is_gdb_python_file is doing a similar test, so it can use this helper
function as well.
Signed-off-by: Adam Sampson <ats@offog.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
While working on a patch to add support for the extensible rseq ABI, we
came across an issue where a new 'const' variable would be merged with
the existing '__rseq_size' variable. We tracked this to the use of
'-fmerge-all-constants' which allows the compiler to merge identical
constant variables. This means that all 'const' variables in a compile
unit that are of the same size and are initialized to the same value can
be merged.
In this specific case, on 32 bit systems 'unsigned int' and 'ptrdiff_t'
are both 4 bytes and initialized to 0 which should trigger the merge.
However for reasons we haven't delved into when the attribute 'section
(".data.rel.ro")' is added to the mix, only variables of the same exact
types are merged. As far as we know this behavior is not specified
anywhere and could change with a new compiler version, hence this patch.
Move the definitions of these variables into an assembler file and add
hidden writable aliases for internal use. This has the added bonus of
removing the asm workaround to set the values on rseq registration.
Tested on Debian 12 with GCC 12.2.
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Starting with commit
59974938fe
elf/rtld: Count skipped environment variables for enable_secure
The new testcase elf/tst-tunables-enable_secure-env segfaults on s390 (31bit).
There _start parses the auxiliary vector for some additional checks.
Therefore it skips over the zeros after the environment variables ...
0x7fffac20: 0x7fffbd17 0x7fffbd32 0x7fffbd69 0x00000000
------------------------------------------------^^^last environment variable
... and then it parses the auxiliary vector and stops at AT_NULL.
0x7fffac30: 0x00000000 0x00000021 0x00000000 0x00000000
--------------------------------^^^AT_SYSINFO_EHDR--------------^^^AT_NULL
----------------^^^newp-----------------------------------------^^^oldp
Afterwards it tries to access AT_PHDR which points to somewhere and segfaults.
Due to not incorporating the skip_env variable in the computation of oldp
when shuffling down the auxv in rtld.c, it just copies one entry with AT_NULL
and value 0x00000021 and stops the loop. In reality we have skipped
GLIBC_TUNABLES environment variable (=> skip_env=1). Thus we should copy from
here:
0x7fffac40: 0x00000021 0x7ffff000 0x00000010 0x007fffff
----------------^^^fixed-oldp
This patch fixes the computation of oldp when shuffling down auxiliary vector.
It also adds some checks in the testcase. Those checks also fail on
s390x (64bit) and x86_64 without the fix.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
It turns out that quite a few applications use bundled mallocs that
have been built to use global-dynamic TLS (instead of the recommended
initial-exec TLS). The previous workaround from
commit afe42e935b ("elf: Avoid some
free (NULL) calls in _dl_update_slotinfo") does not fix all
encountered cases unfortunatelly.
This change avoids the TLS generation update for recursive use
of TLS from a malloc that was called during a TLS update. This
is possible because an interposed malloc has a fixed module ID and
TLS slot. (It cannot be unloaded.) If an initially-loaded module ID
is encountered in __tls_get_addr and the dynamic linker is already
in the middle of a TLS update, use the outdated DTV, thus avoiding
another call into malloc. It's still necessary to update the
DTV to the most recent generation, to get out of the slow path,
which is why the check for recursion is needed.
The bookkeeping is done using a global counter instead of per-thread
flag because TLS access in the dynamic linker is tricky.
All this will go away once the dynamic linker stops using malloc
for TLS, likely as part of a change that pre-allocates all TLS
during pthread_create/dlopen.
Fixes commit d2123d6827 ("elf: Fix slow
tls access after dlopen [BZ #19924]").
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
The conditionals for several mtrace-based tests in catgets, elf, libio,
malloc, misc, nptl, posix, and stdio-common were incorrect leading to
test failures when bootstrapping glibc without perl.
The correct conditional for mtrace-based tests requires three checks:
first checking for run-built-tests, then build-shared, and lastly that
PERL is not equal to "no" (missing perl).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Remove the definitions of HWCAP_IMPORTANT after removal of
LD_HWCAP_MASK / tunable glibc.cpu.hwcap_mask. There HWCAP_IMPORTANT
was used as default value.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Remove the environment variable LD_HWCAP_MASK and the tunable
glibc.cpu.hwcap_mask as those are not used anymore in common-code
after removal in elf/dl-cache.c:search_cache().
The only remaining user is sparc32 where it is used in
elf_machine_matches_host(). If sparc32 does not need it anymore,
we can get rid of it at all. Otherwise we could also move
LD_HWCAP_MASK / tunable glibc.cpu.hwcap_mask to be sparc32 specific.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Despite of powerpc where the returned integer is stored in tcb,
and the diagnostics output, there is no user anymore.
Thus this patch removes the diagnostics output and
_dl_string_platform for all other platforms.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The legacy hwcaps mechanism was removed with glibc 2.37:
See this commit series:
- d178c67535
x86_64: Remove platform directory library loading test
- 6099908fb8
elf: Remove legacy hwcaps support from the dynamic loader
- b78ff5a25d
elf: Remove legacy hwcaps support from ldconfig
- 4a7094119c
elf: Remove hwcap parameter from add_to_cache signature
- cfbf883db3
elf: Remove hwcap and bits_hwcap fields from struct cache_entry
- 78d9a1620b
Add NEWS entry for legacy hwcaps removal
- ab40f20364
elf: Remove _dl_string_hwcap
- e76369ed63
elf: Simplify output of hwcap subdirectories in ld.so help
According to Florian Weimer, this was an oversight and should also
have been removed.
As ldconfig does not generate ld.so.cache entries with hwcap/platform
bits in the hwcap-field anymore, this patch now skips those entries.
Thus currently only named-hwcap-entries and the default entries are
allowed.
For named-hwcap entries bit 62 is set and also the isa-level bits can
be set.
For the default entries the hwcap-field is 0.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The __stack_prot is used by Linux to make the stack executable if
a modules requires it. It is also marked as RELRO, which requires
to change the segment permission to RW to update it.
Also, there is no need to keep track of the flags: either the stack
will have the default permission of the ABI or should be change to
PROT_READ | PROT_WRITE | PROT_EXEC. The only additional flag,
PROT_GROWSDOWN or PROT_GROWSUP, is Linux only and can be deducted
from _STACK_GROWS_DOWN/_STACK_GROWS_UP.
Also, the check_consistency function was already removed some time
ago.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Linux 6.9 adds the ELF note type NT_ARM_FPMR. Add this to glibc's
elf.h, along with the previously missed NT_ARM_SSVE, NT_ARM_ZA and
NT_ARM_ZT (added in older kernel versions).
Tested for x86_64.
This has been confirmed to work around some interposed mallocs. Here
is a discussion of the impact test ust/libc-wrapper/test_libc-wrapper
in lttng-tools:
New TLS usage in libgcc_s.so.1, compatibility impact
<https://inbox.sourceware.org/libc-alpha/8734v1ieke.fsf@oldenburg.str.redhat.com/>
Reportedly, this patch also papers over a similar issue when tcmalloc
2.9.1 is not compiled with -ftls-model=initial-exec. Of course the
goal really should be to compile mallocs with the initial-exec TLS
model, but this commit appears to be a useful interim workaround.
Fixes commit d2123d6827 ("elf: Fix slow
tls access after dlopen [BZ #19924]").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This new note type is defined at https://systemd.io/ELF_DLOPEN_METADATA/
and is used to list shared library dependencies loaded via dlopen().
Distro packagers can use this, via tools like those available at
https://github.com/systemd/package-notes to automatically generate
dependencies when building projects that make use of this
specification.
By defining the note id here we can use it in other projects as a
stable identifier, for example in 'readelf' to pretty-print its
content.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Arjun Shankar <arjun@redhat.com>
Page was renamed some time ago, there's a redirect but better
to point to the right one
Signed-off-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Arjun Shankar <arjun@redhat.com>
There is no _dl_mcount_wrapper prototype in any installed header files.
Fix BZ #31765 by changing _dl_mcount_wrapper to a compat symbol and
obsolete it in glibc 2.40.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
This is mostly based on AArch64 and RISC-V implementation.
Add R_LARCH_TLS_DESC32 and R_LARCH_TLS_DESC64 relocations.
For _dl_tlsdesc_dynamic function slow path, temporarily save and restore
all vector registers.
Tunable with environment variables aliases are also ignored if
glibc.rtld.enable_secure is enabled. The tunable parsing is also
optimized a bit, where the loop that checks each environment variable
only checks for the tunables with aliases instead of all tables.
Checked on aarch64-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
And move it to parse_tunables. It avoids a string comparison for
each tunable.
Checked on aarch64-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The 680c597e9c commit made loader reject ill-formatted strings by
first tracking all set tunables and then applying them. However, it does
not take into consideration if the same tunable is set multiple times,
where parse_tunables_string appends the found tunable without checking
if it was already in the list. It leads to a stack-based buffer overflow
if the tunable is specified more than the total number of tunables. For
instance:
GLIBC_TUNABLES=glibc.malloc.check=2:... (repeat over the number of
total support for different tunable).
Instead, use the index of the tunable list to get the expected tunable
entry. Since now the initial list is zero-initialized, the compiler
might emit an extra memset and this requires some minor adjustment
on some ports.
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
Reported-by: Yuto Maeda <maeda@cyberdefense.jp>
Reported-by: Yutaro Shimizu <shimizu@cyberdefense.jp>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Also compile dl-misc.os with $(rtld-early-cflags) to avoid
Program received signal SIGILL, Illegal instruction.
0x00007ffff7fd36ea in _dl_strtoul (nptr=nptr@entry=0x7fffffffe2c9 "2",
endptr=endptr@entry=0x7fffffffd728) at dl-misc.c:156
156 bool positive = true;
(gdb) bt
#0 0x00007ffff7fd36ea in _dl_strtoul (nptr=nptr@entry=0x7fffffffe2c9 "2",
endptr=endptr@entry=0x7fffffffd728) at dl-misc.c:156
#1 0x00007ffff7fdb1a9 in tunable_initialize (
cur=cur@entry=0x7ffff7ffbc00 <tunable_list+2176>,
strval=strval@entry=0x7fffffffe2c9 "2", len=len@entry=1)
at dl-tunables.c:131
#2 0x00007ffff7fdb3a2 in parse_tunables (valstring=<optimized out>)
at dl-tunables.c:258
#3 0x00007ffff7fdb5d9 in __GI___tunables_init (envp=0x7fffffffdd58)
at dl-tunables.c:288
#4 0x00007ffff7fe44c3 in _dl_sysdep_start (
start_argptr=start_argptr@entry=0x7fffffffdcb0,
dl_main=dl_main@entry=0x7ffff7fe5f80 <dl_main>)
at ../sysdeps/unix/sysv/linux/dl-sysdep.c:110
#5 0x00007ffff7fe5cae in _dl_start_final (arg=0x7fffffffdcb0) at rtld.c:494
#6 _dl_start (arg=0x7fffffffdcb0) at rtld.c:581
#7 0x00007ffff7fe4b38 in _start ()
(gdb)
when setting GLIBC_TUNABLES in glibc compiled with APX.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
On some architectures and depending on the page size, the loader can
also allocate some memory during dependencies loading and it will be
marked as 'loader malloc'. However, if the system page size is
large enough, the initial data page will be enough for all required
allocation and there will be no extra loader mmap. To avoid false
negatives, the test does not check for such pages.
Checked on powerpc64le-linux-gnu with 64k pagesize.
Reviewed-by: Simon Chopin <simon.chopin@canonical.com>
When using the glibc.rtld.enable_secure tunable we need to keep track of
the count of environment variables we skip due to __libc_enable_secure
being set and adjust the auxv section of the stack. This fixes an
assertion when running ld.so directly with glibc.rtld.enable_secure set.
Add a testcase that ensures the assert is not hit.
elf/rtld.c:1324 assert (auxv == sp + 1);
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This reverts commit a1735e0aa8.
The test failure is a real valgrind bug that needs to be fixed before
valgrind is usable with a glibc that has been built with
CC="gcc -march=x86-64-v3". The proposed valgrind patch teaches
valgrind to replace ld.so strcmp with an unoptimized scalar
implementation, thus avoiding any AVX2-related problems.
Valgrind bug: <https://bugs.kde.org/show_bug.cgi?id=485487>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
None of the existing tests seem to cover the case where
_dl_signal_error is called without an active error handler.
The new elf/tst-rtld-does-not-exist test triggers such a
_dl_signal_error call from _dl_map_object.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
_dl_signal_error may be called with objname == NULL. _dl_exception_create
checks objname == NULL. But fatal_error doesn't. Check objname before
calling fatal_error. This fixes BZ #31596.
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
We would like to avoid statically defining any specific page size on
aarch64-gnu, and instead make sure that everything uses the dynamic
page size, available via vm_page_size and GLRO(dl_pagesize).
There are currently a few places in glibc that require EXEC_PAGESIZE
to be defined. Per Roland's suggestion [0], drop the static
GLRO(dl_pagesize) initializers (for now, only if EXEC_PAGESIZE is not
defined), and don't require EXEC_PAGESIZE definition for libio to
enable mmap usage.
[0]: https://mail.gnu.org/archive/html/bug-hurd/2011-10/msg00035.html
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-ID: <20240323173301.151066-4-bugaevc@gmail.com>
This patch adds a new feature for powerpc. In order to get faster
access to the HWCAP3/HWCAP4 masks, similar to HWCAP/HWCAP2 (i.e. for
implementing __builtin_cpu_supports() in GCC) without the overhead of
reading them from the auxiliary vector, we now reserve space for them
in the TCB.
This is an ABI change for GLIBC 2.39.
Suggested-by: Peter Bergner <bergner@linux.ibm.com>
Reviewed-by: Peter Bergner <bergner@linux.ibm.com>
The aarch64 uses 'trad' for traditional tls and 'desc' for tls
descriptors, but unlike other targets it defaults to 'desc'. The
gnutls2 configure check does not set aarch64 as an ABI that uses
TLS descriptors, which then disable somes stests.
Also rename the internal machinery fron gnu2 to tls descriptors.
Checked on aarch64-linux-gnu.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
ARM _dl_tlsdesc_dynamic slow path has two issues:
* The ip/r12 is defined by AAPCS as a scratch register, and gcc is
used to save the stack pointer before on some function calls. So it
should also be saved/restored as well. It fixes the tst-gnu2-tls2.
* None of the possible VFP registers are saved/restored. ARM has the
additional complexity to have different VFP bank sizes (depending of
VFP support by the chip).
The tst-gnu2-tls2 test is extended to check for VFP registers, although
only for hardfp builds. Different than setcontext, _dl_tlsdesc_dynamic
does not have HWCAP_ARM_IWMMXT (I don't have a way to properly test
it and it is almost a decade since newer hardware was released).
With this patch there is no need to mark tst-gnu2-tls2 as XFAIL.
Checked on arm-linux-gnueabihf.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Add a tunable for setting __libc_enable_secure to 1. Do not set
__libc_enable_secure to 0 if the tunable is set to 0. Ignore all
tunables if glib.rtld.enable_secure is set. One use-case for this
addition is to enable testing code paths that depend on
__libc_enable_secure being set without the need to use setxid binaries.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
When strcmp-avx2.S is used as the default, elf/tst-valgrind-smoke fails
with
==1272761== Conditional jump or move depends on uninitialised value(s)
==1272761== at 0x4022C98: strcmp (strcmp-avx2.S:462)
==1272761== by 0x400B05B: _dl_name_match_p (dl-misc.c:75)
==1272761== by 0x40085F3: _dl_map_object (dl-load.c:1966)
==1272761== by 0x401AEA4: map_doit (rtld.c:644)
==1272761== by 0x4001488: _dl_catch_exception (dl-catch.c:237)
==1272761== by 0x40015AE: _dl_catch_error (dl-catch.c:256)
==1272761== by 0x401B38F: do_preload (rtld.c:816)
==1272761== by 0x401C116: handle_preload_list (rtld.c:892)
==1272761== by 0x401EDF5: dl_main (rtld.c:1842)
==1272761== by 0x401A79E: _dl_sysdep_start (dl-sysdep.c:140)
==1272761== by 0x401BEEE: _dl_start_final (rtld.c:494)
==1272761== by 0x401BEEE: _dl_start (rtld.c:581)
==1272761== by 0x401AD87: ??? (in */elf/ld.so)
The assembly codes are:
0x0000000004022c80 <+144>: vmovdqu 0x20(%rdi),%ymm0
0x0000000004022c85 <+149>: vpcmpeqb 0x20(%rsi),%ymm0,%ymm1
0x0000000004022c8a <+154>: vpcmpeqb %ymm0,%ymm15,%ymm2
0x0000000004022c8e <+158>: vpandn %ymm1,%ymm2,%ymm1
0x0000000004022c92 <+162>: vpmovmskb %ymm1,%ecx
0x0000000004022c96 <+166>: inc %ecx
=> 0x0000000004022c98 <+168>: jne 0x4022c32 <strcmp+66>
strcmp-avx2.S has 32-byte vector loads of strings which are shorter than
32 bytes:
(gdb) p (char *) ($rdi + 0x20)
$6 = 0x1ffeffea20 "memcheck-amd64-linux.so"
(gdb) p (char *) ($rsi + 0x20)
$7 = 0x4832640 "core-amd64-linux.so"
(gdb) call (int) strlen ((char *) ($rsi + 0x20))
$8 = 19
(gdb) call (int) strlen ((char *) ($rdi + 0x20))
$9 = 23
(gdb)
It triggers the valgrind error. The above code is safe since the loads
don't cross the page boundary. Update tst-valgrind-smoke.sh to accept
an optional suppression file and pass a suppression file to valgrind when
strcmp-avx2.S is the default implementation of strcmp.
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
Compiler generates the following instruction sequence for GNU2 dynamic
TLS access:
leaq tls_var@TLSDESC(%rip), %rax
call *tls_var@TLSCALL(%rax)
or
leal tls_var@TLSDESC(%ebx), %eax
call *tls_var@TLSCALL(%eax)
CALL instruction is transparent to compiler which assumes all registers,
except for EFLAGS and RAX/EAX, are unchanged after CALL. When
_dl_tlsdesc_dynamic is called, it calls __tls_get_addr on the slow
path. __tls_get_addr is a normal function which doesn't preserve any
caller-saved registers. _dl_tlsdesc_dynamic saved and restored integer
caller-saved registers, but didn't preserve any other caller-saved
registers. Add _dl_tlsdesc_dynamic IFUNC functions for FNSAVE, FXSAVE,
XSAVE and XSAVEC to save and restore all caller-saved registers. This
fixes BZ #31372.
Add GLRO(dl_x86_64_runtime_resolve) with GLRO(dl_x86_tlsdesc_dynamic)
to optimize elf_machine_runtime_setup.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
After 78ca44da01
("elf: Relocate libc.so early during startup and dlmopen (bug 31083)")
we start seeing tst-nodeps2 failures when building the testsuite with
--enable-hard-coded-path-in-tests.
When building the testsuite with --enable-hard-coded-path-in-tests
the tst-nodeps2-mod.so is not built with the required DT_RUNPATH
values and the test escapes the test framework and loads the system
libraries and aborts. The fix is to use the existing
$(link-test-modules-rpath-link) variable to set DT_RUNPATH correctly.
No regressions on x86_64.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Add ELF_DYNAMIC_AFTER_RELOC to allow target specific processing after
relocation.
For x86-64, add
#define DT_X86_64_PLT (DT_LOPROC + 0)
#define DT_X86_64_PLTSZ (DT_LOPROC + 1)
#define DT_X86_64_PLTENT (DT_LOPROC + 3)
1. DT_X86_64_PLT: The address of the procedure linkage table.
2. DT_X86_64_PLTSZ: The total size, in bytes, of the procedure linkage
table.
3. DT_X86_64_PLTENT: The size, in bytes, of a procedure linkage table
entry.
With the r_addend field of the R_X86_64_JUMP_SLOT relocation set to the
memory offset of the indirect branch instruction.
Define ELF_DYNAMIC_AFTER_RELOC for x86-64 to rewrite the PLT section
with direct branch after relocation when the lazy binding is disabled.
PLT rewrite is disabled by default since SELinux may disallow modifying
code pages and ld.so can't detect it in all cases. Use
$ export GLIBC_TUNABLES=glibc.cpu.plt_rewrite=1
to enable PLT rewrite with 32-bit direct jump at run-time or
$ export GLIBC_TUNABLES=glibc.cpu.plt_rewrite=2
to enable PLT rewrite with 32-bit direct jump and on APX processors with
64-bit absolute jump at run-time.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
I've updated copyright dates in glibc for 2024. This is the patch for
the changes not generated by scripts/update-copyrights and subsequent
build / regeneration of generated files.
This is a minimal regression test for bug 29039 which only affects
targets with TLSDESC and a reproducer requires that
1) Have modid gaps (closed modules) with old generation.
2) Update a DTV to a newer generation (needs a newer dlopen).
3) But do not update the closed gap entry in that DTV.
4) Reuse the modid gap for a new module (another dlopen).
5) Use dynamic TLSDESC in that new module with old generation (bug).
6) Access TLS via this TLSDESC and the now outdated DTV.
However step (3) in practice rarely happens: during DTV update the
entries for closed modids are initialized to "unallocated" and then
dynamic TLSDESC calls __tls_get_addr independently of its generation.
The only exception to this is DTV setup at thread creation (gaps are
initialized to NULL instead of unallocated) or DTV resize where the
gap entries are outside the previous DTV array (again NULL instead
of unallocated, and this requires loading > DTV_SURPLUS modules).
So the bug can only cause NULL (+ offset) dereference, not use after
free. And the easiest way to get (3) is via thread creation.
Note that step (5) requires that the newly loaded module has larger
TLS than the remaining optional static TLS. And for (6) there cannot
be other TLS access or dlopen in the thread that updates the DTV.
Tested on aarch64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
