With the clock_gettime64 call we prefer to use vDSO. There is no call
to clock_gettime64 on glibc with older headers and kernel 5.1+ if it
doesn't support vDSO.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Add support for the clock_gettim64 vDSO calls. These are protected by
the HAVE_CLOCK_GETTIME64_VSYSCALL define.
HAVE_CLOCK_GETTIME64_VSYSCALL should be defined for 32-bit platforms
(WORDSIZE == 32) that only run on the 5.1 kernel or later. WORDSIZE ==
64 platforms can use #define __vdso_clock_gettime64 __vdso_clock_gettime
and use the __vdso_clock_gettime syscall as they don't have a
__vdso_clock_gettime64 call.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Debugging programs that have been dynamically linked against an
uninstalled glibc requires unusual steps, such as letting gdb know where
the thread db library is located and explicitly calling the loader.
However, when the program under test is statically linked, these steps
are not required (as a matter of fact, using the dynamic loader to run a
statically linked program is wrong and will fail), and gdb should be
called the usual way.
This patch modifies debugglibc.sh so that it checks if the program under
test is statically linked, then runs the debugger appropriately.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Some test cases are meant to be ran inside the container infrastructure
and make check automatically runs them as such. However, running a
single test case in a container without make check is useful.
This patch adds a new --tool option to testrun.sh that makes this easy,
as well as it adds a new option (-c or --in-container) to debugglibc.sh,
which causes the program under test to be ran in a container (with
WAIT_FOR_DEBUGGER=1), then automatically attaches GDB to it.
Automatically detecting if a test case is supposed to be ran inside a
container is harder (if not impossible), as Carlos pointed out [1],
however, this patch makes it easier to do it manually:
Using testrun.sh with containerized test:
$ ./testrun.sh --tool=container /absolute/path/to/program
Using debugglibc.sh with containerized test:
$ ./debugglibc.sh -c /absolute/path/to/program
Note: running these commands with relative paths causes error and
warning messages to be displayed, although the test case might succeed.
For example, with relative path:
$ ./testrun.sh --tool=container elf/tst-ldconfig-bad-aux-cache
error: subprocess failed: execv
error: unexpected error output from subprocess
/sbin/ldconfig: Warning: ignoring configuration file that cannot be opened: /etc/ld.so.conf: No such file or directory
info: f 0 1064 /var/cache/ldconfig/aux-cache 20 aux-cache
[...]
Whereas with absolute paths, the errors and warnings are gone:
$ ./testrun.sh --tool=container $PWD/elf/tst-ldconfig-bad-aux-cache
info: f 0 1064 /var/cache/ldconfig/aux-cache 20 aux-cache
[...]
[1] https://sourceware.org/ml/libc-alpha/2019-11/msg00873.html
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since commit a3cc4f48e9 ("Remove
--as-needed configure test."), --as-needed support is no longer
optional.
The macros are not much shorter and do not provide documentary
value, either, so this commit removes them.
This links in CET support if GCC defaults to CET. Otherwise, __CET__
is defined, yet CET functionality is not compiled and linked into the
dynamic loader, resulting in a linker failure due to undefined
references to _dl_cet_check and _dl_open_check.
Since the commit
commit 86a0f56158
Author: Rajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com>
Date: Thu Jun 28 13:57:50 2018 +0530
ldbl-128ibm-compat: Introduce ieee128 symbols
IEEE long double versions of strfroml, strtold, and wcstold have been
prepared, but not exposed (which will only happen when the full support
for IEEE long double is complete). This patch adds tests for these
functions in both IBM and IEEE long double mode.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
This patch adds elementary tests to check that strfmon and strfmon_l
correctly evaluate long double values with IBM Extended Precision and
IEEE binary128 format.
Tested for powerpc64le.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
Similarly to what has been done for printf-like functions, more
specifically to the internal implementation in __vfprintf_internal, this
patch extends __vstrfmon_l_internal to deal with long double values with
binary128 format (as a third format option and reusing the float128
implementation).
Tested for powerpc64le, powerpc64, x86_64, and with build-many-glibcs.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
Several commits to the ldbl-128ibm-compat directory added new files
where the URL in the copyright notice pointed to an http, rather than to
an https, address. This happened because I copied the notices before
commit ID 5a82c74822. This trivial patch fixes this issue.
This commit adds missing skip_ifunc checks to aarch64, arm, i386,
sparc, and x86_64. A new test case ensures that IRELATIVE IFUNC
resolvers do not run in various diagnostic modes of the dynamic
loader.
Reviewed-By: Szabolcs Nagy <szabolcs.nagy@arm.com>
ld.so symbols to be overriden by libc need to be extern to really get
overriden. __access happens to have never been exposed, putting it to
GLIBC_PRIVATE.
ld.so symbols to be overriden by libc need to be extern to really get
overriden. __getcwd happens to have never been exposed, putting it to
GLIBC_PRIVATE.
This patch updates the kernel version in the test tst-mman-consts.py
to 5.4. (There are no new constants covered by this test in 5.4 that
need any other header changes.)
Tested with build-many-glibcs.py.
Linux 5.4 changes the SOMAXCONN value from 128 to 4096 (this isn't in
a uapi header; various constants related to the kernel/userspace
interface, including this one, are in the non-uapi linux/socket.h
header).
This patch increases the value in glibc. As I understand it, it is
safe to use a higher value even with older kernels (the kernel will
simply adjust the value passed to listen to be no more than the value
supported in the kernel), and SOMAXCONN is actually only a default for
a sysctl value in the kernel that can be changed at runtime. So I
think updating the value in glibc is a reasonable and safe thing to
do.
Tested for x86_64.
This patch updates syscall-names.list for Linux 5.4. There are no new
syscalls, so this is just a matter of updating the version number
listed in the file.
Tested with build-many-glibcs.py.
Linux 5.4 adds constants MADV_COLD and MADV_PAGEOUT (defined with the
same values on all architectures). This patch adds them to
bits/mman-linux.h.
Tested for x86_64.
This reverts the non-test change from commit d0093c5cef
("Call _dl_open_check after relocation [BZ #24259]"), given that
the underlying bug has been fixed properly in commit 61b74477fa7f63
("Remove all loaded objects if dlopen fails, ignoring NODELETE
[BZ #20839]").
Tested on x86-64-linux-gnu, with and without --enable-cet.
Change-Id: I995a6cfb89f25d2b0cf5e606428c2a93eb48fc33
Lazy binding in a signal handler that interrupts a dlopen sees
intermediate dynamic linker state. This has likely been always
unsafe, but with the new pending NODELETE state, this is clearly
incorrect. Other threads are excluded via the loader lock, but the
current thread is not. Blocking signals until right before ELF
constructors run is the safe thing to do.
Change-Id: Iad079080ebe7442c13313ba11dc2797953faef35
This introduces a “pending NODELETE” state in the link map, which is
flipped to the persistent NODELETE state late in dlopen, via
activate_nodelete. During initial relocation, symbol binding
records pending NODELETE state only. dlclose ignores pending NODELETE
state. Taken together, this results that a partially completed dlopen
is rolled back completely because new NODELETE mappings are unloaded.
Tested on x86_64-linux-gnu and i386-linux-gnu.
Change-Id: Ib2a3d86af6f92d75baca65431d74783ee0dbc292
This change splits the scope and TLS slotinfo updates in dlopen into
two parts: one to resize the data structures, and one to actually apply
the update. The call to add_to_global_resize in dl_open_worker is moved
before the demarcation point at which no further memory allocations are
allowed.
_dl_add_to_slotinfo is adjusted to make the list update optional. There
is some optimization possibility here because we could grow the slotinfo
list of arrays in a single call, one the largest TLS modid is known.
This commit does not fix the fatal meory allocation failure in
_dl_update_slotinfo. Ideally, this error during dlopen should be
recoverable.
The update order of scopes and TLS data structures is retained, although
it appears to be more correct to fully initialize TLS first, and then
expose symbols in the newly loaded objects via the scope update.
Tested on x86_64-linux-gnu.
Change-Id: I240c58387dabda3ca1bcab48b02115175fa83d6c
The call to add_to_global in dl_open_worker happens after running ELF
constructors for new objects. At this point, proper recovery from
malloc failure would be quite complicated: We would have to run the
ELF destructors and close all opened objects, something that we
currently do not do.
Instead, this change splits add_to_global into two phases,
add_to_global_resize (which can raise an exception, called before ELF
constructors run), and add_to_global_update (which cannot, called
after ELF constructors). A complication arises due to recursive
dlopen: After the inner dlopen consumes some space, the pre-allocation
in the outer dlopen may no longer be sufficient. A new member in the
namespace structure, _ns_global_scope_pending_adds keeps track of the
maximum number of objects that need to be added to the global scope.
This enables the inner add_to_global_resize call to take into account
the needs of an outer dlopen.
Most code in the dynamic linker assumes that the number of global
scope entries fits into an unsigned int (matching the r_nlist member
of struct r_scop_elem). Therefore, change the type of
_ns_global_scope_alloc to unsigned int (from size_t), and add overflow
checks.
Change-Id: Ie08e2f318510d5a6a4bcb1c315f46791b5b77524
If a lazy binding failure happens during the execution of an ELF
constructor or destructor, the dynamic loader catches the error
and reports it using the dlerror mechanism. This is undesirable
because there could be other constructors and destructors that
need processing (which are skipped), and the process is in an
inconsistent state at this point. Therefore, we have to issue
a fatal dynamic loader error error and terminate the process.
Note that the _dl_catch_exception in _dl_open is just an inner catch,
to roll back some state locally. If called from dlopen, there is
still an outer catch, which is why calling _dl_init via call_dl_init
and a no-exception is required and cannot be avoiding by moving the
_dl_init call directly into _dl_open.
_dl_fini does not need changes because it does not install an error
handler, so errors are already fatal there.
Change-Id: I6b1addfe2e30f50a1781595f046f44173db9491a
This introduces a concept of trusted name servers, for which the
AD bit is passed through to applications. For untrusted name
servers (the default), the AD bit in responses are cleared, to
provide a safe default.
This approach is very similar to the one suggested by Pavel Šimerda
in <https://bugzilla.redhat.com/show_bug.cgi?id=1164339#c15>.
The DNS test framework in support/ is enhanced with support for
setting the AD bit in responses.
Tested on x86_64-linux-gnu.
Change-Id: Ibfe0f7c73ea221c35979842c5c3b6ed486495ccc
Obtaining the link map is potentially very slow because it requires
iterating over all loaded objects in the current implementation. If
the caller supplied an explicit handle (i.e., not one of the RTLD_*
constants), the dlsym implementation does not need the identity of the
caller (except in the special case of auditing), so this change
avoids computing it in that case.
Even in the minimal case (dlsym called from a main program linked with
-dl), this shows a small speedup, perhaps around five percent. The
performance improvement can be arbitrarily large in principle (if
_dl_find_dso_for_object has to iterate over many link maps).
Change-Id: Ide5d9e2cc7ac25a0ffae8fb4c26def0c898efa29
Commit c402355dfa ("libio: Disable
vtable validation in case of interposition [BZ #23313]") only covered
the interposable glibc 2.1 handles, in libio/stdfiles.c. The
parallel code in libio/oldstdfiles.c needs similar detection logic.
Fixes (again) commit db3476aff1
("libio: Implement vtable verification [BZ #20191]").
Change-Id: Ief6f9f17e91d1f7263421c56a7dc018f4f595c21
Similarly to __vfprintf_internal and __vfscanf_internal, the internal
implementation of syslog functions (__vsyslog_internal) takes a
'mode_flags' parameter used to select the format of long double
parameters. This patch adds variants of the syslog functions that set
'mode_flags' to PRINTF_LDBL_USES_FLOAT128, thus enabling the correct
printing of long double values on powerpc64le, when long double has IEEE
binary128 format (-mabi=ieeelongdouble).
Tested for powerpc64le.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Joseph Myers <joseph@codesourcery.com>
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
Similarly to the functions from the *printf family, this patch adds
implementations for __obstack_*printf* functions that set the
'mode_flags' parameter to PRINTF_LDBL_USES_FLOAT128, before making calls
to __vfprintf_internal (indirectly through __obstack_vprintf_internal).
Tested for powerpc64le.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
Commit IDs 9771e6cb51 and 7597b0c7f7 added tests for the functions
from err.h and error.h that can take long double parameters.
Afterwards, commit ID f0eaf86276 reused them on architectures that
changed the long double format from the same as double to something else
(i.e.: architectures that imply ldbl-opt). This patch reuses it again
for IEEE long double on powerpc64le.
Tested for powerpc64le.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
Use the recently added, internal functions, __error_at_line_internal and
__error_internal, to provide error.h functions that can take long double
arguments with IEEE binary128 format on platforms where long double can
also take double format or some non-IEEE format (currently, this means
powerpc64le).
Tested for powerpc64le.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
Use the recently added, internal functions, __vwarnx_internal and
__vwarn_internal, to provide err.h functions that can take long double
arguments with IEEE binary128 format on platforms where long double can
also take double format or some non-IEEE format (currently, this means
powerpc64le).
Tested for powerpc64le.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
Use the recently added, internal functions, __argp_error_internal and
__argp_failure_internal, to provide argp_error and argp_failure that can
take long double arguments with IEEE binary128 format on platforms where
long double can also take double format or some non-IEEE format
(currently, this means powerpc64le).
Tested for powerpc64le.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
This patch removes the arch-specific atomic instruction, relying on
compiler builtins. The __sparc32_atomic_locks support is removed
and a configure check is added to check if compiler uses libatomic
to implement CAS.
It also removes the sparc specific sem_* and pthread_barrier_*
implementations. It in turn allows buidling against a LEON3/LEON4
sparcv8 target, although it will still be incompatible with generic
sparcv9.
Checked on sparcv9-linux-gnu and sparc64-linux-gnu. I also checked
with build against sparcv8-linux-gnu with -mcpu=leon3.
Tested-by: Andreas Larsson <andreas@gaisler.com>
The patch is straighforward:
- The sparc32 v8 implementations are moved as the generic ones.
- A configure test is added to check for either __sparc_v8__ or
__sparc_v9__.
- The triple names are simplified and sparc implies sparcv8.
The idea is to keep support on sparcv8 architectures that does support
CAS instructions, such as LEON3/LEON4.
Checked on a sparcv9-linux-gnu and sparc64-linux-gnu.
Tested-by: Andreas Larsson <andreas@gaisler.com>
If the specified needle crosses a page-boundary, the s390-z15 ifunc variant of
strstr truncates the needle which results in invalid results.
This is fixed by loading the needle beyond the page boundary to v18 instead of v16.
The bug is sometimes observable in test-strstr.c in check1 and check2 as the
haystack and needle is stored on stack. Thus the needle can be on a page boundary.
check2 is now extended to test haystack / needles located on stack, at end of page
and on two pages.
This bug was introduced with commit 6f47401bd5
("S390: Add arch13 strstr ifunc variant.") and is already released in glibc 2.30.
The nptl: Add struct_mutex.h added a wrong initializer for
architectures that uses the generic struct_mutex.h.
Checked on sparcv9-linux-gnu (where I noted the issue with the
nptl/tst-initializers1*).
In GCC 10, the default at -O2 is now -ftree-loop-distribute-patterns.
This optimization causes GCC to "helpfully" convert the hand-written
loop in _dl_start into a call to memset, which is not available that
early in program startup. Similar problems in other places in GLIBC
have been addressed by explicitly building with
-fno-tree-loop-distribute-patterns, but this one may have been
overlooked previously because it only affects targets where
HAVE_BUILTIN_MEMSET is not defined.
This patch fixes a bug observed on nios2-linux-gnu target that caused
all programs to segv on startup.
Now that both pthread_mutex_t and pthread_rwlock_t static initializer
are parametrized in their own headers HPPA pthread.h is identical to
generic nptl one.
Checked on hppa-linux-gnu.
Change-Id: I236cfceb5656cfcce42c9e367a4f6803e2abd88b
This patch adds a default pthread-offsets.h based on default
thread definitions from struct_mutex.h and struct_rwlock.h.
The idea is to simplify new ports inclusion.
Checked with a build on affected abis.
Change-Id: I7785a9581e651feb80d1413b9e03b5ac0452668a
This patch adds a default pthreadtypes-arch.h, the idea is to simpify
new ports inclusion and an override is required only if the architecture
adds some arch-specific extensions or requirement.
The default values on the new generic header are based on current
architecture define value and they are not optimal compared to current
code requirements as below.
- On 64 bits __SIZEOF_PTHREAD_BARRIER_T is defined as 32 while is
sizeof (struct pthread_barrier) is 20 bytes.
- On 32 bits __SIZEOF_PTHREAD_ATTR_T is defined as 36 while
sizeof (struct pthread_attr) is 32.
The default values are not changed so the generic header could be
used by some architectures.
Checked with a build on affected abis.
Change-Id: Ie0cd586258a2650f715c1af0c9fe4e7063b0409a
This patch adds a new generic __pthread_rwlock_arch_t definition meant
to be used by new ports. Its layout mimics the current usage on some
64 bits ports and it allows some ports to use the generic definition.
The arch __pthread_rwlock_arch_t definition is moved from
pthreadtypes-arch.h to another arch-specific header (struct_rwlock.h).
Also the static intialization macro for pthread_rwlock_t is set to use
an arch defined on (__PTHREAD_RWLOCK_INITIALIZER) which simplifies its
implementation.
The default pthread_rwlock_t layout differs from current ports with:
1. Internal layout is the same for 32 bits and 64 bits.
2. Internal flag is an unsigned short so it should not required
additional padding to align for word boundary (if it is the case
for the ABI).
Checked with a build on affected abis.
Change-Id: I776a6a986c23199929d28a3dcd30272db21cd1d0
The current way of defining the common mutex definition for POSIX and
C11 on pthreadtypes-arch.h (added by commit 06be6368da) is
not really the best options for newer ports. It requires define some
misleading flags that should be always defined as 0
(__PTHREAD_COMPAT_PADDING_MID and __PTHREAD_COMPAT_PADDING_END), it
exposes options used solely for linuxthreads compat mode
(__PTHREAD_MUTEX_USE_UNION and __PTHREAD_MUTEX_NUSERS_AFTER_KIND), and
requires newer ports to explicit define them (adding more boilerplate
code).
This patch adds a new default __pthread_mutex_s definition meant to
be used by newer ports. Its layout mimics the current usage on both
32 and 64 bits ports and it allows most ports to use the generic
definition. Only ports that use some arch-specific definition (such
as hardware lock-elision or linuxthreads compat) requires specific
headers.
For 32 bit, the generic definitions mimic the other 32-bit ports
of using an union to define the fields uses on adaptive and robust
mutexes (thus not allowing both usage at same time) and by using a
single linked-list for robust mutexes. Both decisions seemed to
follow what recent ports have done and make the resulting
pthread_mutex_t/mtx_t object smaller.
Also the static intialization macro for pthread_mutex_t is set to use
a macro __PTHREAD_MUTEX_INITIALIZER where the architecture can redefine
in its struct_mutex.h if it requires additional fields to be
initialized.
Checked with a build on affected abis.
Change-Id: I30a22c3e3497805fd6e52994c5925897cffcfe13
The new rwlock implementation added by cc25c8b4c1 (2.25) removed
support for lock-elision. This patch removes remaining the
arch-specific unused definitions.
Checked with a build against all affected ABIs.
Change-Id: I5dec8af50e3cd56d7351c52ceff4aa3771b53cd6
This patch new build tests to check for internal fields offsets for
internal pthread_rwlock_t definition. Althoug the '__data.__flags'
field layout should be preserved due static initializators, the patch
also adds tests for the futexes that may be used in a shared memory
(although using different libc version in such scenario is not really
supported).
Checked with a build against all affected ABIs.
Change-Id: Iccc103d557de13d17e4a3f59a0cad2f4a640c148
