ldbl-128ibm uses ldbl-128 e_lgammal_r implementation as is, however some
constants definitions overflows for IBM long double range. This patch
suppress the compiler warnings until the ldbl-128ibm implementation is
fixed.
This patch fixes spurious underflows from ldbl-128 expm1l, as reported
in <https://sourceware.org/ml/libc-alpha/2014-06/msg00835.html> and
exposed by the tests added for such a bug in the x86 / x86-64
version. The bug and fix are essentially the same, so no separate bug
is filed in Bugzilla.
Tested for mips64.
[BZ #16539]
* sysdeps/ieee754/ldbl-128/s_expm1l.c: Include <float.h>.
(__expm1l): Return argument unchanged when small but not
subnormal.
This patch fixes bug 17097, ldbl-128 powl producing overflowing /
underflowing results with positive sign when the result should have
been negative. This was shown up by the tests in non-default rounding
modes added by my patch for bug 16315, but isn't actually limited to
non-default rounding modes: rather, when rounding to nearest the
wrappers produced a result with the correct sign and so always hid the
bug unless -lieee was used to disable the wrappers. The problem is
that in the cases where Y is large enough that the result overflows or
underflows for X not very close to 1, but not large enough to overflow
or underflow for all X != +/- 1 (in the latter case Y is always an
even integer), a positive overflowing / underflowing result is always
returned, rather than one with the correct sign. This patch moves the
relevant part of computation of the sign earlier and returns a result
of the correct sign.
Tested for mips64.
[BZ #17097]
* sysdeps/ieee754/ldbl-128/e_powl.c (__ieee754_powl): Return
result with correct sign in case of exponents that produce
overflow except for X very close to 1.
This patch fixes bugs 16561 and 16562, bad results of yn in overflow
cases in non-default rounding modes, both because an intermediate
overflow in the recurrence does not get detected if the result is not
an infinity and because an overflowing result may occur in the wrong
sign. The fix is to set FE_TONEAREST mode internally for the parts of
the function where such overflows can occur (which includes the call
to y1 - where yn is used to compute a Bessel function of order -1,
negating the result of y1 isn't correct for overflowing results in
directed rounding modes) and then compute an overflowing value in the
original rounding mode if the to-nearest result was an infinity.
Tested x86_64 and x86 and ulps updated accordingly. Also tested for
mips64 and powerpc32 to test the ldbl-128 and ldbl-128ibm changes.
(The tests for these bugs were added in my previous y1 patch, so the
only thing this patch has to do with the testsuite is enable yn
testing in all rounding modes.)
[BZ #16561]
[BZ #16562]
* sysdeps/ieee754/dbl-64/e_jn.c: Include <float.h>.
(__ieee754_yn): Set FE_TONEAREST mode internally and then
recompute overflowing results in original rounding mode.
* sysdeps/ieee754/flt-32/e_jnf.c: Include <float.h>.
(__ieee754_ynf): Set FE_TONEAREST mode internally and then
recompute overflowing results in original rounding mode.
* sysdeps/ieee754/ldbl-128/e_jnl.c: Include <float.h>.
(__ieee754_ynl): Set FE_TONEAREST mode internally and then
recompute overflowing results in original rounding mode.
* sysdeps/ieee754/ldbl-128ibm/e_jnl.c: Include <float.h>.
(__ieee754_ynl): Set FE_TONEAREST mode internally and then
recompute overflowing results in original rounding mode.
* sysdeps/ieee754/ldbl-96/e_jnl.c: Include <float.h>.
(__ieee754_ynl): Set FE_TONEAREST mode internally and then
recompute overflowing results in original rounding mode.
* sysdeps/i386/fpu/fenv_private.h [!__SSE2_MATH__]
(libc_feholdsetround_ctx): New macro.
* math/libm-test.inc (yn_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps : Likewise.
This patch fixes spurious underflows from exp10 for arguments near 0
(part of bug 16560; that bug also includes spurious underflows from
exp2, which are not fixed by this patch). The problem is underflows
in the internal computation converting the exp10 argument to arguments
for exp (with extra precision), and the fix is simply to return 1
early for arguments near enough to 0 (just as arguments with large
enough magnitude have their own overflow / underflow logic at the
start of the function).
Tested x86_64 and x86 and ulps updated accordingly; also tested for
powerpc32 and mips64 to validate the ldbl-128ibm and ldbl-128 changes.
[BZ #16560]
* sysdeps/ieee754/dbl-64/e_exp10.c (__ieee754_exp10): Return 1 for
arguments close to 0.
* sysdeps/ieee754/ldbl-128/e_exp10l.c (__ieee754_exp10l):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_exp10l.c (__ieee754_exp10l):
Likewise.
* math/auto-libm-test-in: Add more tests of exp10.
* math/auto-libm-test-out: Regenerated.
* sysdeps/x86_64/fpu/libm-test-ulps: Update.
This patch fixes bug 16287, spurious underflows from ldbl-128 erfl
arising from it calling erfcl for arguments with absolute value at
least 1.0, although for large positive arguments erfcl correctly
underflows but erfl shouldn't. The fix is simply to avoid calling
erfcl, and just return 1, for arguments above a cut-off large enough
that erfl correctly rounds to-nearest as 1 but not so large that erfcl
underflows.
Tested mips64. Also tested x86_64 and x86 to confirm the new tests
(taken from the tests of erfc) don't cause any problems there; no ulps
updates needed.
[BZ #16287]
* sysdeps/ieee754/ldbl-128/s_erfl.c (__erfl): Return 1 without
calling __erfcl for arguments at least 16.
* math/auto-libm-test-in: Add more tests of erf.
* math/auto-libm-test-out: Regenerated.
This patch fixes bug 16354, spurious underflows from cosh when a tiny
argument is passed to expm1 and expm1 correctly underflows although
the final result of cosh should be 1. As noted in that bug, some
cases are latent because of expm1 implementations not raising
underflow (bug 16353), but all the implementations are fixed
similarly. They already contained checks for tiny arguments, but the
checks were too late to avoid underflow from expm1 (although they
would avoid underflow from subsequent squaring of the result of
expm1); they are moved before the expm1 calls.
The thresholds used for considering arguments tiny are not
particularly consistent in how they relate to the precision of the
floating-point format in question. They are, however, all sufficient
to ensure that the round-to-nearest result of cosh is indeed 1 below
the threshold (although sometimes they are smaller than necessary).
But the previous logic did not return 1, but the previously computed 1
+ expm1(abs(x)) value. And the thresholds in the ldbl-128 and
ldbl-128ibm code (0x1p-71L - I suspect 0x3f8b was intended in the code
instead of 0x3fb8 - and (roughly) 0x1p-55L) are not sufficient for
that value to be 1. So by moving the test for tiny arguments, and
consequently returning 1 directly now the expm1 value hasn't been
computed by that point, this patch also fixes bug 17061, the (large
number of ulps) inaccuracy for small arguments in those
implementations. Tests for that bug are duly added.
Tested x86_64 and x86 and ulps updated accordingly. Also tested for
mips64 and powerpc32 to validate the ldbl-128 and ldbl-128ibm changes.
[BZ #16354]
[BZ #17061]
* sysdeps/ieee754/dbl-64/e_cosh.c (__ieee754_cosh): Check for
small arguments before calling __expm1.
* sysdeps/ieee754/flt-32/e_coshf.c (__ieee754_coshf): Check for
small arguments before calling __expm1f.
* sysdeps/ieee754/ldbl-128/e_coshl.c (__ieee754_coshl): Check for
small arguments before calling __expm1l.
* sysdeps/ieee754/ldbl-128ibm/e_coshl.c (__ieee754_coshl):
Likewise.
* sysdeps/ieee754/ldbl-96/e_coshl.c (__ieee754_coshl): Likewise.
* math/auto-libm-test-in: Add more cosh tests. Do not allow
spurious underflow for some cosh tests.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
This patch fixes bug 17050, missing errno setting for y1 overflow (for
small positive arguments). An appropriate check is added for overflow
directly in the __ieee754_y1 implementation, similar to the check
present for yn (doing it there rather than in the wrapper also avoids
yn needing to repeat the check when called for order 1 or -1 and it
uses __ieee754_y1).
Tested x86_64 and x86; no ulps update needed. Also tested for mips64
to verify the ldbl-128 fix (the ldbl-128ibm code just #includes the
ldbl-128 file).
[BZ #17050]
* sysdeps/ieee754/dbl-64/e_j1.c: Include <errno.h>.
(__ieee754_y1): Set errno if return value overflows.
* sysdeps/ieee754/flt-32/e_j1f.c: Include <errno.h>.
(__ieee754_y1f): Set errno if return value overflows.
* sysdeps/ieee754/ldbl-128/e_j1l.c: Include <errno.h>.
(__ieee754_y1l): Set errno if return value overflows.
* sysdeps/ieee754/ldbl-96/e_j1l.c: Include <errno.h>.
(__ieee754_y1l): Set errno if return value overflows.
* math/auto-libm-test-in: Add more tests of y0, y1 and yn.
* math/auto-libm-test-out: Regenerated.
Errno is not set and the testcases will fail.
Now the scalbln-aliases are removed in i386/m68
and the wrappers are used when calling the scalbln-functions.
On ia64 only scalblnf has its own implementation.
For scalbln and scalblnl the ieee754/dbl-64 and ieee754/ldbl-96 are used, thus
the wrappers are needed, too.
As with other issues of this kind, bug 17042 is log2 (1) wrongly
returning -0 instead of +0 in round-downward mode because of
implementations effectively in terms of log1p (x - 1). This patch
fixes the issue in the same way used for log and log10.
Tested x86_64 and x86 and ulps updated accordingly. Also tested for
mips64 to confirm a fix was needed for ldbl-128 and to validate that
fix (also applied to ldbl-128ibm since that version of log2l is
essentially the same as the ldbl-128 one).
[BZ #17042]
* sysdeps/i386/fpu/e_log2.S (__ieee754_log2): Take absolete value
when x - 1 is zero.
* sysdeps/i386/fpu/e_log2f.S (__ieee754_log2f): Likewise.
* sysdeps/i386/fpu/e_log2l.S (__ieee754_log2l): Likewise.
* sysdeps/ieee754/ldbl-128/e_log2l.c (__ieee754_log2l): Return
0.0L for an argument of 1.0L.
* sysdeps/ieee754/ldbl-128ibm/e_log2l.c (__ieee754_log2l):
Likewise.
* sysdeps/x86_64/fpu/e_log2l.S (__ieee754_log2l): Take absolute
value when x - 1 is zero.
* math/libm-test.inc (log2_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
As with various other issues of this kind, bug 16977 is log10 (1)
wrongly returning -0 rather than +0 in round-downward mode because of
an implementation effectively in terms of log1p (x - 1). This patch
fixes the issue in the same way used for log.
Tested x86_64 and x86 and ulps updated accordingly. Also tested for
mips64 to confirm a fix was needed for ldbl-128 and to validate that
fix (also applied to ldbl-128ibm since that version of logl is
essentially the same as the ldbl-128 one).
[BZ #16977]
* sysdeps/i386/fpu/e_log10.S (__ieee754_log10): Take absolute
value when x - 1 is zero.
* sysdeps/i386/fpu/e_log10f.S (__ieee754_log10f): Likewise.
* sysdeps/i386/fpu/e_log10l.S (__ieee754_log10l): Likewise.
* sysdeps/ieee754/ldbl-128/e_log10l.c (__ieee754_log10l): Return
0.0L for an argument of 1.0L.
* sysdeps/ieee754/ldbl-128ibm/e_log10l.c (__ieee754_log10l):
Likewise.
* sysdeps/x86_64/fpu/e_log10l.S (__ieee754_log10l): Take absolute
value when x - 1 is zero.
* math/libm-test.inc (log10_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
Bug 16564 is spurious overflow of log1pl (LDBL_MAX) in FE_UPWARD mode,
resulting from log1pl adding 1 to its argument (for arguments not
close to 0), which overflows in that mode. This patch fixes this by
avoiding adding 1 to large arguments (precisely what counts as large
depends on the floating-point format).
Tested x86_64 and x86, and spot-checked log1pl tests on mips64 and
powerpc64.
[BZ #16564]
* sysdeps/i386/fpu/s_log1pl.S (__log1pl): Do not add 1 to positive
arguments with exponent 65 or above.
* sysdeps/ieee754/ldbl-128/s_log1pl.c (__log1pl): Do not add 1 to
arguments 0x1p113L or above.
* sysdeps/ieee754/ldbl-128ibm/s_log1pl.c (__log1pl): Do not add 1
to arguments 0x1p107L or above.
* sysdeps/x86_64/fpu/s_log1pl.S (__log1pl): Do not add 1 to
positive arguments with exponent 65 or above.
* math/auto-libm-test-in: Add more tests of log1p.
* math/auto-libm-test-out: Regenerated.
Bug 16516 reports spurious underflows from erf (for all floating-point
types), when the result is close to underflowing but does not actually
underflow.
erf (x) is about (2/sqrt(pi))*x for x close to 0, so there are
subnormal arguments for which it does not underflow. The various
implementations do (x + efx*x) (for efx = 2/sqrt(pi) - 1), for greater
accuracy than if just using a single multiplication by an
approximation to 2/sqrt(pi) (effectively, this way there are a few
more bits in the approximation to 2/sqrt(pi)). This can introduce
underflows when efx*x underflows even though the final result does
not, so a scaled calculation with 8*efx is done in these cases - but 8
is not a big enough scale factor to avoid all such underflows. 16 is
(any underflows with a scale factor of 16 would only occur when the
final result underflows), so this patch changes the code to use that
factor. Rather than recomputing all the values of the efx8 variable,
it is removed, leaving it to the compiler's constant folding to
compute 16*efx. As such scaling can also lose underflows when the
final scaling down happens to be exact, appropriate checks are added
to ensure underflow exceptions occur when required in such cases.
Tested x86_64 and x86; no ulps updates needed. Also spot-checked for
powerpc32 and mips64 to verify the changes to the ldbl-128ibm and
ldbl-128 implementations.
[BZ #16516]
* sysdeps/ieee754/dbl-64/s_erf.c (efx8): Remove variable.
(__erf): Scale by 16 instead of 8 in potentially underflowing
case. Ensure exception if result actually underflows.
* sysdeps/ieee754/flt-32/s_erff.c (efx8): Remove variable.
(__erff): Scale by 16 instead of 8 in potentially underflowing
case. Ensure exception if result actually underflows.
* sysdeps/ieee754/ldbl-128/s_erfl.c: Include <float.h>.
(efx8): Remove variable.
(__erfl): Scale by 16 instead of 8 in potentially underflowing
case. Ensure exception if result actually underflows.
* sysdeps/ieee754/ldbl-128ibm/s_erfl.c: Include <float.h>.
(efx8): Remove variable.
(__erfl): Scale by 16 instead of 8 in potentially underflowing
case. Ensure exception if result actually underflows.
* sysdeps/ieee754/ldbl-96/s_erfl.c: Include <float.h>.
(efx8): Remove variable.
(__erfl): Scale by 16 instead of 8 in potentially underflowing
case. Ensure exception if result actually underflows.
* math/auto-libm-test-in: Add more tests of erf.
* math/auto-libm-test-out: Regenerated.
According to ISO C Annex F, log (1) should be +0 in all rounding
modes, but some implementations in glibc wrongly return -0 in
round-downward mode (mapping to log1p (x - 1) is problematic because 1
- 1 is -0 in round-downward mode, and log1p (-0) is -0). This patch
fixes this. (It helps with some implementations of other functions
such as acosh, log2 and log10 that call out to log, but not enough to
enable all-rounding-modes testing for those functions without further
fixes to other implementations of them.)
Tested x86_64 and x86 and ulps updated accordingly, and did spot tests
for mips64 for the ldbl-128 fix, and i586 for the sysdeps/i386/fpu
implementations shadowed by those in sysdeps/i386/i686/fpu.
[BZ #16731]
* sysdeps/i386/fpu/e_log.S (__ieee754_log): Take absolute value
when x - 1 is zero.
* sysdeps/i386/fpu/e_logf.S (__ieee754_logf): Likewise.
* sysdeps/i386/fpu/e_logl.S (__ieee754_logl): Likewise.
* sysdeps/i386/i686/fpu/e_logl.S (__ieee754_logl): Likewise.
* sysdeps/ieee754/dbl-64/e_log.c (__ieee754_log): Return +0 when
argument is 1.
* sysdeps/ieee754/ldbl-128/e_logl.c (__ieee754_logl): Likewise.
* sysdeps/x86_64/fpu/e_logl.S: Take absolute value when x - 1 is
zero.
* math/libm-test.inc (log_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
ISO C requires the result of nextafter to be independent of the
rounding mode, even when underflow or overflow occurs. This patch
fixes the bug in various nextafter implementations that, having done
an overflowing computation to force an overflow exception (correct),
they then return the result of that computation rather than an
infinity computed some other way (incorrect, when the overflowing
result of arithmetic with that sign and rounding mode is finite but
the correct result is infinite) - generally by falling through to
existing code to return a value that in fact is correct for this case
(but was computed by an integer increment and so without generating
the exceptions required). Having fixed the bug, the previously
deferred conversion of nextafter testing in libm-test.inc to
ALL_RM_TEST is also included.
Tested x86_64 and x86; also spot-checked results of nextafter tests
for powerpc32 and mips64 to test the ldbl-128ibm and ldbl-128
changes. (The m68k change is untested.)
[BZ #16677]
* math/s_nextafter.c (__nextafter): Do not return value from
overflowing computation.
* sysdeps/i386/fpu/s_nextafterl.c (__nextafterl): Likewise.
* sysdeps/ieee754/flt-32/s_nextafterf.c (__nextafterf): Likewise.
* sysdeps/ieee754/ldbl-128/s_nextafterl.c (__nextafterl):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c (__nextafterl):
Likewise.
* sysdeps/m68k/m680x0/fpu/s_nextafterl.c (__nextafterl): Likewise.
* math/libm-test.inc (nextafter_test): Use ALL_RM_TEST.
This patch fixes bug 16400, spurious underflow exceptions for ldbl-128
/ ldbl-128ibm lgammal with small positive arguments, by just using
-__logl (x) as the result in the problem cases (similar to the
previous fix for problems with small negative arguments).
Tested powerpc32, and also tested on mips64 that this does not require
ulps regeneration for the ldbl-128 case.
* sysdeps/ieee754/ldbl-128/e_lgammal_r.c (__ieee754_lgammal_r):
Return -__logl (x) for small positive arguments without evaluating
a polynomial.
This patch fixes bug 16337, ldbl-128 lgammal spurious overflows for
small negative arguments (the arguments in question are already in the
testsuite). The implementation uses the reflection formula to compute
lgamma of negative x from lgamma of -x, effectively resulting in a
calculation -log(x^2) + log(-x); cancellation isn't problematic in
this case (bugs for problematic cancellation in lgamma are 2542, 2543,
2558), but the x^2 calculation can underflow (in which case there is
spurious logic to return an overflowing value - lgamma can only ever
correctly overflow for large positive arguments, though tgamma can
overflow for small arguments of either sign as well as large positive
arguments). The fix is simply to calculate the result directly with
logl when the argument is a small enough negative number.
Tested mips64.
* sysdeps/ieee754/ldbl-128/e_lgammal_r.c (__ieee754_lgammal_r):
Calculate results for small negative arguments directly rather
than using reflection formula with special underflow handling.
This patch fixes bug 16338, ldbl-128 logl not handling subnormals
(with consequent inaccuracy for lgammal as well). The fix is simply
to use __frexpl when determining the exponent, as done already in
log2l and log10l. Given the lack of testing of small arguments to any
of the log* functions, appropriate tests are added for all of them.
Tested x86_64 and x86 and ulps updated accordingly, and spot tests
also run for mips64 to confirm the ldbl-128 fix.
Note that while this fixes lgammal inaccuracy for small positive
arguments, I suspect that there will still be problems with spurious
underflows in that case.
* sysdeps/ieee754/ldbl-128/e_logl.c (__ieee754_logl): Use __frexpl
to determine exponent and adjust argument to have exponent of -1.
* math/auto-libm-test-in: Add more tests of log, log10, log1p and
log2.
* math/auto-libm-test-out: Regenerated.
* sysdeps/x86_64/fpu/libm-test-ulps: Update.
http://sourceware.org/ml/libc-alpha/2013-08/msg00081.html
This is the first of a series of patches to ban ieee854_long_double
and the ieee854_long_double macros when using IBM long double. union
ieee854_long_double just isn't correct for IBM long double, especially
when little-endian, and pretending it is OK has allowed a number of
bugs to remain undetected in sysdeps/ieee754/ldbl-128ibm/.
This changes the few places in generic code that use it.
* stdio-common/printf_size.c (__printf_size): Don't use
union ieee854_long_double in fpnum union.
* stdio-common/printf_fphex.c (__printf_fphex): Likewise. Use
signbit macro to retrieve sign from long double.
* stdio-common/printf_fp.c (___printf_fp): Use signbit macro to
retrieve sign from long double.
* sysdeps/ieee754/ldbl-128ibm/printf_fphex.c: Adjust for fpnum change.
* sysdeps/ieee754/ldbl-128/printf_fphex.c: Likewise.
* sysdeps/ieee754/ldbl-96/printf_fphex.c: Likewise.
* sysdeps/x86_64/fpu/printf_fphex.c: Likewise.
* math/test-misc.c (main): Don't use union ieee854_long_double.
ports/
* sysdeps/ia64/fpu/printf_fphex.c: Adjust for fpnum change.
With help from Joseph Myers.
* sysdeps/ieee754/ldbl-128/s_atanl.c (__atanl): Handle tiny and
very large arguments properly.
* math/libm-test.inc (atan_test): New tests.
(atan2_test): New tests.
* sysdeps/sparc/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Update.
With help from Joseph Myers.
* sysdeps/ieee754/flt-32/e_j0f.c (__ieee754_y0f): Adjust tinyness
cutoff to 2**-13.
* sysdeps/ieee754/flt-32/e_j1f.c (__ieee754_y1f): Adjust tinyness
cutoff to 2**-25.
* sysdeps/ieee754/ldbl-128/e_j0l.c (U0): New constant.
( __ieee754_y0l): Avoid arithmetic underflow when 'x' is very
small.
* sysdeps/ieee754/ldbl-128/e_j1l.c (__ieee754_y1l): Likewise.
* math/libm-test.inc (y0_test): New tests.
(y1_test): New tests.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Update.
* sysdeps/sparc/fpu/libm-test-ulps: Update.
POSIX 2008 states that if the input for 'logb[f|l]' is a subnormal number
it should be treated as if it were normalized. This means the
implementation should calculate the log2 of the mantissa and add it to the
subnormal exponent (-126 for float and -1022 for double and IBM long
double). This patch takes care of that.
[BZ# 6794]
* sysdeps/ieee754/ldbl-96/s_ilogbl.c: Moved to ...
* sysdeps/ieee754/ldbl-96/e_ilogbl.c: ... here.
Rename __ilogbl to __ieee754_ilogbl and remove weak_alias.
* sysdeps/ieee754/ldbl-128/s_ilogbl.c: Moved to ...
* sysdeps/ieee754/ldbl-128/e_ilogbl.c: ... here.
Rename __ilogbl to __ieee754_ilogbl and remove weak_alias.
* sysdeps/ieee754/ldbl-64-128/s_ilogbl.c: Moved to ...
* sysdeps/ieee754/ldbl-64-128/e_ilogbl.c: ... here.
* sysdeps/sparc/sparc64/soft-fp/s_ilogbl.c: Moved to ...
* sysdeps/sparc/sparc64/soft-fp/e_ilogbl.c: ... here.
Rename __ilogbl to __ieee754_ilogbl and remove weak_alias.
* sysdeps/ieee754/ldbl-128/s_nearbyintl.c (__nearbyintl): Do not
manipulate bits before adding and subtracting TWO112[sx].
* sysdeps/ieee754/ldbl-128/s_rintl.c (__rintl): Likewise.
(__ieee754_y0l): Likewise.
* sysdeps/ieee754/ldbl-128/e_j1l.c (__ieee754_j1l): Likewise.
(__ieee754_y1l): Likewise.
* sysdeps/ieee754/ldbl-128/s_expm1l.c (__expm1l): Use __ldexpl.
* sysdeps/ieee754/ldbl-128/s_log1pl.c: Kill bogus prototypes for
frexpl and ldexpl. math_private.h provides them and the latter
is not even used.
(__log1pl): Use __frexpl.
__fe_nomask_env.
* sysdeps/powerpc/fpu/fe_nomask.c: Add libm_hidden_def.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/fe_nomask.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/fpu/fe_nomask.c: Likewise.
* sysdeps/powerpc/bits/fenv.h: Make safe for C++.
* sysdeps/unix/sysv/linux/powerpc/bits/mathinline.h: New file.
* sysdeps/powerpc/fpu/fegetexcept.c (__fegetexcept): Rename
function from fegetexcept and make old name weak alias.
* include/fenv.h: Declare __fegetexcept.
* sysdeps/powerpc/fpu/fedisblxcpt.c: Use __fegetexcept instead of
fegetexcept.
* sysdeps/powerpc/fpu/feenablxcpt.c: Likewise.
* sysdeps/powerpc/fpu/fraiseexcpt.c (__feraiseexcept): Avoid call
to fetestexcept.
* sysdeps/ieee754/ldbl-128ibm/s_log1pl.c (__log1pl): Use __frexpl
instead of frexpl to avoid local PLT.
* math/s_significandl.c (__significandl): Use __ilogbl instead of
ilogbl to avoid local PLT.
* sysdeps/ieee754/ldbl-128ibm/s_expm1l.c (__expm1l): Use __ldexpl
instead of ldexpl to avoid local PLT.
* sysdeps/ieee754/ldbl-128ibm/e_expl.c (__ieee754_expl): Use
__roundl not roundl to avoid local PLT.
* sysdeps/ieee754/ldbl-128/e_j0l.c: Use function names which avoid
local PLTs. Use __sincosl instead of separate sinl and cosl
calls.
* sysdeps/ieee754/ldbl-128/e_j1l.c: Likewise.
2008-02-12 Pete Eberlein <eberlein@us.ibm.com>
[BZ #4407]
* sysdeps/ieee754/ldbl-128/e_lgammal_r.c (__ieee754_lgammal_r):
Preserve sign in signgamp when x is zero.
2007-03-27 Jakub Jelinek <jakub@redhat.com>
[BZ #3306]
* math/math_private.h (math_opt_barrier, math_force_eval): Define.
* sysdeps/i386/fpu/math_private.h: New file.
* sysdeps/x86_64/fpu/math_private.h: New file.
* math/s_nexttowardf.c (__nexttowardf): Use math_opt_barrier and
math_force_eval macros. Use "+m" constraint on asm rather than
"=m" and "m".
* math/s_nextafter.c (__nextafter): Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_nexttoward.c (__nexttoward):
Likewise.
* sysdeps/ieee754/flt-32/s_nextafterf.c (__nextafterf): Likewise.
* sysdeps/ieee754/ldbl-128/s_nexttoward.c (__nexttoward): Likewise.
* sysdeps/ieee754/ldbl-96/s_nexttoward.c (__nexttoward): Likewise.
* sysdeps/i386/fpu/s_nextafterl.c (__nextafterl): Use
math_opt_barrier and math_force_eval macros.
* sysdeps/ieee754/ldbl-128/s_nextafterl.c (__nextafterl): Likewise.
* sysdeps/ieee754/ldbl-96/s_nextafterl.c (__nextafterl): Likewise.
* sysdeps/i386/fpu/s_nexttoward.c: Include float.h.
(__nexttoward): Use math_opt_barrier and
math_force_eval macros. Use "+m" constraint on asm rather than
"=m" and "m". Only use asm to force double result if
FLT_EVAL_METHOD is 2.
* sysdeps/i386/fpu/s_nexttowardf.c: Include float.h.
(__nexttowardf): Use math_opt_barrier and
math_force_eval macros. Use "+m" constraint on asm rather than
"=m" and "m". Only use asm to force double result if
FLT_EVAL_METHOD is not 0.
* sysdeps/ieee754/ldbl-128ibm/s_nexttowardf.c: Include float.h.
(__nexttowardf): Use math_opt_barrier and
math_force_eval macros. If FLT_EVAL_METHOD is not 0, force
x to float using asm.
* sysdeps/ieee754/ldbl-opt/s_nexttowardfd.c: Include float.h.
(__nldbl_nexttowardf): Use math_opt_barrier and
math_force_eval macros. If FLT_EVAL_METHOD is not 0, force
x to float using asm.
* sysdeps/ieee754/ldbl-96/s_nexttowardf.c: Include float.h.
(__nexttowardf): Use math_opt_barrier and math_force_eval
macros. If FLT_EVAL_METHOD is not 0, force x to float using asm.
* math/bug-nextafter.c (zero, inf): New variables.
(main): Add new tests.
* math/bug-nexttoward.c (zero, inf): New variables.
(main): Add new tests.
2006-09-25 Jakub Jelinek <jakub@redhat.com>
[BZ #3252]
* sysdeps/unix/sysv/linux/powerpc/fchownat.c (fchownat): Handle only
fchownat syscall and __ASSUME_LCHOWN_SYSCALL case inline, call
__{,l}chown to handle the rest.
* sysdeps/unix/sysv/linux/i386/fchownat.c (fchownat): Handle only
fchownat syscall and __ASSUME_32BITUIDS case inline, call
__{,l}chown to handle the rest.
* sysdeps/unix/sysv/linux/sparc/sparc32/fchownat.c: Include
i386/fchownat.c.
* sysdeps/unix/sysv/linux/s390/s390-32/fchownat.c: Likewise.
* sysdeps/unix/sysv/linux/sh/fchownat.c: Likewise.
[BZ #3253]
* posix/glob.c (glob_in_dir): Don't alloca one struct globlink at a
time, rather allocate increasingly bigger arrays of pointers, if
possible with alloca, if too large with malloc.
2006-09-24 Jakub Jelinek <jakub@redhat.com>
* sysdeps/powerpc/fpu/libm-test-ulps: Updated.
* sysdeps/ieee754/ldbl-128/s_lrintl.c (__lrintl): Fix 2 typos.
2006-06-17 Joseph S. Myers <joseph@codesourcery.com>
[BZ #2592]
* math/libm-test.inc (lrint_test_tonearest): New function.
(lrint_test_towardzero): New function.
(lrint_test_downward): New function.
(lrint_test_upward): New function.
(main): Run these new tests.
* sysdeps/ieee754/dbl-64/s_llrint.c (__llrint): Correct rounding
of values near to 0.
(two52): Use double not long double.
* sysdeps/ieee754/dbl-64/s_lrint.c (__lrint): Likewise.
* sysdeps/ieee754/flt-32/s_llrintf.c (__llrintf): Likewise.
(two23): Use float not double.
* sysdeps/ieee754/flt-32/s_lrintf.c (__lrintf): Likewise.
(two23): Use float not double.
* sysdeps/ieee754/ldbl-128/s_llrintl.c (__llrintl): Likewise.
* sysdeps/ieee754/ldbl-128/s_lrintl.c (__lrintl): Likewise.
* sysdeps/ieee754/ldbl-96/s_llrintl.c (__llrintl): Likewise.
* sysdeps/ieee754/ldbl-96/s_lrintl.c (__lrintl): Likewise.
Jakub Jelinek <jakub@redhat.com>
Roland McGrath <roland@redhat.com>
Steven Munroe <sjmunroe@us.ibm.com>
Alan Modra <amodra@bigpond.net.au>
* sysdeps/powerpc/powerpc64/fpu/s_truncf.S: Comment fix.
* sysdeps/powerpc/powerpc32/fpu/s_truncf.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_llroundf.S: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Update.
* math/libm-test.inc (check_float_internal): Allow ulp <= 0.5.
(erfc_test): Don't run erfcl (27.0L) test if erfcl (27.0L) is
denormal.
[TEST_LDOUBLE] (ceil_test, floor_test, llrint_test, llround_test,
rint_test, round_test, trunc_test): Add new tests.
* sysdeps/powerpc/powerpc32/fpu/s_copysignl.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_fabs.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_fabsl.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_fdim.c: New file.
* sysdeps/powerpc/powerpc32/fpu/s_fmax.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_fmin.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_isnan.c: New file.
* sysdeps/powerpc/powerpc64/fpu/s_ceill.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_copysignl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_fabs.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_fabsl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_fdim.c: New file.
* sysdeps/powerpc/powerpc64/fpu/s_floorl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_fmax.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_fmin.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_isnan.c: New file.
* sysdeps/powerpc/powerpc64/fpu/s_llrintl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_llroundl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_lrintl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_lroundl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_nearbyintl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_rintl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_roundl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_truncl.S: New file.
* sysdeps/unix/sysv/linux/powerpc/Implies: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/fpu/Implies: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/Implies: New file.
* sysdeps/unix/sysv/linux/powerpc/configure.in: New file.
* sysdeps/unix/sysv/linux/powerpc/configure: New file.
* sysdeps/unix/sysv/linux/powerpc/bits/wordsize.h
(__LONG_DOUBLE_MATH_OPTIONAL): Define.
(__NO_LONG_DOUBLE_MATH): Define.
* sysdeps/unix/sysv/linux/powerpc/nldbl-abi.h: New file.
* sysdeps/powerpc/fpu/s_isnan.c: Include math_ldbl_opt.h.
* sysdeps/powerpc/powerpc64/fpu/s_ceil.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (ceill): Add compatibility symbols.
* sysdeps/powerpc/powerpc64/fpu/s_copysign.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (copysignl): Add compatibility symbols.
* sysdeps/powerpc/powerpc64/fpu/s_floor.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (floorl): Add compatibility symbols.
* sysdeps/powerpc/powerpc64/fpu/s_llrint.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (llrintl, lrintl): Add compatibility symbols.
* sysdeps/powerpc/powerpc64/fpu/s_llround.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (llroundl, lroundl): Add compatibility symbols.
* sysdeps/powerpc/powerpc64/fpu/s_rint.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (rintl): Add compatibility symbols.
* sysdeps/powerpc/powerpc64/fpu/s_round.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (roundl): Add compatibility symbols.
* sysdeps/powerpc/powerpc64/fpu/s_trunc.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (truncl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_ceil.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (ceill): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_copysign.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (copysignl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_floor.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (floorl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_lrint.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (lrintl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_llrint.c: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (llrintl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_lround.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (lroundl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_rint.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (rintl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_round.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (roundl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_trunc.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (truncl): Add compatibility symbols.
* misc/qefgcvt_r.c [LDBL_MIN_10_EXP == -291] (FLOAT_MIN_10_NORM): New.
* sysdeps/powerpc/fpu/bits/mathdef.h (__NO_LONG_DOUBLE_MATH): Remove.
* sysdeps/powerpc/Implies: Add ieee754/ldbl-128ibm.
* sysdeps/powerpc/powerpc32/Implies: Remove powerpc/soft-fp.
* sysdeps/ieee754/ldbl-128ibm/Makefile: New file.
* sysdeps/ieee754/ldbl-128ibm/e_acoshl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_acosl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_asinl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_atan2l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_atanhl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_coshl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_expl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_fmodl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_hypotl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_j0l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_j1l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_jnl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_lgammal_r.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_log10l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_log2l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_logl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_powl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_rem_pio2l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_remainderl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_sinhl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_sqrtl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/ieee754.h: New file.
* sysdeps/ieee754/ldbl-128ibm/k_cosl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/k_sincosl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/k_sinl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/k_tanl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/ldbl2mpn.c: New file.
* sysdeps/ieee754/ldbl-128ibm/math_ldbl.h: New file.
* sysdeps/ieee754/ldbl-128ibm/mpn2ldbl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/printf_fphex.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_asinhl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_atanl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_cbrtl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_cosl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_erfl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_expm1l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_fabsl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_finitel.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_fpclassifyl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_frexpl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_ilogbl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_isinfl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_isnanl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_log1pl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_logbl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_modfl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_nexttoward.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_nexttowardf.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_remquol.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_rintl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_scalblnl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_scalbnl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_signbitl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_sincosl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_sinl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_tanhl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_tanl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_truncl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/strtold_l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/t_sincosl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/w_expl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_copysignl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_floorl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_llrintl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_llroundl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_roundl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_ceill.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_nearbyintl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_lrintl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_lroundl.c: New file.
* sysdeps/ieee754/ldbl-128/e_powl.c: Fix old comment.
2004-12-16 Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/sparc/sparc32/clone.S (__clone): Add support
for NPTL where the PID is stored at userlevel and needs to be reset
when CLONE_THREAD is not used.
* sysdeps/unix/sysv/linux/sparc/sparc64/sysdep.h
(SYSCALL_ERROR_HANDLER): If RTLD_PRIVATE_ERRNO, use rtld_errno
instead of errno.
* sysdeps/unix/sysv/linux/sparc/sparc64/socket.S: Include
sysdep-cancel.h instead of sysdep.h. Handle cancellation.
* sysdeps/sparc/sparc64/fpu/libm-test-ulps: Regenerate.
* sysdeps/ieee754/ldbl-128/e_expl.c: Include stdlib.h.
2004-04-21 Jakub Jelinek <jakub@redhat.com>
* posix/tst-chmod.c (do_test): Fix a typo.
* elf/lateglobal.c (main): Fix error checks.
Patch by Stephen Clarke <stephen.clarke@st.com>.
* manual/ctype.texi (isblank, iswblank): Mark as ISO functions,
mention they have been added in ISO C99.
Reported by Ben Pfaff <blp@cs.stanford.edu>.
2004-03-31 H.J. Lu <hongjiu.lu@intel.com>
* sysdeps/ieee754/ldbl-128/bits/huge_vall.h: Fix typo.
2004-03-14 Ulrich Drepper <drepper@redhat.com>
Make the non-_l functions wrappers around the _l functions.
* include/monetary.h: Declare __vstrmon_l.
* include/string.h: Add libc_hidden_proto for __strcoll_l and
__strxfrm_l.
* include/time.h: Define ptime_locale_status. Declare
__strptime_internal.
* include/wchar.h: Add libc_hidden_proto for __wcscoll_l and
__wcsxfrm_l.
* stdlib/strfmon.c: Move the code to strfmon_l.c. Add little
wrapper around __vstrfmon_l.
* stdlib/strfmon_l.c: Add real implementation. Split into new
function __vstrfmon_l to allow calling it from strfmon.
* stdlib/strtod.c: Move real code to strtod_l.c and add wrapper.
* stdlib/strtod_l.c: Add real implementation.
* stdlib/strtof.c: Adjust to changed strtod.c.
* stdlib/strtof_l.c: Include strtod_l.c now.
* stdlib/strtold.c: New file.
* stdlib/strtold_l.c: Removed.
* string/strcoll.c: Move real code to strcoll_l.c: Add wrapper.
* string/strcoll_l.c: Add real implementation.
* string/strxfrm.c: Move real code to strxfrm_l.c: Add wrapper.
* string/strxfrm_l.c: Add real implementation.
* sysdeps/generic/strtol.c: Move real implementation to strtol_l.c.
Add wrappers.
* sysdeps/generic/strtol_l.c: Add real implementation.
* sysdeps/generic/strtold.c: Removed.
* sysdeps/generic/strtold_l.c: New file.
* sysdeps/generic/strtoll_l.c: Include strtol_l.c now. Adjust
#defines.
* sysdeps/generic/strtoul_l.c: Likewise.
* sysdeps/generic/strtoull_l.c: Likewise.
* sysdeps/generic/wcstol_l.c: Likewise.
* sysdeps/generic/wcstoll_l.c: Likewise.
* sysdeps/generic/wcstoul_l.c: Likewise.
* sysdeps/generic/wcstoull_l.c: Likewise.
* sysdeps/ieee754/ldbl-128/strtold.c: Removed.
* sysdeps/ieee754/ldbl-128/strtold_l.c: New file.
* sysdeps/ieee754/ldbl-96/strtold.c: Removed.
* sysdeps/ieee754/ldbl-96/strtold_l.c: New file.
* sysdeps/m68k/strtold.c: Removed.
* sysdeps/m68k/strtold_l.c: New file.
* time/strftime.c: Move real code to strftime_l.c. Add wrapper.
* time/strftime_l.c: Add real implementation.
* time/strptime.c: Move real code to strptime_l.c. Add wrapper.
* time/strptime_l.c: Add real implementation.
* time/wcsftime.c: Simplify since only wrappers are defined in
strftime.c.
* time/wcsftime_l.c: Include strftime_l.c.
* wcsmbs/wcscoll.c: Simplify since the file is not used by wcscoll_l.c
anymore.
* wcsmbs/wcscoll_l.c: Include strcoll_l.c.
* wcsmbs/wcsxfrm.c: Simplify since the file is not used by wcsxfrm_l.c
anymore.
* wcsmbs/wcsxfrm_l.c: Include strxfrm_l.c.
* wcsmbs/wcstod.c: Prepare to include new strtod.c.
* wcsmbs/wcstod_l.c: Include strtod_l.c.
* wcsmbs/wcstof.c: Prepare to include new strtof.c.
* wcsmbs/wcstof_l.c: Include strtof_l.c.
* wcsmbs/wcstold.c: Prepare to include new strtold.c.
* wcsmbs/wcstold_l.c: Include strtold_l.c.
* locale/uselocale.c: Use _NL_CURRENT_LOCALE instead of __libc_tsd_get.
* sysdeps/generic/strcasecmp.c: Optimize a bit. It's better to get
a reference to the current locale and then use the _l functions.
* sysdeps/generic/strncase.c: Likewise.
2004-02-12 Jakub Jelinek <jakub@redhat.com>
* math/libm-test.inc (lrint_test): Add new test.
(llrint_test, lround_test, llround_test): Likewise.
* sysdeps/ieee754/ldbl-128/s_lroundl.c (__lroundl): Fix special case
with result taking up 48 bits.
* sysdeps/ieee754/ldbl-128/s_lrintl.c (__lrintl): Likewise.
* sysdeps/ieee754/ldbl-128/s_llroundl.c (__llroundl): Likewise.
* sysdeps/ieee754/ldbl-96/s_llrintl.c (__llrintl): Fix special case
with result taking up 31 bits.
* sysdeps/mach/hurd/chown.c: Use INTDEF for __chown.
* sysdeps/unix/sysv/aix/chown.c: Likewise.
* sysdeps/unix/grantpt.c: Use INTUSE for __chown calls.
* sysdeps/unix/sysv/linux/m68k/chown.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/chown.c: Likewise.
* sysdeps/unix/sysv/linux/i386/chown.c: Use INTDEF2 to define
__chown_internal.
* sysdeps/unix/sysv/linux/s390/s390-32//chown.c: Likewise.
* intl/dcngettext.c [_LIBC]: Use INTUSE for __dcngettext.
* intl/dngettext.c [_LIBC] (DCNGETTEXT): Use INTUSE.
* intl/ngettext.c: Likewise.
* include/sys/socket.h: Declare __connect_internal and define
__connect macro if not NOT_IN_libc.
* sysdeps/mach/hurd/connect.c: Use INTDEF for __connect.
* sysdeps/unix/sysv/aix/connect.c: Likewise.
* sysdeps/unix/sysv/linux/connect.S: Add __connect_internal alias.
* include/unistd.h: Declare __close_internal and define __close macro
if not NOT_IN_libc.
* libio/libioP.h (JUMO0, JUMP1, JUMP2, JUMP3, WJUMP0, WJUMP1, WJUMP2,
WJUMP3): Add extra parenthesis to avoid expanding element names with
macors like __close.
* sysdeps/unix/syscalls.list: Add __close_internal alias.
* include/unistd.h: Declare __dup2_internal and define __dup2 macro
if not NOT_IN_libc.
* sysdeps/mach/hurd/dup2.c: Use INTDEF for __dup2.
* sysdeps/posix/dup2.c: Use INTDEF for __dup2.
* sysdeps/unix/syscalls.list: Add __dup2_internal alias.
* include/unistd.h: Declare __fork_internal and define __fork macro
if not NOT_IN_libc.
* sysdeps/mach/hurd/fork.c: Use INTDEF for __fork.
* sysdeps/unix/sysv/aix/fork.c: Likewise.
* sysdeps/unix/sysv/linux/syscalls.list: Add __fork_internal alias.
* include/stdio_ext.h: Declare __fsetlocking_internal and define
__fsetlocking macro to use it if not NOT_IN_libc.
* libio/__fsetlocking.c: Use INTDEF for __fsetlocking.
* libio/__fbufsize.c: Correct copyright.
* libio/__flbf.c: Likewise.
* libio/__fpending.c: Likewise.
* libio/__fpurge.c: Likewise.
* libio/__freadable.c: Likewise.
* libio/__freading.c: Likewise.
* libio/__fsetlocking.c: Likewise.
* libio/__fwritable.c: Likewise.
* libio/__fwriting.c: Likewise.
* include/stdio.h: Declare __asprintf_internal and define __asprintf
macro to use it if not NOT_IN_libc.
* stdio-common/asprintf.c: Use INTDEF for __asprintf.
* include/mntent.h: Declare __setmntent_internal,
__getmntent_r_internal, __endmntent_internal. Define __setmntent,
__getmntent_r, and __endmntent macros to use these functions if not
NOT_IN_libc.
* misc/mntent_r.c: Use INTDEF for __setmntent, __getmntent_r, and
__endmntent.
* include/math.h: Declare __finite_internal, __finitef_internal, and
__finitel_internal. Redefine isfinite macro if in libc or libm using
these functions.
* sysdeps/generic/s_ldexp.c: Use INTUSE for __finite calls.
* sysdeps/generic/s_ldexpf.c: Use INTUSE for __finitef calls.
* sysdeps/generic/s_ldexpl.c: Use INTUSE for __finitel calls.
* sysdeps/i386/fpu/s_finite.S: Define _internal alias.
* sysdeps/i386/fpu/s_finitef.S: Likewise.
* sysdeps/i386/fpu/s_finitel.S: Likewise.
* sysdeps/ieee754/dbl-64/s_finite.c: Likewise.
* sysdeps/ieee754/flt-32/s_finitef.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_finitel.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_finitel.c: Likewise.
* include/fcntl.h: Declare __fcntl_internal. Define __fcntl macro
to use this function if not NOT_IN_libc.
* libio/iofdopen.c (_IO_fcntl): Use INTUSE.
* sysdeps/generic/fcntl.c: Use INTDEF for __fcntl.
* sysdeps/mach/hurd/fcntl.c: Likewise.
* sysdeps/unix/sysv/aix/fcntl.c: Likewise.
* sysdeps/unix/sysv/linux/i386/fcntl.c: Likewise.
* include/argz.h: Declare __argz_count_internal and
__argz_stringify_internal.
* intl/l10nflist.c [_LIBC]: Use INTUSE for __argz_count and
__argz_stringify.
* string/argz-count.c: Use INTDEF for __argz_count.
* string/argz-stringify.c: Use INTDEF for __argz_stringify.
* include/stdlib.h: Declare __cxa_atexit_internal and define
__cxa_atexit macro if not NOT_IN_libc.
* stdlib/cxa_atexit.c: Use INTDEF for __cxa_atexit.
* dlfcn/Makefile: Define NOT_IN_libc when compiling modcxaatexit.c.
* assert/assert.c: Use INTDEF for __assert_fail.
* assert/__assert.c: Use INTUSE for call to __assert_fail.
* include/assert.h: Declare __assert_fail_internal.
2001-11-10 Andreas Jaeger <aj@suse.de>
* sysdeps/ieee754/ldbl-128/e_log2l.c: New file.
* sysdeps/ieee754/ldbl-128/e_log10l.c: Likewise.
Contributed by Stephen L Moshier <moshier@mediaone.net>.
2001-09-29 Jes Sorensen <jes@trained-monkey.org>
* sysdeps/unix/sysv/linux/ia64/bits/sigcontext.h (struct sigcontext):
Add sc_loadrs and sc_rbs_bas to match current kernel.
2001-09-27 Jakub Jelinek <jakub@redhat.com>
* sysdeps/sparc/sparc64/fpu/libm-test-ulps: Update.
* sysdeps/ieee754/ldbl-128/s_erfl.c (__erfcl): Fix erfc(-inf).
2001-09-27 Jakub Jelinek <jakub@redhat.com>
* elf/dl-open.c (dl_open_worker): If l_opencount of freshly loaded
object has been bumped because of relocation dependency, avoid
duplicates in l_scope.
(show_scope): Fix typos.
* elf/Makefile: Add rules to build and run reldep6.
* elf/reldep6.c: New file.
* elf/reldep6mod0.c: New file.
* elf/reldep6mod1.c: New file.
* elf/reldep6mod2.c: New file.
* elf/reldep6mod3.c: New file.
* elf/reldep6mod4.c: New file.
2001-09-26 Jakub Jelinek <jakub@redhat.com>
* sysdeps/sparc/sparc64/dl-machine.h (elf_machine_fixup_plt): Call
sparc64_fixup_plt.
(sparc64_fixup_plt): Moved from elf_machine_fixup_plt. Optimize
near jumps and 0xfffff800XXXXXXXX target addresses, no thread safety
for non-lazy binding. Fix .plt[32768+] handling.
(elf_machine_plt_value): Don't add addend.
(elf_machine_rela): Call sparc64_fixup_plt instead of
elf_machine_fixup_plt.
(elf_machine_runtime_setup, TRAMPOLINE_TEMPLATE): Optimize for
dynamic linker at 0xfffff800XXXXXXXX.
* sysdeps/sparc/sparc32/fpu/libm-test-ulps: Update.
* math/libm-test.inc (j0_test): Add extra tests.
* sysdeps/ieee754/ldbl-128/e_j0l.c (__ieee754_j0l): Use |x|,
not x, in Hankel approximation.
Patches by Stephen L Moshier.
2001-07-23 Stephen L Moshier <moshier@mediaone.net>
* sysdeps/ieee754/ldbl-128/s_log1pl.c (__log1pl): Return proper
sign for 0 input and set divide by zero exception for -1 input.
Return argument if NaN or infinity.
2001-07-23 Stephen L Moshier <moshier@mediaone.net>
* sysdeps/ieee754/ldbl-128/s_expm1l.c (__expm1l): Return proper
sign for 0 input. Return NaN with no exception for NaN input.
2001-07-10 Stephen L Moshier <moshier@mediaone.net>
* sysdeps/ieee754/ldbl-128/e_acosl.c (__ieee754_acosl): Fix
backwards conditional in test for x == 1.0.
2001-07-06 Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/i386/sigaction.c (RESTORE2): Put asm
explicitly into .text section.
2001-04-16 Jes Sorensen <jes@linuxcare.com>
* sysdeps/unix/sysv/linux/ia64/bits/sigcontext.h (struct sigcontext):
Add 16 longwords reserved for future use to match changes in the
kernel.
2001-07-03 Jes Sorensen <jes@trained-monkey.org>
* sysdeps/ia64/strncpy.S: Call strnlen() when determining the
string length rather than strlen(). Solves the performance problem
of doing strlen on a 5MB string when strncpy was called with a
length argument of 5 bytes.
2001-07-02 Jakub Jelinek <jakub@redhat.com>
* sysdeps/sparc/sparc32/dl-machine.h (elf_machine_rela): Handle
R_SPARC_UA16 and R_SPARC_UA32.
* sysdeps/sparc/sparc64/dl-machine.h (elf_machine_rela): Likewise.
2001-07-01 Stephen L Moshier <moshier@mediaone.net>
* sysdeps/ieee754/ldbl-96/e_acoshl.c (__ieee754_acoshl):
acosh(x) = ln(2x) if x > 2^30.
* sysdeps/ieee754/ldbl-128/e_acoshl.c (__ieee754_acoshl):
acosh(x) = ln(2x) if x > 2^54.
* sysdeps/hppa/dl-machine.h (elf_machine_rela): Handle relocs
2001-07-06 Paul Eggert <eggert@twinsun.com>
* manual/argp.texi: Remove ignored LGPL copyright notice; it's
not appropriate for documentation anyway.
* manual/libc-texinfo.sh: "Library General Public License" ->
"Lesser General Public License".
2001-07-06 Andreas Jaeger <aj@suse.de>
* All files under GPL/LGPL version 2: Place under LGPL version
2.1.
2001-06-11 Andreas Jaeger <aj@suse.de>
* sysdeps/ieee754/ldbl-128/e_coshl.c: New file. Contributed by
Stephen L Moshier <moshier@mediaone.net>.
* aclocal.m4: Quote AC_FD_MSG and AC_FD_CC.
* sysdeps/powerpc/fpu/libm-test-ulps: Add ULPs for tanh (-0.7).
* sysdeps/s390/fpu/libm-test-ulps: Likewise.
2001-06-11 Michael Deutschmann <michael@talamasca.ocis.net>
* rt/tst-aio4.c (do_test): Test whether rt signals are supported.
Use my_signo instead of MY_SIGNO and initialize it so that the
used signal is always available.
2001-06-11 Andreas Jaeger <aj@suse.de>,
Michael Deutschmann <michael@talamasca.ocis.net>
* io/test-lfs.c (do_prepare): Clean up error messages.
(test_ftello): Check for EFBIG and ENOSP, clean up error messages.
(do_test): Likewise.
2001-06-11 Andreas Jaeger <aj@suse.de>
* sysdeps/unix/sysv/linux/powerpc/bits/termios.h (IXANY, IUCLC,
IMAXBEL): Make always visible since they're needed by POSIX.
Closes PR libc/2320, reported by Chris Yeoh <cyeoh@samba.org>.
2001-06-10 Ben Collins <bcollins@debian.org>
* sysdeps/arm/elf/start.S: Use #function, not @function, for
.type of _start.
* sysdeps/ieee754/ldbl-128/s_ilogbl.c: Include limits.h to get
INT_MAX.
2001-06-07 H.J. Lu <hjl@gnu.org>
* sunrpc/rpc/rpc.h: Add __BEGIN_DECLS/__END_DECLS.
2001-06-04 Bruno Haible <haible@clisp.cons.org>
* iconv/loop.c (UNICODE_TAG_HANDLER): New macro.
* iconv/gconv_simple.c (__gconv_transform_internal_ascii): Invoke
UNICODE_TAG_HANDLER.
(__gconv_transform_internal_ucs2): Likewise.
(__gconv_transform_internal_ucs2reverse): Likewise.
* iconvdata/8bit-gap.c (BODY for TO_LOOP): Invoke UNICODE_TAG_HANDLER.
* iconvdata/8bit-generic.c (BODY for TO_LOOP): Likewise.
* iconvdata/ansi_x3.110.c (BODY for TO_LOOP): Likewise.
* iconvdata/big5.c (BODY for TO_LOOP): Likewise.
* iconvdata/big5hkscs.c (BODY for TO_LOOP): Likewise.
* iconvdata/cp1255.c (BODY for TO_LOOP): Likewise.
* iconvdata/cp1258.c (BODY for TO_LOOP): Likewise.
* iconvdata/euc-cn.c (BODY for TO_LOOP): Likewise.
* iconvdata/euc-jp.c (BODY for TO_LOOP): Likewise.
* iconvdata/euc-kr.c (BODY for TO_LOOP): Likewise.
* iconvdata/euc-tw.c (BODY for TO_LOOP): Likewise.
* iconvdata/gbk.c (BODY for TO_LOOP): Likewise.
* iconvdata/ibm930.c (BODY for TO_LOOP): Likewise.
* iconvdata/ibm932.c (BODY for TO_LOOP): Likewise.
* iconvdata/ibm933.c (BODY for TO_LOOP): Likewise.
* iconvdata/ibm935.c (BODY for TO_LOOP): Likewise.
* iconvdata/ibm937.c (BODY for TO_LOOP): Likewise.
* iconvdata/ibm939.c (BODY for TO_LOOP): Likewise.
* iconvdata/ibm943.c (BODY for TO_LOOP): Likewise.
* iconvdata/iso646.c (BODY for TO_LOOP): Likewise.
* iconvdata/iso8859-1.c (BODY for TO_LOOP): Likewise.
* iconvdata/iso_6937.c (BODY for TO_LOOP): Likewise.
* iconvdata/iso_6937-2.c (BODY for TO_LOOP): Likewise.
* iconvdata/iso-2022-cn.c (BODY for TO_LOOP): Likewise.
* iconvdata/iso-2022-cn-ext.c (BODY for TO_LOOP): Likewise.
* iconvdata/iso-2022-kr.c (BODY for TO_LOOP): Likewise.
* iconvdata/johab.c (BODY for TO_LOOP): Likewise.
* iconvdata/sjis.c (BODY for TO_LOOP): Likewise.
* iconvdata/t.61.c (BODY for TO_LOOP): Likewise.
* iconvdata/uhc.c (BODY for TO_LOOP): Likewise.
* iconvdata/unicode.c (BODY for TO_LOOP): Likewise.
* iconvdata/iso-2022-jp.c (TAG_none, TAG_language, TAG_language_j,
TAG_language_ja, TAG_language_k, TAG_language_ko, TAG_language_z,
TAG_language_zh, CURRENT_TAG_MASK): New enum values.
(EMIT_SHIFT_TO_INIT): Don't emit an escape sequence if ASCII_set
is already selected but set2 or tag are set.
(conversion): New enum type.
(cvlist_t): New type.
(CVLIST, CVLIST_FIRST, CVLIST_REST): New macros.
(conversion_lists): New array.
(BODY for TO_LOOP): Keep track of Unicode 3.1 language tag. If "ja",
prefer conversion to Japanese character sets. If "zh", prefer
conversion to GB2312. If "ko", prefer conversion to KSC5601. Small
optimizations.
(INIT_PARAMS): Add tag.
(UPDATE_PARAMS): Add tag.
2001-06-04 Bruno Haible <haible@clisp.cons.org>
* locale/programs/locfile.c (write_locale_data): Before creat(),
unlink the file, to avoid crashing the processes that mmap it. Change
a double slash to a single slash. Free fname in case of error return.
2001-06-02 Jakub Jelinek <jakub@redhat.com>
* sysdeps/i386/fpu/s_frexpl.S (__frexpl): Mostly revert 2000-12-03
changes, do the special handling for denormal numbers, not for
normalized numbers (patch by <trevin@xmission.com>).
* math/test-misc.c (main): Test frexpl with denormal arguments.
2001-06-04 Jakub Jelinek <jakub@redhat.com>
* math/libm-test.inc (llround_test): Add two new llround tests.
* sysdeps/ieee754/ldbl-96/s_llroundl.c (__llroundl): Don't allow
overflow when rounding away from zero.
2001-06-04 Jakub Jelinek <jakub@redhat.com>
* math/Makefile (libm-calls): Add e_log2, w_log2, remove s_log2.
* math/math_private.h (__ieee754_log2, __ieee754_log2f,
__ieee754_log2l): New prototypes.
* sysdeps/generic/w_log2.c: New file.
* sysdeps/generic/w_log2f.c: New file.
* sysdeps/generic/w_log2l.c: New file.
* sysdeps/generic/s_log2l.c: Move...
* sysdeps/generic/e_log2l.c: ...to here. Rename to __ieee754_log2l.
* sysdeps/ieee754/k_standard.c (__kernel_standard): Handle log2(0)
and log2(x < 0).
* sysdeps/i386/fpu/s_log2.S: Move...
* sysdeps/i386/fpu/e_log2.S: ...to here. Rename to __ieee754_log2.
* sysdeps/i386/fpu/s_log2f.S: Move...
* sysdeps/i386/fpu/e_log2f.S: ...to here. Rename to __ieee754_log2f.
* sysdeps/i386/fpu/s_log2l.S: Move...
* sysdeps/i386/fpu/e_log2l.S: ...to here. Rename to __ieee754_log2l.
* sysdeps/m68k/fpu/s_log2.S: Move...
* sysdeps/m68k/fpu/e_log2.S: ...to here. Rename to __ieee754_log2.
* sysdeps/m68k/fpu/s_log2f.S: Move...
* sysdeps/m68k/fpu/e_log2f.S: ...to here. Rename to __ieee754_log2f.
* sysdeps/m68k/fpu/s_log2l.S: Move...
* sysdeps/m68k/fpu/e_log2l.S: ...to here. Rename to __ieee754_log2l.
* sysdeps/ieee754/dbl-64/s_log2.c: Move...
* sysdeps/ieee754/dbl-64/e_log2.c: ...to here. Rename to
__ieee754_log2.
* sysdeps/ieee754/flt-32/s_log2f.c: Move...
* sysdeps/ieee754/flt-32/e_log2f.c: ...to here. Rename to
__ieee754_log2f.
2001-06-04 Jakub Jelinek <jakub@redhat.com>
* sysdeps/generic/w_exp2.c (u_threshold): Lower threshold so that
even arguments which result in denormalized exp2 are accepted.
(__exp2): Arguments equal to u_threshold already result into
underflow.
* sysdeps/generic/w_exp2f.c (u_threshold, __exp2f): Likewise.
* sysdeps/generic/w_exp2l.c (u_threshold, __exp2l): Likewise.
* sysdeps/ieee754/dbl-64/e_exp2.c (__ieee754_exp2): Lomark was too
low, with corrected lowmark use greaterequal, not greater.
* sysdeps/ieee754/flt-32/e_exp2f.c (__ieee754_exp2f): Likewise.
2001-06-04 Jakub Jelinek <jakub@redhat.com>
* math/libm-test.inc (ilogb_test): Test that ilogb(+-Inf) == INT_MAX.
* sysdeps/i386/fpu/s_ilogb.S (__ilogb): Return INT_MAX for +-Inf.
* sysdeps/i386/fpu/s_ilogbf.S (__ilogbf): Likewise.
* sysdeps/i386/fpu/s_ilogbl.S (__ilogbl): Likewise.
* sysdeps/ieee754/dbl-64/s_ilogb.c (__ilogb): Likewise.
* sysdeps/ieee754/flt-32/s_ilogbf.c (__ilogbf): Likewise.
* sysdeps/ieee754/ldbl-128/s_ilogbl.c (__ilogbl): Likewise.
* sysdeps/ieee754/ldbl-96/s_ilogbl.c (__ilogbl): Likewise.
2001-06-04 Jakub Jelinek <jakub@redhat.com>
* sysdeps/generic/w_coshl.c (__coshl): Test if finite argument
gave non-finite result instead of using constant in generic
version.
* sysdeps/generic/w_coshf.c (__coshf): Likewise.
* sysdeps/generic/w_cosh.c (__cosh): Likewise.
* sysdeps/generic/w_exp10.c (o_threshold, u_threshold): Remove.
(__exp10): Test if finite argument gave non-finite result.
* sysdeps/generic/w_exp10f.c (o_threshold, u_threshold, __exp10f):
Likewise.
* sysdeps/generic/w_exp10l.c (o_threshold, u_threshold, __exp10l):
Likewise.
2001-06-04 Jakub Jelinek <jakub@redhat.com>
* sysdeps/ieee754/ldbl-96/e_coshl.c (__ieee754_coshl): Fix
overflow threshold constant (log(LDBL_MAX)+M_LN2l).
2001-05-29 Bruno Haible <haible@clisp.cons.org>
* locale/programs/ld-ctype.c (idx_table): New struct type.
(idx_table_init, idx_table_get, idx_table_add): New functions.
(MAX_CHARNAMES_IDX): Remove macro.
(locale_ctype_t): Change type of charnames_idx field.
(ctype_startup): Change initialization of charnames_idx field.
(find_idx): Use idx_table_get and idx_table_add for speed.
* locale/programs/charmap.c (charmap_new_char): Fix ucs4 value
computation of characters in a range.
2001-05-29 Bruno Haible <haible@clisp.cons.org>
* iconvdata/gb18030.c (__fourbyte_to_ucs1): Add mappings for <U03F4>,
<U03F5>.
(__ucs_to_gb18030_tab1): Likewise.
(BODY for FROM_LOOP): Add mapping for <U00010000>..<U0010FFFF>.
(BODY for TO_LOOP): Likewise.
* iconvdata/tst-table-charmap.sh: Update for charmaps containing
<U00xxxxxx> syntax.
* iconvdata/tst-table-from.c (bmp_only): New variable.
(utf8_decode): If bmp_only, don't return characters outside Unicode
plane 0.
(main): When testing UTF-8 or GB18030, set bmp_only to 1. Don't print
a conversion line if utf8_decode returns NULL.
* iconvdata/tst-table-to.c (main): When testing encodings other than
UTF-8 and GB18030, loop upto U+30000 instead of U+10000. Use UTF-8
instead of UCS-2 as input.
* iconvdata/tst-table.sh: For GB18030, use only the part < 0x10000
of the charmap.
2001-05-29 Bruno Haible <haible@clisp.cons.org>
* iconvdata/cns11643l1.c: Update to Unicode 3.1.
(__cns11643l1_to_ucs4_tab): Regenerated.
(__cns11643l1_from_ucs4_tab12): Regenerated.
* iconvdata/cns11643.c: Update to Unicode 3.1.
(__cns11643l14_to_ucs4_tab): Remove array.
(__cns11643l3_to_ucs4_tab, __cns11643l4_to_ucs4_tab,
__cns11643l5_to_ucs4_tab, __cns11643l6_to_ucs4_tab,
__cns11643l7_to_ucs4_tab, __cns11643l15_to_ucs4_tab): New arrays.
(__cns11643_from_ucs4p0_tab): Renamed from __cns11643_from_ucs4_tab.
(__cns11643_from_ucs4p2_tab): New array.
* iconvdata/cns11643.h (__cns11643l14_to_ucs4_tab): Remove declaration.
(__cns11643l3_to_ucs4_tab, __cns11643l4_to_ucs4_tab,
__cns11643l5_to_ucs4_tab, __cns11643l6_to_ucs4_tab,
__cns11643l7_to_ucs4_tab, __cns11643l15_to_ucs4_tab): New declarations.
(cns11643_to_ucs4): Treat planes 3, 4, 5, 6, 7, 15 instead of 14.
(__cns11643_from_ucs4_tab): Remove declaration.
(__cns11643_from_ucs4p0_tab, __cns11643_from_ucs4p2_tab): New
declarations.
(ucs4_to_cns11643): Update for new arrays. Treat U+3400..U+4DFF and
U+20000..U+2A6D6.
* iconvdata/cns11643l2.h (__cns11643_from_ucs4_tab): Remove
declaration.
(__cns11643_from_ucs4p0_tab): New declaration.
(ucs4_to_cns11643l2): Update for new arrays.
* iconvdata/iso-2022-cn-ext.c (BODY for FROM_LOOP): Handle planes
3 to 7.
(BODY for TO_LOOP): Handle planes 3 to 7, instead of plane 14.
* iconvdata/EUC-TW.irreversible: New file.
* iconvdata/tst-table.sh: Use it.
* iconvdata/Makefile (distribute): Add CP1255.irreversible,
CP1258.irreversible, EUC-TW.irreversible.
2001-05-29 Bruno Haible <haible@clisp.cons.org>
* locale/C-translit.h.in: Add transliterations for new Unicode 3.1
mathematical symbols.
2001-05-29 Andreas Jaeger <aj@suse.de>
* sysdeps/ieee754/ldbl-128/e_acosl.c: New file, contributed by
Stephen L Moshier <moshier@mediaone.net>.
* math/libm-test.inc (sinh_test): Add new test case.
* sysdeps/ieee754/ldbl_96/e_sinhl.c (__ieee754_sinhl): sinhl(x) =
x when x < 2^-32.
Patch by Stephen L Moshier <moshier@mediaone.net>.
2001-05-22 Andreas Jaeger <aj@suse.de>
* sysdeps/ieee754/ldbl-128/s_log1pl.c: New file, contributed by
Stephen L Moshier <moshier@mediaone.net>.
2001-05-22 Martin Schwidefsky <schwidefsky@de.ibm.com>
* sysdeps/s390/s390-32/backtrace.c: Make backtrace return the
return addresses instead of the stack pointers.
* sysdeps/s390/s390-64/backtrace.c: Likewise.
2001-05-21 Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/ia64/sys/ucontext.h: Include
bits/sigcontext.h instead of bits/sigstack.h.
* sysdeps/unix/sysv/linux/ia64/bits/sigcontext.h: Add
multiple-inclusion guards.
2001-04-16 Stephen L Moshier <moshier@mediaone.net>
* sysdeps/ieee754/flt-32/e_asinf.c (pio2_hi, pio2_lo, pio4_hi):
Correct the values. (pSx, qSx): Replace by shorter approximation.
Use f suffix on float constants.
* sysdeps/ieee754/ldbl-128/k_tanl.c: New file.
Contributed by Stephen L Moshier <moshier@mediaone.net>.
2001-04-13 Ulrich Drepper <drepper@redhat.com>
* sysdeps/ieee754/ldbl-128/s_atanl.c: New file.
Contributed by Stephen L Moshier <moshier@mediaone.net>.
* sysdeps/unix/sysv/aix/dl-libc.c: Don't use the ELF version,
define simple replacements here. Patch by Michael Keezer.
* sysdeps/ieee754/ldbl-128/e_logl.c: New file.
* sysdeps/ieee754/ldbl-96/e_asinl.c: New file.
Contributed by Stephen L Moshier <moshier@mediaone.net>.
2000-10-14 Ulrich Drepper <drepper@redhat.com>
* math/libm-test.inc (frexp_test): Add L suffix also to parameters.
(hypot_test): Likewise.
* sysdeps/generic/printf_fphex.c: Compute width of decimal point
string correctly. Handle padding correctly.
* sysdeps/ia64/fpu/printf_fphex.c: Use sizeof in _itowa parameters
correctly.
* sysdeps/ieee754/ldbl-128/printf_fphex.c: Likewise.
* sysdeps/ieee754/ldbl-96/printf_fphex.c: Likewise.
2000-10-12 Alan Modra <alan@linuxcare.com.au>
* FAQ.in: Add --start-group and --end-group.
2000-10-12 Alan Modra <alan@linuxcare.com.au>
* malloc/memusage.c: Conditionalize stack usage calculation on
stack direction.
2000-10-12 Alan Modra <alan@linuxcare.com.au>
* config.h.in: Add ASM_LINE_SEP.
* configure.in: Add test for comment and line separators.
* include/libc-symbols.h: Define and use ASM_LINE_SEP, and add tabs to
placate some hppa assemblers.
* sysdeps/hppa/sysdep.h: Likewise.
* sysdeps/gnu/siglist.c: Insert \n and \t into inline asm.
* sysdeps/unix/sysv/linux/errlist.c: Likewise.
2000-10-12 David Huggins-Daines <dhd@linuxcare.com>
* sysdeps/unix/sysv/linux/Makefile: Include <bits/initspin> in
$(sysdep_headers).
* sysdeps/unix/sysv/linux/bits/initspin.h: Dummy version for
non-threaded platforms.
2000-10-12 David Huggins-Daines <dhd@linuxcare.com>
* configure.in: Add definitions for hppa.
* elf/elf.h: Add PLABEL32 relocation for hppa ELF32, comments
for IPLT and EPLT relocations.
* shlib-versions: Version symbol definitions for hppa-linux.
* sysdeps/unix/sysv/linux/configure.in: Define $arch_minimum_kernel
for hppa.
2000-10-12 David Huggins-Daines <dhd@linuxcare.com>
* sysdeps/hppa/Makefile: New file.
* sysdeps/hppa/Versions: New file.
* sysdeps/hppa/setjmp.S: New file.
* sysdeps/hppa/__longjmp.S: New file.
* sysdeps/hppa/bits/setjmp.h: New file.
* sysdeps/hppa/frame.h: New file.
* sysdeps/hppa/add_n.s: Don't use %r19 (linkage table pointer).
* sysdeps/hppa/sub_n.s: Likewise.
* sysdeps/hppa/lshift.s: Likewise.
* sysdeps/hppa/rshift.s: Likewise.
* sysdeps/hppa/udiv_qrnnd.s: Likewise.
* sysdeps/hppa/hppa1.1/addmul_1.s: Likewise.
* sysdeps/hppa/hppa1.1/submul_1.s: Likewise.
* sysdeps/hppa/hppa1.1/mul_1.s: Likewise.
* sysdeps/hppa/hppa1.1/udiv_qrnnd.s: Likewise.
* sysdeps/hppa/dl-machine.h: New file.
* sysdeps/hppa/dl-fptr.c: New file (note that this is almost
identical to the IA-64 one).
* sysdeps/hppa/dl-lookupcfg.h: Likewise.
* sysdeps/hppa/dl-symaddr.c: Likewise.
* sysdeps/hppa/elf/initfini.c: New file.
* sysdeps/hppa/elf/start.S: New file.
* sysdeps/hppa/fpu/bits/fenv.h: New file.
* sysdeps/hppa/fpu/fclrexcpt.c: New file.
* sysdeps/hppa/fpu/fedisblxcpt.c: New file.
* sysdeps/hppa/fpu/feenablxcpt.c: New file.
* sysdeps/hppa/fpu/fegetenv.c: New file.
* sysdeps/hppa/fpu/fegetexcept.c: New file.
* sysdeps/hppa/fpu/fegetround.c: New file.
* sysdeps/hppa/fpu/feholdexcpt.c: New file.
* sysdeps/hppa/fpu/fesetenv.c: New file.
* sysdeps/hppa/fpu/fesetround.c: New file.
* sysdeps/hppa/fpu/feupdateenv.c: New file.
* sysdeps/hppa/fpu/fegetexcptflg.c: New file.
* sysdeps/hppa/fpu/fraiseexcpt.c: New file.
* sysdeps/hppa/fpu/fsetexcptflg.c: New file.
* sysdeps/hppa/fpu/ftestexcept.c: New file.
* sysdeps/unix/sysv/linux/hppa/Makefile: New file.
* sysdeps/unix/sysv/linux/hppa/Versions: New file.
* sysdeps/unix/sysv/linux/hppa/syscalls.list: New file.
* sysdeps/unix/sysv/linux/hppa/sysdep.c: New file.
* sysdeps/unix/sysv/linux/hppa/sysdep.h: New file.
* sysdeps/unix/sysv/linux/hppa/bits/fcntl.h: New file.
* sysdeps/unix/sysv/linux/hppa/bits/ioctls.h: New file.
* sysdeps/unix/sysv/linux/hppa/bits/mman.h: New file.
* sysdeps/unix/sysv/linux/hppa/bits/sigaction.h: New file.
* sysdeps/unix/sysv/linux/hppa/bits/signum.h: New file.
* sysdeps/unix/sysv/linux/hppa/brk.c: New file.
* sysdeps/unix/sysv/linux/hppa/clone.S: New file.
* sysdeps/unix/sysv/linux/hppa/socket.S: New file.
* sysdeps/unix/sysv/linux/hppa/syscall.S: New file.
* sysdeps/unix/sysv/linux/hppa/setrlimit.c: New file.
* sysdeps/unix/sysv/linux/hppa/getrlimit.c: New file.
* sysdeps/unix/sysv/linux/hppa/getrlimit64.c: New file.
* sysdeps/unix/sysv/linux/hppa/kernel_sigaction.h: New file.
* sysdeps/unix/sysv/linux/hppa/kernel_stat.h: New file.
* sysdeps/unix/sysv/linux/hppa/mmap.c: New file.
* sysdeps/unix/sysv/linux/hppa/profil-counter.h: New file.
* sysdeps/unix/sysv/linux/hppa/procfs.h: New file.
* sysdeps/unix/sysv/linux/hppa/ucontext.h: New file.
* sysdeps/unix/sysv/linux/hppa/umount.c: New file.
2000-10-12 Alan Modra <alan@linuxcare.com.au>
* sysdeps/hppa/hppa1.1/Implies: New file.
* sysdeps/hppa/memusage.h: New file.
2000-10-09 Jakub Jelinek <jakub@redhat.com>
* sysdeps/ieee754/ldbl-128/s_nexttoward.c (__nexttoward): If x == y,
return y not x.
* manual/arith.texi (nextafter): Document it.
* sysdeps/ieee754/ldbl-96/s_nexttoward.c: Fix a comment.
* manual/intro.texi: Change reference from System Information to
System Management.
* manual/users.texi: Likewise.
* manual/conf.texi: Likewise.
* manual/sysinfo.texi: Document mount, umount, and umount2.
Patch by Bryan Henderson <bryanh@giraffe-data.com>.
2000-04-17 Jakub Jelinek <jakub@redhat.com>
* sysdeps/ieee754/ldbl-128/printf_fphex.c (PRINT_FPHEX_LONG_DOUBLE):
Create wnumstr as well as numstr to support wide character output
correctly.
2000-04-15 Jakub Jelinek <jakub@redhat.com>
* sysdeps/sparc/sparc64/Makefile: Remove sysdep-CFLAGS
modification and move it...
* sysdeps/unix/sysv/linux/sparc/sparc64/Makefile: ...here.
Add -melf64_sparc switch to $(LD) on sparc64-linux.
* sysdeps/unix/sysv/linux/sparc/sparc32/Makefile: Add -melf32_sparc
switch to $(LD) on sparc-linux.
2000-04-17 Thorsten Kukuk <kukuk@suse.de>
* sysdeps/unix/sysv/linux/sparc/sparc32/Makefile: Remove setresgid
and setresuid frm sysdep_routines.
2000-04-17 Ulrich Drepper <drepper@redhat.com>
* manual/resource.texi: ...here. New file. Document ulimit, vlimit,
and vtimes.
1999-07-15 Jakub Jelinek <jj@ultra.linux.cz>
* math/Makefile: Add t_sincosl and k_sincosl support routines.
* math/math_private.h (__kernel_sincosl): New declaration.
* sysdeps/generic/t_sincosl.c: New file.
* sysdeps/generic/k_sincosl.c: New file.
* sysdeps/ieee754/ldbl-128/k_cosl.c: New file.
* sysdeps/ieee754/ldbl-128/k_sinl.c: New file.
* sysdeps/ieee754/ldbl-128/k_sincosl.c: New file.
* sysdeps/ieee754/ldbl-128/t_sincosl.c: New file.
* sysdeps/ieee754/ldbl-128/e_rem_pio2l.c: New file.
* sysdeps/ieee754/ldbl-128/s_sincosl.c (__sincosl): Use
__kernel_sincosl.
* sysdeps/ieee754/ldbl-128/math_ldbl.h (GET_LDOUBLE_LSW64): New
definition.
