With tilepro support removal we can now simplify internal tile support by
moving the directory structure to avoid the unnecessary directory levels
in tile/tilegx both on generic and linux folders.
Checked with a build for tilegx-linux-gnu and tilegx-linux-gnu-32 with
and without the patch, there is no difference in generated binary with
a dissassemble.
* stdlib/bug-getcontext.c (do_test): Remove tilepro mention in
comment.
* sysdeps/tile/preconfigure: Remove tilegx folder.
* sysdeps/tile/tilegx/Implies: Move definitions to ...
* sysdeps/tile/Implies: ... here.
* sysdeps/tile/tilegx/Makefile: Move rules to ...
* sysdeps/tile/Makefile: ... here.
* sysdeps/tile/tilegx/atomic-machine.h: Move definitions to ...
* sysdeps/tile/atomic-machine.h: ... here. Add include guards.
* sysdeps/tile/tilegx/bits/wordsize.h: Move to ...
* sysdeps/tile/bits/wordsize.h: ... here.
* sysdeps/tile/tilegx/*: Move to ...
* sysdeps/tile/*: ... here.
* sysdeps/tile/tilegx/tilegx32/Implies: Move to ...
* sysdeps/tile/tilegx32/Implies: ... here.
* sysdeps/tile/tilegx/tilegx64/Implies: Move to ...
* sysdeps/tile/tilegx64/Implies: ... here.
* sysdeps/unix/sysv/linux/tile/tilegx/Makefile: Move definitions
to ...
* sysdeps/unix/sysv/linux/tile/Makefile: ... here.
* sysdeps/unix/sysv/linux/tile/tilegx/*: Move to ...
* sysdeps/unix/sysv/linux/tile/*: ... here.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/*: Move to ...
* sysdeps/unix/sysv/linux/tile/tilegx32/*: ... here.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/*: Move to ...
* sysdeps/unix/sysv/linux/tile/tilegx64/*: ... here.
Three tests fail with a read-only source directory because they try to
write into the source directory. None of these write into it in a way
that should actually be problematic for concurrent builds sharing the
same writable source directory, but avoiding any writing into the
source directory (from testing, or from building glibc if the source
timestamps are properly ordered) is still a good idea, as being able
to build with read-only sources helps make sure there isn't anything
that could cause problems for concurrent builds.
This patch changes the tests in question to use either /tmp or the
build directory to write their temporary files (or to test O_TMPFILE,
as applicable).
Tested for x86_64.
* io/Makefile (tst-open-tmpfile-ARGS): New variable.
* posix/tst-mmap-offset.c (fname): Use /tmp.
* stdlib/tst-setcontext3.sh (tempfile): Use ${objpfx}.
This patch adds support for defining strtof32, wcstof32, strtof32_l
and wcstof32_l functions as aliases of the corresponding float
functions when _Float32 support is enabled.
Tested for x86_64; also tested with build-many-glibcs.py in
conjunction with other _Float32 changes.
* stdlib/strtof.c: Include <bits/floatn.h>
[__HAVE_FLOAT32 && !__HAVE_DISTINCT_FLOAT32] (strtof32): Define
and later undefine as macro. Define as weak alias if
[!USE_WIDE_CHAR].
[__HAVE_FLOAT32 && !__HAVE_DISTINCT_FLOAT32] (wcstof32): Define
and later undefine as macro. Define as weak alias if
[USE_WIDE_CHAR].
* stdlib/strtof_l.c: Include <bits/floatn.h>
[__HAVE_FLOAT32 && !__HAVE_DISTINCT_FLOAT32] (strtof32_l): Define
and later undefine as macro. Define as weak alias if
[!USE_WIDE_CHAR].
[__HAVE_FLOAT32 && !__HAVE_DISTINCT_FLOAT32] (wcstof32_l): Define
and later undefine as macro. Define as weak alias if
[USE_WIDE_CHAR].
This patch adds support for defining strfromf32 as an alias of
strfromf when _Float32 support is enabled.
Tested for x86_64; also tested with build-many-glibcs.py in
conjunction with other _Float32 changes.
* stdlib/strfromf.c: Include <bits/floatn.h>.
[__HAVE_FLOAT32 && !__HAVE_DISTINCT_FLOAT32] (strfromf32): Define
and later undefine as macro and define as weak alias.
This patch continues filling out TS 18661-3 support by adding *f64 and
*f32x function aliases, supporting _Float64 and _Float32x, as aliases
for double functions. These types are supported for all glibc
configurations. The API corresponds exactly to that for _Float128 and
_Float64x. _Float32 aliases to float functions remain to be added in
subsequent patches to complete this process (then there are a few
miscellaneous functions in TS 18661-3 to implement that aren't simply
versions of existing functions for new types).
The patch enables the feature in bits/floatn-common.h, adds symbol
versions and documentation with updates to ABI baselines, and arranges
for the libm functions for the new types to be tested. As with the
_Float64x changes there are some x86 ulps updates because of header
inlines not used for the new types (and one other change to the
non-multiarch libm-test-ulps, which I suppose comes from using a
different compiler version / configuration from when it was last
regenerated).
Tested for x86_64 and x86, and with build-many-glibcs.py, with both
GCC 6 and GCC 7.
* bits/floatn-common.h (__HAVE_FLOAT64): Define to 1.
(__HAVE_FLOAT32X): Likewise.
* manual/math.texi (Mathematics): Document support for _Float64
and _Float32x.
* math/Makefile (test-types): Add float64 and float32x.
* math/Versions (GLIBC_2.27): Add _Float64 and _Float32x
functions.
* stdlib/Versions (GLIBC_2.27): Likewise.
* wcsmbs/Versions (GLIBC_2.27): Likewise.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
This patch adds support for defining strtof64, strtof32x, wcstof64,
wcstof32x and the corresponding _l functions as aliases of the
corresponding double functions when _Float64 and _Float32x support is
enabled.
Tested for x86_64; also tested with build-many-glibcs.py in
conjunction with other _Float64 / _Float32x changes.
* stdlib/strtod.c: Include <bits/floatn.h>.
(BUILD_DOUBLE): New macro.
[BUILD_DOUBLE && __HAVE_FLOAT64 && !__HAVE_DISTINCT_FLOAT64]
(strtof64): Define and later undefine as macro. Define as weak
alias if [!USE_WIDE_CHAR].
[BUILD_DOUBLE && __HAVE_FLOAT64 && !__HAVE_DISTINCT_FLOAT64]
(wcstof64): Define and later undefine as macro. Define as weak
alias if [USE_WIDE_CHAR].
[BUILD_DOUBLE && __HAVE_FLOAT32X && !__HAVE_DISTINCT_FLOAT32X]
(strtof32x): Define and later undefine as macro. Define as weak
alias if [!USE_WIDE_CHAR].
[BUILD_DOUBLE && __HAVE_FLOAT32X && !__HAVE_DISTINCT_FLOAT32X]
(wcstof32x): Define and later undefine as macro. Define as weak
alias if [USE_WIDE_CHAR].
* stdlib/strtod_l.c: Include <bits/floatn.h>.
(BUILD_DOUBLE): New macro.
[BUILD_DOUBLE && __HAVE_FLOAT64 && !__HAVE_DISTINCT_FLOAT64]
(strtof64_l): Define and later undefine as macro. Define as weak
alias if [!USE_WIDE_CHAR].
[BUILD_DOUBLE && __HAVE_FLOAT64 && !__HAVE_DISTINCT_FLOAT64]
(wcstof64_l): Define and later undefine as macro. Define as weak
alias if [USE_WIDE_CHAR].
[BUILD_DOUBLE && __HAVE_FLOAT32X && !__HAVE_DISTINCT_FLOAT32X]
(strtof32x_l): Define and later undefine as macro. Define as weak
alias if [!USE_WIDE_CHAR].
[BUILD_DOUBLE && __HAVE_FLOAT32X && !__HAVE_DISTINCT_FLOAT32X]
(wcstof32x_l): Define and later undefine as macro. Define as weak
alias if [USE_WIDE_CHAR].
This patch adds support for defining strfromf64 and strfromf32x
aliases of strfromd when the corresponding types are enabled.
Tested for x86_64; also tested with build-many-glibcs.py in
conjunction with other _Float64 / _Float32x changes.
* stdlib/strfromd.c: Include <bits/floatn.h>.
[__HAVE_FLOAT64 && !__HAVE_DISTINCT_FLOAT64] (strfromf64): Define
and later undefine as macro and define as weak alias.
[__HAVE_FLOAT32X && !__HAVE_DISTINCT_FLOAT32X] (strfromf32x):
Likewise.
This patch continues filling out TS 18661-3 support by adding *f64x
function aliases on platforms with _Float64x support. (It so happens
the set of such platforms is exactly the same as the set of platforms
with _Float128 support, although on x86_64, x86 and ia32 the _Float64x
format is Intel extended rather than binary128.) The API provided
corresponds exactly to that provided for _Float128, mostly coming from
TS 18661-3. As these functions always alias those for another type
(long double, _Float128 or both), __* function names are not provided,
as in other cases of alias types.
Given the preparation done in previous patches, this one just enables
the feature via Makeconfig and bits/floatn.h, adds symbol versions,
and updates documentation and ABI baselines. The symbol versions are
present unconditionally as GLIBC_2.27 in the relevant Versions files,
as it's OK for those to specify versions for functions that may not be
present in some configurations; no additional complexity is needed
unless in future some configuration gains support for this type that
didn't have such support in 2.27. The Makeconfig additions for ia64
and x86 aren't strictly needed, as those configurations also get
float64x-alias-fcts definitions from
sysdeps/ieee754/float128/Makeconfig, but still seem appropriate given
that _Float64x is not _Float128 for those configurations.
A libm-test-ulps update for x86 is included. This is because
bits/mathinline.h does not have _Float64x support added and for two
functions the use of out-of-line functions results in increased ulps
(ifloat64x shares ulps with ildouble / ifloat128 as appropriate).
Given that we'd like generally to eliminate bits/mathinline.h
optimizations, preferring to have such optimizations in GCC instead,
it seems reasonable not to add such support there for new types. GCC
support for _FloatN / _FloatNx built-in functions is limited, but has
been improved in GCC 8, and at some point I hope the full set of libm
built-in functions in GCC, and other optimizations with
per-floating-type aspects, will be enabled for all _FloatN / _FloatNx
types.
Tested for x86_64 and x86, and with build-many-glibcs.py, with both
GCC 6 and GCC 7.
* sysdeps/ia64/Makeconfig (float64x-alias-fcts): New variable.
* sysdeps/ieee754/float128/Makeconfig (float64x-alias-fcts):
Likewise.
* sysdeps/ieee754/ldbl-128/Makeconfig (float64x-alias-fcts):
Likewise.
* sysdeps/x86/Makeconfig: New file.
* bits/floatn-common.h (__HAVE_FLOAT64X): Remove macro.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* bits/floatn.h (__HAVE_FLOAT64X): New macro.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/ia64/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/ieee754/ldbl-128/bits/floatn.h (__HAVE_FLOAT64X):
Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/mips/ieee754/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/powerpc/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/x86/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* manual/math.texi (Mathematics): Document support for _Float64x.
* math/Versions (GLIBC_2.27): Add _Float64x functions.
* stdlib/Versions (GLIBC_2.27): Likewise.
* wcsmbs/Versions (GLIBC_2.27): Likewise.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
This patch adds support for defining strfromf64x as a function alias
(of strfroml or strfromf128, as appropriate) when _Float64x is
supported.
Tested for x86_64, including in conjunction with _Float64x support
patches, and also tested build for other configurations (in
conjunction with _Float64x support patches) with build-many-glibcs.py
to cover the various different files needing updating to define these
aliases.
* stdlib/strfroml.c: Always include <stdlib.h>.
[__HAVE_FLOAT64X_LONG_DOUBLE] (strfromf64x): Define and later
undefine as macro and define as weak alias.
* sysdeps/ieee754/float128/strfromf128.c: Include <bits/floatn.h>.
[__HAVE_FLOAT64X && !__HAVE_FLOAT64X_LONG_DOUBLE]: Include
<stdlib.h>.
[__HAVE_FLOAT64X && !__HAVE_FLOAT64X_LONG_DOUBLE] (strfromf64x):
Define and later undefine as macro and define as weak alias.
This patch adds support for defining strtof64x, strtof64x_l, wcstof64
and wcstof64x_l function aliases when _Float64x is supported.
Tested for x86_64, including in conjunction with _Float64x support
patches, and also tested build for other configurations (in
conjunction with _Float64x support patches) with build-many-glibcs.py
to cover the various different files needing updating to define these
aliases.
* stdlib/strtold.c [__HAVE_FLOAT64X_LONG_DOUBLE] (strtof64x):
Define and later undefine as macro. Define as weak alias if
[!USE_WIDE_CHAR].
[__HAVE_FLOAT64X_LONG_DOUBLE] (wcstof64x): Define and later
undefine as macro. Define as weak alias if [USE_WIDE_CHAR].
* sysdeps/ieee754/float128/strtof128.c: Include <bits/floatn.h>.
[__HAVE_FLOAT64X && !__HAVE_FLOAT64X_LONG_DOUBLE] (strtof64x):
Define and later undefine as macro. Define as weak alias if
[!USE_WIDE_CHAR].
[__HAVE_FLOAT64X && !__HAVE_FLOAT64X_LONG_DOUBLE] (wcstof64x):
Define and later undefine as macro. Define as weak alias if
[USE_WIDE_CHAR].
* sysdeps/ieee754/float128/strtof128_l.c
[__HAVE_FLOAT64X && !__HAVE_FLOAT64X_LONG_DOUBLE] (strtof64x_l):
Define and later undefine as macro. Define as weak alias if
[!USE_WIDE_CHAR].
[__HAVE_FLOAT64X && !__HAVE_FLOAT64X_LONG_DOUBLE] (wcstof64x_l):
Define and later undefine as macro. Define as weak alias if
[USE_WIDE_CHAR].
* sysdeps/ieee754/ldbl-128/strtold_l.c
[__HAVE_FLOAT64X_LONG_DOUBLE] (strtof64x_l): Define and later
undefine as macro. Define as weak alias if [!USE_WIDE_CHAR].
[__HAVE_FLOAT64X_LONG_DOUBLE] (wcstof64x_l): Define and later
undefine as macro. Define as weak alias if [USE_WIDE_CHAR].
* sysdeps/ieee754/ldbl-64-128/strtold_l.c
[__HAVE_FLOAT64X_LONG_DOUBLE] (strtof64x_l): Define and later
undefine as macro. Define as weak alias if [!USE_WIDE_CHAR].
[__HAVE_FLOAT64X_LONG_DOUBLE] (wcstof64x_l): Define and later
undefine as macro. Define as weak alias if [USE_WIDE_CHAR].
* sysdeps/ieee754/ldbl-96/strtold_l.c
[__HAVE_FLOAT64X_LONG_DOUBLE] (strtof64x_l): Define and later
undefine as macro. Define as weak alias if [!USE_WIDE_CHAR].
[__HAVE_FLOAT64X_LONG_DOUBLE] (wcstof64x_l): Define and later
undefine as macro. Define as weak alias if [USE_WIDE_CHAR].
The tst-strtod-round-skeleton.c conditionals relating to handling of
_Float64x require associated <float.h> macros, which requires
__STDC_WANT_IEC_60559_TYPES_EXT__ to be defined before <float.h> is
included if _Float64x is supported. This patch adds the necessary
definition.
Tested for x86_64, including in conjunction with _Float64x support
patches.
* stdlib/tst-strtod-round-skeleton.c
(__STDC_WANT_IEC_60559_TYPES_EXT__): Define before including
headers.
This patch moves wcstof128 and wcstof128_l Versions file entries from
stdlib/Versions to wcsmbs/Versions, which is a more appropriate place
for them.
Tested for x86_64, and with build-many-glibcs.py that installed
stripped shared libraries are unchanged by the patch.
* stdlib/Versions (libc): Move entries for wcstof128 and
wcstof128_l to ....
* wcsmbs/Versions (libc): ... here.
Include <float128-abi.h>.
Continuing the preparation for additional _FloatN / _FloatNx type
support, this patch adds support to type-generic strtod tests.
GEN_STRTOD_TEST_FOREACH and STRTOD_TEST_FOREACH are made to handle the
full set of such types. tst-strtod-round-skeleton.c is updated for
those types it can handle without needing changes to the generator
(i.e. those types that have already-handled formats).
Tested for x86_64.
* stdlib/tst-strtod.h (F16): New macro.
(F32): Likewise.
(F64): Likewise.
(F32X): Likewise.
(F64X): Likewise.
(F128X): Likewise.
(IF_FLOAT16): Likewise.
(IF_FLOAT32): Likewise.
(IF_FLOAT64): Likewise.
(IF_FLOAT32X): Likewise.
(IF_FLOAT64X): Likewise.
(IF_FLOAT128X): Likewise.
(GEN_TEST_STRTOD_FOREACH): Conditionally call macros for _Float16,
_Float32, _Float64, _Float32x, _Float64x and _Float128x.
(STRTOD_TEST_FOREACH): Likewise.
* stdlib/tst-strtod-round-skeleton.c (CHOOSE_f32): New macro.
(CHOOSE_f64): Likewise.
(CHOOSE_f32x): Likewise.
(CHOOSE_f64x): Likewise.
CLDR uses this pattern as well.
[BZ #22019]
* localedata/locales/el_GR: Set n_cs_precedes to 0.
* localedata/locales/el_CY: copy "el_GR" because it is identical.
* stdlib/tst-strfmon_l.c: adapt test case.
With support for _Float128 functions on platforms where that type has
the same ABI as long double, as well as on platforms where it is
ABI-distinct, those functions will need to be exported from glibc's
shared libraries at appropriate symbol versions in each case.
This patch avoids duplication of lists of symbols to export by moving
the symbols other than __* to math/Versions and stdlib/Versions.
There, they are conditional on <float128-abi.h> defining
FLOAT128_VERSION and a default version of that header is added that
does not define that macro. Enabling the float128 function aliases
will then include adding a sysdeps/ieee754/ldbl-128/float128-abi.h
that defines FLOAT128_VERSION to GLIBC_2.27. Symbols __* remain in
sysdeps/ieee754/float128/Versions; those symbols should be present
only once per floating-point format, not once per type.
Note that if any platforms currently lacking support for a type with
binary128 format get glibc support for such a type in future (whether
only as _Float128, or also as a new long double format), and new libm
functions (present for all types) have been added by then, additional
macros will be needed to allow such functions to get a version of the
form "GLIBC_2.28 if the platform had _Float128 support by then, or the
later version at which that platform had _Float128 support added".
This is not however a preexisting condition, but would have applied
equally to the existing support for _Float128 as an ABI-distinct
type. New all-type libm functions should just be added to the
appropriate symbol version (currently GLIBC_2.27) for all types, with
such special-case handling for _Float128 versions (and _Float64x as
well in future) waiting until someone actually wants to add support
for _Float128 to an existing platform after a release in which that
platform and a post-2.26 libm function had support but that platform
lacked _Float128 support.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch. Also tested in conjunction
with the remaining changes to enable float128 aliases.
* sysdeps/generic/float128-abi.h: New file.
* sysdeps/ieee754/float128/Versions (FLOAT128_VERSION): Move
non-__prefixed symbols to ....
* math/Versions: ... here. Include <float128-abi.h>.
* stdlib/Versions ... and here. Include <float128-abi.h>
This patch adds support for building strtof128, wcstof128, strtof128_l
and wcstof128_l as aliases, in the case of __HAVE_FLOAT128 &&
!__HAVE_DISTINCT_FLOAT128.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch. Also tested together with
changes to enable float128 aliases.
* stdlib/strtold.c: Include <bits/floatn.h>
[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128] (strtof128): Define
and later undefine as macro. Define as weak alias if
[!USE_WIDE_CHAR].
[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128] (wcstof128): Define
and later undefine as macro. Define as weak alias if
[USE_WIDE_CHAR].
* sysdeps/ieee754/ldbl-128/strtold_l.c [__HAVE_FLOAT128 &&
!__HAVE_DISTINCT_FLOAT128] (strtof128_l): Define and later
undefine as macro. Define as weak alias if [!USE_WIDE_CHAR].
[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128] (wcstof128_l):
Define and later undefine as macro. Define as weak alias if
[USE_WIDE_CHAR].
* sysdeps/ieee754/ldbl-64-128/strtold_l.c: Include
<bits/floatn.h>.
[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128] (strtof128_l):
Define and later undefine as macro. Define as weak alias if
[!USE_WIDE_CHAR].
[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128] (wcstof128_l):
Define and later undefine as macro. Define as weak alias if
[USE_WIDE_CHAR].
This patch adds support for building strfromf128 as an alias of
strfroml, in the case of __HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch. Also tested together with
changes to enable float128 aliases.
* stdlib/strfroml.c: Include <bits/floatn.h>.
[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128] (strfromf128):
Define before include of <stdlib.h> and undefine afterwards, then
define as weak alias.
Hide internal __new_exitfn function to allow direct access within libc.so
and libc.a without using GOT nor PLT.
[BZ #18822]
* stdlib/exit.h (__new_exitfn): Add attribute_hidden.
POSIX requires that dlclose() and exit() be thread safe, therefore
you can have one thread in the middle of dlclose() and another thread
executing exit() without causing any undefined behaviour on the part
of the implementation.
The existing implementation had a flaw that exit() exit handler processing
did not consider a concurrent dlclose() and would not mark already run
exit handlers using the ef_free flavour. The consequence of this is that
a concurrent exit() with dlclose() will run all the exit handlers that
dlclose() had not yet run, but then will block on the loader lock. The
concurrent dlclose() will continue to run all the exit handlers again
(twice) in violation of the Itanium C++ ABI requirements for __cxa_atexit().
This commit fixes this by having exit() mark all handlers with ef_free to
ensure that concurrent dlclose() won't re-run registered exit handlers that
have already run.
Hide internal printf functions to allow direct access within libc.so and
libc.a without using GOT nor PLT.
Since __guess_grouping has been changed to take 2 arguments by
commit a1d84548c8
Author: Ulrich Drepper <drepper@redhat.com>
Date: Fri Feb 11 18:50:36 2000 +0000
the third argument passed to __guess_grouping is removed.
[BZ #18822]
[BZ #21986]
* include/printf.h (__printf_fphex): Add attribute_hidden.
(__guess_grouping): New prototype.
* stdio-common/printf_fp.c (__guess_grouping): Removed.
* stdio-common/reg-printf.c (__register_printf_specifier): Add
libc_hidden_proto and libc_hidden_def.
* stdlib/strfmon_l.c (__guess_grouping): Removed.
(__vstrfmon_l): Remove the third argument passed to
__guess_grouping.
The test cases should expose non-standard grouping and the trailing
space after the currency sign. After the changes to the Indian
monetary formatting, the Indian formatting still shows the
non-standard grouping. To test the trailing space after the currency
sign I chose the hr_HR locale.
See:
commit 82b3124268bec0609b337dd993e771c93e44cbf2
Author: Akhilesh Kumar <akhilesh.k@samsung.com>
Remove redundant data for LC_MONETARY for Indian locales
sys/cdefs.h has a macro __long_double_t used in two places in glibc.
long double is a standard part of C since C89; there is no need for
such an alias for it. This patch removes that macro and uses long
double directly everywhere. As an implementation-namespace,
undocumented symbol, it should not be considered part of the API for
users, and codesearch.debian.net shows no sign of it being used
outside glibc in a way that would break with this patch.
Tested for x86_64.
* misc/sys/cdefs.h (__long_double_t): Remove.
* stdio-common/printf_fp.c (__printf_fp_l): Use long double
instead of __long_double_t,
* stdlib/strfmon_l.c (__vstrfmon_l): Likewise.
The return type of the getentropy stub is wrongly defined as ssize_t,
while both the <sys/random.h> header and the Linux implementation
define it as int. This patch fixes that.
Changelog:
* stdlib/getentropy.c (getentropy): Change return type to int.
The macro F128 in stdlib/tst-strtod.h is defined to provide the literal
suffix for _Float128 constants. It uses the macro __f128 (), which is
defined in bits/floatn.h to provide the correct literal suffix depending on
what is provided by the compiler.
However, F128 was not being expanded and only worked correctly, when
compiling with GCC 7 (or greater), since F128 is the literal suffix itself.
This patch adds an additional macro expansion so that the macro F128
expands to the correct literal suffix on older compilers.
* stdlib/tst-strtod.h (MMFUNC): New macro to provide an addition
macro expansion.
(GEN_TEST_STRTOD_FOREACH): Use MMFUNC for _Float128.
<locale.h> is specified to define locale_t in POSIX.1-2008, and so are
all of the headers that define functions that take locale_t arguments.
Under _GNU_SOURCE, the additional headers that define such functions
have also always defined locale_t. Therefore, there is no need to use
__locale_t in public function prototypes, nor in any internal code.
* ctype/ctype-c99_l.c, ctype/ctype.h, ctype/ctype_l.c
* include/monetary.h, include/stdlib.h, include/time.h
* include/wchar.h, locale/duplocale.c, locale/freelocale.c
* locale/global-locale.c, locale/langinfo.h, locale/locale.h
* locale/localeinfo.h, locale/newlocale.c
* locale/nl_langinfo_l.c, locale/uselocale.c
* localedata/bug-usesetlocale.c, localedata/tst-xlocale2.c
* stdio-common/vfscanf.c, stdlib/monetary.h, stdlib/stdlib.h
* stdlib/strfmon_l.c, stdlib/strtod_l.c, stdlib/strtof_l.c
* stdlib/strtol.c, stdlib/strtol_l.c, stdlib/strtold_l.c
* stdlib/strtoll_l.c, stdlib/strtoul_l.c, stdlib/strtoull_l.c
* string/strcasecmp.c, string/strcoll_l.c, string/string.h
* string/strings.h, string/strncase.c, string/strxfrm_l.c
* sysdeps/ieee754/float128/strtof128_l.c
* sysdeps/ieee754/float128/wcstof128.c
* sysdeps/ieee754/float128/wcstof128_l.c
* sysdeps/ieee754/ldbl-128ibm/strtold_l.c
* sysdeps/ieee754/ldbl-64-128/strtold_l.c
* sysdeps/ieee754/ldbl-opt/nldbl-compat.c
* sysdeps/ieee754/ldbl-opt/nldbl-strfmon_l.c
* sysdeps/ieee754/ldbl-opt/nldbl-strtold_l.c
* sysdeps/ieee754/ldbl-opt/nldbl-wcstold_l.c
* sysdeps/powerpc/powerpc32/power7/strcasecmp.S
* sysdeps/powerpc/powerpc64/power7/strcasecmp.S
* sysdeps/x86_64/strcasecmp_l-nonascii.c
* sysdeps/x86_64/strncase_l-nonascii.c, time/strftime_l.c
* time/strptime_l.c, time/time.h, wcsmbs/mbsrtowcs_l.c
* wcsmbs/wchar.h, wcsmbs/wcscasecmp.c, wcsmbs/wcsncase.c
* wcsmbs/wcstod.c, wcsmbs/wcstod_l.c, wcsmbs/wcstof.c
* wcsmbs/wcstof_l.c, wcsmbs/wcstol_l.c, wcsmbs/wcstold.c
* wcsmbs/wcstold_l.c, wcsmbs/wcstoll_l.c, wcsmbs/wcstoul_l.c
* wcsmbs/wcstoull_l.c, wctype/iswctype_l.c
* wctype/towctrans_l.c, wctype/wcfuncs_l.c
* wctype/wctrans_l.c, wctype/wctype.h, wctype/wctype_l.c:
Change all uses of __locale_t to locale_t.
xlocale.h is already a single-type micro-header, defining struct
__locale_struct and the typedefs __locale_t and locale_t. This patch
brings it into the bits/types/ scheme: there are now
bits/types/__locale_t.h which defines only __locale_struct and
__locale_t, and bits/types/locale_t.h which defines locale_t as well
as the other two. None of *our* headers need __locale_t.h, but it
appears to me that libstdc++ could make use of it.
There are a lot of external uses of xlocale.h, but all the uses I
checked had an autoconf test or equivalent for its existence. It has
never been available from other C libraries, and it has always
contained a comment reading "This file is not standardized, don't rely
on it, it can go away without warning" so I think dropping it is
pretty safe.
I also took the opportunity to clean up comments in various public
header files that still talk about the *_l interfaces as though they
were completely nonstandard. There are a few of them, notably the
strtoX_l and wcstoX_l families, that haven't been standardized, but
the bulk are in POSIX.1-2008.
* locale/xlocale.h: Rename to...
* locale/bits/types/__locale_t.h: ...here. Adjust commentary.
Only define struct __locale_struct and __locale_t, not locale_t.
* locale/bits/types/locale_t.h: New file; define locale_t here.
* locale/Makefile (headers): Update to match.
* include/xlocale.h: Delete wrapper.
* include/bits/types/__locale_t.h: New wrapper.
* include/bits/types/locale_t.h: New wrapper.
* ctype/ctype.h, include/printf.h, include/time.h
* locale/langinfo.h, locale/locale.h, stdlib/monetary.h
* stdlib/stdlib.h, string/string.h, string/strings.h, time/time.h
* wcsmbs/wchar.h, wctype/wctype.h: Use bits/types/locale_t.h.
Correct outdated comments regarding the standardization status of
the functions that take locale_t arguments.
* stdlib/strtod_l.c, stdlib/strtof_l.c, stdlib/strtol_l.c
* stdlib/strtold_l.c, stdlib/strtoul_l.c, stdlib/strtoull_l.c
* sysdeps/ieee754/ldbl-128ibm/strtold_l.c
* sysdeps/ieee754/ldbl-64-128/strtold_l.c
* wcsmbs/wcstod.c, wcsmbs/wcstod_l.c, wcsmbs/wcstof.c
* wcsmbs/wcstof_l.c, wcsmbs/wcstold.c, wcsmbs/wcstold_l.c:
Don't include xlocale.h. If necessary, include locale.h instead.
* stdlib/strtold_l.c: Unconditionally include wchar.h.
This is fairly complicated, not because the users of __need_Emath and
__need_error_t have complicated requirements, but because the core
changes had a lot of fallout.
__need_error_t exists for gnulib compatibility in argz.h and argp.h.
error_t itself is a Hurdism, an enum containing all the E-constants,
so you can do 'p (error_t) errno' in gdb and get a symbolic value.
argz.h and argp.h use it for function return values, and they want to
fall back to 'int' when that's not available. There is no reason why
these nonstandard headers cannot just go ahead and include all of
errno.h; so we do that.
__need_Emath is defined only by .S files; what they _really_ need is
for errno.h to avoid declaring anything other than the E-constants
(e.g. 'extern int __errno_location(void);' is a syntax error in
assembly language). This is replaced with a check for __ASSEMBLER__ in
errno.h, plus a carefully documented requirement for bits/errno.h not
to define anything other than macros. That in turn has the
consequence that bits/errno.h must not define errno - fortunately, all
live ports use the same definition of errno, so I've moved it to
errno.h. The Hurd bits/errno.h must also take care not to define
error_t when __ASSEMBLER__ is defined, which involves repeating all of
the definitions twice, but it's a generated file so that's okay.
* stdlib/errno.h: Remove __need_Emath and __need_error_t logic.
Reorganize file. Declare errno here. When __ASSEMBLER__ is
defined, don't declare anything other than the E-constants.
* include/errno.h: Change conditional for exposing internal
declarations to (not _ISOMAC and not __ASSEMBLER__).
* bits/errno.h: Remove logic for __need_Emath. Document
requirements for a port-specific bits/errno.h.
* sysdeps/unix/sysv/linux/bits/errno.h
* sysdeps/unix/sysv/linux/alpha/bits/errno.h
* sysdeps/unix/sysv/linux/hppa/bits/errno.h
* sysdeps/unix/sysv/linux/mips/bits/errno.h
* sysdeps/unix/sysv/linux/sparc/bits/errno.h:
Add multiple-include guard and check against improper inclusion.
Remove __need_Emath logic. Don't declare errno here. Ensure all
constants are defined as simple integer literals. Consistent
formatting.
* sysdeps/mach/hurd/errnos.awk: Likewise. Only define error_t and
enum __error_t_codes if __ASSEMBLER__ is not defined.
* sysdeps/mach/hurd/bits/errno.h: Regenerate.
* argp/argp.h, string/argz.h: Don't define __need_error_t before
including errno.h.
* sysdeps/i386/i686/fpu/multiarch/s_cosf-sse2.S
* sysdeps/i386/i686/fpu/multiarch/s_sincosf-sse2.S
* sysdeps/i386/i686/fpu/multiarch/s_sinf-sse2.S
* sysdeps/x86_64/fpu/s_cosf.S
* sysdeps/x86_64/fpu/s_sincosf.S
* sysdeps/x86_64/fpu/s_sinf.S:
Just include errno.h; don't define __need_Emath or include
bits/errno.h directly.
The implementations are contained with sysdeps/ieee754/float128 as
they are only built when _Float128 is enabled within libc/m.
* include/gmp.h (__mpn_construct_float128): New declaration.
* include/stdlib.h: Include bits/floatn.h for _Float128 tests.
(__strtof128_l): New declaration.
(__strtof128_nan): Likewise.
(__wcstof128_nan): Likewise.
(__strtof128_internal): Likewise.
(____strtof128_l_internal): Likewise.
* include/wchar.h: Include bits/floatn.h for _Float128 tests.
(__wcstof128_l): New declaration.
(__wcstof128_internal): Likewise.
* stdlib/Makefile (bug-strtod2): Link libm too.
* stdlib/stdlib.h (strtof128): New declaration.
(strtof128_l): Likewise.
* stdlib/tst-strtod-nan-locale-main.c: Updated to use
tst-strtod.h macros to ensure float128 gets tested too.
* stdlib/tst-strtod-round-skeleton.c (CHOOSE_f128): New macro.
* stdlib/tst-strtod.h: Include bits/floatn.h for _Float128
tests.
(IF_FLOAT128): New macro.
(GEN_TEST_STRTOD): Update to optionally include _Float128 in
the tests.
(STRTOD_TEST_FOREACH): Likewise.
* sysdeps/ieee754/float128/Makefile: Insert new strtof128 and
wcstof128 functions into libc.
* sysdeps/ieee754/float128/Versions: Add exports for the above
new functions.
* sysdeps/ieee754/float128/mpn2float128.c: New file.
* sysdeps/ieee754/float128/strtod_nan_float128.h: New file.
* sysdeps/ieee754/float128/strtof128.c: New file.
* sysdeps/ieee754/float128/strtof128_l.c: New file.
* sysdeps/ieee754/float128/strtof128_nan.c: New file.
* sysdeps/ieee754/float128/wcstof128.c: New file.
* sysdeps/ieee754/float128/wcstof128_l.c: New file.
* sysdeps/ieee754/float128/wcstof128_nan.c: New fike.
* wcsmbs/Makefile: (CFLAGS-wcstof128.c): Append strtox-CFLAGS.
(CFLAGS-wcstof128_l): Likewise.
* wcsmbs/wchar.h: Include bits/floatn.h for _Float128 tests.
(wcstof128): New declaration.
(wcstof128_l): Likewise.
Add strfromf128 to stdlib when _Float128 support is enabled.
* stdio-common/printf-parsemb.c (__parse_one_specmb): Initialize
spec->info.is_binary128 to zero.
* stdio-common/printf.h (printf_info): Add new member is_binary128
to indicate that the number being converted to string is compatible
with the IEC 60559 binary128 format.
* stdio-common/printf_fp.c (__printf_fp_l): Add code to deal with
_Float128 numbers.
* stdio-common/printf_fphex.c: Include ieee754_float128.h and
ldbl-128/printf_fphex_macros.h
(__printf_fphex): Add code to deal with _Float128 numbers.
* stdio-common/printf_size.c (__printf_size): Likewise.
* stdio-common/vfprintf.c (process_arg): Initialize member
info.is_binary128 to zero.
* stdlib/fpioconst.h (FLT128_MAX_10_EXP_LOG): New macro.
* stdlib/stdlib.h: Include bits/floatn.h for _Float128 support.
(strfromf128): New declaration.
* stdlib/strfrom-skeleton.c (STRFROM): Set member info.is_binary128
to one.
* sysdeps/ieee754/float128/Makefile: Add strfromf128.
* sysdeps/ieee754/float128/Versions: Likewise.
* sysdeps/ieee754/float128/strfromf128.c: New file.
Reuse the code for __mpn_extract_long_double to implement
__mpn_extract_float128.
* include/gmp.h: Include bits/floatn.h
(__mpn_extract_float128): Declare when __HAVE_DISTINCT_FLOAT128 is 1.
* stdlib/gmp-impl.h: Also check if alloca is not defined before
including stack-alloc.h. It could have been defined by other header
which not necessarily defines HAVE_ALLOCA.
* sysdeps/ieee754/float128/Makefile: New file.
* sysdeps/ieee754/float128/float1282mpn.c: New file.
* sysdeps/ieee754/float128/float128_private.h: Include gmp.h before
redefining __mpn_extract_long_double to __mpn_extract_float128, then
redefine __mpn_extract_long_double to __mpn_extract_float128.
* sysdeps/ieee754/ldbl-128/ldbl2mpn.c: Replace long double with
_Float128 to allow float128_private.h overrides.
Update the power of ten tables used by the common implementation when long
double is not the most expressive real type.
* stdlib/fpioconst.h: Include bits/floatn.h.
(FPIOCONST_HAVE_EXTENDED_RANGE): New macro for testing how big the
power of ten table should be.
(FPIOCONST_POW10_ARRAY_SIZE): Use larger table if above is true.
* stdlib/fpioconst.c (__tens): Use FPIOCONST_HAVE_EXTENDED_RANGE
to include larger tables when _Float128 support is enabled.
(_fpioconst_pow10): Likewise.
In stdlib/gmp-impl.h, the macros MAX and MIN are defined exactly the same
as in sys/param.h. This patch removes the redefinition and makes
gmp-impl.h include sys/param.h instead.
Tested for powerpc64le and s390x.
* stdlib/gmp-impl.h: Include sys/param.h instead of redefining the
macros MAX and MIN.
The types affected are __sig_atomic_t, sig_atomic_t, __sigset_t,
sigset_t, sigval_t, sigevent_t, and siginfo_t. __sig_atomic_t is a
scalar, so it's now directly available from bits/types.h. The others
get bits/types/ headers.
Side effects include: There have been small changes to which
non-signal headers expose which subset of the signal-related types.
A couple of architectures' nested siginfo_t fields had to be renamed
to prevent undesired macro expansion. Internal code that wants to
manipulate signal masks must now include <sigsetops.h> (which is not
installed) and should be aware that __sigaddset, __sigandset,
__sigdelset, __sigemptyset, and __sigorset no longer return a value
(unlike the public API). Relatedly, the public signal.h no longer
declares any of those functions. The obsolete sigmask() macro no
longer has a system-specific definition -- in the cases where it
matters, it didn't work anyway.
New Linux architectures should create bits/siginfo-arch.h and/or
bits/siginfo-consts-arch.h to customize their siginfo_t, rather than
duplicating everything in bits/siginfo.h (which no longer exists).
Add new __SI_* macros if necessary. Ports to other operating systems
are strongly encouraged to generalize this scheme further.
* bits/sigevent-consts.h
* bits/siginfo-consts.h
* bits/types/__sigset_t.h
* bits/types/sigevent_t.h
* bits/types/siginfo_t.h
* sysdeps/unix/sysv/linux/bits/sigevent-consts.h
* sysdeps/unix/sysv/linux/bits/siginfo-consts.h
* sysdeps/unix/sysv/linux/bits/types/__sigset_t.h
* sysdeps/unix/sysv/linux/bits/types/sigevent_t.h
* sysdeps/unix/sysv/linux/bits/types/siginfo_t.h:
New system-dependent bits headers.
* sysdeps/unix/sysv/linux/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/bits/siginfo-consts-arch.h
* sysdeps/unix/sysv/linux/ia64/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/ia64/bits/siginfo-consts-arch.h
* sysdeps/unix/sysv/linux/mips/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/sparc/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/tile/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/tile/bits/siginfo-consts-arch.h
* sysdeps/unix/sysv/linux/x86/bits/siginfo-arch.h:
New Linux-only system-dependent bits headers.
* signal/bits/types/sig_atomic_t.h
* signal/bits/types/sigset_t.h
* signal/bits/types/sigval_t.h:
New non-system-dependent bits headers.
* sysdeps/generic/sigsetops.h
* sysdeps/unix/sysv/linux/sigsetops.h:
New internal headers.
* include/bits/types/sig_atomic_t.h
* include/bits/types/sigset_t.h
* include/bits/types/sigval_t.h:
New wrappers.
* signal/sigsetops.h
* bits/siginfo.h
* bits/sigset.h
* sysdeps/unix/sysv/linux/bits/siginfo.h
* sysdeps/unix/sysv/linux/bits/sigset.h
* sysdeps/unix/sysv/linux/ia64/bits/siginfo.h
* sysdeps/unix/sysv/linux/mips/bits/siginfo.h
* sysdeps/unix/sysv/linux/s390/bits/siginfo.h
* sysdeps/unix/sysv/linux/sparc/bits/siginfo.h
* sysdeps/unix/sysv/linux/tile/bits/siginfo.h
* sysdeps/unix/sysv/linux/x86/bits/siginfo.h:
Deleted.
* signal/Makefile, sysdeps/unix/sysv/linux/Makefile:
Update lists of installed headers.
* posix/bits/types.h: Define __sig_atomic_t here.
* signal/signal.h: Use the new bits headers; no need to handle
__need_sig_atomic_t nor __need_sigset_t. Don't use __sigmask
to define sigmask.
* include/signal.h: No need to handle __need_sig_atomic_t
nor __need_sigset_t. Don't define __sigemptyset.
* io/sys/poll.h, setjmp/setjmp.h
* sysdeps/arm/sys/ucontext.h, sysdeps/generic/sys/ucontext.h
* sysdeps/i386/sys/ucontext.h, sysdeps/m68k/sys/ucontext.h
* sysdeps/mach/hurd/i386/bits/sigcontext.h
* sysdeps/mips/sys/ucontext.h, sysdeps/powerpc/novmxsetjmp.h
* sysdeps/pthread/bits/sigthread.h
* sysdeps/unix/sysv/linux/hppa/sys/ucontext.h
* sysdeps/unix/sysv/linux/m68k/sys/ucontext.h
* sysdeps/unix/sysv/linux/mips/sys/ucontext.h
* sysdeps/unix/sysv/linux/nios2/sys/ucontext.h
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h
* sysdeps/unix/sysv/linux/s390/sys/ucontext.h
* sysdeps/unix/sysv/linux/sh/sys/ucontext.h
* sysdeps/unix/sysv/linux/sparc/sys/ucontext.h
* sysdeps/unix/sysv/linux/tile/sys/ucontext.h
* sysdeps/unix/sysv/linux/x86/sys/ucontext.h:
Use bits/types/__sigset_t.h.
* misc/sys/select.h, posix/spawn.h
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h
* sysdeps/unix/sysv/linux/sys/epoll.h
* sysdeps/unix/sysv/linux/sys/signalfd.h:
Use bits/types/sigset_t.h.
* resolv/netdb.h, rt/mqueue.h: Use bits/types/sigevent_t.h.
* rt/aio.h: Use bits/types/sigevent_t.h and bits/sigevent-consts.h.
* socket/sys/socket.h: Don't include bits/sigset.h.
* login/utmp_file.c, shadow/lckpwdf.c, signal/sigandset.c
* signal/sigisempty.c, stdlib/abort.c, sysdeps/posix/profil.c
* sysdeps/posix/sigignore.c, sysdeps/posix/sigintr.c
* sysdeps/posix/signal.c, sysdeps/posix/sigset.c
* sysdeps/posix/sprofil.c, sysdeps/posix/sysv_signal.c
* sysdeps/unix/sysv/linux/nptl-signals.h:
Include sigsetops.h.
* signal/sigaddset.c, signal/sigandset.c, signal/sigdelset.c
* signal/sigorset.c, stdlib/abort.c, sysdeps/posix/sigignore.c
* sysdeps/posix/signal.c, sysdeps/posix/sigset.c:
__sigaddset, __sigandset, __sigdelset, __sigemptyset, __sigorset
now return no value.
* signal/sigaddset.c, signal/sigdelset.c, signal/sigismem.c
Include <errno.h>, <signal.h>, and <sigsetops.h> instead of
"sigsetops.h".
* signal/sigsetops.c: Explicitly define __sigismember,
__sigaddset, and __sigdelset as compatibility symbols.
* signal/Versions: Correct commentary on __sigpause,
__sigaddset, __sigdelset, __sigismember.
* inet/rcmd.c: Include sigsetops.h. Convert old code using
__sigblock/__sigsetmask to use __sigprocmask and friends.
This patch adds a new build module called 'testsuite'.
IS_IN (testsuite) implies _ISOMAC, as do IS_IN_build and __cplusplus
(which means several ad-hoc tests for __cplusplus can go away).
libc-symbols.h now suppresses almost all of *itself* when _ISOMAC is
defined; in particular, _ISOMAC mode does not get config.h
automatically anymore.
There are still quite a few tests that need to see internal gunk of
one variety or another. For them, we now have 'tests-internal' and
'test-internal-extras'; files in this category will still be compiled
with MODULE_NAME=nonlib, and everything proceeds as it always has.
The bulk of this patch is moving tests from 'tests' to
'tests-internal'. There is also 'tests-static-internal', which has
the same effect on files in 'tests-static', and 'modules-names-tests',
which has the *inverse* effect on files in 'modules-names' (it's
inverted because most of the things in modules-names are *not* tests).
For both of these, the file must appear in *both* the new variable and
the old one.
There is also now a special case for when libc-symbols.h is included
without MODULE_NAME being defined at all. (This happens during the
creation of libc-modules.h, and also when preprocessing Versions
files.) When this happens, IS_IN is set to be always false and
_ISOMAC is *not* defined, which was the status quo, but now it's
explicit.
The remaining changes to C source files in this patch seemed likely to
cause problems in the absence of the main change. They should be
relatively self-explanatory. In a few cases I duplicated a definition
from an internal header rather than move the test to tests-internal;
this was a judgement call each time and I'm happy to change those
however reviewers feel is more appropriate.
* Makerules: New subdir configuration variables 'tests-internal'
and 'test-internal-extras'. Test files in these categories will
still be compiled with MODULE_NAME=nonlib. Test files in the
existing categories (tests, xtests, test-srcs, test-extras) are
now compiled with MODULE_NAME=testsuite.
New subdir configuration variable 'modules-names-tests'. Files
which are in both 'modules-names' and 'modules-names-tests' will
be compiled with MODULE_NAME=testsuite instead of
MODULE_NAME=extramodules.
(gen-as-const-headers): Move to tests-internal.
(do-tests-clean, common-mostlyclean): Support tests-internal.
* Makeconfig (built-modules): Add testsuite.
* Makefile: Change libof-check-installed-headers-c and
libof-check-installed-headers-cxx to 'testsuite'.
* Rules: Likewise. Support tests-internal.
* benchtests/strcoll-inputs/filelist#en_US.UTF-8:
Remove extra-modules.mk.
* config.h.in: Don't check for __OPTIMIZE__ or __FAST_MATH__ here.
* include/libc-symbols.h: Move definitions of _GNU_SOURCE,
PASTE_NAME, PASTE_NAME1, IN_MODULE, IS_IN, and IS_IN_LIB to the
very top of the file and rationalize their order.
If MODULE_NAME is not defined at all, define IS_IN to always be
false, and don't define _ISOMAC.
If any of IS_IN (testsuite), IS_IN_build, or __cplusplus are
true, define _ISOMAC and suppress everything else in this file,
starting with the inclusion of config.h.
Do check for inappropriate definitions of __OPTIMIZE__ and
__FAST_MATH__ here, but only if _ISOMAC is not defined.
Correct some out-of-date commentary.
* include/math.h: If _ISOMAC is defined, undefine NO_LONG_DOUBLE
and _Mlong_double_ before including math.h.
* include/string.h: If _ISOMAC is defined, don't expose
_STRING_ARCH_unaligned. Move a comment to a more appropriate
location.
* include/errno.h, include/stdio.h, include/stdlib.h, include/string.h
* include/time.h, include/unistd.h, include/wchar.h: No need to
check __cplusplus nor use __BEGIN_DECLS/__END_DECLS.
* misc/sys/cdefs.h (__NTHNL): New macro.
* sysdeps/m68k/m680x0/fpu/bits/mathinline.h
(__m81_defun): Use __NTHNL to avoid errors with GCC 6.
* elf/tst-env-setuid-tunables.c: Include config.h with _LIBC
defined, for HAVE_TUNABLES.
* inet/tst-checks-posix.c: No need to define _ISOMAC.
* intl/tst-gettext2.c: Provide own definition of N_.
* math/test-signgam-finite-c99.c: No need to define _ISOMAC.
* math/test-signgam-main.c: No need to define _ISOMAC.
* stdlib/tst-strtod.c: Convert to test-driver. Split locale_test to...
* stdlib/tst-strtod1i.c: ...this new file.
* stdlib/tst-strtod5.c: Convert to test-driver and add copyright notice.
Split tests of __strtod_internal to...
* stdlib/tst-strtod5i.c: ...this new file.
* string/test-string.h: Include stdint.h. Duplicate definition of
inhibit_loop_to_libcall here (from libc-symbols.h).
* string/test-strstr.c: Provide dummy definition of
libc_hidden_builtin_def when including strstr.c.
* sysdeps/ia64/fpu/libm-symbols.h: Suppress entire file in _ISOMAC
mode; no need to test __STRICT_ANSI__ nor __cplusplus as well.
* sysdeps/x86_64/fpu/math-tests-arch.h: Include cpu-features.h.
Don't include init-arch.h.
* sysdeps/x86_64/multiarch/test-multiarch.h: Include cpu-features.h.
Don't include init-arch.h.
* elf/Makefile: Move tst-ptrguard1-static, tst-stackguard1-static,
tst-tls1-static, tst-tls2-static, tst-tls3-static, loadtest,
unload, unload2, circleload1, neededtest, neededtest2,
neededtest3, neededtest4, tst-tls1, tst-tls2, tst-tls3,
tst-tls6, tst-tls7, tst-tls8, tst-dlmopen2, tst-ptrguard1,
tst-stackguard1, tst-_dl_addr_inside_object, and all of the
ifunc tests to tests-internal.
Don't add $(modules-names) to test-extras.
* inet/Makefile: Move tst-inet6_scopeid_pton to tests-internal.
Add tst-deadline to tests-static-internal.
* malloc/Makefile: Move tst-mallocstate and tst-scratch_buffer to
tests-internal.
* misc/Makefile: Move tst-atomic and tst-atomic-long to tests-internal.
* nptl/Makefile: Move tst-typesizes, tst-rwlock19, tst-sem11,
tst-sem12, tst-sem13, tst-barrier5, tst-signal7, tst-tls3,
tst-tls3-malloc, tst-tls5, tst-stackguard1, tst-sem11-static,
tst-sem12-static, and tst-stackguard1-static to tests-internal.
Link tests-internal with libpthread also.
Don't add $(modules-names) to test-extras.
* nss/Makefile: Move tst-field to tests-internal.
* posix/Makefile: Move bug-regex5, bug-regex20, bug-regex33,
tst-rfc3484, tst-rfc3484-2, and tst-rfc3484-3 to tests-internal.
* stdlib/Makefile: Move tst-strtod1i, tst-strtod3, tst-strtod4,
tst-strtod5i, tst-tls-atexit, and tst-tls-atexit-nodelete to
tests-internal.
* sunrpc/Makefile: Move tst-svc_register to tests-internal.
* sysdeps/powerpc/Makefile: Move test-get_hwcap and
test-get_hwcap-static to tests-internal.
* sysdeps/unix/sysv/linux/Makefile: Move tst-setgetname to
tests-internal.
* sysdeps/x86_64/fpu/Makefile: Add all libmvec test modules to
modules-names-tests.
conform/ namespace tests of arpa/inet.h, netdb.h and netinet/in.h fail
for UNIX98 and XPG42 because of inclusion of stdint.h, which defines
macros not permitted in those headers for those standards. UNIX98
allows them to include inttypes.h, but (predating C99) has restricted
inttypes.h contents (not yet tested in the conform/ tests) not
including those macros; XPG4.2 has no such permission and no
inttypes.h / stdint.h at all.
This patch rearranges the headers to avoid this issue. intN_t
definitions move to bits/stdint-intn.h, and uintN_t definitions to
bits/stdint-uintn.h. (These are not bits/types/ headers because they
each define four types. They are separate rather than just a single
header because sys/types.h defines intN_t but u_intN_t rather than
uintN_t - and while sys/types.h could define uintN_t because of the
POSIX reservation of *_t, existing practice there is largely to
condition types on appropriate feature test macros, and indeed there
is at least one open bug report (14553) about a type that's not
so-conditioned, so maybe types there should actually have conditions
added where appropriate.) The affected network headers are then made
to include bits/stdint-uintn.h instead of stdint.h. This allows six
XFAILs to be removed.
This doesn't do anything about inttypes.h defining more than it should
for UNIX98, but we don't have conformtest expectations for that case
at present (and my inclination is that a fix for that should be as
local as possible - affecting only inttypes.h, not stdint.h, only for
the case of __USE_UNIX98 && !__USE_ISOC99).
Tested for x86_64.
[BZ #21455]
* bits/stdint-intn.h: New file.
* bits/stdint-uintn.h: Likewise.
* stdlib/Makefile (headers): Add bits/stdint-intn.h and
bits/stdint-uintn.h.
* inet/netinet/in.h: Include <bits/stdint-uintn.h> instead of
<stdint.h>.
* posix/sys/types.h: Include <bits/stdint-intn.h>.
(__int8_t_defined): Do not define here.
(int8_t): Likewise.
(int16_t): Likewise.
(int32_t): Likewise.
(int64_t): Likewise.
[__GNUC_PREREQ (2, 7)] (__intN_t): Likewise.
* resolv/netdb.h: Include <bits/stdint-uintn.h> instead of
<stdint.h>.
* include/netdb.h [_ISOMAC]: Do not include <stdint.h>.
* sysdeps/generic/stdint.h: Include <bits/stdint-intn.h> and
<bits/stdint-uintn.h>.
(int8_t): Do not define here.
(int16_t): Likewise.
(int32_t): Likewise.
(int64_t): Likewise.
(uint8_t): Likewise.
(uint16_t): Likewise.
(uint32_t): Likewise.
(uint64_t): Likewise.
* conform/Makefile (test-xfail-XPG42/arpa/inet.h/conform): Remove
variable.
(test-xfail-XPG42/netdb.h/conform): Likewise.
(test-xfail-XPG42/netinet/in.h/conform): Likewise.
(test-xfail-UNIX98/arpa/inet.h/conform): Likewise.
(test-xfail-UNIX98/netdb.h/conform): Likewise.
(test-xfail-UNIX98/netinet/in.h/conform): Likewise.
As noted in
<https://sourceware.org/ml/libc-alpha/2012-12/msg00240.html>,
stdlib/Versions and wcsmbs/Versions list some functions as
__strto*_internal and __wcsto*_internal rather than explicitly listing
the symbols to be exported (so any new internal function matching one
of those patterns would be wrongly added to version GLIBC_2.0), which
seems like a bad idea. This patch changes those files to list the
exported symbols explicitly. There are still entries in
sysdeps/nacl/Versions for __nacl_irt_*, but as GLIBC_PRIVATE symbols
that seems less significant.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by the patch.
* stdlib/Versions (__strtod_internal): List explicitly, not as
wildcard.
(__strtof_internal): Likewise.
(__strtold_internal): Likewise.
(__strtol_internal): Likewise.
(__strtoll_internal): Likewise.
(__strtoul_internal): Likewise.
(__strtoull_internal): Likewise.
(__strtoq_internal): Likewise.
(__strtouq_internal): Likewise.
* wcsmbs/Versions (__wcstod_internal): Likewise.
(__wcstof_internal): Likewise.
(__wcstold_internal): Likewise.
(__wcstol_internal): Likewise.
(__wcstoll_internal): Likewise.
(__wcstoul_internal): Likewise.
(__wcstoull_internal): Likewise.
glibc headers include some code (not particularly consistent or
systematic) to put various declarations in C++ namespaces std and
__c99, if _GLIBCPP_USE_NAMESPACES is defined.
As noted in <https://gcc.gnu.org/ml/libstdc++/2017-03/msg00025.html>,
this macro was removed from libstdc++ in 2000. I don't expect
compilation with such old versions of libstdc++ to work with current
glibc headers anyway (whereas old *binaries* are expected to stay
working with current glibc); this patch (which should be a no-op with
any libstdc++ version postdating that removal) removes all this code
from the glibc headers.
The begin-end-check.pl test, whose comments say it is about checking
these namespace macro calls, is also removed. The code in that test
would have covered __BEGIN_DECLS / __END_DECLS as well, but if those
weren't properly matched it would show up with the
check-installed-headers-cxx tests, so I don't think there is an actual
use for keeping begin-end-check.pl with the namespace code removed.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* misc/sys/cdefs.h (__BEGIN_NAMESPACE_STD): Remove macro.
(__END_NAMESPACE_STD): Likewise.
(__USING_NAMESPACE_STD): Likewise.
(__BEGIN_NAMESPACE_C99): Likewise.
(__END_NAMESPACE_C99): Likewise.
(__USING_NAMESPACE_C99): Likewise.
* math/math.h (_Mdouble_BEGIN_NAMESPACE): Do not define and
undefine macro.
(_Mdouble_END_NAMESPACE): Likewise.
* ctype/ctype.h: Do not handle C++ namespaces.
* libio/bits/stdio-ldbl.h: Likewise.
* libio/stdio.h: Likewise.
* locale/locale.h: Likewise.
* math/bits/mathcalls.h: Likewise.
* setjmp/setjmp.h: Likewise.
* signal/signal.h: Likewise.
* stdlib/bits/stdlib-float.h: Likewise.
* stdlib/bits/stdlib-ldbl.h: Likewise.
* stdlib/stdlib.h: Likewise.
* string/string.h: Likewise.
* sysdeps/x86/fpu/bits/mathinline.h: Likewise.
* time/bits/types/clock_t.h: Likewise.
* time/bits/types/struct_tm.h: Likewise.
* time/bits/types/time_t.h: Likewise.
* time/time.h: Likewise.
* wcsmbs/bits/wchar-ldbl.h: Likewise.
* wcsmbs/uchar.h: Likewise.
* wcsmbs/wchar.h: Likewise.
[_GLIBCPP_USE_NAMESPACES] (wint_t): Remove conditional definition.
* wctype/wctype.h: Do not handle C++ namespaces.
* scripts/begin-end-check.pl: Remove.
* Makefile (installed-headers): Likewise.
(tests-special): Do not add $(objpfx)begin-end-check.out.
($(objpfx)begin-end-check.out): Remove.
calls with constant strings shows a small (~10%) performance gain, strdup is
typically used in error reporting code, so not performance critical.
Remove the now unused __need_malloc_and_calloc related defines from stdlib.h.
Rename existing uses of str(n)dup to __str(n)dup so it no longer needs to be
redirected to a builtin. Also building GLIBC with -Os now no longer shows
localplt or linkname space failures (partial fix for BZ #15105 and BZ #19463).
[BZ #15105]
[BZ #19463]
* elf/dl-cache.c (_dl_load_cache_lookup): Use __strdup.
* inet/rcmd.c (rcmd_af): Likewise.
* inet/rexec.c (rexec_af): Likewise.
* intl/dcigettext.c (_LIBC): Likewise.
* intl/finddomain.c (_nl_find_domain): Use strdup expansion.
* locale/loadarchive.c (_nl_load_locale_from_archive): Use __strdup.
* locale/setlocale.c (setlocale): Likewise.
* posix/spawn_faction_addopen.c
(posix_spawn_file_actions_addopen): Likewise.
* stdlib/putenv.c (putenv): Use __strndup.
* sunrpc/svc_simple.c (__registerrpc): Use __strdup.
* sysdeps/posix/getaddrinfo.c (gaih_inet): Use __strdup/__strndup.
* include/stdlib.h (__need_malloc_and_calloc): Remove uses.
(__Need_M_And_C) Remove define/undef.
* stdlib/stdlib.h (__need_malloc_and_calloc): Remove uses.
(__malloc_and_calloc_defined): Remove define.
* string/bits/string2.h (__strdup): Remove define.
(strdup): Likewise.
(__strndup): Likewise.
(strndup): Likewise.
Quite a few tests include libc-internal.h just for the DIAG_* macros.
Split those macros to their own file, which can be included safely in
_ISOMAC mode. I also moved ignore_value, since it seems logically
related, even though I didn't notice any tests needing it.
Also add -Wnonnull suppressions to two tests that _should_ have them,
but the error is masked when compiling against internal headers.
* include/libc-diag.h: New file. Define ignore_value,
DIAG_PUSH_NEEDS_COMMENT, DIAG_POP_NEEDS_COMMENT,
DIAG_IGNORE_NEEDS_COMMENT, and DIAG_IGNORE_Os_NEEDS_COMMENT here.
* include/libc-internal.h: Definitions of above macros moved from
here. Include libc-diag.h. Add copyright notice.
* malloc/tst-malloc.c, malloc/tst-memcheck.c, malloc/tst-realloc.c
* misc/tst-error1.c, posix/tst-dir.c, stdio-common/bug21.c
* stdio-common/scanf14.c, stdio-common/scanf4.c, stdio-common/scanf7.c
* stdio-common/test-vfprintf.c, stdio-common/tst-printf.c
* stdio-common/tst-printfsz.c, stdio-common/tst-sprintf.c
* stdio-common/tst-unlockedio.c, stdio-common/tstdiomisc.c
* stdlib/bug-getcontext.c, string/tester.c, string/tst-endian.c
* time/tst-strptime2.c, wcsmbs/tst-wcstof.c:
Include libc-diag.h instead of libc-internal.h.
* stdlib/tst-environ.c: Include libc-diag.h. Suppress -Wnonnull for
call to unsetenv (NULL).
* nptl/tst-mutex1.c: Include libc-diag.h. Suppress -Wnonnull for
call to pthread_mutexattr_destroy (NULL).
* crypt/md5.h: Test _LIBC with #if defined, not #if.
* dirent/opendir-tst1.c: Include sys/stat.h.
* dirent/tst-fdopendir.c: Include sys/stat.h.
* dirent/tst-fdopendir2.c: Include stdlib.h.
* dirent/tst-scandir.c: Include stdbool.h.
* elf/tst-auditmod1.c: Include link.h and stddef.h.
* elf/tst-tls15.c: Include stdlib.h.
* elf/tst-tls16.c: Include stdlib.h.
* elf/tst-tls17.c: Include stdlib.h.
* elf/tst-tls18.c: Include stdlib.h.
* iconv/tst-iconv6.c: Include endian.h.
* iconvdata/bug-iconv11.c: Include limits.h.
* io/test-utime.c: Include stdint.h.
* io/tst-faccessat.c: Include sys/stat.h.
* io/tst-fchmodat.c: Include sys/stat.h.
* io/tst-fchownat.c: Include sys/stat.h.
* io/tst-fstatat.c: Include sys/stat.h.
* io/tst-futimesat.c: Include sys/stat.h.
* io/tst-linkat.c: Include sys/stat.h.
* io/tst-mkdirat.c: Include sys/stat.h and stdbool.h.
* io/tst-mkfifoat.c: Include sys/stat.h and stdbool.h.
* io/tst-mknodat.c: Include sys/stat.h and stdbool.h.
* io/tst-openat.c: Include stdbool.h.
* io/tst-readlinkat.c: Include sys/stat.h.
* io/tst-renameat.c: Include sys/stat.h.
* io/tst-symlinkat.c: Include sys/stat.h.
* io/tst-unlinkat.c: Include stdbool.h.
* libio/bug-memstream1.c: Include stdlib.h.
* libio/bug-wmemstream1.c: Include stdlib.h.
* libio/tst-fwrite-error.c: Include stdlib.h.
* libio/tst-memstream1.c: Include stdlib.h.
* libio/tst-memstream2.c: Include stdlib.h.
* libio/tst-memstream3.c: Include stdlib.h.
* malloc/tst-interpose-aux.c: Include stdint.h.
* misc/tst-preadvwritev-common.c: Include sys/stat.h.
* nptl/tst-basic7.c: Include limits.h.
* nptl/tst-cancel25.c: Include pthread.h, not pthreadP.h.
* nptl/tst-cancel4.c: Include stddef.h, limits.h, and sys/stat.h.
* nptl/tst-cancel4_1.c: Include stddef.h.
* nptl/tst-cancel4_2.c: Include stddef.h.
* nptl/tst-cond16.c: Include limits.h.
Use sysconf(_SC_PAGESIZE) instead of __getpagesize.
* nptl/tst-cond18.c: Include limits.h.
Use sysconf(_SC_PAGESIZE) instead of __getpagesize.
* nptl/tst-cond4.c: Include stdint.h.
* nptl/tst-cond6.c: Include stdint.h.
* nptl/tst-stack2.c: Include limits.h.
* nptl/tst-stackguard1.c: Include stddef.h.
* nptl/tst-tls4.c: Include stdint.h. Don't include tls.h.
* nptl/tst-tls4moda.c: Include stddef.h.
Don't include stdio.h, unistd.h, or tls.h.
* nptl/tst-tls4modb.c: Include stddef.h.
Don't include stdio.h, unistd.h, or tls.h.
* nptl/tst-tls5.h: Include stddef.h. Don't include stdlib.h or tls.h.
* posix/tst-getaddrinfo2.c: Include stdio.h.
* posix/tst-getaddrinfo5.c: Include stdio.h.
* posix/tst-pathconf.c: Include sys/stat.h.
* posix/tst-posix_fadvise-common.c: Include stdint.h.
* posix/tst-preadwrite-common.c: Include sys/stat.h.
* posix/tst-regex.c: Include stdint.h.
Don't include spawn.h or spawn_int.h.
* posix/tst-regexloc.c: Don't include spawn.h or spawn_int.h.
* posix/tst-vfork3.c: Include sys/stat.h.
* resolv/tst-bug18665-tcp.c: Include stdlib.h.
* resolv/tst-res_hconf_reorder.c: Include stdlib.h.
* resolv/tst-resolv-search.c: Include stdlib.h.
* stdio-common/tst-fmemopen2.c: Include stdint.h.
* stdio-common/tst-vfprintf-width-prec.c: Include stdlib.h.
* stdlib/test-canon.c: Include sys/stat.h.
* stdlib/tst-tls-atexit.c: Include stdbool.h.
* string/test-memchr.c: Include stdint.h.
* string/tst-cmp.c: Include stdint.h.
* sysdeps/pthread/tst-timer.c: Include stdint.h.
* sysdeps/unix/sysv/linux/tst-sync_file_range.c: Include stdint.h.
* sysdeps/wordsize-64/tst-writev.c: Include limits.h and stdint.h.
* sysdeps/x86_64/fpu/math-tests-arch.h: Include cpu-features.h.
Don't include init-arch.h.
* sysdeps/x86_64/multiarch/test-multiarch.h: Include cpu-features.h.
Don't include init-arch.h.
* sysdeps/x86_64/tst-auditmod10b.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod3b.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod4b.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod5b.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod6b.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod6c.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod7b.c: Include link.h and stddef.h.
* time/clocktest.c: Include stdint.h.
* time/tst-posixtz.c: Include stdint.h.
* timezone/tst-timezone.c: Include stdint.h.
The condition when the value of an envvar is empty (not just '\0'),
the loop in tunables_init gets stuck infinitely because envp is not
incremented. Fix that by always incrementing envp in the loop.
Added test case (tst-empty-env.c) verifies the fix when the source is
configured with --enable-hardcoded-path-in-tests, thanks Josh Stone for
providing the test case. Verified on x86_64.
* elf/dl-tunables (get_next_env): Always advance envp.
* stdlib/tst-empty-env.c: New test case.
* stdlib/Makefile (tests): Use it.
Information about whether the ABI of long double is the same as that
of double is split between bits/mathdef.h and bits/wordsize.h.
When the ABIs are the same, bits/mathdef.h defines
__NO_LONG_DOUBLE_MATH. In addition, in the case where the same glibc
binary supports both -mlong-double-64 and -mlong-double-128,
bits/wordsize.h defines __LONG_DOUBLE_MATH_OPTIONAL, along with
__NO_LONG_DOUBLE_MATH if this particular compilation is with
-mlong-double-64.
As part of the refactoring I proposed in
<https://sourceware.org/ml/libc-alpha/2016-11/msg00745.html>, this
patch puts all that information in a single header,
bits/long-double.h. It is included from sys/cdefs.h alongside the
include of bits/wordsize.h, so other headers generally do not need to
include bits/long-double.h directly.
Previously, various bits/mathdef.h headers and bits/wordsize.h headers
had this long double information (including implicitly in some
bits/mathdef.h headers through not having the defines present in the
default version). After the patch, it's all in six bits/long-double.h
headers. Furthermore, most of those new headers are not
architecture-specific. Architectures with optional long double all
use the ldbl-opt sysdeps directory, either in the order (ldbl-64-128,
ldbl-opt, ldbl-128) or (ldbl-128ibm, ldbl-opt). Thus a generic header
for the case where long double = double, and headers in ldbl-128,
ldbl-96 and ldbl-opt, suffices to cover every architecture except for
cases where long double properties vary between different ABIs sharing
a set of installed headers; fortunately all the ldbl-opt cases share a
single compiler-predefined macro __LONG_DOUBLE_128__ that can be used
to tell whether this compilation is -mlong-double-64 or
-mlong-double-128.
The two cases where a set of headers is shared between ABIs with
different long double properties, MIPS (o32 has long double = double,
other ABIs use ldbl-128) and SPARC (32-bit has optional long double,
64-bit has required long double), need their own bits/long-double.h
headers.
As with bits/wordsize.h, multiple-include protection for this header
is generally implicit through the include guards on sys/cdefs.h, and
multiple inclusion is harmless in any case. There is one subtlety:
the header must not define __LONG_DOUBLE_MATH_OPTIONAL if
__NO_LONG_DOUBLE_MATH was defined before its inclusion, because doing
so breaks how sysdeps/ieee754/ldbl-opt/nldbl-compat.h defines
__NO_LONG_DOUBLE_MATH itself before including system headers. Subject
to keeping that working, it would be reasonable to move these macros
from defined/undefined #ifdef to always-defined 1/0 #if semantics, but
this patch does not attempt to do so, just rearranges where the macros
are defined.
After this patch, the only use of bits/mathdef.h is the alpha one for
modifying complex function ABIs for old GCC. Thus, all versions of
the header other than the default and alpha versions are removed, as
is the include from math.h.
Tested for x86_64 and x86. Also did compilation-only testing with
build-many-glibcs.py.
* bits/long-double.h: New file.
* sysdeps/ieee754/ldbl-128/bits/long-double.h: Likewise.
* sysdeps/ieee754/ldbl-96/bits/long-double.h: Likewise.
* sysdeps/ieee754/ldbl-opt/bits/long-double.h: Likewise.
* sysdeps/mips/bits/long-double.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/long-double.h: Likewise.
* math/Makefile (headers): Add bits/long-double.h.
* misc/sys/cdefs.h: Include <bits/long-double.h>.
* stdlib/strtold.c: Include <bits/long-double.h> instead of
<bits/wordsize.h>.
* bits/mathdef.h [!_COMPLEX_H]: Do not allow inclusion.
[!__NO_LONG_DOUBLE_MATH]: Remove conditional code.
* math/math.h: Do not include <bits/mathdef.h>.
* sysdeps/aarch64/bits/mathdef.h: Remove file.
* sysdeps/alpha/bits/mathdef.h [!_COMPLEX_H]: Do not allow
inclusion.
* sysdeps/ia64/bits/mathdef.h: Remove file.
* sysdeps/m68k/m680x0/bits/mathdef.h: Likewise.
* sysdeps/mips/bits/mathdef.h: Likewise.
* sysdeps/powerpc/bits/mathdef.h: Likewise.
* sysdeps/s390/bits/mathdef.h: Likewise.
* sysdeps/sparc/bits/mathdef.h: Likewise.
* sysdeps/x86/bits/mathdef.h: Likewise.
* sysdeps/s390/s390-32/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]: Remove
conditional code.
* sysdeps/s390/s390-64/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
Likewise.
The macro ENTRY in tst-strfrom.h is used to generate the input values for
each floating-point type (float, double, long double). It should append
the parameter LSUF (Literal suffix) to the floating-point number, but is
using CSUF (C function suffix). This patch fixes it.
Tested for powerpc64le and x86_64.
The new test driver in <support/test-driver.c> has feature parity with
the old one. The main difference is that its hooking mechanism is
based on functions and function pointers instead of macros. This
commit also implements a new environment variable, TEST_COREDUMPS,
which disables the code which disables coredumps (that is, it enables
them if the invocation environment has not disabled them).
<test-skeleton.c> defines wrapper functions so that it is possible to
use existing macros with the new-style hook functionality.
This commit changes only a few test cases to the new test driver, to
make sure that it works as expected.
Doing all-ABIs compile testing produces a compiler warning in
stdlib/bug-getcontext.c on nios2 and tilepro (with GCC 5 branch):
bug-getcontext.c: In function 'do_test':
bug-getcontext.c:53:6: error: 'except_mask' may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (mask != except_mask)
^
This warning appears nonsensical; except_mask is initialized where
it's declared. I think what must be happening here is that the
compiler is confused by the returns-twice nature of getcontext: if
there were a call to setcontext, local variables could indeed have
lost their values on the second return from getcontext. This patch
duly uses the DIAG_* macros to disable the warning here.
Tested for nios2 and tilepro (compilation only; after this patch all
the tests compile, though there are other failures) and x86_64 (full
testsuite run).
* stdlib/bug-getcontext.c: Include <libc-internal.h>.
(do_test): Disable -Wmaybe-uninitialized around uses of
except_mask.
The strtod function should raise the "inexact" exception when its
result is inexact, but fails to do so except in the case of underflow
or overflow. This patch fixes it to do so for all inexact results.
tst-strtod-round is extended to test for this exception; the generator
is fixed to properly mark inexact results as such in the case where
the inexactness is from the mpfr_subnormalize step.
Tested for x86_64, x86 and powerpc.
[BZ #19380]
* stdlib/strtod_l.c (round_and_return): Force "inexact" exception
for inexact results.
* stdlib/gen-tst-strtod-round.c (string_to_fp): Return indication
of inexact result where mpfr_subnormalize is the only inexact
step.
* stdlib/tst-strtod-round-data.h: Regenerated.
* stdlib/tst-strtod-round-skeleton.c [!FE_INEXACT] (FE_INEXACT):
Define to 0.
(GEN_ONE_TEST): Test inexact exceptions raised are as expected.
ISO/IEC TS 18661-1 adds several functions in the strfrom family to stdlib.
This patch adds strfromd, strfromf, and strfroml. This is being done in
preparation for the new floating-point type, float128. The added functions
convert a floating-point value into a string, with configurable format.
TS 18661-1 defines macros for the width of integer types, intended for
use with the fromfp functions to convert from floating-point types to
integer types of any width, in any rounding mode and with control over
whether "inexact" is raised. Such macros are, of course, more
generally useful than just with those functions.
Those macros are added to <limits.h> and <stdint.h>. Having
previously added the <limits.h> macros, this patch adds the <stdint.h>
ones. I've also added these macros to GCC's headers for GCC 7, but
for glibc systems, the definitions in GCC's <stdint.h> will only be
used with -ffreestanding.
Tested for x86_64 and x86.
* sysdeps/generic/stdint.h: Define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
<bits/libc-header-start.h> instead of including <features.h>.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT8_WIDTH): New macro.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT8_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT16_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT16_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT32_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT32_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT64_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT64_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_LEAST8_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_LEAST8_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_LEAST16_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_LEAST16_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_LEAST32_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_LEAST32_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_LEAST64_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_LEAST64_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_FAST8_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_FAST8_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_FAST16_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_FAST16_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_FAST32_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_FAST32_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_FAST64_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_FAST64_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (INTPTR_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINTPTR_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (INTMAX_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINTMAX_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (PTRDIFF_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (SIG_ATOMIC_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (SIZE_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (WCHAR_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (WINT_WIDTH): Likewise.
* manual/arith.texi (Integers): Document these macros for types
specified by width properties.
* manual/lang.texi (Width of Type): Document these macros for
other standard typedefs.
* stdlib/tst-width-stdint.c: New file.
* stdlib/Makefile (tests): Add tst-width-stdint.
TS 18661-1 defines macros for the width of integer types, intended for
use with the fromfp functions to convert from floating-point types to
integer types of any width, in any rounding mode and with control over
whether "inexact" is raised. Such macros are, of course, more
generally useful than just with those functions.
Those macros are added to <limits.h> and <stdint.h>. This patch adds
the <limits.h> macros to glibc's header, with the <stdint.h> ones
intended to be added in a separate patch (which would add to the NEWS
entry created by this patch). I've also added these macros to GCC's
headers for GCC 7, but definitions in glibc's <limits.h> are still
useful for older GCC, for non-GNU compilers and for when it's
_GNU_SOURCE rather than __STDC_WANT_IEC_60559_BFP_EXT__ that implies
the macros should be defined since the GCC header only considers
__STDC_WANT_IEC_60559_BFP_EXT__ (and for glibc systems, the
definitions in GCC's <stdint.h> will only be used with
-ffreestanding).
Tested for x86_64 and x86.
* include/limits.h: Define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
<bits/libc-header-start.h> instead of including <features.h>.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (CHAR_WIDTH): New macro.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (SCHAR_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (UCHAR_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (SHRT_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (USHRT_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (LONG_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (ULONG_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (LLONG_WIDTH): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (ULLONG_WIDTH): Likewise.
* manual/lang.texi (Width of Type): Document these macros.
* stdlib/tst-width.c: New file.
* stdlib/Makefile (tests): Add tst-width.
This extends tst-strtod-round with a few trivial changes
to also test the wide character variants of strto* using
similar macros to other shared tests.
This commit puts all libio vtables in a dedicated, read-only ELF
section, so that they are consecutive in memory. Before any indirect
jump, the vtable pointer is checked against the section boundaries,
and the process is terminated if the vtable pointer does not fall into
the special ELF section.
To enable backwards compatibility, a special flag variable
(_IO_accept_foreign_vtables), protected by the pointer guard, avoids
process termination if libio stream object constructor functions have
been called earlier. Such constructor functions are called by the GCC
2.95 libstdc++ library, and this mechanism ensures compatibility with
old binaries. Existing callers inside glibc of these functions are
adjusted to call the original functions, not the wrappers which enable
vtable compatiblity.
The compatibility mechanism is used to enable passing FILE * objects
across a static dlopen boundary, too.
If C++ headers such as <cstdlib> or <thread> are used, GCC 6
will include /usr/include/stdlib.h (instead of stdlib/stdlib.h
in the glibc source directory), and this turns up as a make
dependency. An implicit rule will kick in and make will try to
install stdlib/stdlib.h as /usr/include/stdlib.h because the
target is out of date.
This commit switches to <stdlib.h> and <pthread.h> instead of
<cstdlib> and <thread>.
In C++11 18.5.12 says "Objects shall not be destroyed as a
result of calling quick_exit." In C11 quick_exit is silent
about thread object destruction. Therefore to make glibc
C++ compliant we do not call any thread local destructors.
A new regression test verifies the fix.
I will note that C++11 18.5.3 makes it clear that C++
defines additional requirements for _Exit() to prevent it
from executing destructors.
Given that the point of _Exit() is to terminate the process
immediately it makes sense the C and C++ should line up
and avoid calling destructors.
No failures. New regtest passes.
This file is partially generated. To make updates a little
simpler, I have moved the generated code into a partially
contained header to simplify regeneration.
gen-tst-strtod-round.c now takes two, mandatory arguments.
These arguments specify the input test data and the output
destination, respectively.
stdlib.h declares grantpt, ptsname, unlockpt for __USE_XOPEN. This
patch corrects the condition to __USE_XOPEN_EXTENDED (these functions
are new in XPG4).
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
[BZ #20094]
* stdlib/stdlib.h (grantpt): Declare if [__USE_XOPEN_EXTENDED],
not [__USE_XOPEN].
(unlockpt): Likewise.
(ptsname): Likewise.
* conform/Makefile (test-xfail-XPG3/stdlib.h/conform): Remove
variable.
stdlib.h declares rand_r if __USE_POSIX; i.e., POSIX.1:1990. But
rand_r was added along with threads, so the condition should be
__USE_POSIX199506. This patch corrects the condition.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
[BZ #20074]
* stdlib/stdlib.h (rand_r): Declare if [__USE_POSIX199506], not if
[__USE_POSIX].
* conform/Makefile (test-xfail-XPG4/stdlib.h/conform): Remove
variable.
UNIX98 and XPG4 have ttyslot in <stdlib.h>. glibc, however, has it in
<unistd.h>, for __USE_MISC || (__USE_XOPEN_EXTENDED && !__USE_UNIX98),
but no supported standard has it in <unistd.h>.
This patch adds a properly conditioned declaration to <stdlib.h> (only
enabled for the relevant standards, not for __USE_MISC or __USE_GNU).
The <unistd.h> declaration is restricted to __USE_MISC. Some relevant
XFAILs are removed.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
[BZ #20051]
* posix/unistd.h [__USE_XOPEN_EXTENDED && !__USE_UNIX98]
(ttyslot): Do not declare.
* stdlib/stdlib.h [__USE_XOPEN_EXTENDED && !__USE_XOPEN2K]
(ttyslot): New prototype.
* conform/Makefile (test-xfail-XPG4/unistd.h/conform): Remove
variable.
(test-xfail-UNIX98/stdlib.h/conform): Likewise.
The overloading approach in the W* macros was incompatible with
integer expressions of a type different from int. Applications
using union wait and these macros will have to migrate to the
POSIX-specified int status type.
The nan, nanf and nanl functions handle payload strings by doing e.g.:
if (tagp[0] != '\0')
{
char buf[6 + strlen (tagp)];
sprintf (buf, "NAN(%s)", tagp);
return strtod (buf, NULL);
}
This is an unbounded stack allocation based on the length of the
argument. Furthermore, if the argument starts with an n-char-sequence
followed by ')', that n-char-sequence is wrongly treated as
significant for determining the payload of the resulting NaN, when ISO
C says the call should be equivalent to strtod ("NAN", NULL), without
being affected by that initial n-char-sequence. This patch fixes both
those problems by using the __strtod_nan etc. functions recently
factored out of strtod etc. for that purpose, with those functions
being exported from libc at version GLIBC_PRIVATE.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #16961]
[BZ #16962]
* math/s_nan.c (__nan): Use __strtod_nan instead of constructing a
string on the stack for strtod.
* math/s_nanf.c (__nanf): Use __strtof_nan instead of constructing
a string on the stack for strtof.
* math/s_nanl.c (__nanl): Use __strtold_nan instead of
constructing a string on the stack for strtold.
* stdlib/Versions (libc): Add __strtof_nan, __strtod_nan and
__strtold_nan to GLIBC_PRIVATE.
* math/test-nan-overflow.c: New file.
* math/test-nan-payload.c: Likewise.
* math/Makefile (tests): Add test-nan-overflow and
test-nan-payload.
The nan* functions handle their string argument by constructing a
NAN(...) string on the stack as a VLA and passing it to strtod
functions.
This approach has problems discussed in bug 16961 and bug 16962: the
stack usage is unbounded, and it gives incorrect results in certain
cases where the argument is not a valid n-char-sequence.
The natural fix for both issues is to refactor the NaN payload parsing
out of strtod into a separate function that the nan* functions can
call directly, so that no temporary string needs constructing on the
stack at all. This patch does that refactoring in preparation for
fixing those bugs (but without actually using the new functions from
nan* - which will also require exporting them from libc at version
GLIBC_PRIVATE). This patch is not intended to change any user-visible
behavior, so no tests are added (fixes for the above bugs will of
course add tests for them).
This patch builds on my recent fixes for strtol and strtod issues in
Turkish locales. Given those fixes, the parsing of NaN payloads is
locale-independent; thus, the new functions do not need to take a
locale_t argument.
Tested for x86_64, x86, mips64 and powerpc.
* stdlib/strtod_nan.c: New file.
* stdlib/strtod_nan_double.h: Likewise.
* stdlib/strtod_nan_float.h: Likewise.
* stdlib/strtod_nan_main.c: Likewise.
* stdlib/strtod_nan_narrow.h: Likewise.
* stdlib/strtod_nan_wide.h: Likewise.
* stdlib/strtof_nan.c: Likewise.
* stdlib/strtold_nan.c: Likewise.
* sysdeps/ieee754/ldbl-128/strtod_nan_ldouble.h: Likewise.
* sysdeps/ieee754/ldbl-128ibm/strtod_nan_ldouble.h: Likewise.
* sysdeps/ieee754/ldbl-96/strtod_nan_ldouble.h: Likewise.
* wcsmbs/wcstod_nan.c: Likewise.
* wcsmbs/wcstof_nan.c: Likewise.
* wcsmbs/wcstold_nan.c: Likewise.
* stdlib/Makefile (routines): Add strtof_nan, strtod_nan and
strtold_nan.
* wcsmbs/Makefile (routines): Add wcstod_nan, wcstold_nan and
wcstof_nan.
* include/stdlib.h (__strtof_nan): Declare and use
libc_hidden_proto.
(__strtod_nan): Likewise.
(__strtold_nan): Likewise.
(__wcstof_nan): Likewise.
(__wcstod_nan): Likewise.
(__wcstold_nan): Likewise.
* include/wchar.h (____wcstoull_l_internal): Declare.
* stdlib/strtod_l.c: Do not include <ieee754.h>.
(____strtoull_l_internal): Remove declaration.
(STRTOF_NAN): Define macro.
(SET_MANTISSA): Remove macro.
(STRTOULL): Likewise.
(____STRTOF_INTERNAL): Use STRTOF_NAN to parse NaN payload.
* stdlib/strtof_l.c (____strtoull_l_internal): Remove declaration.
(STRTOF_NAN): Define macro.
(SET_MANTISSA): Remove macro.
* sysdeps/ieee754/ldbl-128/strtold_l.c (STRTOF_NAN): Define macro.
(SET_MANTISSA): Remove macro.
* sysdeps/ieee754/ldbl-128ibm/strtold_l.c (STRTOF_NAN): Define
macro.
(SET_MANTISSA): Remove macro.
* sysdeps/ieee754/ldbl-64-128/strtold_l.c (STRTOF_NAN): Define
macro.
(SET_MANTISSA): Remove macro.
* sysdeps/ieee754/ldbl-96/strtold_l.c (STRTOF_NAN): Define macro.
(SET_MANTISSA): Remove macro.
* wcsmbs/wcstod_l.c (____wcstoull_l_internal): Remove declaration.
* wcsmbs/wcstof_l.c (____wcstoull_l_internal): Likewise.
* wcsmbs/wcstold_l.c (____wcstoull_l_internal): Likewise.
The implementations of strtod and related functions use
locale-specific conversions to lower case when parsing the contents of
a string NAN(n-char-sequence_opt). This has the consequence that
NAN(I) is not treated as being of that form (only the initial NAN part
is accepted). The syntax of n-char-sequence directly maps to the
ASCII letters, digits and underscore as in identifiers, so it is
unambiguous that all ASCII letters must be accepted in all locales.
This patch, relative to a tree with
<https://sourceware.org/ml/libc-alpha/2015-11/msg00258.html> (pending
review) applied and depending on that patch, fixes this problem by
checking directly for ASCII letters. This will have the side effect
of no longer accepting 'İ' (dotted 'I') inside NAN() in Turkish
locales, which seems appropriate (that letter wouldn't have been
interpreted as having any meaning in the NaN payload anyway, as not
acceptable to strtoull).
Tested for x86_64 and x86.
[BZ #19266]
* stdlib/strtod_l.c (____STRTOF_INTERNAL): Check directly for
upper case and lower case letters inside NAN(), not using TOLOWER.
* stdlib/tst-strtod-nan-locale-main.c: New file.
* stdlib/tst-strtod-nan-locale.c: Likewise.
* stdlib/Makefile (tests): Add tst-strtod-nan-locale.
[$(run-built-tests) = yes] ($(objpfx)tst-strtod-nan-locale.out):
Depend on $(gen-locales).
($(objpfx)tst-strtod-nan-locale): Depend on $(libm).
* wcsmbs/tst-wcstod-nan-locale.c: New file.
* wcsmbs/Makefile (tests): Add tst-wcstod-nan-locale.
[$(run-built-tests) = yes] ($(objpfx)tst-wcstod-nan-locale.out):
Depend on $(gen-locales).
($(objpfx)tst-wcstod-nan-locale): Depend on $(libm).
The implementations of strtol and related functions use
locale-specific conversions to upper case before determining whether a
character is a valid letter in the argument. This means that in
Turkish locales such as tr_TR.UTF-8 and tr_TR.ISO-8859-9, "i" is
interpreted as not being a valid number, when if the base passed to
strtol is 19 or more it should be interpreted as the number 18.
ISO C explicitly says "The letters from a (or A) through z (or Z) are
ascribed the values 10 through 35", so clearly intends the standard
ASCII letters (otherwise you wouldn't generally have exactly 26
letters to ascribe such values) (whereas white-space must be
identified according to the locale). In particular, 'i' and 'I' must
be understood to be in that sequence.
This patch makes the code do the case conversions and classification
in the C locale; the user's locale remains used for whitespace testing
(explicitly correct according to ISO C). Note that the way the code
worked, the only non-ASCII letter that would previously have been
accepted would have been the Turkish 'ı' (dotless 'i'), because the
uppercase version of that in Turkish locales is 'I'. This patch means
that will no longer be accepted, which seems appropriate.
Tested for x86_64 and x86.
[BZ #19242]
* stdlib/strtol_l.c (ISALPHA): Use _nl_C_locobj_ptr for locale.
(TOUPPER): Likewise.
* stdlib/tst-strtol-locale-main.c: New file.
* stdlib/tst-strtol-locale.c: Likewise.
* stdlib/Makefile (tests): Add tst-strtol-locale.
[$(run-built-tests) = yes] (LOCALES): Add tr_TR.ISO-8859-9.
[$(run-built-tests) = yes] ($(objpfx)tst-strtol-locale.out):
Depend on $(gen-locales).
* wcsmbs/tst-wcstol-locale.c: New file.
* wcsmbs/Makefile (tests): Add tst-wcstol-locale.
[$(run-built-tests) = yes] (LOCALES): Add tr_TR.UTF-8 and
tr_TR.ISO-8859-9.
[$(run-built-tests) = yes] ($(objpfx)tst-wcstol-locale.out):
Depend on $(gen-locales).
One common case of __GNUC_PREREQ (4, 7) conditionals is use of
diagnostic control pragmas for -Wmaybe-uninitialized, an option
introduced in GCC 4.7 where older GCC needed -Wuninitialized to be
controlled instead if the warning appeared with older GCC. This patch
removes such conditionals.
(There remain several older uses of -Wno-uninitialized in makefiles
that still need to be converted to diagnostic control pragmas if the
issue is still present with current sources and supported GCC
versions, and it's likely that in most cases those pragmas also will
end up controlling -Wmaybe-uninitialized.)
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch, except for libresolv
since res_send.c contains assertions whose line numbers are changed by
the patch).
* resolv/res_send.c (send_vc) [__GNUC_PREREQ (4, 7)]: Make code
unconditional.
* soft-fp/fmadf4.c [__GNUC_PREREQ (4, 7)]: Likewise.
[!__GNUC_PREREQ (4, 7)]: Remove conditional code.
* soft-fp/fmasf4.c [__GNUC_PREREQ (4, 7)]: Make code
unconditional.
[!__GNUC_PREREQ (4, 7)]: Remove conditional code.
* soft-fp/fmatf4.c [__GNUC_PREREQ (4, 7)]: Make code
unconditional.
[!__GNUC_PREREQ (4, 7)]: Remove conditional code.
* stdlib/setenv.c
[((__GNUC__ << 16) + __GNUC_MINOR__) >= ((4 << 16) + 7)]: Make
code unconditional.
[!(((__GNUC__ << 16) + __GNUC_MINOR__) >= ((4 << 16) + 7))]:
Remove conditional code.
* sysdeps/ieee754/dbl-64/e_lgamma_r.c
(__ieee754_lgamma_r) [__GNUC_PREREQ (4, 7)]: Make code
unconditional.
(__ieee754_lgamma_r) [!__GNUC_PREREQ (4, 7)]: Remove conditional
code.
* sysdeps/ieee754/flt-32/e_lgammaf_r.c
(__ieee754_lgammaf_r) [__GNUC_PREREQ (4, 7)]: Make code
unconditional.
(__ieee754_lgammaf_r) [!__GNUC_PREREQ (4, 7)]: Remove conditional
code.
* sysdeps/ieee754/ldbl-128/k_tanl.c
(__kernel_tanl) [__GNUC_PREREQ (4, 7)]: Make code unconditional.
(__kernel_tanl) [!__GNUC_PREREQ (4, 7)]: Remove conditional code.
* sysdeps/ieee754/ldbl-128ibm/k_tanl.c
(__kernel_tanl) [__GNUC_PREREQ (4, 7)]: Make code unconditional.
(__kernel_tanl) [!__GNUC_PREREQ (4, 7)]: Remove conditional code.
* sysdeps/ieee754/ldbl-96/e_lgammal_r.c
(__ieee754_lgammal_r) [__GNUC_PREREQ (4, 7)]: Make code
unconditional.
(__ieee754_lgammal_r) [!__GNUC_PREREQ (4, 7)]: Remove conditional
code.
* sysdeps/ieee754/ldbl-96/k_tanl.c
(__kernel_tanl) [__GNUC_PREREQ (4, 7)]: Make code unconditional.
(__kernel_tanl) [!__GNUC_PREREQ (4, 7)]: Remove conditional code.
This mostly automatically-generated patch converts 113 function
definitions in glibc from old-style K&R to prototype-style. Following
my other recent such patches, this one deals with the case of function
definitions in files that either contain assertions or where grep
suggested they might contain assertions - and thus where it isn't
possible to use a simple object code comparison as a sanity check on
the correctness of the patch, because line numbers are changed.
A few such automatically-generated changes needed to be supplemented
by manual changes for the result to compile. openat64 had a prototype
declaration with "..." but an old-style definition in
sysdeps/unix/sysv/linux/dl-openat64.c, and "..." needed adding to the
generated prototype in the definition (I've filed
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=68024> for diagnosing
such cases in GCC; the old state was undefined behavior not requiring
a diagnostic, but one seems a good idea). In addition, as Florian has
noted regparm attribute mismatches between declaration and definition
are only diagnosed for prototype definitions, and five functions
needed internal_function added to their definitions (in the case of
__pthread_mutex_cond_lock, via the macro definition of
__pthread_mutex_lock) to compile on i386.
After this patch is in, remaining old-style definitions are probably
most readily fixed manually before we can turn on
-Wold-style-definition for all builds.
Tested for x86_64 and x86 (testsuite).
* crypt/md5-crypt.c (__md5_crypt_r): Convert to prototype-style
function definition.
* crypt/sha256-crypt.c (__sha256_crypt_r): Likewise.
* crypt/sha512-crypt.c (__sha512_crypt_r): Likewise.
* debug/backtracesyms.c (__backtrace_symbols): Likewise.
* elf/dl-minimal.c (_itoa): Likewise.
* hurd/hurdmalloc.c (malloc): Likewise.
(free): Likewise.
(realloc): Likewise.
* inet/inet6_option.c (inet6_option_space): Likewise.
(inet6_option_init): Likewise.
(inet6_option_append): Likewise.
(inet6_option_alloc): Likewise.
(inet6_option_next): Likewise.
(inet6_option_find): Likewise.
* io/ftw.c (FTW_NAME): Likewise.
(NFTW_NAME): Likewise.
(NFTW_NEW_NAME): Likewise.
(NFTW_OLD_NAME): Likewise.
* libio/iofwide.c (_IO_fwide): Likewise.
* libio/strops.c (_IO_str_init_static_internal): Likewise.
(_IO_str_init_static): Likewise.
(_IO_str_init_readonly): Likewise.
(_IO_str_overflow): Likewise.
(_IO_str_underflow): Likewise.
(_IO_str_count): Likewise.
(_IO_str_seekoff): Likewise.
(_IO_str_pbackfail): Likewise.
(_IO_str_finish): Likewise.
* libio/wstrops.c (_IO_wstr_init_static): Likewise.
(_IO_wstr_overflow): Likewise.
(_IO_wstr_underflow): Likewise.
(_IO_wstr_count): Likewise.
(_IO_wstr_seekoff): Likewise.
(_IO_wstr_pbackfail): Likewise.
(_IO_wstr_finish): Likewise.
* locale/programs/localedef.c (normalize_codeset): Likewise.
* locale/programs/locarchive.c (add_locale_to_archive): Likewise.
(add_locales_to_archive): Likewise.
(delete_locales_from_archive): Likewise.
* malloc/malloc.c (__libc_mallinfo): Likewise.
* math/gen-auto-libm-tests.c (init_fp_formats): Likewise.
* misc/tsearch.c (__tfind): Likewise.
* nptl/pthread_attr_destroy.c (__pthread_attr_destroy): Likewise.
* nptl/pthread_attr_getdetachstate.c
(__pthread_attr_getdetachstate): Likewise.
* nptl/pthread_attr_getguardsize.c (pthread_attr_getguardsize):
Likewise.
* nptl/pthread_attr_getinheritsched.c
(__pthread_attr_getinheritsched): Likewise.
* nptl/pthread_attr_getschedparam.c
(__pthread_attr_getschedparam): Likewise.
* nptl/pthread_attr_getschedpolicy.c
(__pthread_attr_getschedpolicy): Likewise.
* nptl/pthread_attr_getscope.c (__pthread_attr_getscope):
Likewise.
* nptl/pthread_attr_getstack.c (__pthread_attr_getstack):
Likewise.
* nptl/pthread_attr_getstackaddr.c (__pthread_attr_getstackaddr):
Likewise.
* nptl/pthread_attr_getstacksize.c (__pthread_attr_getstacksize):
Likewise.
* nptl/pthread_attr_init.c (__pthread_attr_init_2_1): Likewise.
(__pthread_attr_init_2_0): Likewise.
* nptl/pthread_attr_setdetachstate.c
(__pthread_attr_setdetachstate): Likewise.
* nptl/pthread_attr_setguardsize.c (pthread_attr_setguardsize):
Likewise.
* nptl/pthread_attr_setinheritsched.c
(__pthread_attr_setinheritsched): Likewise.
* nptl/pthread_attr_setschedparam.c
(__pthread_attr_setschedparam): Likewise.
* nptl/pthread_attr_setschedpolicy.c
(__pthread_attr_setschedpolicy): Likewise.
* nptl/pthread_attr_setscope.c (__pthread_attr_setscope):
Likewise.
* nptl/pthread_attr_setstack.c (__pthread_attr_setstack):
Likewise.
* nptl/pthread_attr_setstackaddr.c (__pthread_attr_setstackaddr):
Likewise.
* nptl/pthread_attr_setstacksize.c (__pthread_attr_setstacksize):
Likewise.
* nptl/pthread_condattr_setclock.c (pthread_condattr_setclock):
Likewise.
* nptl/pthread_create.c (__find_in_stack_list): Likewise.
* nptl/pthread_getattr_np.c (pthread_getattr_np): Likewise.
* nptl/pthread_mutex_cond_lock.c (__pthread_mutex_lock): Define to
use internal_function.
* nptl/pthread_mutex_init.c (__pthread_mutex_init): Convert to
prototype-style function definition.
* nptl/pthread_mutex_lock.c (__pthread_mutex_lock): Likewise.
(__pthread_mutex_cond_lock_adjust): Likewise. Use
internal_function.
* nptl/pthread_mutex_timedlock.c (pthread_mutex_timedlock):
Convert to prototype-style function definition.
* nptl/pthread_mutex_trylock.c (__pthread_mutex_trylock):
Likewise.
* nptl/pthread_mutex_unlock.c (__pthread_mutex_unlock_usercnt):
Likewise.
(__pthread_mutex_unlock): Likewise.
* nptl_db/td_ta_clear_event.c (td_ta_clear_event): Likewise.
* nptl_db/td_ta_set_event.c (td_ta_set_event): Likewise.
* nptl_db/td_thr_clear_event.c (td_thr_clear_event): Likewise.
* nptl_db/td_thr_event_enable.c (td_thr_event_enable): Likewise.
* nptl_db/td_thr_set_event.c (td_thr_set_event): Likewise.
* nss/makedb.c (process_input): Likewise.
* posix/fnmatch.c (__strchrnul): Likewise.
(__wcschrnul): Likewise.
(fnmatch): Likewise.
* posix/fnmatch_loop.c (FCT): Likewise.
* posix/glob.c (globfree): Likewise.
(__glob_pattern_type): Likewise.
(__glob_pattern_p): Likewise.
* posix/regcomp.c (re_compile_pattern): Likewise.
(re_set_syntax): Likewise.
(re_compile_fastmap): Likewise.
(regcomp): Likewise.
(regerror): Likewise.
(regfree): Likewise.
* posix/regexec.c (regexec): Likewise.
(re_match): Likewise.
(re_search): Likewise.
(re_match_2): Likewise.
(re_search_2): Likewise.
(re_search_stub): Likewise. Use internal_function
(re_copy_regs): Likewise.
(re_set_registers): Convert to prototype-style function
definition.
(prune_impossible_nodes): Likewise. Use internal_function.
* resolv/inet_net_pton.c (inet_net_pton): Convert to
prototype-style function definition.
(inet_net_pton_ipv4): Likewise.
* stdlib/strtod_l.c (____STRTOF_INTERNAL): Likewise.
* sysdeps/pthread/aio_cancel.c (aio_cancel): Likewise.
* sysdeps/pthread/aio_suspend.c (aio_suspend): Likewise.
* sysdeps/pthread/timer_delete.c (timer_delete): Likewise.
* sysdeps/unix/sysv/linux/dl-openat64.c (openat64): Likewise.
Make variadic.
* time/strptime_l.c (localtime_r): Convert to prototype-style
function definition.
* wcsmbs/mbsnrtowcs.c (__mbsnrtowcs): Likewise.
* wcsmbs/mbsrtowcs_l.c (__mbsrtowcs_l): Likewise.
* wcsmbs/wcsnrtombs.c (__wcsnrtombs): Likewise.
* wcsmbs/wcsrtombs.c (__wcsrtombs): Likewise.
This automatically-generated patch converts 29 function definitions in
glibc (including one in an example in the manual) from old-style K&R
to prototype-style. Following my other recent such patches, this one
deals with the case of function definitions where one K&R parameter
declaration declares multiple parameters, as in:
void
foo (a, b)
int a, *b;
{
}
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* crypt/crypt.c (_ufc_doit_r): Convert to prototype-style function
definition.
(_ufc_doit_r): Likewise.
* crypt/crypt_util.c (_ufc_copymem): Likewise.
(_ufc_output_conversion_r): Likewise.
* inet/inet_mkadr.c (__inet_makeaddr): Likewise.
* inet/rcmd.c (rcmd_af): Likewise.
(rcmd): Likewise.
(ruserok_af): Likewise.
(ruserok): Likewise.
(ruserok2_sa): Likewise.
(ruserok_sa): Likewise.
(iruserok_af): Likewise.
(iruserok): Likewise.
(__ivaliduser): Likewise.
(__validuser2_sa): Likewise.
* inet/rexec.c (rexec_af): Likewise.
(rexec): Likewise.
* inet/ruserpass.c (ruserpass): Likewise.
* locale/programs/xmalloc.c (xcalloc): Likewise.
* manual/examples/timeval_subtract.c (timeval_subtract): Likewise.
* math/w_drem.c (__drem): Likewise.
* math/w_dremf.c (__dremf): Likewise.
* math/w_dreml.c (__dreml): Likewise.
* misc/daemon.c (daemon): Likewise.
* resolv/res_debug.c (p_fqnname): Likewise.
* stdlib/div.c (div): Likewise.
* string/memcmp.c (memcmp_bytes): Likewise.
* sunrpc/pmap_rmt.c (pmap_rmtcall): Likewise.
* sunrpc/svc_udp.c (svcudp_bufcreate): Likewise.
Where glibc code needs to avoid excess range and precision in
floating-point arithmetic, code variously uses either asms or volatile
to force the results of that arithmetic to memory; mostly this is
conditional on FLT_EVAL_METHOD, but in the case of lrint / llrint
functions some use of volatile is unconditional (and is present
unnecessarily in versions for long double). This patch make such code
use the recently-added math_narrow_eval macro consistently, removing
the unnecessary uses of volatile in long double lrint / llrint
implementations completely.
Tested for x86_64, x86, mips64 and powerpc.
* math/s_nexttowardf.c (__nexttowardf): Use math_narrow_eval.
* stdlib/strtod_l.c: Include <math_private.h>.
(overflow_value): Use math_narrow_eval.
(underflow_value): Likewise.
* sysdeps/i386/fpu/s_nexttoward.c (__nexttoward): Likewise.
* sysdeps/i386/fpu/s_nexttowardf.c (__nexttowardf): Likewise.
* sysdeps/ieee754/dbl-64/e_gamma_r.c (gamma_positive): Likewise.
(__ieee754_gamma_r): Likewise.
* sysdeps/ieee754/dbl-64/gamma_productf.c (__gamma_productf):
Likewise.
* sysdeps/ieee754/dbl-64/k_rem_pio2.c (__kernel_rem_pio2):
Likewise.
* sysdeps/ieee754/dbl-64/lgamma_neg.c (__lgamma_neg): Likewise.
* sysdeps/ieee754/dbl-64/s_erf.c (__erfc): Likewise.
* sysdeps/ieee754/dbl-64/s_llrint.c (__llrint): Likewise.
* sysdeps/ieee754/dbl-64/s_lrint.c (__lrint): Likewise.
* sysdeps/ieee754/flt-32/e_gammaf_r.c (gammaf_positive): Likewise.
(__ieee754_gammaf_r): Likewise.
* sysdeps/ieee754/flt-32/k_rem_pio2f.c (__kernel_rem_pio2f):
Likewise.
* sysdeps/ieee754/flt-32/lgamma_negf.c (__lgamma_negf): Likewise.
* sysdeps/ieee754/flt-32/s_erff.c (__erfcf): Likewise.
* sysdeps/ieee754/flt-32/s_llrintf.c (__llrintf): Likewise.
* sysdeps/ieee754/flt-32/s_lrintf.c (__lrintf): Likewise.
* sysdeps/ieee754/ldbl-128/s_llrintl.c (__llrintl): Do not use
volatile.
* sysdeps/ieee754/ldbl-128/s_lrintl.c (__lrintl): Likewise.
* sysdeps/ieee754/ldbl-128/s_nexttoward.c (__nexttoward): Use
math_narrow_eval.
* sysdeps/ieee754/ldbl-128ibm/s_nexttoward.c (__nexttoward):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_nexttowardf.c (__nexttowardf):
Likewise.
* sysdeps/ieee754/ldbl-96/gamma_product.c (__gamma_product):
Likewise.
* sysdeps/ieee754/ldbl-96/s_llrintl.c (__llrintl): Do not use
volatile.
* sysdeps/ieee754/ldbl-96/s_lrintl.c (__lrintl): Likewise.
* sysdeps/ieee754/ldbl-96/s_nexttoward.c (__nexttoward): Use
math_narrow_eval.
* sysdeps/ieee754/ldbl-96/s_nexttowardf.c (__nexttowardf):
Likewise.
* sysdeps/ieee754/ldbl-opt/s_nexttowardfd.c (__nldbl_nexttowardf):
Likewise.
This file uses isspace but doesn't include ctype.h leading to:
isomac.c: In function 'get_null_defines':
isomac.c:305:30: warning: implicit declaration of function 'isspace' [-Wimplicit-function-declaration]
for (end = start + 1; !isspace (*end) && *end != '\0'; ++end)
These tests were skipped by the use-test-skeleton conversion done in
commit 29955b5d because they did not have an `int main (void)'
declaration. Instead their `main' functions were declared with arguments
(i.e. argc, argv) even though they didn't use them.
Remove these arguments and include the test skeleton in these tests.
When an TLS destructor is registered, we set the DF_1_NODELETE flag to
signal that the object should not be destroyed. We then clear the
DF_1_NODELETE flag when all destructors are called, which is wrong -
the flag could have been set by other means too.
This patch replaces this use of the flag by using l_tls_dtor_count
directly to determine whether it is safe to unload the object. This
change has the added advantage of eliminating the lock taking when
calling the destructors, which could result in a deadlock. The patch
also fixes the test case tst-tls-atexit - it was making an invalid
dlclose call, which would just return an error silently.
I have also added a detailed note on concurrency which also aims to
justify why I chose the semantics I chose for accesses to
l_tls_dtor_count. Thanks to Torvald for his help in getting me
started on this and (literally) teaching my how to approach the
problem.
Change verified on x86_64; the test suite does not show any
regressions due to the patch.
ChangeLog:
[BZ #18657]
* elf/dl-close.c (_dl_close_worker): Don't unload DSO if there
are pending TLS destructor calls.
* include/link.h (struct link_map): Add concurrency note for
L_TLS_DTOR_COUNT.
* stdlib/cxa_thread_atexit_impl.c (__cxa_thread_atexit_impl):
Don't touch the link map flag. Atomically increment
l_tls_dtor_count.
(__call_tls_dtors): Atomically decrement l_tls_dtor_count.
Avoid taking the load lock and don't touch the link map flag.
* stdlib/tst-tls-atexit-nodelete.c: New test case.
* stdlib/Makefile (tests): Use it.
* stdlib/tst-tls-atexit.c (do_test): dlopen
tst-tls-atexit-lib.so again before dlclose. Add conditionals
to allow tst-tls-atexit-nodelete test case to use it.
The tst-tls-atexit test case searches for its module in /proc/PID/maps
to verify that it is unloaded, which is a Linux-specific test. This
patch makes the test generic by looking for the library in the link
map list in the _r_debug structure.
Verified that the test continues to succeed on x86_64. There is a bug
in the test case where it calls dlclose once again, which is actually
incorrect but still manages to unload the DSO thanks to an existing
bug in __tls_call_dtors. This will be fixed in a later patch which
also fixes up the __cxa_thread_atexit_impl implementation. I have
added a FIXME comment to that call momentarily, which I will remove
when I fix the problem.
* stdlib/tst-tls-atexit-lib.c (do_foo): Rename to reg_dtor.
* stdlib/tst-tls-atexit.c: (is_loaded): New function.
(spawn_thread): New function.
(load): Rename to reg_dtor_and_close. Move dlopen to...
(do_test): ... here. Use IS_LOADED to test for its
availability.
The locks don't synchronize with anything - they were likely
introduced initially to synchronize with some main thread code, but
that is no longer evident.
On s390/s390x backtrace(buffer, size) returns the series of called functions until
"makecontext_ret" and additional entries (up to "size") with "makecontext_ret".
GDB-backtrace is also warning:
"Backtrace stopped: previous frame identical to this frame (corrupt stack?)"
To reproduce this scenario you have to setup a new context with makecontext()
and activate it with setcontext(). See e.g. cf() function in testcase stdlib/tst-makecontext.c.
Or see bug in libgo "Bug 66303 - runtime.Caller() returns infinitely deep stack frames
on s390x " (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=66303).
This patch omits the cfi_startproc/cfi_endproc directives in ENTRY/END macro of
__makecontext_ret. Thus no frame information is generated in .eh_frame and backtrace
stops after __makecontext_ret. There is also no .eh_frame info for _start or
thread_start functions.
ChangeLog:
[BZ #18508]
* stdlib/Makefile ($(objpfx)tst-makecontext3):
Depend on $(libdl).
* stdlib/tst-makecontext.c (cf): Test if _Unwind_Backtrace
is not called infinitely times.
(backtrace_helper): New function.
(trace_arg): New struct.
(st1): Enlarge stack size.
* sysdeps/unix/sysv/linux/s390/s390-32/__makecontext_ret.S:
(__makecontext_ret): Omit cfi_startproc and cfi_endproc.
* sysdeps/unix/sysv/linux/s390/s390-64/__makecontext_ret.S:
Likewise.
Use of fmtmsg (XSI POSIX) brings in addseverity (non-POSIX). This
patch fixes this by making addseverity into a weak alias for
__addseverity.
Tested for x86_64 and x86 (testsuite, and that disassembly of
installed shared libraries is unchanged by the patch).
[BZ #18539]
* stdlib/fmtmsg.c (addseverity): Rename to __addseverity and
define as weak alias of __addseverity.
* conform/Makefile (test-xfail-XPG4/fmtmsg.h/linknamespace):
Remove variable.
(test-xfail-UNIX98/fmtmsg.h/linknamespace): Likewise.
(test-xfail-XOPEN2K/fmtmsg.h/linknamespace): Likewise.
(test-xfail-XOPEN2K8/fmtmsg.h/linknamespace): Likewise.
On 2015-05-26 21:24, Siddhesh Poyarekar wrote:
> On Tue, May 26, 2015 at 05:13:07PM +0300, Marko Myllynen wrote:
>> this should be obvious, please commit if looks to be ok.
>>
>> 2015-05-26 Marko Myllynen <myllynen@redhat.com>
>>
>> * stdlib/monetary.h: Fix comment.
>
> Patch didn't apply to master, but I've fixed it up and pushed it.
sorry about that (a whitespace hickup) - but your patch changed the
wrong comment, so here's a new patch to fix the fix.
There appears to be a discrepancy among the implementations
of setcontext with regards to the function called once the last
linked-to context has finished executing via setcontext.
The POSIX standard says:
~~~
If the uc_link member of the ucontext_t structure pointed to by
the ucp argument is equal to 0, then this context is the main
context, and the thread will exit when this context returns.
~~~
It says "exit" not "exit immediately" nor "exit without running
functions registered with atexit or on_exit."
Therefore the AArch64, ARM, hppa and NIOS II implementations are
wrong and no test detects it.
It is questionable if this should even be fixed or just documented
that the above 4 targets are wrong. The functions are deprecated
and nobody should be using them, but at the same time it silly to
have cross-target differences that make it hard to port old
applications from say x86_64 to AArch64.
Therefore I will ix the 4 arches, and checkin a regression
test to prevent it from changing again.
https://sourceware.org/ml/libc-alpha/2015-03/msg00720.html
* stdlib/setenv.c (__add_to_environ):
Dump core quickly if setenv (..., NULL, ...) is called.
This time, do it the right way, and pacify GCC with a pragma.
Bug 18247 is an off-by-one error in strtof's determination of a
decimal exponent such that any value with that decimal exponent is at
most half the least subnormal and so the appropriate underflowing
value for the rounding mode can be determined with no
multiple-precision computations. (Whether the value is in fact safe
despite the off-by-one depends on the floating-point format in
question. It's wrong for float and for m68k ldbl-96 but not for other
supported formats.) This patch corrects the computation of the
exponent in question to be safe in general, adding a comment
explaining the new computation.
Tested for x86_64.
[BZ #18247]
* stdlib/strtod_l.c (____STRTOF_INTERNAL): Decrease minimum
decimal exponent by 1.
* stdlib/tst-strtod-round-data: Add more tests.
* stdlib/tst-strtod-round.c (tests): Regenerated.
glibc maintains a binary tree of environment strings it malloc()ed
itself. However, it's possible for it to malloc() a string, then find
that an identical string is already in the tree. In this case, the
memory is leaked and is not freed if the application later calls
__libc_freeres(). Fix this by freeing 'new_value' when it's unneeded.
Test case:
#include <stdlib.h>
#include <string.h>
int main()
{
char *p = calloc(100000, 1);
memset(p, 'A', 99999);
setenv("TESTVAR", p, 1);
setenv("TESTVAR", p, 1);
free(p);
}
Leak that was reported by valgrind:
100,008 bytes in 1 blocks are definitely lost in loss record 1 of 1
at 0x4C29F90: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0x4E6B3D4: __add_to_environ (setenv.c:176)
by 0x4C31B8F: setenv (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0x400642: main (in /mnt/tmpfs/a.out)
Due to tile missing a bunch of FP exception and rounding
support, the tests generate warnings. These changes fix the
warnings by just not compiling some unused functions, and
adding some attribute ((unused)) tags.
The current scheme to identify which module a translation unit is
built in depends on defining multiple macros IS_IN_* and also defining
NOT_IN_libc if we're building a non-libc module. In addition, there
is an IN_LIB macro that does effectively the same thing, but for
different modules (notably the systemtap probes). This macro scheme
unifies both ideas to use just one macro IN_MODULE and assign it a
value depending on the module it is being built into. If the module
is not defined, it defaults to MODULE_libc.
Patches that follow will replace uses of IS_IN_* variables with the
IS_IN() macro. libc-symbols.h has been converted already to give an
example of how such a transition will look.
Verified that there are no relevant binary changes. One source change
that will crop up repeatedly is that of nscd_stat, since it uses the
build timestamp as a constant in its logic.
* Makeconfig (in-module): Get value of libof set for the
translation unit.
(CPPFLAGS): Use $(in-module).
* Makerules: Don't suffix routine names for nonlib.
* include/libc-modules.h: New file.
* include/libc-symbols.h: Include libc-modules.h
(IS_IN): New macro to replace IS_IN_* macros.
* elf/Makefile: Set libof-* for each routine.
* elf/rtld-Rules: Likewise.
* extra-modules.mk: Likewise.
* iconv/Makefile: Likewise.
* iconvdata/Makefile: Likewise.
* locale/Makefile: Likewise.
* malloc/Makefile: Likewise.
* nss/Makefile: Likewise.
* sysdeps/gnu/Makefile: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile: Likewise.
* sysdeps/unix/sysv/linux/Makefile: Likewise.
* sysdeps/s390/s390-64/Makefile: Likewise.
* nscd/Makefile: Set libof-* for each routine. Set CFLAGS and
CPPFLAGS for nscd instead of nonlib.
This patch fixes those warnings by using a prototype definition for
__strtol.
Tested for x86_64 that stripped installed shared libraries are
unchanged by this patch.
* stdlib/strtol.c (__strtol): Use prototype definition.
For 32-bit platforms, strtoll and strtoull are strong symbols in libc,
but they are not in ISO C90, and are brought in by references to
__strtoll_internal / __strtoull_internal from scanf. (For 64-bit
platforms, they are properly weak.) This patch makes them weak for
32-bit (it has a side-effect of making other symbols weak that don't
need to be weak, such as strtol, but that's harmless).
Tested for x86 (testsuite, and that the disassembly of installed
shared libraries is unchanged by the patch). This fixes all 120
unXFAILed FAILs of the new linknamespace tests seen for x86 (in fact,
there are now seven XPASSes of those tests for x86
XPASS: conform/POSIX2008/fcntl.h/linknamespace
XPASS: conform/UNIX98/libgen.h/linknamespace
XPASS: conform/XOPEN2K/fcntl.h/linknamespace
XPASS: conform/XOPEN2K/libgen.h/linknamespace
XPASS: conform/XOPEN2K8/fcntl.h/linknamespace
XPASS: conform/XOPEN2K8/libgen.h/linknamespace
XPASS: conform/XPG4/libgen.h/linknamespace
so suggesting that the failures seen for those on x86_64 are in some
way architecture-specific or 64-bit-specific).
[BZ #17594]
* stdlib/strtol.c (SYM__): New macro.
(SYM__1): Likewise.
(__strtol): Likewise.
(strtol): Rename to __strtol and define as weak alias of
__strtol. Use libc_hidden_weak.
qsort_r is defined in the same file as qsort, but is not an ISO C
function, so should be a weak alias for __qsort_r. The uses in
getaddrinfo should also call __qsort_r, since getaddrinfo is a POSIX
function and qsort_r isn't. This patch implements this. Because nscd
uses the getaddrinfo sources outside libc, as do the tst-rfc3484
tests, a #define of __qsort_r to qsort_r is added there alongside the
similar defines for other libc-internal symbols used in getaddrinfo.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by the patch).
[BZ #17571]
* stdlib/msort.c (qsort_r): Rename to __qsort_r and define as weak
alias of __qsort_r.
(qsort): Call __qsort_r instead of qsort_r.
* include/stdlib.h (qsort_r): Do not call libc_hidden_proto.
(__qsort_r): Declare. Call libc_hidden_proto.
* sysdeps/posix/getaddrinfo.c (getaddrinfo): Call __qsort_r
instead of qsort_r.
* nscd/gai.c (__qsort_r): Define to qsort_r.
* posix/tst-rfc3484.c (__qsort_r): Likewise.
* posix/tst-rfc3484-2.c (__qsort_r): Likewise.
* posix/tst-rfc3484-3.c (__qsort_r): Likewise.
This patch removes use of the obsolete INTDEF/INTUSE mechanism for
__cxa_atexit, replacing it with libc_hidden_def/libc_hidden_proto.
Tested for x86_64 that installed stripped shared libraries are
unchanged by the patch.
[BZ #14132]
* stdlib/cxa_atexit.c (__cxa_atexit): Use libc_hidden_def instead
of INTDEF.
* include/stdlib.h (__cxa_atexit_internal): Remove declaration.
(__cxa_atexit): Use libc_hidden_proto.
[!NOT_IN_libc] (__cxa_atexit): Remove macro definition.
Building this test on ARM fails because the prototypes for the long
double variants of the math functions are unavailable.
Add an additional include guard to math.h that enables long double math
function declarations if _LIBC_TEST is defined and define _LIBC_TEST in
stdlib/tst-strtod-round.c.
ChangeLog:
2014-09-30 Will Newton <will.newton@linaro.org>
* math/math.h: Define long double math functions if
_LIBC_TEST is defined.
* stdlib/tst-strtod-round.c: Define _LIBC_TEST.
GCC 4.4, the minimum compiler version, supports this option. Unlike
other warnings, -Wimplicit-function-declaration warnings should be
independent of compiler versions, so this change should not cause
compiler-specific build failures.
This test case is very, especially on targets using soft-float or QEMU
(where soft-float is used internally), and appears to be the only such
outlier. Therefore rather than requiring to have TIMEOUTFACTOR set
large enough globally, bump up the local scaling factor instead.
* stdlib/tst-strtod-overflow.c (TIMEOUT): Bump up to 30.
This fixes an off-by-one argc interpretation error (argv[0] is included
in the count) in stdlib/tst-qsort2.c causing a segfault if the program
is called with one command-line argument only (argv[2] is NULL in that
case).
One wart in the original support for test wrappers for cross testing,
as noted in
<https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the
requirement for test wrappers to pass a poorly-defined set of
environment variables from the build system to the system running the
glibc under test. Although some variables are passed explicitly via
$(test-wrapper-env), including LD_* variables that simply can't be
passed implicitly because of the side effects they'd have on the build
system's dynamic linker, others are passed implicitly, including
variables such as GCONV_PATH and LOCPATH that could potentially affect
the build system's libc (so effectively relying on any such effects
not breaking the wrappers). In addition, the code in
cross-test-ssh.sh for preserving environment variables is fragile (it
depends on how bash formats a list of exported variables, and could
well break for multi-line variable definitions where the contents
contain things looking like other variable definitions).
This patch moves to explicitly passing environment variables via
$(test-wrapper-env). Makefile variables that previously used
$(test-wrapper) are split up into -before-env and -after-env parts
that can be passed separately to the various .sh files used in
testing, so those files can then insert environment settings between
the two parts.
The common default environment settings in make-test-out are made into
a separate makefile variable that can also be passed to scripts,
rather than many scripts duplicating those settings (for testing an
installed glibc, it is desirable to have the GCONV_PATH setting on
just one place, so just that one place needs to support it pointing to
an installed sysroot instead of the build tree). The default settings
are included in the variables such as $(test-program-prefix), so that
if tests do not need any non-default settings they can continue to use
single variables rather than the split-up variables.
Although this patch cleans up LC_ALL=C settings (that being part of
the common defaults), various LANG=C and LANGUAGE=C settings remain.
Those are generally unnecessary and I propose a subsequent cleanup to
remove them. LC_ALL takes precedence over LANG, and while LANGUAGE
takes precedence over LC_ALL, it only does so for settings other than
LC_ALL=C. So LC_ALL=C on its own is sufficient to ensure the C
locale, and anything that gets LC_ALL=C does not need the other
settings.
While preparing this patch I noticed some tests with .sh files that
appeared to do nothing beyond what the generic makefile support for
tests can do (localedata/tst-wctype.sh - the makefiles support -ENV
variables and .input files - and localedata/tst-mbswcs.sh - just runs
five tests that could be run individually from the makefile). So I
propose another subsequent cleanup to move those to using the generic
support instead of special .sh files.
Tested x86_64 (native) and powerpc32 (cross).
* Makeconfig (run-program-env): New variable.
(run-program-prefix-before-env): Likewise.
(run-program-prefix-after-env): Likewise.
(run-program-prefix): Define in terms of new variables.
(built-program-cmd-before-env): New variable.
(built-program-cmd-after-env): Likewise.
(built-program-cmd): Define in terms of new variables.
(test-program-prefix-before-env): New variable.
(test-program-prefix-after-env): Likewise.
(test-program-prefix): Define in terms of new variables.
(test-program-cmd-before-env): New variable.
(test-program-cmd-after-env): Likewise.
(test-program-cmd): Define in terms of new variables.
* Rules (make-test-out): Use $(run-program-env).
* scripts/cross-test-ssh.sh (env_blacklist): Remove variable.
(help): Do not mention environment variables. Mention
--timeoutfactor option.
(timeoutfactor): New variable.
(blacklist_exports): Remove function.
(exports): Remove variable.
(command): Do not include ${exports}.
* manual/install.texi (Configuring and compiling): Do not mention
test wrappers preserving environment variables. Mention that last
assignment to a variable must take precedence.
* INSTALL: Regenerated.
* benchtests/Makefile (run-bench): Use $(run-program-env).
* catgets/Makefile ($(objpfx)test1.cat): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)test2.cat): Do not specify environment variables
explicitly.
($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)sample.SJIS.cat): Do not specify environment variables
explicitly.
* catgets/test-gencat.sh: Use test_program_cmd_before_env,
run_program_env and test_program_cmd_after_env arguments.
* elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env).
* elf/tst-pathopt.sh: Use run_program_env argument.
* iconvdata/Makefile ($(objpfx)iconv-test.out): Use
$(test-wrapper-env) and $(run-program-env).
* iconvdata/run-iconv-test.sh: Use test_wrapper_env and
run_program_env arguments.
* iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly.
* intl/Makefile ($(objpfx)tst-gettext.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-gettext2.out): Likewise.
* intl/tst-gettext.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* intl/tst-gettext2.sh: Likewise.
* intl/tst-gettext4.sh: Do not set environment variables
explicitly.
* intl/tst-gettext6.sh: Likewise.
* intl/tst-translit.sh: Likewise.
* malloc/Makefile ($(objpfx)tst-mtrace.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* malloc/tst-mtrace.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* math/Makefile (run-regen-ulps): Use $(run-program-env).
* nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env).
* nptl/tst-tls6.sh: Use run_program_env argument. Set LANG=C
explicitly with each use of ${test_wrapper_env}.
* posix/Makefile ($(objpfx)wordexp-tst.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* posix/tst-getconf.sh: Do not set environment variables
explicitly.
* posix/wordexp-tst.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* stdio-common/tst-printf.sh: Do not set environment variables
explicitly.
* stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
Split $test calls into $test_pre and $test.
* timezone/Makefile (build-testdata): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
localedata/ChangeLog:
* Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)sort-test.out): Use $(test-program-prefix-before-env),
$(run-program-env) and $(test-program-prefix-after-env).
($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env),
$(run-program-env) and $(run-program-prefix-after-env).
($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env),
$(run-program-env), $(run-program-prefix-after-env),
$(test-program-prefix-before-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)tst-wctype.out): Likewise.
($(objpfx)tst-langinfo.out): Likewise.
($(objpfx)tst-langinfo-static.out): Likewise.
* gen-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* sort-test.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* tst-ctype.sh: Use tst_ctype_before_env, run_program_env and
tst_ctype_after_env arguments.
* tst-fmon.sh: Use run_program_prefix_before_env, run_program_env
and run_program_prefix_after_env arguments.
* tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env
and tst_langinfo_after_env arguments.
* tst-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* tst-mbswcs.sh: Do not set environment variables explicitly.
* tst-numeric.sh: Likewise.
* tst-rpmatch.sh: Likewise.
* tst-trans.sh: Use run_program_prefix_before_env,
run_program_env, run_program_prefix_after_env,
test_program_prefix_before_env and test_program_prefix_after_env
arguments.
* tst-wctype.sh: Use tst_wctype_before_env, run_program_env and
tst_wctype_after_env arguments.
Tests run using the default $(make-test-out) automatically get
GCONV_PATH and LC_ALL set, whether or not those environment variables
are actually needed for the individual test. However, they do not get
LOCPATH set, meaning that a large number of tests have -ENV settings
just to set LOCPATH.
This patch moves LOCPATH into the default environment used for all
tests, on the principle that like GCONV_PATH any settings needed to
use files associated with the newly built library, rather than any old
installed files, are appropriate to use by default.
A further motivation is that various tests using .sh files also set
some combination of LC_ALL, GCONV_PATH and LOCPATH. Preferably .sh
files should also use the default environment with any additions
required for the individual test. Now, it was suggested in
<https://sourceware.org/ml/libc-alpha/2014-05/msg00715.html> that
various Makefile variables used in testing should be derived by
composing the -before-env and -after-env variables used when explicit
environment settings are required. With such a change, it's also
natural for those variables to include the default settings (via some
intermediate makefile variable also used in make-test-out).
Because some .sh files only set variables that correspond to the
default settings, or a subset thereof, and this applies to more of the
.sh files once LOCPATH is in the default settings, doing so reduces
the size of a revised version of
<https://sourceware.org/ml/libc-alpha/2014-05/msg00596.html>: scripts
only needing the (expanded) default settings will not need to receive
the separate -before-env and -after-env variables, only the single
variable they do at present. So moving LOCPATH into the default
settings can reduce churn caused by subsequent patches.
Tested x86_64 and x86.
* Rules (make-test-out): Include
LOCPATH=$(common-objpfx)localedata in default environment.
* debug/Makefile (tst-chk1-ENV): Remove variable.
(tst-chk2-ENV): Likewise.
(tst-chk3-ENV): Likewise.
(tst-chk4-ENV): Likewise.
(tst-chk5-ENV): Likewise.
(tst-chk6-ENV): Likewise.
(tst-lfschk1-ENV): Likewise.
(tst-lfschk2-ENV): Likewise.
(tst-lfschk3-ENV): Likewise.
(tst-lfschk4-ENV): Likewise.
(tst-lfschk5-ENV): Likewise.
(tst-lfschk6-ENV): Likewise.
* iconvdata/Makefile (bug-iconv6-ENV): Likewise.
(tst-iconv7-ENV): Likewise.
* intl/Makefile (LOCPATH-ENV): Likewise.
(tst-codeset-ENV): Likewise.
(tst-gettext3-ENV): Likewise.
(tst-gettext5-ENV): Likewise.
* libio/Makefile (tst-widetext-ENV): Don't set LOCPATH.
(tst-fopenloc-ENV): Likewise.
(tst-fgetws-ENV): Remove variable.
(tst-ungetwc1-ENV): Likewise.
(tst-ungetwc2-ENV): Likewise.
(bug-ungetwc2-ENV): Likewise.
(tst-swscanf-ENV): Likewise.
(bug-ftell-ENV): Likewise.
(tst-fgetwc-ENV): Likewise.
(tst-fseek-ENV): Likewise.
(tst-ftell-partial-wide-ENV): Likewise.
(tst-ftell-active-handler-ENV): Likewise.
(tst-ftell-append-ENV): Likewise.
* posix/Makefile (tst-fnmatch-ENV): Likewise.
(tst-regexloc-ENV): Likewise.
(bug-regex1-ENV): Likewise.
(tst-regex-ENV): Likewise.
(tst-regex2-ENV): Likewise.
(bug-regex5-ENV): Likewise.
(bug-regex6-ENV): Likewise.
(bug-regex17-ENV): Likewise.
(bug-regex18-ENV): Likewise.
(bug-regex19-ENV): Likewise.
(bug-regex20-ENV): Likewise.
(bug-regex22-ENV): Likewise.
(bug-regex23-ENV): Likewise.
(bug-regex25-ENV): Likewise.
(bug-regex26-ENV): Likewise.
(bug-regex30-ENV): Likewise.
(bug-regex32-ENV): Likewise.
(bug-regex33-ENV): Likewise.
(bug-regex34-ENV): Likewise.
(bug-regex35-ENV): Likewise.
(tst-rxspencer-ENV): Likewise.
(tst-rxspencer-no-utf8-ENV): Likewise.
* stdio-common/Makefile (tst-sprintf-ENV): Likewise.
(tst-sscanf-ENV): Likewise.
(tst-swprintf-ENV): Likewise.
(tst-swscanf-ENV): Likewise.
(test-vfprintf-ENV): Likewise.
(scanf13-ENV): Likewise.
(bug14-ENV): Likewise.
(tst-grouping-ENV): Likewise.
* stdlib/Makefile (tst-strtod-ENV): Likewise.
(tst-strtod3-ENV): Likewise.
(tst-strtod4-ENV): Likewise.
(tst-strtod5-ENV): Likewise.
(testmb2-ENV): Likewise./
* string/Makefile (tst-strxfrm-ENV): Likewise.
(tst-strxfrm2-ENV): Likewise.
(bug-strcoll1-ENV): Likewise.
(test-strcasecmp-ENV): Likewise.
(test-strncasecmp-ENV): Likewise.
* time/Makefile (tst-strptime-ENV): Likewise.
(tst-ftime_l-ENV): Likewise.
* wcsmbs/Makefile (tst-btowc-ENV): Likewise.
(tst-mbrtowc-ENV): Likewise.
(tst-wcrtomb-ENV): Likewise.
(tst-mbrtowc2-ENV): Likewise.
(tst-c16c32-1-ENV): Likewise.
(tst-mbsnrtowcs-ENV): Likewise.
localedata/ChangeLog:
* Makefile (TEST_MBWC_ENV): Remove variable.
(tst_iswalnum-ENV): Likewise.
(tst_iswalpha-ENV): Likewise.
(tst_iswcntrl-ENV): Likewise.
(tst_iswctype-ENV): Likewise.
(tst_iswdigit-ENV): Likewise.
(tst_iswgraph-ENV): Likewise.
(tst_iswlower-ENV): Likewise.
(tst_iswprint-ENV): Likewise.
(tst_iswpunct-ENV): Likewise.
(tst_iswspace-ENV): Likewise.
(tst_iswupper-ENV): Likewise.
(tst_iswxdigit-ENV): Likewise.
(tst_mblen-ENV): Likewise.
(tst_mbrlen-ENV): Likewise.
(tst_mbrtowc-ENV): Likewise.
(tst_mbsrtowcs-ENV): Likewise.
(tst_mbstowcs-ENV): Likewise.
(tst_mbtowc-ENV): Likewise.
(tst_strcoll-ENV): Likewise.
(tst_strfmon-ENV): Likewise.
(tst_strxfrm-ENV): Likewise.
(tst_swscanf-ENV): Likewise.
(tst_towctrans-ENV): Likewise.
(tst_towlower-ENV): Likewise.
(tst_towupper-ENV): Likewise.
(tst_wcrtomb-ENV): Likewise.
(tst_wcscat-ENV): Likewise.
(tst_wcschr-ENV): Likewise.
(tst_wcscmp-ENV): Likewise.
(tst_wcscoll-ENV): Likewise.
(tst_wcscpy-ENV): Likewise.
(tst_wcscspn-ENV): Likewise.
(tst_wcslen-ENV): Likewise.
(tst_wcsncat-ENV): Likewise.
(tst_wcsncmp-ENV): Likewise.
(tst_wcsncpy-ENV): Likewise.
(tst_wcspbrk-ENV): Likewise.
(tst_wcsrtombs-ENV): Likewise.
(tst_wcsspn-ENV): Likewise.
(tst_wcsstr-ENV): Likewise.
(tst_wcstod-ENV): Likewise.
(tst_wcstok-ENV): Likewise.
(tst_wcstombs-ENV): Likewise.
(tst_wcswidth-ENV): Likewise.
(tst_wcsxfrm-ENV): Likewise.
(tst_wctob-ENV): Likewise.
(tst_wctomb-ENV): Likewise.
(tst_wctrans-ENV): Likewise.
(tst_wctype-ENV): Likewise.
(tst_wcwidth-ENV): Likewise.
(tst-digits-ENV): Likewise.
(tst-mbswcs6-ENV): Likewise.
(tst-xlocale1-ENV): Likewise.
(tst-xlocale2-ENV): Likewise.
(tst-strfmon1-ENV): Likewise.
(tst-strptime-ENV): Likewise.
(tst-setlocale-ENV): Don't set LOCPATH.
(bug-iconv-trans-ENV): Remove variable.
(tst-sscanf-ENV): Likewise.
(tst-leaks-ENV): Don't set LOCPATH.
(bug-setlocale1-ENV): Remove variable.
(bug-setlocale1-static-ENV): Likewise.
(tst-setlocale2-ENV): Likewise.
This patch fixes an issue observed running the tst-strtod-round test on
32 bit sparc. In some conditions, strtold calls round_and_return, which in
turn calls __mpn_rshift with cnt = 0, while stdlib/rshift.c explicitly says
that cnts should satisfy 0 < CNT < BITS_PER_MP_LIMB. In this case, the code
end up doing a logical shift right of the same amount than the register,
which is undefined in the C standard.
Due to this bug, 32-bit sparc does not correctly convert the value
"0x1p-16446", but it is likely that other architectures are also
affected for other input values.
glibc's Makeconfig defines some variables such as $(libm) and $(libdl)
for linking with libraries built by glibc, and nptl/Makeconfig
(included by the toplevel Makeconfig) defines others such as
$(shared-thread-library).
In some places glibc's Makefiles use those variables when linking
against the relevant libraries, but in other places they hardcode the
location of the libraries in the build tree. This patch cleans up
various places to use the variables that already exist (in the case of
libm, replacing several duplicate definitions of a $(link-libm)
variable in subdirectory Makefiles). (It's not necessarily exactly
equivalent to what the existing code does - in particular,
$(shared-thread-library) includes libpthread_nonshared, but is
replacing places that just referred to libpthread.so. But I think
that change is desirable on the general principle of linking things as
close as possible to the way in which they would be linked with an
installed library, unless there is a clear reason not to do so.)
To support running tests with an installed copy of glibc without
needing the full build tree from when that copy was built, I think it
will be useful to use such variables more generally and systematically
- every time the rules for building a test refer to some file from the
build tree that's also installed by glibc, use a makefile variable so
that the installed-testing case can point those variables to installed
copies of the files. This patch just deals with straightforward cases
where such variables already exist.
It's quite possible some uses of $(shared-thread-library) should
actually be a new $(thread-library) variable that's set appropriately
in the --disable-shared case, if those uses would in fact work without
shared libraries. I didn't change the status quo that those cases
hardcode use of a shared library whether or not it's actually needed
(but other uses such as $(libm) and $(libdl) would now get the static
library if the shared library isn't built, when some previously
hardcoded use of the shared library - if they actually need shared
libraries, the test itself needs an enable-shared conditional anyway).
Tested x86_64.
* benchtests/Makefile
($(addprefix $(objpfx)bench-,$(bench-math))): Depend on $(libm),
not $(common-objpfx)math/libm.so.
($(addprefix $(objpfx)bench-,$(bench-pthread))): Depend on
$(shared-thread-library), not $(common-objpfx)nptl/libpthread.so.
* elf/Makefile ($(objpfx)noload): Depend on $(libdl), not
$(common-objpfx)dlfcn/libdl.so.
($(objpfx)tst-audit8): Depend on $(libm), not
$(common-objpfx)math/libm.so.
* malloc/Makefile ($(objpfx)libmemusage.so): Depend on $(libdl),
not $(common-objpfx)dlfcn/libdl.so.
* math/Makefile
($(addprefix $(objpfx),$(filter-out $(tests-static),$(tests)))):
Depend on $(libm), not $(objpfx)libm.so. Do not condition on
[$(build-shared) = yes].
($(objpfx)test-fenv-tls): Depend on $(shared-thread-library), not
$(common-objpfx)nptl/libpthread.so.
* misc/Makefile ($(objpfx)tst-tsearch): Depend on $(libm), not
$(common-objpfx)math/libm.so$(libm.so-version) or
$(common-objpfx)math/libm.a depending on [$(build-shared) = yes].
* nptl/Makefile ($(objpfx)tst-unload): Depend on $(libdl), not
$(common-objpfx)dlfcn/libdl.so.
* setjmp/Makefile (link-libm): Remove variable.
($(objpfx)tst-setjmp-fp): Depend on $(libm), not $(link-libm).
* stdio-common/Makefile (link-libm): Remove variable.
($(objpfx)tst-printf-round): Depend on $(libm), not $(link-libm).
* stdlib/Makefile (link-libm): Remove variable.
($(objpfx)bug-getcontext): Depend on $(libm), not $(link-libm).
($(objpfx)tst-strtod-round): Likewise.
($(objpfx)tst-tininess): Likewise.
($(objpfx)tst-strtod-underflow): Likewise.
($(objpfx)tst-strtod6): Likewise.
($(objpfx)tst-tls-atexit): Depend on $(shared-thread-library) and
$(libdl), not $(common-objpfx)nptl/libpthread.so and
$(common-objpfx)dlfcn/libdl.so.
The upstream version of GMP has long removed this conditional
altogether in this commit:
changeset: 5254:88618a4694ac
user: Kevin Ryde <user42@zip.com.au>
date: Sun Jun 17 01:37:27 2001 +0200
So just turn the #if into an #ifdef to silence the warning.
ChangeLog:
2014-05-14 Will Newton <will.newton@linaro.org>
* stdlib/gmp-impl.h: Test USE_STACK_ALLOC #ifdef
rather than #if.
On aarch64 calling swapcontext clobbers the state of the signal
stack (BZ #16629). Check that the address and size of the signal
stack before and after the call to swapcontext remains the same.
ChangeLog:
2014-04-17 Will Newton <will.newton@linaro.org>
[BZ #16629]
* stdlib/tst-setcontext.c: Include signal.h.
(main): Check that the signal stack before and
after swapcontext is the same.
This patch is a revised and updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>.
In order to generate overall summaries of the results of all tests in
the glibc testsuite, we need to identify and concatenate the files
with the results of individual tests.
Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this.
However, the normal glibc approach is explicit enumeration of the
expected set of files with a given property, rather than all files
matching some pattern like that. Furthermore, we would like to be
able to mark tests as UNRESOLVED if the file with their results is for
some reason missing, and in future we would like to be able to mark
tests as UNSUPPORTED if they are disabled for a particular
configuration (rather than simply having them missing from the list of
tests as at present). Such handling of tests that were not run or did
not record results requires an explicit enumeration of tests.
For the tests following the default makefile rules, $(tests) (and
$(xtests)) provides such an enumeration. Others, however, are added
directly as dependencies of the "tests" and "xtests" makefile
targets. This patch changes the makefiles to put them in variables
tests-special and xtests-special, with appropriate dependencies on the
tests listed there then being added centrally.
Those variables are used in Rules and so need to be set before Rules
is included in a subdirectory makefile, which is often earlier in the
makefile than the dependencies were present before. We previously
discussed the question of where to include Rules; see the question at
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a
discussion in
<https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why
Rules is included early rather than late in subdirectory makefiles.
It was necessary to avoid an indirection through the check-abi target
and get the check-abi-* targets for individual libraries into the
tests-special variable. The intl/ test $(objpfx)tst-gettext.out,
previously built only because of dependencies from other tests, was
also added to tests-special for the same reason.
The entries in tests-special are the full makefile targets, complete
with $(objpfx) and .out. If a future change causes tests to be named
consistently with a .out suffix, this can be changed to include just
the path relative to $(objpfx), without .out.
Tested x86_64, including that the same set of files is generated in
the build directory by a build and testsuite run both before and after
the patch (except for changes to the
elf/tst-null-argv.debug.out.<number> file name), and a build with
run-built-tests=no to verify there aren't any more obvious instances
of the issue Marcus Shawcroft reported with a previous version in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>.
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(tests): Depend on $(tests-special).
* Makerules (check-abi-list): New variable.
(check-abi): Depend on $(check-abi-list).
[$(subdir) = elf] (tests-special): Add
$(objpfx)check-abi-libc.out.
[$(build-shared) = yes && subdir] (tests-special): Add
$(check-abi-list).
[$(build-shared) = yes && subdir] (tests): Do not depend on
check-abi.
* Rules (tests): Depend on $(tests-special).
(xtests): Depend on $(xtests-special).
* catgets/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* conform/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* elf/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* grp/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* iconv/Makefile (xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* iconvdata/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* intl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable. Also add
$(objpfx)tst-gettext.out.
* io/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* libio/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* malloc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* misc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl_db/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* posix/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* resolv/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* stdio-common/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(do-tst-unbputc): Remove target.
(do-tst-printf): Likewise.
* stdlib/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* string/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* sysdeps/x86/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
localedata:
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information. No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.
This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules). Includes are added if needed, or moved up if already
present. Subdirectory "all:" targets are removed, since Makeconfig
provides one.
There is potential for further cleanups I haven't done. Rules and
Makerules have code such as
ifneq "$(findstring env,$(origin headers))" ""
headers :=
endif
to override to empty any value of various variables that came from the
environment. I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable. (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.) Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves. The special code to override values coming
from the environment would then be obsolete and could be removed.
Tested x86_64, including that installed binaries are identical before
and after the patch.
* argp/Makefile: Include Makeconfig immediately after defining
subdir.
* assert/Makefile: Likewise.
* benchtests/Makefile: Likewise.
* catgets/Makefile: Likewise.
* conform/Makefile: Likewise.
* crypt/Makefile: Likewise.
* csu/Makefile: Likewise.
(all): Remove target.
* ctype/Makefile: Include Makeconfig immediately after defining
subdir.
* debug/Makefile: Likewise.
* dirent/Makefile: Likewise.
* dlfcn/Makefile: Likewise.
* gmon/Makefile: Likewise.
* gnulib/Makefile: Likewise.
* grp/Makefile: Likewise.
* gshadow/Makefile: Likewise.
* hesiod/Makefile: Likewise.
* hurd/Makefile: Likewise.
(all): Remove target.
* iconvdata/Makefile: Include Makeconfig immediately after
defining subdir.
* inet/Makefile: Likewise.
* intl/Makefile: Likewise.
* io/Makefile: Likewise.
* libio/Makefile: Likewise.
(all): Remove target.
* locale/Makefile: Include Makeconfig immediately after defining
subdir.
* login/Makefile: Likewise.
* mach/Makefile: Likewise.
(all): Remove target.
* malloc/Makefile: Include Makeconfig immediately after defining
subdir.
(all): Remove target.
* manual/Makefile: Include Makeconfig immediately after defining
subdir.
* math/Makefile: Likewise.
* misc/Makefile: Likewise.
* nis/Makefile: Likewise.
* nss/Makefile: Likewise.
* po/Makefile: Likewise.
(all): Remove target.
* posix/Makefile: Include Makeconfig immediately after defining
subdir.
* pwd/Makefile: Likewise.
* resolv/Makefile: Likewise.
* resource/Makefile: Likewise.
* rt/Makefile: Likewise.
* setjmp/Makefile: Likewise.
* shadow/Makefile: Likewise.
* signal/Makefile: Likewise.
* socket/Makefile: Likewise.
* soft-fp/Makefile: Likewise.
* stdio-common/Makefile: Likewise.
* stdlib/Makefile: Likewise.
* streams/Makefile: Likewise.
* string/Makefile: Likewise.
* sunrpc/Makefile: Likewise.
(all): Remove target.
* sysvipc/Makefile: Include Makeconfig immediately after defining
subdir.
* termios/Makefile: Likewise.
* time/Makefile: Likewise.
* timezone/Makefile: Likewise.
(all): Remove target.
* wcsmbs/Makefile: Include Makeconfig immediately after defining
subdir.
* wctype/Makefile: Likewise.
libidn/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
localedata/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
(all): Remove target.
nptl/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
nptl_db/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
This patch cleans up cases of __USE_MISC that are trivially redundant
after the recent substitution of __USE_MISC for __USE_BSD and
__USE_SVID: either in constructs such as "defined __USE_MISC ||
defined __USE_MISC", or else (in the bits/mman.h case) a conditional
on __USE_MISC nested inside another __USE_MISC conditional. (The
cleanups remaining after this patch are still quite large, but it
seems a reasonable piece to separate out.)
Tested x86_64.
* bits/mman.h [__USE_MISC]: Remove redundant conditionals.
* ctype/ctype.h [__USE_MISC]: Likewise.
* dirent/dirent.h [__USE_MISC]: Likewise.
* grp/grp.h [__USE_MISC]: Likewise.
* io/fcntl.h [__USE_MISC]: Likewise.
* io/sys/stat.h [__USE_MISC]: Likewise.
* libio/stdio.h [__USE_MISC]: Likewise.
* posix/unistd.h [__USE_MISC]: Likewise.
* pwd/pwd.h [__USE_MISC]: Likewise.
* stdlib.h [__USE_MISC]: Likewise.
* string/bits/string2.h [__USE_MISC]: Likewise.
* string/string.h [__USE_MISC]: Likewise.
* time/time.h [__USE_MISC]: Likewise.
This feature is specifically for the C++ compiler to offload calling
thread_local object destructors on thread program exit, to glibc.
This is to overcome the possible complication of destructors of
thread_local objects getting called after the DSO in which they're
defined is unloaded by the dynamic linker. The DSO is marked as
'unloadable' if it has a constructed thread_local object and marked as
'unloadable' again when all the constructed thread_local objects
defined in it are destroyed.
For some tests, just claim that fetestexcept() always returns true,
so the rest of the test can be compiled.
For libm-test, provide known bogus values for unsupported rounding
modes, so fesetround() will return failure.
Elsewhere, just add some #ifdefs to avoid code that uses particular
FP exceptions if the exceptions aren't supported.
[BZ #13970]
(strtod, strtof, strtold, strtol, strtoul, strtoq)
(strtouq, strtoll, strtoull, strtol_l, strtoul_l, strtoll_l, strtoull_l)
(strtod_l, strtof_l, strtold_l): Remove __wur.
It is not necessarily an error to ignore strtol's return value.
One can reliably look at the stored endptr to decide whether
the number had valid syntax.
