Since commit a3cc4f48e9 ("Remove
--as-needed configure test."), --as-needed support is no longer
optional.
The macros are not much shorter and do not provide documentary
value, either, so this commit removes them.
Since the commit
commit 86a0f56158
Author: Rajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com>
Date: Thu Jun 28 13:57:50 2018 +0530
ldbl-128ibm-compat: Introduce ieee128 symbols
IEEE long double versions of strfroml, strtold, and wcstold have been
prepared, but not exposed (which will only happen when the full support
for IEEE long double is complete). This patch adds tests for these
functions in both IBM and IEEE long double mode.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
This patch adds elementary tests to check that strfmon and strfmon_l
correctly evaluate long double values with IBM Extended Precision and
IEEE binary128 format.
Tested for powerpc64le.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
Similarly to what has been done for printf-like functions, more
specifically to the internal implementation in __vfprintf_internal, this
patch extends __vstrfmon_l_internal to deal with long double values with
binary128 format (as a third format option and reusing the float128
implementation).
Tested for powerpc64le, powerpc64, x86_64, and with build-many-glibcs.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
Several commits to the ldbl-128ibm-compat directory added new files
where the URL in the copyright notice pointed to an http, rather than to
an https, address. This happened because I copied the notices before
commit ID 5a82c74822. This trivial patch fixes this issue.
This commit adds missing skip_ifunc checks to aarch64, arm, i386,
sparc, and x86_64. A new test case ensures that IRELATIVE IFUNC
resolvers do not run in various diagnostic modes of the dynamic
loader.
Reviewed-By: Szabolcs Nagy <szabolcs.nagy@arm.com>
ld.so symbols to be overriden by libc need to be extern to really get
overriden. __access happens to have never been exposed, putting it to
GLIBC_PRIVATE.
ld.so symbols to be overriden by libc need to be extern to really get
overriden. __getcwd happens to have never been exposed, putting it to
GLIBC_PRIVATE.
This patch updates the kernel version in the test tst-mman-consts.py
to 5.4. (There are no new constants covered by this test in 5.4 that
need any other header changes.)
Tested with build-many-glibcs.py.
Linux 5.4 changes the SOMAXCONN value from 128 to 4096 (this isn't in
a uapi header; various constants related to the kernel/userspace
interface, including this one, are in the non-uapi linux/socket.h
header).
This patch increases the value in glibc. As I understand it, it is
safe to use a higher value even with older kernels (the kernel will
simply adjust the value passed to listen to be no more than the value
supported in the kernel), and SOMAXCONN is actually only a default for
a sysctl value in the kernel that can be changed at runtime. So I
think updating the value in glibc is a reasonable and safe thing to
do.
Tested for x86_64.
This patch updates syscall-names.list for Linux 5.4. There are no new
syscalls, so this is just a matter of updating the version number
listed in the file.
Tested with build-many-glibcs.py.
Linux 5.4 adds constants MADV_COLD and MADV_PAGEOUT (defined with the
same values on all architectures). This patch adds them to
bits/mman-linux.h.
Tested for x86_64.
This change splits the scope and TLS slotinfo updates in dlopen into
two parts: one to resize the data structures, and one to actually apply
the update. The call to add_to_global_resize in dl_open_worker is moved
before the demarcation point at which no further memory allocations are
allowed.
_dl_add_to_slotinfo is adjusted to make the list update optional. There
is some optimization possibility here because we could grow the slotinfo
list of arrays in a single call, one the largest TLS modid is known.
This commit does not fix the fatal meory allocation failure in
_dl_update_slotinfo. Ideally, this error during dlopen should be
recoverable.
The update order of scopes and TLS data structures is retained, although
it appears to be more correct to fully initialize TLS first, and then
expose symbols in the newly loaded objects via the scope update.
Tested on x86_64-linux-gnu.
Change-Id: I240c58387dabda3ca1bcab48b02115175fa83d6c
The call to add_to_global in dl_open_worker happens after running ELF
constructors for new objects. At this point, proper recovery from
malloc failure would be quite complicated: We would have to run the
ELF destructors and close all opened objects, something that we
currently do not do.
Instead, this change splits add_to_global into two phases,
add_to_global_resize (which can raise an exception, called before ELF
constructors run), and add_to_global_update (which cannot, called
after ELF constructors). A complication arises due to recursive
dlopen: After the inner dlopen consumes some space, the pre-allocation
in the outer dlopen may no longer be sufficient. A new member in the
namespace structure, _ns_global_scope_pending_adds keeps track of the
maximum number of objects that need to be added to the global scope.
This enables the inner add_to_global_resize call to take into account
the needs of an outer dlopen.
Most code in the dynamic linker assumes that the number of global
scope entries fits into an unsigned int (matching the r_nlist member
of struct r_scop_elem). Therefore, change the type of
_ns_global_scope_alloc to unsigned int (from size_t), and add overflow
checks.
Change-Id: Ie08e2f318510d5a6a4bcb1c315f46791b5b77524
Similarly to __vfprintf_internal and __vfscanf_internal, the internal
implementation of syslog functions (__vsyslog_internal) takes a
'mode_flags' parameter used to select the format of long double
parameters. This patch adds variants of the syslog functions that set
'mode_flags' to PRINTF_LDBL_USES_FLOAT128, thus enabling the correct
printing of long double values on powerpc64le, when long double has IEEE
binary128 format (-mabi=ieeelongdouble).
Tested for powerpc64le.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Joseph Myers <joseph@codesourcery.com>
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
Similarly to the functions from the *printf family, this patch adds
implementations for __obstack_*printf* functions that set the
'mode_flags' parameter to PRINTF_LDBL_USES_FLOAT128, before making calls
to __vfprintf_internal (indirectly through __obstack_vprintf_internal).
Tested for powerpc64le.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
Commit IDs 9771e6cb51 and 7597b0c7f7 added tests for the functions
from err.h and error.h that can take long double parameters.
Afterwards, commit ID f0eaf86276 reused them on architectures that
changed the long double format from the same as double to something else
(i.e.: architectures that imply ldbl-opt). This patch reuses it again
for IEEE long double on powerpc64le.
Tested for powerpc64le.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
Use the recently added, internal functions, __error_at_line_internal and
__error_internal, to provide error.h functions that can take long double
arguments with IEEE binary128 format on platforms where long double can
also take double format or some non-IEEE format (currently, this means
powerpc64le).
Tested for powerpc64le.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
Use the recently added, internal functions, __vwarnx_internal and
__vwarn_internal, to provide err.h functions that can take long double
arguments with IEEE binary128 format on platforms where long double can
also take double format or some non-IEEE format (currently, this means
powerpc64le).
Tested for powerpc64le.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
Use the recently added, internal functions, __argp_error_internal and
__argp_failure_internal, to provide argp_error and argp_failure that can
take long double arguments with IEEE binary128 format on platforms where
long double can also take double format or some non-IEEE format
(currently, this means powerpc64le).
Tested for powerpc64le.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
This patch removes the arch-specific atomic instruction, relying on
compiler builtins. The __sparc32_atomic_locks support is removed
and a configure check is added to check if compiler uses libatomic
to implement CAS.
It also removes the sparc specific sem_* and pthread_barrier_*
implementations. It in turn allows buidling against a LEON3/LEON4
sparcv8 target, although it will still be incompatible with generic
sparcv9.
Checked on sparcv9-linux-gnu and sparc64-linux-gnu. I also checked
with build against sparcv8-linux-gnu with -mcpu=leon3.
Tested-by: Andreas Larsson <andreas@gaisler.com>
The patch is straighforward:
- The sparc32 v8 implementations are moved as the generic ones.
- A configure test is added to check for either __sparc_v8__ or
__sparc_v9__.
- The triple names are simplified and sparc implies sparcv8.
The idea is to keep support on sparcv8 architectures that does support
CAS instructions, such as LEON3/LEON4.
Checked on a sparcv9-linux-gnu and sparc64-linux-gnu.
Tested-by: Andreas Larsson <andreas@gaisler.com>
If the specified needle crosses a page-boundary, the s390-z15 ifunc variant of
strstr truncates the needle which results in invalid results.
This is fixed by loading the needle beyond the page boundary to v18 instead of v16.
The bug is sometimes observable in test-strstr.c in check1 and check2 as the
haystack and needle is stored on stack. Thus the needle can be on a page boundary.
check2 is now extended to test haystack / needles located on stack, at end of page
and on two pages.
This bug was introduced with commit 6f47401bd5
("S390: Add arch13 strstr ifunc variant.") and is already released in glibc 2.30.
The nptl: Add struct_mutex.h added a wrong initializer for
architectures that uses the generic struct_mutex.h.
Checked on sparcv9-linux-gnu (where I noted the issue with the
nptl/tst-initializers1*).
Now that both pthread_mutex_t and pthread_rwlock_t static initializer
are parametrized in their own headers HPPA pthread.h is identical to
generic nptl one.
Checked on hppa-linux-gnu.
Change-Id: I236cfceb5656cfcce42c9e367a4f6803e2abd88b
This patch adds a default pthread-offsets.h based on default
thread definitions from struct_mutex.h and struct_rwlock.h.
The idea is to simplify new ports inclusion.
Checked with a build on affected abis.
Change-Id: I7785a9581e651feb80d1413b9e03b5ac0452668a
This patch adds a default pthreadtypes-arch.h, the idea is to simpify
new ports inclusion and an override is required only if the architecture
adds some arch-specific extensions or requirement.
The default values on the new generic header are based on current
architecture define value and they are not optimal compared to current
code requirements as below.
- On 64 bits __SIZEOF_PTHREAD_BARRIER_T is defined as 32 while is
sizeof (struct pthread_barrier) is 20 bytes.
- On 32 bits __SIZEOF_PTHREAD_ATTR_T is defined as 36 while
sizeof (struct pthread_attr) is 32.
The default values are not changed so the generic header could be
used by some architectures.
Checked with a build on affected abis.
Change-Id: Ie0cd586258a2650f715c1af0c9fe4e7063b0409a
This patch adds a new generic __pthread_rwlock_arch_t definition meant
to be used by new ports. Its layout mimics the current usage on some
64 bits ports and it allows some ports to use the generic definition.
The arch __pthread_rwlock_arch_t definition is moved from
pthreadtypes-arch.h to another arch-specific header (struct_rwlock.h).
Also the static intialization macro for pthread_rwlock_t is set to use
an arch defined on (__PTHREAD_RWLOCK_INITIALIZER) which simplifies its
implementation.
The default pthread_rwlock_t layout differs from current ports with:
1. Internal layout is the same for 32 bits and 64 bits.
2. Internal flag is an unsigned short so it should not required
additional padding to align for word boundary (if it is the case
for the ABI).
Checked with a build on affected abis.
Change-Id: I776a6a986c23199929d28a3dcd30272db21cd1d0
The current way of defining the common mutex definition for POSIX and
C11 on pthreadtypes-arch.h (added by commit 06be6368da) is
not really the best options for newer ports. It requires define some
misleading flags that should be always defined as 0
(__PTHREAD_COMPAT_PADDING_MID and __PTHREAD_COMPAT_PADDING_END), it
exposes options used solely for linuxthreads compat mode
(__PTHREAD_MUTEX_USE_UNION and __PTHREAD_MUTEX_NUSERS_AFTER_KIND), and
requires newer ports to explicit define them (adding more boilerplate
code).
This patch adds a new default __pthread_mutex_s definition meant to
be used by newer ports. Its layout mimics the current usage on both
32 and 64 bits ports and it allows most ports to use the generic
definition. Only ports that use some arch-specific definition (such
as hardware lock-elision or linuxthreads compat) requires specific
headers.
For 32 bit, the generic definitions mimic the other 32-bit ports
of using an union to define the fields uses on adaptive and robust
mutexes (thus not allowing both usage at same time) and by using a
single linked-list for robust mutexes. Both decisions seemed to
follow what recent ports have done and make the resulting
pthread_mutex_t/mtx_t object smaller.
Also the static intialization macro for pthread_mutex_t is set to use
a macro __PTHREAD_MUTEX_INITIALIZER where the architecture can redefine
in its struct_mutex.h if it requires additional fields to be
initialized.
Checked with a build on affected abis.
Change-Id: I30a22c3e3497805fd6e52994c5925897cffcfe13
The new rwlock implementation added by cc25c8b4c1 (2.25) removed
support for lock-elision. This patch removes remaining the
arch-specific unused definitions.
Checked with a build against all affected ABIs.
Change-Id: I5dec8af50e3cd56d7351c52ceff4aa3771b53cd6
This patch new build tests to check for internal fields offsets for
internal pthread_rwlock_t definition. Althoug the '__data.__flags'
field layout should be preserved due static initializators, the patch
also adds tests for the futexes that may be used in a shared memory
(although using different libc version in such scenario is not really
supported).
Checked with a build against all affected ABIs.
Change-Id: Iccc103d557de13d17e4a3f59a0cad2f4a640c148
The offsets of pthread_mutex_t __data.__nusers, __data.__spins,
__data.elision, __data.list are not required to be constant over
the releases. Only the __data.__kind is used for static
initializers.
This patch also adds an additional size check for __data.__kind.
Checked with a build against affected ABIs.
Change-Id: I7a4e48cc91b4c4ada57e9a5d1b151fb702bfaa9f
It adds the missing Implies for armv7, armv6, armv6t2 after the
commit 1673ba87fe. Without the Implies a build with the
compiler targeting the aforementioned architecture does not select
the arch-specific optimization including the ifunc selectors.
I checked with a build against armv5, armv6, armv6t2, armv7, and
armv7-neon for both LE and BE. For armv6 and armv7 I also checked
that both sysdeps selection and the resulting implementation built
is the expected ones.
Similarly to what was done for regular character scanning functions,
this patch uses the new mode mask, SCANF_LDBL_USES_FLOAT128, in the
'mode' argument of the wide characters scanning function,
__vfwscanf_internal (which is also extended to support scanning
floating-point values with IEEE binary128, by redirecting calls to
__wcstold_internal to __wcstof128_internal).
Tested for powerpc64le.
Reviewed-By: Paul E. Murphy <murphyp@linux.ibm.com>
The 'mode' argument to __vfscanf_internal allows the selection of the
long double format for all long double arguments requested by the format
string. Currently, there are two possibilities: long double with the
same format as double or long double as something else. The 'something
else' format varies between architectures, and on powerpc64le, it means
IBM Extended Precision format.
In preparation for the third option of long double format on
powerpc64le, this patch uses the new mode mask,
SCANF_LDBL_USES_FLOAT128, which tells __vfscanf_internal to call
__strtof128_internal, instead of __strtold_internal, and save the output
into a _Float128 variable.
Tested for powerpc64le.
Reviewed-By: Paul E. Murphy <murphyp@linux.ibm.com>
The format string can request positional parameters, instead of relying
on the order in which they appear as arguments. Since this has an
effect on how the type of each argument is determined, this patch
extends the test cases to use positional parameters with mixed double
and long double types, to verify that the IEEE long double
implementations of *printf work correctly in this scenario.
Tested for powerpc64le.
Reviewed-By: Paul E. Murphy <murphyp@linux.ibm.com>
A single format string can take double and long double parameters at the
same time. Internally, these parameters are routed to the same
function, which correctly reads them and calls the underlying functions
responsible for the actual conversion to string. This patch adds a new
case to test this scenario.
Tested for powerpc64le.
Reviewed-By: Paul E. Murphy <murphyp@linux.ibm.com>
Similarly to what was done for the regular character, fortified printing
functions, this patch combines the mode masks PRINTF_LDBL_USES_FLOAT128
and PRINTF_FORTIFY to provide wide character versions of fortified
printf functions. It also adds two flavors of test cases: one that
explicitly calls the fortified functions, and another that reuses the
non-fortified test, but defining _FORTIFY_SOURCE as 2. The first
guarantees that the implementations are actually being tested
(independently of what's in bits/wchar2.h), whereas the second
guarantees that the redirections calls the correct function in the IBM
and IEEE long double cases.
Tested for powerpc64le.
Reviewed-By: Paul E. Murphy <murphyp@linux.ibm.com>
Since the introduction of internal functions with explicit flags for the
printf family of functions, the 'mode' parameter can be used to select
which format long double parameters have (with the mode flags:
PRINTF_LDBL_IS_DBL and PRINTF_LDBL_USES_FLOAT128), as well as to select
whether to check for overflows (mode flag: PRINTF_FORTIFY).
This patch combines PRINTF_LDBL_USES_FLOAT128 and PRINTF_FORTIFY to
provide the IEEE binary128 version of printf-like function for platforms
where long double can take this format, in addition to the double format
and to some non-ieee format (currently, this means powerpc64le).
There are two flavors of test cases provided with this patch: one that
explicitly calls the fortified functions, for instance __asprintf_chk,
and another that reuses the non-fortified test, but defining
_FORTIFY_SOURCE as 2. The first guarantees that the implementations are
actually being tested (in bits/stdio2.h, vprintf gets redirected to
__vfprintf_chk, which would leave __vprintf_chk untested), whereas the
second guarantees that the redirections calls the correct function in
the IBM and IEEE long double cases.
Tested for powerpc64le.
Reviewed-By: Paul E. Murphy <murphyp@linux.ibm.com>
Similarly to what was done for regular character printing functions,
this patch uses the new mode mask, PRINTF_LDBL_USES_FLOAT128, in the
'mode' argument of the wide characters printing function,
__vfwprintf_internal (which is also extended to support printing
floating-point values with IEEE binary128, by saving floating-point
values into variables of type __float128 and adjusting the parameters to
__printf_fp and __printf_fphex as if it was a call from a wide-character
version of strfromf128 (even though such version does not exist)).
Tested for powerpc64le.
Reviewed-By: Paul E. Murphy <murphyp@linux.ibm.com>
The 'mode' argument to __vfprintf_internal allows the selection of the
long double format for all long double arguments requested by the format
string. Currently, there are two possibilities: long double with the
same format as double or long double as something else. The 'something
else' format varies between architectures, and on powerpc64le, it means
IBM Extended Precision format.
In preparation for the third option of long double format on
powerpc64le, this patch uses the new mode mask,
PRINTF_LDBL_USES_FLOAT128, which tells __vfprintf_internal to save the
floating-point values into variables of type __float128 and adjusts the
parameters to __printf_fp and __printf_fphex as if it was a call from
strfromf128.
Many files from the stdio-common, wcsmbs, argp, misc, and libio
directories will have IEEE binary128 counterparts. Setting the correct
compiler options to these files (original and counterparts) would
produce a large amount of repetitive Makefile rules. To avoid this
repetition, this patch adds a Makefile routine that iterates over the
files adding or removing the appropriate flags.
Tested for powerpc64le.
Reviewed-By: Florian Weimer <fweimer@redhat.com>
Reviewed-By: Joseph Myers <joseph@codesourcery.com>
Reviewed-By: Paul E. Murphy <murphyp@linux.ibm.com>
The generic pselect implementation has the very specific race condition
that motived the creation of the pselect syscall (no atomicity in
signal mask set/reset). Using it as generic implementation is
counterproductive Also currently only microblaze uses it as fallback
when used on kernel prior 3.15.
This patch moves the generic implementation to a microblaze specific
one, sets the generic internal as a ENOSYS, and cleanups the Linux
generic implementation.
The microblaze implementation mimics the previous Linux generic one,
where it either uses pselect6 directly if __ASSUME_PSELECT or a
first try pselect6 then the fallback otherwise.
Checked on x86_64-linux-gnu and microblaze-linux-gnu.
Very recent commit 854e91bf6b enabled
inline of issignalingf() in general (__issignalingf in include/math.h).
There is another implementation for an inline use of issignalingf
(issignalingf_inline in sysdeps/ieee754/flt-32/math_config.h)
which could instead make use of the new enablement.
Replace the use of issignalingf_inline with __issignaling. Using
issignaling (instead of __issignalingf) will allow future enhancements
to the type-generic implementation, issignaling, to be automatically
adopted.
The implementations are slightly different, and compile to slightly
different code, but I measured no significant performance difference.
The second implementation was brought to my attention by:
Suggested-by: Joseph Myers <joseph@codesourcery.com>
Reviewed-by: Joseph Myers <joseph@codesourcery.com>
This causes issues when using clang with -frewrite-includes to e.g.,
submit the translation unit to a distributed compiler.
In my case, I was building Firefox using sccache.
See [1] for a reduced test-case since I initially thought this was a
clang bug, and [2] for more context.
Apparently doing this is invalid C++ per [cpp.cond], which mentions [3]:
> The #ifdef and #ifndef directives, and the defined conditional
> inclusion operator, shall treat __has_include and __has_cpp_attribute
> as if they were the names of defined macros. The identifiers
> __has_include and __has_cpp_attribute shall not appear in any context
> not mentioned in this subclause.
[1]: https://bugs.llvm.org/show_bug.cgi?id=43982
[2]: https://bugs.llvm.org/show_bug.cgi?id=37990
[3]: http://eel.is/c++draft/cpp.cond#7.sentence-2
Change-Id: Id4b8ee19176a9e4624b533087ba870c418f27e60
issignalingf is a very small function used in some areas where
better performance (and smaller code) might be helpful.
Create inline implementation for issignalingf.
Reviewed-by: Joseph Myers <joseph@codesourcery.com>
This will allow changes in dependency processing during non-lazy
binding, for more precise processing of NODELETE objects: During
initial relocation in dlopen, the fate of NODELETE objects is still
unclear, so objects which are depended upon by NODELETE objects
cannot immediately be marked as NODELETE.
Change-Id: Ic7b94a3f7c4719a00ca8e6018088567824da0658
In some cases, it is necessary to introduce noexcept regions
where raised dynamic loader exceptions (e.g., from lazy binding)
are fatal, despite being nested in a code region with an active
exception handler. This change enhances _dl_catch_exception with
to provide such a capability. The existing function is reused,
so that it is not necessary to introduce yet another function with
a similar purpose.
Change-Id: Iec1bf642ff95a349fdde8040e9baf851ac7b8904
The trampoline code should really be rewritten in assembler because
this is all very undefined at the C level.
Change-Id: Ided58244ca0ee48892519faac5ac222a4e02dec4
l_audit ends up as an internal array with _rtld_global, and GCC 10
warns about this.
This commit does not change the layout of _rtld_global, so it is
suitable for backporting. Future changes could allocate more of the
audit state dynamically and remove it from always-allocated data
structures, to optimize the common case of inactive auditing.
Change-Id: Ic911100730f9124d4ea977ead8e13cee64b84d45
To improve GCC 10 compatibility, it is necessary to remove the l_audit
zero-length array from the end of struct link_map. In preparation of
that, this commit introduces an accessor function for the audit state,
so that it is possible to change the representation of the audit state
without adjusting the code that accesses it.
Tested on x86_64-linux-gnu. Built on i686-gnu.
Change-Id: Id815673c29950fc011ae5301d7cde12624f658df
Increase the upper bound on medium cases from 96 to 128 bytes.
Now, up to 128 bytes are copied unrolled.
Increase the upper bound on small cases from 16 to 32 bytes so that
copies of 17-32 bytes are not impacted by the larger medium case.
Benchmarking:
The attached figures show relative timing difference with respect
to 'memcpy_generic', which is the existing implementation.
'memcpy_med_128' denotes the the version of memcpy_generic with
only the medium case enlarged. The 'memcpy_med_128_small_32' numbers
are for the version of memcpy_generic submitted in this patch, which
has both medium and small cases enlarged. The figures were generated
using the script from:
https://www.sourceware.org/ml/libc-alpha/2019-10/msg00563.html
Depending on the platform, the performance improvement in the
bench-memcpy-random.c benchmark ranges from 6% to 20% between
the original and final version of memcpy.S
Tested against GLIBC testsuite and randomized tests.
GCC 10 will warn about subscribing inner length zero arrays. Use a GCC
extension in csu/libc-tls.c to allocate space for the static_slotinfo
variable. Adjust nptl_db so that the type description machinery does
not attempt to determine the size of the flexible array member slotinfo.
Change-Id: I51be146a7857186a4ede0bb40b332509487bdde8
This patch fixes the time64 support (added by 2e44b10b42) where it
misses the remaining argument updated if __NR_clock_nanosleep
returns EINTR.
Checked on i686-linux-gnu on 4.15 kernel (no time64 support) and
on 5.3 kernel (with time64 support).
Reviewed-by: Alistair Francis <alistair23@gmail.com>
This patch provides new __ppoll64 explicit 64 bit function for handling polling
events (with struct timespec specified timeout) for a set of file descriptors.
Moreover, a 32 bit version - __ppoll has been refactored to internally use
__ppoll64.
The __ppoll is now supposed to be used on systems still supporting 32 bit time
(__TIMESIZE != 64) - hence the necessary conversion to 64 bit struct
__timespec64.
The new ppoll_time64 syscall available from Linux 5.1+ has been used, when
applicable.
The Linux kernel checks if passed tv_nsec value overflows, so there is no need
to repeat it in the glibc.
When ppoll syscall on systems supporting 32 bit time ABI is used, the check is
performed if passed data (which may have 64 bit tv_sec) fits into 32 bit range.
Build tests:
- The code has been tested on x86_64/x86 (native compilation):
make PARALLELMFLAGS="-j8" && make check PARALLELMFLAGS="-j8" && \\
make xcheck PARALLELMFLAGS="-j8"
- The glibc has been build tested (make PARALLELMFLAGS="-j8") for
x86 (i386), x86_64-x32, and armv7
Run-time tests:
- Run specific tests on ARM/x86 32bit systems (qemu):
https://github.com/lmajewski/meta-y2038 and run tests:
https://github.com/lmajewski/y2038-tests/commits/master
- Use of cross-test-ssh.sh for ARM (armv7):
make PARALLELMFLAGS="-j8" test-wrapper='./cross-test-ssh.sh root@192.168.7.2' xcheck
Linux kernel, headers and minimal kernel version for glibc build test
matrix:
- Linux v5.1 (with ppoll_time64) and glibc build with v5.1 as
minimal kernel version (--enable-kernel="5.1.0")
The __ASSUME_TIME64_SYSCALLS flag defined.
- Linux v5.1 and default minimal kernel version
The __ASSUME_TIME64_SYSCALLS not defined, but kernel supports ppoll_time64
syscall.
- Linux v4.19 (no ppoll_time64 support) with default minimal kernel version for
contemporary glibc
This kernel doesn't support ppoll_time64 syscall, so the fallback to ppoll is
tested.
Above tests were performed with Y2038 redirection applied as well as without
(so the __TIMESIZE != 64 execution path is checked as well).
No regressions were observed.
And related tests. These tests create a thread for each core, so
they may fail due to address space limitations with the default
stack size.
Change-Id: Ieef44a7731f58d3b7d6638cce4ccd31126647551
The clock_nanosleep syscall is not supported on newer 32-bit platforms (such
as RV32). To fix this issue let's use clock_nanosleep_time64 if it is
avaliable.
It just contains duplicated defitions provided by other generic
nptl headers.
Checked with run-built-tests=no against hppa-linux-gnu.
Change-Id: I95f55d5b7b7ae528c81cd2394d57ce92398189bf
Adds the __libpthread_version_placeholder symbol with the same version
of nanosleep/__nanosleep that was removed by 79a547b162 and that
is not provided by other symbols.
They cause a check-localplt failure after commit f9a7554009.
Fixes: f9a7554009
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Change-Id: I37bc20f3449b9e358f32879ed231720c969965b4
The generic version is straightforward. For Hurd, its nanosleep
implementation is moved to clock_nanosleep with adjustments from
generic unix implementation.
The generic clock_nanosleep unix version is also removed since
it calls nanosleep.
Checked on x86_64-linux-gnu and powerpc64le-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Checked on x86_64-linux-gnu and powerpc64le-linux-gnu. I also checked
the libpthread.so .gnu.version_d entries for every ABI affected and
all of them contains the required versions (including for architectures
which exports __nanosleep with a different version).
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The s390 gcc bug https://gcc.gnu.org/bugzilla/show_bug.cgi?id=77918
"S390: Floating point comparisons don't raise invalid for unordered operands."
is fixed with gcc 10. Thus we conditionally set FIX_COMPARE_INVALID
to 0 or 1.
Nothing defines CALL_PSELECT6 in the current tree, so remove it.
Tested with:
- make PARALLELMFLAGS="-j8" && make xcheck PARALLELMFLAGS="-j8" (x86_64)
- scripts/build-many-glibcs.py
The hppa architecture requires strict alignment for loads and stores.
As a result, the minimum stack alignment that will work is 8 bytes.
This patch adjusts __clone() to align the stack argument passed to it.
It also adjusts slightly some formatting.
This fixes the nptl/tst-tls1 test.
This patch provides new __futimens64 explicit 64 bit function for
setting access and modification time of file (by using its file descriptor).
Moreover, a 32 bit version - __futimens has been refactored to internally use
__futimens64.
The __futimens is now supposed to be used on systems still supporting
32 bit time (__TIMESIZE != 64) - hence the necessary conversions to 64 bit
struct __timespec64.
When pointer to struct __timespec64 is NULL - the file access and modification
time is set to the current one (by the kernel) and no conversions from struct
timespec to __timespec64 are performed.
The __futimens64 reuses __utimensat64_helper defined for __utimensat64.
The test procedure for __futimens64 is the same as for __utimensat64 conversion
patch.
This patch provides new __utimensat64 explicit 64 bit function for
setting access and modification time of a file. Moreover, a 32 bit version
- __utimensat has been refactored to internally use __utimensat64.
The __utimensat is now supposed to be used on systems still supporting
32 bit time (__TIMESIZE != 64) - hence the necessary conversions to 64 bit
struct __timespec64.
When pointer to struct __timespec64 is NULL - the file access and modification
time is set to the current one and no conversions from struct timespec to
__timespec64 are performed.
The new utimensat_time64 syscall available from Linux 5.1+ has been used,
when applicable.
The new helper function - __utimensat64_helper - has been introduced to
facilitate code re-usage on function providing futimens syscall handling.
The Linux kernel checks if passed tv_nsec value overflows, so there is no
need to repeat it in glibc.
When utimensat syscall on systems supporting 32 bit time ABI is used,
the check is performed if passed data (which may have 64 bit tv_sec) fits
into 32 bit range.
Build tests:
- The code has been tested on x86_64/x86 (native compilation):
make PARALLELMFLAGS="-j8" && make xcheck PARALLELMFLAGS="-j8"
- The glibc has been build tested (make PARALLELMFLAGS="-j8") for
x86 (i386), x86_64-x32, and armv7
Run-time tests:
- Run specific tests on ARM/x86 32bit systems (qemu):
https://github.com/lmajewski/meta-y2038 and run tests:
https://github.com/lmajewski/y2038-tests/commits/master
- Use of cross-test-ssh.sh for ARM (armv7):
make PARALLELMFLAGS="-j8" test-wrapper='./cross-test-ssh.sh root@192.168.7.2' xcheck
Linux kernel, headers and minimal kernel version for glibc build test
matrix:
- Linux v5.1 (with utimensat_time64) and glibc build with v5.1 as
minimal kernel version (--enable-kernel="5.1.0")
The __ASSUME_TIME64_SYSCALLS flag defined.
- Linux v5.1 and default minimal kernel version
The __ASSUME_TIME64_SYSCALLS not defined, but kernel supports utimensat_time64
syscall.
- Linux v4.19 (no utimensat_time64 support) with default minimal kernel
version for contemporary glibc
This kernel doesn't support utimensat_time64 syscall, so the fallback
to utimensat is tested.
The above tests were performed with Y2038 redirection applied as well as
without (so the __TIMESIZE != 64 execution path is checked as well).
No regressions were observed.
Introduce pthread_clockjoin_np as a version of pthread_timedjoin_np that
accepts a clockid_t parameter to indicate which clock the timeout should be
measured against. This mirrors the recently-added POSIX-proposed "clock"
wait functions.
Checked on x86_64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch adds the generic futex_lock_pi and futex_unlock_pi to wrap
around the syscall machinery required to issue the syscall calls. It
simplifies a bit the futex code required to implement PI mutexes.
No function changes, checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
To help y2038 work avoid duplicate all the logic of nanosleep on
non cancellable version, the patch replace it with a new futex
operation, lll_timedwait. The changes are:
- Add a expected value for __lll_clocklock_wait, so it can be used
to wait for generic values.
- Remove its internal atomic operation and move the logic to
__lll_clocklock. It makes __lll_clocklock_wait even more generic
and __lll_clocklock slight faster on fast-path (since it won't
require a function call anymore).
- Add lll_timedwait, which uses __lll_clocklock_wait, to replace both
__pause_nocancel and __nanosleep_nocancel.
It also allows remove the sparc32 __lll_clocklock_wait implementation
(since it is similar to the generic one).
Checked on x86_64-linux-gnu, sparcv9-linux-gnu, and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
NPTL is already Linux specific, there is no need to parametrize low
level lock futex operations and add a sysdep Linux specific
implementation. This patch moves the relevant Linux code to nptl one.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
NPTL is already Linux specific, there is no need to parametrize futex
operations and add a sysdep Linux specific implementation. This patch
moves the relevant Linux code to nptl one.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Also make the public prototype of gettimeofday declare its second
argument with type "void *" unconditionally, consistent with POSIX.
It is also consistent with POSIX.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Consolidate generic gettimeofday implementation to use clock_gettime.
Linux ports that still provide gettimeofday through vDSO are not
changed.
Remove sysdeps/unix/clock_gettime.c, which implemented clock_gettime
using gettimeofday; new OS ports must provide a real implementation of
clock_gettime.
Rename sysdeps/mach/gettimeofday.c to sysdeps/mach/clock_gettime.c and
convert into an implementation of clock_gettime. It only supports
CLOCK_REALTIME; Mach does not appear to have any support for monotonic
clocks. It uses __host_get_time, which provides at best microsecond
resolution. Hurd is currently using sysdeps/posix/clock_getres.c for
clock_getres; its output for CLOCK_REALTIME is based on
sysconf (_SC_CLK_TCK), and I do not know whether that gives the
correct result.
Unlike settimeofday, there are no known uses of gettimeofday's
vestigial "get time zone" feature that are not bugs. (The per-process
timezone support in localtime and friends is unrelated, and the
programs that set the kernel's offset between the hardware clock and
UTC do not need to read it back.) Therefore, this feature is dummied
out. Henceforth, if gettimeofday's "struct timezone" argument is not
NULL, it will write zeroes to both fields. Any program that is
actually looking at this data will thus think it is running in UTC,
which is probably more correct than whatever it was doing before.
[__]gettimeofday no longer has any internal callers, so we can now
remove its internal prototype and PLT bypass aliases. The
__gettimeofday@GLIBC_2.0 export remains, in case it is used by any
third-party code.
It also allows to simplify the arch-specific implementation on x86 and
powerpc to remove the hack to disable the internal route to non iFUNC
variant for internal symbol.
This patch also fixes a missing optimization on aarch64, powerpc, and
x86 where the code used on static build do not use the vDSO.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Co-authored-by: Zack Weinberg <zackw@panix.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
timespec_get is the same function as clock_gettime, with an obnoxious
coating of NIH painted on it by the ISO C committee. In addition to
the rename, it takes its arguments in a different order, it returns 0
on *failure* or a positive number on *success*, and it requires that
all of its TIME_* constants be positive. This last means we cannot
directly reuse the existing CLOCK_* constants for it, because
those have been allocated starting with CLOCK_REALTIME = 0 on all
existing platforms.
This patch simply promotes the sysdeps/posix implementation to
universal, and removes the Linux-specific implementation, whose
apparent reason for existing was to cut out one function call's worth
of overhead.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
ftime is an obsolete variation on gettimeofday, offering only
millisecond time resolution; it was probably a system call in ooold
versions of BSD Unix. For historic reasons, we had three
implementations of it. These are all consolidated into time/ftime.c,
and then the function is deprecated.
For some reason, the implementation of ftime in terms of gettimeofday
was rounding rather than truncating microseconds to milliseconds. In
all the other places where we use a higher-resolution time function to
implement a lower-resolution one, we truncate. ftime is changed to
match, just for tidiness' sake.
Like gettimeofday, ftime tries to report the time zone, and using that
information is always a bug. This patch dummies out the reported
timezone information; the timezone and dstflag fields of the
returned "struct timeb" will always be zero.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, and powerpc-linux-gnu.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
As for gettimeofday, time will be implemented based on clock_gettime
on all platforms and internal code should use clock_gettime
directly. In addition to removing a layer of indirection, this will
allow us to remove the PLT-bypass gunk for gettimeofday.
The changed code always assumes __clock_gettime (CLOCK_REALTIME)
or __clock_gettime (CLOCK_REALTIME_COARSE) (for Linux case) cannot
fail, using the same rationale for gettimeofday change. And internal
helper was added (time_now).
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, and powerpc-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Change the default implementation of time to call clock_gettime,
to align with new Linux ports that are expected to only implement
__NR_clock_gettime. Arch-specific implementation that either call
the time vDSO or route to gettimeofday vDSO are not removed.
Also for Linux, CLOCK_REALTIME_COARSE is used instead of generic
CLOCK_REALTIME clockid. This takes less CPU time and its behavior
better matches what the current glibc does.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Co-authored-by: Zack Weinberg <zackw@panix.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Unconditionally, on all ports, use clock_settime to implement
settimeofday. Remove sysdeps/unix/clock_settime.c, which implemented
clock_settime by calling settimeofday; new OS ports must henceforth
provide a real implementation of clock_settime.
Hurd had a real implementation of settimeofday but not of
clock_settime; this patch converts it into an implementation of
clock_settime. It only supports CLOCK_REALTIME and microsecond
resolution; Hurd/Mach does not appear to have any support for
finer-resolution clocks.
The vestigial "set time zone" feature of settimeofday complicates the
generic settimeofday implementation a little. The only remaining uses
of this feature that aren't just bugs, are using it to inform the
Linux kernel of the offset between the hardware clock and UTC, on
systems where the hardware clock doesn't run in UTC (usually because
of dual-booting with Windows). There currently isn't any other way to
do this. However, the callers that do this call settimeofday with
_only_ the timezone argument non-NULL. Therefore, glibc's new
behavior is: callers of settimeofday must supply one and only one of
the two arguments. If both arguments are non-NULL, or both arguments
are NULL, the call fails and sets errno to EINVAL.
When only the timeval argument is supplied, settimeofday calls
__clock_settime(CLOCK_REALTIME), same as stime.
When only the timezone argument is supplied, settimeofday calls a new
internal function called __settimezone. On Linux, only, this function
will pass the timezone structure to the settimeofday system call. On
all other operating systems, and on Linux architectures that don't
define __NR_settimeofday, __settimezone is a stub that always sets
errno to ENOSYS and returns -1.
The settimeoday syscall is enabled on Linux by the flag
COMPAT_32BIT_TIME, which is an option to either 32-bits ABIs or COMPAT
builds (defined usually by 64-bit kernels that want to support 32-bit
ABIs, such as x86). The idea to future 64-bit time_t only ABIs
is to not provide settimeofday syscall.
The same semantics are implemented for Linux/Alpha's GLIBC_2.0 compat
symbol for settimeofday.
There are no longer any internal callers of __settimeofday, so the
internal prototype is removed.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Unconditionally, on all ports, use clock_settime to implement stime,
not settimeofday or a direct syscall. Then convert stime into a
compatibility symbol and remove its prototype from time.h.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Since gettimeofday will shortly be implemented in terms of
clock_gettime on all platforms, internal code should use clock_gettime
directly; in addition to removing a layer of indirection, this will
allow us to remove the PLT-bypass gunk for gettimeofday. (We can't
quite do that yet, but it'll be coming later in this patch series.)
In many cases, the changed code does fewer conversions.
The changed code always assumes __clock_gettime (CLOCK_REALTIME)
cannot fail. Most of the call sites were assuming gettimeofday could
not fail, but a few places were checking for errors. POSIX says
clock_gettime can only fail if the clock constant is invalid or
unsupported, and CLOCK_REALTIME is the one and only clock constant
that's required to be supported. For consistency I grepped the entire
source tree for any other places that checked for errors from
__clock_gettime (CLOCK_REALTIME), found one, and changed it too.
(For the record, POSIX also says gettimeofday can never fail.)
(It would be nice if we could declare that GNU systems will always
support CLOCK_MONOTONIC as well as CLOCK_REALTIME; there are several
places where we are using CLOCK_REALTIME where _MONOTONIC would be
more appropriate, and/or trying to use _MONOTONIC and then falling
back to _REALTIME. But the Hurd doesn't support CLOCK_MONOTONIC yet,
and it looks like adding it would involve substantial changes to
gnumach's internals and API. Oh well.)
A few Hurd-specific files were changed to use __host_get_time instead
of __clock_gettime, as this seemed tidier. We also assume this cannot
fail. Skimming the code in gnumach leads me to believe the only way
it could fail is if __mach_host_self also failed, and our
Hurd-specific code consistently assumes that can't happen, so I'm
going with that.
With the exception of support/support_test_main.c, test cases are not
modified, mainly because I didn't want to have to figure out which
test cases were testing gettimeofday specifically.
The definition of GETTIME in sysdeps/generic/memusage.h had a typo and
was not reading tv_sec at all. I fixed this. It appears nobody has been
generating malloc traces on a machine that doesn't have a superseding
definition.
There are a whole bunch of places where the code could be simplified
by factoring out timespec subtraction and/or comparison logic, but I
want to keep this patch as mechanical as possible.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Linux/Alpha has two versions of several system call wrappers that take
or return data of type "struct timeval" (possibly nested inside a
larger structure). The GLIBC_2.0 version is a compat symbol that
calls __NR_osf_foo or __NR_old_foo and uses a struct timeval with a
32-bit tv_sec field. The GLIBC_2.1 version is used for current code,
calls __NR_foo, and uses a struct timeval with a 64-bit tv_sec field.
This patch changes all of the compat symbols of this type to be
wrappers around their GLIBC_2.1 counterparts; the compatibility system
calls will no longer be used. It serves as a proposal for part of how
we do the transition to 64-bit time_t on systems that currently use
32-bit time_t:
* The patched glibc will NOT use system calls that involve 32-bit
time_t to implement its compatibility symbols. This will make both
our lives and the kernel maintainers' lives easier. The primary
argument I've seen against it is that the kernel could warn about
uses of the old system calls, helping people find old binaries that
need to be recompiled. I think there are several other ways we
could accomplish this, e.g. scripts to scan the filesystem for
binaries with references to the old symbol versions, or issuing
diagnostics ourselves.
* The compat symbols do NOT report failure after the Y2038 deadline.
An earlier revision of this patch had them return -1 and set errno
to EOVERFLOW, but Adhemerval pointed out that many of them have
already performed side effects at the point where we discover the
overflow, so that would break more than it fixes. Also, we don't
want people to be _checking_ for EOVERFLOW from these functions; we
want them to recompile with 64-bit time_t. So it's not actually
useful for them to report failure to the calling code.
* What they do do, when they encounter overflow, is saturate the
overflowed "struct timeval"(s): tv_sec is set to INT32_MAX and
tv_nsec is set to 999999. That means time stops advancing for
programs with 32-bit time_t when they reach the deadline. That's
obviously going to break stuff, but I think wrapping around is
probably going to break _more_ stuff. I'd be interested to hear
arguments against, if anyone has one.
The new header file tv32-compat.h is currently Alpha-specific but I
mean for it to be reused to aid in writing wrappers for all affected
architectures. I only put it in sysdeps/unix/sysv/linux/alpha for now
because I haven't checked whether the various "foo32" structures it
defines agree with the ABI for ports other than Linux/Alpha.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch provides new __clock_getres64 explicit 64 bit function for
getting the resolution (precision) of specified clock ID. Moreover, a
32 bit version - __clock_getres has been refactored to internally use
__clock_getres64.
The __clock_getres is now supposed to be used on systems still supporting
32 bit time (__TIMESIZE != 64) - hence the necessary conversion from 64 bit
struct __timespec64 to struct timespec.
The new clock_getres_time64 syscall available from Linux 5.1+ has been used,
when applicable.
On systems which are not supporting clock_getres_time64 (as their
clock_getres supports 64 bit time ABI) the vDSO syscall is attempted.
On the contrary the non-vDSO syscall is used for clock_getres_time64 as
up till now the kernel is not providing such interface.
No additional checks (i.e. if tv_nsec value overflow) are performed on
values returned via clock_getres{_time64} syscall, as it is assumed that
the Linux kernel will either return 0 and provide correct value or error.
The check for tv_sec being out of range on systems still supporting 32 bit
time (__TIMESIZE != 64) without Y2038 time support is also omitted as it is
_very_ unlikely that we would have a timer with resolution which exceeds 32
bit time_t range.
Build tests:
- The code has been tested on x86_64/x86 (native compilation):
make PARALLELMFLAGS="-j8" && make xcheck PARALLELMFLAGS="-j8"
- The glibc has been build tested (make PARALLELMFLAGS="-j8") for
x86 (i386), x86_64-x32, and armv7
Run-time tests:
- Run specific tests on ARM/x86 32bit systems (qemu):
https://github.com/lmajewski/meta-y2038 and run tests:
https://github.com/lmajewski/y2038-tests/commits/master
- Use of cross-test-ssh.sh for ARM (armv7):
make PARALLELMFLAGS="-j8" test-wrapper='./cross-test-ssh.sh root@192.168.7.2' xcheck
Linux kernel, headers and minimal kernel version for glibc build test
matrix:
- Linux v5.1 (with clock_getres_time64) and glibc build with v5.1 as
minimal kernel version (--enable-kernel="5.1.0")
The __ASSUME_TIME64_SYSCALLS flag defined.
- Linux v5.1 and default minimal kernel version
The __ASSUME_TIME64_SYSCALLS not defined, but kernel supports
clock_getres_time64 syscall.
- Linux v4.19 (no clock_getres_time64 support) with default minimal kernel
version for contemporary glibc
This kernel doesn't support clock_getres_time64 syscall, so the fallback
to clock_getres is tested.
The above tests were performed with Y2038 redirection applied as well as
without (so the __TIMESIZE != 64 execution path is checked as well).
No regressions were observed.
The valid_nanoseconds () static inline function has been introduced to
check if nanoseconds value is in the correct range - greater or equal to
zero and less than 1000000000.
The explicit #include <time.h> has been added to files where it was
missing.
The __syscall_slong_t type for ns has been used to avoid issues on x32.
Tested with:
- scripts/build-many-glibcs.py
- make PARALLELMFLAGS="-j12" && make PARALLELMFLAGS="-j12" xcheck on x86_64
Add a new macro __STATFS_MATCHES_STATFS64 that specifies if fsblkcnt_t
matches fsblkcnt64_t and if fsfilcnt_t matches fsfilcnt64_t.
As we don't have the padding we also need to update the overflow checker
to not access the undefined members.
Commit 95c1056962 ("elf: Use nocancel
pread64() instead of lseek()+read()") added calls to __pread64 to
the dynamic loader. On Hurd, this needs an implementation in the
dynamic loader because the rtld-pread64 rebuild pulls in too many
symbols.
Fixes: 95c1056962
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
On a 32-bit platform with a 64-bit ino_t type (__INO_T_MATCHES_INO64_T
defined) we want to update the stat struct to remove the padding as it
isn't required. As we don't have the padding we also need to update the
overflow checker to not access the undefined members.
As an svc invocation does not clobber any user space registers
despite of the return value r2 and it does not need a special
stack frame. This patch gets rid of the extra frame.
We just have to save and restore r6 and r7 as those are
preserved across function calls.
Remove _finite tests and references from x86_64. Rather than calling
__exp_finite, use exp directly (since it's the same entry point).
x86_64 builds and passes testsuite.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The rewritten clock_settime code (which now supports 64 bit time on systems
with __WORDSIZE == 32) for Linux now relies on the
__ASSUME_TIME64_SYSCALLS flag set.
Lets explicitly include the header file where it is defined to avoid
any indirect inclusion (which may pose some unwanted API definitions).
Tested with scripts/build-many-glibcs.py script.
This is in preparation for changes in the dynamic linker so that
pread() is used instead of lseek()+read().
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Linux 5.1 adds missing SySV IPC syscalls to the syscall table for
remanining one that still uses the ipc syscall on glibc (m68k, mips-o32,
powerpc, s390, sh, and sparc32). However the newly added direct ipc
syscall are different than the old ones:
1. They do not expect IPC_64, meaning __IPC_64 should be set to zero
when new syscalls are used. And new syscalls can not be used
for compat functions like __old_semctl (to emulated old sysvipc it
requires to use the old __NR_ipc syscall without __IPC_64).
Thus IPC_64 is redefined for newer kernels on affected ABIs.
2. semtimedop and semop does not exist on 32-bit ABIs (only
semtimedop_time64 is supplied). The provided syscall wrappers only
uses the wire-up syscall if __NR_semtimedop and __NR_semop are
also defined.
Checked on x86_64-linux-gnu and i686-linux-gnu on both a 4.15 kernel
configure with default options and sysvipc tests on a 5.3.0 kernel with
--enable-kernel=5.1.
Tested-by: Paul A. Clarke <pc@us.ibm.com>
All nptl targets have these signal definitions nowadays. This
changes also replaces the nptl-generic version of pthread_sigmask
with the Linux version.
Tested on x86_64-linux-gnu and i686-linux-gnu. Built with
build-many-glibcs.py.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Besides semop being a subset of semtimedop, new 32-bit architectures
on Linux are not expected to provide the syscall (only the 64-bit time
semtimedop).
Also, Linux 5.1 only wired-up semtimedop for the 64-bit architectures
that missed it (powerpc, s390, and sparc). This simplifies the code
to support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
This patch refactor the internal sysvipc in two main points:
1. Add a new __ASSUME_SYSVIPC_DEFAULT_IPC_64 to infer the __IPC_64
value to be used along either the multiplexed __NR_ipc or wired-up
syscall. The defaut value assumed for __IPC_64 is also changed
from 0x100 to 0x0, aligning with Linux generic UAPI. The idea
is to simplify the Linux 5.1 wire-up for sysvipc syscalls for
some 32-bit ABIs (which expectes __IPC_64 being 0x0) and simplify
new ports (which will no longer need to add ipc_priv.h).
2. It also removes some duplicated internal definition used on compat
sysvipc symbols defined at ipc_priv.h (more specifically the
__old_ipc_perm, SEMCTL_ARG_ADDRESS, MSGRCV_ARGS, and
SEMTIMEDOP_IPC_ARGS). The idea is also to make it simpler to enable
the new wire-up sysvipc syscall provided by Linux v5.1.
There is no semantic change expected on any port. Checked with a build
against all affected ABIs.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Linux 5.3 adds a PTRACE_GET_SYSCALL_INFO constant, with an associated
structure and PTRACE_SYSCALL_INFO_* constants.
This patch adds these to sys/ptrace.h in glibc
(PTRACE_GET_SYSCALL_INFO in each architecture version, the rest in
bits/ptrace-shared.h). As with previous such constants and associated
structures, the glibc version of the structure is named struct
__ptrace_syscall_info.
Tested for x86_64, and with build-many-glibcs.py.
This patch sets the mode field in ipc_perm as mode_t for all architectures,
as POSIX specification [1]. The changes required are as follow:
1. It moves the ipc_perm definition out of ipc.h to its own header
ipc_perm.h. It also allows consolidate the IPC_* definition on
only one header.
2. The generic implementation follow the kernel ipc64_perm size so the
syscall can be made directly without temporary buffer copy. However,
since glibc defines the MODE field as mode_t, it omits the __PAD1 field
(since glibc does not export mode_t as 16-bit for any architecture).
It is a two-fold improvement:
2.1. New implementation which follow Linux UAPI will not need to
provide an arch-specific ipc-perm.h header neither wrongly
use the wrong 16-bit definition from previous default ipc.h
(as csky did).
2.1. It allows consolidate ipc_perm definition for architectures that
already provide mode_t as 32-bit.
3. All kernel ABIs for the supported architectures already provides the
expected padding for mode type extension to 32-bit. However, some
architectures the padding has the wrong placement, so it requires
the ipc control routines (msgctl, semctl, and shmctl) to adjust the
mode field accordingly. Currently they are armeb, microblaze, m68k,
s390, and sheb.
A new assume is added, __ASSUME_SYSVIPC_BROKEN_MODE_T, which the
required ABIs define.
4. For the ABIs that define __ASSUME_SYSVIPC_BROKEN_MODE_T, it also
require compat symbols that do not adjust the mode field.
Checked on arm-linux-gnueabihf, aarch64-linux-gnu, powerpc64le-linux-gnu,
and x86_64-linux-gnu. I also checked the sysvipc tests on hppa-linux-gnu,
sh4-linux-gnu, s390x-linux-gnu, and s390-linux-gnu.
I also did a sanity test against armeb qemu usermode for the sysvipc
tests.
[BZ #18231]
* sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add
bits/ipc-perm.h.
* sysdeps/unix/sysv/linux/aarch64/bits/ipc.h: Remove file.
* sysdeps/unix/sysv/linux/alpha/bits/ipc.h: Likewise.
* sysdeps/unix/sysv/linux/hppa/bits/ipc.h: Likewise.
* sysdeps/unix/sysv/linux/ia64/bits/ipc.h: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/ipc.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/ipc.h: Likewise.
* sysdeps/unix/sysv/linux/s390/bits/ipc.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/ipc.h: Likewise.
* sysdeps/unix/sysv/linux/arm/kernel-features.h
[__BYTE_ORDER == __BIG_ENDIAN] (__ASSUME_SYSVIPC_BROKEN_MODE_T):
Define.
* sysdeps/sysv/linux/microblaze/kernel-features.h: Likewise.
* sysdeps/unix/sysv/linux/s390/kernel-features.h
[!__s390x__] (__ASSUME_SYSVIPC_BROKEN_MODE_T): Define.
* sysdeps/unix/sysv/linux/sh/kernel-features.h
(__ASSUME_SYSVIPC_BROKEN_MODE_T): Define.
* sysdeps/unix/sysv/linux/m68k/kernel-features.h: Likewise.
* sysdeps/unix/sysv/linux/bits/ipc-perm.h: New file.
* sysdeps/unix/sysv/linux/powerpc/bits/ipc-perm.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/ipc-perm.h: Likewise.
* sysdeps/unix/sysv/linux/bits/ipc.h (ipc_perm): Move to
bits/ipc-perm.h.
* sysdeps/unix/sysv/linux/hppa/bits/ipc-perm.h: New file.
* sysdeps/unix/sysv/linux/kernel-features.h: Add comment about
__ASSUME_SYSVIPC_BROKEN_MODE_T semantic.
* sysdeps/unix/sysv/linux/msgctl.c (DEFAULT_VERSION): Define as
2.31 if __ASSUME_SYSVIPC_BROKEN_MODE_T is defined.
(msgctl_syscall, __msgctl_mode16): New symbol.
(__new_msgctl): Add bits for __ASSUME_SYSVIPC_BROKEN_MODE_T.
* sysdeps/unix/sysv/linux/semctl.c: Likewise.
* sysdeps/unix/sysv/linux/shmctl.c: Likewise.
* sysdeps/unix/sysv/linux/arm/be/libc.abilist (GLIBC_2.31): Add
msgctl, semctl, and shmctl.
* sysdeps/sysv/linux/microblaze/be/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/be/libc.abilist: Likewise.
* conform/data/sys/ipc.h-data: Only xfail {struct ipc_perm} mode_t
mode for Hurd.
* sysdeps/unix/sysv/linux/m68k/Versions (libc) [GLIBC_2.31]: Add
msgctl, semctl, and shmctl.
* sysdeps/unix/sysv/linux/arm/be/Versions: New file.
* sysdeps/unix/sysv/linux/microblaze/be/Versions: Likewise.
* sysdeps/unix/sysv/linux/sh/be/Versions: Likewise.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/sys_ipc.h.html
This patch provides new __clock_settime64 explicit 64 bit function for
setting the time. Moreover, a 32 bit version - __clock_settime - has been
refactored to internally use __clock_settime64.
The __clock_settime is now supposed to be used on systems still supporting
32 bit time (__TIMESIZE != 64) - hence the necessary conversion to 64 bit
struct timespec.
The new clock_settime64 syscall available from Linux 5.1+ has been used,
when applicable.
In this patch the internal padding (tv_pad) of struct __timespec64 is
left untouched (on systems with __WORDSIZE == 32) as Linux kernel ignores
upper 32 bits of tv_nsec.
Build tests:
- The code has been tested on x86_64/x86 (native compilation):
make PARALLELMFLAGS="-j8" && make xcheck PARALLELMFLAGS="-j8"
- The glibc has been build tested (make PARALLELMFLAGS="-j8") for
x86 (i386), x86_64-x32, and armv7
Run-time tests:
- Run specific tests on ARM/x86 32bit systems (qemu):
https://github.com/lmajewski/meta-y2038 and run tests:
https://github.com/lmajewski/y2038-tests/commits/master
- Use of cross-test-ssh.sh for ARM (armv7):
make PARALLELMFLAGS="-j8" test-wrapper='./cross-test-ssh.sh root@192.168.7.2' xcheck
Linux kernel, headers and minimal kernel version for glibc build test
matrix:
- Linux v5.1 (with clock_settime64) and glibc build with v5.1 as minimal
kernel version (--enable-kernel="5.1.0")
The __ASSUME_TIME64_SYSCALLS flag defined.
- Linux v5.1 and default minimal kernel version
The __ASSUME_TIME64_SYSCALLS not defined, but kernel supports
__clock_settime64 syscalls.
- Linux v4.19 (no clock_settime64 support) with default minimal kernel
version for contemporary glibc
This kernel doesn't support __clock_settime64 syscalls, so the fallback
to clock_settime is tested.
The above tests were performed with Y2038 redirection applied as well as
without (so the __TIMESIZE != 64 execution path is checked as well).
No regressions were observed.
* include/time.h (__clock_settime64):
Add __clock_settime alias according to __TIMESIZE define
* sysdeps/unix/sysv/linux/clock_settime.c (__clock_settime):
Refactor this function to be used only on 32 bit machines as a wrapper
on __clock_settime64.
* sysdeps/unix/sysv/linux/clock_settime.c (__clock_settime64): Add
* sysdeps/unix/sysv/linux/clock_settime.c (__clock_settime64):
Use clock_settime64 kernel syscall (available from 5.1+ Linux)
This patch changes how the fallback getdents64 implementation calls
non-LFS getdents by replacing the scratch_buffer with static buffer
plus a loop on getdents calls. This avoids the potential malloc
call on scratch_buffer_set_array_size for large input buffer size
at the cost of more getdents syscalls.
It also adds a small optimization for older kernels, where the first
ENOSYS failure for getdents64 disable subsequent calls.
Check the dirent tests on a mips64-linux-gnu with getdents64 code
disabled.
* sysdeps/unix/sysv/linux/mips/mips64/getdents64.c (__getdents64):
Add small optimization for older kernel to avoid issuing
__NR_getdents64 on each call and replace scratch_buffer usage with
a static allocated buffer.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
_dl_var_init is used to patch the read-only data section after
relocation. Several architectures use this to update
GLRO(page_size) with the correct value for the static dlopen case,
where _rtld_global_ro has not been initialized by the dynamic
loader.
RISC-V does not need this. The RISC-V Instruction Set Manual,
Volume II: Privileged Architecture, Document Version
20190608-Priv-MSU-Ratified says this:
After much deliberation, we have settled on a conventional
page size of 4 KiB for both RV32 and RV64. We expect this
decision to ease the porting of low-level runtime software
and device drivers. The TLB reach problem is ameliorated by
transparent superpage support in modern operating systems
[2]. Additionally, multi-level TLB hierarchies are quite
inexpensive relative to the multi-level cache hierarchies
whose address space they map.
[2] Juan Navarro, Sitaram Iyer, Peter Druschel, and
Alan Cox. Practical, transparent operating system support
for superpages. SIGOPS Oper. Syst. Rev., 36(SI):89–104,
December 2002.
This means that the initialization of
_rtld_global_ro._dl_page_size in elf/rtld.c with EXEC_PAGESIZE
is sufficient for RISC-V.
Since at least POWER8, there is no performance advantage to entering
"Ignore Exceptions Mode", and doing so conditionally requires
- the conditional logic, and
- a system call.
Make it a no-op for uses within glibc.
With only two exceptions (sys/types.h and sys/param.h, both of which
historically might have defined BYTE_ORDER) the public headers that
include <endian.h> only want to be able to test __BYTE_ORDER against
__*_ENDIAN.
This patch creates a new bits/endian.h that can be included by any
header that wants to be able to test __BYTE_ORDER and/or
__FLOAT_WORD_ORDER against the __*_ENDIAN constants, or needs
__LONG_LONG_PAIR. It only defines macros in the implementation
namespace.
The existing bits/endian.h (which could not be included independently
of endian.h, and only defines __BYTE_ORDER and maybe __FLOAT_WORD_ORDER)
is renamed to bits/endianness.h. I also took the opportunity to
canonicalize the form of this header, which we are stuck with having
one copy of per architecture. Since they are so short, this means git
doesn’t understand that they were renamed from existing headers, sigh.
endian.h itself is a nonstandard header and its only remaining use
from a standard header is guarded by __USE_MISC, so I dropped the
__USE_MISC conditionals from around all of the public-namespace things
it defines. (This means, an application that requests strict library
conformance but includes endian.h will still see the definition of
BYTE_ORDER.)
A few changes to specific bits/endian(ness).h variants deserve
mention:
- sysdeps/unix/sysv/linux/ia64/bits/endian.h is moved to
sysdeps/ia64/bits/endianness.h. If I remember correctly, ia64 did
have selectable endianness, but we have assembly code in
sysdeps/ia64 that assumes it’s little-endian, so there is no reason
to treat the ia64 endianness.h as linux-specific.
- The C-SKY port does not fully support big-endian mode, the compile
will error out if __CSKYBE__ is defined.
- The PowerPC port had extra logic in its bits/endian.h to detect a
broken compiler, which strikes me as unnecessary, so I removed it.
- The only files that defined __FLOAT_WORD_ORDER always defined it to
the same value as __BYTE_ORDER, so I removed those definitions.
The SH bits/endian(ness).h had comments inconsistent with the
actual setting of __FLOAT_WORD_ORDER, which I also removed.
- I *removed* copyright boilerplate from the few bits/endian(ness).h
headers that had it; these files record a single fact in a fashion
dictated by an external spec, so I do not think they are copyrightable.
As long as I was changing every copy of ieee754.h in the tree, I
noticed that only the MIPS variant includes float.h, because it uses
LDBL_MANT_DIG to decide among three different versions of
ieee854_long_double. This patch makes it not include float.h when
GCC’s intrinsic __LDBL_MANT_DIG__ is available.
* string/endian.h: Unconditionally define LITTLE_ENDIAN,
BIG_ENDIAN, PDP_ENDIAN, and BYTE_ORDER. Condition byteswapping
macros only on !__ASSEMBLER__. Move the definitions of
__BIG_ENDIAN, __LITTLE_ENDIAN, __PDP_ENDIAN, __FLOAT_WORD_ORDER,
and __LONG_LONG_PAIR to...
* string/bits/endian.h: ...this new file, which includes
the renamed header bits/endianness.h for the definition of
__BYTE_ORDER and possibly __FLOAT_WORD_ORDER.
* string/Makefile: Install bits/endianness.h.
* include/bits/endian.h: New wrapper.
* bits/endian.h: Rename to bits/endianness.h.
Add multiple-include guard. Rewrite the comment explaining what
the machine-specific variants of this file should do.
* sysdeps/unix/sysv/linux/ia64/bits/endian.h:
Move to sysdeps/ia64.
* sysdeps/aarch64/bits/endian.h
* sysdeps/alpha/bits/endian.h
* sysdeps/arm/bits/endian.h
* sysdeps/csky/bits/endian.h
* sysdeps/hppa/bits/endian.h
* sysdeps/ia64/bits/endian.h
* sysdeps/m68k/bits/endian.h
* sysdeps/microblaze/bits/endian.h
* sysdeps/mips/bits/endian.h
* sysdeps/nios2/bits/endian.h
* sysdeps/powerpc/bits/endian.h
* sysdeps/riscv/bits/endian.h
* sysdeps/s390/bits/endian.h
* sysdeps/sh/bits/endian.h
* sysdeps/sparc/bits/endian.h
* sysdeps/x86/bits/endian.h:
Rename to endianness.h; canonicalize form of file; remove
redundant definitions of __FLOAT_WORD_ORDER.
* sysdeps/powerpc/bits/endianness.h: Remove logic to check for
broken compilers.
* ctype/ctype.h
* sysdeps/aarch64/nptl/bits/pthreadtypes-arch.h
* sysdeps/arm/nptl/bits/pthreadtypes-arch.h
* sysdeps/csky/nptl/bits/pthreadtypes-arch.h
* sysdeps/ia64/ieee754.h
* sysdeps/ieee754/ieee754.h
* sysdeps/ieee754/ldbl-128/ieee754.h
* sysdeps/ieee754/ldbl-128ibm/ieee754.h
* sysdeps/m68k/nptl/bits/pthreadtypes-arch.h
* sysdeps/microblaze/nptl/bits/pthreadtypes-arch.h
* sysdeps/mips/ieee754/ieee754.h
* sysdeps/mips/nptl/bits/pthreadtypes-arch.h
* sysdeps/nios2/nptl/bits/pthreadtypes-arch.h
* sysdeps/nptl/pthread.h
* sysdeps/riscv/nptl/bits/pthreadtypes-arch.h
* sysdeps/sh/nptl/bits/pthreadtypes-arch.h
* sysdeps/sparc/sparc32/ieee754.h
* sysdeps/unix/sysv/linux/generic/bits/stat.h
* sysdeps/unix/sysv/linux/generic/bits/statfs.h
* sysdeps/unix/sysv/linux/sys/acct.h
* wctype/bits/wctype-wchar.h:
Include bits/endian.h, not endian.h.
* sysdeps/unix/sysv/linux/hppa/pthread.h: Don’t include endian.h.
* sysdeps/mips/ieee754/ieee754.h: Use __LDBL_MANT_DIG__
in ifdefs, instead of LDBL_MANT_DIG. Only include float.h
when __LDBL_MANT_DIG__ is not predefined, in which case
define __LDBL_MANT_DIG__ to equal LDBL_MANT_DIG.
The Linux 5.3 uapi headers have some rearrangement relating to MAP_*
constants, which includes the effect of adding definitions of MAP_SYNC
on powerpc and sparc. This patch updates the corresponding glibc
bits/mman.h headers accordingly, and updates the Linux kernel version
number in tst-mman-consts.py to reflect that these constants are now
current with that kernel version.
Tested with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/powerpc/bits/mman.h [__USE_MISC]
(MAP_SYNC): New macro.
* sysdeps/unix/sysv/linux/sparc/bits/mman.h [__USE_MISC]
(MAP_SYNC): Likewise.
* sysdeps/unix/sysv/linux/tst-mman-consts.py (main): Update Linux
kernel version number to 5.3.
fesetenv_mode is used variously to write the FPSCR exception enable
bits and rounding mode bits. These are referred to as the control
bits in the POWER ISA. Change the name to be reflective of its
current and expected use, and match up well with fegetenv_control.
libc_feholdsetround_noex_ppc_ctx currently performs:
1. Read FPSCR, save to context.
2. Create new FPSCR value: clear enables and set new rounding mode.
3. Write new value to FPSCR.
Since other bits just pass through, there is no need to write them.
Instead, write just the changed values (enables and rounding mode),
which can be a bit more efficient.
fegetenv_status is used variously to retrieve the FPSCR exception enable
bits, rounding mode bits, or both. These are referred to as the control
bits in the POWER ISA. FPSCR status bits are also returned by the
'mffs' and 'mffsl' instructions, but they are uniformly ignored by all
uses of fegetenv_status. Change the name to be reflective of its
current and expected use.
Reviewed-By: Paul E Murphy <murphyp@linux.ibm.com>
On POWER9, use more efficient means to update the 2-bit rounding mode
via the 'mffscrn' instruction (instead of two 'mtfsb0/1' instructions
or one 'mtfsfi' instruction that modifies 4 bits).
Suggested-by: Paul E. Murphy <murphyp@linux.ibm.com>
Reviewed-By: Paul E Murphy <murphyp@linux.ibm.com>
ROUND_TO_ODD and a couple of other places use libc_feupdateenv_test to
restore the rounding mode and exception enables, preserve exception flags,
and test whether given exception(s) were generated.
If the exception flags haven't changed, then it is sufficient and a bit
more efficient to just restore the rounding mode and enables, rather than
writing the full Floating-Point Status and Control Register (FPSCR).
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
fenv_private.h includes unused functions, magic macro constants, and
some replicated common code fragments.
Remove unused functions, replace magic constants with constants from
fenv_libc.h, and refactor replicated code.
Suggested-by: Paul E. Murphy <murphyp@linux.ibm.com>
Reviewed-By: Paul E Murphy <murphyp@linux.ibm.com>
This patch adds the new TCP_TX_DELAY constant from Linux 5.3 to
sysdeps/gnu/netinet/tcp.h.
Tested for x86_64.
* sysdeps/gnu/netinet/tcp.h (TCP_TX_DELAY): New macro.
SET_RESTORE_ROUND brackets a block of code, temporarily setting and
restoring the rounding mode and letting everything else, including
exceptions generated within the block, pass through.
On powerpc, the current code clears the exception enables, which will hide
exceptions generated within the block. This issue was introduced by me
in commit e905212627.
Fix this by not clearing exception enable bits in the prologue.
Also, since we are no longer changing the enable bits in either the
prologue or the epilogue, there is no need to test for entering/exiting
non-stop mode.
Also, optimize the prologue get/save/set rounding mode operations for
POWER9 and later by using 'mffscrn' when possible.
Suggested-by: Paul E. Murphy <murphyp@linux.ibm.com>
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
Fixes: e905212627
2019-09-19 Paul A. Clarke <pc@us.ibm.com>
* sysdeps/powerpc/fpu/fenv_libc.h (fegetenv_and_set_rn): New.
(__fe_mffscrn): New.
* sysdeps/powerpc/fpu/fenv_private.h (libc_feholdsetround_ppc_ctx):
Do not clear enable bits, remove obsolete code, use
fegetenv_and_set_rn.
(libc_feresetround_ppc): Remove obsolete code, use
fegetenv_and_set_rn.
Use macro _HP_TIMING_S390_H instead of _HP_TIMING_H
in s390 specific hp-timing.h
ChangeLog:
* sysdeps/s390/hp-timing.h (_HP_TIMING_H): Undefine.
(_HP_TIMING_S390_H): Define.
This patch updates syscall-names.list for Linux 5.3, adding two new
syscalls.
Tested with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/syscall-names.list: Update kernel
version to 5.3.
(clone3): New syscall.
(pidfd_open): Likewise.
This patch adds support for HP_TIMING_NOW if we build at least
with -march=z10 -mzarch. Otherwise we are still using the
generic hp-timing.h.
ChangeLog:
* sysdeps/s390/hp-timing.h: New file.
Building glibc for RISC-V with Linux 5.3 kernel headers fails because
<linux/sched.h>, included in vfork.S for CLONE_* constants, contains a
structure definition not safe for inclusion in assembly code.
All other architectures already avoid use of that header in vfork.S,
either defining the CLONE_* constants locally or embedding the
required values directly in the relevant instruction, where they
implement vfork using the clone syscall (see the implementations for
aarch64, ia64, mips and nios2). This patch makes the RISC-V version
define the constants locally like the other architectures.
Tested build for all three RISC-V configurations in
build-many-glibcs.py with Linux 5.3 headers.
* sysdeps/unix/sysv/linux/riscv/vfork.S: Do not include
<linux/sched.h>.
(CLONE_VM): New macro.
(CLONE_VFORK): Likewise.
There is no need to sparc64 provide an arch-specific implementation to
route to POSIX one (which uses gettimeofday). Linux one already handles
the case for architecture that does not have __NR_time.
No semantic changes, checked against a build for sparc64-linux-gnu.
* sysdeps/unix/sysv/linux/sparc/sparc64/time.c: Remove file.
This patch consolidates the mips, mips64, and mips64-n32
INTERNAL_VSYSCALL_CALL on a single implementation.
No semantic changes. I checked against a build for mips-linux-gnu,
mips64-linux-gnu, and mips64-n32-linux-gnu.
* sysdeps/unix/sysv/linux/mips/mips32/sysdep.h
(INTERNAL_VSYSCALL_CALL): Remove.
* sysdeps/unix/sysv/linux/mips/mips64/n32/sysdep.h
(INTERNAL_VSYSCALL_CALL): Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/sysdep.h
(INTERNAL_VSYSCALL_CALL): Likewise.
* sysdeps/unix/sysv/linux/mips/sysdep.h (INTERNAL_VSYSCALL_CALL):
New macro.
This patch simplifies the powerpc internal macros for vDSO calls
by:
- Removing INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK, used solely on
get_timebase_freq.
- Adjust INTERNAL_VSYSCALL_CALL_TYPE powerpc32 to follow powerpc64
argument ordering.
- Use HAVE_*_VSYSCALL instead of explicit strings.
- Make powerpc libc-vdso.h include generic implementation.
No semantic change expected, checked on powerpc-linux-gnu-power4,
powerpc64-linux-gnu, and powerpc64le-linux-gnu.
* sysdeps/unix/sysv/linux/libc-vdso.h (VDSO_IFUNC_RET): Define if not
defined.
* sysdeps/unix/sysv/linux/powerpc/get_timebase_freq.c
(__get_timebase_freq): Remove use of
INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK.
(get_timebase_freq_fallback): New symbol.
* sysdeps/unix/sysv/linux/powerpc/gettimeofday.c (time): Use
HAVE_GETTIMEOFDAY_VSYSCALL.
* sysdeps/unix/sysv/linux/powerpc/time.c (gettimeofday): Use
HAVE_TIME_VSYSCALL.
* sysdeps/unix/sysv/linux/powerpc/libc-vdso.h: Include generic
implementation.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep.h
(INTERNAL_VSYSCALL_CALL_TYPE): Make calling convention similar to
powerpc64.
(INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK): Remove macro.
* .../sysv/linux/powerpc/powerpc64/sysdep.h
(INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK): Likewise.
* sysdeps/unix/sysv/linux/powerpc/sysdep.h
(HAVE_GETTIMEOFDAY_VSYSCALL): Define.
Linux vDSO initialization code the internal function pointers require a
lot of duplicated boilerplate over different architectures. This patch
aims to simplify not only the code but the required definition to enable
a vDSO symbol.
The changes are:
1. Consolidate all init-first.c on only one implementation and enable
the symbol based on HAVE_*_VSYSCALL existence.
2. Set the HAVE_*_VSYSCALL to the architecture expected names string.
3. Add a new internal implementation, get_vdso_mangle_symbol, which
returns a mangled function pointer.
Currently the clock_gettime, clock_getres, gettimeofday, getcpu, and time
are handled in an arch-independent way, powerpc still uses some
arch-specific vDSO symbol handled in a specific init-first implementation.
Checked on aarch64-linux-gnu, arm-linux-gnueabihf, i386-linux-gnu,
mips64-linux-gnu, powerpc64le-linux-gnu, s390x-linux-gnu,
sparc64-linux-gnu, and x86_64-linux-gnu.
* sysdeps/powerpc/powerpc32/backtrace.c (is_sigtramp_address,
is_sigtramp_address_rt): Use HAVE_SIGTRAMP_{RT}32 instead of SHARED.
* sysdeps/powerpc/powerpc64/backtrace.c (is_sigtramp_address):
Likewise.
* sysdeps/unix/sysv/linux/aarch64/init-first.c: Remove file.
* sysdeps/unix/sysv/linux/aarch64/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/arm/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/arm/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/mips/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/mips/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/i386/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/riscv/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/riscv/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/s390/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/s390/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/sparc/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/x86/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/aarch64/sysdep.h
(HAVE_CLOCK_GETRES_VSYSCALL, HAVE_CLOCK_GETTIME_VSYSCALL,
HAVE_GETTIMEOFDAY_VSYSCALL): Define value based on kernel exported
name.
* sysdeps/unix/sysv/linux/arm/sysdep.h (HAVE_CLOCK_GETTIME_VSYSCALL,
HAVE_GETTIMEOFDAY_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/i386/sysdep.h (HAVE_CLOCK_GETTIME_VSYSCALL,
HAVE_GETTIMEOFDAY_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/mips/sysdep.h (HAVE_CLOCK_GETTIME_VSYSCALL,
HAVE_GETTIMEOFDAY_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/powerpc/sysdep.h
(HAVE_CLOCK_GETRES_VSYSCALL, HAVE_CLOCK_GETTIME_VSYSCALL,
HAVE_GETCPU_VSYSCALL, HAVE_TIME_VSYSCALL, HAVE_GET_TBFREQ,
HAVE_SIGTRAMP_RT64, HAVE_SIGTRAMP_32, HAVE_SIGTRAMP_RT32i,
HAVE_GETTIMEOFDAY_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/riscv/sysdep.h (HAVE_CLOCK_GETRES_VSYSCALL,
HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL,
HAVE_GETCPU_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/s390/sysdep.h (HAVE_CLOCK_GETRES_VSYSCALL,
HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL,
HAVE_GETCPU_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/sparc/sysdep.h (HAVE_CLOCK_GETTIME_VSYSCALL,
HAVE_GETTIMEOFDAY_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/x86_64/sysdep.h
(HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL,
HAVE_GETCPU_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/dl-vdso.h (VDSO_NAME, VDSO_HASH): Define to
invalid names if architecture does not define them.
(get_vdso_mangle_symbol): New symbol.
* sysdeps/unix/sysv/linux/init-first.c: New file.
* sysdeps/unix/sysv/linux/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/init-first.c (gettimeofday,
clock_gettime, clock_getres, getcpu, time): Remove declaration.
(__libc_vdso_platform_setup_arch): Likewise and use
get_vdso_mangle_symbol to setup vDSO symbols.
(sigtramp_rt64, sigtramp32, sigtramp_rt32, get_tbfreq): Add
attribute_hidden.
* sysdeps/unix/sysv/linux/powerpc/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/sysdep-vdso.h (VDSO_SYMBOL): Remove
definition.
Fix a small error in the HP_TIMING_PRINT trailing zero setting; the '\0'
should be set at MIN(Len,string length), instead of always at the 'Len'
position.
* sysdeps/generic/hp-timing-common.h (HP_TIMING_PRINT): Correct
position of string null termination.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
On alpha, Linux kernel 5.1 added the standard getegid, geteuid and
getppid syscalls (commit ecf7e0a4ad15287). Up to now alpha was using
the corresponding OSF1 syscalls through:
- sysdeps/unix/alpha/getegid.S
- sysdeps/unix/alpha/geteuid.S
- sysdeps/unix/alpha/getppid.S
When building against kernel headers >= 5.1, the glibc now use the new
syscalls through sysdeps/unix/sysv/linux/syscalls.list. When it is then
used with an older kernel, the corresponding 3 functions fail.
A quick fix is to move the OSF1 wrappers under the
sysdeps/unix/sysv/linux/alpha directory so they override the standard
linux ones. A better fix would be to try the new syscalls and fallback
to the old OSF1 in case the new ones fail. This can be implemented in
a later commit.
Changelog:
[BZ #24986]
* sysdeps/unix/alpha/getegid.S: Move to ...
* sysdeps/unix/sysv/linux/alpha/getegid.S: ... here.
* sysdeps/unix/alpha/geteuid.S: Move to ...
* sysdeps/unix/sysv/linux/alpha/geteuid.S: ... here.
* sysdeps/unix/alpha/getppid.S: Move to ...
* sysdeps/unix/sysv/linux/alpha/getppid.S: ... here
Add a macro to linux/kernel-features.h, __ASSUME_TIME64_SYSCALLS, to
indicate whether the kernel can be assumed to provide a set of system
calls that process 64-bit time_t.
__ASSUME_TIME64_SYSCALLS does not indicate whether time_t is actually
64 bits (that's __TIMEBITS) and also does not indicate whether the
64-bit time_t system calls have "time64" suffixes on their names.
Code that uses __ASSUME_TIME64_SYSCALLS will be added in subsequent
patches.
* sysdeps/unix/sysv/linux/kernel-features.h
(__ASSUME_TIME64_SYSCALLS): New macro.
Reviewed-by: Alistair Francis <alistair23@gmail.com>
Reviewed-by: Joseph Myers <joseph@codesourcery.com>
Reviewed-by: Zack Weinberg <zackw@panix.com>
In glibc 2.17, the functions clock_getcpuclockid, clock_getres,
clock_gettime, clock_nanosleep, and clock_settime were moved from
librt.so to libc.so, leaving compatibility stubs behind. Now that the
dynamic linker no longer insists on finding versioned symbols in the
same library that originally defined them, we do not need the stubs
anymore, and this means we don't need GLIBC_PRIVATE __-prefix aliases
for most of the functions anymore either. (clock_gettime still needs
one.) For ports added before 2.17, libc.so needs to provide two
symbol versions for each, the default at GLIBC_2.17 plus a compat
version matching what librt had.
While I'm at it, move the clock_*.c files and their tests from rt/ to
time/.
Use the generic C memset/memcpy/memmove in benchtests since comparing
against a slow byte-oriented implementation makes no sense.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-08-29 Wilco Dijkstra <wdijkstr@arm.com>
* benchtests/bench-memcpy.c (simple_memcpy): Remove.
(generic_memcpy): Include generic C memcpy.
* benchtests/bench-memmove.c (simple_memmove): Remove.
(generic_memmove): Include generic C memmove.
* benchtests/bench-memset.c (simple_memset): Remove.
(generic_memset): Include generic C memset.
* benchtests/bench-memset-large.c (simple_memset): Remove.
(generic_memset): Include generic C memset.
* benchtests/bench-memset-walk.c (simple_memset): Remove.
(generic_memset): Include generic C memset.
* string/memcpy.c (MEMCPY): Add defines to enable redirection.
* string/memset.c (MEMSET): Likewise.
* sysdeps/x86_64/memcopy.h: Remove empty file.
* sysdeps/mach/hurd/i386/sigreturn.c (__sigreturn2): New function,
unlocks SS and returns to the saved PC.
(__sigreturn): Do not unlock SS, and "return" into __sigreturn2 on the
thread stack instead of the saved PC.
Optimizing anonymous maps brings bugs, and does not optimize much anyway.
[BZ #19903]
* sysdeps/mach/hurd/mmap.c (__mmap): Remove optimizing anonymous maps
as __vm_allocate.
To be efficient, the remap translator simply returns ports from the underlying
filesystem, and thus the root directory found through browsing '..' is the
underlying root, not the remap root. This should not be a reason for getcwd to
fail.
* sysdeps/mach/hurd/getcwd.c (_hurd_canonicalize_directory_name_internal): Do
not remove the heading slash if we got an unknown root directory.
(__getcwd): Do not fail with EGRATUITOUS if we got an unknown root directory.
The preemptor sigcode doesn't match since the POSIX sigcode SI_TIMER is
used when SIGALRM is sent. In addition, The inline version of
hurd_preempt_signals doesn't update _hurdsig_preempted_set. For these
reasons, the preemptor would be skipped by post_signal.
* sysdeps/mach/hurd/setitimer.c (setitimer_locked): Fix preemptor setup.
This patch is a reimplementation of [1], which was submitted back in
2015. Copyright issue has been sorted [2] last year. It proposed a new
section (.gnu.xhash) and related dynamic tag (GT_GNU_XHASH). The new
section would be virtually identical to the existing .gnu.hash except
for the translation table (xlat) which would contain correct MIPS
.dynsym indexes corresponding to the hashvals in chains. This is because
MIPS ABI imposes a different ordering of the dynsyms than the one
expected by the .gnu.hash section. Another addition would be a leading
word at the beggining of the section, which would contain the number of
entries in the translation table.
In this patch, the new section name and dynamic tag are changed to
reflect the fact that the section should be treated as MIPS specific
(.MIPS.xhash and DT_MIPS_XHASH).
This patch addresses the alignment issue reported in [3] which is caused
by the leading word of the .MIPS.xhash section. Leading word is now
removed in the corresponding binutils patch, and the number of entries
in the translation table is computed using DT_MIPS_SYMTABNO dynamic tag.
Since the MIPS specific dl-lookup.c file was removed following the
initial patch submission, I opted for the definition of three new macros
in the generic ldsodefs.h. ELF_MACHINE_GNU_HASH_ADDRIDX defines the
index of the dynamic tag in the l_info array. ELF_MACHINE_HASH_SYMIDX is
used to calculate the index of a symbol in GNU hash. On MIPS, it is
defined to look up the symbol index in the translation table.
ELF_MACHINE_XHASH_SETUP is defined for MIPS only. It initializes the
.MIPS.xhash pointer in the link_map_machine struct.
The other major change is bumping the highest EI_ABIVERSION value for
MIPS to suggest that the dynamic linker now supports GNU hash.
The patch was tested by running the glibc testsuite for the three MIPS
ABIs (o32, n32 and n64) and for x86_64-linux-gnu.
[1] https://sourceware.org/ml/binutils/2015-10/msg00057.html
[2] https://sourceware.org/ml/binutils/2018-03/msg00025.html
[3] https://sourceware.org/ml/binutils/2016-01/msg00006.html
* elf/dl-addr.c (determine_info): Calculate the symbol index
using the newly defined ELF_MACHINE_HASH_SYMIDX macro.
* elf/dl-lookup.c (do_lookup_x): Ditto.
(_dl_setup_hash): Initialize MIPS xhash translation table.
* elf/elf.h (SHT_MIPS_XHASH): New define.
(DT_MIPS_XHASH): New define.
* sysdeps/generic/ldsodefs.h (ELF_MACHINE_GNU_HASH_ADDRIDX): New
define.
(ELF_MACHINE_HASH_SYMIDX): Ditto.
(ELF_MACHINE_XHASH_SETUP): Ditto.
* sysdeps/mips/ldsodefs.h (ELF_MACHINE_GNU_HASH_ADDRIDX): New
define.
(ELF_MACHINE_HASH_SYMIDX): Ditto.
(ELF_MACHINE_XHASH_SETUP): Ditto.
* sysdeps/mips/linkmap.h (struct link_map_machine): New member.
* sysdeps/unix/sysv/linux/mips/ldsodefs.h: Increment valid ABI
version.
* sysdeps/unix/sysv/linux/mips/libc-abis: New ABI version.
The fix for BZ#18231 requires new symbols only for sh4eb. This patch
adds the required folder and files for both BE and LE abilist. No
semantic changes are expected.
Checked with check-abi for sh4eb-linux-gnu and sh4-linux-gnu.
* sysdeps/sh/preconfigure.ac: New file.
* sysdeps/sh/preconfigure: Regenerate.
* sysdeps/sh/be/sh3/Implies: New file.
* sysdeps/sh/be/sh4/Implies: Likewise.
* sysdeps/sh/le/sh3/Implies: Likewise.
* sysdeps/sh/le/sh4/Implies: Likewise.
* sysdeps/unix/sysv/linux/sh/le/sh3/Implies: Likewise.
* sysdeps/unix/sysv/linux/sh/le/sh4/Implies: Likewise.
* sysdeps/unix/sysv/linux/sh/*.abilist: Move to
sysdeps/unix/sysv/linux/sh/le/*.abilist.
* sysdeps/unix/sysv/linux/sh/be/*.abilist: New files.
The fix for BZ#18231 requires new symbols only for microblaze. This patch
adds the required folder and files for both BE and LE abilist. No semantic
changes are expected.
Checked with check-abi for microblaze-linux-gnueabihf and
microblazeel-linux-gnueabihf.
* sysdeps/microblaze/preconfigure.ac: New file.
* sysdeps/microblaze/preconfigure: Regenerate.
* sysdeps/microblaze/be/implies: New file.
* sysdeps/microblaze/le/implies: Likewise.
* sysdeps/unix/sysv/linux/microblaze/be/implies: Likewise.
* sysdeps/unix/sysv/linux/microblaze/le/implies: Likewise.
* sysdeps/unix/sysv/linux/microblaze/*.abilist. Move to
sysdeps/unix/sysv/linux/microblaze/be/*.abilist.
* sysdeps/unix/sysv/linux/microblaze/le/*.abilist: New files.
The fix for BZ#18231 requires new symbols only for armeb. This patch
adds the required folder and files for both BE and LE abilist. No
semantic changes are expected.
Checked with check-abi for arm-linux-gnueabihf and armeb-linux-gnueabihf.
* sysdeps/arm/preconfigure.ac: Set machine based on endianness.
* sysdeps/arm/preconfigure: Regenerate.
* sysdeps/arm/be/Implies: New file.
* sysdeps/arm/be/armv6/Implies: Likewise.
* sysdeps/arm/be/armv6t2/Implies: Likewise.
* sysdeps/arm/be/armv7/Implies: Likewise.
* sysdeps/arm/le/Implies: Likewise.
* sysdeps/unix/sysv/linux/arm/be/Implies: Likewise.
* sysdeps/unix/sysv/linux/arm/le/Implies: Likewise.
* sysdeps/unix/sysv/linux/arm/*.abilist: Move to
sysdeps/unix/sysv/linux/arm/le/*.abilist.
* sysdeps/unix/sysv/linux/arm/be/l*.abilist: New files.
fegetenv_status() wants to use the lighter weight instruction 'mffsl'
for reading the Floating-Point Status and Control Register (FPSCR).
It currently will use it directly if compiled '-mcpu=power9', and will
perform a runtime check (cpu_supports("arch_3_00")) otherwise.
Nicely, it turns out that the 'mffsl' instruction will decode to
'mffs' on architectures older than "arch_3_00" because the additional
bits set for 'mffsl' are "don't care" for 'mffs'. 'mffs' is a superset
of 'mffsl'.
So, just generate 'mffsl'.
fesetenv() reads the current value of the Floating-Point Status and Control
Register (FPSCR) to determine the difference between the current state of
exception enables and the newly requested state. All of these bits are also
returned by the lighter weight 'mffsl' instruction used by fegetenv_status().
Use that instead.
Also, remove a local macro _FPU_MASK_ALL in favor of a common macro,
FPU_ENABLES_MASK from fenv_libc.h.
Finally, use a local variable ('new') in favor of a pointer dereference
('*envp').
SET_RESTORE_ROUND uses libc_feholdsetround_ppc_ctx and
libc_feresetround_ppc_ctx to bracket a block of code where the floating point
rounding mode must be set to a certain value.
For the *prologue*, libc_feholdsetround_ppc_ctx is used and performs:
1. Read/save FPSCR.
2. Create new value for FPSCR with new rounding mode and enables cleared.
3. If new value is different than current value,
a. If transitioning from a state where some exceptions enabled,
enter "ignore exceptions / non-stop" mode.
b. Write new value to FPSCR.
c. Put a mark on the wall indicating the FPSCR was changed.
(1) uses the 'mffs' instruction. On POWER9, the lighter weight 'mffsl'
instruction can be used, but it doesn't return all of the bits in the FPSCR.
fegetenv_status uses 'mffsl' on POWER9, 'mffs' otherwise, and can thus be
used instead of fegetenv_register.
(3b) uses 'mtfsf 0b11111111' to write the entire FPSCR, so it must
instead use 'mtfsf 0b00000011' to write just the enables and the mode,
because some of the rest of the bits are not valid if 'mffsl' was used.
fesetenv_mode uses 'mtfsf 0b00000011' on POWER9, 'mtfsf 0b11111111'
otherwise.
For the *epilogue*, libc_feresetround_ppc_ctx checks the mark on the wall, then
calls libc_feresetround_ppc, which just calls __libc_femergeenv_ppc with
parameters such that it performs:
1. Retreive saved value of FPSCR, saved in prologue above.
2. Read FPSCR.
3. Create new value of FPSCR where:
- Summary bits and exception indicators = current OR saved.
- Rounding mode and enables = saved.
- Status bits = current.
4. If transitioning from some exceptions enabled to none,
enter "ignore exceptions / non-stop" mode.
5. If transitioning from no exceptions enabled to some,
enter "catch exceptions" mode.
6. Write new value to FPSCR.
The summary bits are hardwired to the exception indicators, so there is no
need to restore any saved summary bits.
The exception indicator bits, which are sticky and remain set unless
explicitly cleared, would only need to be restored if the code block
might explicitly clear any of them. This is certainly not expected.
So, the only bits that need to be restored are the enables and the mode.
If it is the case that only those bits are to be restored, there is no need to
read the FPSCR. Steps (2) and (3) are unnecessary, and step (6) only needs to
write the bits being restored.
We know we are transitioning out of "ignore exceptions" mode, so step (4) is
unnecessary, and in step (6), we only need to check the state we are
entering.
Since fe{en,dis}ableexcept() and fesetmode() read-modify-write just the
"mode" (exception enable and rounding mode) bits of the Floating Point Status
Control Register (FPSCR), the lighter weight 'mffsl' instruction can be used
to read the FPSCR (enables and rounding mode), and 'mtfsf 0b00000011' can be
used to write just those bits back to the FPSCR. The net is better performance.
In addition, fe{en,dis}ableexcept() read the FPSCR again after writing it, or
they determine that it doesn't need to be written because it is not changing.
In either case, the local variable holds the current values of the enable
bits in the FPSCR. This local variable can be used instead of again reading
the FPSCR.
Also, that value of the FPSCR which is read the second time is validated
against the requested enables. Since the write can't fail, this validation
step is unnecessary, and can be removed. Instead, the exceptions to be
enabled (or disabled) are transformed into available bits in the FPSCR,
then validated after being transformed back, to ensure that all requested
bits are actually being set. For example, FE_INVALID_SQRT can be
requested, but cannot actually be set. This bit is not mapped during the
transformations, so a test for that bit being set before and after
transformations will show the bit would not be set, and the function will
return -1 for failure.
Finally, convert the local macros in fesetmode.c to more generally useful
macros in fenv_libc.h.
The exceptions passed to fe{en,dis}ableexcept() are defined in the ABI
as a bitmask, a combination of FE_INVALID, FE_OVERFLOW, etc.
Within the functions, these bits must be translated to/from the corresponding
enable bits in the Floating Point Status Control Register (FPSCR).
This translation is currently done bit-by-bit. The compiler generates
a series of conditional bit operations. Nicely, the "FE" exception
bits are all a uniform offset from the FPSCR enable bits, so the bit-by-bit
operation can instead be performed by a shift with appropriate masking.
Move non-ASCII contributor names from installed headers
into contrib.texi when possible, and when it's not (the
copyright notice in sysdeps/unix/sysv/linux/mips/sys/user.h)
go back to ASCIIfied names. Problem reported by Joseph Myers in:
https://www.sourceware.org/ml/libc-alpha/2019-08/msg00646.html
This bumps the highest valid EI_ABIVERSION value to ABSOLUTE ABI.
New testcase loads the symbol from the GOT with the "lb" instruction
so that the EI_ABIVERSION header field of the shared object is set
to ABSOLUTE (it doesn't actually check the value of the symbol), and
makes sure that the main executable is executed without "ABI version
invalid" error.
Tested for all three ABIs (o32, n32, n64) using both static linker which
handles undefined weak symbols correctly [1] (and sets the EI_ABIVERSION
of the test module) and the one that doesn't (EI_ABIVERSION left as 0).
[1] https://sourceware.org/ml/binutils/2018-07/msg00268.html
[BZ #24916]
* sysdeps/mips/Makefile [$(subdir) = elf] (tests): Add
tst-undefined-weak.
[$(subdir) = elf] (modules-names): Add tst-undefined-weak-lib.
[$(subdir) = elf] ($(objpfx)tst-undefined-weak): Add dependency.
* sysdeps/mips/tst-undefined-weak-lib.S: New file.
* sysdeps/mips/tst-undefined-weak.c: Likewise.
* sysdeps/unix/sysv/linux/mips/ldsodefs.h (VALID_ELF_ABIVERSION):
Increment highest valid ABIVERSION value.
Linux/Mips kernels prior to 4.8 could potentially crash the user
process when doing FPU emulation while running on non-executable
user stack.
Currently, gcc doesn't emit .note.GNU-stack for mips, but that will
change in the future. To ensure that glibc can be used with such
future gcc, without silently resulting in binaries that might crash
in runtime, this patch forces RWX stack for all built objects if
configured to run against minimum kernel version less than 4.8.
* sysdeps/unix/sysv/linux/mips/Makefile
(test-xfail-check-execstack):
Move under mips-has-gnustack != yes.
(CFLAGS-.o*, ASFLAGS-.o*): New rules.
Apply -Wa,-execstack if mips-force-execstack == yes.
* sysdeps/unix/sysv/linux/mips/configure: Regenerated.
* sysdeps/unix/sysv/linux/mips/configure.ac
(mips-force-execstack): New var.
Set to yes for hard-float builds with minimum_kernel < 4.8.0
or minimum_kernel not set at all.
(mips-has-gnustack): New var.
Use value of libc_cv_as_noexecstack
if mips-force-execstack != yes, otherwise set to no.
As indicated by Joseph's comment on BZ#17726, this symbol is most
likely a historical ABI accident. This patch make it on both arm
and sparc ABIs a compat_symbol.
Checked against a build arm-linux-gnueabihf, sparcv9-linux-gnu, adn
sparc64-linux-gnu to see if the symbol is still present.
* gmon/Versions (libc) [GLIBC_2.31]: New entry.
* sysdeps/unix/sysv/linux/arm/profil-counter.h (profil_counter):
Make a compat_symbol.
* sysdeps/unix/sysv/linux/sparc/profil-counter.h
(__profil_counter_global): Likewise.
This patch refactor sigcontextinfo.h header to use SA_SIGINFO as default
for both gmon and debug implementations. This allows simplify
profil-counter.h on Linux to use a single implementation and remove the
requirements for newer ports to redefine __sigaction/sigaction to use
SA_SIGINFO.
The GET_PC macro is also replaced with a function sigcontext_get_pc that
returns an uintptr_t instead of a void pointer. It allows easier convertion
to integer on ILP32 architecture, such as x32, without the need to suppress
compiler warnings.
The patch also requires some refactor of register-dump.h file for some
architectures (to reflect it is now called from a sa_sigaction instead of
sa_handler signal context).
- Alpha, i386, and s390 are straighfoward to take in consideration the
new argument type.
- ia64 takes in consideration the kernel pass a struct sigcontextt
as third argument for sa_sigaction.
- sparc take in consideration the kernel pass a pt_regs struct
as third argument for sa_sigaction.
- m68k dummy function is removed and the FP state is dumped on
register_dump itself.
- For SH the register-dump.h file is consolidate on a common implementation
and the floating-point state is checked based on ownedfp field.
The register_dump does not change its output format in any affected
architecture.
I checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu,
arm-linux-gnueabihf, sparcv9-linux-gnu, sparc64-linux-gnu, powerpc-linux-gnu,
powerpc64-linux-gnu, and powerpc64le-linux-gnu.
I also checked the libSegFault.so through catchsegv on alpha-linux-gnu,
m68k-linux-gnu and sh4-linux-gnu to confirm the output has not changed.
Adhemerval Zanella <adhemerval.zanella@linaro.org>
Florian Weimer <fweimer@redhat.com>
* debug/segfault.c (install_handler): Use SA_SIGINFO if defined.
* sysdeps/generic/profil-counter.h (__profil_counter): Cast to
uintptr_t.
* sysdeps/generic/sigcontextinfo.h (GET_PC): Rename to
sigcontext_get_pc and return aligned cast to uintptr_t.
* sysdeps/mach/hurd/i386/sigcontextinfo.h (GET_PC): Likewise.
* sysdeps/posix/profil.c (profil_count): Change PC argument to
uintptr_t.
(__profil): Use SA_SIGINFO.
* sysdeps/posix/sprofil.c (profil_count): Change PCP argument to
uintptr_t.
(__sprofil): Use SA_SIGINFO.
* sysdeps/unix/sysv/linux/profil-counter.h: New file.
* sysdeps/unix/sysv/linux/aarch64/profil-counter.h: Remove file.
* sysdeps/unix/sysv/linux/csky/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/hppa/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/i386/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/ia64/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/microblaze/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/mips/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/nios2/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/riscv/profil-counter.h: Likewise.
* sysdeps/sysv/linux/s390/s390-32/profil-counter.h: Likewise.
* sysdeps/sysv/linux/s390/s390-64/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/sh/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/arm/profil-counter.h (__profil_counter):
Assume SA_SIGINFO and use sigcontext_get_pc instead of GET_PC.
* sysdeps/unix/sysv/linux/sparc/profil-counter.h: New file.
* sysdeps/unix/sysv/linux/sparc/sparc64/profil-counter.h: Remove file.
* sysdeps/unix/sysv/linux/sparc/sparc32/profil-counter.h: Likewise.
* sysdpes/unix/sysv/linux/aarch64/sigcontextinfo.h (SIGCONTEXT,
GET_PC, __sigaction, sigaction): Remove defines.
(sigcontext_get_pc): New function.
* sysdeps/unix/sysv/linux/alpha/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/arm/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/csky/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/hppa/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/i386/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/ia64/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/m68k/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/mips/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/nios2/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/s390/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/microblaze/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/riscv/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/sh/sigcontextinfo.h: Likewise.
* sysdeps/sysv/linux/sparc/sparc32/sigcontextinfo.h: Likewise.
* sysdeps/sysv/linux/sparc/sparc64/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/sigcontextinfo.h: Likewise.
* sysdeps/unix/sysv/linux/alpha/register-dump.h (register_dump):
Handle CTX argument as ucontext_t.
* sysdeps/unix/sysv/linux/i386/register-dump.h: Likewise.
Likewise.
* sysdeps/unix/sysv/linux/m68k/register-dump.h: Likewise.
* sysdeps/sysv/linux/s390/s390-32/register-dump.h: Likewise.
* sysdeps/sysv/linux/s390/s390-64/register-dump.h: Likewise.
* sysdeps/unix/sysv/linux/sh/register-dump.h: New file.
* sysdeps/unix/sysv/linux/sh/sh4/register-dump.h: Remove File.
* sysdeps/unix/sysv/linux/sh/sh3/register-dump.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/register-dump.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/register-dump.h: Likewise.
* sysdeps/unix/sysv/linux/Makefile (tests-internal): Add
tst-sigcontextinfo-get_pc.
* sysdeps/unix/sysv/linux/tst-sigcontextinfo-get_pc.c: New file.
(CFLAGS-tst-sigcontextinfo-get_pc.c): New rule.
Fix a couple of typos and v_regs field name in mcontext_t.
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h: Fix typos and
field name in mcontext_t struct.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
It doesn't make sense to remove all the internal uses of time.
It's still a standard ISO C function, and its callers don't need
sub-second resolution and would be unnecessarily complicated if
they had to declare a struct timespec instead of just a time_t.
However, a handful of places were using the vestigial "result"
argument instead of the return value, which is slightly less
efficient and also looks strange. Correct this.
* misc/syslog.c (__vsyslog_internal)
* time/getdate.c (__getdate_r)
* time/tst_wcsftime.c (main):
Use return value of time, not its argument.
* string/strfry.c (strfry)
* sysdeps/mach/sleep.c (__sleep):
Remove unnecessary casts of NULL in calls to time.
If the process is in a bad state, we used to print backtraces in
many cases. This is problematic because doing so could involve
a lot of work, like loading libgcc_s using the dynamic linker,
and this could itself be targeted by exploit writers. For example,
if the crashing process was forked from a long-lived process, the
addresses in the error message could be used to bypass ASLR.
Commit ed421fca42 ("Avoid backtrace from
__stack_chk_fail [BZ #12189]"), backtraces where no longer printed
because backtrace_and_maps was always called with do_abort == 1.
Rather than fixing this logic error, this change removes the backtrace
functionality from the sources. With the prevalence of external crash
handlers, it does not appear to be particularly useful. The crash
handler may also destroy useful information for debugging.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The resolution of C floating-point Clarification Request 25
<http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2397.htm#dr_25> is
that the totalorder and totalordermag functions should take pointer
arguments, and this has been adopted in C2X (with const added; note
that the integration of this change into C2X is present in the C
standard git repository but postdates the most recent public PDF
draft).
This patch updates glibc accordingly. As a defect resolution, the API
is changed unconditionally rather than supporting any sort of TS
18661-1 mode for compilation with the old version of the API. There
are compat symbols for existing binaries that pass floating-point
arguments directly. As a consequence of changing to pointer
arguments, there are no longer type-generic macros in tgmath.h for
these functions.
Because of the fairly complicated logic for creating libm function
aliases and determining the set of aliases to create in a given glibc
configuration, rather than duplicating all that in individual source
files to create the versioned and compat symbols, the source files for
the various versions of totalorder functions are set up to redefine
weak_alias before using libm_alias_* macros to create the symbols
required. In turn, this requires creating a separate alias for each
symbol version pointing to the same implementation (see binutils bug
<https://sourceware.org/bugzilla/show_bug.cgi?id=23840>), which is
done automatically using __COUNTER__. (As I noted in
<https://sourceware.org/ml/libc-alpha/2018-10/msg00631.html>, it might
well make sense for glibc's symbol versioning macros to do that alias
creation with __COUNTER__ themselves, which would somewhat simplify
the logic in the totalorder source files.)
It is of course desirable to test the compat symbols. I did this with
the generic libm-test machinery, but didn't wish to duplicate the
actual tables of test inputs and outputs, and thought it risky to
attempt to have a single object file refer to both default and compat
versions of the same function in order to test them together. Thus, I
created libm-test-compat_totalorder.inc and
libm-test-compat_totalordermag.inc which include the generated .c
files (with the processed version of those tables of inputs) from the
non-compat tests, and added appropriate dependencies. I think this
provides sufficient test coverage for the compat symbols without also
needing to make the special ldbl-96 and ldbl-128ibm tests (of
peculiarities relating to the representations of those formats that
can't be covered in the generic tests) run for the compat symbols.
Tests of compat symbols need to be internal tests, meaning _ISOMAC is
not defined. Making some libm-test tests into internal tests showed
up two other issues. GCC diagnoses duplicate macro definitions of
__STDC_* macros, including __STDC_WANT_IEC_60559_TYPES_EXT__; I added
an appropriate conditional and filed
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=91451> for this issue.
On ia64, include/setjmp.h ends up getting included indirectly from
libm-symbols.h, resulting in conflicting definitions of the STR macro
(also defined in libm-test-driver.c); I renamed the macros in
include/setjmp.h. (It's arguable that we should have common internal
headers used everywhere for stringizing and concatenation macros.)
Tested for x86_64 and x86, and with build-many-glibcs.py.
* math/bits/mathcalls.h
[__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN]
(totalorder): Take pointer arguments.
[__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN]
(totalordermag): Likewise.
* manual/arith.texi (totalorder): Likewise.
(totalorderf): Likewise.
(totalorderl): Likewise.
(totalorderfN): Likewise.
(totalorderfNx): Likewise.
(totalordermag): Likewise.
(totalordermagf): Likewise.
(totalordermagl): Likewise.
(totalordermagfN): Likewise.
(totalordermagfNx): Likewise.
* math/tgmath.h (__TGMATH_BINARY_REAL_RET_ONLY): Remove macro.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag): Likewise.
* math/Versions (GLIBC_2.31): Add totalorder, totalorderf,
totalorderl, totalordermag, totalordermagf, totalordermagl,
totalorderf32, totalorderf64, totalorderf32x, totalordermagf32,
totalordermagf64, totalordermagf32x, totalorderf64x,
totalordermagf64x, totalorderf128 and totalordermagf128.
* math/Makefile (libm-test-funcs-noauto): Add compat_totalorder
and compat_totalordermag.
(libm-test-funcs-compat): New variable.
(libm-tests-compat): Likewise.
(tests): Do not include compat tests.
(tests-internal): Add compat tests.
($(foreach t,$(libm-tests-base),
$(objpfx)$(t)-compat_totalorder.o)): Depend
on $(objpfx)libm-test-totalorder.c.
($(foreach t,$(libm-tests-base),
$(objpfx)$(t)-compat_totalordermag.o): Depend on
$(objpfx)libm-test-totalordermag.c.
(tgmath3-macros): Remove totalorder and totalordermag.
* math/libm-test-compat_totalorder.inc: New file.
* math/libm-test-compat_totalordermag.inc: Likewise.
* math/libm-test-driver.c (struct test_ff_i_data): Update comment.
(RUN_TEST_fpfp_b): New macro.
(RUN_TEST_LOOP_fpfp_b): Likewise.
* math/libm-test-totalorder.inc (totalorder_test_data): Use
TEST_fpfp_b.
(totalorder_test): Condition on [!COMPAT_TEST].
(do_test): Likewise.
* math/libm-test-totalordermag.inc (totalordermag_test_data): Use
TEST_fpfp_b.
(totalordermag_test): Condition on [!COMPAT_TEST].
(do_test): Likewise.
* math/gen-tgmath-tests.py (Tests.add_all_tests): Remove
totalorder and totalordermag.
* math/test-tgmath.c (NCALLS): Change to 132.
(F(compile_test)): Do not call totalorder or totalordermag.
(F(totalorder)): Remove.
(F(totalordermag)): Likewise.
* include/float.h (__STDC_WANT_IEC_60559_TYPES_EXT__): Do not
define if [__STDC_WANT_IEC_60559_TYPES_EXT__].
* include/setjmp.h [!_ISOMAC] (STR_HELPER): Rename to
SJSTR_HELPER.
[!_ISOMAC] (STR): Rename to SJSTR. Update call to STR_HELPER.
[!_ISOMAC] (TEST_SIZE): Update call to STR.
[!_ISOMAC] (TEST_ALIGN): Likewise.
[!_ISOMAC] (TEST_OFFSET): Likewise.
* sysdeps/ieee754/dbl-64/s_totalorder.c: Include <shlib-compat.h>
and <first-versions.h>.
(__totalorder): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/dbl-64/s_totalordermag.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermag): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalorder): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermag): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/float128/float128_private.h
(__totalorder_compatl): New macro.
(__totalordermag_compatl): Likewise.
* sysdeps/ieee754/flt-32/s_totalorderf.c: Include <shlib-compat.h>
and <first-versions.h>.
(__totalorderf): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/flt-32/s_totalordermagf.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermagf): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-128/s_totalorderl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalorderl): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/ldbl-128/s_totalordermagl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermagl): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Include
<shlib-compat.h>.
(__totalorderl): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c: Include
<shlib-compat.h>.
(__totalordermagl): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-96/s_totalorderl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalorderl): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/ldbl-96/s_totalordermagl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermagl): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c (totalorderl): Take
pointer arguments.
* sysdeps/ieee754/ldbl-opt/nldbl-totalordermag.c (totalordermagl):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c
(do_test): Update calls to totalorderl and totalordermagl.
* sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c (do_test):
Update calls to totalorderl and totalordermagl.
* sysdeps/mach/hurd/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/csky/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
Commit 7532837d7b ("The
-Wstringop-truncation option new in GCC 8 detects common misuses")
added __attribute_nonstring__ to bits/utmp.h, but it did not update
the parallel bits/utmpx.h header. In struct utmp, the nonstring
attribute for ut_id was missing.
* sysdeps/aarch64/multiarch/memset_base64.S (DC_ZVA_THRESHOLD):
Disable DC ZVA code if this macro is defined as zero.
* sysdeps/aarch64/multiarch/memset_emag.S (DC_ZVA_THRESHOLD):
Change to zero to disable using DC ZVA.
This patch adds the SYNC_FILE_RANGE_WRITE_AND_WAIT constant from Linux
5.2 (a new name for a combination of existing bits, not actually a new
kernel interface) to bits/fcntl-linux.h.
Tested for x86_64.
* sysdeps/unix/sysv/linux/bits/fcntl-linux.h [__USE_GNU]
(SYNC_FILE_RANGE_WRITE_AND_WAIT): New macro.
The commit 5e855c8954
"s390: Enable VDSO for static linking" removed the definition of VDSO_SETUP
which leads to not setup the vdso symbols.
Instead it jumps to false addresses.
This patch just re adds the removed VDSO_SETUP macro definition.
ChangeLog:
* sysdeps/unix/sysv/linux/s390/init-first.c (VDSO_SETUP): New define.
This patch adds the CLONE_PIDFD constant from Linux 5.2 to glibc's
bits/sched.h.
Tested for x86_64.
* sysdeps/unix/sysv/linux/bits/sched.h [__USE_GNU] (CLONE_PIDFD):
New macro.
This patch assumes static vDSO is supported as default, it is now supported
on all current architectures that support vDSO. It allows removing both
ALWAYS_USE_VSYSCALL define, which an architecture requires to explicit define
and USE_VSYSCALL (which defines vDSO only for shared or if architecture defines
ALWAYS_USE_VSYSCALL).
Checked with a build against all affected ABIs.
[BZ #19767]
* sysdeps/unix/sysv/linux/aarch64/sysdep.h (ALWAYS_USE_VSYSCALL):
Remove definition.
* sysdeps/unix/sysv/linux/arm/sysdep.h (ALWAYS_USE_VSYSCALL):
Likewise.
* sysdeps/unix/sysv/linux/i386/sysdep.h (ALWAYS_USE_VSYSCALL):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/sysdep.h (ALWAYS_USE_VSYSCALL):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/sysdep.h
(ALWAYS_USE_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/sysdep.h
(ALWAYS_USE_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep.h
(ALWAYS_USE_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep.h
(ALWAYS_USE_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/riscv/sysdep.h (ALWAYS_USE_VSYSCALL):
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/sysdep.h
(ALWAYS_USE_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/sysdep.h
(ALWAYS_USE_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/sparc/sysdep.h (ALWAYS_USE_VSYSCALL):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/sysdep.h (ALWAYS_USE_VSYSCALL):
Likewise.
* sysdeps/unix/sysv/linux/x86/libc-vdso.h: Remove #if USE_VSYSCALL.
* sysdeps/unix/sysv/linux/sysdep-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/sysdep.h (ALWAYS_USE_VSYSCALL,
USE_VSYSCALL): Remove defitions.
Although s390 only enables vDSO for dynamically linked elf binaries
(arch/s390/kernel/vdso.c:217), there is no indication in the code or
associated commit message for why not enable it for statically linked
binaries as well. To double check, I rebuilt a kernel with the
check removed and the vDSO does work for static build for supplied
symbols.
Checked on s390x-linux-gnu and s390-linux-gnu.
[BZ #19767]
* sysdeps/unix/sysv/linux/s390/init-first.c: Remove #ifdef SHARED.
* sysdeps/unix/sysv/linux/s390/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/sysdep.h
(ALWAYS_USE_VSYSCALL): Define.
* sysdeps/unix/sysv/linux/s390/s390-64/sysdep.h
(ALWAYS_USE_VSYSCALL): Likewise.
There is just one file-based implementation, so this dispatch
mechanism is unnecessary. Instead of the vtable pointer
__libc_utmp_jump_table, use a non-negative file_fd as the indicator
that the backend is initialized.
This patch updates the Linux kernel version in a comment in
syscall-names.list to agree with the following "kernel" line.
* sysdeps/unix/sysv/linux/syscall-names.list: Update comment.
The tst-mman-consts.py test includes a kernel version number, to avoid
failures because of newly added constants in the kernel (if kernel
headers are newer than this version of glibc) or missing constants in
the kernel (if kernel headers are older than this version of glibc).
This patch updates it to 5.2 to reflect that the MAP_* constants in
glibc are still current as of that kernel version.
Tested with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/tst-mman-consts.py (main): Update Linux
kernel version number to 5.2.
Some implementations in sysdeps/powerpc/powerpc64/power8/*.S still had
pre power8 compatible binutils hardcoded macros and were not using
.machine power8.
This patch should not have semantic changes, in fact it should have the
same exact code generated.
Tested that generated stripped shared objects are identical when
using "strip --remove-section=.note.gnu.build-id".
Checked on:
- powerpc64le, power9, build-many-glibcs.py, gcc 6.4.1 20180104, binutils 2.26.2.20160726
- powerpc64le, power8, debian 9, gcc 6.3.0 20170516, binutils 2.28
- powerpc64le, power9, ubuntu 19.04, gcc 8.3.0, binutils 2.32
- powerpc64le, power9, opensuse tumbleweed, gcc 9.1.1 20190527, binutils 2.32
- powerpc64, power9, debian 10, gcc 8.3.0, binutils 2.31.1
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
This is missing bit for fully fix BZ#15813 (the other two were fixed
by 359653aaac).
Checked on x86_64-linux-gnu.
[BZ #15813]
sysdeps/posix/tempname.c (__gen_tempname): get entrypy on each
attempt.
Commit ffe8a9a831, "powerpc: Remove
rt_sigreturn usage on context function", removed from powerpc32
swapcontext a setting of r31 that is relied upon in subsequent code.
I'm not sure why this didn't produce test failures in Adhemerval's
32-bit testing; in my (soft-float) testing in preparation for 2.30
release, I see several context-related failures
FAIL: stdlib/tst-makecontext2
FAIL: stdlib/tst-makecontext3
FAIL: stdlib/tst-setcontext
FAIL: stdlib/tst-setcontext2
FAIL: stdlib/tst-setcontext4
FAIL: stdlib/tst-setcontext7
FAIL: stdlib/tst-setcontext9
FAIL: stdlib/tst-swapcontext1
that did not appear in 2.29 testing. This patch restores the removed
register setting in question, and thus fixes those failures.
Tested for powerpc (soft-float).
* sysdeps/unix/sysv/linux/powerpc/powerpc32/swapcontext-common.S
(__CONTEXT_FUNC_NAME): Restore setting of r31.
When compiled with -O3 and AVX, GCC 8 and 9 optimize some loops in
sysdeps/ieee754/dbl-64/branred.c with 256-bit vector instructions,
which leads to store forward stall:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=90579
There is no easy fix in compiler. This patch limits vector width to
128 bits to work around this issue. It improves performance of sin
and cos by more than 40% on Skylake compiled with -O3 -march=skylake.
Tested with GCC 7/8/9 on x86-64.
[BZ #24603]
* sysdeps/x86_64/configure.ac: Check if -mprefer-vector-width=128
works.
* sysdeps/x86_64/configure: Regenerated.
* sysdeps/x86_64/fpu/Makefile (CFLAGS-branred.c): New. Set
to -mprefer-vector-width=128 if supported.
The kernel changes for a 64-bit time_t on 32-bit architectures
resulted in <asm/socket.h> indirectly including <linux/posix_types.h>.
The latter is not namespace-clean for the POSIX version of
<sys/socket.h>.
This issue has persisted across several Linux releases, so this commit
creates our own copy of the SO_* definitions for !__USE_MISC mode.
The new test socket/tst-socket-consts ensures that the copy is
consistent with the kernel definitions (which vary across
architectures). The test is tricky to get right because CPPFLAGS
includes include/libc-symbols.h, which in turn defines _GNU_SOURCE
unconditionally.
Tested with build-many-glibcs.py. I verified that a discrepancy in
the definitions actually results in a failure of the
socket/tst-socket-consts test.
The pthread _clock functions that were recently added to nptl need to be
declared in hppa's pthread.h too. After this change, the function
declaration part of sysdeps/nptl/pthread.h and
sysdeps/unix/sysv/linux/hppa/pthread.h are identical.
* sysdeps/unix/sysv/linux/hppa/pthread.h: Add declarations of
functions recently added to sysdeps/nptl/pthread.h:
pthread_mutex_clocklock, pthread_rwlock_clockrdlock,
pthread_rwlock_clockwrlock and pthread_cond_clockwait.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
In afe4de7d28, I added forwarding functions
from libc to libpthread for __pthread_cond_clockwait and
pthread_cond_clockwait to mirror those for pthread_cond_timedwait. These
are unnecessary[1], since these functions aren't (yet) being called from
within libc itself. Let's remove them.
* nptl/forward.c: Remove unnecessary __pthread_cond_clockwait and
pthread_cond_clockwait forwarding functions. There are no internal
users, so it is unnecessary to expose these functions in libc.so.
* sysdeps/nptl/pthread-functions.h (pthread_functions): Remove
unnecessary ptr___pthread_cond_clockwait member.
* nptl/nptl-init.c (pthread_functions): Remove assignment of
removed member.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
[1] https://sourceware.org/ml/libc-alpha/2017-10/msg00082.html
The only implementation of futex_supports_exact_relative_timeouts always
returns true. Let's remove it and all its callers.
* nptl/pthread_cond_wait.c: (__pthread_cond_clockwait): Remove code
that is only useful if futex_supports_exact_relative_timeouts ()
returns false.
* nptl/pthread_condattr_setclock.c: (pthread_condattr_setclock):
Likewise.
* sysdeps/nptl/futex-internal.h: Remove comment about relative
timeouts potentially being imprecise since it's no longer true.
Remove declaration of futex_supports_exact_relative_timeouts.
* sysdeps/unix/sysv/linux/futex-internal.h: Remove implementation
of futex_supports_exact_relative_timeouts.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Rename lll_timedlock to lll_clocklock and add clockid
parameter to indicate the clock that the abstime parameter should
be measured against in preparation for adding
pthread_mutex_clocklock.
The name change mirrors the naming for the exposed pthread functions:
timed => absolute timeout measured against CLOCK_REALTIME (or clock
specified by attribute in the case of pthread_cond_timedwait.)
clock => absolute timeout measured against clock specified in preceding
parameter.
* sysdeps/nptl/lowlevellock.h (lll_clocklock): Rename from
lll_timedlock and add clockid parameter. (__lll_clocklock): Rename
from __lll_timedlock and add clockid parameter.
* sysdeps/unix/sysv/linux/sparc/lowlevellock.h (lll_clocklock):
Likewise.
* nptl/lll_timedlock_wait.c (__lll_clocklock_wait): Rename from
__lll_timedlock_wait and add clockid parameter. Use __clock_gettime
rather than __gettimeofday so that clockid can be used. This means
that conversion from struct timeval is no longer required.
* sysdeps/sparc/sparc32/lowlevellock.c (lll_clocklock_wait):
Likewise.
* sysdeps/sparc/sparc32/lll_timedlock_wait.c: Update comment to
refer to __lll_clocklock_wait rather than __lll_timedlock_wait.
* nptl/pthread_mutex_timedlock.c (lll_clocklock_elision): Rename
from lll_timedlock_elision, add clockid parameter and use
meaningful names for other parameters. (__pthread_mutex_timedlock):
Pass CLOCK_REALTIME where necessary to lll_clocklock and
lll_clocklock_elision.
* sysdeps/unix/sysv/linux/powerpc/lowlevellock.h
(lll_clocklock_elision): Rename from lll_timedlock_elision and add
clockid parameter. (__lll_clocklock_elision): Rename from
__lll_timedlock_elision and add clockid parameter.
* sysdeps/unix/sysv/linux/s390/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/x86/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/elision-timed.c
(__lll_lock_elision): Call __lll_clocklock_elision rather than
__lll_timedlock_elision. (EXTRAARG): Add clockid parameter.
(LLL_LOCK): Likewise.
* sysdeps/unix/sysv/linux/s390/elision-timed.c: Likewise.
* sysdeps/unix/sysv/linux/x86/elision-timed.c: Likewise.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Add:
int pthread_rwlock_clockrdlock (pthread_rwlock_t *rwlock,
clockid_t clockid,
const struct timespec *abstime)
and:
int pthread_rwlock_clockwrlock (pthread_rwlock_t *rwlock,
clockid_t clockid,
const struct timespec *abstime)
which behave like pthread_rwlock_timedrdlock and
pthread_rwlock_timedwrlock respectively, except they always measure
abstime against the supplied clockid. The functions currently support
CLOCK_REALTIME and CLOCK_MONOTONIC and return EINVAL if any other
clock is specified.
* sysdeps/nptl/pthread.h: Add pthread_rwlock_clockrdlock and
pthread_wrlock_clockwrlock.
* nptl/Makefile: Build pthread_rwlock_clockrdlock.c and
pthread_rwlock_clockwrlock.c.
* nptl/pthread_rwlock_clockrdlock.c: Implement
pthread_rwlock_clockrdlock.
* nptl/pthread_rwlock_clockwrlock.c: Implement
pthread_rwlock_clockwrlock.
* nptl/pthread_rwlock_common.c (__pthread_rwlock_rdlock_full): Add
clockid parameter and verify that it indicates a supported clock on
entry so that we fail even if it doesn't end up being used. Pass
that clock on to futex_abstimed_wait when necessary.
(__pthread_rwlock_wrlock_full): Likewise.
* nptl/pthread_rwlock_rdlock.c: (__pthread_rwlock_rdlock): Pass
CLOCK_REALTIME to __pthread_rwlock_rdlock_full even though it won't
be used because there's no timeout.
* nptl/pthread_rwlock_wrlock.c (__pthread_rwlock_wrlock): Pass
CLOCK_REALTIME to __pthread_rwlock_wrlock_full even though it won't
be used because there is no timeout.
* nptl/pthread_rwlock_timedrdlock.c (pthread_rwlock_timedrdlock):
Pass CLOCK_REALTIME to __pthread_rwlock_rdlock_full since abstime
uses that clock.
* nptl/pthread_rwlock_timedwrlock.c (pthread_rwlock_timedwrlock):
Pass CLOCK_REALTIME to __pthread_rwlock_wrlock_full since abstime
uses that clock.
* sysdeps/unix/sysv/linux/aarch64/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/alpha/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/arm/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/csky/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/hppa/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/i386/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/ia64/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/microblaze/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/nios2/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sh/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist
(GLIBC_2.30): Likewise.
* nptl/tst-abstime.c (th): Add pthread_rwlock_clockrdlock and
pthread_rwlock_clockwrlock timeout tests to match the existing
pthread_rwlock_timedrdloock and pthread_rwlock_timedwrlock tests.
* nptl/tst-rwlock14.c (do_test): Likewise.
* nptl/tst-rwlock6.c Invent verbose_printf macro, and use for
ancillary output throughout. (tf): Accept thread_args structure so
that rwlock, a clockid and function name can be passed to the
thread. (do_test_clock): Rename from do_test. Accept clockid
parameter to specify test clock. Use the magic clockid value of
CLOCK_USE_TIMEDLOCK to indicate that pthread_rwlock_timedrdlock and
pthread_rwlock_timedwrlock should be tested, otherwise pass the
specified clockid to pthread_rwlock_clockrdlock and
pthread_rwlock_clockwrlock. Use xpthread_create and xpthread_join.
(do_test): Call do_test_clock to test each clockid in turn.
* nptl/tst-rwlock7.c: Likewise.
* nptl/tst-rwlock9.c (writer_thread, reader_thread): Accept
thread_args structure so that the (now int) thread number, the
clockid and the function name can be passed to the thread.
(do_test_clock): Renamed from do_test. Pass the necessary
thread_args when creating the reader and writer threads. Use
xpthread_create and xpthread_join.
(do_test): Call do_test_clock to test each clockid in turn.
* manual/threads.texi: Add documentation for
pthread_rwlock_clockrdlock and pthread_rwlock_clockwrclock.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Add:
int pthread_cond_clockwait (pthread_cond_t *cond,
pthread_mutex_t *mutex,
clockid_t clockid,
const struct timespec *abstime)
which behaves just like pthread_cond_timedwait except it always measures
abstime against the supplied clockid. Currently supports CLOCK_REALTIME
and
CLOCK_MONOTONIC and returns EINVAL if any other clock is specified.
Includes feedback from many others. This function was originally
proposed[1] as pthread_cond_timedwaitonclock_np, but The Austin Group
preferred the new name.
* nptl/Makefile: Add tst-cond26 and tst-cond27
* nptl/Versions (GLIBC_2.30): Add pthread_cond_clockwait
* sysdeps/nptl/pthread.h: Likewise
* nptl/forward.c: Add __pthread_cond_clockwait
* nptl/forward.c: Likewise
* nptl/pthreadP.h: Likewise
* sysdeps/nptl/pthread-functions.h: Likewise
* nptl/pthread_cond_wait.c (__pthread_cond_wait_common): Add
clockid parameter and comment describing why we don't need to
check
its value. Use that value when calling
futex_abstimed_wait_cancelable rather than reading the clock
from
the flags. (__pthread_cond_wait): Pass unused clockid parameter.
(__pthread_cond_timedwait): Read clock from flags and pass it to
__pthread_cond_wait_common. (__pthread_cond_clockwait): Add new
function with weak alias from pthread_cond_clockwait.
* sysdeps/mach/hurd/i386/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/aarch64/libpthread.abilist
* (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/alpha/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/arm/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/csky/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/hppa/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/i386/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/ia64/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/microblaze/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/nios2/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sh/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist
(GLIBC_2.30): Likewise.
* nptl/tst-cond11.c (run_test): Support testing
pthread_cond_clockwait too by using a special magic
CLOCK_USE_ATTR_CLOCK value to determine whether to call
pthread_cond_timedwait or pthread_cond_clockwait. (do_test):
Pass
CLOCK_USE_ATTR_CLOCK for existing tests, and add new tests using
all combinations of CLOCK_MONOTONIC and CLOCK_REALTIME.
* ntpl/tst-cond26.c: New test for passing unsupported and
* invalid
clocks to pthread_cond_clockwait.
* nptl/tst-cond27.c: Add test similar to tst-cond5.c, but using
struct timespec and pthread_cond_clockwait.
* manual/threads.texi: Document pthread_cond_clockwait. The
* comment
was provided by Carlos O'Donell.
[1] https://sourceware.org/ml/libc-alpha/2015-07/msg00193.html
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
In preparation for adding POSIX clockwait variants of timedwait functions,
add a clockid_t parameter to futex_abstimed_wait functions and pass
CLOCK_REALTIME from all callers for the time being.
Replace lll_futex_timed_wait_bitset with lll_futex_clock_wait_bitset
which takes a clockid_t parameter rather than the magic clockbit.
* sysdeps/nptl/lowlevellock-futex.h,
sysdeps/unix/sysv/linux/lowlevellock-futex.h: Replace
lll_futex_timed_wait_bitset with lll_futex_clock_wait_bitset that
takes a clockid rather than a special clockbit.
* sysdeps/nptl/lowlevellock-futex.h: Add
lll_futex_supported_clockid so that client functions can check
whether their clockid parameter is valid even if they don't
ultimately end up calling lll_futex_clock_wait_bitset.
* sysdeps/nptl/futex-internal.h,
sysdeps/unix/sysv/linux/futex-internal.h
(futex_abstimed_wait, futex_abstimed_wait_cancelable): Add
clockid_t parameter to indicate which clock the absolute time
passed should be measured against. Pass that clockid onto
lll_futex_clock_wait_bitset. Add invalid clock as reason for
returning -EINVAL.
* sysdeps/nptl/futex-internal.h,
sysdeps/unix/sysv/linux/futex-internal.h: Introduce
futex_abstimed_supported_clockid so that client functions can check
whether their clockid parameter is valid even if they don't
ultimately end up calling futex_abstimed_wait.
* nptl/pthread_cond_wait.c (__pthread_cond_wait_common): Remove
code to calculate relative timeout for
__PTHREAD_COND_CLOCK_MONOTONIC_MASK and just pass CLOCK_MONOTONIC
or CLOCK_REALTIME as required to futex_abstimed_wait_cancelable.
* nptl/pthread_rwlock_common (__pthread_rwlock_rdlock_full)
(__pthread_wrlock_full), nptl/sem_waitcommon (do_futex_wait): Pass
additional CLOCK_REALTIME to futex_abstimed_wait_cancelable.
* nptl/pthread_mutex_timedlock.c (__pthread_mutex_timedlock):
Switch to lll_futex_clock_wait_bitset and pass CLOCK_REALTIME
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The fix for BZ#21270 (commit 158d5fa0e1) added a mask to avoid offset larger
than 1^44 to be used along __NR_mmap2. However mips64n32 users __NR_mmap,
as mips64n64, but still defines off_t as old non-LFS type (other ILP32, such
x32, defines off_t being equal to off64_t). This leads to use the same
mask meant only for __NR_mmap2 call for __NR_mmap, thus limiting the maximum
offset it can use with mmap64.
This patch fixes by setting the high mask only for __NR_mmap2 usage. The
posix/tst-mmap-offset.c already tests it and also fails for mips64n32. The
patch also change the test to check for an arch-specific header that defines
the maximum supported offset.
Checked on x86_64-linux-gnu, i686-linux-gnu, and I also tests tst-mmap-offset
on qemu simulated mips64 with kernel 3.2.0 kernel for both mips-linux-gnu and
mips64-n32-linux-gnu.
[BZ #24699]
* posix/tst-mmap-offset.c: Mention BZ #24699.
(do_test_bz21270): Rename to do_test_large_offset and use
mmap64_maximum_offset to check for maximum expected offset value.
* sysdeps/generic/mmap_info.h: New file.
* sysdeps/unix/sysv/linux/mips/mmap_info.h: Likewise.
* sysdeps/unix/sysv/linux/mmap64.c (MMAP_OFF_HIGH_MASK): Define iff
__NR_mmap2 is used.
Remove unnecessary variant_pcs field: the dynamic tag can be checked
directly.
* sysdeps/aarch64/dl-machine.h (elf_machine_runtime_setup): Remove the
DT_AARCH64_VARIANT_PCS check.
(elf_machine_lazy_rel): Use l_info[DT_AARCH64 (VARIANT_PCS)].
* sysdeps/aarch64/linkmap.h (struct link_map_machine): Remove
variant_pcs.
Using __builtin_cpu_supports() requires support in GCC and Glibc.
My recent patch to fenv_libc.h added an unprotected use of
__builtin_cpu_supports(). Compilation of Glibc itself will fail
with a sufficiently new GCC and sufficiently old Glibc:
../sysdeps/powerpc/fpu/fegetexcept.c: In function ‘__fegetexcept’:
../sysdeps/powerpc/fpu/fenv_libc.h:52:20: error: builtin ‘__builtin_cpu_supports’ needs GLIBC (2.23 and newer) that exports hardware capability bits [-Werror]
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Fixes 3db85a9814.
The power7 logb implementation does not show a performance gain on
ISA 2.07+ chips with faster floating-point to GRP instructions
(currently POWER8 and POWER9).
This patch moves the POWER7 implementation to generic one and enables
it for POWER7. It also add some cleanup to use inline floating-point
number instead of define them using static const.
The performance difference is for POWER9:
- Without patch:
"logb": {
"subnormal": {
"duration": 4.99202e+09,
"iterations": 8.83662e+08,
"max": 75.194,
"min": 5.501,
"mean": 5.64925
},
"normal": {
"duration": 4.97063e+09,
"iterations": 9.97094e+08,
"max": 46.489,
"min": 4.956,
"mean": 4.98512
}
}
- With patch:
"logb": {
"subnormal": {
"duration": 4.97226e+09,
"iterations": 9.92036e+08,
"max": 77.209,
"min": 4.892,
"mean": 5.01218
},
"normal": {
"duration": 4.96192e+09,
"iterations": 1.07545e+09,
"max": 12.361,
"min": 4.593,
"mean": 4.61382
}
}
The ifunc implementation is also enabled only for powerpc64.
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/power7/fpu/s_logb.c: Move to ...
* sysdeps/powerpc/fpu/s_logb.c: ... here. Use inline FP constants.
* sysdeps/powerpc/power7/fpu/s_logbf.c: Move to ...
* sysdeps/powerpc/fpu/s_logbf.c: ... here. Use inline FP constants.
* sysdeps/powerpc/power7/fpu/s_logbl.c: Move to ...
* sysdeps/powerpc/fpu/s_logbl.c: ... here. Use inline FP constants.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logb-power7.c:
Adjust implementation path.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logbf-power7.c:
Adjust implementation path.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logbl-power7.c:
Adjust implementation path.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_log* objects.
(CFLAGS-s_logbf-power7.c, CFLAGS-s_logbl-power7.c,
CFLAGS-s_logb-power7.c): New fule.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logb-power7.c: Move
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logb-power7.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logb-ppc64.c: Move
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logb-ppc64.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logb.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logb.c: ... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbf-power7.c: Move
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbf-power7.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbf-ppc64.c: Move
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbf-ppc64.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbf.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbf.c: ... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbl-power7.c: Move
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbl-power7.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbl-ppc64.c: Move
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbl-ppc64.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbl.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbl.c: ... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile: Remove file.
* sysdeps/powerpc/powerpc64/power7/fpu/s_logb.c: Remove file.
* sysdeps/powerpc/powerpc64/power7/fpu/s_logbf.c: Likewise.
* sysdeps/powerpc/powerpc64/power7/fpu/s_logbl.c: Likewise.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
- The resulting binary difference on 32 bits architecture is
minimum. On i686-linux-gnu (with architecture optimization
routine removed) there is no different using logb benchtests
- It helps wordsize-64 architectures that use ldbl-opt.
- It add some code simplification with reduction of duplicated
implementations.
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/ieee754/dbl-64/wordsize-64/s_logb.c: Move to ...
* sysdeps/ieee754/dbl-64/s_logb.c: ... here. Add work around for
powerpc32 integer 0 converting to -0.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
Passing a second argument to the ifunc resolver allows accessing
AT_HWCAP2 values from the resolver. AArch64 will start using AT_HWCAP2
on linux because for ilp32 to remain compatible with lp64 ABI no more
than 32bit hwcap flags can be in AT_HWCAP which is already used up.
Currently the relocation ordering logic does not guarantee that ifunc
resolvers can call libc apis or access libc objects, so only the
resolver arguments and runtime environment dependent instructions can
be used to do the dispatch (this affects ifunc resolvers outside of
the libc).
Since ifunc resolver is target specific and only supposed to be
called by the dynamic linker, the call ABI can be changed in a
backward compatible way:
Old call ABI passed hwcap as uint64_t, new abi sets the
_IFUNC_ARG_HWCAP flag in the hwcap and passes a second argument
that's a pointer to an extendible struct. A resolver has to check
the _IFUNC_ARG_HWCAP flag before accessing the second argument.
The new sys/ifunc.h installed header has the definitions for the
new ABI, everything is in the implementation reserved namespace.
An alternative approach is to try to support extern calls from ifunc
resolvers such as getauxval, but that seems non-trivial
https://sourceware.org/ml/libc-alpha/2017-01/msg00468.html
* sysdeps/aarch64/Makefile: Install sys/ifunc.h and add tests.
* sysdeps/aarch64/dl-irel.h (elf_ifunc_invoke): Update to new ABI.
* sysdeps/aarch64/sys/ifunc.h: New file.
* sysdeps/aarch64/tst-ifunc-arg-1.c: New file.
* sysdeps/aarch64/tst-ifunc-arg-2.c: New file.
With commit f0b2132b35 ("ld.so:
Support moving versioned symbols between sonames [BZ #24741]"), the
dynamic linker will find the definition of vfork in libc and binds
a vfork reference to that symbol, even if the soname in the version
reference says that the symbol should be located in libpthread.
As a result, the forwarder (whether it's IFUNC-based or a duplicate
of the libc implementation) is no longer necessary.
On older architectures, a placeholder symbol is required, to make sure
that the GLIBC_2.1.2 symbol version does not go away, or is turned in
to a weak symbol definition by the link editor. (The symbol version
needs to preserved so that the symbol coverage check in
elf/dl-version.c does not fail for old binaries.)
mips32 is an outlier: It defined __vfork@@GLIBC_2.2, but the
baseline is GLIBC_2.0. Since there are other @@GLIBC_2.2 symbols,
the placeholder symbol is not needed there.
Using 'mffs' instruction to read the Floating Point Status Control Register
(FPSCR) can force a processor flush in some cases, with undesirable
performance impact. If the values of the bits in the FPSCR which force the
flush are not needed, an instruction that is new to POWER9 (ISA version 3.0),
'mffsl' can be used instead.
Cases included: get_rounding_mode, fegetround, fegetmode, fegetexcept.
* sysdeps/powerpc/bits/fenvinline.h (__fegetround): Use
__fegetround_ISA300() or __fegetround_ISA2() as appropriate.
(__fegetround_ISA300) New.
(__fegetround_ISA2) New.
* sysdeps/powerpc/fpu_control.h (IS_ISA300): New.
(_FPU_MFFS): Move implementation...
(_FPU_GETCW): Here.
(_FPU_MFFSL): Move implementation....
(_FPU_GET_RC_ISA300): Here. New.
(_FPU_GET_RC): Use _FPU_GET_RC_ISA300() or _FPU_GETCW() as appropriate.
* sysdeps/powerpc/fpu/fenv_libc.h (fegetenv_status_ISA300): New.
(fegetenv_status): New.
* sysdeps/powerpc/fpu/fegetmode.c (fegetmode): Use fegetenv_status()
instead of fegetenv_register().
* sysdeps/powerpc/fpu/fegetexcept.c (__fegetexcept): Likewise.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
The kernel is evolving this interface (e.g., removal of the
restriction on cross-device copies), and keeping up with that
is difficult. Applications which need the function should
run kernels which support the system call instead of relying on
the imperfect glibc emulation.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The kernel interface uses type unsigned int, but there is an
internal conversion to int, so INT_MAX is the correct limit.
Part of the buffer will always be unused, but this is not a
problem. Such huge buffers do not occur in practice anyway.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Since sysdeps/i386/dl-lookupcfg.h and sysdeps/x86_64/dl-lookupcfg.h are
identical, we can replace them with sysdeps/x86/dl-lookupcfg.h.
* sysdeps/i386/dl-lookupcfg.h: Moved to ...
* sysdeps/x86/dl-lookupcfg.h: Here.
* sysdeps/x86_64/dl-lookupcfg.h: Removed.
The nds32 creates two specific syscalls, udftrap and fp_udfiex_crtl, in
kernel v5.0 and v5.2, respectively. Add these two syscalls to
syscall-names.list.
Define all currently used Linux versions used for
PREPARE_VERSION{,_KNOWN} in sysdeps/unix/sysv/linux/dl-vdso.h and use
them instead of duplicating the versions and precomputed hashes across
architecture specific files.
* sysdeps/unix/sysv/linux/aarch64/gettimeofday.c (INIT_ARCH): Use
PREPARE_VERSION_KNOWN.
* sysdeps/unix/sysv/linux/aarch64/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/dl-vdso.h (VDSO_NAME_LINUX_2_6_39): New
define.
(VDSO_HASH_LINUX_2_6_39): Likewise.
(VDSO_NAME_LINUX_4_9): Likewise.
(VDSO_HASH_LINUX_4_9): Likewise.
* sysdeps/unix/sysv/linux/powerpc/gettimeofday.c (INIT_ARCH): Likewise.
* sysdeps/unix/sysv/linux/powerpc/init-first.c
(_libc_vdso_platform_setup): Likewise.
* sysdeps/unix/sysv/linux/powerpc/time.c (INIT_ARCH): Likewise.
* sysdeps/unix/sysv/linux/s390/init-first.c (_libc_vdso_platform_setup):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/init-first.c (__vdso_platform_setup):
Likewise.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Add 'volatile' keyword to a few asm statements, to force the compiler
to generate the instructions therein.
Some instances were implicitly volatile, but adding keyword for consistency.
2019-06-19 Paul A. Clarke <pc@us.ibm.com>
* sysdeps/powerpc/fpu/fenv_libc.h (relax_fenv_state): Add 'volatile'.
* sysdeps/powerpc/fpu/fpu_control.h (__FPU_MFFS): Likewise.
(__FPU_MFFSL): Likewise.
(_FPU_SETCW): Likewise.
__ppc_get_timebase_freq() always return 0 when using static linked
glibc.
This is a minimal example.c to reproduce:
/******************************/
#include <inttypes.h>
#include <stdint.h>
#include <stdio.h>
#include <sys/platform/ppc.h>
int main() {
uint64_t freq = __ppc_get_timebase_freq();
printf("Time Base frequency = %"PRIu64" Hz\n", freq);
if (freq == 0)
return -1;
return 0;
}
/******************************/
Compile command: gcc -static example.c
This bug has been reproduced, fixed and tested on all powerpc platforms
(ppc32, ppc64 and ppc64le).
The underlying code of __ppc_get_timebase_freq uses __get_timebase_freq
that has a different implementation for shared and static version of
glibc. In the static version, there is an incorrect sense in the if
check for the fd returned when opening /proc/cpuinfo.
This solution is mostly a cherry-pick from:
commit 4791e4f773d060c1a37b27aac5b03cdfa9327afc
Author: Stan Shebs <stanshebs@google.com>
Date: Fri May 17 12:25:19 2019 -0700
Subject: Fix sense of a test in the static-linking version of ppc get_clockfreq
That is in branch glibc/google/grte/v5-2.27/master and was mentioned for
inclusion on master here:
https://www.sourceware.org/ml/libc-alpha/2019-05/msg00409.html
Adapted from original fix for get_clockfreq. That code was moved to
get_timebase_freq.
Also added a static-build testcase for __ppc_get_timebase_freq since the
underlying function has different implementations for shared and static
build.
[BZ #24640]
* sysdeps/unix/sysv/linux/powerpc/get_timebase_freq.c
[!SHARED] (__get_timebase_freq): Fix sense of a test in the
static-linking version.
* sysdeps/unix/sysv/linux/powerpc/Makefile
(tests-static): Add test-gettimebasefreq-static.
(tests): Likewise.
* sysdeps/unix/sysv/linux/powerpc/test-gettimebasefreq-static.c:
New file.
Although defined in initial TLS/NPTL ABI for m68k and ColdFire [1], kernel
support was never pushed upstream. This patch removes the unused m68k
vDSO support.
Checked with a build against m68k and m68k-coldfire and some basic
tests on ARAnyM.
* sysdeps/unix/sysv/linux/m68k/Makefile (sysdep_routines,
sysdep-rtld-routines): Remove rules.
* sysdeps/unix/sysv/linux/m68k/Versions (libc) [GLIBC_PRIVATE]:
Remove __vdso_atomic_cmpxchg_32 and __vdso_atomic_barrier.
(ld) [GLIBC_PRIVATE]: __rtld___vdso_read_tp,
__rtld___vdso_atomic_cmpxchg_32, and __rtld___vdso_atomic_barrier.
* sysdeps/unix/sysv/linux/m68k/coldfire/atomic-machine.h
(atomic_compare_and_exchange_val_acq, atomic_full_barrier): Remove
vDSO path for SHARED.
* sysdeps/unix/sysv/linux/m68k/init-first.c: Remove file.
* sysdeps/unix/sysv/linux/m68k/libc-m68k-vdso.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/m68k-helpers.S: Likewise.
* sysdeps/unix/sysv/linux/m68k/m68k-vdso.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/m68k-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/m68k/m68k-helpers.c: New file.
[1] https://lists.debian.org/debian-68k/2007/11/msg00071.html
This patches consolidates all the powerpc llrint{f} implementations on
the generic sysdeps/powerpc/fpu/s_llrint{f}.
The IFUNC support is also moved only to powerpc64 only, since for
powerpc64le generic implementation resulting in optimized code.
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_llrint-power8, s_llrint-power6x, and
s_llrint-ppc64.
(CFLAGS-s_llrint-power8.c, CFLAGS-s_llrint-power6x.c): New rule.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_llrint-power6x.c: New
file.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_llrint-power8.c:
Likewise.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_llrint-ppc64.c:
Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_lrint.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_lrint.c: ... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llrint.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_llrint.c: ... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llrintf.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_llrintf.c: ... here.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_lrint.c: New file.
* sysdeps/powerpc/powerpc64/fpu/Makefile: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile
(libm-sysdep_routines): Remove s_llrint-* objects.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llrint-power6x.S: Remove
file.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llrint-power8.S:
Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llrint-ppc64.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_llrint.c: New file.
* sysdeps/powerpc/powerpc64/fpu/s_llrintf.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_lrint.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_lrintf.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_llrint.S: Remove file.
* sysdeps/powerpc/powerpc64/fpu/s_llrintf.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_lrint.S: Likewise.
* sysdeps/powerpc/powerpc64/power6x/fpu/s_llrint.S: Likewise.
* sysdeps/powerpc/powerpc64/power8/fpu/s_llrint.S: Likewise.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
The identifier linux is used as a predefined macro, so the actually
used path is 1/stat.h or 1/stat64.h. Using the quote-based version
triggers a file lookup for /usr/include/bits/linux/stat.h (or whatever
directory is used to store bits/statx.h), but since bits/ is pretty
much reserved by glibc, this appears to be acceptable.
This is related to GCC PR 80005: incorrect macro expansion of the
argument of __has_include.
Suggested by Zack Weinberg.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This patch adds the new constant IPV6_ROUTER_ALERT_ISOLATE from Linux
5.1 to sysdeps/unix/sysv/linux/bits/in.h.
Tested for x86_64.
* sysdeps/unix/sysv/linux/bits/in.h (IPV6_ROUTER_ALERT_ISOLATE):
New macro.
Some recent change on GCC mainline resulted in the localplt test
failing for powerpc soft-float (not sure exactly when, as the failure
appeared when there were other build test failures as well;
<https://sourceware.org/ml/libc-testresults/2019-q2/msg00261.html>
shows it remaining when other failures went away). The problem is a
call to memset that GCC now generates in the libgcc long double code.
Since memset is documented as a function GCC may always implicitly
generate calls to, it seems reasonable to allow that local PLT
reference (just like those for libgcc functions that GCC implicitly
generates calls to and that are also exported from libc.so), which
this patch does.
Tested for powerpc soft-float with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/localplt.data:
Allow memset in libc.so.
Avoid lazy binding of symbols that may follow a variant PCS with different
register usage convention from the base PCS.
Currently the lazy binding entry code does not preserve all the registers
required for AdvSIMD and SVE vector calls. Saving and restoring all
registers unconditionally may break existing binaries, even if they never
use vector calls, because of the larger stack requirement for lazy
resolution, which can be significant on an SVE system.
The solution is to mark all symbols in the symbol table that may follow
a variant PCS so the dynamic linker can handle them specially. In this
patch such symbols are always resolved at load time, not lazily.
So currently LD_AUDIT for variant PCS symbols are not supported, for that
the _dl_runtime_profile entry needs to be changed e.g. to unconditionally
save/restore all registers (but pass down arg and retval registers to
pltentry/exit callbacks according to the base PCS).
This patch also removes a __builtin_expect from the modified code because
the branch prediction hint did not seem useful.
* sysdeps/aarch64/dl-dtprocnum.h: New file.
* sysdeps/aarch64/dl-machine.h (DT_AARCH64): Define.
(elf_machine_runtime_setup): Handle DT_AARCH64_VARIANT_PCS.
(elf_machine_lazy_rel): Check STO_AARCH64_VARIANT_PCS and bind such
symbols at load time.
* sysdeps/aarch64/linkmap.h (struct link_map_machine): Add variant_pcs.
The powerpc finite optimization do not show much gain:
- GCC will call libm iff -fsignaling-nans is used. This usage pattern
is usually not performance oriented and for such calls PLT overhead
should dominate execution time.
- The power7 uses ftdiv to optimize for some input patterns, but at
cost of others. Comparing against generic C implementation built
for powerpc64-linux-gnu-power7 (--with-cpu=power7):
- Generic sysdeps/ieee754 implementation:
"isfinite": {
"": {
"duration": 5.0082e+09,
"iterations": 2.45299e+09,
"max": 43.824,
"min": 2.008,
"mean": 2.04167
},
"INF": {
"duration": 4.66554e+09,
"iterations": 2.28288e+09,
"max": 35.73,
"min": 2.008,
"mean": 2.04371
},
"NAN": {
"duration": 4.66274e+09,
"iterations": 2.28716e+09,
"max": 34.161,
"min": 2.009,
"mean": 2.03866
}
}
- power7 optimized one:
"isfinite": {
"": {
"duration": 4.99111e+09,
"iterations": 2.65566e+09,
"max": 25.015,
"min": 1.716,
"mean": 1.87942
},
"INF": {
"duration": 4.6783e+09,
"iterations": 2.0999e+09,
"max": 35.264,
"min": 1.868,
"mean": 2.22787
},
"NAN": {
"duration": 4.67915e+09,
"iterations": 2.08678e+09,
"max": 38.099,
"min": 1.869,
"mean": 2.24228
}
}
So it basically optimizes marginally for normal numbers while
increasing the latency for other kind of FP.
- The power8 implementation is just the generic implementation using
ISA 2.07 mfvsrd instruction (which GCC uses for generic implementation).
So generic implementation is the best option for powerpc64le.
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/Makefile
(sysdeps_routines, libm-sysdep_routines): Remove s_finite*
objects.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_finite-power7.S:
Remove file.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_finite-ppc32.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_finite.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_finitef-ppc32.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_finitef.c: Likewise.
* sysdeps/powerpc/powerpc32/power7/fpu/s_finite.S: Likewise.
* sysdeps/powerpc/powerpc32/power7/fpu/s_finitef.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile (sysdep_call):
Remove s_finite* objects.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_finite-power7.S: Remove file.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_finite-power8.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_finite-ppc64.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_finite.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_finitef-ppc64.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_finitef.c: Likewise.
* sysdeps/powerpc/powerpc64/power7/fpu/s_finite.S: Likewise.
* sysdeps/powerpc/powerpc64/power7/fpu/s_finitef.S: Likewise.
* sysdeps/powerpc/powerpc64/power8/fpu/s_finite.S: Likewise.
* sysdeps/powerpc/powerpc64/power8/fpu/s_finitef.S: Likewise.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
- math.h will use compiler builtin for gcc 4.4 when built without
-fsignaling-nans and the builtin is expanded inline for all
support architectures. As an example, there is no intra finite
call on libm for the architecture I checked, x86, arm, aarch64,
and powerpc.
- The resulting binary difference on 32 bits architecture is minimum
for the non hotspot symbol.
- It helps wordsize-64 architectures that use ldbl-opt.
- It add some code simplification with reduction of duplicated
implementations.
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/ieee754/dbl-64/wordsize-64/s_finite.c: Move to ...
* sysdeps/ieee754/dbl-64/s_finite.c: ... here and format code.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
