For each type, the bulk of
the implementation is also shared between the four functions, with
wrappers that define UNSIGNED and INEXACT macros appropriately before
including the main implementation.
As the functions return intmax_t and uintmax_t without math.h being
allowed to expose those typedef names, they are declared using
__intmax_t and __uintmax_t as obtained from <bits/types.h>.
The FP_INT_* rounding direction macros are defined as ascending
integers in the order the names are listed in the TS; I see no
significant value in allowing architectures to vary the values of
them.
The libm-test machinery is duly adapted to handle unsigned int
arguments, and intmax_t and uintmax_t results. Because each test
input is generally tested for four functions, five rounding modes and
several different widths, the libm-test.inc additions are very large.
Thus, the diffs in the body of this message exclude the libm-test.inc
changes, with the full patch being attached gzipped. The bulk of the
new tests were generated (expanded from a test input plus rounding
results and information about where it lies in the relevant interval
between integers, to libm-test tests for all relevant combinations of
function, rounding direction and width) by a script that's included in
the patch as math/gen-fromfp-tests.py (input data
math/gen-fromfp-tests-inputs); as an ad hoc script that's not really
expected to be rerun, it's not very polished, but it's at least
plausibly useful for adding any further tests for these functions in
future. I may split the libm-test tests up by function in future (so
both libm-test.inc and auto-libm-test-out are split into separate
files, and the tests for each function are also built and run
separately), but not for 2.25.
For no obvious reason, adding tgmath tests for the new functions
resulted in -Wuninitialized errors from test-tgmath.c about the
variable i being used uninitialized. Those errors were correct - the
variable is read by the frexp version in test-tgmath.c (where real
frexp would write through that pointer instead of reading it) - but I
don't know why this patch would result in the pre-existing issue being
newly detected. The patch initializes the variable to avoid those
errors.
With these changes, glibc 2.25 should have all the library features
from TS 18661-1 other than the functions that round result to narrower
type (and constant rounding directions, but I'm considering those
mainly a compiler feature not a library one).
Tested for x86_64, x86, mips64 and powerpc.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(fromfp): New declaration.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfpx): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfp): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfpx): Likewise.
* math/tgmath.h (__TGMATH_TERNARY_FIRST_REAL_RET_ONLY): New macro.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfp): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfp): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfpx): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfpx): Likewise.
* math/math.h: Include <bits/types.h>.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_INT_UPWARD): New enum
constant and macro.
(FP_INT_DOWNWARD): Likewise.
(FP_INT_TOWARDZERO): Likewise.
(FP_INT_TONEARESTFROMZERO): Likewise.
(FP_INT_TONEAREST): Likewise.
* math/Versions (fromfp): New libm symbol at version GLIBC_2.25.
(fromfpf): Likewise.
(fromfpl): Likewise.
(ufromfp): Likewise.
(ufromfpf): Likewise.
(ufromfpl): Likewise.
(fromfpx): Likewise.
(fromfpxf): Likewise.
(fromfpxl): Likewise.
(ufromfpx): Likewise.
(ufromfpxf): Likewise.
(ufromfpxl): Likewise.
* math/Makefile (libm-calls): Add s_fromfpF, s_ufromfpF,
s_fromfpxF and s_ufromfpxF.
* math/gen-fromfp-tests.py: New file.
* math/gen-fromfp-tests-inputs: Likewise.
* math/libm-test.inc: Include <stdint.h>
(check_intmax_t): New function.
(check_uintmax_t): Likewise.
(struct test_fiu_M_data): New type.
(struct test_fiu_U_data): Likewise.
(RUN_TEST_fiu_M): New macro.
(RUN_TEST_LOOP_fiu_M): Likewise.
(RUN_TEST_fiu_U): Likewise.
(RUN_TEST_LOOP_fiu_U): Likewise.
(fromfp_test_data): New array.
(fromfp_test): New function.
(fromfpx_test_data): New array.
(fromfpx_test): New function.
(ufromfp_test_data): New array.
(ufromfp_test): New function.
(ufromfpx_test_data): New array.
(ufromfpx_test): New function.
(main): Call fromfp_test, fromfpx_test, ufromfp_test and
ufromfpx_test.
* math/gen-libm-test.pl (parse_args): Handle u, M and U descriptor
characters.
* math/test-tgmath-ret.c: Include <stdint.h>.
(rm): New variable.
(width): Likewise.
(CHECK_RET_CONST_TYPE): Take extra arguments and pass them to
called function.
(CHECK_RET_CONST_FLOAT): Take extra arguments and pass them to
CHECK_RET_CONST_TYPE.
(CHECK_RET_CONST_DOUBLE): Likewise.
(CHECK_RET_CONST_LDOUBLE): Likewise.
(CHECK_RET_CONST): Take extra arguments and pass them to calls
macros.
(fromfp): New CHECK_RET_CONST call.
(ufromfp): Likewise.
(fromfpx): Likewise.
(ufromfpx): Likewise.
(do_test): Call check_return_fromfp, check_return_ufromfp,
check_return_fromfpx and check_return_ufromfpx.
* math/test-tgmath.c: Include <stdint.h>
(NCALLS): Increase to 138.
(F(compile_test)): Initialize i. Call fromfp functions.
(F(fromfp)): New function.
(F(fromfpx)): Likewise.
(F(ufromfp)): Likewise.
(F(ufromfpx)): Likewise.
* manual/arith.texi (Rounding Functions): Document FP_INT_UPWARD,
FP_INT_DOWNWARD, FP_INT_TOWARDZERO, FP_INT_TONEARESTFROMZERO,
FP_INT_TONEAREST, fromfp, fromfpf, fromfpl, ufromfp, ufromfpf,
ufromfpl, fromfpx, fromfpxf, fromfpxl, ufromfpx, ufromfpxf and
ufromfpxl.
* manual/libm-err-tab.pl (@all_functions): Add fromfp, fromfpx,
ufromfp and ufromfpx.
* math/fromfp.h: New file.
* sysdeps/ieee754/dbl-64/s_fromfp.c: Likewise.
* sysdeps/ieee754/dbl-64/s_fromfp_main.c: Likewise.
* sysdeps/ieee754/dbl-64/s_fromfpx.c: Likewise.
* sysdeps/ieee754/dbl-64/s_ufromfp.c: Likewise.
* sysdeps/ieee754/dbl-64/s_ufromfpx.c: Likewise.
* sysdeps/ieee754/flt-32/s_fromfpf.c: Likewise.
* sysdeps/ieee754/flt-32/s_fromfpf_main.c: Likewise.
* sysdeps/ieee754/flt-32/s_fromfpxf.c: Likewise.
* sysdeps/ieee754/flt-32/s_ufromfpf.c: Likewise.
* sysdeps/ieee754/flt-32/s_ufromfpxf.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_fromfpl.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_fromfpl_main.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_fromfpxl.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_ufromfpl.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_ufromfpxl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_fromfpl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_fromfpl_main.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_fromfpxl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_ufromfpl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_ufromfpxl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_fromfpl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_fromfpl_main.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_fromfpxl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_ufromfpl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_ufromfpxl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fromfp,
ufromfp, fromfpx and ufromfpx.
(CFLAGS-nldbl-fromfp.c): New variable.
(CFLAGS-nldbl-fromfpx.c): Likewise.
(CFLAGS-nldbl-ufromfp.c): Likewise.
(CFLAGS-nldbl-ufromfpx.c): Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-compat.h: Include <stdint.h>.
* sysdeps/ieee754/ldbl-opt/nldbl-fromfp.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fromfpx.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-ufromfp.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-ufromfpx.c: Likewise.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
This change also removes the preprocessor-based function renaming.
It also applied to tests in resolv/, which ended up running against
the historic functions.
_endhtent was not part of the ABI because it is not listed in the
resolv/Versions file.
TS 18661-1 defines *fromfp* functions, which are declared in math.h
and whose return types are intmax_t and uintmax_t, without allowing
math.h to define those typedefs. (This is similar to e.g. ISO C
declaring vprintf in stdio.h without allowing that header to define
va_list.) Thus, math.h needs to access those typedefs under internal
names.
This patch accordingly arranges for bits/types.h (which defines only
internal names, not public *_t typedefs) to define __intmax_t and
__uintmax_t. stdint.h is made to use bits/types.h and define intmax_t
and uintmax_t using __intmax_t and __uintmax_t, to avoid duplication
of information. (It would be reasonable to define more of the types
in stdint.h - and in sys/types.h, where it duplicates such types -
using information already available in bits/types.h.) The idea is
that the subsequent addition of fromfp functions would then make
math.h include bits/types.h and use __intmax_t and __uintmax_t as the
return types of those functions.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* bits/types.h (__intmax_t): New typedef.
(__uintmax_t): Likewise.
* sysdeps/generic/stdint.h: Include <bits/types.h>.
(intmax_t): Define using __intmax_t.
(uintmax_t): Define using __uintmax_t.
The support/tst-support_record_failure-2.out test attempts to run
built code even if run-built-tests = no, so failing with
build-many-glibcs.py for all architectures whose code cannot be run on
the system running the script. This patch disables the test in that
case.
Tested for x86_64 (native), and for aarch64 with build-many-glibcs.py.
* support/Makefile (tests-special): Make definition conditional on
[$(run-built-tests) = yes].
($(objpfx)tst-support_record_failure-2.out): Make rule conditional
on [$(run-built-tests) = yes].
Both regexes end with a "*." which means the previous match can be
omitted, and then the . allows them to match any input at all.
This means tools like coreutils' `rm -i` will always delete things
when prompted because the yesexpr regex matches all inputs (even
the negative ones).
In my change to add configure tests for python I had a brainfart where
I tried to filter out unsupported tests from tests-printers-programs
instead of tests-printers to select tests to build. I realize now
that all of that is completely unnecessary and it would be safe to
just build the tests as long as we don't try to run it.
This patch reverts that bit of the change. Tested with
run-built-tests = no in config.make.
* Rules (tests): Add tests-printers-programs to tests to be
built.
This patch adds a simple SYSV shared memory test to check for correct
argument passing on kernel. The idea is neither to be an extensive
testing nor to check for any specific Linux test.
* sysvipc/Makefile (tests): Add test-sysvshm.
* sysvipc/test-sysvshm.c: New file.
this patch add a direct call to shmget syscall if it is supported by
kernel features.
Checked on x86_64, i686, powerpc64le, aarch64, and armhf.
* sysdeps/unix/sysv/linux/alpha/syscalls.list (shmget): Remove.
* sysdeps/unix/sysv/linux/arm/syscalls.list (shmget): Likewise.
* sysdeps/unix/sysv/linux/generic/syscalls.list (shmget): Likewise.
* sysdeps/unix/sysv/linux/hppa/syscalls.list (shmget): Likewise.
* sysdeps/unix/sysv/linux/ia64/syscalls.list (shmget): Likewise.
* sysdeps/unix/sysv/linux/microblaze/syscalls.list (shmget): Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/syscalls.list (shmget):
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/syscalls.list (shmget):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/syscalls.list (shmget): Likewise.
* sysdeps/unix/sysv/linux/shmget.c (shmget): Use shmget syscall if it
is defined.
this patch add a direct call to shmdt syscall if it is supported by
kernel features.
hecked on x86_64, i686, powerpc64le, aarch64, and armhf.
* sysdeps/unix/sysv/linux/alpha/syscalls.list (shmdt): Remove.
* sysdeps/unix/sysv/linux/arm/syscalls.list (shmdt): Likewise.
* sysdeps/unix/sysv/linux/generic/syscalls.list (shmdt): Likewise.
* sysdeps/unix/sysv/linux/hppa/syscalls.list (shmdt): Likewise.
* sysdeps/unix/sysv/linux/ia64/syscalls.list (shmdt): Likewise.
* sysdeps/unix/sysv/linux/microblaze/syscalls.list (shmdt): Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/syscalls.list (shmdt):
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/syscalls.list (shmdt):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/syscalls.list (shmdt): Likewise.
* sysdeps/unix/sysv/linux/shmdt.c (shmdt): Use shmdt syscall if it is
defined.
This patch consolidates the shmctl Linux implementation in only
one default file, sysdeps/unix/sysv/linux/shmctl.c. If tries to use
the direct syscall if it is supported, otherwise will use the old ipc
multiplex mechanism.
The patch also simplify header inclusion and reorganize internal
compat symbol to be built only if old ipc is defined.
Checked on x86_64, i686, powerpc64le, aarch64, and armhf.
* sysdeps/unix/sysv/linux/alpha/Makefile (sysdeps_routines): Remove
oldshmctl.
* sysdeps/unix/sysv/linux/alpha/syscalls.list (shmctl): Remove.
* sysdeps/unix/sysv/linux/arm/syscalls.list (shmctl): Likewise.
* sysdeps/unix/sysv/linux/generic/syscalls.list (shmctl): Likewise.
* sysdeps/unix/sysv/linux/hppa/syscalls.list (shmctl): Likewise.
* sysdeps/unix/sysv/linux/ia64/syscalls.list (shmctl): Likewise.
* sysdeps/unix/sysv/linux/microblaze/syscalls.list (shmctl): Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/syscalls.list (shmctl):
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/syscalls.list (shmctl):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/syscalls.list (shmctl): Likewise.
* sysdeps/unix/sysv/linux/alpha/shmctl.c: Remove file.
* sysdeps/unix/sysv/linux/arm/shmctl.c: Likewise.
* sysdeps/unix/sysv/linux/microblaze/shmctl.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/shmctl.c: Use default
implementation.
* sysdeps/unix/sysv/linux/shmctl.c (__new_shmctl): Use shmctl syscall
if it is defined.
This patch adds a simple SYSV semaphore test to check for correct
argument passing on kernel. The idea is neither to be an extensive
testing nor to check for any specific Linux test.
* sysvipc/Makefile (tests): Add test-sysvsem.
* sysvipc/test-sysvsem.c: New file.
This patch consolidates the semtimedop Linux implementation in only
one default file, sysdeps/unix/sysv/linux/semtimedop.c. If tries to use
the direct syscall if it is supported, otherwise will use the old ipc
multiplex mechanism.
Checked on x86_64, i686, powerpc64le, aarch64, and armhf.
* sysdeps/unix/sysv/linux/alpha/syscalls.list (semtimedop): Remove.
* sysdeps/unix/sysv/linux/arm/syscalls.list (semtimedop): Likewise.
* sysdeps/unix/sysv/linux/generic/syscalls.list (semtimedop):
Likewise.
* sysdeps/unix/sysv/linux/hppa/syscalls.list (semtimedop): Likewise.
* sysdeps/unix/sysv/linux/ia64/syscalls.list (semtimedop): Likewise.
* sysdeps/unix/sysv/linux/microblaze/syscalls.list (semtimedop):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/syscalls.list (semtimedop):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/syscalls.list (semtimedop): Likewise.
* sysdeps/unix/sysv/linux/m68k/semtimedop.S: Remove file.
* sysdeps/unix/sysv/linux/s390/semtimedop.c: Reorganize headers and
add a comment about s390 syscall difference from default one.
* sysdeps/unix/sysv/linux/semtimedop.c (semtimedop): Use semtimedop
syscall if it is defined.
This patch add a direct call to semop syscall if it is supported by
kernel headers.
Checked on x86_64, i686, powerpc64le, aarch64, and armhf.
* sysdeps/unix/sysv/linux/alpha/syscalls.list (semop): Remove.
* sysdeps/unix/sysv/linux/arm/syscalls.list (semop): Likewise.
* sysdeps/unix/sysv/linux/generic/syscalls.list (semop): Likewise.
* sysdeps/unix/sysv/linux/hppa/syscalls.list (semop): Likewise.
* sysdeps/unix/sysv/linux/ia64/syscalls.list (semop): Likewise.
* sysdeps/unix/sysv/linux/microblaze/syscalls.list (semop): Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/syscalls.list (semop):
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/syscalls.list (semop):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/syscalls.list (semop): Likewise.
* sysdeps/unix/sysv/linux/semop.c (semop): Use semop syscall if it is
defined.
