At this point, we can only abort the process because we have already
switched credentials on other threads. Returning an error would still
leave the process in an inconsistent state.
The new xtest needs root privileges to run.
This patch systematically renames miscellaneous tests so their outputs
use a *.out name (unless the test is just running some glibc program
with its conventional output file name, rather than a special program
at all, as in catgets tests generating *.cat). In the case of the
iconv test test-iconvconfig, output is redirected where it wasn't
before.
In various places the "generated" variable is updated to reflect the
revised test names; in iconvdata/Makefile a typo (mmtrace-tst-loading)
is also fixed. resolv/Makefile sets both "generate" (which appears
unused) and "generated". Bitrot in the settings of these variables
could no doubt be fixed so that "make clean" after build and testing
leaves results the same as after configure (and indeed the
tests-special / xtests-special variables could be used to simplify
things, by removing those files automatically rather than listing them
manually in these variables), and "make distclean" leaves an empty
build directory, but right now it appears various files don't get
deleted. I think they are liable to continue to bitrot in the absence
of routine testing that these targets actually work, given that
building in the source directory isn't supported and that was the main
use of such makefile targets.
Tested x86_64.
* elf/Makefile (tests-special): Rename tests to end with .out.
($(objpfx)noload-mem): Likewise.
($(objpfx)tst-leaks1-mem): Likewise.
($(objpfx)tst-leaks1-static-mem.out): Likewise.
* iconv/Makefile (xtests-special): Change test-iconvconfig to
$(objpfx)test-iconvconfig.out.
(test-iconvconfig): Change to $(objpfx)test-iconvconfig.out. Use
set -e inside subshell and redirect output to file.
* iconvdata/Makefile (generated): Rename tests to end with .out.
Correct type.
(tests-special): Rename tests to end with .out.
($(objpfx)mtrace-tst-loading): Likewise.
* intl/Makefile (generated): Likewise.
(tests-special): Likewise.
($(objpfx)mtrace-tst-gettext): Likewise.
* misc/Makefile (generated): Likewise.
(tests-special): Likewise.
($(objpfx)tst-error1-mem): Likewise.
* nptl/Makefile (tests-special): Likewise.
($(objpfx)tst-stack3-mem): Likewise.
(generated): Likewise.
* posix/Makefile (generated): Likewise.
(tests-special): Likewise.
(xtests-special): Likewise.
($(objpfx)tst-fnmatch-mem): Likewise.
($(objpfx)bug-regex2-mem): Likewise.
($(objpfx)bug-regex14-mem): Likewise.
($(objpfx)bug-regex21-mem): Likewise.
($(objpfx)bug-regex31-mem): Likewise.
($(objpfx)tst-vfork3-mem): Likewise.
($(objpfx)tst-rxspencer-no-utf8-mem): Likewise.
($(objpfx)tst-pcre-mem): Likewise.
($(objpfx)tst-boost-mem): Likewise.
($(objpfx)bug-ga2-mem): Likewise.
($(objpfx)bug-glob2-mem): Likewise.
* resolv/Makefile (generate): Likewise.
(tests-special): Likewise.
(xtests-special): Likewise.
(generated): Likewise.
($(objpfx)mtrace-tst-leaks): Likewise.
($(objpfx)mtrace-tst-leaks2): Likewise.
localedata:
* Makefile (generated): Rename tests to end with .out.
(tests-special): Likewise.
($(objpfx)mtrace-tst-leaks): Likewise.
This patch is a revised and updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>.
In order to generate overall summaries of the results of all tests in
the glibc testsuite, we need to identify and concatenate the files
with the results of individual tests.
Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this.
However, the normal glibc approach is explicit enumeration of the
expected set of files with a given property, rather than all files
matching some pattern like that. Furthermore, we would like to be
able to mark tests as UNRESOLVED if the file with their results is for
some reason missing, and in future we would like to be able to mark
tests as UNSUPPORTED if they are disabled for a particular
configuration (rather than simply having them missing from the list of
tests as at present). Such handling of tests that were not run or did
not record results requires an explicit enumeration of tests.
For the tests following the default makefile rules, $(tests) (and
$(xtests)) provides such an enumeration. Others, however, are added
directly as dependencies of the "tests" and "xtests" makefile
targets. This patch changes the makefiles to put them in variables
tests-special and xtests-special, with appropriate dependencies on the
tests listed there then being added centrally.
Those variables are used in Rules and so need to be set before Rules
is included in a subdirectory makefile, which is often earlier in the
makefile than the dependencies were present before. We previously
discussed the question of where to include Rules; see the question at
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a
discussion in
<https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why
Rules is included early rather than late in subdirectory makefiles.
It was necessary to avoid an indirection through the check-abi target
and get the check-abi-* targets for individual libraries into the
tests-special variable. The intl/ test $(objpfx)tst-gettext.out,
previously built only because of dependencies from other tests, was
also added to tests-special for the same reason.
The entries in tests-special are the full makefile targets, complete
with $(objpfx) and .out. If a future change causes tests to be named
consistently with a .out suffix, this can be changed to include just
the path relative to $(objpfx), without .out.
Tested x86_64, including that the same set of files is generated in
the build directory by a build and testsuite run both before and after
the patch (except for changes to the
elf/tst-null-argv.debug.out.<number> file name), and a build with
run-built-tests=no to verify there aren't any more obvious instances
of the issue Marcus Shawcroft reported with a previous version in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>.
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(tests): Depend on $(tests-special).
* Makerules (check-abi-list): New variable.
(check-abi): Depend on $(check-abi-list).
[$(subdir) = elf] (tests-special): Add
$(objpfx)check-abi-libc.out.
[$(build-shared) = yes && subdir] (tests-special): Add
$(check-abi-list).
[$(build-shared) = yes && subdir] (tests): Do not depend on
check-abi.
* Rules (tests): Depend on $(tests-special).
(xtests): Depend on $(xtests-special).
* catgets/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* conform/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* elf/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* grp/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* iconv/Makefile (xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* iconvdata/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* intl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable. Also add
$(objpfx)tst-gettext.out.
* io/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* libio/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* malloc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* misc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl_db/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* posix/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* resolv/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* stdio-common/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(do-tst-unbputc): Remove target.
(do-tst-printf): Likewise.
* stdlib/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* string/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* sysdeps/x86/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
localedata:
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information. No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.
This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules). Includes are added if needed, or moved up if already
present. Subdirectory "all:" targets are removed, since Makeconfig
provides one.
There is potential for further cleanups I haven't done. Rules and
Makerules have code such as
ifneq "$(findstring env,$(origin headers))" ""
headers :=
endif
to override to empty any value of various variables that came from the
environment. I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable. (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.) Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves. The special code to override values coming
from the environment would then be obsolete and could be removed.
Tested x86_64, including that installed binaries are identical before
and after the patch.
* argp/Makefile: Include Makeconfig immediately after defining
subdir.
* assert/Makefile: Likewise.
* benchtests/Makefile: Likewise.
* catgets/Makefile: Likewise.
* conform/Makefile: Likewise.
* crypt/Makefile: Likewise.
* csu/Makefile: Likewise.
(all): Remove target.
* ctype/Makefile: Include Makeconfig immediately after defining
subdir.
* debug/Makefile: Likewise.
* dirent/Makefile: Likewise.
* dlfcn/Makefile: Likewise.
* gmon/Makefile: Likewise.
* gnulib/Makefile: Likewise.
* grp/Makefile: Likewise.
* gshadow/Makefile: Likewise.
* hesiod/Makefile: Likewise.
* hurd/Makefile: Likewise.
(all): Remove target.
* iconvdata/Makefile: Include Makeconfig immediately after
defining subdir.
* inet/Makefile: Likewise.
* intl/Makefile: Likewise.
* io/Makefile: Likewise.
* libio/Makefile: Likewise.
(all): Remove target.
* locale/Makefile: Include Makeconfig immediately after defining
subdir.
* login/Makefile: Likewise.
* mach/Makefile: Likewise.
(all): Remove target.
* malloc/Makefile: Include Makeconfig immediately after defining
subdir.
(all): Remove target.
* manual/Makefile: Include Makeconfig immediately after defining
subdir.
* math/Makefile: Likewise.
* misc/Makefile: Likewise.
* nis/Makefile: Likewise.
* nss/Makefile: Likewise.
* po/Makefile: Likewise.
(all): Remove target.
* posix/Makefile: Include Makeconfig immediately after defining
subdir.
* pwd/Makefile: Likewise.
* resolv/Makefile: Likewise.
* resource/Makefile: Likewise.
* rt/Makefile: Likewise.
* setjmp/Makefile: Likewise.
* shadow/Makefile: Likewise.
* signal/Makefile: Likewise.
* socket/Makefile: Likewise.
* soft-fp/Makefile: Likewise.
* stdio-common/Makefile: Likewise.
* stdlib/Makefile: Likewise.
* streams/Makefile: Likewise.
* string/Makefile: Likewise.
* sunrpc/Makefile: Likewise.
(all): Remove target.
* sysvipc/Makefile: Include Makeconfig immediately after defining
subdir.
* termios/Makefile: Likewise.
* time/Makefile: Likewise.
* timezone/Makefile: Likewise.
(all): Remove target.
* wcsmbs/Makefile: Include Makeconfig immediately after defining
subdir.
* wctype/Makefile: Likewise.
libidn/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
localedata/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
(all): Remove target.
nptl/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
nptl_db/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
This patch splits makefile rules that generate a file then run cmp to
check the contents of that file into separate rules to generate and
compare the file. This simplifies making those tests generate PASS /
FAIL results, by removing the need to insert && between commands in
the test so that a $(evaluate-test) call is reached. It also avoids
the oddity of the .out file being an intermediate file rather than the
final result generated, as noted for some of these tests in
<https://sourceware.org/ml/libc-alpha/2012-10/msg00894.html>.
In many cases, the rule to run the program was no longer needed
because the default rules for running test programs on the host to
generate a .out file sufficed. (I'm not asserting the commands run
after this patch are *exactly* the same as before, simply that the
rules did nothing special that appeared deliberate or relevant to
anything about what the tests were testing. In cases where the rules
redirected stderr as well as stdout, I left the existing rule's
redirection in place to avoid changing what gets compared with the
expected results.)
It's clear there is a lot in common between the various -cmp.out rules
and it might be possible in future to refactor them into more generic
support for the case of comparing test output against a baseline.
(Some baselines are *.exp, some *.expect, some directly embedded in
the makefiles, and nptl/tst-cleanupx0.expect appears unused.)
Tested x86_64.
* elf/Makefile ($(objpfx)order.out): Remove rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)order-cmp.out.
($(objpfx)order-cmp.out): New rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)tst-array1-cmp.out, $(objpfx)tst-array1-static-cmp.out,
$(objpfx)tst-array2-cmp.out, $(objpfx)tst-array3-cmp.out,
$(objpfx)tst-array4-cmp.out, $(objpfx)tst-array5-cmp.out and
$(objpfx)tst-array5-static-cmp.out.
($(objpfx)tst-array1.out): Remove rule.
($(objpfx)tst-array1-cmp.out): New rule.
($(objpfx)tst-array1-static.out): Remove rule.
($(objpfx)tst-array1-static-cmp.out): New rule.
($(objpfx)tst-array2.out): Remove rule.
($(objpfx)tst-array2-cmp.out): New rule.
($(objpfx)tst-array3.out): Remove rule.
($(objpfx)tst-array3-cmp.out): New rule.
($(objpfx)tst-array4.out): Remove rule.
($(objpfx)tst-array4-cmp.out): New rule.
($(objpfx)tst-array5.out): Remove rule.
($(objpfx)tst-array5-cmp.out): New rule.
($(objpfx)tst-array5-static.out): Remove rule.
($(objpfx)tst-array5-static-cmp.out): New rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)order2-cmp.out.
($(objpfx)order2.out): Remove rule.
($(objpfx)order2-cmp.out): New rule.
($(objpfx)tst-initorder.out): Remove rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)tst-initorder-cmp.out.
($(objpfx)tst-initorder-cmp.out): New rule.
($(objpfx)tst-initorder2.out): Remove rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)tst-initorder2-cmp.out.
($(objpfx)tst-initorder2-cmp.out): New rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)tst-unused-dep-cmp.out.
($(objpfx)tst-unused-dep-cmp.out): Do not run cmp.
($(objpfx)tst-unused-dep-cmp.out): New rule.
* stdio-common/Makefile [$(run-built-tests) = yes] (tests): Depend
on $(objpfx)tst-setvbuf1-cmp.out.
($(objpfx)tst-setvbuf1.out): Do not run cmp.
($(objpfx)tst-setvbuf1-cmp.out): New rule.
* string/Makefile [$(run-built-tests) = yes] (tests): Depend
$(objpfx)tst-svc-cmp.out instead of $(objpfx)tst-svc.out.
($(objpfx)tst-svc.out): Remove rule.
($(objpfx)tst-svc-cmp.out): New rule.
nptl:
* Makefile ($(objpfx)tst-cleanup0.out): Do not run cmp.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)tst-cleanup0-cmp.out.
($(objpfx)tst-cleanup0-cmp.out): New rule.
This patch introduces two new convenience functions to set the default
thread attributes used for creating threads. This allows a programmer
to set the default thread attributes just once in a process and then
run pthread_create without additional attributes.
Resolves BZ #15618.
pthread_attr_getaffinity_np may write beyond bounds of the input
cpuset buffer if the size of the input buffer is smaller than the
buffer present in the input pthread attributes. Fix is to copy to the
extent of the minimum of the source and the destination.
This reverts the change that allows the POSIX Thread default stack size
to be changed by the environment variable
GLIBC_PTHREAD_DEFAULT_STACKSIZE. It has been requested that more
discussion happen before this change goes into 2.18.
[BZ #14652]
When a thread waiting in pthread_cond_wait with a PI mutex is
cancelled after it has returned successfully from the futex syscall
but just before async cancellation is disabled, it enters its
cancellation handler with the mutex held and simply calling a
mutex_lock again will result in a deadlock. Hence, it is necessary to
see if the thread owns the lock and try to lock it only if it doesn't.
[BZ #14417]
A futex call with FUTEX_WAIT_REQUEUE_PI returns with the mutex locked
on success. If such a successful thread is pipped to the cond_lock by
another spuriously woken waiter, it could be sent back to wait on the
futex with the mutex lock held, thus causing a deadlock. So it is
necessary that the thread relinquishes the mutex before going back to
sleep.
[BZ #14477]
Add an additional entry in the exception table to jump to
__condvar_w_cleanup2 instead of __condvar_w_cleanup for PI mutexes
when %ebx contains the address of the futex instead of the condition
variable.
When rlimit is small enough to be used as the stacksize to be returned
in pthread_getattr_np, cases where a stack is made executable due to a
DSO load get stack size that is larger than what the kernel
allows. This is because in such a case the stack size does not account
for the pages that have auxv and program arguments.
Additionally, the stacksize for the process derived from this should
be truncated to align to page size to avoid going beyond rlimit.
There is nothing in the POSIX specification to disallow a
single-threaded program from cancelling itself, so we forcibly enable
multiple_threads to allow the next available cancellation point in the
thread to run.
Also added additional tests to cover various cancellation scenarios.
At least the Linux kernel provides field where the kernel originally
stores the command which is executed by the thread. The value can
subsequently be overwritten. The added functions allow to do that for
threads, providing and abstraction around the syscalls or /proc file
system accesses needed.
The kernel from 2.3.31 on supports the rt_tgsigqueueinfo syscall.
Use it to implement the non-standard extension which, like
sigqueue, can pass additional data to the receiving thread.
* sem_init.c (__new_sem_init): Rewrite to initialize all three
fields in the structure.
(__old_sem_init): New function.
* sem_open.c: Initialize all fields of the structure.
* sem_getvalue.c: Adjust for renamed element.
* sysdeps/unix/sysv/linux/Makefile [subdir=nptl]
(gen-as-const-headers): Add structsem.sym.
* sysdeps/unix/sysv/linux/structsem.sym: New file.
* sysdeps/unix/sysv/linux/internaltypes.h: Rename struct sem to
struct new_sem. Add struct old_sem.
* sysdeps/unix/sysv/linux/sem_post.c: Wake only when there are waiters.
* sysdeps/unix/sysv/linux/i386/i486/sem_post.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/sem_post.S: Likewise.
* sysdeps/unix/sysv/linux/sem_wait.c: Indicate that there are waiters.
* sysdeps/unix/sysv/linux/i386/i486/sem_wait.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/sem_wait.S: Likewise.
* sysdeps/unix/sysv/linux/sem_timedwait.c: Likewise.
* sysdeps/unix/sysv/linux/i386/i486/sem_timedwait.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Likewise.
* Makefile (tests): Add tst-sem10, tst-sem11, tst-sem12.
* tst-sem10.c: New file.
* tst-sem11.c: New file.
* tst-sem12.c: New file.
* tst-typesizes.c: Test struct new_sem and struct old_sem instead
of struct sem.
2007-05-25 Ulrich Drepper <drepper@redhat.com>
* pthread_mutex_lock.c: Preserve FUTEX_WAITERS bit when dead owner
is detected.
* pthread_mutex_timedlock.c: Likewise.
* pthread_mutex_trylock.c: Likewise.
Patch in part by Atsushi Nemoto <anemo@mba.ocn.ne.jp>.
* Makefile (tests): Add tst-robust9 and tst-robustpi9.
* tst-robust9.c: New file.
* tst-robustpi9.c: New file.
2006-08-12 Ulrich Drepper <drepper@redhat.com>
[BZ #2843]
* pthread_join.c (pthread_join): Account for self being canceled
when checking for deadlocks.
* tst-join5.c: Cleanups. Allow to be used in tst-join6.
(tf1): Don't print anything after pthread_join returns, this would be
another cancellation point.
(tf2): Likewise.
* tst-join6.c: New file.
* Makefile (tests): Add tst-join6.
($(all-subdirs-targets)): Use it in place of -C option.
* Rules: Use $(..) instead of ../ if it's already defined.
* Makeconfig (subdir-srcdirs): New variable.
* csu/Makefile (all-Banner-files): Use it.
* configure.in (--enable-add-ons): Set to "yes" by default.
Handle absolute add-on directory names when looking for configure
fragments. Also look for sysdeps/*/preconfigure fragments in add-ons.
Require add-on configure to set $libc_add_on_canonical, use
that in $add_ons_sfx. Substitute add_on_subdirs with computed list
of subdir names each add-on configure set in libc_add_on_subdirs.
* configure: Regenerated.
* Makefile (%/preconfigure: %/preconfigure.in): New pattern rule.
* config.make.in (add-on-subdirs): New substituted variable.
* Makeconfig (all-subdirs): Include $(add-on-subdirs).
Remove $(add-ons), $(sysdep-subdirs).
Don't filter out $(sysdep-inhibit-subdirs).
($(common-objpfx)sysd-dirs): Target removed. Don't include it.
($(common-objpfx)sysd-sorted): Rewritten to feed Depend and Subdirs
files together to gen-sorted.awk, and $(subdirs) via -v.
(subdirs): Remove magic reordering for mach and hurd.
* scripts/gen-sorted.awk: Use subdirs from command line.
Process Subdirs and Depend files directly.
Let Subdirs files use "first dir" and "inhibit dir".
Always move elf to the end of the list.
* hurd/Depend: New file.
* sysdeps/mach/Subdirs: Use "first mach".
* Makefile (dist-separate): Remove linuxthreads.
(dist-separate-linuxthreads): Variable removed.
(glibc-%.tar rule): Use $(sysdeps-add-ons).
* Makerules ($(common-objpfx)Versions.v.i): Use $(subdirs),
not $(all-subdirs).
(sysdep-makefiles): Use $(sysdirs).
(sysdirs): Remove export.
($(+sysdir_pfx)sysd-rules): Handle absolute directory names in
$(config-sysdirs).
(+sysdir_pfx): Variable removed.
(sysd-rules): Use $(common-objpfx) in place of it.
(sysdirs): Variable moved to ...
* Makeconfig (sysdirs): ... here.
Handle absolute directory names in $(config-sysdirs).
(full_config_sysdirs): Variable removed.
* csu/Makefile: Use $(sysdirs) in vpath directive.
* math/Makefile (ulps-file): Use $(sysdirs).
* sysdeps/gnu/Makefile (errlist-c): Likewise.
($(objpfx)errlist-compat.c): Likewise.
* Makeconfig (all-Subdirs-files): Likewise.
($(common-objpfx)config.status): Likewise.
* configure.in (sysnames): Handle absolute add-on directory names.
(sysdeps_add_ons): New variable, AC_SUBST it.
Compute which add-ons contributed sysdeps directories.
* configure: Regenerated.
* config.make.in (sysdeps-add-ons): New substituted variable.
* Makerules (+sysdep_dirs, +sysdep-includes): Variables moved ...
* Makeconfig: ... to here.
(+sysdep_dirs): Append $(sysdeps-add-ons) here.
(+includes): Remove $(objpfx) include, already in $(+sysdep_dirs).
Remove $(includes).
(sysdep-makeconfigs): Use $(+sysdep_dirs).
($(common-objpfx)shlib-versions.v.i): Likewise.
* Makeconfig: Remove hair to set Makeconfig-add-on.
* sysdeps/unix/Makefile (sysdirs): Remove export.
(asm_CPP): Variable removed.
($(common-objpfx)sysd-syscalls): Pass them directly for the script.
* sysdeps/posix/Makefile: New file.
* Makerules (L_tmpnam, TMP_MAX, L_ctermid, L_cuserid): Set non-posix
values here with ?=.
* stdlib/gen-mpn-copy: File removed.
* stdlib/Makefile (distribute): Remove it.
* configure.in: Don't grok --with-gmp.
* configure: Regenerated.
* configure.in (libc_cv_idn): Don't check it; libidn/configure does it.
* configure: Regenerated.
* bare: Directory removed, saved in ports repository.
__openat64_not_cancel): Remove prototypes.
(__openat_nocancel, __openat64_nocancel): New prototypes or defines.
(openat_not_cancel, openat_not_cancel_3, openat64_not_cancel,
openat64_not_cancel_3): Use them.
* tst-initializers1-c99.c: New file.
* tst-initializers1-gnu89.c: New file.
* tst-initializers1-gnu99.c: New file.
* Makefile (tests): Add them.
(CFLAGS-tst-initializers1-c89.c): New variable.
(CFLAGS-tst-initializers1-c99.c): New variable.
(CFLAGS-tst-initializers1-gnu89.c): New variable.
(CFLAGS-tst-initializers1-gnu99.c): New variable.
are not understood by the C++ compiler.
* Makerules: Add rules to build C++ code for test cases.
* include/stdlib.h: Protect for inclusion in C++ code.
* include/time.h: Likewise.
* test-skeleton.c (timeout_handler): Rewrite ts initialization for
C++ compatibility.
PTHREAD_RECURSIVE_MUTEX_INITIALIZER_NP,
PTHREAD_ERRORCHECK_MUTEX_INITIALIZER_NP,
PTHREAD_MUTEX_ADAPTIVE_NP, PTHREAD_RWLOCK_INITIALIZER,
PTHREAD_RWLOCK_WRITER_NONRECURSIVE_INITIALIZER_NP,
PTHREAD_COND_INITIALIZER): Supply zeros for all fields
in the structure.
* Makefile (tests): Add tst-initializers1.
(CFLAGS-tst-initializers1.c): Set.
* tst-initializers1.c: New test.
2005-07-11 Jakub Jelinek <jakub@redhat.com>
* configure.in: Add --enable-stackguard-randomization option.
(ENABLE_STACKGUARD_RANDOMIZE): New define.
* config.h.in (ENABLE_STACKGUARD_RANDOMIZE): Add.
* sysdeps/unix/sysv/linux/dl-osinfo.h: Include stdint.h.
(_dl_setup_stack_chk_guard): New inline function.
* sysdeps/generic/dl-osinfo.h: Include stdint.h.
(_dl_setup_stack_chk_guard): New inline function.
* elf/rtld.c (__stack_chk_guard): New variable.
(dl_main): Remove all traces of TLS_INIT_TP_EXPENSIVE.
Set __stack_chk_guard to _dl_setup_stack_chk_guard (),
use THREAD_SET_STACK_GUARD if defined.
* elf/Versions (ld): Export __stack_chk_guard@@GLIBC_2.4.
* sysdeps/generic/libc-start.c (__stack_chk_guard): New variable.
(__libc_start_main): Set __stack_chk_guard to
_dl_setup_stack_chk_guard (), use THREAD_SET_STACK_GUARD if defined.
* sysdeps/generic/libc-tls.c (__libc_setup_tls): Remove all
traces of TLS_INIT_TP_EXPENSIVE.
* debug/Versions (libc): Export __stack_chk_fail@@GLIBC_2.4.
* debug/Makefile (routines): Add stack_chk_fail.
(static-only-routines): Add stack_chk_fail_local.
* debug/stack_chk_fail_local.c: New file.
* debug/stack_chk_fail.c: New file.
* elf/Makefile: Add rules to build and run tst-stackguard1{,-static}
tests.
* elf/tst-stackguard1.c: New file.
* elf/tst-stackguard1-static.c: New file.
* elf/stackguard-macros.h: New file.
2004-12-07 Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/ia64/clone2.S (__clone2): Add support for
NPTL where the PID is stored at userlevel and needs to be reset when
CLONE_THREAD is not used. Restore gp before calling _exit.
2004-12-04 Ulrich Drepper <drepper@redhat.com>
* sysdeps/unix/sysv/linux/i386/clone.S: Add support for NPTL where
the PID is stored at userlevel and needs to be reset when CLONE_THREAD
is not used.
* sysdeps/unix/sysv/linux/86_64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/arm/clone.S: Update uses of RETINSTR.
* sysdeps/unix/sysv/linux/arm/mmap.S: Likewise.
* sysdeps/unix/sysv/linux/arm/mmap64.S: Likewise.
* sysdeps/unix/sysv/linux/arm/socket.S: Likewise.
* sysdeps/unix/sysv/linux/arm/sysdep.h: Likewise.
* sysdeps/unix/sysv/linux/arm/vfork.S: Likewise.
$(lib)-static-only-routines is nonempty.
(extra-objs, o-iterator.mk rule): Filter out .oS from generators.
Add a special rule for .oS objects -> _nonshared.a library.
2004-11-20 Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/bits/socket.h (SCM_RIGHTS): Avoid
comma at the end of enum if __USE_BSD is not defined.
(calc_inveclosure, calc_eclosure): Skip OP_DELETED_SUBEXP nodes.
