Add the constant ARPHRD_MCTP, from Linux 5.15, to net/if_arp.h, along
with ARPHRD_CAN which was added to Linux in version 2.6.25 (commit
cd05acfe65ed2cf2db683fa9a6adb8d35635263b, "[CAN]: Allocate protocol
numbers for PF_CAN") but apparently missed for glibc at the time.
Tested for x86_64.
Align the stack pointer to 128 bits during the call to _dl_init() as
specified by the RISC-V ABI [1]. This fixes the elf/tst-align2 test.
Fixes bug 28703.
[1] https://github.com/riscv-non-isa/riscv-elf-psabi-doc
The RISC-V ABI [1] mandates that "the stack pointer shall be aligned to
a 128-bit boundary upon procedure entry". This as not the case in clone.
This fixes the misc/tst-misalign-clone-internal and
misc/tst-misalign-clone tests.
Fixes bug 28702.
[1] https://github.com/riscv-non-isa/riscv-elf-psabi-doc
On KVM guests running on some AMD systems, the IBRS feature is reported
as a synthetic feature using the Intel feature, while the cpuinfo entry
keeps the same. Handle that by first checking the presence of the Intel
feature on AMD systems.
Fixes bug 28704.
The syscall function does not allocate the extra stack frame for scv like other
assembly syscalls using DO_CALL_SCV. So after commit d120fb9941 changed the
offset that is used to save LR, syscall ended up using an invalid offset,
causing regressions on powerpc64. So make sure the extra stack frame is
allocated in syscall.S as well to make it consistent with other uses of
DO_CALL_SCV and avoid similar issues in the future.
Tested on powerpc, powerpc64, and powerpc64le (with and without scv)
Reviewed-by: Raphael M Zinsly <rzinsly@linux.ibm.com>
The length and object size arguments were swapped around for realpath.
Also add a smoke test so that any changes in this area get caught in
future.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This matches what is currently in nss/nsswitch.conf. The new ordering
matches what most distributions use in their installed configuration
files.
It is common to add localhost to /etc/hosts because the name does not
exist in the DNS, but is commonly used as a host name.
With the built-in "dns [!UNAVAIL=return] files" default, dns is
searched first and provides an answer for "localhost" (NXDOMAIN).
We never look at the files database as a result, so the contents of
/etc/hosts is ignored. This means that "getent hosts localhost"
fail without a /etc/nsswitch.conf file, even though the host name
is listed in /etc/hosts.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Due to PIE-by-default, PIC is now defined in more cases. libc.a
does not have _rtld_global_ro, and statically linking setcontext
fails. SHARED is the right condition to use, so that libc.a
references _dl_hwcap instead of _rtld_global_ro.
For static PIE support, the !SHARED case would still have to be made
PIC. This patch does not achieve that.
Fixes commit 23645707f1
("Replace --enable-static-pie with --disable-default-pie").
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
I (and maybe one or two others) added a (C) to the copyright notice
regardless of the contribution checklist[1] not mentioning it. Fix all
these instances so that the notice reads as "Copyright The GNU Toolchain
Authors" across the source code.
[1] https://sourceware.org/glibc/wiki/Contribution%20checklist
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The current limit on MALLOC_MMAP_THRESHOLD is either 1 Mbyte (for
32-bit apps) or 32 Mbytes (for 64-bit apps). This value was set by a
patch dated 2006 (15 years ago). Attempts to set the threshold higher
are currently ignored.
The default behavior is appropriate for many highly parallel
applications where many processes or threads are sharing RAM. In other
situations where the number of active processes or threads closely
matches the number of cores, a much higher limit may be desired by the
application designer. By today's standards on personal computers and
small servers, 2 Gbytes of RAM per core is commonly available. On
larger systems 4 Gbytes or more of RAM is sometimes available.
Instead of raising the limit to match current needs, this patch
proposes to remove the limit of the tunable, leaving the decision up
to the user of a tunable to judge the best value for their needs.
This patch does not change any of the defaults for malloc tunables,
retaining the current behavior of the dynamic malloc mmap threshold.
bugzilla 27801 - Remove upper limit on tunable MALLOC_MMAP_THRESHOLD
Reviewed-by: DJ Delorie <dj@redhat.com>
malloc/
malloc.c changed do_set_mmap_threshold to remove test
for HEAP_MAX_SIZE.
Add the Abkhazian language in the Georgia territory
The ab_GE was just recently added to CLDR, it should be available
in CLDR v41, https://github.com/unicode-org/cldr/pull/1402
The Abkhazian language has been added to Gnome for localization
The locale has been tested on Ubuntu 20.04, Mint 20.2 and Fedora 35 Beta
Signed-off-by: Nart Tlisha <daniel.abzakh@gmail.com>
Reviewed-by: Maxim Kuvyrkov <maxim.kuvyrkov@linaro.org>
Starting with commit b05fae4d8e
"elf: Use the minimal malloc on tunables_strdup",
I get lots of segfaults in static tests on s390x when also using, e.g.:
export GLIBC_TUNABLES="glibc.elision.enable=1"
tunables_strdup callls __minimal_malloc which tries to call __mmap
due to insufficient space left. __mmap itself first setups a new
stack frame and segfaults when copying the stack-protector canary
from thread-pointer. The latter one is not yet setup.
Thus this patch also turns off stack-protection for mmap.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
This patch adds support huge page support on main arena allocation,
enable with tunable glibc.malloc.hugetlb=2. The patch essentially
disable the __glibc_morecore() sbrk() call (similar when memory
tag does when sbrk() call does not support it) and fallback to
default page size if the memory allocation fails.
Checked on x86_64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
It is enabled as default for glibc.malloc.hugetlb set to 2 or higher.
It also uses a non configurable minimum value and maximum value,
currently set respectively to 1 and 4 selected huge page size.
The arena allocation with huge pages does not use MAP_NORESERVE. As
indicate by kernel internal documentation [1], the flag might trigger
a SIGBUS on soft page faults if at memory access there is no left
pages in the pool.
On systems without a reserved huge pages pool, is just stress the
mmap(MAP_HUGETLB) allocation failure. To improve test coverage it is
required to create a pool with some allocated pages.
Checked on x86_64-linux-gnu with no reserved pages, 10 reserved pages
(which trigger mmap(MAP_HUGETBL) failures) and with 256 reserved pages
(which does not trigger mmap(MAP_HUGETLB) failures).
[1] https://www.kernel.org/doc/html/v4.18/vm/hugetlbfs_reserv.html#resv-map-modifications
Reviewed-by: DJ Delorie <dj@redhat.com>
With the morecore hook removed, there is not easy way to provide huge
pages support on with glibc allocator without resorting to transparent
huge pages. And some users and programs do prefer to use the huge pages
directly instead of THP for multiple reasons: no splitting, re-merging
by the VM, no TLB shootdowns for running processes, fast allocation
from the reserve pool, no competition with the rest of the processes
unlike THP, no swapping all, etc.
This patch extends the 'glibc.malloc.hugetlb' tunable: the value
'2' means to use huge pages directly with the system default size,
while a positive value means and specific page size that is matched
against the supported ones by the system.
Currently only memory allocated on sysmalloc() is handled, the arenas
still uses the default system page size.
To test is a new rule is added tests-malloc-hugetlb2, which run the
addes tests with the required GLIBC_TUNABLE setting. On systems without
a reserved huge pages pool, is just stress the mmap(MAP_HUGETLB)
allocation failure. To improve test coverage it is required to create
a pool with some allocated pages.
Checked on x86_64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
To increase effectiveness with Transparent Huge Page with madvise, the
large page size is use instead page size for sbrk increment for the
main arena.
Checked on x86_64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
Linux Transparent Huge Pages (THP) current supports three different
states: 'never', 'madvise', and 'always'. The 'never' is
self-explanatory and 'always' will enable THP for all anonymous
pages. However, 'madvise' is still the default for some system and
for such case THP will be only used if the memory range is explicity
advertise by the program through a madvise(MADV_HUGEPAGE) call.
To enable it a new tunable is provided, 'glibc.malloc.hugetlb',
where setting to a value diffent than 0 enables the madvise call.
This patch issues the madvise(MADV_HUGEPAGE) call after a successful
mmap() call at sysmalloc() with sizes larger than the default huge
page size. The madvise() call is disable is system does not support
THP or if it has the mode set to "never" and on Linux only support
one page size for THP, even if the architecture supports multiple
sizes.
To test is a new rule is added tests-malloc-hugetlb1, which run the
addes tests with the required GLIBC_TUNABLE setting.
Checked on x86_64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
A local register variable is merely a compiler hint, and so not
appropriate in this context. Move the global register variable into
<thread_pointer.h> and include it from <tls.h>, as there can only
be one global definition for one particular register.
Fixes commit 8dbeb0561e
("nptl: Add <thread_pointer.h> for defining __thread_pointer").
Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Raphael M Zinsly <rzinsly@linux.ibm.com>
Add <tst-file-align.h> to support target specific ALIGN for variable
alignment test:
1. Alpha: Use 0x10000.
2. MicroBlaze and Nios II: Use 0x8000.
3. All others: Use 0x200000.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
On Linux/x86-64, for elf/tst-align3, we now get
munmap(0x7f88f9401000, 1126424) = 0
instead of
munmap(0x7f1615200018, 544768) = -1 EINVAL (Invalid argument)
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The default has to change eventually, and there are no known failures
that require a delay.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Improve reproducibility:
Do not put any #line preprocessor commands in bison generated files.
These lines contain absolute paths containing file locations on
the host build machine.
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The glibc internal NSS functions should always load NSS modules from
the system. For testing purpose, disable DT_RUNPATH on NSS tests so
that the glibc internal NSS functions can load testing NSS modules
via DT_RPATH.
This partially fixes BZ #28455.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The macro TAYLOR_SIN adds the term `-0.5*da*a^2 + da` in hopes
of regaining some precision as a function of da. However the
comment says we add the term `-0.5*da*a^2 + 0.5*da` which is
different. This fix updates the comment to reflect the
code and also simplifies the calculation by replacing `a` with `x`
because they always have the same value.
Signed-off-by: Akila Welihinda <akilawelihinda@ucla.edu>
Reviewed-by: Paul Zimmermann <Paul.Zimmermann@inria.fr>
The error handling is moved to sysdeps/ieee754 version with no SVID
support. The compatibility symbol versions still use the wrapper with
SVID error handling around the new code. There is no new symbol version
nor compatibility code on !LIBM_SVID_COMPAT targets (e.g. riscv).
Only ia64 is unchanged, since it still uses the arch specific
__libm_error_region on its implementation.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
The generic implementation is shows only slight worse performance:
POWER10 reciprocal-throughput latency
master 8.28478 13.7253
new hypot 7.21945 13.1933
POWER9 reciprocal-throughput latency
master 13.4024 14.0967
new hypot 14.8479 15.8061
POWER8 reciprocal-throughput latency
master 15.5767 16.8885
new hypot 16.5371 18.4057
One way to improve might to make gcc generate xsmaxdp/xsmindp for
fmax/fmin (it onl does for -ffast-math, clang does for default
options).
Checked on powerpc64-linux-gnu (power8) and powerpc64le-linux-gnu
(power9).
The generic hypotf is slight slower, mostly due the tricks the assembly
does to optimize the isinf/isnan/issignaling. The generic hypot is way
slower, since the optimized implementation uses the i386 default
excessive precision to issue the operation directly. A similar
implementation is provided instead of using the generic implementation:
Checked on i686-linux-gnu.
This implementation is based on 'An Improved Algorithm for hypot(a,b)'
by Carlos F. Borges [1] using the MyHypot3 with the following changes:
- Handle qNaN and sNaN.
- Tune the 'widely varying operands' to avoid spurious underflow
due the multiplication and fix the return value for upwards
rounding mode.
- Handle required underflow exception for subnormal results.
The main advantage of the new algorithm is its precision. With a
random 1e9 input pairs in the range of [LDBL_MIN, LDBL_MAX], glibc
current implementation shows around 0.05% results with an error of
1 ulp (453266 results) while the new implementation only shows
0.0001% of total (1280).
Checked on aarch64-linux-gnu and x86_64-linux-gnu.
[1] https://arxiv.org/pdf/1904.09481.pdf
This implementation is based on 'An Improved Algorithm for hypot(a,b)'
by Carlos F. Borges [1] using the MyHypot3 with the following changes:
- Handle qNaN and sNaN.
- Tune the 'widely varying operands' to avoid spurious underflow
due the multiplication and fix the return value for upwards
rounding mode.
- Handle required underflow exception for subnormal results.
The main advantage of the new algorithm is its precision. With a
random 1e8 input pairs in the range of [LDBL_MIN, LDBL_MAX], glibc
current implementation shows around 0.02% results with an error of
1 ulp (23158 results) while the new implementation only shows
0.0001% of total (111).
[1] https://arxiv.org/pdf/1904.09481.pdf
Improve hypot performance significantly by using fma when available. The
fma version has twice the throughput of the previous version and 70% of
the latency. The non-fma version has 30% higher throughput and 10%
higher latency.
Max ULP error is 0.949 with fma and 0.792 without fma.
Passes GLIBC testsuite.
This implementation is based on the 'An Improved Algorithm for
hypot(a,b)' by Carlos F. Borges [1] using the MyHypot3 with the
following changes:
- Handle qNaN and sNaN.
- Tune the 'widely varying operands' to avoid spurious underflow
due the multiplication and fix the return value for upwards
rounding mode.
- Handle required underflow exception for denormal results.
The main advantage of the new algorithm is its precision: with a
random 1e9 input pairs in the range of [DBL_MIN, DBL_MAX], glibc
current implementation shows around 0.34% results with an error of
1 ulp (3424869 results) while the new implementation only shows
0.002% of total (18851).
The performance result are also only slight worse than current
implementation. On x86_64 (Ryzen 5900X) with gcc 12:
Before:
"hypot": {
"workload-random": {
"duration": 3.73319e+09,
"iterations": 1.12e+08,
"reciprocal-throughput": 22.8737,
"latency": 43.7904,
"max-throughput": 4.37184e+07,
"min-throughput": 2.28361e+07
}
}
After:
"hypot": {
"workload-random": {
"duration": 3.7597e+09,
"iterations": 9.8e+07,
"reciprocal-throughput": 23.7547,
"latency": 52.9739,
"max-throughput": 4.2097e+07,
"min-throughput": 1.88772e+07
}
}
Co-Authored-By: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
[1] https://arxiv.org/pdf/1904.09481.pdf
Use a more optimized comparison for check for NaN and infinite and
add an inlined issignaling implementation for float. With gcc it
results in 2 FP comparisons.
The file Copyright is also changed to use GPL, the implementation was
completely changed by 7c10fd3515 to use double precision instead of
scaling and this change removes all the GET_FLOAT_WORD usage.
Checked on x86_64-linux-gnu.
Replace non-UTF-8 and non-ASCII characters in comments with their UTF-8
equivalents so that files don't end up with mixed encodings. With this,
all files (except tests that actually test different encodings) have a
single encoding.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Build glibc programs and tests as PIE by default and enable static-pie
automatically if the architecture and toolchain supports it.
Also add a new configuration option --disable-default-pie to prevent
building programs as PIE.
Only the following architectures now have PIE disabled by default
because they do not work at the moment. hppa, ia64, alpha and csky
don't work because the linker is unable to handle a pcrel relocation
generated from PIE objects. The microblaze compiler is currently
failing with an ICE. GNU hurd tries to enable static-pie, which does
not work and hence fails. All these targets have default PIE disabled
at the moment and I have left it to the target maintainers to enable PIE
on their targets.
build-many-glibcs runs clean for all targets. I also tested x86_64 on
Fedora and Ubuntu, to verify that the default build as well as
--disable-default-pie work as expected with both system toolchains.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
