This includes a fix for big-endian in AdvSIMD log, some cosmetic
changes, and numerous small optimisations mainly around inlining and
using indexed variants of MLA intrinsics.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Starting with commit e57d8fc97b
"S390: Always use svc 0"
clone clobbers the call-saved register r7 in error case:
function or stack is NULL.
This patch restores the saved registers also in the error case.
Furthermore the existing test misc/tst-clone is extended to check
all error cases and that clone does not clobber registers in this
error case.
When glibc is built with ISA level 3 or higher by default, the resulting
glibc binaries won't run on SSE or FMA4 processors. Exclude SSE, AVX and
FMA4 variants in libm multiarch when ISA level 3 or higher is enabled by
default.
When glibc is built with ISA level 2 enabled by default, only keep SSE4.1
variant.
Fixes BZ 31335.
NB: elf/tst-valgrind-smoke test fails with ISA level 4, because valgrind
doesn't support AVX512 instructions:
https://bugs.kde.org/show_bug.cgi?id=383010
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Reflow and sort Makefile.
Code generation changes present due to link order changes.
No regressions on x86_64 and i686.
Tested with build-many-glibcs.py for x86_64-gnu.
Reflow and sort Makefile.
No code generation changes in non-test binary artifacts.
No regressions on x86_64 and i686.
Tested with build-many-glibcs.py for x86_64-gnu.
Add APX registers to STATE_SAVE_MASK so that APX registers are saved in
ld.so trampoline. This fixes BZ #31371.
Also update STATE_SAVE_OFFSET and STATE_SAVE_MASK for i386 which will
be used by i386 _dl_tlsdesc_dynamic.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This patch adds more benchtests for rounding functions.
The double inputs are copied from trunc-inputs, the float inputs are copied from truncf-inputs. and the rintf is copied from rint-inputs.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Testing for `None`-ness with `==` operator is frowned upon and causes
warnings in at least "LGTM" python linter. Fix that.
Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The optimization is not faster than the generic algorithm,
using the bench-strstr the geometric mean running on a POWER10 machine
using gcc 13.1.1 is 482.47 while the default __strstr_ppc is 340.97
(which uses the generic implementation).
Also, there is no need to redirect the internal str*/mem* call
to optimized version, internal ifunc is supported and enabled
for internal calls (meaning that the generic implementation
will use any asm optimization if available).
Checked on powerpc64le-linux-gnu.
Reviewed-by: Peter Bergner <bergner@linux.ibm.com>
This patch adds some --disable-multi-arch variants for s390x.
As the used IFUNC variants and __GI symbols depend on the used
gcc -march=cpu-level, there are multiple new configurations.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The FSR version field is read-only and might be non-zero.
This allows math/test-fpucw* to correctly pass when the version is
non-zero.
Signed-off-by: Daniel Cederman <cederman@gaisler.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Commit ff026950e2 ("Add a C wrapper for
prctl [BZ #25896]") replaced the assembler wrapper with a C function.
However, on powerpc64le-linux-gnu, the C variadic function
implementation requires extra work in the caller to set up the
parameter save area. Calling a function that needs a parameter save
area without one (because the prototype used indicates the function is
not variadic) corrupts the caller's stack. The Linux manual pages
project documents prctl as a non-variadic function. This has resulted
in various projects over the years using non-variadic prototypes,
including the sanitizer libraries in LLVm and GCC (GCC PR 113728).
This commit switches back to the assembler implementation on most
targets and only keeps the C implementation for x86-64 x32.
Also add the __prctl_time64 alias from commit
b39ffab860 ("Linux: Add time64 alias for
prctl") to sysdeps/unix/sysv/linux/syscalls.list; it was not yet
present in commit ff026950e2.
This restores the old ABI on powerpc64le-linux-gnu, thus fixing
bug 29770.
Reviewed-By: Simon Chopin <simon.chopin@canonical.com>
Before this change, we incorrectly used the SSE2 variant in the
implementation, without checking that the system actually supports
SSE2.
Tested-by: Sam James <sam@gentoo.org>
'_' is used in Makefile variable names and many variables end with
"^# name". Relax sort-makefile-lines.py to allow '_' in name and
"^# name" as variable end. This fixes BZ #31385.
"number of arguments, from zero to five" is wrong, because on Linux maximal number
of arguments is 6, not 5. Also, maximal number of arguments is kernel-dependent,
so let's not include it here at all.
Moreover, "Each kind of system call has a definite number of arguments" is questionable.
Think about SYS_open on Linux, which takes 2 or 3 arguments. Or SYS_clone on Linux x86_64, which
takes 2 to 5 arguments. So I propose to fully remove this sentence.
Signed-off-by: Askar Safin <safinaskar@zohomail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
__builtin_ffs{,ll} basically on __builtin_ctz{,ll} in MIPS GCC compiler.
The hardware ctz instructions were available after MIPS{32,64} Release1. By using builtin ctz. It can also reduce code size of ffs/ffsll.
Checked on mips o32. mips64.
Signed-off-by: Junxian Zhu <zhujunxian@oss.cipunited.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Maxim Kuvyrkov <maxim.kuvyrkov@linaro.org>
For AMD Zen3+ architecture, the performance of the vectorized loop is
slightly better than ERMS.
Checked on x86_64-linux-gnu on Zen3.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The REP MOVSB usage on memcpy/memmove does not show much performance
improvement on Zen3/Zen4 cores compared to the vectorized loops. Also,
as from BZ 30994, if the source is aligned and the destination is not
the performance can be 20x slower.
The performance difference is noticeable with small buffer sizes, closer
to the lower bounds limits when memcpy/memmove starts to use ERMS. The
performance of REP MOVSB is similar to vectorized instruction on the
size limit (the L2 cache). Also, there is no drawback to multiple cores
sharing the cache.
Checked on x86_64-linux-gnu on Zen3.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Some shadow stack test scripts use the '==' operator with the 'test'
command to validate exit codes resulting in the following error:
sysdeps/x86_64/tst-shstk-legacy-1e.sh: 31: test: 139: unexpected operator
The '==' operator is invalid for the 'test' command, use '-eq' like the
previous call to 'test'.
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Change "\(" and "\)" to "\\(" and "\\)" in test_printers_common.py. This
fixes the test warning:
.../scripts/test_printers_common.py:101: SyntaxWarning: invalid escape sequence '\('
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Linux 6.7 adds a constant SOL_VSOCK (recall that various constants in
include/linux/socket.h are in fact part of the kernel-userspace API
despite that not being a uapi header). Add it to glibc's
bits/socket.h.
Tested for x86_64.
Otherwise on at least x86_64 and s390x there is an unwanted PLT entry
in libc.so when configured with --enable-fortify-source=3 and build
with -Os.
This is observed in elf/check-localplt
Extra PLT reference: libc.so: __strcpy_chk
The call to PLT entry is in inet/ruserpass.c.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The commit 49d877a80b (arm: Remove
_dl_skip_args usage) removed the _SKIP_ARGS literal, which was
previously loader to r4 on loader _start. However, the cleanup did not
remove the following 'ldr r4, [sl, r4]' on _dl_start_user, used to check
to skip the arguments after ld self-relocations.
In my testing, the kernel initially set r4 to 0, which makes the
ldr instruction just read the _GLOBAL_OFFSET_TABLE_. However, since r4
is a callee-saved register; a different runtime might not zero
initialize it and thus trigger an invalid memory access.
Checked on arm-linux-gnu.
Reported-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
On LoongArch GCC compiles __builtin_ffs{,ll} to basically
`(x ? __builtin_ctz (x) : -1) + 1`. Since a hardware ctz instruction is
available, this is much better than the table-driven generic
implementation.
Tested on loongarch64.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
On s390x, I get warnings like this when do_one_test is inlined with SIZE_MAX:
In function ‘do_one_test’,
inlined from ‘do_overflow_tests’ at tst-strlcat2.c:184:2:
tst-strlcat2.c:49:18: error: ‘strnlen’ specified bound [18446744073709550866, 18446744073709551615] exceeds maximum object size 9223372036854775807 [-Werror=stringop-overflow=]
49 | # define STRNLEN strnlen
| ^
tst-strlcat2.c:89:23: note: in expansion of macro ‘STRNLEN’
89 | size_t dst_length = STRNLEN (dst, n);
| ^~~~~~~
This patch just marks the do_one_test function as noinline as also done in test-strncat.c:
Fix stringop-overflow warning in test-strncat.
https://sourceware.org/git/?p=glibc.git;a=commit;h=51aeab9a363a0d000d0912aa3d6490463a26fba2
